ROAD BUILDINGEQUIPMENT

AN INTERNATIONAL DISTRIBUTOR OF ROAD BUILDING EQUIPMENT

AVAILABLE MODELS

Stationary & mobile- Continuous type

Model DM-25-Ouput Capacity 20-30 TPHModel DM-40-Output Capacity 40-60 TPHModel DM-60-Output Capacity 60-90 TPHModel DM-90-Output Capacity 90-120 TPH

High capacities and customized configurations can be offered on request.

• Simple yet rugged design

• Easy & use-friendly operation

• Fuel efficiant

• Low power consumption

• Low operating cost

DRUM INTERNAL FLIGHT ARRANGEMENTUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

DRUM INTERNAL FLIGHT ARRANGEMENTUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

SLINGER CONVEYERUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

SLINGER CONVEYERUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

CONTROL PANEL UNITSUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

CONTROL PANEL UNITSUm quate mod tat nulputat. Ut aliquipis

enibh exero odosum dio odolobor

CAPIOUS offers Continuous type Parallel flow Asphalt Drum Mix Plant for Road Construction Industry.

CAPIUS Asphalt Drum Mix Plants are available in different Models with output capacities ranging from 40 TPH to 120 TPH. (Higher ca-pacity plants can be offered on request.)

Output Capacity of the Asphalt Drum Mix Plant is subject to the Mois-ture content in the aggregates, output hot mix temperature, dust con-tent in aggregates and job mix, normal ambient temperature and plant site altitude.

Asphalt Drum Mix Plant Generally consists of :

A. Cold Aggregate Four Bin FeederB. Single Deck Vibratory Screen for oversized material removal

C. Slinger (Cold) ConveyorD. Dryer Auto Burner

E. Drying Cum Mixing Thermodrum with Dust CollectorF. Load out conveyor with Gob hopper

G. Asphalt TankH. Mineral Filler Unit

I. Centralized Control Panel with insulated Cabin

J. Fuel Storage TankK. Pollution Control Unit

(Optional)

A. FOUR BIN FEEDER: The Cold Aggregate Feeder consists of Four Bins. Self relieving bin walls with proper slope ensure constant discharge of aggre-gate without bridge forming. Self relieving bottom openings of the bins with optimum area avoid interlocking. One bin meant for fines or dust is fitted with vibratory motor to ensure the free flow of material. Each bin is equipped with an adjustable opening door that determines the discharge quantity for the ma-terials capacity in outlet, as a function of specific weight of materials. Width of each bin is compatible with the width of the loader bucket.

The material from each bin is drawn out by means of extracting conveyor driven by adjustable variable speed geared motor, that enables to increase or decrease the material output as per the job mix formula requirements. It is also possible to increase or decrease the total capacity without varying the preset settings by means of master control. The material from the each bin is discharged into gathering belt driven by con-stant speed A.C. geared motor. Electronic load cell is fitted which continuously weighs the total output from the four bin feeder unit.

B. SINGLE DECK VIBRATORY SCREEN: Single deck vibratory screen 40 mm is fitted at the end of Gathering conveyor for removal of oversized material.

C. SLINGER (COLD) CONVEYOR: Separate detachable Slinger Conveyor is provided to transfer the aggregates received from the vibratory screen to feed into the Thermo-drum.

Slinger Conveyor is driven by constant speed A.C. Geared Motor.

The rigid frame of Conveyor is fabricated from appropriate size of Channel and the Conveyor belt is supported by uniformly spaced Idler Roller stands. Any sagging on the return travel of the belt is also taken care-of by Idler Roller.

D. DRYER BURNER: Thermo-drum Burner is the heart of the entire system

and hence its efficiency, ease of serviceability etc. are most important factors. The Burner is fully automatic and two stages (High & Low) pressure jet type system is capable to reduce the moisture up to 0.5 % and achieve 180 deg. Celsius for aggregate.

This burner is suitable to use LDO / Diesel as fuel and is fitted with remote control system to detect flame failure and have electric spark ignition system.

The temperature is controlled through thermostatic control device to operate the plant in desired temperature range. The nozzle system is so designed that the nozzle can be cleaned during running condition hence nil downtime for nozzle cleaning.

E. DRYER CUM MIXING THERMODRUM WITH DUST COLLECTOR: The Thermo-drum or Drier cum Mixture unit is long rotating cylindrical drum. It is mounted on sturdy and robust steel structure fabricated from Girders and Channels. The Drum is driven by friction drive supported by 4 nos. of Trunnion Rollers running on heavy duty Bearings. Three nos. Rollers mounted on thrust bearing supports the Guide ring taking care-of the down hill thrust produced due to the Degree provided to the Thermo-drum.

Flame Guard is provided in the Thermo-drum to restrict the Burner flame to reach up to the mixing zone. This Flame Guard divides the Thermo-drum into two zones viz.

1) Heating + Drying zone 2) Mixing zone

The specially designed thick ̀ J’ type + ̀ W’ type comb lifting flights have been bolted in both the zones in the zigzag / straight pattern which creates a dense veils of aggregate in front of burner flame, uniformly heats the aggregates and gives best mixing.

CG938H/CG958H Internationally Certified / Overseas Well-known

Passes EU Safety Certification (CE) by Group TÜV Rheinland Berlin Brandenburg.

Equipped with original USA Cummins QSB 6.7 engine which meets Euro-pean Emission Stage III/EPA Tier III standard. The machine can generate aggressive power with very low fuel consumption.

