MiniTrainer The The first step into the world of ... Catalog.pdf · The first step into the world of automation with the small PLC of. ... Fischertechnik-MiniTrainer 21 ... 1 x Assembly

Prices are at the end of the catalog

MiniTrainerThe MiniTrainer

The first step into the world of automation with thesmall PLC of


MiniTrainer

Content Page

The structure of the MiniTrainers 4

The MiniTrainerSchool 5

LOGO!-MiniTrainer 6

Universal (S7-1200)-MiniTrainer 7

Millenium-MiniTrainer 8

ZELIO-MiniTrainer 9

Lovato-MiniTrainer 10

EASY500/700-MiniTrainer 11

EASY800/Control –MiniTrainer 12

MFD-MiniTrainer 13

XC100/200-MiniTrainer 14

Reference books for the EASY 15(only in German)

Training modul traffic light 16

Adapter moduls for different models 17

Interface cable for MiniTrainers 19

Stands for MiniTrainers 20

Fischertechnik-MiniTrainer 21

PAL- Trainings board 22

Fischertechnik models 24

Power supplies 24

AS-Interface-filter modul 25

Pricelist 26


MiniTrainer

1

Didactic step 3

models

Didactic step 2

Training moduls

Didactic step 1

Exercise cards

The didactic concept of the MiniTrainers

3

Q2

Selbsthaltung

Bei der Programmerstellung ist auf die Drahtbruchsicherheit zu achten!

I2 Start

I6Stop

LOGO!-MT

I4 Stop

Q2

>1

&=

I5 Start

Q3S

R

Q2

Toiletten-Licht-Lüftersteuerung mit variable Nachlaufzeit

I5

S

LOGO!-MT

Q1

1: 5s 2: 10s3: 15s4: 20s

5s 1 2 3 4

Lüfter einLüfter Nachlauf

LOGO!-MT

Analoger Schwellwertschalter

IA1 IA2

Q1

Q2

250-350°C

SOLLwert250°C - 350°C

ISTwert250°C - 350°C

Heizung

Anlage EIN/AUS

Kessel


MiniTrainer

MiniTrainer :8 digital inputs, latching/momentary switches

MiniTrainerXL :additionally 4 digital inputs as push buttons (changeover contact) (see below)

Position for training cards

24 Pin-connector for connecting

training moduls and function-models

Construction

The NC contact can be switched off via the slide switch. Thus all

inputs via the interface connector are available and

have no default setting.

Additional buttons for all MiniTrainerXL (700)

4

24 VDC supply Input connector

2 analog inputs:0-10V

4 or 8 digital outputs (LED)

Output connector


MiniTrainer

Q2

Selbsthaltung

Bei der Programmerstellung ist auf die Drahtbruchsicherheit zu achten!

I2 Start

I6Stop

LOGO!-MT

I4 Stop

Q2

>1

&=

I5 Start

Q3S

R

LOGO!-MT

Analoger Schwellwertschalter

IA1 IA2

Q1

Q2

250-350°C

SOLLwert250°C - 350°C

ISTwert250°C - 350°C

Heizung

Anlage EIN/AUS

Kessel

Q2

Toiletten-Licht-Lüftersteuerung mit variable Nachlaufzeit

I5

S

LOGO!-MT

Q1

1: 5s 2: 10s3: 15s4: 20s

5s 1 2 3 4

Lü fter einLü fter Nachlauf

The MiniTrainerSchool since 2014 is supplied with the MiniTrainer. They are for theLOGO!, S7-1200, Millenium3, Zelio, easy500/700 and Lovato in German language and inthe moment for the Lovato also in English.The MiniTrainerSchool offers many possibilities to implement a modern, customer-orientedautomation. This exercise book with the basic building blocks of the programming of thecontrol manufacturer with many examples to be learned. Of course it is all optional tasksto modify or expand the exercises. On the accompanying CD each exercise has aproposed solution. The 30 exercise cards are matched to the exercises and settled in twoversions. Firstly, for the small MiniTrainer and the other for the larger MiniTrainerXL.MiniTrainerSchool, MiniTrainer and controllers offer a ideal training- and learning-platformfor the education and training. The MiniTrainerSchool is in four colors and DIN A5format.

