Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
1
Miller, Loren@Waterboards
From: Ghoram, Whitney@WaterboardsSent: Tuesday, August 11, 2015 9:52 AMTo: '[email protected]'Cc: Walsh, Laurie@Waterboards; [email protected]: Consolidated Graphics- Ruth Press: Recertification RequirementsAttachments: IGP-LRP_Registration.doc; IGP-RecertificationGuidanceJune2015.pdf; IGP-
new_user_registration.pdf
Importance: High
Ms. Richardson, (WDID 9 37I016194) On August 6, 2015, I visited the Ruth Press facility located at 3553 California Street, San Diego 92101 (Ruth Press signage still on the building). I could not gain access through the locked gate but found through phone calls that Ruth Press is now located at 955 Gateway Center Way, San Diego 92102. Due to Ruth Press signage still at the California Street location, I assume that Ruth Press is still operating at that location in some capacity. The purpose of my visit was to make contact with a Ruth Press representative and request that Ruth Press recertify its enrollment under the new Industrial Storm Water Permit (Order No. 2014-0057-DWQ) via SMARTS as required by the permit. Please “recertify” Ruth Press in SMARTS for enrollment under the new Industrial Storm Water Permit (Order No. 2014-0057-DWQ) no later than August 14, 2015. You will need the facility WDID number 9 37I016194 and Secret Code Number (SCN: AVJE87392) to recertify in SMARTS. In addition you are required to upload an updated SWPPP (storm Water Pollution Prevention Plan) and site map to SMARTS no later than August 14, 2015. In addition, since Ruth Press has opened a new location, after you recertify the existing WDID for the California Street location, Ruth Press is required to file an NOI (Notice of Intent) to enroll under the Industrial Storm Water Permit, or file an NEC (No Exposure Certification) for the Gateway Center Way location. If Ruth press intends to completely vacate the California Street location, a Notice of Termination (NOT) will be required for that location. See attached recertification/registration instructions, and links below to the permit, SMARTS log in, NEC, and workshop videos about the new permit and recertification: Storm Water Permit Web Page: http://www.waterboards.ca.gov/water_issues/programs/stormwater/industrial.shtml SMARTS Log In Web Page: https://smarts.waterboards.ca.gov/smarts/faces/SwSmartsLogin.jsp Here is the link to the Industrial Storm Water Permit toolbox web page (where there is a brochure on NEC requirements and instructions for filing an NOI): http://www.waterboards.ca.gov/water_issues/programs/stormwater/toolbox.shtml Link to Industrial Storm Water Permit Workshop & Presentations Video’s: http://www.waterboards.ca.gov/water_issues/programs/stormwater/workshops.shtml Let me know if you have any questions. Thank you for your time and cooperation. Whitney
2
Ms. Whitney J. Ghoram Sanitary Engineering Associate Storm Water Management Unit San Diego Regional Water Quality Control Board-Region 9 2375 Northside Drive, Suite 100 San Diego, CA 92108 E-MAIL ADDRESS: [email protected] Phone: (619) 521-8040 Website: www.waterboards.ca.gov/sandiego Storm Water web page: http://www.waterboards.ca.gov/water_issues/programs/stormwater/industrial.shtml
Legally Responsible Person SMARTS Registration
The Storm Water Multi–Application & Report Tracking System (SMARTS) is now available for dischargers to create a user account online and submit Annual Report(s) electronically. These instructions are for registration of SMARTS Legally Responsible Person. You must be the Legally Responsible Person (LRP) to submit and certify a SMARTS report on the behalf of a facility. In the simplest terms, the LRP is the individual that certifies the Notice of Intent (NOI) and is responsible for reviewing, validating and certifying the annual report for accuracy and correctness before it is submitted. The LRP may assign rights to submit and certify the annual report to an Approved Signatory. An approved signatory maybe other employees designated authority to certify documents on behalf of the LRP. An Approved Signatory cannot be a contractor or consultant. A Data Submitter is any individual authorized by the LRP to enter data into SMARTS on behalf of the LRP. A data submitter may be other employees, contractors, labs, etc. A data submitter cannot certify the Annual Report. To register as an LRP and identify Approved Signatory(ies) or Data Submitter(s), you must have a user account. Upon receipt of this Authorization Form, Water Board staff will email instructions on how to register for SMARTS, a Secret Code Number (SCN), how to link WDID number(s), Approved Signatories or Data Submitters to your account. One authorization form per WDID number is required. Mail the authorization form to:
SMARTS Registration P.O. Box 1977 Sacramento, CA 95812
If you have any questions please contact us at 1-866-563-3107 or email [email protected].
