Embed Size (px)
DESCRIPTION
Mini - The reference system for mould tool manufacturing
Citation preview
Mini
The reference system for mould tool manufacturing
Anniversary
40 years1969-2009
3R-321.5 3R-321.65 3R-321.2-4x90º3R-321.2-4x90º
Midi
3R-321-4x90º
Note: For the entire product range see www.system3r.com
MiniThe ancestor of the reference systems! The introduction of the Mini system in the early 1970s created the basis for efficient electrode production and spark-erosion machining. Electrodes could now be produced mounted on inexpensive holders. Subsequent alignment of the electrodes in the spark-erosion machine was eliminated. The Mini system introduced the precision and flexibility that had until then been absent from spark erosion technology.
The Mini system provides rapid and exact mounting of the electrode holders in hydraulic quick-change chucks. This high change accuracy is achieved thanks to the two chambers of the hydraulic system, which expand uniformly and provide symmetrical locking against the fixed Z reference with angular location.
The Mini system is a “Reverse Reference System”, in which the chuck adapts itself to the electrode holder, which is why all electrode holders must be exactly alike – in diameter, roundness, straightness and hardness – to meet the accuracy requirements.
Even today, the Mini system is probably the most widespread reference system in the world.
• Clamping force – 4000 N
Workpiece/electrode
Mini holder/handle
Chuck
Mini...
… reduces setting-up times.
… gives rapid and precise mounting.
… is suitable for automatic changing with System 3R’s automation program.
Mini holder
Mini holderMachine spindle/
lathe taper
Machine spindle
Spindle chucks Article number Feature
Manual 3R-321.5
Manual 3R-321.65 C-axis, Vernier scale
Manual 3R-321.2-4x90º
Manual 3R-321-4x90º
Lathe chuck Article number Feature
Manual 3R-321.2-4x90º
3R-321.46 3R-321.4 3R-252.1 3R-202 3R-222.2
MacroJunior
3R-443AEC 3R-463/5033 3R-653-S 3R-603.9 3R-653
Mini holder Collets
Midi/machine spindle Mini/machine spindle
Mini chuck
Mini holder
Macro chuck
Mini holder
Machine table Machine table/Wire EDM machine
Table chucks Article number Feature
Manual 3R-321.46 vertical and horizontal
Manual 3R-321.4 vernier scale
Manual wire EDM 3R-252.1 stainless steel
Manual wire EDM 3R-202 stainless steel. Vertical and horizontal
Manual wire EDM 3R-222.2 stainless steel
Chuck adapters Article number Article number
Manual 3R-443AEC Mini MacroJunior 65 mm
Manual 3R-463/5033 Mini MacroJunior 50 mm
Manual 3R-603.9 Macro Mini 90º, rust-resistant
Manual 3R-653 Macro Mini, rust-resistant
Manual 3R-653-S Macro Mini
Rotating spindles Article number Feature
Vertical and horizontal 3R-1.6S
Vertical 3R-1.321-HS tubular electrodes
3R-322/25E 3R-311.33R-322/50S 3R-322/50E 3R-322/100 3R-310EE 3R-13.321 3R-311.4 3R-311.2
workpiece/electrode
Mini chuck
Accessories Article number Feature
Check mandrel 3R-23
Check ruler 3R-314.2
Indicating spindle 3R-3.321-2
Microscope 3R-4.321 x25
Scriber 3R-5.321
Clip 3R-301 angular fixing
Soldering kit 3R-403
Electrode cassette 3R-150/5
Super-vice for wire EDM 3R-213.4 <25 mm
Reference ball for wire EDM 3R-215 Ø16 mm
Adapter plate 3R-601.6 for mounting in Macro, relates to 3R-1.6S
Chuck adapter 90449 Midi Maco
Lathe taper T-XXXX Machine-adapted
Electrode holder Article number Feature
Electrode holder Ø20 mm 3R-322/25E 25 mm
Electrode holder Ø20 mm 3R-322/50S 50 mm
Electrode holder Ø20 mm 3R-322/50E 50 mm. automatic changing
Electrode holder Ø20 mm 3R-322/100 100 mm. automatic changing
Electrode holder 3R-310EE flange Ø50 mm
Electrode holder 3R-13.321 square electrodes
Three-jaw chuck 3R-311.4 Ø0.1 - 3 mm
Collet chuck 3R-311.2 <Ø13 mm, ER20
Collet chuck 3R-311.3 <Ø10 mm, ER 16
Upgrade options:
Midi-Mini adapter – Macro/Miniconversion – Macro/Mini
*
* NOTE: older Ø 20 mm chambers can be reconditioned at the factory
What distinguishes the original from a pirate copy:
Right size of eccentric pin
Right quality and size of O-ring
Right shape and position of gripper slot
All original handles are engraved “3R”
Right hardness
Right diameter and shape
For further information contact System 3R.
Note: Warranty undertakings only apply if genuine System 3R parts have been used.
T-22
95-E
10.