With 30 training cards

MiniTrainerSchool

with solution-CD

5

EASY-MiniTrainerSchule EASY-MTS-DEASY-MiniTrainerSchool EASY-MTS-GB

Lovato-MiniTrainerSchule Lovato-MTS-DLovato-MiniTrainerSchool Lovato-MTS-GBLovato-MiniTrainerScuola Lovato-MTS-I

Millenium-MiniTrainerSchule Millenium-MTS-DMillenium-MiniTrainerEcole Millenium-MTS-F

LOGO!8-MiniTrainerSchule for OBA8 LOGO8-MTS-DLOGO!-MiniTrainerSchule for OBA6 LOGO-MTS-DLOGO!-ShkollaMiniTrainern for OBA6 LOGO-MTS-AL

S7-1200-MiniTrainerSchule S7-1200-MTS

ZELIO-MiniTrainerSchule ZELIO-MTS


MiniTrainer

LOGO!-MiniTrainer LOGO-MT

Suitable controller (order separately)

Logic Modul LOGO! 12/24-RC

LOGO!-MiniTrainer LOGO!-MiniTrainerXL

LOGO!-MiniTrainerXL LOGO-MTXL


Logic Modul LOGO! 12/24-RC Expansion module DM8 12/24 R

6

1 x LOGO!-MiniTrainer1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x CD : CBT from Siemens (only for Windows XP)

1 x Wooden stand1 x LOGO!8-MiniTrainerSchule (German)

30 Exercise cards and solution-CDNEW! with a training-card clamp

LOGO!-MiniTrainer: LOGO-MiniTrainerXL:

1 x LOGO!-MiniTrainerXL1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x CBT from Siemens (only for Windows XP)

1 x Wooden stand1 x,LOGO!8-MiniTrainerSchule (German)

30 Exercise cards and solution-CDNEW! With a training-card clamp

Please specify if the LOGO! -MiniTrainerSchool should be accompanied by OBA6!

Designation Order-no. Designation Order-no.


MiniTrainer

S7-1200-MiniTrainer UNI-MT


S7-1200 CPU 1214C DC/DC/DC

Universal(S7-1200)-MiniTrainer S7-1200-MiniTrainerSchule (German)

S7-1200-MiniTrainerSchule S7-1200-MTSISBN 978-3-88050-014-3

7

1 x Metal stand1 x Power supply (100..240VAC / 24VDC/1A)

1 x Assembly kit for a Universal MiniTrainer1 x mounting Instructions30 Exercise cards and solution-CDNEW! with a training-card clamp

Construction of the Universal MiniTrainerforS7-1200-MiniTrainer

The S7-1200 is not included in delivery!

1 x S7-1200-MiniTrainerSchule30 Exercise cards enclosed,(MiniTrainerSchule with solution-CD)1 x Automation Software CD - SIMATIC S7 Professionell V11 SP2 SE incl. Update 2

ISBN 978-3-88050-014-3

Note:The Universal-MiniTrainer is also using with the S7-300 and S7-1500!



MiniTrainer

Millenium-MiniTrainer:

1 x Millenium-MiniTrainer1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

Millenium-MiniTrainerXL:

1 x Millenium-MiniTrainerXL1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

Millenium-MiniTrainer Millenium-MT Millenium-MiniTrainerXL Millenium-MTXL

Suitable Starter-Kit Suitable Starter-Kit

1 x Starter-Kit with CD12 88970080 1 x Starter-Kit with CD20 88970082

Millenium-MiniTrainer Millenium-MiniTrainerXL

In addition, two buttons as changeover contact for I9/10 and I11/12

8

1 x Millenium-MiniTrainerSchule (German or French)


