Embed Size (px)
Citation preview
MINISTRY OF OIL MIDLAND REFINERIES CO. (G.CO.)
(DAURA REFINERY) ADVERTISMENT
MIDLAND REFINERIES CO. ANNOUNCES FOR PURCHASING THE MATERIALS AS STATED BELLOW:-
REQ.NO. DESCRIPTION QTY ADVERTISMENT NO.
BID BOND
1209/2015 PIPE FITTING 92 ITEMS ONCE 3000 $
1-The Requisition to be sold in (250, 000) Iraqi dinars; Un returnable. 2-Technical and Commercial offer should be opened at The same time, The representatives of the companies can be attend to our
company (MRC) at 10 O’clock morning one day after the closing day stated below in item (25) . 3-Offered prices should be (CIP) Baghdad / Daura refinery and preferred to be in us dollar. They will be final and un negotiable. (MRC) is not obliged to accept the lowest prices. 4-Offeres (Technical & Commercial) to be submitted, Separately in sealed envelopes, either directly at (MRC) reception bureau or sent by(DHL). The requisition number, the description and the closing date should be fixed on both envelopes. The validity of the offer should be mentioned within the technical offer ; also on the envelope of the commercial offer. Offers sent by E– mail will be neglected.
5- The validity of the Bid Bond and the offer should be mentioned within both offers and should not be less than (120) days. 6- All pages of, Both, The Technical and Commercial offers should be numbered in sequence, Including The Attachments and Documents. 7-All Documents (Profile) and similar contracts achieved, issued by Governmental Contracts should be submitted before purchasing the Req. – for the current year or enclosed within the technical offer. 8- A BID BOND OF AMOUNT THAT STATED IN THE ADVERTISEMENT ABOVE AGAINST EACH TENDER SHOULD BE SUBMITTED WITH COMMERCIAL OFFER FROM ONE OF THE PARTICIPANT IN THE COMPANY ACCORDING TO INSTRUCTION AS (LETTER OF GUARANTEE , CERTIFIED CHEQUE OR BANK GUARANTEE) (ORIGINAL COPY), ISSUED FROM :( KURDISTAN INTERNATIONAL BANK , NORTH BANK , ARPIL INTERNATIONAL BANK, GIHAN BANK FOR ISLAMIC INVESTMENT & FINANCE , UNION BANK OF IRAQ , AL MANSOUR BANK FOR INVESTMENT , NATIONAL ISLAMIC BANK , REGION FOR BUSINESS INVESTMENT AND FINANCING ( EMERALD BANK BEFOR), BANK OF BAGHDAD , GULF COMMERCIAL BANK , SUMER FOR COMMERCIAL , CREDIT BANK IRAQI , INVESTMENT BANK OF IRAQ , ASHUR INTERNATIONAL BANK FOR INVESTMENT , INTERNATIONAL DEVELOPMENT FOR INVESTMENT &FINANCE , NATIONAL BANK OF IRAQ , IRAQI ISLAMIC COOPERATIONAL BANK FOR INVESTMENT , COMMERCIAL BANK , BYBLOS BANK , DIJLAH & FURAT BANK FOR DEVELOPMENT & INVESTMENT .AND RELEASED IMMEDIATELY IN CASE THE REQUISITION IS NOT AWARDED. CHEQUES & BANK GUARANTEES ISSUED FROM [ALWARKAA BANK – ISLAMIC BILAD BANK-, UNITED BANK FOR INVESTMENT OR BASRAH INTERNATIONAL BANK, AL- HUDA BANK ,ECONOMY BANK FOR INVESTMENT -FINANCE & IRAQI MIDDLE EAST INVESTMENT BANK] ARE NOT ACCEPTABLE. THIS BID BOND SHOULD BE VALID FOR NOT LESS THAN (120) DAYS. 9- The Delivery period (In days) should be, exactly specified.
10-Basic Terms of payment is by Irrevocable & Unconfirmed letter of credit to be paid (100%) after the receipt of goods in Baghdad complete and as ordered. other terms of payment may be, mutually, agreed upon latter and for certain conditions, which are : a portion of the total amount to be paid, but against bank guarantee or by bank transfer if requested by any company and by Iraqi dinar only , for Iraqi companies.
