1 Item Name: FOAM PROPORTIONING UNIT Company Project Number:

2 Item Tag Number: V-07130 Purchase Order Number:

3 No Items: 1 Supplier Project Number:

4 GENERAL

5 Information to be completed by: Purchaser Vender Vender if not completed by Purchaser

6 Applicable to: Proposal Purchase As Built

7 DESIGN CRITERIA

8 Service: Foam Proportioning Unit Material Code: ASME Section II

9 Design Code: ASME Section VIII - Division 1 Shell: A516-60

10 Vessel Size: ID. mm S/S mm Head: A516-60

11 Thickness: Shell: mm Head: mm Pipes: A106 Gr.B

12 Vessel Type: Vertical Horizontal Flange: A105

13 Heads: 2:1 Ellipse Other Type: Blots: A193

14 Medium: Hydrogen Lethal Cyclic Nuts: A194-2H

15 Severe Wet H2S Gaskets: Spirally Wound Non-asbestos Gaskets

16 Location: Indoor Outdoor Supports: A36

17 Under Shelter Internals: A36/A516/A106

18 PROCESS DATA

19 Total Flow: 64L/S (10 m3 ) Manufacturing Code: ASME Section VIII-Division 1

20 Operating Pressure: 1.0 MPag Welding Code: ASME Section IX

21 Operating Temperature: 40 oC NDE Code: ASME Section V

22 Vapor Density: kg/m3 Ultrasonic: As Per Code

23 Liquid Density: 1.02 kg/m3 Magnetic Paricle: As Per Code

24 Code: ASME Stamp Yes No X-Ray Inspection Length: As Per Code

25 Board Registration: Yes No X-Ray NDE Grade: As Per Code

26 Internal Design Pressure: 1.35 MPag Hydraulic Test: Yes No

27 Top, Mpa at oC Painting and Packing: Yes No

28 Bottom, Mpa at oC As Per Specification MIS-L-SP-03537

29 Design Temp:� 55 oC Corrosion Prevention: Yes No

30 Normal Liquid Level: mm Lifting Lug: Yes No

31 Max Wind Speed: 29.8 m/s

32 Seismic Zone: hold

33 Corrosion Allowance: Mist Eliminator: Yes No

34 Shell: 3 mm Heads: 3 mm Nozzles: 3 mm Type:35 Insulation: Yes No Vortex Breakers: Yes No

36 Type: Thickness: Coil: Yes No

37 Others:

38

39

PAGE 1 OF 2

Tao Lifeng

Approved

A

CLIENT: CNPCI/NESCO Consortium UNIT: PU & DP

MIS DEVELOPMENT PROJECTFOAM PROPORTIONING UNIT

DATA SHEET

DOCUMENT NO.: MIS-M-DS-04054

Rev. Date Description By

Fan Xixuan

Reviewed

Lu Huanxuan Zhai FengJune 18,05 Issued For Approval

REV. A

MATERIALS

MANUFACTURE AND TEST REQUIREMENTS

INTERNALS

Checked

1

2 Type of Support: Empty Weight: By Vendor kg

3 Skirt Legs Saddle Lugs Operating Weight: By Vendor kg

4 Insulation Supports: Yes No Weight Filled With Water: By Vendor kg

5 Fire Proofing Supports: Yes No Dimension:

6 Skid Mounted: Yes No L x W x H: mm

7 Manway Davit/Hinge: Yes No

8 Ladder: Yes No

9 Platform: Yes No

10

11 Service

12 Water Inlet

13 Gas Outlet

14 Outlet

15 Drain

16 Manway with Davit

17 Pressure Gauge

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35 NOTE:

36 1. All nozzle orientations to be defined later.

37 2. Reference PID: MIS-P-DW-01711. Applicable spec: MIS-M-SP-04004.

38 3. The foam concentrate shall be stored in a rubber vesicle to separate from pressure fresh water.

39 valves and instruments, etc.

40 4. The mixing ratio is 94:6 between fresh water and foam concentrate in the pressure proportion mixer.

41 5. The foam concentrate shall be stored in a rubber vesicle to separate from pressure fresh water.

42 6. The foam proportion unit is one septum positive pressure proportion mixing type.

43 7.The vessel size and all the internals should be checked by EPC contractor.

1

NPTF

1 24" RF

ANSI 150

ANSI 3000

ANSI 150

NOZZLES

ATTACHMENT WEIGHT AND DIMENSION

ANSI 150

Mark

N21-3

TypeSizeQty

3 1" RF

Rating

RF2" ANSI 150

ANSI 150

PAGE 2 OF 2CLIENT: CNPCI/NESCO Consortium DOCUMENT NO.: MIS-M-DS-04054

1/2"PG1-2 2

N3

MW

3 2" RFN41-3

REV. A

MIS DEVELOPMENT PROJECTFOAM PROPORTIONING UNIT

DATA SHEET

UNIT: PU & DP

N1 1 2" RF