1 x Millenium-MiniTrainerSchule (German or French)


Starter-Kit:

• CD20• Software M3 (CLSM3)• USB-Programming cable

Starter-Kit:

• CD12• Software M3 (CLSM3)• USB-programming cable



MiniTrainer

ZELIO-MiniTrainer:

1 x ZELIO-MiniTrainer1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

ZELIO-MiniTrainerXL:

1 x ZELIO-MiniTrainerXL1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

ZELIO-MiniTrainer Zelio-MT ZELIO-MiniTrainerXL Zelio-MTXL

Suitable Starter Kit Suitable Starter Kit

1 x Starter-Kit SR2 PACKBD 1 x Starter-Kit SR2 PACK2BD

ZELIO-MiniTrainer ZELIO-MiniTrainerXL

Starter Kit: SR2 PACKBD

• SR2 B121BD • Software ZelioSoft 2• USB-Programming cable

Starter Kit: SR2 PACK2BD

• SR2 B201BD • Software ZelioSoft 2• USB-Programming cable

I2

I4

I3

I5

I6

Q3

&

>1=

=1

&

Funktionsbausteine

9

1 x ZELIO-MiniTrainerSchule (German)


1 x ZELIO-MiniTrainerSchule (German)




MiniTrainer

Lovato-MiniTrainer:

1 x Lovato-MiniTrainer (D and GB and I)

1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

Lovato-MiniTrainerXL:

1 x Lovato-MiniTrainerXL (D and GB and I)

1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand

Lovato-MiniTrainer Lovato-MT Lovato-MiniTrainerXL Lovato-MTXL

Suitable controller (order seperately) Suitable controller (order seperately)

LRD12TD024 LRD20TD024

Lovato-MiniTrainer Lovato-MiniTrainerXL

10

1 x Lovato-MiniTrainerSchool (D , GB , I)


1 x Lovato-MiniTrainerSchool (D , GB , I)


Controller ordered separately:

• LRD20TD024• Software LRXSW• USB-Programming cable

Controller ordered separately:

• LRD12TD024• Software LRXSW• USB-Programming cable

In Germany:Lovato Electric GmbHIm Ermlisgrund 30D-76337 WaldbronnE-Mail: [email protected].: 07243-766937-0

In addition, two buttons as changeover contact for I7/8 and IB/IC

In Italy:Lovato Electric S.P.A.Via Don E. Mazza. 1224020 GORLE (Bergamo) ItalyE-Mail: [email protected].: 035 4282111



MiniTrainer

EASY512-MiniTrainer EASY500-MT EASY700-MiniTrainer EASY700-MTRelay-adapter EASY700-RA

Suitable controllers Suitable controllers

Control relay EASY EASY512-DC-TC Control relay EASY EASY721-DC-TC Control relay EASY EASY512-DC-RC Control relay EASY EASY719-DC-RC

Toiletten-Licht-LüftersteuerungToilet-Light-and-Fan Control

Controlador de la luz y el ventilador de un bano

S5

Lichtlampluz

Lüfter

fanventilador

Schalter

switchinterruptor

Q1

Q2

~

Seite 105 (A6.2.1)

EASY500-MiniTrainer:

1 x EASY500-MiniTrainer1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand1 x EASY-MiniTrainerSchule (German)


Options:

Either theEASY512-DC-TC (Transistor outputs)or theEASY512-DC-RC (Relay outputs) can be used

Both variants can be used directly!


1 x EASY700-MiniTrainer1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x Wooden stand1 x EASY-MiniTrainerSchule (German)


Options:

Before plugging the relay variant, therelay adapter (EASY700-RA) is required.

Either theEASY721-DC-TC ( 8 Transistor outputs)or theEASY719-DC-RC ( 6 Relay outputs) can be used.