11- DELAY PENALTY TO BE APPLIED WITH TOTAL AMOUNT, NOT EXCEEDING (10%) OF THE TOTAL VALUE OF THE P/O. 12- - An Unconditional Performance Bond of (5%) of The Total value of The L/C to be submitted, from one of the participant in the company according to instruction before signing the contract and from one of the banks mentioned in item (8) within (15) fifteen Days from the Date, The Supplier is Informed of the award. For any delay beyond the specified period, The award will be cancelled and the supplier will be considered as a shirker. The issue of the (L /C) depends, mainly, on submitting this bond. The performance bond should be valid for two months later than the delivery period or until the guarantee period (if stated), Is over. This performance bond will be released after the receipt of goods complete and as ordered and the supplier has fulfilled all his commitments regarding the p/o. otherwise, it will be confiscated.
13- (2.7%) of the total value of the contract to be deducted as taxes for Iraqi companies. also, in case the payment is in Iraqi dinar. for non-Iraqi companies, this amount will be retained as taxes and will be released when a tax discharge issued by (the Iraqi state committee of taxes) in favor of the company is submitted within (180) days from the date of receipt of the goods complete and as ordered. Otherwise, this amount will be sent to the (tax committee) and 30% for the contract contain onside installation and operation. 14- (0.002) off the total value of the contract to be deducted as stamp charges. 15- A sum of (id 205,000.00), to be deducted as cost of import license. 16- Origin Certificate should be approved by Iraqi Embassy/Commercial attaché in the country of origin. 17- The participant has no right to omit or make any amendment, whatsoever, to any of the paragraphs of the requisition document. 18- The Origin of the materials should be specified in the offer and fixed. And will not be changed for any reason. 19- Third Party Inspection Certificate should be provided from one of the following companies: [LIOYDS REGISTER – BUREAU VERITAS - INTERTCK GLOBAL - TUV RHENLAND - DNV]
20- All offers and correspondences should be, Clearly, Signed by the general manager or whom is officially empowered via power of attorney. Otherwise the offer will be neglected. 21- IT IS NECESSARY TO PRESENT AUTHORIZATION LETTER FROM THE MANUFACTURER COMPANIES CERTIFIED FROM MINISTRY OF FOREING AFFAIRS OR EMBASSY OR CONSULATE OR THE COMMERCIAL ATTACHED IN COUNTRY OF ORIGING 22- In case the supplier fails to supply all or part of the requested materials as ordered and according to the technical specification stated in the purchase order, our company has the right to deduct their cost at the highest offered price submitted by competitors in the table of price analysis for such items. 23- The awarded supplier will bear the advertising fees. 24- Iraqi laws are applied : The Tender and The Contract shall be governed and construed according to the Iraqi law. Courts shall have the exclusive jurisdiction to hear and determine all actions and proceedings arising out of the contract. Governmental debts collection law (no. : 56), for the year 1977 shall be applied on amounts owed to (MRC). 25- Closing date: 16 / 3 / 2015, till (1.00) o’clock (afternoon). Note: you can find the conditions of submitting offers on website:
www.mrc. oil.gov.iq - www.oil.gov.iq SAAD NOORI MOHAMMED
G. MANAGER .oil.gov.iqinfo@mrc البريد ا,لكتروني لشركة مصافي الوسط
I
REO.NO. 1209/2015 - 'T r QTY I UNIT - OCAB NO IDESCRIPTION
I PIPE FITTI G .,..-- -
COUPLING CARBON STEEL SCREWED ENDS FOR COLD I SERVICES, RATING # 3000 LBS CONFORM TO ASTM
2.
(A350 GR . F1) AND THREAD 0 ANSI ( B 1.20.1 ) 1 . 48 NOS I 221 204/106.2 1"
• ---1-
~.NOS I -/109.2~' - - - - - 'oaoj. REDUCER COU PLING SCREWED ENDS RAn NG # 3000
LBS. CARBON STEEL COLO SERVICE TO ASTM I I A- 50 G A E LF1 ) TH EADED TO ANSI t B 1.20.1 )
\.
