Crack mobil editM5F8C-FHACG-C8FYU-4H47J-13S2A Name: Taikonaut **Note: turn off automatic update** ...

oxygenBaoW1Mb6yi9WgBg/yz+LlFgHmb9GUE0UKRzq4OPt50J1LwsPUnsme2thUveLJxhZ

oxygen sym666666-111-rku

Kode Rahasia HP CDMA Dan GSMBERITA - dooney285.wordpress.com - Kode Rahasia HP CDMA dan GSMCDMASamsungSamsung sph-n240, n400, a460, a500, etc Nam Programming:Nam Set: ##SpcTest Mode: 47*869#1235Debug Menu: ##33284,okService Menu: Menu+8+0 (#889)Reset (Life time, Clear Memory, etc): ##786,okA-key: ##2539,okLabel Selection: ##3882,okLabel(Home, Work, etc) : **523,okNGG Setting (Gateway, etc.): ##2769737,okVocoder: ##8626337,okCAI Change: ##7738,okEnable TTY: ##889,ok

NokiaNAM set : 3001#12345# atau #626#7764726#Software Version : #837# atau #0000#ESN : #92772689#Phone Restart : #75681# atau #75682#Vocoder : #3872#Debug Screen/EVRC : #8378#Debug : #8380#Field Test Menu : #83788#To activate Net Monitor menutype *3001#12345#scroll to Field Testenable (it says something about switching your phone off)exit menusturn offswitch on

menuNet MonitorEnter display/group code (eg 3101 for link info or []Nokia Nokia 3280, Lihat Sumbernya

ode Rahasia HP CDMA dan GSMPosted by BLUE SOFTWARE at 8:19 PM . Thursday, September 25, 2008 Labels: HP

Pengetahuan tentang HP sangat di perlukan terutama bagi temen-temen yang berninat buka service HP, tapi bagai pemegang HP ni juga diperlukan biar tidak di katakan gaptek hehehe moga berguna bagai temen-temen dan selamat mencobaKode Rahasia Pertama produk dari

CDMA

–Samsung

Samsung sph-n240, n400, a460, a500, etc Nam Programming:Nam Set: ##SpcTest Mode: 47*869#1235Debug Menu: ##33284,okService Menu: Menu+8+0 (#889)Reset (Life time, Clear Memory, etc): ##786,okA-key: ##2539,okLabel Selection: ##3882,okLabel(Home, Work, etc) : **523,okNGG Setting (Gateway, etc.): ##2769737,okVocoder: ##8626337,okCAI Change: ##7738,okEnable TTY: ##889,ok

Nokia

NAM set : 3001#12345# atau #626#7764726#Software Version : #837# atau #0000#ESN : #92772689#Phone Restart : #75681# atau #75682#Vocoder : #3872#Debug Screen/EVRC : #8378#Debug : #8380#Field Test Menu : #83788#To activate Net Monitor menutype *3001#12345#scroll to Field Test

enable (it says something about switching your phone off)exit menusturn offswitch onmenuNet MonitorEnter display/group code (eg 3101 for link info or […]Nokia Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280Programming:Nam Set: *3001#12345#Software Version: *#837#Software Version: *#9999#Esn Number: *#92772689#Restart Phone: *#75681#Restart Phone: *#75682#Nokia 8887 Nam Programming:Nam Set: *3001#12345#Version: *#0000#Evrc: *#8378#Esn/Data/Timer: *#92772689#SID: *#743#

–Ericsson (sebelum joint-venture dengan Sony dan berubah menjadi SE)

Programming Shot NAM : 987 + menuProgramming long NAM : 923885 + menu and enterSPC : “0000”CDMA mode : 904093 + menuAnalog Mode : 904095 + menuDM Mode : 904959 + menu–Sony (sebelum joint-venture dengan Ericsson dan berubah menjadi SE)CM-M1300/3300/Z200Programming : type “111111” and press JOG DIALChoose Programming andEnter SPC : “000000”