EASY500-MiniTrainer EASY700-MiniTrainer

11



MiniTrainer

1 x EASY700-MiniTrainer1 x EASY800-Adapter-Kit1 x Power supply (100..240VAC / 24VDC/0,75A)



EASY800-MiniTrainer EASY800-MT EASY800-MiniTrainer EASY800-MTSuitable controllers Suitable controllers1 x Control relay EASY EASY822-DC-TC 1 x EASY-Control EC4P-221-MTAD1 1 x Control relay EASY EASY820-DC-RC1 x Relay-Adapter EASY800-RA1 x EASY800-Adapter-Kit EASY800-AK

Also for theEASY-Controlused!

Options for the EASY800-MT:

Notes:• Before plugging the relay variant, the

relay adapter (EASY700-RA) is required.

• If a EASY700-MT be used for the EASY800, then the EASY800 Adapter Kitis be ordered separately.

Either theEASY822-DC-TC ( 8 Transistor outputs)or theEASY820-DC-RC ( 6 Relay outputs) Can be used!.

EASY800-Adapter KIT

LED display for analog output

Outbreaks for bus connection

EASY800 or EASY-Control

EASYControl-MiniTrainer:

However, as EASY800 MiniTrainer

EASY800-MiniTrainer EASY-Control-MiniTrainer

12



MiniTrainer

MFD-MiniTrainer:

1 x MFD-MiniTrainer1 x MFD-metal stand1 x Power supply (100..240VAC / 24VDC/0,75A)

1 x EASYSOFT-Demo-CD with manual

MFD-MiniTrainer MFD-MT Suitable controller1 x CPU-module MFD-CP8-NT 1 x I/O-module MFD-RA17 1 x Display module MFD-80B

MFD-MiniTrainer

13

Back view1. 24 Pin interface connector2. 24 VDC supply3. 4 x LED outputs4. 4 x latching/momentary switches5. I/O-connector

Note:

The MFD-MiniTrainer offers for the 4 dig. outputs LEDs, 4 latching/momentary switches for I01-I04 and the MiniTrainer standard interface connector for connection of models,

Designation Order-no.


MiniTrainer

Note on equipping:

XC100/200-MiniTrainer XC-MT

1 x XC100/200-MiniTrainer with adapter1 x Power supply (100..240VAC / 24VDC/1A)

• Exercise cards with solutions• Applications of TB2700-017-D

XC100/200-MiniTrainer:

example:

XC200

XC100:XC-CPU101-C64K-8DI-&DOOrder-no. by Eaton: 262152

XC200:XC-CPU201-EC256K-8DI-&DOOrder-no. by Eaton: 262155

Analog-In/Out1 x XIOC-2AI-1AO-U1 262409

Backplane:1 x XIOC-BP-XC 2607921 x XIOC-BP2 260794

Analog outputLED-display

14

Suitable controllersXC100 or XC200-componets please orderdirectly by EATON!

XC100/200-MiniTrainer



MiniTrainer

Steuern mit der EASYGrundlehrgangAuflage, ca.116 Seiten, DIN-A4, s/w,CD mit 40 Übungen, Lösungen undEASY-SOFT-DemoAutoren: Klaus Machalek, Hans Reuter

Dieser Grundlehrgang bietet den Einstiegin die Welt der Automatisierung an Handder verschiedenen EASY-Steuerrelais, derEASY500 / 700 / 800 und dem MFD-Titan.Von der einfachen Verknüpfungslogik biszum CAN-basierten EASY-Netzwerk,bietet das Heft Stoff zum Üben und Lehren.

Steuern mit der EASY 2FachlehrgangAuflage, ca.90 Seiten, DIN-A4, s/w,CD mit 10 Projekten, Lösungenund EASYSOFT-DemoAutor: Klaus Machalek

Dieser Fachlehrgang baut auf Band 1auf.Der Schwerpunkt liegt in verschiedenenProjekten. Neben der EASY500 / 700 istvor allem die EASY800 und das MFD-Titan die Übungsplattform dieses Fach-lehrgangs. Die Projekte umfassen u. a.die Analogverarbeitung, die Arithmetik.Einbinden von Drehgebern, Pulsweiten-modulation und Visualisierung.

