1:2

➕

Demi Permanent - Tone On Tone Creator Always mix tint and tone on tone to reduce alkaline and then add the 5 vol. 10:1 for toning with good porosity - 1ml per 10ml 10:2 with porous whilst toning and natural hair applications 2ml per 10ml

White Hair coverageWith a percentage of white hair higher than 50%, mix the natural shade with a creative shade in equal parts. i.e. Natural base 5 with 50% of white hair. Target Base: 8.3 Levels of lift: 3 = 50g of 8 + 50g of 8.3 + 150g peroxide with 40 vol. (Hair with 50% or less white hair - no base colour necessary.) 100% white hair use 20 Vol.

1:1.5

➕

Mixing Ratios - Permanent colour

5 Vol

➕

Energy Series Mixing ratio 1: 2

Objective Yellow Peroxide Processing time

Coverage and deposit (same level or darker)

10 Vol. - 3% 25’ to 35’ minutes

Coverage and lift 1 level

20 Vol. - 6% 35’ to 40’ minutes

Coverage and lift 2 levels

30 Vol. - 9% 40’ to 45’ minutes

Coverage and lift 3 levels

40 Vol. - 12% 45’ to 50’ minutes

Lift 4 levels with Energy Series (no grey coverage)

40 Vol. -12% 45’ to 50’ minutes

To lift 4-5 levels with Energy Series+ 0SS (no grey coverage)

40 Vol. -12% 50’ to 55’ minutes

Peroxides and Timing Choosing the correct peroxide and following the timings is essential to ensure the best results. Yellow peroxides are designed to work in harmony with Yellow colour and a low alkalinity peroxide containing Argan oil and Aloetrix Peroxide is the fuel to your colour, if not weight to the correct mixing ratio or wrong volume of peroxide is chosen the desired result will not be achieved.

.1 Ash - Blue

.2 Violet - Violet

.3 Gold - Yellow

.4 Copper - Orange

.5 Mahogany - Red+Violet

.6 Red - Red

.7 Matt - Green

1 black2 brunette

3 dark brown4 medium

5 light brown6 dark blonde

7 medium 8 light blonde

9 lightest blonde10 extra light

½ 2 + ½ 4.654.654.65½ 5.66 + ½ 6.45¾ 6.66 + ¼ 7.4 ¾ 7.4 + ¼ 7.668.49.310

Shades to recover colour is always with warm shades (gold, intense gold, copper, red/copper or red) The shade you need to choose needs to be one or two levels lighter than the desired result.

Mixing ratio will be: 1:2 for sensitive hair 1.3 for very sensitive hair (bleached) Yellow peroxide 10 vol. Apply carefully the mixture only on the areas that need to go darker. Processing time 10-15 minutes. Rinse thoroughly and dry. Apply the desired colour mixture on roots, lengths and ends.

Shades to recover colour (pre-pig)

YELLOW Bleaching products YELLOW BLEACH – 7 LEVELS YELLOW BLEACH – 9 LEVELS

Type of product 7-level bleach powder 9-level bleach powder

Ideal for Classic highlights, on scalp bleaching, bleach shampoo

Bleaching very dark cosmetically colored or natural hair. Very fair lightening results. Application over cosmetic color during

processing time.

Bleaching techniques Highlights Freehand Cap Bleach

ShampooWhole head Highlights Freehand Cap

Mixing ratio 1:2from

1:1 to 1:1,5

1:2 1:3 + shampoo 1:2 1:2 1:1,5 1:2

Recommended Volume 20,30 10,20, 30,40

20,30,40 10 10,20,

30 20,30 30 20,30

Processing time 50 minutesfrom 5 to

20 minutes

Up to 50

min 50 minutes

Levels of lightening up to 7 up to 2 up to 7 up to 9

Silver pigments Mixing Ratio Hair Mask (10:1): 10 g of Yellow mask* + 1 g of Pigment (1 pump) Mixing Ratio Colour - 60 g of color + 8 g of Pigment (8 pumps) - 100 g of color + 12 g of Pigment (12 pumps) Mixing Ratio Liss Smoothing Treatment (10:1): 150 g of Smoothing Mousse + 15 g of Pigment (15 pumps)

Bond hero Bleaching, Colouring and Smoothing Mixing Ratio 1:6 E.g. : 10 ml Bond Hero + 60 ml Yellow Colour Mask Mixing Ratio 1:6 E.g. : 5 ml BOND HERO + 30 ml MASK Strengthens hair up to 86%

Colour removal Wash

• 25g - 7 levels yellow Bleach • 75ml 10 volume Yellow Peroxide • 10ml Yellow colour care shampoo • Leave for 5 -20minutes depending on

desired result.