Upload
others
View
26
Download
0
Embed Size (px)
Citation preview
MKP-054
Battery Operated Hand-Held
Marking machine
(USER MANUAL)
JEIL MTECH Co.,Ltd.
#909 SKn technopark Mega-dong, Sagimakgol-ro 124, Joongwon-Gu, Sungnam-si,
Gyeonggi-Do, Korea. TEL) +82-31-776-0803 FAX) +82-31-776-0807
WWW.PINMARKING.COM
Jeil M tech CO., Ltd. 2016. (page 2 of 58) JIQP-16-11-09
MKP-054 & Accessories
MKP-054 with Accessories
MKP-054 Battery operated hand-held marking machine
86Mini_keyboard Software CD JL-1000
Bluetooth USB Dongle 18V 2.0Ah LI-ION Battery AL-1860CV Recharger
Jeil M tech CO., Ltd. 2016. (page 3 of 58) JIQP-16-11-09
General Information
Thank you for purchasing Jeil M-Tech’s
CNC DOT PIN Marking Machine.
To maximize the efficiency for operating the CNC DOT PIN marking machine,
read the details in this manual. If there are any problems not mentioned in this
manual, please inquire us and we will answer you as soon as possible. Also, if
there are any suggestions regarding inconveniences or improvements, please
inform us. The products are constantly upgraded and we assure you that it will
help the equipment maintenance.
TEL +82-31-776-0803~6
FAX +82-31-776-0807
[email protected] (English)
[email protected] (Japanese)
[email protected] (Technical supporting)
Web-page www.pinmarking.com/eng
“Marksman”is Jeil M-Tech`s Trade name.
The marking pin has a low sound level of less than “60db” has acquired
the patent and registration, and has been produced since Jan, 2000
Marksman is manufactured and confirmed by European standard CE
certification for security, endurance and electromagnetic wave stand, etc.
Warranty Information
The warranty period is 1 year since the delivery date.
(Traveling expensive will be billed to the customer after one year.)
All components are applicable for warranty, with the exception of intentional
Or accidental defects.
Jeil M tech CO., Ltd. 2016. (page 4 of 58) JIQP-16-11-09
When the problem is occurred during delivery and installation by the dealer,
Return the products to the dealer and be checked immediately.
Any problems resulting from intentional or accidental mistakes are not
applicable for warranty.
Table of Contents
MKP-054 & Accessories-----------------------------------2
General Information--------------------------------------3
Warranty information-------------------------------------3
Table of contents----------------------------------------4
1. Installation for MKP-054
1.1 Installation ------------------------------------------5
2. MKP-054 FUNCTION
2.1 FUNCTION key-----------------------------------------6
2.2 F2:MARK mode-----------------------------------------7
2.3 Basic setup for marking ----------------------------------8
2.4 F3:EDIT mode-----------------------------------------9
2.5 DATA CODE------------------------------------------12
2.6 Download program and Data setting------------------------15
2.7 F4:SETUP mode---------------------------------------13
2.8 F5:CODE --------------------------------------------14
2.9 F6:COMM mode---------------------------------------16
2.10 F7:TEST---------------------------------------------17
3. Installation of Bluetooth Dongle and precaution-------------------18
4 . Control MKP-054 through JS-2100 S/W-------------------------19
4.1 Menu ------------------------------------------------21
4.2 Tool -------------------------------------------------32
4.3 How to mark the data------------------------------------34
How to set marking Contents -----------------------------------37
Text Marking -----------------------------------------------37
2D data matrix marking ---------------------------------------38
Jeil M tech CO., Ltd. 2016. (page 5 of 58) JIQP-16-11-09
Figure marking ( Logo marking) ---------------------------------41
How to import excel file on JS-2100 -----------------------------42
(installation)
Installation of MKP-054
Main power : 18V , 2.0Ah Li-ion battery (Bosch)
Installation of Marking head
Installation should take place so that the distance between pin and workpiece should be 3.5-
4.5mm with a deviation of ±10mm.
Valid marking distance : 3.0~5.0mm
Refer to below drawing before install the marking head to the production line.