Many advanced technologies employed in these models, including full hy-draulic power steering system with flow load-sensing, single joystick con-trolling dual-pump flow-converging working hydraulic system, together with boom lifting limitation & bucket auto-balancing functions. All these

provide easier control and higher efficiency.

Noise level in cabin and noise radiation level of entire machine meets the requirement of EU Noise Emission Directive 2001/14/EC, reduces opera-tor’s tiredness, and imporves operation efficiency.

Powerful loading capacity and outstanding stability comes from the elec-tro-hydraulic ZF transmission with four forward speed & three backward speed and integrated wet drive axles.

A series of advanced facilities are equipped, such as pilot locking device, ROPS/FOPS cabin, emergency steering system, etc.

Equipped with original USA Cummins QSB 6.7 engine which meets Euro-pean Emission Stage III/EPA Tier III standard. The machine can generate aggressive power with very low fuel consumption.

Many advanced technologies employed in these models, including full hy-draulic power steering system with flow load-sensing, single joystick con-trolling dual-pump flow-converging working hydraulic system, together with boom lifting limitation & bucket auto-balancing functions. All these provide easier control and higher efficiency.

Noise level in cabin and noise radiation level of entire machine meets the requirement of EU Noise Emission Directive 2001/14/EC, reduces opera-tor’s tiredness, and imporves operation efficiency.

Powerful loading capacity and outstanding stability comes from the elec-tro-hydraulic ZF transmission with four forward speed & three backward speed and integrated wet drive axles.

A series of advanced facilities are equipped, such as pilot locking device,

ROPS/FOPS cabin, emergency steering system, etc.

Many advanced technologies employed in these models, including full hy-draulic power steering system with flow load-sensing, single joystick con-trolling dual-pump flow-converging working hydraulic system, together with boom lifting limitation & bucket auto-balancing functions. All these provide easier control and higher efficiency.

Noise level in cabin and noise radiation level of entire machine meets the requirement of EU Noise Emission Directive 2001/14/EC, reduces opera-tor’s tiredness, and imporves operation efficiency.

Powerful loading capacity and outstanding stability comes from the elec-tro-hydraulic ZF transmission with four forward speed & three backward speed and integrated wet drive axles.

A series of advanced facilities are equipped, such as pilot locking device, ROPS/FOPS cabin, emergency steering system, etc.

Wheel Loader ModelEngine ModelRated Power/Rated Revolution (kW/R/min)Rated Load Weight (t)Max. Dump Clearance (45º Discharge) (mm)Dump Reach (mm) (Max. Dump Clearance)Max. Forward Speed (km/h)Min. Turning Radius (mm)Action Time of Working Device(s)Rated Bucket Capacity (m3)Tradition Force (kN)Overall Size (L*W*H) (mm)Operating Weight (t)Wheelbase (mm)

CG938HCummins QSB6.7

119/22003.8

294992334

52009.62.1119

7330x2470x330012.52900

Operating Weight (kg)

Diesel Engine

Overall Dimensions (mm)

Wheelbase (mm)

Tread Width (mm)

Steering System

Front AxleRear AxleTotal Weight

ModelRate Power (kW/HP)Rated Revolution (r/min)

Standard L x W x HWith Optional L x W x H

Front Axel to Rear AxelMiddle Wheel to Rear Axel

Max. Front Wheel Steering AngleMax. Articulated Wheel BaseMin. Turning Radius (mm)

44801152016000

QSB6.7164/223

2200

9090x2600x36209720x2600x3620

62101550

2150

+- 45º

+- 20º

8400

MOLD BOARD

Length (mm/ft)

Height (Arched Length) (mm)

Max. Tilt Angle

Rotating Angle

Cutting Angle Adjusting Range

Max. Lift Height above Ground (mm)

Max. Digging Depth under Ground (mm)

Max. Shoulder Reach (Left/Right) (mm)

3960/13

650

90º

360º

42º~73º

410

440

1440/2090

MG1320HCheng Gong MG1320H motor grader has passed EU Safety Certifica-tion (CE) by Group TÜV Rheinland Berlin Brandenburg. The machine adopts advanced technology and creative design. It is equipped with ZF electro-hydraulic shifting transmission with 6 forward 3 rear gear position, full enclosed cabin with ROPS/FOPS, emergency steering system, and electro-monitor. The MG1320H, a perfect com-bination of excellent performance and modern aesthetic feeling brings smooth operation experience.

CG958HCummins QSB6.7

164/22005

31961039

3664009.83.1180

8180x3000x354018.43360

Telephone +1-305-468-8787FAX +1-305-513-8483Email sales@mmpas.comPhysical address 6452 N.W. 77th Court Miami, Florida 33166

MISSIONTo provide the most professional machinery and service available in our industry to keep your company moving forward!

ABOUT USMillennium Machinery was established at the turn of the century with the goal of selling the best products, for the best price, in the best time. Our knowledgeable staff is ready, willing and eager to assist you with your heavy equipment and parts needs.

Our firm sold millions of dollars last year in parts and machinery to customers around the world. In our area we have inspected count-less machinery as well as bought, sold and repaired the same.

WARRANTYTo provide the most professional machinery and service available in our industry to keep your company moving forward! To provide the most professional machinery and service available in our industry to keep your company moving forward! To provide the most profes-sional machinery and service available in our industry to keep your company moving forward! To provide the most professional machin-ery and service available in our industry to keep your company mov-ing forward! To provide the most professional machinery and service available in our industry to keep your company moving forward! To provide the most professional machinery and service available in our

industry to keep your company moving forward!