Mil-Spec Pyrotechnics Catalog · Surface Trip Flare M49-A1 Surface Trip Flare M49-A1 Surface Trip Flare is used for illuminating encampment perimeters or as a booby trap signal. The

MIL-SPECINDUSTRIES

PYROTECHNICS CAPABILITIES

MIL-SPEC INDUSTRIES has a joint venture production facility to enhance and grow the technology

and production of special pyrotechnic devices. We specialize in providing difficult-to-produce

pyrotechnic compositions. The facility is situated on 78 acres of land, and consists of specially

designed buildings with reinforced structures. Additionally, the production facility includes explosive

storage bunkers.

We offer a wide variety of explosive and pyrotechnic compositions in powder, free-flowing granular, and pellet forms.

Delay compositions include Manganese, Tungsten, Zirconium/Nickel and Boron/Barium Chromate formulations. Burning

rates range from 0.025 to 42 seconds per inch.

Ignition Compositions include A-1A Gasless Ignition Powder, MTV Boron/Barium

Chromate and Boron Potassium Nitrate (BKNO3). Other standard compositions include, but

not limited to various tracer compositions and others developed to customer specifications.

Many other materials are pelletized, including PBXN-5, Black Powder and various RDX

compositions. Assemblies and loaded devices are also part of our capabilities and product

line. They include Delay Cartridges, Tracers, Boosters, Leads, Fuzes, Explosive Fittings,

Igniters, Rocket Igniters, and Components for consumable ammunition.

Loading and Assembly capability ranges from small quantities of special development units to a million or more

production units, manufactured under ISO 9001:2008 and SPC controls.

Pelleting Presses can produce pellets in many configurations with diameters from 1/16 to 3 ½ inches (1.58 to 88.9 mm).

Quality Assurance is our 1st priority. Our offered pyrotechnic materials have demonstrated specific advantages over those

processed solely to U.S. military specifications. They include:

∙ Improved flow characteristics and integrity of mix ∙ Superior properties of the consolidated material

∙ More consistency ∙ Better batch-to-batch reproducibility ∙ Ease and versatility of loading

POWDERS PELLETS 40MM STAR CLUSTERS SMOKE&ILLUMINATION SIGNAL

DELAY COMPOSITIONS HIGH EXPLOSIVE COMPOSITIONS M585, M664 & M663 MK124

TRIP FLARE POINT DETONATING FUZE 40MM PARACHUTE ASSY 40MM PRACTICE TRAINING FLASH BANG

M49A1 M505A3 M662, M661, M583A1 CARTRIDGE M781 MK155

e-mail: [email protected]

http://www.mil-spec-industries.com

42 Herb Hill Road • Glen Cove, NY 11542

Tel: (516) 625-5787 • Fax: (516) 625-0988

Mil-Spec Industries specializes in providing difficult-to-produce pyrotechnic compositions in powder, granular and pellet form. In-house pelletizing facilities can support rates of up to 200,000 per day.

Variations – Mil-Spec Industries has the research and development capabilities to modify existing delay, tracer, ignition and other pyrotechnic compositions, or create new formulations. Many pyrotechnic and explosive compositions are available in pellet form. Sizes range from 1/16 inch to 3-1/2 inches (1.58 to 88.9 millimeters). Configurations include cylindrical, bi-convex, cored and specialty shapes (kidney, triangular, notched, etc.).

Configurations can be modified to meet specific customer requirements. Characteristics – Characteristics are listed for just a few of the compositions available. Two categories are described - delay and ignition; they are indicative of the range of formulations. For more information, contact a Mil-Spec representative.

http://www.mil-spec-industries.com/




Tel: (516) 625-5787 • Fax: (516) 625-0988

*Specifications are subject to change without notice.





Tel: (516) 625-5787 • Fax: (516) 625-0988


M505A3

Point Detonating Fuze Assembly

M505A3

Point Detonating Fuze Assembly

M505A3 Fuze Assembly is a mechanical point detonating super-quick fuze for 20MM and

25MM HE, HEI, & HEIT ammunition and is predominantly used against light ground targets

and air-to-air engagements. The initiating explosive element for the M505A3 Fuze consists of a

M57A1 Stab Detonator, sealed and staked within a Rotor Ball type S&A Device and restrained

in a safe position by a C-shaped Detent Spring engaged in the shoulder of the Rotor Ball. The

output energy of the M505A3 Fuze is derived from a Booster Assembly sealed and torqued in

the aft end of the fuze.