X축
Y축
0점
ABCDEF
Marking Area
3~5mm 유지
소재
(Reference 1) (Reference 2)
#.Can reduce cycle time of the marking when marking location
is close to 0 (Zero point)
Noise level
In general, noise level increased when workpiece is thin and there is a gap
between clamp and workpiece.
Soundproof cover attached (Closed space): 55db, with silencer : under 50db
Noise level of heavy duty in open space : 72db, with silencer : 56db
Noise level of plate of which weight is less than 2T ton : 87db, With silencer : 68db
Jeil M tech CO., Ltd. 2016. (page 6 of 58) JIQP-16-11-09
Adjustment marking quality : Marking quality can be adjusted the distance between work
piece and tip of marking pin.
Marking speed can be adjusted on F4 mode in MCU.
FUNCTION keys
Can change the mode from F2 to F7 in MCU-300BN on keyboard.
Modification of each mode setup value can be done through arrow key(,,,),
space bar and Enter.
F2: MARK (Marking mode)
Check the status of marking and MCU has to be in this mode during marking.
(Refer to PAGE.7)
F3:EDIT (Edit mode)
Edit the marking contents such as font, size, letter space, LOT number
and so on. (Refer to PAGE.9)
F4:SETUP (Parameter adjustment mode)
Control the speed of marking pin and motor. (Refer to PAGE.13 )
F5-1: Team code ( Press F5 to activate) .
Shift code input (Refer to pg. 14)
F5-2 : Date Code (Press F5 twice to activate)
Year, Month, Data text code input (Refer to pg. 15)
F5-3 : Lot No. Code ( Press F5 3times to activate)
Lot no. text marking input. (Refer to pg. 16)
F6:COMM (Serial communication mode)
The mode which can be communicated with JS-2100 software.
Be able to insert PLT, FONT and Excel file to MCU-300BN through JS-2100. (Refer to
PAGE.17 )
F7:TEST (Test mode)
The mode that can check the status of marking machine.. (Refer to page.18)
Jeil M tech CO., Ltd. 2016. (page 7 of 58) JIQP-16-11-09
F2: MARK (Mark mode)
F2: MARK MODE
<< MARK >>
B L K [00] UN# [ 00000000 ]
1 2 3 4
Status [ 16 : 05 : 28 ]
The F2 screen is the starting screen which receives the marking signals
and operates marking processes
All marking operations are only carried out in this screen.
1. Below screen will be indicated if press direction key on the keyboard. [↓].
-UN # [ 00000000 ] : Indicate the UNIT NUMBER
(Change using the key, choose from 0~999999)
-UP2 [ 00000000 ] : Specified marking quantity. Marking machine will be stopped
Automatically if marking quantity is reached to this number.
Default value of it is UN# [00000000].
EX) In case UN#[000010] and UP2[000020] “UNIT END” will be indicated to the STATUS
window after 10times marking. Additional marking job can not be activated.
-BEG BLK [00], END BLK [99] :
Jeil M tech CO., Ltd. 2016. (page 8 of 58) JIQP-16-11-09
Set the starting and ending point of the marking block. Select from block 0~99.
*Simulation(S) : Simulation function which can check the location of marking data.
It will be activated if press “S” button on keyboard.
*Return to home (F11) : To return to home position, press F11 on the keyboard.
Basic marking setup
Power ON
Select Marking TYPE
LIN(Linear marking) CIR(Circular marking)
Select Font In case CIR Mode
Radius[015.0]
Height[03.0]Cha. Size Input Angle[000]of marking
Pitch[03.0] Gab between each cha.
X,Y-offs[020.0] axis
Radius[000.0]
Angle[000]Marking degree
LOT#[0000004] First serial number
Jeil M tech CO., Ltd. 2016. (page 9 of 58) JIQP-16-11-09
Incr[+1]Serial no. fluctuation
Pause[N]Stop after marking
Block Data[16] Marking data
Switch to F2 mark mode
Start
F3:EDIT
<< EDIT >>
B L K [ 00 ] Type [ L I N ]
1 2 3 4
Status [ 16 : 05 : 28 ]
# Please Use the arrow key, Enter & space bar on the EDIT mode.
1. Below menu can be changed through arrow key (,) on the keyboard.
- Blk [00] : Can input up to 0~99 blocks, use PGUP,PGDN key.
