Upload
others
View
31
Download
2
Embed Size (px)
Citation preview
Electronic Heavy Duty Throttle Pedal 962 000 series
Page 1 of 9
MCS – November 2017
Electronic Heavy Duty Throttle
Pedal 962 000 series
Electronic Heavy Duty Throttle Pedal 962 000 series
Page 2 of 9
MCS – November 2017
1. Mechanical Specifications:
Two “built-in” return springs
Additional return spring built in the sensor
Die cast aluminium treadle and mounting plate
Complies with FMVSS 124
Travel angle 22°
Angle option 30°, 35°, 45°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:
Kick down virtual feedback and kick down signal
Twin sensors
Connector kit or customized wire harness
Technical specification sheet and part numbers are available uponrequest
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Suspended Throttle Pedal 963 000 series
Page 1 of 8
MCS – November 2017
Electronic Suspended Throttle
Pedal 963 000 series
Electronic Suspended Throttle Pedal 963 000 series
Page 2 of 8
MCS – November 2017
1. Mechanical Specifications:
Two “built-in” return springs
Polyamide (injection molded) PA66 + 30% Glass Fiber
Complies with FMVSS 124
Travel angle 24°
Pedal angle is rest position 15°
Protection classification IP69K
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:
Magnetic kick down virtual feedback with optional kick downsignal
Twin sensors ( 4 signals )
Swivel arm
Connector kit or customized wire harness
Technical specification sheet and part numbers are available uponrequest
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module
Available programmable sensor models: Please, refer to pages 3 and 4
Electronic Dual Acting Foot Pedal 964 000 series
Page 1 of 8
MCS – November 2017
Electronic Dual Acting Foot Pedal
964 000 series
Electronic Dual Acting Foot Pedal 964 000 series
Page 2 of 8
MCS – November 2017
1. Mechanical Specifications:
Two “built-in” return springs
Die cast aluminium treadle support and mounting plate
Zinc plated treadle with 500 hours salt spray protection
certified
Travel angle +/- 15°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:
Wide treadle plate
Adjustable plate (15°, 25° or 35°)
Hand lever
Rubber cover
Twin sensors
Connector kit or customized wire harness
Technical specification sheet and part numbers are available uponrequest
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Controls will allow a smooth and precise control of your throttle control, hydrostatic drive control or implement control application.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Controls can be connected directly to the Electronic Control Module.
For Available programmable sensor models, please refer to pages 3 and 4.
Electronic Floor Mounted Throttle Pedal 965 000 series
Page 1 of 13
MCS – November 2017
Electronic Floor Mounted Throttle
Pedal 965 000 series
Electronic Floor Mounted Throttle Pedal 965 000 series
Page 2 of 13
MCS – November 2017
1. Mechanical Specifications:
Two “built-in” return springs
Polyamide (injection molded) PA66 + 30% Glass Fiber
Long or short treadle plate
Interchangeable with 962000 series or wide base
Complies with FMVSS 124
Travel angle 22°
Angle option 30°, 35°, 45°
Protection classification IP69K
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:
Magnetic kick down virtual feedback with optional kick downsignal
Swivel arm
Connector kit or customized wire harness
Technical specification sheet and part numbers are available uponrequest
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Ergonomic Throttle Pedal 966 000 series
Page 1 of 12
MCS – November 2017
Electronic Ergonomic Throttle
Pedal 966 000 series
Electronic Ergonomic Throttle Pedal 966 000 series
Page 2 of 12
MCS – November 2017
1. Mechanical Specifications:
The activation forces of the pedal are equal to 16N in the idle position and33N in the full position. Those values are measured at 200mm of the pedalrotation point.
Polyamide (injection molded) PA66 + 30% Glass Fiber
Adaptable mounting plate (interchangeable with 962000 or 965000 wideseries)
Complies with FMVSS 124
Travel angle 17°
Angle option 33°, 39°, 45°, 51°
Protection classification At least IP66 (IP67 if LHE sensor) Test can increase the IP class
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins
Options: Mechanical Kick down virtual feedback and kick down signal
(activation at 15° of the travel angle) Swivel arm Mechanical switch (NC or NO switch signal) Inclination of the sensor (20°) Connector kit or customized wire harness
Technical specification sheet and part numbers are available uponrequest
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 4 and 5.
