MIGATRONIC ACCESSORIESshop.migatronic.cz/inshop/files/81910117/Prislusenstvi... · 2017. 2. 27. · 3M™ Speedglas™ 9100 Welding Shield Accessories and spare parts 50 11 05 Speedglas

1

MIGATRONIC ACCESSORIES

2 3

Personal safety

Pressure regulators

Remote controls

Chemicals

Tools

Fume extraction

Automotive equipment

Quick release fittings

Cables/plugs and holders

Electrode ovens

4 - 19

20 - 22

23

23

24

25

26- 29

30- 31

32 - 34

35

2

Have you chosen the right accessories?

Personal safetyMigatronic personal safety products have been produced specifically for the welding industry and are marked, tested, and sub-sequently approved according to accepted standards. All of Migatronic’s personal safety products carry CE qualification.

Pressure regulatorsMigatronic offers a new and complete range of pressure regulators. Migatronic pressure regulators in the 200 range cover all requirements, and the incorporation of a gas saver regulator will allow you to save up to 60% of your gas consumption.

Protector welding helmets The Migatronic Protector welding helmets are made of lightweight and robust mate-rials using advanced moulding techniques. The design provides optimum protection of the welder’s head, chin and ears.

Automotive equipmentSince its establishment back in 1970, Mi-gatronic has been engaged in optimising welding equipment for the automotive trade. More than 40 years’ experience that we would like to share with you.

Range of accessoriesShould you not find the required item in this catalogue, please contact Migatronic.

4 5

Welding mat Leather and split leather.Length 520 mm, width 330 mm.Article no. ...................81930010

Personal safety

Welding gloves MIG/MAGLuxury MIG/MAG welding gloves. Very comfortable and soft heat-resistant leather gloves with internal Kevlar stitching.Article no. ...................81930038

Welding gloves Strong welding gloves made of cowhide. Upper side of split leather and index finger of hide. Size 11.Article no. ...................81930034

Welding apronWelding apron in split leather with riveted nylon strap and click buckle.Length 900 mm, width 580 mm.Article no....................81930015

Skirt apronSkirt apron in split leather with riveted nylon strap and click buckle.Length 500 mm, width 580 mm.Article no. ...................81930018

Welding jacketLightweight, protective weld-ing jacket in fire-resistant fabric. Designed specifically for the welding industry. One-size.Article no. ...................81930043

LeggingsLegging in split leather with Velcro fastening. Sets of two.Article no. ...................81930036

Welding hoodWelding hood in split leather for protection of head and back of the head during weld-ing.Article no....................81910117

Welding hoodWelding hood in fire-resistant fabric for protection of head, neck and shoulders against weld spatter, grinding Art.icles and radiation.Article no....................81930042

Neck protectionNeck protection designed spe-cifically for Migatronci welding helmet. Protects against weld spatter and radiation.Article no. ...................81930041

SleevesLightweight set of sleeves with elastic and buttons for shoul-der fixing. Protects against grinding Art.icles and weld spatter.Article no. ...................81930040

Welding gloves TIGWelding gloves in a soft quality with a 14 cm cuff in split leather sewn with Kevlar. Perfect for quality welding. Size 9 and 109: Article no. .............. 81930023 10: Article no. ............ 81930024

Welding gloves TIGTIG welding gloves in a soft quality; cuffs in cowhide; sewn with Kevlar; sizes 9/10/11.9: Article no. .............8193002510: Article no. .............8193002611: Article no. .............81930027

Fibreglass welding helmet *Fibreglass welding helmet with flip-up frontpiece.Welding/safety glass 60 x 110 mm.Observation glass 64 x 101 mmArticle no. ...................81910180

Headband for welding helmetArticle no. ...................81910100

Polypropylene welding helmetPolypropylene welding helmet with clear glass observation strip.Welding/safety glass 60 x 110 mm. Observation glass 22 x 108 mmArticle no. ...................81910090