SMARTS LRP AUTHORIZATION FORM Operator Information (please print clearly) Name: _____________________________________________________
Address: ___________________________________________________
City, State, Zip: ______________________________________________
Phone Number: _____________________________________________
FAX Number: _______________________________________________
E-Mail Address: _____________________________________________ The Water Board will use this email address to send registration information Facility Information (please print clearly)
WDID: _____________________________________________________
Name: _____________________________________________________
Address: ___________________________________________________
City, State, Zip: ______________________________________________
APPROVED SIGNAOTRY AND DATA SUBMITTER(S) IDENTIFICATION
Approved Signatory (please print clearly) 1. Approved Signatory
Person Name: ____________________________________________________ Email Address: ____________________________________________________
2. Approved Signatory Person Name: ____________________________________________________ Email Address: ____________________________________________________
Data Submitter Information (please print clearly) 1. Data Submitter
Person Name: ____________________________________________________ Email Address: ____________________________________________________
2. Data Submitter
Person Name: ____________________________________________________ Email Address: ____________________________________________________
3. Data Submitter
Person Name: ____________________________________________________ Email Address: ____________________________________________________
PREFIX, FIRST, MIDDLE, LAST,
4. Data Submitter Person Name: ____________________________________________________ Email Address: ____________________________________________________
5. Data Submitter Person Name: ____________________________________________________ Email Address: ____________________________________________________
6. Data Submitter Person Name: ____________________________________________________ Email Address: ____________________________________________________
Legally Responsible Person Signature:
I certify that I am the legally authorized representative for the facility listed below. My signature on this form also certifies that my SMARTS user ID and password constitute my electronic signature and any information I indicate I am electronically certifying contains my signature. I understand that I am legally bound, obligated, or responsible by use of my electronic signature as much as by a hand-written signature. I agree, on behalf of myself and the facility identified above to be bound by its terms.
I agree to protect my electronic signature from unauthorized use, and I will contact the Water Board, within 24-hours of discovery, if I suspect that my electronic signature has been lost, stolen, or otherwise compromised. I certify my electronic signature is for my own use, will keep it confidential, and will not delegate or share with any other person.
Printed Name: ________________________ Signed: _____________________________ Date: _______________ Mail completed form to: SMARTS Registration P.O. Box 1977 Sacramento, CA 95812
New User Registration ‐ 1/14/2010 Page 1
SMARTS New User Registration
The Storm Water Multiple Application & Report Tracking System (SMARTS) was developed to provide a platform where dischargers, regulators, and the public can enter, regulate and view storm water data including NOIs, NOTs, compliance, and monitoring data associated with the Storm Water General Permits To submit Permit Registration Documents, Annual Reports and Notice of Terminations in SMARTS, users must register for an account. This guide assists new users on how to create a User ID & password to access SMARTS. Public Reports are available to the General Public to search and review Storm Water data and does not require a User account to access the information. If you have any questions please contact the Storm Water help desk at [email protected] or 1-866-563-3107.
New User Registration ‐ 1/14/2010 Page 2
Instructions
Objectives Create a new SMARTS user account. Prerequisites Must have access to the internet. Best used in Internet Explorer.
New User Registration
1. Open Internet Explorer and visit https://smarts.waterboards.ca.gov/ 2. Click on the “Sign Up” button
NOTE: This screen provides notifications regarding system maintenance times and/or other important information about SMARTS.
3. Select the user account type you want to establish
a. Legally Responsible Person b. Approved Signatory c. Data Entry Person NOTE: Click the “LRP, DEP and AS” User link to view the definitions of User Types.
New User Registration ‐ 1/14/2010 Page 3
4. Enter your Account Details
The account must identify a specific person, NOT an agency and each person should create a separate account. Fields with the red asterisks are mandatory. a. Enter First, Middle & Last Name b. Enter Email address
i. SMARTS will email temporary password to this address c. Enter User ID
i. Must be between 7 - 16 characters ii. Click the “Check for Availability” button to verify User is
available.
5. Enter the Business/Agency Details
a. Select Business Type a. Private Business b. Private Individual c. Federal Agency d. State Agency e. County Agency f. City Agency
New User Registration ‐ 1/14/2010 Page 4
g. Special District h. Government Agency Combination i. Other
b. Enter Business Name c. Enter Business Address d. Select Country e. Enter Federal Tax ID
a. This is only required for “Private Business” b. Other Business Types leave this field blank. Do not Enter
a Social Security Number.
6. Select the Identification Verification Security Questions
These questions are asked to reset your password if you misplace it. a. Select the first Security Question & enter answer b. Select a different Security Question for the second question.
7. Type the Server Security Letters and Complete Registration
NOTE: The security image is case sensitive
a. Enter the letters from the security Image
i. The letters are case sensitive b. Check the Certification Box c. Click on “Continue to Complete Registration”
New User Registration ‐ 1/14/2010 Page 5
8. You will get an on-screen acknowledgement that your registration
was successful 9. Verification Email
SMARTS will mail an acknowledgement of complete User Account Registration. This email contains the User ID, Temporary Password & URL (website) to log into.
