Upload
jmac-supply
View
230
Download
0
Embed Size (px)
DESCRIPTION
Buy the Mircom MIR6B at JMAC Supply.https://www.jmac.com/Mircom_Technologies_MIR6B_p/mircom-mir6b.htm?=scribd
Citation preview
MAGNETIC DOOR LOCKS MIR6S / MIR6B
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
600 pounds minimum holding force
Compatible with all access/egress systems
Aluminium/stainless casings are weather and vandal resistant
On board movs provide protection against voltage spikes and surges
Assorted mounting brackets and filler plates available
Description
The MIR6B model contains a bond sensor to indicate that the door is secure, an internal timer that eliminates the need for add-on exit delays timers and a door status switch, relay and LED.
7907NOT TO BE USED FOR INSTALLATION PURPOSES.
Features
CATALOG NUMBER
Power Selector Jumpers:
A. 12V DC Input:Power Selector jumper for 12V DC operation. Connect the ground (-) lead from a 12V DC power source to terminal 2. Connect the positive (+) lead from a 12V DC power source to terminal 1.
B. 24V DC Input:Power Selector jumper for 24V DC operation. Unit is delivered from Factory with single jumper ON for 24V operation. Connect the ground (-) lead from a 24V DC power source to terminal 2. Connect the positive (+) lead from a 24V DC power source to terminal.
Printed Circuit Board Schematic(shown with all options)
1 2 3 4 5
RELAY 1
IC 1N
/O
N/CC+ -
Power Selector Jumpers
12V DC
24V DC
Bond Sensor
LED
Magnet
Internal Timer
Door Status Switch
Power Supply Wiring RequirementsIn context with the Power switch or solid state switching device installation to minimize the effect of residual magnetism install switch at location indicated in the schematic diagram CORRECT.
Magnetic Lock wiring Instructions
110 V AC
Switch or Solid StateSwitching Device
12or24
VDC
CORRECT
110 V AC
Switch or Solid StateSwitching Device
12or24
VDC
INCORRECT
Canada25 Interchange WayVaughan, Ontario L4K 5W3Telephone: (905) 660-4655Fax: (905) 660-4113
Web page: http://www.mircomgroup.com Email: [email protected]
Distributed by:
CAT. 7907Rev. 1
NOT TO BE USED FOR INSTALLATION PURPOSES.
U.S.A.4575 Witmer Industrial EstatesNiagara Falls, NY 14305Toll Free: (888) 660-4655Fax Toll Free: (888) 660-4113
Typical Installation
Armature plate mounts to Door
Typical Installation
Electromagnetic Lock Mounts to Door Frame
Model Description Features Current Draw DimensionsMIR6S 600 lbs Surface
Mount Single DoorBasic
500mA @ 12 V250mA @ 24 V
9 7/8" x 1 7/8" x 1"251mm x 48mm x 25mmMIR6B 600 lbs Surface
Mount Single Door with Sensor
Comes with Adjustable timer, Lock Sensor, Door Status Switch, Relay & LED
Ordering Information