- Type [LIN] : LIN(Linear), CIR(Circular-Clockwise),
CCW(Circular-Counterclockwise), PLT(PLT file), 2DM(2D MATRIX)
EMT(Empty block)
- Font[Std1] : Change the font by space bar to Std1, Std2, Dot, Usr
- Height [05.0] : Input the font size (based on height) 0MM~99.9MM
- PitchX[05.0] : : Input the distance between letters (0mm~99.9MM)
- X-Offs[010.0] : Input the starting point of X axis direction of the
marking direction from the origin (0~099.9MM)
The input value has to be following the marking window of each marking head.
- Y-Offs[010.0] : Input the starting point of Y axis direction of the
marking direction from the origin (0~099.9MM)
The input value has to be following the marking window of each marking head.
- Radius[015.0] : Input the radius of the circular marking.
Can enter 0MM~099.9MM.
Jeil M tech CO., Ltd. 2016. (page 10 of 58) JIQP-16-11-09
However, it has to be at least 1/2 of the marking range in order to mark.
- Angle[090] : In case of linear marking, it rotates the marking letters by 0~3600.
- Lot#[0000001] : Used for automatic serial number marking. 0~999999
- Incr[+1] : Used for serial number marking. Can give a fluctuation of 0~9.-1~-9.
Press –(Minus) and Shift + on the keyboard to decrease and increase
the number. .
*Auto serial setting command word is @LLLLL@(In case of 5 digits).
- Pause[N]: When entering more than one clock, it temporarily pauses. If you press Y,
it is SET and if you press N, it is ignored. When you want to reset,
enter STOP and RESET.
- Block Data : The LCD have a total of 40 partitions for letters/numbers/symbols, but
is limited to 20 partitions. However, it is possible to improve the scroll function,
and input and mark up to 40 letters.
-Status[ 12 : 30 : 55 ]: Marking status
★Caution★ Must press “Enter” key after input and edit the data.
030401
234567
HD4
X1:100mm
X2:120mm
X3:140mm
Y1:50mm
Y2:75mm
Y3:100mm
X-AXIS
Y-AXIS
5mm(Size)
ZERO POINT
4.8mm(Pitch)
Enter the X,Y distance at the F3:EDIT mode as the image above. Move 100mm to the X axis,
and 50mm to the Y axis from the origin, and move the marking pin to HD4. The starting point is
the lower center of the letter. The other locations can be coded using the same method. If HD4
Jeil M tech CO., Ltd. 2016. (page 11 of 58) JIQP-16-11-09
is on block [000], 030401 is on block [001], 234567 is on block [002]on the coordinate.
* Input the marking data as following if you want to mark same as above.
- BLK [00]Type [LIN] / FONT [Std1] / HEIGHT [05.0] / PITCHX [ 04.8] /
X-OFFS [10.0] / Y-OFFS [05.0] / RADIUS [000] /
ANGLE [000] / LOT#[000000] / Incr [00] / PAUSE [N] / DATA [HD4]
- BLK [01]Type [LIN] / FONT [Std1] / HEIGHT [05.0] / PITCHX [ 04.8] /
X-OFFS [12.0] / Y-OFFS [07.5] / RADIUS [000] /
ANGLE [000] / LOT#[000000] / Incr [00] / PAUSE [N] / DATA [030401]
- BLK [02]Type [LIN] / FONT [Std1] / HEIGHT [05.0] / PITCHX [ 04.8] /
X-OFFS [14.0] / Y-OFFS [10.0] / RADIUS [000] /
ANGLE [000] / LOT#[000000] / Incr [00] / PAUSE [N] / DATA [234567]
A : Set the marking direction.
Zero Point
*Marking direction can be set in
A:0 1 interval.
A:90 A:270
A:180
Jeil M tech CO., Ltd. 2016. (page 12 of 58) JIQP-16-11-09
A : Setting the direction for circular arc marking ( CIR, CCW ) C
Y:7
0m
m
CX:75mm
Y-AXIS
ZERO POINT
R:50m
m
12301 3
X-AXIS
기준점
W-
W+
Above Marking data is X-Offs[075.0] Y-Offs[070.0] Angle[330] Radius[050.0]다.
