the notch in the Black Button facing the LED Bulb.

11. Gently place the Battery/LED Bulb Assembly back into the Top Cover with the LED Bulb leads passing through the notch in the Top Cover.

12. Holding the Top Cover, place the Metal Ring in place with the LED Bulb protruding through the opening in the Metal Ring.

13. Replace Bottom Cover and align screw holes.

14. Using a small Phillips screwdriver, gently turn the three screws clockwise until tight.

First in Key Ring Products™

SWISS+TECH® and Utili•Key® are registered trademarks, Smart-Clip™ and First in Key Ring Products™ aretrademarks of Crestwood Partners, LLC. ©2006 Crestwood Partners, LLC

Limited LIFETIME WarrantyYour SWISS+TECH® brand tool is warranted for the life of the useragainst any defects in material or workmanship. All Docking Stationsare warranted for one year against any defect in material orworkmanship.Abuse, battery expiration and surface coatings, which are subjectto normal wear and environmental conditions, are excluded fromthe warranty.Simply return your SWISS+TECH® brand product postpaid andinsured to:

SWISS+TECH Products701 Beta Drive, Unit 5

Mayfield Village, Ohio 44143Made in China

Information call: 800.414.8799 or visit www.swisstechtools.com

First in Key Ring Products™

Visit Our Website at www.swisstechtools.com

9. Nail Clipper

4. Nail File

1. Scissors3. Knife

2. Micro Flashlight

8.MM Ruler,

Inches Ruler

6. Screwdriver

7. Cuticle Tool

5. Nail Cleaner

Patents pending

Smart-Clip™ 9-in-1 Smart-Clip™ UltraPERSONAL CARE KEY RING COMPANION PERSONAL CARE KEY RING COMPANION

To Turn Flashlight On:Slide Flashlight switch forwardtoward LED bulb to On Position

Battery Replacement Instructions:1.Slide LED Flashlight switch

to Off Position, towardNail Clipper

2.While pushing switch pastOff Position, pull out frontend of switch and removeswitch/battery holder fromthe Smart-Clip™.

3.Replace battery withCR1025 3V lithiumbattery or equivalent.

4.Reinstall switch/batterycover into Smart-Clip™. Nail

Clipper

Nail File

Scissors

Knife

Micro FlashlightNail Cleaner

Screwdriver

PolishedStainlessSteel Case

TO UNLOCK from Key Ring:SLIDE button forward to opennail clippers.

TO LOCK onto Key Ring:Close Smart Clip™ on key ring,SLIDE button back to lock.

SWISS+TECH® and Utili-Key ® are registered trademarks, Micro-Plus™, Micro-Tech™, and Screwz-All™ are trademarks of Crestwood Partners, LLC. ©2006 Crestwood Partners, LLC

1. Using a small Phillips screwdriver, remove the three screws on the Back Cover.

2. Place the loose screws in a safe place.3. Gently lift the Back Cover off to expose

the batteries and LED Bulb.4. Lift the Metal Ring off.5. Holding the Top Cover, gently push the

Black Button to lift the Battery/LED Bulb Assembly out of the Top Cover.

6. Remove the Black Button and the LED Bulb.

7. Lift the two batteries out of the clear plastic Battery Holder.

8. Replace with two new CR1616 or equivalent lithium button cell batteries. Stack the batteries on top of each other in the Battery Holder, positive (+) side up.

9. Position LED Bulb with the straight bulb lead underneath the bottom battery (negative), and the angled bulb lead on top of upper battery (positive).

10. Position Black Button under the bottom of the Battery/LED Bulb Assembly with 800-414-8799

Micro-Light UltraTo turn flashlight on/off: Squeeze, and hold button

Battery ReplacementInstructions

Limited LIFETIME WarrantyYour Swiss+Tech® brand tool is warranted for the life of the user against any defects in material or workmanship.Abuse, battery expiration and surface coatings, which are subject to normal wear and environmental conditions, are excluded from the warranty.Simply return your Swiss+Tech® brand product postpaid and insured to:

Swiss+Tech Products701 Beta Drive, Unit 5

Cleveland, Ohio 44143

Information call: 800.414.8799 or visit www.swisstechtools.com

Made in China #74020 Rev. A

Holding Screwz-All™for extra torque.

Micro-Light100,000+Power Light Hours

1. Place the Micro-Light on a solid, flat surface.

2.Using a #1 Phillipsdriver, turn the fourscrews on the cover counterclockwise to remove.

3.Place the loose screws in a safe place.

4.Gently pull the cover up to expose the batteries andLED bulb.