10. Go to https://smarts.waterboards.ca.gov a. Log into the system with the User ID and the temporary password.
i. Temporary password is case specific
11. Change Temporary Password
The first time accessing SMARTS you will be requested to change the temporary password.
a. Enter the Old Password (Temporary Password Sent) b. Enter a new Password
i. The new password must be 7 – 12 characters and contain a capital letter as well as a numeric digit.
c. Confirm the new Password d. Click Update to submit the change e. An email from SMARTS to verify the change of password
will be sent.
New User Registration ‐ 1/14/2010 Page 6
f. Once the password is changed you are directed to the main menu
NOTE: If you registered as an Approved Signatory or Data Entry Person you
must be linked to the LRP account before you can access records. (See How to Link Users Guide for instructions).
1 Order 2014-0057-DWQ
2 State Water Board Order 97-03-DWQ
Storm Water Multiple Application and Report Tracking System (SMARTS)
Recertification Guidance
Who needs to recertify a Notice of Intent?
On April 1, 2014, the State Water Board adopted a new statewide General Permit for
Storm Water Discharges Associated with Industrial Activities1 (referred to as the “new
Industrial General Permit”), which takes effect on July 1, 2015 and replaces the existing
Industrial General Permit. The new Industrial General Permit is available at:
http://www.waterboards.ca.gov/water_issues/programs/stormwater/industrial.shtml.
As a facility operator (also referred to as “Discharger”), compliance with the new
Industrial General Permit is required. Dischargers currently enrolled in the existing
General Permit for Discharges of Storm Water Associated with Industrial Activity2
(Industrial General Permit), with an active Waste Discharge Identification (WDID)
number are required to obtain coverage under the new Industrial General Permit by
recertifying coverage as described below.
Instructions
The system performs best in Internet Explorer versions 9 or 10. If you do not have
Internet Explorer, you may encounter system glitches; please alert staff to any that may
arise and staff will try to troubleshoot the issue.
*Note: The designated Legally Responsible Person (LRP) must complete the
recertification process (definition: 40CFR122.22)*
1. Go to the SMARTS login
https://smarts.waterboards.ca.gov/smarts/faces/SwSmartsLogin.jsp
2. Select the Industrial Permit Recertification Click here link.
3. Do you have a SMARTS user ID? (The WDID and SCN are not your user ID or
password). Please note: user accounts are non-transferable. If you have not set
up a personal user account, please create a new user account at this time by
selecting NO.
a. If you have already created a SMARTS account, select YES. The system
will prompt you to login to your account (If you forgot your user ID or
password, please contact the SMARTS Helpdesk).
1 Order 2014-0057-DWQ
2 State Water Board Order 97-03-DWQ
b. If you have never created a SMARTS account, select NO. Please
complete the user registration and log back in with the temporary
password to complete the recertification.
4. Once you have logged in, please enter your WDID and SCN. (The first letter of
the WDID is the letter ‘I’ and not the number ‘1’.)
5. Please update your user account information by completing the fields on the NOI.
Please be sure to correct and/or complete the all of the fields that are followed by
a red asterisk.
6. Scroll to the bottom of the page, answer the security question and click certify. (If
you do not see the certify button, you are not registered as an LRP. Please
contact staff with questions.)
7. If everything is complete, you will see a confirmation screen. Please print your
Electronic Authorization Form and send this Original form to our office with a wet
signature. (If you have any issues downloading the form, please open the file
with Adobe or save it as a .pdf. If you are still unable to find the form, please be
sure that you are utilizing Internet Explorer.)
8. You may also link Duly Authorized Representatives (Approved Signatories) or
Data Entry persons to the WDID. Select the Help link at the top of the page when
logged into SMARTS to access the on-line Help Guides. Select
Managing/Linking Users for screen shots and detailed instructions of how to
complete the linking process. Please have the user ID of the individual that you
wish to link available before you begin.
9. To confirm you have re-certified, you may call the SMARTS Helpdesk OR from
ANY PAGE in the SMARTS system, find the “Navigate To:” bar at the top of your
screen. Click Main Menu. On the left hand side, click “Industrial General Permit”.
Click the WDID# to open the NOI and find the Certified Date under the Status of
your permit at the top of the page. If the date is after January 1st of this year, you
have successfully recertified.
10. Lastly, Step 2 of the Recertification process is to upload your updated SWPPP
and Site Map before the July 1st deadline. Anyone linked to the facility/WDID#
can perform this task. You will do this under the Attachments tab on your NOI.
1 Order 2014-0057-DWQ
2 State Water Board Order 97-03-DWQ
If you have any questions or concerns please contact the SMARTS Helpdesk @ 1-866-
563-3107.
SMARTS database link:
https://smarts.waterboards.ca.gov/smarts/faces/SwSmartsLogin.jsp