Fibreglass welding helmetFibreglass welding helmet with clear glass observation strip.Welding/safety glass 60 x 110 mm. Observation glass 22 x 108 mmArticle no. ...................81910001


Welding/grinding goggles *Combined welding/grinding goggles with round carborock glass. Fixed grinding goggles and flip-up welding glasses. Glasses can be changed as required.Article no. ...................81912005

Grinding shieldStandard grinding shield with pivot fittings in headband.Article no. ................. 81910007

Visor for grinding shieldArticle no. ................. 81910008

Sweat frontletSweat frontlet of imitation leather for fixing on headband.Sets of two.Article no. ...................81910119

Welding/cutting gogglesWelding/cutting goggles with side protection and leather head strap.DIN 6: Article no. ...................81912305

HandshieldSmall green PVC hand shield.Article no. ...................81910144

* = Special order item

Welding gloves MIG/MAGWelding gloves in a soft quality; top side and cuffs in cowhide; sewn with Kevlar; unlined; size 10.Article no. ...................81930033

Protector Focus welding helmet Automatic filter (ADF); external DIN adjustment 9-13; adjust-able delay; visual field 42 x 96 mm; adjustable sensitivity; solar battery.Article no. .................81910597

Green welding helmetEconomy welding helmet with clear glass observation strip.Article no. .................81910010


6 7

Personal safety

You can adjust the sensitivity of the arc detection for unsurpassed switching reliability.

Magnification made easy. The magnify-ing lens holder is built into the welding filter, making lens installation easier and more secure.

Seven user selectabledark shades for most types of arc welding.

The tack welding comfort mode uses a shade 5 light state.

The Delay function allows you to set the dark-to-light switching time.Conforms to European Standard

379 for eye protection for wel-ders, as well as other national standards (USA, Canadian, Aus-tralian — to name a few).

The Speedglas 9100 Series includes three auto-darkening filters: regular, large, and extra-large viewing area.

The big, 17 x 10 cm clear protective visor is curved, increasing your peripheral vision.

Exhaled air is channelled out via side exhaust vents.

100% compatible with our top-of-the-line series of 3M™ Speedglas™ 9100 Welding Filters.

Meets the requirements of mechanical resistance to high speed Art.icles accor-ding to EN 175:B and at extremes of temperatures, -5°C to +55°C, per EN 166:BT.

High-comfort Speed-glas 9100 Headband.

SideWindows: Shade 5 filters that widen your field of vision.

3M™ Speedglas™ 9100 FX Welding Shield

Introducing the Speedglas 9100 FX Welding Shields, a flip-up combination of an auto-darkening welding shield and a protective visor. Not only is the viewing area larger compa-

red to previous models, we totally redesigned the geome-try of the shield for a wider field of view in all directions.

Wider Field of View with Flip-Up Front

• The 3M™ Speedglas™

9100XX Filter is 30%

larger than any other

Speedglas welding filter.

• Seven dark shades,

including 9–13 (variable),

5-8 for gas welding/

cutting, and 8 for micro-

plasma or low-amp TIG.

• Outstanding low-amp TIG

performance, even on

settings as low as 1 amp.

• Any shade can be “locked-

in.” For example, you

can lock-in the light state

shade 3 for grinding with

9100 standard.

• Exclusive, innovative tack

welding comfort mode

which can help reduce eye

strain.Excellent Optics, Bigger Views

52 80 058191066481910665

8191066652 70 0052 70 70

50 00 058191066750 00 25

50 11 9050 18 90

53 20 00

53 20 15

53 10 00

81910660

16 90 05

16 90 10

16 80 15

53 61 00

53 62 00

53 60 00

50 11 00 / 50 18 00

53 30 00

81910659

8191065481910655819106568191065781910658

Art. No Description Art. No Description Art. No Description

3M™ Speedglas™ 9100 Welding Shield

Accessories and spare parts

50 11 05 Speedglas 9100 Welding Shield without SideWindows, with 9100V Filter.