Micro•LightMicro•Pac™Screwz•All™ 4-in-1Many Finishes andMaterials are available.These instructionsapply to all.

Screwdriver

Screwdriver

Screwdriver

Screwdriver

BONUS!1/8" RuleMarkings

Unlocking Instructions:Squeeze wire key ring to separate endsand remove from Screw•All™ sockets.

For full instructions see individualUtili•Key® & Micro•Light panels.

CAUTION:Utili-Key® features a razorsharp knife blade designedfor all types of cutting.Care should be taken toensure that the cuttingedge is always positionedaway from the user.

The BrightLight Key RingCompanion

The perfectaccessory forall otherSWISS+TECH®

keyring products

•Squeeze ON/OFF•Continuous

ON/OFF•Holds two 3-volt

lithium batteries•Replaceable, bright

white 100,000+ hour LED bulb

1.Gently pull the batteries up and outof the Micro-Light base. The LED bulb will also come out.

2.Remove the two batteries.

3.Replace with new CR2016 batteries orequivilent 3-volt batteries. Stack the new batteries on topof each other positive (+) side up.

4.Place straight bulb lead underneath lower battery. Place angled lead on top of upper battery.

5.Put new batteries and bulb backinto case.

6.Replace cover and align screw holes.

7. Using a #1 Phillips driver, turn the four screws clockwise.Gently tighten.

How To Replace The Batteries and LED Bulb:

First in Key Ring Products™

Visit Our Website at www.swisstechtools.comPosition of toolsfor extra torque.

How To Remove The Cover:

To Open and Unlock:Position the Utili-Key®

away from you andcarefully open by pullingthe tips apart as shown.

3. Large Phillips 4. Large Flat

2. Small Phillips

1. Small Flat

UnlockingInstructions:Swing screwdrivertips toward you (notoutward) to position2, then pull pliers’handles outward toopen and unlock.

Screwdriver

Precision Pliers,Wire Cutter,

Wire Stripper,Sheet Shear Screwdriver Screwdriver

Micro•Plus™

Additional Features

First in Key Ring Products™

SWISS+TECH® and Utili•Key® are registered trademarks, Micro•Tech™, Micro•Plus™, Screwz•All™, Micro•Pac™,and First in Key Ring Products™ are trademarks of Crestwood Partners, LLC. ©2004 Crestwood Partners, LLC

Limited LIFETIME Warranty

Information call: 800.414.8799 or visit at www.swisstechtools.com

CAUTION:Utili-Key® features a razorsharp knife blade designedfor all types of cutting. Careshould be taken to ensurethat the cutting edge isalways positioned awayfrom the user.

6. StraightKnifeBlade

5. Serrated Knife Blade

1. MicroEyeglassScrewdriver

3. Bottle Opener

To Openand Unlock:Position theUtili-Key® awayfrom you andcarefully open bypulling the tipsapart as shown.

Open position forSerrated & Straight

Knife Blades

Open position for

Micro EyeglassScrewdriver,

Bottle Opener,

Screwdriver

Locked positionon Key Ring

Utili•Key® 6-in-1 Micro•Tech™ 6-in-1 Micro•Plus™ 8-in-1

Positions for tool use:

1. Precision Pliers

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

BONUS!1/8" RuleMarkings

Screwdriver

1. PrecisionPliers

ScrewdriverScrewdriver

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

Screwdriver

2.1.

Positions for tool use:

Many Finishes andMaterials are available.

These instructionsapply to all.

Large PhillipsScrewdriver

Large Flat Small PhillipsSmall Flat

2. Flat

4. Phillips Screwdriver

Screwdriver

Flat Screwdriver,

Phillips

5. #1 Phillips

7. #1 Flat 8. #2 Flat

9.

6. #2 Phillips

5. #2 Flat 6. #2 Phillips

1/8" Rule Markings

UnlockingInstructions:Swing screwdrivertips toward you (notoutward) to position2, then pull pliers’handles outward toopen and unlock.

Screwdriver

Precision Pliers,Wire Cutter,

Wire Stripper,Sheet Shear Screwdriver Screwdriver

Micro•Plus™

Additional Features

First in Key Ring Products™

SWISS+TECH® and Utili•Key® are registered trademarks, Micro•Tech™, Micro•Plus™, Screwz•All™, Micro•Pac™,and First in Key Ring Products™ are trademarks of Crestwood Partners, LLC. ©2004 Crestwood Partners, LLC

Limited LIFETIME Warranty

Information call: 800.414.8799 or visit at www.swisstechtools.com

CAUTION:Utili-Key® features a razorsharp knife blade designedfor all types of cutting. Careshould be taken to ensurethat the cutting edge isalways positioned awayfrom the user.