W+ is CIR, will be marked to the right side and W- is CCW, will be marked to the
left side.
DATA CODE
All system keys start and end with @ to be considered as a command word.
* Directions: Use only capital letters for input detail.
Example Input Output(Marking contents)
Automatic serial number @LLLL@ 1000
Jeil M tech CO., Ltd. 2016. (page 13 of 58) JIQP-16-11-09
marking
Automatic year/month/date
marking
@YYMMDD@ 161026
Marking the time with numbers @HHBBSS@ 123055
Julian calendar(1~365days) @JJJ@ 300
Calendar code marking
Z:Year N:Month E:Day
@ZNE@ AAB
Worker Shift @O@ Any cha. by the time of
worker shift
Auto serial numbering using all
letter and numbering
@AAA@ AAB
F4:SETUP
<< SETUP >>
1. Resolution [ 06400 ] Initial value (Prohibit modification)
Jeil M tech CO., Ltd. 2016. (page 14 of 58) JIQP-16-11-09
2. Markng Speed [ 150 ] The speed pin comes out
Status [ 12:30:55 ] during the marking
<< SETUP >>
3. MaximumSpeed [ 400 ] The speed pin don`t comes
4.Accel Rate [ 100 ] out during the marking.
Status [ 12:30:55 ] Ratio for accelerate & decelerate
<< SETUP >>
5. Mot.HoldCurr [ 040 ] Initial value
6. Mot.MoveCurr [ 100 ] (Prohibit modification)
Status [ 12:30:55 ]
<< SETUP >>
7. Sol ON Delay [ 15 ] ON TIME of Sol. Valve for each cha.
8. Sol OFF Delay [ 15 ] OFF time of Sol.valve for each cha.
Status [ 12:30:55 ]
<< SETUP >>
Jeil M tech CO., Ltd. 2016. (page 15 of 58) JIQP-16-11-09
9. DOT ON Delay [ 30 ] Initial value
10. Sol OFF Adv [ 60 ] (Prohibit modification)
Status [ 12:30:55 ]
<< SETUP >>
11. Peen Type [ PH] Select Pin type
12. Sol.MaxCurr [500 ] Initial value (Prohibit modification)
13. End delay [1500] Initial value (Prohibit modification)
Status [ 12:30:55 ]
* Above setting is factory initial setting value.
F5: Code
F5-1) TEAM CODES ( Press F5 to activate)
1 2
<<TEAM CODE>>
1. [A] – [00 : 00 : 00]
2. [B] – [08 : 00 : 00]
3. [C] – [16 : 00 : 00]
① Possible to change Shift code upto 12.
-> In case add the shift code, press “Enter” on the keyboard to move
the cursor to ① and then set shift code what you want.
② will be changed to [ 00 : 00 : 00 ] then you can change the time.
Jeil M tech CO., Ltd. 2016. (page 16 of 58) JIQP-16-11-09
② Possible to set the time of shift code.
-> [ 00 : 00 : 00 ] Can imput the time of worker
F5-2) Date code marking : Press F5 2 times to activate
<< DATE CODES >> << DATE CODES >>
Y0[A] Y1[B] Y2[C] Y3[D] JAN [1] FEB [2] MAR [3]
Y4[E] Y5[F] Y6[G] Y7[H] APR [4] MAY [5] JUN [6]
Y8[I] Y9[J] JUL [7] AUG [8] SEP [9]
① ②
<< DATE CODES >> << DATE CODES >>
OCT [X] NOV [Y] DEC [Z] 9 [I] 10 [J] 11 [K] 12 [L]
1 [A] 2 [B] 3 [C] 4 [D] 13 [M] 14 [N] 15 [O] 16 [P]
5 [E] 6 [F] 7 [G] 8 [H] 17 [Q] 18 [R] 19 [S] 20 [T]
③ ④
<< DATE CODES >>
21 [U] 22 [V] 23 [W] 24 [X]
25 [Y] 26 [Z] 27 [Q] 28 [W]
29 [3] 30 [4] 31 [5]
⑤
Press Enter on the keyboard to move the cursor and page movement
Variable command for date code : @ZNE@
Z : Year code N : Month Code E: Date code
(1) YEAR CODE : Among variable command using “Z”, set the date same as
Jeil M tech CO., Ltd. 2016. (page 17 of 58) JIQP-16-11-09
above.