50 11 15 Speedglas 9100 Welding Shield without SideWindows, with 9100X Filter.

50 11 25 Speedglas 9100 Welding Shield without SideWindows, with 9100XX Filter.

50 18 05 Speedglas 9100 Welding Shield with SideWindows and 9100V Filter.

81910610 Speedglas 9100 Welding Shield with SideWindows and 9100X Filter.

50 18 25 Speedglas 9100 Welding Shield with SideWindows and 9100XX Filter.

* Please use Art. No 50 18 90 when ordering replacement SideWindows.


16 80 15 Comfort sweatband, pkg of 3.16 90 05 Head protection, black.16 90 10 Neck protection, black.81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter,

variable shade 5, 8, 9–13.81910667 Speedglas 9100X Welding Filter,

variable shade 5, 8, 9–13.50 00 25 Speedglas 9100XX Welding Filter,

variable shade 5, 8, 9–13.

50 11 00 9100 Welding Shield without SideWindows, with headband.

50 11 90 9100 Welding Shield without SideWindows, without headband.

50 18 00 9100 Welding Shield with SideWindows and headband.

50 18 90* 9100 Welding Shield with SideWindows, without headband.

81910666 Outer protection plate standard, pkg of 10.

52 70 00 Outer protection plate extra scratch resistant, pkg of 10.

52 70 70 Outer protection plate heat resistant pkg of 10.

52 80 05 Inner cover plate for 9100V Filter, pkg of 5. Plate marking 117x50.

81910664 Inner cover plate for 9100X Filter, pkg

of 5. Plate marking 117x61.81910665 Inner cover plate for 9100XX Filter,

pkg of 5. Plate marking 117x77.53 10 00 Battery holder, pkg of 2.53 20 00 Heat-reflecting silver front.53 20 15* SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 headband with

assembly parts.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband front Art..53 62 00 Headband back Art..

Six-figure Art. No. = Special order item

Personal safety

8 9

81910659

16 80 15

53 61 00

53 62 00

53 60 00

53 30 00

81910679

81910680

16 90 10

8191067781910678

54 18 90

53 20 16

8191066652 70 0052 70 70

50 00 058191066750 00 25

53 10 00

81910660

54 05 00

54 18 00

8191065481910655819106568191065781910658

52 80 058191066481910665

3M™ Speedglas™ 9100 FX Welding Shield

54 18 05 Speedglas 9100 FX Welding Shield with SideWindows and 9100V Filter.

81910620 Speedglas 9100 FX Welding Shield with SideWindows and 9100X Filter.

54 18 25 Speedglas 9100 FX Welding Shield with SideWindows and 9100XX Filter.

16 80 15 Comfort sweatband, pkg of 3.81910679 Head protection (small).81910680 Neck protection (large).81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter,

variable shade 5, 8, 9-13.81910667 Speedglas 9100X Welding Filter,

variable shade 5, 8, 9-13.

50 00 25 Speedglas 9100XX Welding Filter, variable shade 5, 8, 9-13.

81910677 Visor plate standard, pkg of 5.81910678 Visor plate anti-fog, pkg of 5.81910666 Outer protection plate, standard,

pkg of 10.52 70 00 Outer protection plate, extra

scratch resistant, pkg of 10.52 70 70 Outer protection plate, heat

resistant pkg of 10.52 80 05 Inner cover plate for 9100V Filter,

pkg of 5. Plate marking 117x50.81910664 Inner cover plate for 9100X Filter,

pkg of 5. Plate marking 117x61.

81910665 Inner cover plate for 9100XX Filter, pkg of 5. Plate marking 117x77.

53 10 00 Battery holder, pkg of 2.53 20 16 SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Series Headband,

with assembly parts.53 60 00 Pivot mechanism, left and right.53 61 00 Headband front Art..53 62 00 Headband back Art..54 18 00 Speedglas 9100 FX shield, without

welding filter, with headband.54 18 90 Speedglas 9100 FX shield, without

welding filter, without headband.54 05 00 Front cover kit.