6. StraightKnifeBlade

5. Serrated Knife Blade

1. MicroEyeglassScrewdriver

3. Bottle Opener

To Openand Unlock:Position theUtili-Key® awayfrom you andcarefully open bypulling the tipsapart as shown.

Open position forSerrated & Straight

Knife Blades

Open position for

Micro EyeglassScrewdriver,

Bottle Opener,

Screwdriver

Locked positionon Key Ring

Utili•Key® 6-in-1 Micro•Tech™ 6-in-1 Micro•Plus™ 8-in-1

Positions for tool use:

1. Precision Pliers

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

BONUS!1/8" RuleMarkings

Screwdriver

1. PrecisionPliers

ScrewdriverScrewdriver

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

Screwdriver

2.1.

Positions for tool use:

Many Finishes andMaterials are available.

These instructionsapply to all.

Large PhillipsScrewdriver

Large Flat Small PhillipsSmall Flat

2. Flat

4. Phillips Screwdriver

Screwdriver

Flat Screwdriver,

Phillips

5. #1 Phillips

7. #1 Flat 8. #2 Flat

9.

6. #2 Phillips

5. #2 Flat 6. #2 Phillips

1/8" Rule Markings

Micro•Plus™

Additional FeaturesUnlockingInstructions:Swing screwdrivertips toward you (notoutward) to position2, then pull pliers’handles outward toopen and unlock.

Screwdriver

Precision Pliers,Wire Cutter,

Wire Stripper,Sheet Shear Screwdriver Screwdriver

Micro•Plus™

Additional Features

First in Key Ring Products™

SWISS+TECH® and Utili•Key® are registered trademarks, Micro•Tech™, Micro•Plus™, Screwz•All™, Micro•Pac™,and First in Key Ring Products™ are trademarks of Crestwood Partners, LLC. ©2004 Crestwood Partners, LLC

Limited LIFETIME Warranty

Information call: 800.414.8799 or visit at www.swisstechtools.com

CAUTION:Utili-Key® features a razorsharp knife blade designedfor all types of cutting. Careshould be taken to ensurethat the cutting edge isalways positioned awayfrom the user.

6. StraightKnifeBlade

5. Serrated Knife Blade

1. MicroEyeglassScrewdriver

3. Bottle Opener

To Openand Unlock:Position theUtili-Key® awayfrom you andcarefully open bypulling the tipsapart as shown.

Open position forSerrated & Straight

Knife Blades

Open position for

Micro EyeglassScrewdriver,

Bottle Opener,

Screwdriver

Locked positionon Key Ring

Utili•Key® 6-in-1 Micro•Tech™ 6-in-1 Micro•Plus™ 8-in-1

Positions for tool use:

1. Precision Pliers

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

BONUS!1/8" RuleMarkings

Screwdriver

1. PrecisionPliers

ScrewdriverScrewdriver

Screwdriver

4. Sheet Shear

2. Wire Cutter3. Wire Stripper

Screwdriver

2.1.

Positions for tool use:

Many Finishes andMaterials are available.

These instructionsapply to all.

Large PhillipsScrewdriver

Large Flat Small PhillipsSmall Flat

2. Flat

4. Phillips Screwdriver

Screwdriver

Flat Screwdriver,

Phillips

5. #1 Phillips

7. #1 Flat 8. #2 Flat

9.

6. #2 Phillips

5. #2 Flat 6. #2 Phillips

1/8" Rule Markings

Micro-Plus™ SeriesMicro-Tech™ 6-in-1Utili-Key® 6-in-1

CAUTION:Utili-Key® features a razor sharp knife blade designed for all types of cutting. Care should be taken to ensure that the cutting edge is always positioned away from the user.

Open position for Flat Screwdriver, Micro Eyeglass, Screwdriver,

Bottle Opener,Phillips Screwdriver

Positions for tool use:

Open position for Serrated & Straight Knife Blades

To Open and

Unlock:Position the Utili-Key® away from you and carefully open by pulling the tips apart as shown.

Locked Positionon Key Ring

Screwz-All™ 4-in-1

Unlocking Instructions:Squeeze wire key clip to seperate endsand remove from Screw•All™ sockets.

1. #1 Flat Screwdriver

2. #1 Phillips Screwdriver

3. #2 Phillips Screwdriver

4. #2 Flat Screwdriver

BONUS!1/8" RuleMarkings

6. Straight Knife Blade

4. Phillips Screwdriver

3. Bottle Opener

1. Micro Eyeglass Screwdriver

5. Serrated Knife Blade

2. Flat Screwdriver