-> Y0[A] : 2010, Y1[B] : 2011, Y2[C] : 2012, Y3[D] : 2013, Y4[E] : 2014,
Y5[F] : 2015, Y6[G] : 2016, Y7[H] : 2017, Y8[I] : 2018, Y9[J] : 2019
Set the code to the last no. of digit after 2020.
(2020->Y0, 2021 ->Y1, 2022->Y2, 2023 ->Y3, 2024->Y4 ……)
(2) MONTH CODE : Among variable command using “N”, set the date same as
above..
-> JAN : 1 / FEB : 2 / MAR : 3 / APR : 4 / MAY : 5 / JUNE : 6
JUL : 7 / AUG : 8 / SEP : 9 / OCT : 10 / NOV : 11 / DEC : 12
(3) DATE CODE : Among variable command using “E”, set the date same as above..
EX) In case input @ZNE@ same as above, marking will be GXZ when it is Oct.
26th 2016.
F5-3) LOT NO. CODE ( Press F5 3times to activate)
<< LOT NO CODES >> << LOT NO CODES >>
A[A] B[B] C[C] D[D] E[E] P[P] Q[Q] R[R] S[S] T[T]
F[F] G[G] H[H] I [ I ] J[J] U[U] V[V] W[W] X[X] Y[Y]
K[K] L[L] M[M] N[N] O[O] Z[Z] Total Code [26]
① ②
Press Enter on the keyboard to move the cursor and page movement.
The function of auto serial numbering using all cha. and number.
In case @AAA@
Ex : In case Decimal number, you may use A to I. If you want to mark 005, it will be
indicated AAF.
Please move cursor to [I] and then press Space bar on the keyboard.
All last lot no. code will be disappeared.
In case Serial number what you want to mark is 123, it will be indicated BCD
Jeil M tech CO., Ltd. 2016. (page 18 of 58) JIQP-16-11-09
F6:COMM (Communication mode)
Communication Mode
<< COMM >>
Scale [000]
2016 / 10 / 26 Wed
Status [ 12 : 30 : 55 ]
Possible to edit the data and import User Font, PLT & Excel file
through JS-2100 S/W.
Possible to give signal of Start, Reset and Stop without Switch box.
Each data can be stored and managed unlimited depending on the
hardware capacity
Refer to Pg.20 for further information of JS-2100 Software.
Jeil M tech CO., Ltd. 2016. (page 19 of 58) JIQP-16-11-09
F7:TEST
<< TEST >>
P1[000000] P2[000000]
2016/10/26 Wed
Status [ 12 : 30 : 55 ]
* F7: You can check the Motor and Sensor situation on TEST MODE.
And you can also modify the date and the time on this mode.
P1 “[000000]” P2 “[000000]”
[000000]: No Sensing at all [000000]: No signal
[010000]: X Limit Sensing. [000001]: PLC 0
[100000]: Y Limit Sensing. [000010]: PLC 1
[110000]: X,Y Limit Sensing at once [000100]: PLC 2
[001000]: PLC start [001000]: PLC 3
[000100]: STOP [010000]: PLC 4
[000010]: RESET [100000]: PLC 5
[000001]: START
How to set the time
Ex) 2 0 1 6 / 1 0 / 2 6 Wed
- Y y M m D d w (Case sensitivity)
Ex) 1 2 : 3 0 : 5 5
- H h B b S s (Case sensitivity)
Jeil M tech CO., Ltd. 2016. (page 20 of 58) JIQP-16-11-09
Checking the motor condition : You can check for problems of the marking pin by
pressing the direction keys on the keyboard at the F7 screen. The amount of marking pins
transferred depends on how many times the keyboard was pressed.
Therefore, it is important to check the sensor at the origin point, the motor, and the
stepping driver. You can trace the problems by checking the X and Y axis that doesn’t
follow the direction key’s signal.
Control MCU-300BN through JS-2100
Initial window display of JS-2100 program
*Above display is the initial screen when you operate JS-2100. Input data will
Jeil M tech CO., Ltd. 2016. (page 21 of 58) JIQP-16-11-09
be transferred to the controller and control X and Y axis motor.