ISBN-no.

Specialist books for the EASY (German)

Steuern mit der EASY Grundlehrgang 3-87125-754-0

Steuern mit der EASY 2 Fachlehrgang 978-3-86522-280-0

15

Designation


MiniTrainer

This training module consists of a printed circuit board with a size of about 85 x 75mm. The pedestrian traffic light has with the various buttons and lights a wealth of exercises. From a simple "yellow flashing" until it detects a defective RED traffic light provides the tasks collection different solutions for the LOGO!, EASY, Zelio and Millenium.

The included traffic light exercise book with the Solutions CD provides a good platform for order-set of different exercises.

Training module Traffic light

Traffic light module MT-TL-GBincl. Exercise bookand solution-CD

Pedestrian requirements button

„Induction loop“ for cars

Street lamps

Traffic light – Exercise book

16



MiniTrainer

About 2 mm - standard plug allows to connect the commercial models of Fischertechnik.These possibilities of the implementation of exercises in a motion-dependent solution is particularly interesting, as well as the creativity in building the model is required.

The special feature of this adapter, the built-in solid state relays, over which a motor direction is switch via two outputs directly in both rotations. An additional circuit is not necessary.

Adapter module for all Fischertechnik-models

Adapter for allFischertechnik-models MT-FT(24VDC)

This adapter modules provide direct connection to the different 24 VDC - function models. Accordancewith the manufacturer, there are different adapter modules. This possibilities of implementation of tasksin a motion-dependent solution another challenge in the field of education and training.

Adapter modules for a lot of models

Functional scheme of themotor switchover:

Digitaloutput

0V

24V 0V

Digitaloutput

0V

24V 0V

17

plug jacks



MiniTrainer

Adapter module for Christiani-models

Outputs

Adapter for MT-CA Christiani 24VDC-models

Adapter module for ELABO-models

About the ELABO standard plug allows the ELABO models connect directly. On the underside of ELABO adapter provides the ability to interrupt all connections. Thus, it can very easily implement a fault simulation.

Front Back side with fault simulator

Adapter for MT-ELELABO 24VDC-models

The Christiani adapter provides the appropriate ribbon cable connections for the separate input and output assignment of Christiani-models.

Inputs

18



MiniTrainer

Interface cable for all MiniTrainers

24 pin flat ribbon cable, 1m long, for the individual connection of actuators and sensors tothe MiniTrainer.

Example:Connection to the models etc.

The pin assignment on the various MiniTrainers is as follows:

0 V 3 4 0V

+24 VDC 1 2 +24 VDC

I 1 5 6 Q1

I2 7 8 Q2

I3 9 10 Q3

I4 11 12 Q4

I5 13 14 Q5

I6 15 16 Q6

I7 17 18 Q7

I8 19 20 Q8

I9 21 22 I11

MiniTrainerXL(700/800)

0 V 3 4 0V

+24 VDC 1 2 +24 VDC

I 1 5 6 Q0

I2 7 8 Q1

I3 9 10 Q2

I4 11 12 Q3

I5 13 14 Q4

I6 15 16 Q5

I7 17 18 nc

I8 19 20 nc

U 0 21 22 nc

XC100/200-MTS7-1200

0 V 3 4 0V

+24 VDC 1 2 +24 VDC

I1 5 6 Q1

I2 7 8 Q2

I3 9 10 Q3

I4 11 12 Q4

I5 13 14 nc

I6 15 16 nc

I7 17 18 nc

I8 19 20 nc

nc 21 22 nc

MiniTrainer(500)

U 1 23 24 U 10nc 23 24 nc

19

MiniTrainer-Interface flat ribbon cable (ca. 30cm) MT-IK1 unilateral struck with socketflat ribbon cable (ca. 30cm) MT-IK2 struck on both sides with jacksflat ribbon cable (ca. 30cm) MT-IK3 one side socket, other side plug struck



MiniTrainer

To improve the handling and operation of the MiniTrainer this metal stand can be used.