'-'
--3. 45 I NOS 4. 30 NOS 5. 30 NOS
. ~ I I
, 6. I 45 NOS r:;- 25 NOS
~ NOS ,·
' 9. I 40 !NOS I 11 88.2
I - --10. 45 NOS 11. 45 NOS 12. 45 NOS
13. 30 NOS
14. 45 NOS
- - - --- I
1305.2 ; 1/2" X 1/4" I 1310.2 I 3/4" X 1/2" 1
131 4.2 i 1" X 1/2" -1
! , ELBOW 90 RATI NG # 3000 LBS LONG RADIUS. CARBON I
IISTEEL COLD SERVICE TO ASTM (A- 350 GRADE LF1 ) THREADED TO ANSI (B 1.20.1 }
221206/044.2 1/2" 1046.2 1" 1048.2 1.1/2 "
ELBOW 45 ,# 3000 LBS ,COLD SERVICE TO ASTM (A-350 GR LF10R LF2) SCRWED TO ANSI(B 1.20.1) 1.1/2" ~ TEE SCREWED RATING # 3000 LBS CARBON STEEL I COLD SERVICE TO ASTM ( A- 350 GRADE LF1 ) I
TH READED TO ANSI (B 120.1 ) ~ 221210/044.2 1/2"
1046.2 1" 1049.2 2" I
UNION #3000 LBS SCREWED CARBON STEEL COLD SERVICE TO ASTM (A- 350 GRADE LF~) THREAD TO ANSI (B 1.20.1 )
221212/042.2 1/4"
1048.2 1.1/2"
SWEDGE NIPPLE SCH 40 CON. SCREWED COLD SERVICE CARBON STEEL MATERIAL CONFORMING TO ASTM (A 333 GR 6 ) .\
15. 40 NOS 221213/107.2 3" X 1.1/2" I I
I ELBOW 45° RATING # 3000 LBS FOR COLD SERVICE CONFORMING TO ASTM (A 350 GR LF2) SOCKET WELD TO ANS I ( B 16.11 ) .-4 .....
116. 60 NOS 221226/188.2 1.1/2" 3000 # ELBOW 45° TEE REDUCER RATING # 3000 LBS MATERIAL FORGED
• CARBON STEEL FOR COLD SERV'ICE CONFORMING TO ASTM A350 GRADE LF2 ENDS SOCKET WELD ACCORDING TO ASME ( B.16.11)
17. 30 NOS 221227/335.2 3/4" X 3/4" X 1/2" ELBOW, 3000 LBS, FORGED ALLOY STEEL (5% CHR & 1/2% MO) CONFORMING TO ASTM I (A- 182 GR .FS)SCREWED TO ANSI (B 1.20.1) I
18. 30 NOS 221606/046.2 1" ELBOW 90 I- -
I SWE DGE NIPPLE RATING # 3000 LBS SCH 80 ALLOY STEEL (5%rwQ + 1/2% MO)CONFORMING TO ASTM
I (A -182 GR J )
'1 9, 30 NOS 221616/193 .2 1" X 1.1/2"
1-6
I
. . I ........ ! I .. V"',",W ... v ' uc.,;:) ..... ,..,,,, I I VI'4I .. '-I" ••
ELBOW 90° LO G RADIUS SOCKT WELD RATI G 3000 LBS) MATERIAL ALLOY STEEL (S% CR + O.S% MO)ICONFORMIf-lG TO ASTM (A-182 GRADE-FS) AND ANSI
_______----;-_____ I. (B16.11) 20. 2 I NOS ! 221626 /046.2 11"
' TEE EQUAL SOCKT WELD (S.W) RATING (3000 LBS) , MATERIAL ALLOY STEEL (5% CR + 0.5% MO ) I CONFORMING TO ASTM (A-182 GRADE-F5) AND ANSI
. _ _ _ . (B16.11 ) '~'H 19 I NOS 1 221627/045.2 3/4" "22. 19 NOS 10 4 .2 . 1"
~----------~~-------~--------TEE EQUAL MATERIAL FORGED ST. STEEL (1 8/8) TO ASTM ( A - 182 F -31 6) RATI NG #3000 LBS AND FEMALE SCREWED TO AN SI B 1.20.1
~~--+--r-------+---- -~--~--------------~
~3. 20 24.' 9 25. 8
NOS ' 221810/044.2 %" NOS 1048 .2 1.1/2"
TEE - REDUC ER MATERAIL FORGED ST - STEEL ( 18/8 ) TO ASTM (A -182 F - 316) I RATING # 3000 LBS ,AND FEMALE SCREWED TO ANSI B 1.20.1
NOS 1_' 1049.3 2"
r-~---r---+ -----~
7 NOS 1335.2 %" X %" . 6 NOS 1345.2 1" X %" -1--T I CAPS, (SUCH 40) SEAM LEES CARBON STEEL FOR COLol
SERVICE TO ASTM ( A- 420 GR WPL 3) BUTT WELDING I
26.