* How to connect JS-2100 to MKP-054 using Bluetooth *
1. Turn MKP-054 ON and change the mode to F6 COMM
<< C O M M >>
Scale [000]
2017/11/23 Thu
Status [ 14:23:12 ]
2. Activate the function of Bluetooth on your lap-top
Jeil M tech CO., Ltd. 2016. (page 22 of 58) JIQP-16-11-09
3. Click “Add the Bluetooth and other device”
Jeil M tech CO., Ltd. 2016. (page 23 of 58) JIQP-16-11-09
4. Click “Bluetooth” to activate
5. Searching the device that can be connected by Bluetooth around your
lap-top.
Bluetooth name of MKP-054 will be shown same as below MK300~
Jeil M tech CO., Ltd. 2016. (page 24 of 58) JIQP-16-11-09
6. Click MK300A2E0776. Then you can enter the pin no. (Pin no. :
1234)
7. COM PORT between JS-2100 and Lap-top has to be same so that
MKP-054 is connected with JS-2100. (Possible to check the comport
on Device manager)
Jeil M tech CO., Ltd. 2016. (page 25 of 58) JIQP-16-11-09
8. Click “Setting” on JS-2100 and set COM Port on JS-2100 same with
Lap-top
9. Click “Save setting”
Jeil M tech CO., Ltd. 2016. (page 26 of 58) JIQP-16-11-09
10. Enter the data you want to mark. (Refer to pg. 19 on manual)
11. Click “Marking” on JS-2100. Pop-up window is opened
Jeil M tech CO., Ltd. 2016. (page 27 of 58) JIQP-16-11-09
12. “External Trigger“ on JS-2100 to give start signal by hand-grip
switch to mark the data on JS-2100.
13. END
** In case of desk-top , install USB dongle device to your desk-top.
And then See the following instruction above step No. 1~ 13 **
Jeil M tech CO., Ltd. 2016. (page 28 of 58) JIQP-16-11-09
1. Menu
1. File
(1) New Open new job
(2) Open Import the saved data
(3) Save Save the current job.
(4) Save as Save the current job to another file name.
(5) 1:, 2: Bring the recent job.
(6) Exit Close the File Menu.
Jeil M tech CO., Ltd. 2016. (page 29 of 58) JIQP-16-11-09
2. Edit
(1) Copy Copy the block you select.
Jeil M tech CO., Ltd. 2016. (page 30 of 58) JIQP-16-11-09
(2) Paste Paste the select block to another area
(3) Undo Reverse previous job.
(4) Redo Reinstate the previous job.
3. View
Jeil M tech CO., Ltd. 2016. (page 31 of 58) JIQP-16-11-09
(1) Zoom In Enlarge the screen.
(2) Zoom Out Reduce the screen.
(3)Show All Return to initial status to be seen
all marking area on window screen.
Jeil M tech CO., Ltd. 2016. (page 32 of 58) JIQP-16-11-09
4. Marking
Jeil M tech CO., Ltd. 2016. (page 33 of 58) JIQP-16-11-09
(1) Start Marking the data
(2) Reset In case of stop, return to home position.
(3) Stop Make it stop during the marking.
(4) External Triqqer In case using switch box.
(5) Mark Only Selected Mark select data only.
5. Settings
Jeil M tech CO., Ltd. 2016. (page 34 of 58) JIQP-16-11-09
(1) General – Setup the PC communication port that can be
connected with controller.
Jeil M tech CO., Ltd. 2016. (page 35 of 58) JIQP-16-11-09
(2) Pin Marking
- Table width : Determine X axis marking range
- Table height : Determine Y Axis marking range.
- Axis movement mode : Determine a movement during marking.
→ Simultaneous : Simulation mode.
→Move X before Y : X axis is moved earlier then move to Y axis.
Jeil M tech CO., Ltd. 2016. (page 36 of 58) JIQP-16-11-09
→Move Y before X : Y axis is moved earlier than move to X axis.
- Sol On Delay : Adjust the ON time of sol. Valve.
- Sol Off Delay : Adjust the OFF time of sol. valve.