Metal stands for all MiniTrainer

Metal stand 5035-3015

Included in delivery:

1 x Metal stand, galvanized, with rubber feet1 x mounting material

1)

1)

For the MFD MiniTrainer there is a special metal stand.

Examples:

Dimensions:

Width x Length x Height: 245 x 160 x 56 mmmounting surface 245 x 125 mminstallation surface 245 x 160 mm

20



MiniTrainer

Fischertechnik- MiniTrainer

The Fischertechnik-MiniTrainer is used as a component on all Fischertechnik base plates. Thestandard housing is sheetingable directly with the Fischertechnik components. Connectors onthe circuit board have the structure of any conventional compact control units, such as theLOGO!, the EASY500 that CD12 Crouzet that. SR2 121 BD of Schneider Electric or LRD12Lovato. The Fischertechnik-MiniTrainer be used for all models 9VDC or 24VDC for the modelsof Fischertechnik.

If you use a 9V models the Fischertechnik-MiniTrainer offers a voltage regulator 9V to 12V,the power supply ready for the lamps and motors. The control itself is supplied with 12VDC.

For 24V models is to make sure that all Fischertechnik components are also designed for 24VDC.

The direction of rotation of the motor model is implemented using built-in relay. Two outputs(see sketch) can drive one motor.

Fischertechnik-MiniTrainer FT-MT12(for all 9VDC-models)

21

Example: Bestückt mit der LOGO! 8



MiniTrainer

Mounting plate 5035-3005

Marshalling panel 5035-3003

PAL-Training board

This board consists the following components:1 x Mounting plate1 x Marshalling panel

Option:1 x MiniTrainer1 x ControllerProcess simulation cards and exercises on the next page!

PAL = Prüfungsaufgaben- und Lehrmittel- Entwicklungsstelle der IHK-Stuttgart

Rangierverteiler

Prozess-simulationskarte

In preparing the intermediate examination and especially for the final examination in the occupational field electrician / technician for industrial engineering and mechatronics for / in this concept provides an ideal platform to practice. Also in training occupations of metal professions is this learning environment a cheap and didactically useful offer. At various process simulation map exercises with solutions are offered.

marshalling panel

mounting plate

Galvanized sheet steel, with stand 350 x 255 mm

Process-

simulation cart

Example:

PAL-Training board with the LOGO!-MiniTrainerXL

Examination papers and teaching material development site of the Stuttgart Chamber of Commerce

Design works for education and training


22


MiniTrainer

PAL-Training board

Example:

Process simulation Bending machine

More Process simulation cards in English:

Because adding new annual process simulation cards you will find thiscurrent order data under www.feltron.de

Process simulation Process simulation Cleaning system

Process simulation Dust collection container

23

Documents with exercises and solutions-CD for the following process simulation cards (in English):

Car wash site

Following learning matters will be mediated:1.Exercise of wiring / test of wiring2.Exercises:

1.Implementation fromlogic operations

1.Set- and Reset function2.Current impulse function

1.Applications:1.Manuel testing of the bending beam 2.Exercises with different pressure set points3.Automatic process Visualisation and display functions4.Bending with variable angle of bend (simulation)

In the exercises will be used :•dig. In- and outputs•analogue inputs•timer•counter


MiniTrainer

24

Typ Suitable controllers for all modells:

LOGO!12/24-RC (+ DM8 12/24) S7-1200EASY512-DC-RC (EASY721-DC-TC)CD12-Einsteiger-Kit oder CD20-Einsteiger-KitSR2 PACKBD oder SR2 PACK2BDLRD12 oder LRD20

Compact Car Wash LineCompact Burning Kiln with Door ControlCompact Conveyor BeltCompact Test Station with Conveyor BeltCompact Solar TrackerCompact Flexible Process Line with 1 machine tool

Compact Flexible Process Line with 2 machine tools

Compact Transport- and Sorting Line

Compact Burning KilnWith Door Control

Compact Car Wash Line

Compact Test StationWith Conveyor Belt

Compact Conveyor Belt

Compact Solar Tracker

Compact FlexibleProcess Line with2 machine tools

Comact Transport and Sorting Line

Notes:• In some models, a stronger power supply must be ordered for the MiniTrainer! Please ask!• The adapter cable for connecting the MiniTrainer is always included.