–LG

LGC-300Programming : menu + 9 and enter SPC:”000000”A-key : press STO for sometime enter zoneType 2539** and enter A-keyLGC-510 Programming : menu + 3 + 0 and enter SPC: “000000”LGC-800W/500 : menu + 0 and enter SPC: “000000”LGC-330W Programming : menu + 4 + 0 and enter SPC: “000000”gc-300, etc Nam Programming:Nam Set: Menu, 9, SpcA-key: Press “Sto” 3sec, 2539**lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, SpcA-key: 2539**lgc-510, v111, etc Nam Programming:Nam Set: Menu, 3, 0, SpcA-key: 2539**lgc-500, 800w, etc Nam Programming:Nam Set: Menu, 9 , 0, SpcDebug Mode: Menu, 7, 0, FscDebug Mode: Menu, 8, 0, FscA-key: 2539**Lg LX,VX-series, […]

–Motorola

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:Nam Set: Fcn,0000000000000, RclNam Set: 74663#, Fcn, FcnTest Mode: Fcn, 00**83786633, StoMotorola v60c, v120c etc Nam Programming:Nam Set: 74663#, Menu, Menu, SpcNam Set: Menu, 073887, * (type quickly)Test Mode: Menu, 073887*, SpcDebug Mode: ##33284Force the phone into DIGITAL ONLY mode:1) ##33284 (Debug)2) RIGHT Softkey (Next) Twice3) Down […]Star TAC 7760/7860Programming : FCN + 0 + 000000 + 000000 + RCLTest Mode : FCN 00*83786633 STOV 60c ProgrammingService Menu : 74663#menu (Programming Code)Test Mode : Menu 073887*Security Code : 000000

–Kyocera

Qualcomm qcp-800 Nam Pogramming:Nam Set: Menu+3+0+SpcField Test: Menu+7+0+FscKyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:Nam Set: 111111+Jog Dial(Ok), Select “Programming”+SpcCAI Change: ##7738,okEnable TTY: ##889,okLife Timer, PRL, etc: ##786,okA-key: ##2539,okA-key: 2539,okTips:On some kyocera handsets the factory service module has not been disabled

and the phone can be programmed without the spc by inputting.Nam Set: ##333333 […]

–Sanyo

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:Nam Set: ##Spc+Ok+Key Down+OkAdvanced Setup: ##3282+Ok+Key Down+Ok+MslA-key: ##2539+Ok+Key Down+OkVersion: ##**837+Ok+Key Down+OkDebug Menu: ##FSC+Ok+Key Down+OkAirtime menu: ##8463+Ok+Key Down+OkChange CAI: ##7738+Ok+Key Down+OkVocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+OkSet IP Address: ##2769737+Ok+Key Down+OkTTY On/Off: ##889+Ok+Key Down+OkReady Link: ##4636+Ok+Key Down+OkBrowser Init On/Off: ##4682+Ok+Key Down+OkPicture Token: ##25327+Ok+Key Down+OkUnknown Code: ##5282277+Ok+Key Down+Ok(SPC=000000, FSC=040793)

GSM

–SAMSUNG

Phone Lock : *2767*2878#Phone Reset : *2767*3855#Display IMEI : *#06#Java Reset : *2767*5282#WAP Reset : *2767*927#Reset Media : *2767*63342#Help Menu : *#9998*4357#Java Menu : *#9998*5282#Monitor Mode : *#9999#0#Software Version : *#9999# or *#9998*9999#Hardware Version : *#9999# or *#9998*8888#Sim Info : *#9998*746# or *#0746#Display Contras : *#9998*523# or *#0523#Vibra On : *#9998*842# or *#0842#Buzzer On : *#9998*289# or *#0289#Baterry and field info : *#9998*288# or *#0288#Error Log : *#9998*377# or *#0377#Sim service table : *#9998*778# or *#0778#Show date and alarm : *#9998*782# or *#0782#Show network info : *#8999*638#Change Operator Logo : *#8999*5646#

Production Number : *#9998*76#View Melody Alarm : *#9998*968#Non Volatile Memory : *#9998*585#Digital Audio Interference off: *#3243948#Digital Audio Interference : *#32436837#Show Software Version : *#9999#Intruction Software : *#0837#Show Serial Parameter : *#0001#

