Upload
truongkien
View
216
Download
0
Embed Size (px)
Citation preview
TECHNICAL DATA SHEET
Miller PipePro Auto XCS
Product: XCS
Pg. 2/5
Digital Automatic Welding System specific for weld the root pass without backing support in the pipeline.
Note: the system needs to be feed with an electric generator having minimum output power of 6kW.
System Composed by:
CONTROL BOX
The Box contain the two Power Source Miller PipePro 400XC-CE,
Electric panel (RAD), Dual welding gas mixer for Argon –CO2, one
Display for visualize the welding parameters.
Technical data:
Length (mm): 1000
Width (mm): 1000
Height: (mm): 1200
Weight (Kg): 340 with Power Source
Feeding voltage: 48V Three phase (220V Mono phase for AC )
TECHNICAL DATA SHEET
Miller PipePro Auto XCS
Product: XCS
Pg. 3/5
WELDING BUG:
N°2 Welding bug (NO Right and LEFT bug) equipped with standard
welding torches and Standard welding wire spool (15 Kg.).
Technical data:
Length (mm): 360
Width (mm): 360
Height (mm): 330
Weight (Kg): 25 with 2,5 Kg spool – 22 with 15 Kg spool
MILLER PIPEPRO 400 XC-CE
N°2 Miller PipePro400XC-CE with Adv-Pulse program (Advanced Pulse).
The Adv-Pulse process can guarantee constant root penetration, low
spatter level and High Speed without Copper Back support.
Technical data:
Length (mm): 381
Width (mm): 705
Height (mm): 464
Weight (Kg): 57
Welding processes: Adv-Pulse, Mig, RMD, Pulsed Mig, Flux Cored, Tig,
Multi-process Welding
SPOOL HOLDER WITH MONITOR
N°2 Spool Holder complete with monitor for visualize and change the
welding parameters during the weld.
Technical data:
Length (mm): 450
Width (mm): 320
Height (mm): 555
Weight (Kg): 5 (Without spool)
TECHNICAL DATA SHEET
Miller PipePro Auto XCS
Product: XCS
Pg. 4/5
COMUNICATION AND SUPERVISOR MODULE
The module SCS is used by Miller PipePro® Auto XCS system to supervise and
to communicate.
It is located into the welding cabin and it is fixed on an isolating plate. It supplies
fast connections between all consumptions that have to enter in the welding
cabin.
Technical data:
Length (mm): 450
Width (mm): 320
Height (mm): 555
Weight (Kg): 5 (Without spool)
SET of CONTROL and POWER CABLES
Set of Control and Power Cables are composed with:
N°4 Power cables (+ and -) 95mmq – L=25mt
N°4 Power cables (+ and -) 95mmq – L=7.5mt
N°1 Control Cable L=25mt
N°2 Control Cables L=7.5mt
N°2 Cables for Monitor
N°1 Cables for Emergency
N°2 Pipe for Mix Gas
N°2 Pipe for Pneumatic
PRESSURE REDUCER FOR ARGON AND CO2
Pressure reducer group composed by: manifold to connects at the same
time 4 gas bottles, one way valves, high pressure tap, pre heater (for CO2
only) pressure reducer.
Technical data:
Inlet pressure: 300 bar Max.
Outlet pressure: 15 Bar Max.
TECHNICAL DATA SHEET
Miller PipePro Auto XCS
Product: XCS
Pg. 5/5
TRANSFORMER 380/48 V
Transformer 380V – 48V Three-phase, with voltmeter on output and
plugs for auxiliary devices 220V.
Technical Data:
Length (mm): 380
Width (mm): 610
Height (mm): 650
Weight (Kg): 75
Voltage: Input 380V 3-Phase – Output 48V 3-Phase
Power: 6KVA
Plugs for auxiliary devices: 220V
All sockets are provided of adequate circuit breaker according to the
specific loads.