Agricultural Suspended Electronic Throttle Pedal
967 000 series
Page 1 of 8
MCS – November 2017
Agricultural Suspended Electronic Throttle Pedal
967 000 series
Agricultural Suspended Electronic Throttle Pedal
967 000 series
Page 2 of 8
MCS – November 2017
1. Mechanical Specifications:
Three “built-in” return springs (return force is customized according tocustomer specificationThree activation torques are available:
Act. Torque 1 [Nm] Act. Torque 2 [Nm] Act. Torque 3 [Nm]
Idle 4,5 3,8 7
Full (20°) 9,6 6,67 14.4
Material: PA66 - GF30 / Steel
Travel angle: max 20°.
Full throttle is reached when pedal pad stops on the cabin floor
Sensor and AMP 6 pins connector are IP69K
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Options: Customized pedal lever
Customized mounting plate
Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Top Mounted Hand Throttle 972 000 series
Page 1 of 7
MCS – November 2017
Electronic Top Mounted
Hand Throttle 972 000 series
Electronic Top Mounted Hand Throttle 972 000 series
Page 2 of 7
MCS – November 2017
1. Mechanical Specifications:
Adjustable actuating force
No return spring
Allows engine constant RPM at selected rate through lever position
Easy to use in combination with Throttle Pedal or Throttle Position Sensor
Very convenient whenever engine is operated from a/several remote stations
certified
Travel angle 90°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options: Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Rotary Throttle 973 000 series
Page 1 of 7
MCS – November 2017
Electronic Rotary Throttle
973 000 series
Electronic Rotary Throttle 973 000 series
Page 2 of 7
MCS – November 2017
1. Mechanical Specifications:
Adjustable actuating force
No return spring
Allows engine constant RPM at selected rate through button position
Easy to use in combination with Throttle Pedal or Throttle Position Sensor
Very convenient whenever engine is operated from a/several remote stations
certified
Travel angle 90°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options: Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Throttle Position Sensor 974 000 series
Page 1 of 8
MCS – November 2017
Throttle Position Sensor
974 000 series
Throttle Position Sensor 974 000 series
Page 2 of 8
MCS – November 2017
1. Mechanical Specifications:
One return spring
One additional external return spring required on throttle mechanism inorder to be FMVSS 124 compatible
Easy to be fitted on an existing pedal cable or linkage
certified
Travel angle 42°
Protection classification IP69K
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:IP69K protection Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with FMVSS 124 and 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please, refer to pages 3 and 4.
Throttle Position Sensor 974 000 series
Page 1 of 8
MCS – November 2017
Throttle Position Sensor
974 000 series
Throttle Position Sensor 974 000 series
Page 2 of 8
MCS – November 2017
1. Mechanical Specifications:
One return spring
One additional external return spring required on throttle mechanism inorder to be FMVSS 124 compatible
Easy to be fitted on an existing pedal cable or linkage
certified
Travel angle 42°
Protection classification IP69K
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:IP69K protection Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with FMVSS 124 and 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please, refer to pages 3 and 4.