Tel: (516) 625-5787 • Fax: (516) 625-0988






Tel: (516) 625-5787 • Fax: (516) 625-0988


40 MM Parachute Assemblies

40 MM

Parachute Assemblies

Approximately 2 seconds after firing, the delay element ignites the ejection

charge/candle. The ignition charge ignites the illumination candle canister, and

the ejection charge ejects the parachute/candle assembly out the front end of

the projectile. The parachute deploys upon ejection and provides the visual

light for approximately 45 seconds while descending.

M583A1 White Star M662 Red Star M661 Green Star XM992 Infrared (not shown)





Tel: (516) 625-5787 • Fax: (516) 625-0988






Tel: (516) 625-5787 • Fax: (516) 625-0988


40 MM Star Clusters

40 MM

Star Clusters

M585 White Star Cluster has a white plastic dome with a raised “W” to

indicate the flash color. In addition there are five raised dots on each plastic

dome indicating cluster signal. M664 Red Star has a raised “R” for red, and

the M663 Green Star Cluster has a raised “G” for green. The clusters emit a

luminosity of 30,000 candlepower and reach an altitude of 500-700 feet.

The burn time for the clusters is approximately four to six seconds.

M585 WHITE STAR CLUSTER M663 GREEN STAR CLUSTER M664 RED STAR CLUSTER

M664 RED STAR CLUSTER I.D. # UN0312 SHIP ID: Cartridge Signal UN0312

M663 GREEN STAR CLUSTER EX. # 2008110066 Pack: 22per Ammo Can

M585 WHITE STAR CLUSTER NSN: # 1310-00-922-9784 2 Ammo Cans per crate

HAZ CLASS: 1.4G DODIC: 8536





Tel: (516) 625-5787 • Fax: (516) 625-0988


M430, M433 Dummy Cartridge

M430 Shape Dummy Cartridge (40MM)

M433 Shape Dummy Cartridge (40MM)

M430 M433





Tel: (516) 625-5787 • Fax: (516) 625-0988


M26 Degradable Training Hand Grenade

M26 Degradable Training Hand Grenade





Tel: (516) 625-5787 • Fax: (516) 625-0988


40mm Smoke Grenade for M79

M713 40mm Red Smoke Ground Marker

M715 40mm Green Smoke Ground Marker

M716 40mm Yellow Smoke Ground Marker





Tel: (516) 625-5787 • Fax: (516) 625-0988


Impulse Cartridges





Tel: (516) 625-5787 • Fax: (516) 625-0988


Explosives

Leads, Detonators & Boosters

Used in various explosive devices

M505 Booster

Booster Tape

Explosive leads 120MM Tracer Cup Assembly

Explosive Booster





Tel: (516) 625-5787 • Fax: (516) 625-0988


M781

40MM Practice Cartridge

M781

40MM Practice Cartridge

M781 is a fixed, practice-type ammunition designed for firing from 40 MM grenade

launchers M79 and M203. This cartridge is a fixed round of ammunition consisting

of a metal projectile body with a rotating band and a cartridge case assembly. A

hollow plastic ogive is filled with a high visibility yellow-orange dye. A .38 caliber

blank cartridge is press-fitted into the base of the cartridge case and provides the

gas pressure needed to propel the projectile through the launcher barrel. Projectile

range of 200-300 meters.





Tel: (516) 625-5787 • Fax: (516) 625-0988






Tel: (516) 625-5787 • Fax: (516) 625-0988


M49-A1

Surface Trip Flare

M49-A1

Surface Trip Flare

M49-A1 Surface Trip Flare is used for

illuminating encampment perimeters or

as a booby trap signal. The flare may

be fired by releasing the trigger or by

removing a pull pin. If a tripwire is

used, cutting or breaking the tripwire

will also fire the unit. Upon activation

the M49-A1 burns for a minimum of

55 seconds and with an average

luminosity of 35,000 candle power.





Tel: (516) 625-5787 • Fax: (516) 625-0988






Tel: (516) 625-5787 • Fax: (516) 625-0988


MK 124

Smoke & Illumination Signal

MK 124 Smoke & Illumination Signal

This signal consists of an aluminum case with protective caps on each end. The case has

two raised beads around the circumference for positive flare identification during night use.