3M™ Speedglas™ SL Welding Shield

81910630

8191066081910675

16 40 05

81910668 72 70 00

8191066216 76 0016 80 0081910663

70 50 10

70 60 00

81910659

16 90 01

73 10 00

8191065242 80 05

70 11 90

70 00 20

70 62 02

8191065481910655819106568191065781910658

16 40 05 Ear and neck protection in leather (3 parts).

81910662 Sweatband, towelling, purple, pkg of 2.

16 76 00 Sweatband, towelling, pkg of 20.16 80 00 Sweatband, leather.81910663 Sweatband, fleecy cotton.16 90 01 Neck protection black/grey.81910659 Hood black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.

81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910675 Holder for magnifier.81910660 Battery, pkg of 2.81910652 Inner cover plate (42 x 91 mm), pkg

of 5. Plate marking 42 02 00.42 80 05 81910652, pkg of 200.70 00 20 Speedglas SL Welding Filter, variable

shade 8-12.81910630 Speedglas SL Welding Shield. with

welding filter, variable shade 8– 12.

70 11 90 Welding shield, without headband.70 50 10 Headband with assembly parts.70 60 00 Assembly parts for headband.70 62 02 Filter locking frame, pkg of 2.81910668 Outer protection plate, standard,

pkg of 5. Plate marking 030226.72 70 00 Outer protection plate, scratch

resistant, pkg of 5. Plate marking 030248.

73 10 00 Battery cover.



Personal safety

10 11

81910659

16 90 01

16 40 05

8191065177 70 0077 70 70

8191065242 80 2042 80 40

75 00 1075 00 1175 00 20

81910653

81910654 thru 58

81910660

73 10 00

16 50 1516 50 25

16 50 30

75 11 9075 12 90 75 13 9075 14 9075 15 9075 16 9075 17 9075 18 9075 19 9075 20 9075 21 90

75 11 00

8191066216 76 0016 80 0081910663

70 50 10

70 60 00

75 13 20

77 20 0077 20 01

3M™ Speedglas™ 100 Series Welding Shields

16 40 05 Ear and neck protection in leather. 16 50 15 Headband with assembly parts.16 50 25 Headband 1 UL with assembly parts.16 60 30 Assembly parts for headband.81910662 Sweatband, towelling purple, pkg

of 2.16 76 00 Sweatband, towelling purple, pkg

of 20.16 80 00 Sweatband, leather.81910663 Sweatband, fleecy cotton.16 90 01 Neck protection, black/grey.81910659 Hood black/grey81910653 Holder for magnifier.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.81910652 Inner cover plate, pkg of 5.

Plate marking 42 02 00.42 80 20 Inner cover plate, +1 shade,

pkg of 5.

42 80 40 Inner cover plate, +2 shade, pkg of 5. 70 50 10 Comfort Headband with assembly

parts.70 60 00 Assembly parts for headband.73 10 00 Battery cover. 75 00 10 Speedglas 100S-10 Welding Filter,

single shade 10.75 00 11 Speedglas 100S-11 Welding Filter,

single shade 11.75 00 20 Speedglas 100V Welding Filter,

variable shade 8-12.75 11 00 Welding shield black, without

welding filter with headband.75 11 90 Welding shield black, without

welding filter, without headband.75 12 90 Welding shield Blaze, without

welding filter, without headband.75 13 90 Welding shield Tribal, without

welding filter, without headband.75 14 90 Welding shield Chrome, without

welding filter, without headband.75 15 90 Welding shield Mechanical skull,

without welding filter, without

headband.75 16 90 Welding shield Trojan Warrior,

without welding filter, without headband.

75 17 90 Welding shield Aces High, without welding filter, without headband.

75 18 90 Welding shield Steel Rose, without welding filter, without headband.