–SONY

Display IMEI : *#06#Unlock Code : *#7465625*12*xxxxxxxx#Sim Code : *#7465625*XX*xxxxxxxx#(untuk “XX”) adalah :-NCK lock : 12-Provider Lock : 22-Network Lock : 32-SIM Code Lock : 42-Subset Lock : 52-Corporate Lock : 62-IMSI Personal : 72-IMSI Range : 99

WAP Code : *#9275625*11*xxxxxxxx#Changes Language : *#00xx# (“xx” Country Code)Reset Language : *#0000000#Display SIM lock Status : *#7465625#Display Firmware Version : *#7353273#Super Factory Reset : *#78737322867973738#Reset Security Code : *#73287489263373738#Turns PIN Code On : *09* (PIN Code)#Turns PIN Code Off : #09* (PIN Code)#

–SONY ERICSSON

Display IMEI : *#06#Lock Menu : <**<>*<<*<* –SHARP Display IMEI : *#06# Mep Lock Menu : *01763*6371# Show Software Version : *01763*8371# –NOKIA Display IMEI : *#06# - *3001#12345# Software Version : *#0000# Sim Clock Stopping : *#746025625# Display Info : *#92702689# Activates Enhanced Full Rate : *3370# Deactives : #3370# Activates Enhanced HalfRate : *4370# Deactives : #4370# Bluetooth information : *#2820# Enables GPRS pccch : *#7220# Deletes Wallet (6310 test) : *#3925538# Clear Operator Logo : *#67705646# Software Reset : *#7370# –PHILIPS Display IMEI : *#06# Status Register : *#2254# Active/Deactive debug call : *#2255# Time and Days : *#2558# Active/Deactive Sleep Mode : *#7693# Security Code : *#7489*# Init, Flags, SIM CLK : *#3377*# Name, Length, SIM Phase : *#7378*# Philips Genie (TCD83 8 ) Active the beep signal and Reconnected to the net : *#2337*# –MITSUBISHI Display IMEI : *#06# Net Monitor 1 : hold*4329 Net Monitor 2 : hold*621342 M4 Test Mode : hold*5472 SW Version : hold*5806 HW Version : hold*5807 SW and HW Version : hold*936505 NS lock menu : hold*476989/*574243 CP lock menu : hold*482896 SP

lock menu : hold*967678 IMSI lock menu : hold*362628 Lock net level : hold*787090/*787292 Shot down : hold*3926 –LG IMEI (all) : *#06# IMEI and SW (LG 510) : *#07# SW Version (LG B1200) : *8375# Recount checksum : *6861# Factory Test : #PWR 668 Unknown (LG500) : 8060#*/9270#*/9278#* Unknown (LG200) :*789# + send Sim lock menu (LG B1200) : 1945#*5101# Sim lock menu (LG 510W/ 5200) : 2945#*5101# Untuk LG 7020/7010 : 2945#*70001# Untuk LG 500/600 : 2947#* –MOTOROLA Display IMEI : *#06# SW and HW Version : *#300# + ok Keypad test : *#301# + ok Set English Language : *#303# + ok Set Off engenering mode : *304# + ok Set On : #304*19980722# Location 1 : *#305# + ok Engenering tes mode : *#307# + ok Change phone code default : *#311# + ok ADC call val : *#400# + ok Contrast : *#402# + ok Phone Code Default : 1234 + ok Setting and Restore : *#0000# + ok Master unlock code : 19980722 + ok –ALCATEL Display IMEI : *#06# Meni 1 with SIM : 000000* Reset full : ###847# Add Barring Groups : ###765*02# Locking to Network : ###765*05# Unlocking from network : ###765*07# Deactive Barring Groups : ###765*78# –SAGEM Display IMEI : *#06# In Menu : *HOT MENU and Type Menu: -5-1-1-# + menu

CODE RAHASIA HANDPHONE GSM & CDMAJune 27, 2007 — Teknik Jumper

IMEI number: * # 0 6 #Software version: * # 9 9 9 9 # or * # 0 8 3 7 #Net Monitor: * # 0 3 2 4 #Memory reset (removes SIMLOCK!!!): *2767*3855# (works only on older versions)Memory reset CUSTOM: *2767*2878# (works only on older versions)Change dispplay contrast: * # 0 5 2 3 #Memory info: * # 0 3 7 7 # or * # 0 2 4 6 #Battery status: * # 9 9 9 8 * 2 2 8 #Change sound of alarm: *#9998*289#Vibra test: *#9998*842#More…..