MiniTrainer

Power supply

Part of all MiniTrainers is a stabilized power supply unit. It is characterized by the followingData:Technical data for 24VDCPower supply unit:Input: 100..240 VAC 50..60 Hz, Output: 24 VDC, 750 mAHousing IP 40

Power supply 24VDC SN24 AS-I-filter module ASI-FI

Power supply 12VDC SN12

The 24 VDC power supply via a5mm round plug. The cable length is ca. 2m

Technical data for 12VDCPower supply unit:Input: 100..240 VAC 50..60 Hz, Output: 12 VDC, 1500 mAHousing IP 40

AS-Interface-filter module (AS-I)

The actuator-sensor bus (AS-I) connects to the lowest field level ofAutomation technology actuators and sensors. About a non-ge-shielded two-wire cable to the 30VDC supply voltagetion, the serial data is modulated. This makes a specialFilter in the power supply required. This filter ensuresthat no data on the power supply to the public network advised.

In relation to the didactic concept, to save costs, among other things,one can in the education and training to the specific AS-I power supplywhich forego by taking advantage of the usual standard 24 VDC and theAS-I filter module presents the supply of 24VDC AS-I bus. Since information area of the AS-I bus max. 1-2m long is used, thefunctionality secured. However, if cable lengths of 5m andused more (max. 100m), a standard AS-I power supply shouldbe used with integrated filter.

24 VDC

AS-I-supply

25


Price list: MiniTrainerCatalog 2016Page Products Type LP €

4 LOGO!-MiniTrainerSchule (D) LOGO-MTS 15,00 €4 LOGO!-ShkollaMiniTrainer (AL) LOGO-MTS-AL 15,00 €4 EASY-MiniTrainerSchule (D) EASY-MTS 15,00 €4 EASY-MiniTrainerSchule (GB) EASY-MTS-GB 15,00 €4 ZELIO-MiniTrainerSchule (D) ZELIO-MTS 15,00 €4 Lovato-MiniTrainerSchule (D) Lovato-MTS-D 15,00 €4 Lovato-MiniTrainerSchool (GB) Lovato-MTS-GB 15,00 €4 Lovato-MiniTrainerScuola (I) Lovato-MTS-I 15,00 €4 Millenium-MiniTrainerSchule (D) Millenium-MTS 15,00 €4 Millenium-MiniTrainerSchule (F) Millenium-MTS-F 15,00 €5 LOGO!-MiniTrainer + MTS LOGO-MT 143,00 €5 LOGO!-MiniTrainerXL+ MTS LOGO-MTXL 158,00 €5 Logic module LOGO!-12/24-RC 117,00 € 4)5 Expansion module DM8 12/24 R 64,00 € 4)6 Universal(S7-1200)-Minitrainer UNI-MT 179,00 €6 S7-1200-MiniTrainerSchule (D) S7-1200-MTS 24,95 €7 Millenium-MiniTrainer+MTS Millenium-MT 143,00 €7 Millenium-MiniTrainerXL+MTS Millenium-MTXL 158,00 €7 Starter-Kit with the CD12 88970080 203,00 € 3)7 Starter-Kit with the CD20 88970082 259,00 € 3)8 Zelio-MiniTrainer+MTS Zelio-MT 143,00 €8 Zelio-MiniTrainerXL+MTS Zelio-MTXL 158,00 €8 Starter-Kit with the SR2 B121BD SR2-PACKBD 160,08 € 1)8 Starter-Kit with the SR2 B201BD SR2-PACK2BD 233,00 € 1)9 Lovato-MiniTrainer+MTS Lovato-MT 143,00 €9 Lovato-MiniTrainerXL+MTS Lovato-MTXL 158,00 €