- Sol Dot Delay : Initial value (Prohibit modification)
- Sol Adv Delay : Initial value (Prohibit modification)
Jeil M tech CO., Ltd. 2016. (page 37 of 58) JIQP-16-11-09
(3) Code Translation : when it marks auto Year/Month/Date/day/worker
as characters, can set those cha. as below.
Command word when it is indicated
by digit.
Command word when it is
indicated by text
Year @Y@ @Z@
Month @M@ @N@
Date @D@ @E@
Day @F@ @F@
Hour @H@ -
Minute @B@ -
Seconds @S@ -
Worker - @O@
Serial no. @LLLL@ -
@ In case it is in 12:30:55 Wednesday 26th Oct. 2016
Command @Y@ @YYYY@ @MM@ @DD@ @F@ @HHBBSS@
Data 6 2016 10 26 3 123055
@YYMMDDFHHBBSS@ 201610263123055
@ In case it is in 12:30:55 26th Oct 2016
Command @Z@ @N@ @E@ @O@
Data G J Z B
@ZNEO@ GJZB
- Other commands
Jeil M tech CO., Ltd. 2016. (page 38 of 58) JIQP-16-11-09
1) @LLL..@ : Auto serial numbering according to no. of “L”.
2) @R1@ : Team reset .
3) @R2@ : Reset on every O o`clock
4) @R3@ : Resent on Sunday 0 o`clock.
5) @R4@ : Reset on every 1st 0 o`clock.
6) @JJJ@: Julian calendar
Ex) In case it is Oct. 26th 2016, it will e 300th day of 2016.
300 will be marked if input @JJJ@
★ Check “V” to “Use Macros” in case using command word.
Jeil M tech CO., Ltd. 2016. (page 39 of 58) JIQP-16-11-09
(4) PLC : Menu which will be prepared
Jeil M tech CO., Ltd. 2016. (page 40 of 58) JIQP-16-11-09
6. Help
Jeil M tech CO., Ltd. 2016. (page 41 of 58) JIQP-16-11-09
- About JS-2100 : Confirm the version of JS-2100
Jeil M tech CO., Ltd. 2016. (page 42 of 58) JIQP-16-11-09
2. Tool
: Open new file.
: Import saved data.
: Save the data.
Jeil M tech CO., Ltd. 2016. (page 43 of 58) JIQP-16-11-09
: Save the data with another new name.
: Reverse previous step.
: Reinstate the previous data.
: Activate Marking Window
: Activate Settings Window
: Make the screen to initial size.
: Reduce the screen. (can not reduce it smaller than initial size)
: Enlarge the screen.
Jeil M tech CO., Ltd. 2016. (page 44 of 58) JIQP-16-11-09
- Snap : Adjust the interval of movement when marking data moves.
: If you click this icon when you want to have cha. Marking, “Label” is
created on the screen. Can change this letter to another letter you want.
: If click this icon, 2D Barcode is created on the screen. You can change
the created barcode to have correct barcode marking..
: Import .plt, .dwg, .dxf file.
: Create the square figure.
: Create the round figure.
Jeil M tech CO., Ltd. 2016. (page 45 of 58) JIQP-16-11-09
: Create the line figure
: Create the dot.
3. How to set-up marking contents
1. Elements window
Jeil M tech CO., Ltd. 2016. (page 46 of 58) JIQP-16-11-09
- Marking contents using tools will be indicated to the folder
“Elements” on the screen.
- The content on Elements are marked from top to bottom.
2. Text setting by Properties window
Jeil M tech CO., Ltd. 2016. (page 47 of 58) JIQP-16-11-09
(1) Mark : Select whether to mark or not.
(2) Name : File name on elements.
(3) Text : Input marking contents to the section of text.
(4) Use Macros : Use Macros which is promised in advance.
Ex) Auto serial no., Year, month, date, etc(Refer to pg. 28)
(5) Lot number : First auto serial no.
Jeil M tech CO., Ltd. 2016. (page 48 of 58) JIQP-16-11-09
(6) Lot increment : Determine increase and decrease of the serial no.
(7) Lot Data Filename : Import Excel file.
(8) Lot Data File Row : Designate the row to the Excel file.
(9) X : Indicate X axis coordinate.