Other CDMA CODE ProgrammingJune 9, 2008 — Teknik Jumper

Fly Bird Service Codes

Fly Bird S288, S688#*301#02# send - with SIM menu: 7 - 10 - ok,#*8000#, #*3676# (reboot repair)

V09, S1180*, 3 times down, 3 times up - Service Menu

Mitsubishi Codes

hold * 476989 NS Lock Menuhold * 482896 CP Lock Menuhold * 574243 NS Lock Menu

hold * 967678 SP Lock Menuhold * 362628 IMSI Lock Menuhold * 787090 Lock net.levelhold * 787292 Lock net.levelhold * 3926 Shut Down…

*#0048# fast change polish langpack*0000# automatic language

*850696 Warmstart

Eclipse:

hold * 65512890 eeprom reset - cure for hangs ect.

Nec Service Codes

*#06# IMEI*73738# (send?) Reset to defaults*#2820# Software version

SP Lock info:

*#3210# (send?) For Sim lock info*#8140# (send?) For Net lock info

[password is an 8 digits number]

Sim Lock *#4960# (send?) - Inquiry * 4969 * password * password # (send?)

Net Lock *#7320# (send?) - Inquiry * 7320 * password * password # (send?)

Net Lock 2 *#2220# (send?) - Inquiry * 2220 * password * password # (send?)

Subnet Lock *#1110# (send?) - Inquiry * 1110 * password * password # (send?)

VK Mobile Service Codes

*#06# IMEI checking code*#79# S/W Version checking code0124 Master Code*#85*364# (*) Engineering mode Access code (Press last button for 3 secs)85558555#(*)-hold

VG107855855# without SIM

VG2074268#(*)-hold

Trium Service Codes

*#06# IMEIhold * 4329 Net Monitor1hold * 621342 Net Monitor2hold * 5472 M4 Testmodehold * 5806 SW versionhold * 5807 HW versionhold * 936505 SW and HW versionhold * 476989 NS Lock Menuhold * 482896 CP Lock Menuhold * 574243 NS Lock Menuhold * 967678 SP Lock Menuhold * 362628 IMSI Lock Menuhold * 787090 Lock net.levelhold * 787292 Lock net.levelhold * 3926 Shut Down…*#0048# Fast change polish langpack*0000# Automatic language*850696 Warmstart

Eclipse:hold * 65512890 eeprom reset - cure for hangs ect.

Dancall Service Codes

*#06# IMEI*#9999# Firmware*#9998# Configuration*#9997# Selftest*#9994# Serial number (DANCALL HP 2731)*#9993# Adding “Engineering functions”*#9990# Battery monitor*#9000# SIM Lock*#9001# Group SIM Lock*#9002# Operator SIM Lock*#9003# Network SIM LockM1599955 Time to discharge

Switch

90E05 - Ericsson T2890E06 - Ericsson T2090E07 - Ericsson T20 / T28 / R320, Nokia 8210 / 621090E08 - Ericsson T28, Nokia 8210EF 9XG - Ericsson T280512(0518, 0519) - Ericsson T680518B - Siemens C35 / A35, Nokia 3310

0503 - Siemens C35, Ericsson T10 / A2618 / A1018, Nokia 33100506 - Nokia 33100507A - Nokia 3310, Ericsson A2618SP Z BB101 - Nokia 3510imld 2N2 (blue) - Working with Nokia 6210 / 8210 / 6310iKCD 282 - Nokia 6310XP215 - Siemens C45DFY21R74 - Nokia 5110 / 6110N50 02A - Samsung T100L50 08C - Samsung R21090D - Samsung 21000501B - Alcatel BE40511A - Sony CD5