The case contains four sub-assemblies: smoke candle, smoke igniter, flare candle, and flare

igniter. The igniter consists of an arming lever that must be extended before functioning

and a mechanism that cocks and then releases the firing pin.





Tel: (516) 625-5787 • Fax: (516) 625-0988


MK-155

Training Flash Bang

MK-155

Training Flash Bang

The MK-155 contains a M201 A1 Smoke Grenade

Fuze and a standard ballistic propellant as the main

charge. MK-155 is a manually deployed non-

fragmenting training charge which simulates a

Flash-Bang Diversionary Charge. The MK-155 is

attached to a reusable base.

Technical Data Delay 1.2 to 1.8 seconds

Cotter Pin Pull Force 8 to 23 pounds

Output Overpressure 160 to 165 Dbl

Water Submersible 30 feet

Shipping

40 each per Ammo Can

2 Ammo Cans per Wirebound Box

Classification 1.4G





Tel: (516) 625-5787 • Fax: (516) 625-0988


40MM Non-Lethal

Marking Cartridge

40MM Non-Lethal

Marking Cartridge

This round provides a non-lethal point control measure on a targeted individual. The

projectile has a crushable rubber nose and a hollow internal cavity which houses the

liquid payload. On impact, the internal cavity ruptures. This action transfers kinetic

energy as well as the payload to the target, allowing effective delivery of a variety of

non-lethal liquid payloads.





Tel: (516) 625-5787 • Fax: (516) 625-0988


Non-Metallic Training Hand Grenade

Environmentally Friendly • Safe • Realistic Training

This non-metallic training hand grenade simulates the M69 grenade.

The bomb body is made of clay and mineral powder and the fuse body

is made of bio-degradable plastic.

Weight: 13 oz.

Height: 3 3/4"

Diameter: 2 1/4"

Delay: 4.5 sec

Sound: 100+ decibels

Color: Blue with white markings





Tel: (516) 625-5787 • Fax: (516) 625-0988


LX01

Car Bomb Simulator

LX01

Car Bomb Simulator

The 25 lb. naphthalene bombs are devices

that create a ball of flame approximately

50-75 feet in diameter that travels a

minimum of 100 feet into the air. The

bomb device is 12 inches in diameter and

14 inches in height. These devices contain

an electrical initiator with leads of at least

50 feet in length.





Tel: (516) 625-5787 • Fax: (516) 625-0988


LX09 44MM Bowman

Stinger Missile Simulator

LX09 44MM Bowman

Stinger Missile Simulator

The Bowmans are used to replicate a Shoulder Fired Rocket Propelled Grenade. The Bowman

produces a signature white ball of fire that is approximately 2 inches in diameter and travels

approximately 75-100 meters. This device is approximately 2 inches in diameter and 12 inches

in length. The Bowman is constructed of a cardboard tube with a 3-foot lead wire and must be

fired from an angular launcher. Cannot be manually deployed.





Tel: (516) 625-5787 • Fax: (516) 625-0988


LX45 Vulcan

Tracer Fire Simulator

LX45 Vulcan

Tracer Fire Simulator

The Vulcan Simulators are devices that are

used to replicate Small Arms Fire. The

devices are 15 inches in length and 4-3/4

inches in width, weighing approximately 3.5

lbs. The simulator has four rows with fifteen

tubes to each row, which are fired one row

at a time to produce fifteen shots fired at

approximately 0.05 seconds to 1.0 second

intervals for a total of sixty shots.

The simulator shoots colored lights at

approximately 50 yard distances. These

devices are available in red, green, and

white light. The simulator is provided with

moisture resistant protection and a

camouflage exterior. The devices are sealed

in barrier bags and packaged one per box.


MIL-SPEC INDUSTRIES CORP.42 Herb Hill Road • Glen Cove, NY 11542Tel: (516) 625-5787 • Fax: (516) 625-0988e-mail: [email protected]://www.mil-spec-industries.com

MIL-SPECINDUSTRIES

Documents

Mil-Spec Pyrotechnics Catalog · Surface Trip Flare M49-A1 Surface Trip Flare M49-A1 Surface Trip Flare is used for illuminating encampment perimeters or as a booby trap signal. The