(10) Y : Indicate Y axis coordinate.
(11) Rotation : Rotate the characters.
(12) Scale X : Designate the size of X axis characters.
(13) Scale Y : Designate the size of Y axis characters.
(14) : Moving toward left, center and right from .
(15) : Moving toward up, center and down from .
(16) Use Computer Font : Change the font that stored in the computer.
(17-1) Use Line Font : Outline marking.
(17-2) Standard Line Font : Single line marking.
(17-3) Narrow Line Font : Narrow line marking.
(17-4) Dot Font : Dot marking.
(18) Equal Spacing : Make the distance between each characters.
(19) Circular : Direction of circular marking to clockwise and
counterclockwise. Cir. Radius : Radius of circular marking.
Jeil M tech CO., Ltd. 2016. (page 49 of 58) JIQP-16-11-09
Jeil M tech CO., Ltd. 2016. (page 50 of 58) JIQP-16-11-09
3. 2D Barcode setting by Properties window
(1) Mark : Select whether to mark or not.
Jeil M tech CO., Ltd. 2016. (page 51 of 58) JIQP-16-11-09
(2) Name : File name on elements.
(3) Text : : Input marking contents to the section of text.
(4) Use Macros : Use Macros which is promised in advance.
Ex) Auto serial no., Year, month, date, etc(Refer to pg. 28)
(5) Lot number : First auto serial no..
(6) Lot increment : Determine increase and decrease of the serial no.
(7) Lot Data Filename : Import Excel file (Refer to P39)
(8) Lot Data File Row : Designate the row to the Excel file.
(9) X : Indicate X axis coordinate.
(10) Y : Indicate Y axis Coordinate.
(11) Rotation : Rotate the 2D data matrix.
(12) Scale X : Designate the size of X axis characters.
(13) Scale Y : Designate the size of Y axis characters.
(14) : Moving toward left, center and right from .
(15) : Moving toward up, center and down from
(16) Data Matrix Size : Designate the size of 2D data matrix.
(Caution) The size of 2D data matric will be changed automatically when
Jeil M tech CO., Ltd. 2016. (page 52 of 58) JIQP-16-11-09
you set it as Default. Contain data of 2D data matrix is more than the size
of designate 2D data matrix, it can not be marked.
In this case, above message pop up.
You can solve the problem if you click “Adjust Data Matrix Size to fit”,
it will be changed it to proper size 2D data matrix automatically.
Jeil M tech CO., Ltd. 2016. (page 53 of 58) JIQP-16-11-09
4. Figure setting by Properties window
Jeil M tech CO., Ltd. 2016. (page 54 of 58) JIQP-16-11-09
(1) Mark : Select whether to mark or not.
(2) Name : File name on elements.
(3) X : Indicate X axis coordinate.
(4) Y : Indicate Y axis coordinate.
(5) Rotation : Rotate the figures.
(6) Scale X : Designate the size of X axis characters.
(7) Scale Y : Designate the size of Y axis characters.
(8) : Moving toward left, center and right from ..
(9) : Moving toward up, center and down from .
4. How to import EXCEL file
Jeil M tech CO., Ltd. 2016. (page 55 of 58) JIQP-16-11-09
(1) Import Excel file when Click next to Lot Data Filename.
(2) Click the file you want to import and then click “Open”.
(3) In case it imports above Excel file information.
Jeil M tech CO., Ltd. 2016. (page 56 of 58) JIQP-16-11-09
(4) Input Select @1111 2222 33@ to the text window after select “V” to “Use
Macros”
(5) The data in Excel file will be indicated.
(6) @1111@ is the A row data of excel file
@2222@ is the B row data of excel file.
@33@ is the C row data of excel file.
Jeil M tech CO., Ltd. 2016. (page 57 of 58) JIQP-16-11-09
(7) ★Caution★ The no. of data of excel file will be marked as no. of @ digits
@.
(8) 2nd line data on excel file will be marked if you input the command word
like “@ ~ R@”.
Jeil M tech CO., Ltd. 2016. (page 58 of 58) JIQP-16-11-09
(Increase line no. is depending on no. of R.)
(9) In case to mark designate line, input the digit to “Lot Data File Row”.