SF6 Gas Reclaimers MINI Plus Series II

R

DILO Company, Inc.,11642 Pyramid Drive, Odessa, FL 33556, ( (727) 376–5593, Fax:(727) 372-0277 5/6/04

The Mini Plus is a fully functional portable oil-free SF6 gas-reclaiming cart designed for today’s smaller volume circuit breakers. It has all the features found on larger systems but remains compact and easy to operate. Fast recovery speed, combined with 99.6% gas recovery rate, and up to 230 lb on–board storage capacity (indefinitely extendable) are features that make the MINI Plus Series II the leader in its class.

Applications • SINGLE valve operation • Recover SF6 gas when servicing gas-filled apparatus • Store SF6 in liquid form in on-board cylinders or fill external

cylinders • Purify recovered SF6 gas twice during regular routine. • Evacuate air and moisture from apparatus after servicing • Refill apparatus with reclaimed gas controlling fill pressure • Transfer SF6 between cylinders partial to liquid, liquid to

liquid • Simultaneous execution of functions

Description The Mini Plus Series II incorporates many unique design solutions, which enhance its reclaiming effectiveness and ease of use. Dual compressor design allows for fast parallel recovery until apparatus pressures of 0 psig as well as high recovery efficiency with serial recovery to below 35 mmHg. Unit is functional with only one compressor operating. Low restriction pipes enhance processing times. A custom designed, two-position valve allows the operator to switch between recovery and fill -mode by moving only one valve. The design layout allows the gas compressors to be used during refilling functions. This eliminates the need to keep “spare gas” in storage tanks. Refill pressures are controlled via a high-speed, two-stage regulator reducing risk of total gas loss due to accidental overfilling of apparatus. An optionally available integrated electronic weight scale allows easy monitoring of gas quantity in storage. The scale also turns the processor off when the weight in the storage vessel reaches a pre-determined value. Self-sealing DILO valves eliminate risk of gas contamination during handling. Vacuum pump is independent of the SF6 circuit and can be used simultaneously with all other functions. An electrically operated anti-suckback prevention valves eliminates the risk of oil contamination in case of power or pump failure. The wide wheelbase of the 4-wheeled dolly increases stability when transporting on uneven grounds. Integrated leveling jack allows the unit to be secured and operated in upright position within seconds. Skid handles protect all components against impact and allow safe on and off loading for transportation.

Performance (detailed graphs available on request) Compressor Recovery: 58 lb SF6 gas per hour average recovery rate from 75 psig down to 0

psig. Total SF6 reclamation capability is 99.6%. System Refill: Average refill rate is 90 lb SF6 per hour from 1 torr to 75 psig

MINI Plus SF6 Recovery System Data, Options

R

DILO Company, Inc. 7/24/08

Modules Order Number Price

MINI Plus SF6 recovery system 70 CFH Oil less compressor discharge pressure: 725 psig, up to 60 lb/h max. pressure differential: 1000:1. 4” stainless steel suctioning and discharge gauges. One valve operation, unsupervised operation. 16 ft (5 m.) 3/8” hose with DILO DN 08 couplers on both ends. Includes filter, pressure regulator, space for two storage. cylinders, 8 CFM two stage vacuum pump. Power required: 20 amp, 120 V AC / 60 Hz., single phase.

D-320-R006 height: 58 ¼ ” width: 32 ½ ” depth: 36 ½ ” dry weight: 240 lb.

15,750.00

Storage Cylinder for MINI Plus: Storage cylinders (max. 2 cylinders on board)

25 lb. capacity ALUMINUM DOT approved cylinder tare weight 23 lbs. O.D. 7.25” height 23.5”

65 lb. capacity Aluminum DOT approved cylinder tare weight 48 lbs. O.D. 8” height 48”

N60 N150

280.00

395.00

Accessories & Options: 220V / 50 Hz single phase power supply MP-220 220.00 Vacuum Pump Upgrade upgrade to 14 CFM MP-V14/0.1 2,700.00 Electronic Cylinder Weight Scale to monitor filling of

SF6 cylinders. Integrated into D-320-R004 frame With adjustable max.weight setpoint, includes weighing system and cylinder holding system

D-301-R002 1,540.00

Adapter Kit DN8 Includes adapters from DN8 to the following: 3/8” Male NPT; 3/8” Female JIC; ¼” Female JIC; Siemens Aeroquip/SPS; ABB Malmquist; DILO DN20; SF6 Cylinder; & waterproof case with extra storage compartments (analyzer kit pictured on right)

Adapter Kit-DN8 width: 21.2” (538 mm.) height: 16” (406 mm.) depth: 8.3” (211 mm.) wt.: 20 lb. (9.07 kg.)

1,750.00

Spare & Replacement Parts: Pre Filter Unit recommended to process contaminated SF6

with DILO DN08 self sealing couplers (when ordering also order additional 5 ft service hose and filter core)

PF-C484-P 828.00

Pre Filter cores Moisture and decomposition Choose one: Oil removal High moisture capacity

RC-4864 RC-4864-HH RCW-48

40.00 56.00 62.00

Additional 5 ft Service Hose (needed for use with PF-C484-P), 5 ft long DN08 service hose with DILO DN08 couplers

D-155-R005 242.00

Replacement Core for pre filter unit RC-4864 40.00 Reusable Shipping/ Storage Crate 440 lbs (empty)

built with 1” welded frame and 2” U profile floor, ramps to roll unit in and out of crate, hinged door, resin plywood cover

MP-RC 3,450

External Cylinder Weight Scale designed to allow user to roll cylinders onto platform without lifting. Battery operated or 120/220 VAC, range 0-330 lbs, L: 15” W: 17” H: 31” weight 44 lbs

K091R37 2,280

Prices shown are valid per piece in US $, Ex. Works Odessa, FL, unpacked, no taxes included. For a firm quoation please contact DILO Company, Inc.