I ' I ENDS TO ANSI (B.16.91 I
- - ~ 4
.28 . I 19 I NOS 222205/131.2 3" . . .. -rr ---. -_. - ELBOW 90 0 LONG RADIUS SEAMLESS CARBON STEELI I BUTT WELDING ENDS TO ANSI (B16.9) FOR COLD
I I SERVICE TO ASTM (A- 420 GRADE WPL ;D.,! 29. 45 NOS 222206/129.2 2" SCH 40 130. 40 NOS /133.2 4" SCH 40 ,
--- _ .131. 30 NOS 1206.2 1" SCH 80
I ELBOW 90 0 SHORT RADIUS SEAMLESS CARBON STE~ BUTT WELDING ENDS TO ANSI (B16.9) FOR COLD SERVICE TO ASTM ( A- 420.GRADE WPL 3) . SCH40 ....
32. 7 NOS 1577.2 10" . ELBOW45° SEAMLESS CARBON STEEL FOR COLD
SERVICE TO ASTM( A- 420 GRADE WPL 3) BUTT WELDING ENDS TO ANSI (B.16.9 )
I SIZE SCHi e133. 30 l NOS 222207/129.2 2" 40 34. 30 NOS /133.2 4" 40
I , TEE STRAIGHT SEAMLESS CARBON STEEL BUTT WELDING ENDS TO ANSI (B.16.9) TO ASTM (AA20 GRADE WPL 3) FOR COLD SERVICE
, SIZE SCH 35. 6 NOS 222210/136.2 8" 40
REDUCER CONCENTRIC, SCH40 SEAMLESS CARBON STEEL (FOR COLD SERVICE)TO ASTM (A- 420 GRADE WPL 3) BUTT WELDING ENDS TO ANSI (B.16.9 ) ..
36. 29 NOS 222212/323.2 3" X 2" . NOS \ I37. 37 1342.2 6" X 2"
,---.
2-(j .
- - -
\ II \ l..l l Y \ U NI I 1 VU(,;A tj NU I U l:: ~ c.;R IPTION
REDUCER ECCENTRIC EAMLESS CARBON STEELTO I ASTM ( A- 420 GR WPL 3) FOR COLD SERVICE,BUTT
I WELDING ENDS TO ANSI(B.16.9 L §CH 40) I 38. 32 IDS 222213/322.2 I 3" X 1.1/2" ~
1- - I . rELBOW 90 0 SEAMLESS ONG RADIUS - I , I CARBON STEEL FOR LOW TEMPERATURE SERVICE
CONFORMING TO ASTM ( A 420 GR WPL 6 ) ENDS BUTT i
WELD ACCORDING TO ANSI 25 --~~s~I--22221 4/1 29 . 2~1~ ~~~~N0~ ~~------ 2~If--S C H 40· 39.
- o. 37 NOS I 1~ . 2 1 3~ SC H 40 ·41.-14 NOS 1206 2 1" SCH 80
B 16.9
i i I . .--.-----fl- - TRAIGHT-SE - -LESS CARBON-S-TEEL-FOR COT-E-E- S - - - - - - -·AM - - - - - ---- - - - - - - - - L[)"'
1 SERVICE TO ASTM ( A - 420 GR WPL 6 ) I BUTT WELDING ENOS TO ANSI( B 16.9 )
r-~I __ __~______-+~ _=~____ _H __-+ S_ E SC ___________ _____________~·tIZ42-; 17 NOS 222215/20 9.2 2" 80
ELBOW (90), STANDARD WEIGHT (SCH 20) LONG RADIUS SEAMLESS BUTT WELDING ENDS CONFORMING TO ASTM (A 234 GR WP 5) ALLOY STEEL (5%CHR+0.5% MO) AND THE ENDS TO ANSI (B 16.9). _
I
r
45. 1~ NOS__-J.__-t--___ /~06.2 1" J 46. 15 NOS 47. 20 NOS
,,d. 20 NOS
49. 10 NOS , I
1208.2 11.1/2 1209.2 2" ,
I ELBOW (45°) (SCH-40) SEAMLESS ALLO--Y- S-T--EE- L--------I
I(5% CHR +1/2%MO ) CONFORMING TO ASTM (A 234 GR WP5), BUTT WELDING ENDS TO ANSI (B.16.9) .