Maxon Service Codes

*#9922# - Menu, reset (without SIM)*#9900# - Software Version*#9901# - Software Version (PBatch)*#9911# - L1 Debug on/off*#9915# - Back to defauld*#9916# - Text (scroll up/down)*#9917# - Lock status*#9934# - Bd config*#9935# - FC init*#9936# - TOC init*#9937# - Discharging battery*#9940# - Pins*#9941# - Testsignal*#9953# - Phone off*#9957# - Select 2-3 Menu lines*#9958# - Watch stop*#9959# - Watch start*#9960# - Contrast set*#9962# - SMS Menu*#9988# - Tetris Play*#9999# - Oem IdWahana Ponsel (Wahana Dunia Telekomunikasi Indonesia)Website Tempat Belajar Perbaikan PonselBaik Hardware maupun Software Secara Gratiswww.wahanaponsel.com .:. www.wahanaponsel.netwww.rajaponsel.com .:. www.rajaponsel.net

Nokia CDMA UnlockJune 9, 2008 — Teknik Jumper

Nokia:5185/6185 programming: *3001#12345#Software version: *#837# or *#VER# or *#9999#Serial / ESN: *#92772689# or *#WARRANTY#Phone reset: *#75681# or *#75682#

Nokia 6185-5170:1. Press *#639#2. Enter OTKSL and press OK3. Enter the MIN and select OK4. Enter the SID and select OK5. Programming is complete

Nokia 3585:1. Enter ## followed by the OTKSL2. Number (MDN) is highlighted. Press the upper left-hand soft key to select3. Mobile Number will display. Enter the 10 digit MIN4. Press OK5. IMSI will appear. Press and hold the Clear key until the display is empty.6. Enter 31000 plus the MSID (15 digits total)7. Press the upper left hand soft key and select OK8. It will take you back to the SVC Programming.Press the upper right hand soft key to select EXIT9. Press END.

10. Phone will power cycle and programming is complete.

Kyocera GSM Unlock CodeJune 9, 2008 — Teknik Jumper

Kyosera:Kyocera 2345 11351. Press 111111 (#1 key 6 times)2. Option will be highlighted3. Press OK4. Scroll down to Programming5. The service programming dialog will appear Enter Security Code.6. Enter the 6 digit OTSKL (code will show as asterisks on screen)7. Service Options will appear8. Scroll down to the BASIC NAM1 Info9. Press OK10. Select the Phone Number by pressing the OK key11. Using the keypad enter the 10 digit MIN12. Press OK13. Press END to complete the programming

Kyocera 6035:1. Press 1 six times (111111) and select OPTIONS2. Select PROGRAMMING3. Open flip4. Tap the OTKSL on keypad on the screen. Tap OK5. Tap on the PHONE NUMBER field. Enter MIN.6. Leave A-KEY blank7. Enter HOME SID (4654)8. Tap SAVE & EXIT9. Tap YES10. Phone will be in OFF MODE Close flip.

Kyocera 3035:1. Press 111111 (the #1 key six times)2. Options will be highlighted3. Press in the navigation key(Navigation key is the button located between the TALK & END key)4. Scroll to PROGRAMMING using the Navigation key5. Select PROGRAMMING by pressing in the Navigation key6. Enter the six digit OTKSL and press in the navigation key7. SERVICE OPTIONS will appear8. Scroll down to the Basic NAM1 info9. Press in the navigation key10. Clear any numbers that may appear using the “clear” key(arrow key located directly below the navigation key)11. Select the PHONE NUMBER by pressing in the navigation key12. Enter the 10 digit MIN select OK by pressing in the navigation key13. Press END. Programming is complete.

Kyocera 2255:1. Press the 1 key six times (111111) “Option will be highlighted2. Press OK3. Scroll down to “Programming” and press “OK”4. Enter OTKSL and press the navigation key5. “Service Options” will appear scroll down to the “Basic NAM1 Info”6. Press OK7. Select Phone Number by pressing OK8. Enter MIN and press OK again9. Scroll to Home SID and press OK10. Enter SID (4654) and press OK

11. Press END. Programming is complete.

*#06#IMEI number (International Mobile Equipment Identity)

*#0000#

Firmware version and date, Phone Model and Operator Variant

*#92702689#Life timer (W A R 0 A N T Y) - The amount of time your phone has spent sending and receiving calls.

*#62209526#Wireless MAC Address (M A C _ W L A N)

*#2820#Bluetooth MAC address (B T A 0?)