10 EASY512-MiniTrainer EASY500-MT 143,00 €10 EASY700-MiniTrainer EASY700-MT 158,00 €10 Control relay EASY500 (Transistor) EASY512-DC-TC 109,50 € 2)10 Control relay EASY500 (Relais) EASY512-DC-RC 124,00 € 2)10 Control relay EASY700 (Transistor) EASY721-DC-TC 155,50 € 2)10 Control relay EASY700 (Relais) EASY719-DC-RC 155,50 € 2)10 Relay adapter for the EASY700 EASY700-RA 47,00 €11 EASY800-MiniTrainer+MTS EASY800-MT 211,00 €11 Control relay EASY800 (Transistor) EASY822-DC-TC 252,00 € 2)11 Control relay EASY800 (Relais) EASY820-DC-RC 252,00 € 2)11 Relay adapter for the EASY800 EASY800-RA 47,00 €11 EASY800-Adapter-Kit EASY800-AK 53,00 €11 EASY-Control EC4P-221-MTAD1 420,50 € 2)12 MFD-MiniTrainer MFD-MT 153,00 €12 MFD-CPU-module wit network MFD-CP8-NT 239,00 € 2)12 E/A-module (relay) MFD-RA17 109,00 € 2)12 Display-module with keyboard MFD-80B 88,00 € 2)13 XC100/200-MiniTrainer XC-MT 290,00 €14 Steuern mit der EASY-Grundlehrgang 3-87125-754-0 15,61 € 5)14 Steuern mit der EASY-Fachlehrgang 978-3-86522-280-0 16,64 € 5)15 Training module Traffic light with exercise book and CD MT-TL+ 88,00 €16 Adapter module for Fischertechnik MT-FT 75,00 €17 Adapter module for Christiani MT-CA 75,00 €17 Adapter module for ELABO MT-EL 75,00 €18 Interface-cable (ca. 30cm), unilateral struck with socket MT-IK1 12,00 €18 Interface-cable (ca. 30cm), struck on both sides with jacks MT-IK2 12,00 €18 Interface-cable (ca. 30cm), one side socket, other side plug struck MT-IK3 12,00 €19 Metal stands for all Minitrainers 5035-3015 12,00 € 7)20 Fischertechnik-MiniTrainer for 9VDC-models FT-MT12 150,00 €20 Fischertechnik-MiniTrainer for 24VDC-models FT-MT24 150,00 €23 PAL-Training board-mounting plate 5035-3005 38,00 € 7)23 PAL-Training board-marshalling panel 5035-3003 93,00 €25 Compact Car Wash Line 226002 1.090,00 € 6)

Price list: MiniTrainerCatalog 2016Page Products Type LP €

25 Compact Burning Kiln with Door Control 226007 349,00 € 6)25 Compact Conveyor Belt 226005 250,00 € 6)25 Compact Test Station with Conveyor Belt 226008 349,00 € 6)25 Compact Solar Tracker 226012 349,00 € 6)25 Compact Flexible Process Line with 1 machine tool 226006 349,00 € 6)25 Compact Flexible Process Line with 2 machine tools 226003 690,00 € 6)25 Compact Transport- and Sorting Line 226004 850,00 € 6)26 MiniTrainer-Power supply (24VDC) SN24 27,00 €26 MiniTrainer-Power supply (12VDC) SN12 27,00 €26 AS-Interface- filter module ASI-FI 98,00 €

1) List price 2013 Schneider-Electric2) List price 2014 EATON Prices subject to change!3) List price 2014 Crouzet4) List price 2014 Siemens5) Book price6) List price 2013 Staudinger GmbH7) List price 2014 Feltron-Zeissler GmbH

Shipping flat rate of € 6 within Germany (up to 10k)flat rate of € 16 within Europe (up to 10k)

Prices Prices in Germany + VAT