Electronic Side Mounted Hand Throttle 975 000 series
Page 1 of 7
MCS – November 2017
Electronic Side Mounted
Hand Throttle 975 000 series
Electronic Side Mounted Hand Throttle 975 000 series
Page 2 of 7
MCS – November 2017
1. Mechanical Specifications:
Adjustable actuating force
No return spring
Allows engine constant RPM at selected rate through lever position
Easy to use in combination with Throttle Pedal or Throttle Position Sensor
Very convenient whenever engine is operated from a/several remote stations
certified
Travel angle 90°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins - waterproof (IP69)
Options:Connector kit or customized wire harness
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Finger-tip Hand Throttle 977 000 series
Page 1 of 7
MCS – November 2017
Electronic Finger-tip Hand Throttle
977 000 series
Electronic Finger-tip Hand Throttle 977 000 series
Page 2 of 7
MCS – November 2017
1. Mechanical Specifications:
Two different actuating force values (3N or 5N with tolerances of 1N)
No return spring
Allows engine constant RPM at selected rate through lever position
Easy to use in combination with Throttle Pedal or Throttle Position Sensor
Very convenient whenever engine is operated from a/several remote stations
Possibility to adapt the knob colour (standard = RAL2003)
certified
Travel angle 60°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins
Options:- Connector kit or customized wire harness- Adjustable position of the knob- 2 available operating forces
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
Electronic Rotary Throttle 978 000 series
Page 1 of 9
MCS – November 2017
Electronic Rotary Throttle
978 000 series
Electronic Rotary Throttle 978 000 series
Page 2 of 9
MCS – November 2017
1. Mechanical Specifications:
2 possible travel angles (90° or 210°)
No return spring
Allows engine constant RPM at selected rate through button position
Easy to use in combination with Throttle Pedal or Throttle Position Sensor
Very convenient whenever engine is operated from a/several remote stations
certified
Travel angle 90° or 210°
Protection classification IP66 (IP67 if LHE sensor)
Storage temperature -40°C to +95°C
Operating temperature -40°C to +85°C
Connector AMP - 6 pins
Options:- Connector kit or customized wire harness- Three different knobs available (black, orange or overmolding knob)- Four different positions for the knob- Mounting plate- Button fixation with screws or nut
Technical specification sheet and part numbers are available upon request
2. Electrical Specifications:
Complies with 72/245/EEC
E1 number 03 5754
All Electronic Throttle Controls are fitted with programmable Hall Effect Sensors.
The signals generated by the Electronic Throttle Controls will allow a smooth and precise engine speed control.
The output values are programmable and hence can be adapted to the customer’s specifications. Electronic Throttle Controls can be connected directly to the engine management system, or engine Electronic Control Module.
For available programmable sensor models, please refer to pages 3 and 4.
MCS – January 2013
CAN J1939 THROTTLE CONTROLS
General Description: The CAN J1939 Throttle Control has been developed to be connected to vehicles
equipped with a CAN bus network (typically on/off highway vehicles).
The throttle position is identified through a twin analogue Hall Effect sensor, and isconverted into programmable CAN J1939 messages according to standard SAEJ1939 protocol.
All MCS programmable throttle controls are available with CAN J1939 protocol.
J1939 Parameters: J1939 Messages and signals can be activated according to MCS Throttle default
values or customer specifications.
J1939 Parameters like SA (Source Address) or NAME fields can be set according toMCS Throttle default values or customer specifications.
Optional messages such as DTC (DMx, FMI, MIL, …) can be activated uponcustomer request.
Electrical specifications: Power Supply +8 .. 32VDC
Current consumption 40mA max.
J1939 Connector Deutsch #DT06-3S ( J1939/11 )
CONTACT FACTORY FOR ADDITIONAL INFORMATION
MCS Mobile Control Systems s.a. rue de Lusambo, 34A Tel. : +32-2-345.18.10 B-1190 Brussels Fax : +32-2-343.94.23 BELGIUM www.mcs-belgium.com
Email : [email protected]
Hall Effect Position Sensors
Page 2 of 9
MCS – January 2010
1 General description
962 640 070 962 640 120 962 630 YY XXX
Supply 5 V, 6 mA max 5 V, 6 mA max per signal
Output signal Analogue voltage Analogue voltage
Sealing grade IP 67 / IP 69
with mounted wire harness IP 67 / IP 69
with mounted wire harness Temperature range - 40°C to + 120°C (1h at 130°C) - 40°C to + 120°C (1h at 130°C)
Angle range (degrees) 70 120 30 or 60 or 90 or 120
Connector AMP / MQS 6 Pins AMP / MQS 6 Pins
962 640 01 070 ( 1 signal, angle range 70° ) 962 630 01 XXX ( 1 signal ) 962 640 01 120 ( 1 signal, angle range 120°) 962 630 02 XXX ( 2 signals identical )
962 630 03 XXX (2 signals increasing S1 =2 x S2 )