222707/129.2 2" TEE EQUAL ( SCH-40) SEAMLESS ALLOY STEEL (5% CHR +1/2% MO) CONFORMING TO ASTM (A 234 GR WP 5) BUTT WELDING ENDS TO ANSI (B.16.9 )
222710/136.2 . ~~DUCER·· C-=0·-N~C-E-N-T-R,--I C-S-C-H---40--S-E-A-ML-E-S-S-A-L-L-O-Y- ~ STEEL (5% CHR +1/2~MO) CONFORMING TO ASTM ,. ( A 234 GR WP5)BUrt WELDING ENDS TO ANSI (B.16.9)
222712/323.2 ' 3" X 2" I
I IREDUCER CONCENTRIC SCH-40 BUTT WELDI NG ENDS -: TO ANSI (B.16.9) SEAMLESS ALLOY STEEL (5% CHR +1/2%MO) CONFORMING TO ASTM ( A 234 GR WP5)
,_:50_.+--1_6_ 1 NOS
1
~5-1-. r--2 ~·-N-0-S-r-------44 2+,-6-" - -------------------13--.- X-3 ' ' .---~ 52 . 4 NOS 1346.2 I 6" X 4" ~
ISTEEL (5% CHR +1/2%MO)CONFORMING TO ASTM i REDUCER CONCENTRIC ( SCH-80 ) SEAMLESS ALLOY I
i ( A 234 GR VVP 5) BUTT WELDING ENDS TO ANSI (B.16.9) :
53. 11 NOS 222713/513 .2 _2_" _X_1_" ________________--'___________ I
3-6
II . LJ I Y UNIT VOCAS NO DESCRIPTION -~ ---. ---------- --
REDUCER CONCENTRIC SEAMLESS ALLOY STEEL MATERIAL STAINLESS STEEL TO ASTM (A- 403 GR WP 304 ) (NEEDED FOR F 302) BUTT WELDING ENDS TO ANSI (B.16.9)( SCH-80 )
I SIZE I --T-22-9--'5- ~":';"~-~ 900 ~54. 4 NO-S-I -2- 1 3-47-.-2--'-1-=·~-~--- HORT RADIUS STAINLE~~ STEEL
SEAMLESS BUTT WELDING END SCH-40 CONFORMING I I TO ASTM (A- 403 GR WP-321 )AND ANSI (8. 16.9) .
L -55. 3 ' NOS 223006/565.2 3/4"
i 56. 12 NOS 1566.2 1" ---t - - - ---- -
I TEE S/STEEL SCH 40 BUTT WELDING ASTM A 403 GR
I
321-
~--.
NOS 223010/569.2 2" r----ELBOW 45° LR MATERIAL STAINLESS STEEL
-
I I CONFORMING TO SA 403 TP 316 L BUTT WELD
L i ACCO RDING TO ANSI B 16.9 i 58. i 1 I NOS I 223207/011.2 3" SCH 10S
I FLANGES RAISED FACE (R. F ) WELDING NECK (W. N ) , RATING # 150 LBS , MATERIAL FOR LOW - TEMPERATURE SERVICE, TO ASTM (A 350 GR LF 1) , FACED AND DRILLED TO ANSI ( B16.5) . ~ SIZE SCH
------~. -
~9. 14 . NOS 224305/211.2 3" 40 FLANGES RAISED FACE (R.F), WELDING NECK (W.N), RATING # 300 LBS, MATERIAL FOR LOW- TEMPERATURE SERVICE, TO ASTM (A 350 GR LF1), FAC?ED AND DRILLED TO ANSI B 16.5 . - I60. 4 NOS 224306/211.2 3" SCH 40
~ 61. 6 NOS /215.2 6" SCH 40
- ----FLANGES,( R.F.W.N) SCH (40 ) RATING # 150LBS FORGED CARBON STEEL FOR LOW -TEMPERATURE SERVICE, CONFORMING TO ASTM (A 350 GRADE & LF2) & FLANGE ENDS TO ANSI B .16.5
62. 10 I NOS 224319/210.2 3" 63. 2 NOS /216.2 r 10"
----~r[ F-L-A-N-G-E-S-(=R-. ~F.-W-.-N-)S-C-H--(4-0-)-,-R-A-T-IN--G--------
I
# 300LBS FORGED C RBON STEEL FOR LOW ! TEMPERATURE SERVICE, CONFORMING TO ASTM
- I (A 350 G_~ LF 21, FACE & DRILLED TO ANSI ( B .16.5) 64. 59 NOS 224320/128.2 1.1/2" ~ . II NOS 65. 15 1129.2 2"
66. 50 NOS - 1131.2 3" ~ 67. 50 NOS 1132.2 4" I
-FLANGES,# 300 LBS (R.T.J) WELDING NECK SCH 40 FORGED ALLOY STEEL (1.1/4% CHR &1/2%MO ) CONFORMING TO (ASTM A 182 GRADE F11), FACED & DRILLED TO ANSI (B16.5)
SIZE _\ ~CH I68. 9 NOS 224506/335.2 6" ~ .40 . 69.. 6 NOS /369.2 2" 80 j
4-6
I r QTY UNIT VOCAS NO DESCRIPTION --------------~----
FLANGE WELDING NECK TYPE (W. N. R. F ) SCH ( 40 ) , RATING "# 30 LBS, FORGED ALLOY STEEL ( 5% CHR + '/z% MO ) CONFORMING TO ASTM
. { A - 182 GR F 5} , FACED & DRILLED TO ANSI (8 16.5 )
70 .~4 --NOS--'---22-47067266.rl111 - - -- - -
FLANGES RAISE FACE (R.F) 1S0 LBS BLIND FLANGE FORGED ALLOY STEEL (S% CH R +1 /2% MO) TO ASTM (A-182 GR FS) FACED & DRILED TO ANSI (B16.5)
71
I --r-
7'2.-. 3
fIT 3-.