09
Sub
ject
to m
odifi
catio
ns •
Sys
tem
3R
, a m
embe
r of t
he G
eorg
Fis
cher
Gro
up.
ASIA
Far East, China & IndiaSystem 3R Far East Pte.Ltd.6 Harper RoadLeong Huat Building, 01-01SINGAPORE SG-369 674tel +65-6289 4811fax +65-6289 3011e-mail: [email protected]
Shanghai Contact Office tel +86-21 6432 7927fax +86-21 6432 7928e-mail: [email protected]
Beijing Contact Officetel +86-10 8225 1632fax +86-10 8225 1635
Guangdong Contact Officetel +86-769 8162 0628fax +86-769 8162 0638
Malaysia Contact Officetel +60-03 7877 4785fax +60-03 7877 5948
Taiwan Regional Officetel +886-02 2278 3126fax +886-02 2278 3108
Japan & KoreaSystem 3R Japan CO., Ltd.Kaki Building2-5-22, Suido, Bunkyo-kuTOKYO JP-112-0005tel +81-03 5840-7383fax +81-03 5840-8723e-mail: [email protected]
Nagoya Regional Officetel +81-052 774 6250fax +81-052 774 6285
System 3R International ABSorterargatan 1, SE-162 50 VÄLLINGBYtel +46-08 620 20 00, fax +46-08 759 52 34, e-mail: [email protected], www.system3r.com
Combi, Delphin, Dynafix, Locx, LX, Macro, One Minute Set-Up, One System Partner, R2R, System 3R, VDP, WorkMaster, WorkPal, WorkPartner, WorkShopManager, 3HP, 3R, 3Ready-To-Run and 3Refix are registered trademarks of System 3R.
EUROPE
System 3R Europe GmbHWasserweg 19DE-64521, GROSS-GERAUtel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]
Chech Republic & SlovakiaSystem 3R CzechTiskarska 10/257CZ-108 28 PRAHA 10tel +420 234 054 224fax +420 234 054 225e-mail: [email protected]
France & PortugalSystem 3R France56 Boulevard de CourcerinLes Espaces Multiservices 15F-77183 CROISSY BEAUBURGtel +33-01 60 95 90 80fax +33-01 60 37 88 16e-mail: [email protected]
Germany & BeNeLuxSystem 3R DeutschlandWasserweg 19DE-64521, GROSS-GERAUtel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]
Italy & SpainSystem 3R ItaliaVia Ponchielli, 2/4IT-20063 CERNUSCO SUL NAVIGLIO (MI)tel +39 02 92 38 821fax +39 02 92 11 23 19e-mail: [email protected]
ScandinaviaSystem 3R NordicSorterargatan 1SE-162 50 VÄLLINGBYtel +46-08 620 20 00fax +46-08 759 52 34e-mail: [email protected]
Järfälla HärdverkstadElektronikhöjden 8SE-175 43 JÄRFÄLLAtel +46-08 580 125 50fax +46-08 580 126 55e-mail: [email protected]
Switzerland & AustriaSystem 3R Schweiz AGWilerstrasse 98CH-9230 FLAWILtel +41-071 394 13 50fax +41-071 394 13 60e-mail: [email protected]
TurkeySystem 3R TürkiyeAbdi Ipekci Cad. Ozel Idare Is Merk 150/209Bayrampasa 34030 ISTANBULtel +90-212 613 8062-8063fax +90-212 613 8069e-mail: [email protected]
United KingdomSystem 3R UKParadise WayWalsgrave Triangle Coventry, West MidlandsCV2 2ST, United Kingdomtel +44-02476 538653fax +44-02476 538695e-mail: [email protected]
AMERICAS
System 3R USA Inc.Headquarters & Technical Center915 Busse RoadELK GROVE VILLAGE, US-IL 60007tel +1 847 439 4888fax +1 847 439 5099e-mail: [email protected]
Canada & MImobile +1 519 870 8339fax +1 847 439 5099e-mail: [email protected]
AZ, CA, CO, ID, MT, NM, NV, OR, UT, WA, WY & Mexicomobile +1 714 299 4923fax +1 847 439 5099e-mail: [email protected]
IA, MN, ND, NE, SD & Western WImobile +1 612 963 6904fax +1 847 439 5099e-mail: [email protected]
AR, IN, KY, OH, TN, MO, KS, OK & Southern ILmoblie +1 317 694 7508fax +1 847 439 5099e-mail: [email protected]
AL, FL, GA, LA, MS, NC, SC & TXmobile +1 813 326 0125fax +1 847 439 5099e-mail: [email protected]
Nothern IL & Eastern WImobile +1 847 400 6073fax +1 847 439 5099e-mail: [email protected]
NJ, NY & PAmobile +1 201 248 3885fax +1 847 439 5099e-mail: [email protected]
CT, DC, DE, MA, MD, ME, NH, RI, VA, VT & WVmobile +1 201 214 7088fax +1 847 439 5099e-mail: [email protected]
For further information, see www.system3r.com