*#7370#Format phone (R E S 0 ?)

*#7780#Factory Reset (R S T 0 ?)

Note:Format phone restores phone to as if it was out of the box. Retains firmware version and operator Variant changes but wipes all applications you have installed. Does not format the memory card so any apps on there may reinstall once powered back up again.

Another way to format some symbian phones: Power off phone. Press and hold Green, * and 3 and keep them held whilst powering on and for a few seconds after.

Factory Reset resets all settings to defaults but keeps any applications you have installed and photos etc. Both need the Security code, which, by default, is 12345.

N95 picture viewer:2 – Scroll up (when zoomed)4 – Scroll left (when zoomed)5 – Zoom in (12.5%/25%/50%)6 – Scroll right (when zoomed)8 – Scroll down (when zoomed)0 – Zoom out

Press and hold (in Standby):Right selection key: Voice commandsMultimedia Key: Now Playing1: Voicemail2-9: shortcuts to address book you need to set up first0: Web#: Switches between General and Silent modes - not supported by all Operator Variants (when composing messages will switch between character and number input when held down)

12# (etc) in standby will dial the number held in location 12 on your SIM address book.

NOKIA E70 Secret CodesJune 15, 2008 — Teknik Jumper

To check the IMEI(International Mobile Equipment identity)*#06#

To check the firmware version and date use*#0000#

To check the Bluetooth MAC use*#bta0#

To check the WLAN MAC address*#mac0wlan#

To clear the operator logo*#opr0logo#

To activate*#pca0#

to deactivate*#pcd0# the GPRS PCCCH support

To check the SIM clock status*#sim0clock#.

To check the software version*#170602112302#.

To check the Warranty codes*#war0anty#.

#pw+1234567890+n#Display the SIM lock status:

n = 1: provider lock.n = 2: network lock.n = 3: country lock.n = 4: SIM lock.

Getting your IMEI (International Mobile Equipment Identity):Number: *#06#

Access Software version:> * < < * < *

Reach last dialed numbers:0 then #

The Sony Ericsson Secret Menu screen:-> * <- <- * <- *

Change to Default Language (English):

Info about SIMLOCK:< * * <

Opening phone without a SIM card:**04*0000*0000*0000# followed by on ‘Wrong Pin’ number

*3370#Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370#Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )

*#4720#Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

*#4720#Deactivate Half Rate Codec.

*#0000#Displays your phones software version,1st Line : Software Version,2nd Line : Software Release Date,3rd Line : Compression Type. ( Favourite )

*#9999#Phones software version if *#0000# does not work.

*#06#For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )

#pw+1234567890+1#Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

#pw+1234567890+2#Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).

#pw+1234567890+3#Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)

#pw+1234567890+4#SIM Card Lock Status. (use the “*” button to obtain the “p,w”and “+” symbols).

*#147#(vodafone) this lets you know who called you last.

*#1471#Last call (Only vodofone).

*#21#Allows you to check the number that “All Calls” are diverted to

*#2640#Displays security code in use.

*#30#Lets you see the private number.

*#43#Allows you to check the “Call Waiting” status of your phone.

*#61#Allows you to check the number that “On No Reply” calls are diverted to.

*#62#Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.

*#67#Allows you to check the number that “On Busy Calls” are diverted to.

*#67705646#Removes operator logo on 3310 & 3330.*#73#Reset phone timers and game scores.

*#746025625#Displays the SIM Clock status, if your phone supports this power saving feature”SIM Clock Stop Allowed”, it means you will get the best standby time possible.

*#7760#Manufactures code.

*#7780#Restore factory settings.

*#8110#Software version for the nokia 8110.

*#92702689#Displays -1.Serial Number,2.Date Made,3.Purchase Date,4.Date of last repair (0000 for no repairs),5.Transfer User Data.To exit this mode you need to switch your phone off then on again. ( Favourite )

*#94870345123456789#Deactivate the PWM-Mem.

**21*number#Turn on “All Calls” diverting to the phone number entered.

**61*number#Turn on “No Reply” diverting to the phone number entered.

**67*number#Turn on “On Busy” diverting to the phone number entered.

12345This is the default security code. press and hold # Lets you switch between lines