I ~
74. 1
-7S. 1 76. 2
177. 2
78. 12
79. 1 80. 1
81. 12 82 . 12
f--83. 12 84. 8
85. 4 86. 4
, 224709f089.2 2" -IT FLANGES RAISE FACE (R.F) #300 L8 S BLIND FLANGE FORGED ALLOY STEEL (5% CHR +1/2% MO) ASTM (A-182 GR FS) FACED & DRI LED ANSI (B16.S)
I -. NOS 1171.2 3" -
NOS 1176.2 8" ----. - -
FLANGES RING TYPE JOIN (R.T.J) 300 LBS BLIND FORGED ALLOY STEEL (S% CR + % % MO) ASTM (A-182 GR FS) FACED & DRILLED ANSI (B 16.S) I
-NOS 1291 .2 3" ._
I FLANGE (R . F. W. N) SCH (80 ) ALLOY STEEL ( 9%CHR & 1 % MO ) CONFORMING TO ASTM ( A 182 GR F 9 ) , RATING # (300 L8S ) FACE & DRILLED
. TO ANSI (B16.S ) .
-NOS I 224£;06/413.2 4" ~ NOS 1416.2 8" I
RF SLIP ON FLANGE, RATING 150 L8S, MATERIAL I FORGED STAINLESS- STEEL TO ASTM' (A 182 GR F 304) ,
I (18% CR-8% NI) , FACE AND DRILLED TO ANSI (8 16.5) !
NOS 224905/125.2 3/4" I I RF WELDING NECK (W. N) FLANGE SCH 40 , RATING I #150 LBS, MATERIAL FORGED STAINLESS STEEL TO
ASTM (A182 GR F 304) ,(18 % CHR-8% NI ) , FACE AND DRILLED TO AN SI (8 16.5)
NOS 1206.2 1" --FLANGES 150 LBS R.F. SCH 80 WELDING NECK MATERIAL SISTEEL ASTM A-182 ,GR, F-304
. (NEEDED FOR F-302) i
I NOS 1250.2 2.1/2" N.B • -NOS 1255.2 j 6" N.B I
CONCENTRIC REDUCERS (ST. STEEL) TO ASTM (A 403), BUTT WELDING ENDS TO ANSI {B.16.9} . ,
NOS 229905/002.2 6" X 4" SCH 40 WP 316 I NOS 1005 .2 12" X 8" SCH 10 WP 304 -' NOS 22990 5/007.2 10" X 8" SCH 10 WP 304 NOS 1009.2 10"X8"SCH20 WP316
I REDUCERS r.()NT ST.STEEL ASTM A 403
NOS 2299071001.2 2" X 1.1/2" S 180 WP 304 L NOS 1002.2 2" X 1.1/2" SCH 40 WP 304 L I
5-6
- ---------
----------------------------
1 8... . 12 NO S 88 . 12 NOS - ---~- - --<
89. 12 NOS
4 I OS I 229918/017.2 10" SCH 10
ORIGI N: ALL TH E ORIGIN EXCEPT CHINA
-CERTIFICATE OF ORIGIN - MILL CERTIFICATE -DIMENSIONS CHECK -THIRD PARTY INSPECTION CERTIFICATE 1- (LLOYD'S REGISTER) 2- (BUREAU VERITAS) 3- (INTERTEK GLOBAL) 4- (YUV RH ENLAND) ._ 5- (DNV)
6-6