75 19 90 Welding shield Skull Jewels, without welding filter, without headband.

75 20 90 Welding shield Wild n’ Pink, without welding filter, without headband.

75 21 90 Welding shield Steel Eyes, without welding filter, without headband.

77 20 00 Front frame, silver.77 20 01 Front frame, black.81910651 Outer protection plate, standard,

pkg of 10.77 70 00 Outer protection plate, scratch

resistant, pkg of 10.77 70 70 Outer protection plate, heat

resistant, pkg of 10.

Art. No Description

Art. No Description Art. No Description


75 11 10 Speedglas 100 Welding Shield Black with 100S-10 Filter.

75 11 11 Speedglas 100 Welding Shield Black with 100S-11 Filter.

81910600 Speedglas 100 Welding Shield Black with 100V Filter.

75 12 20 Speedglas 100 Welding Shield Blaze, with 100V Filter.

75 13 20 Speedglas 100 Welding Shield Tribal with 100V Filter.

75 14 20 Speedglas 100 Welding Shield Chrome with 100V Filter.

75 15 20 Speedglas 100 Welding Shield Mechanical skull with 100V Filter.

75 16 20 Speedglas 100 Welding Shield Trojan Warrior with 100V Filter.

75 17 20 Speedglas 100 Welding Shield Aces high with 100V Filter.

75 18 20 Speedglas 100 Welding Shield Steel Rose with 100V Filter.

75 19 20 Speedglas 100 Welding Shield Skull Jewels with 100V Filter.

75 20 20 Speedglas 100 Welding Shield Wild ’n’ Pink with 100V Filter.

75 21 20 Speedglas 100 Welding Shield Steel Eyes with 100V Filter.


83 50 05

83 76 21

83 73 00

83 25 10

83 25 30 / 85 25 31

83 50 00 83 31 01

83 80 30 83 60 00 83 60 10 83 70 10 83 76 20

83 80 20

83 71 10 83 71 20

83 32 06

83 70 00

83 72 42

83 72 4283 75 42

83 40 0083 40 0583 40 0883 40 1083 40 1283 40 1383 40 1683 40 17

83 40 18

83 40 16

53 35 05

53 35 06

79 01 01 83 50 20

3M™ Adflo™ Powered Air Respirator

83 25 10 Adflo Respirator with self-adjusting breathing tube QRS, adapter (53 35 06), airflow indicator, prefilter, spark arrestor, Art.icle filter and

battery.

83 25 30 Adflo Respirator with self-adjusting breathing tube QRS, breathing tube adapter, airflow indicator, prefilter, spark arrestor, Art.icle filter, battery,

belt and charger.83 25 31 Adflo Respirator as in 83 25 30, but

with heavy-duty battery.



53 35 05 Adapter for non-QRS breathing tubes when using Speedglas 9100 Series welding shields.

53 35 06 Adapter for QRS breathing tubes when using Speedglas 9000 Series welding shields.

79 01 01 Product carry bag. 83 31 01 Battery charger. 83 32 06 6-station battery charger kit.83 40 00 Breathing tube, lightweight, non-

QRS.83 40 03 Replaced by 83 40 18.83 40 05 Breathing tube, heavy-duty rubber,

non-QRS.83 40 08 Breathing tube with silencer, non-

QRS..83 40 10 Breathing tube, lightweight, 25 cm

longer, non-QRS.

83 40 12 Breathing tube, double length, non-QRS.

83 40 13 Breathing tube, lightweight, triple length, non-QRS.

83 40 16 Breathing tube, self-adjusting (52,5 to 85 cm), with QRS connection.

83 40 17 Breathing tube, heavy-duty rubber, with QRS connection.

83 40 18 Flame resistant breathing tube cover.

83 45 00 Gasket for non-QRS breathing tubes, not shown, pkg of 5.

83 50 00 Belt.83 50 05 Front Art., belt.83 50 10 Quick connection for belt (not

shown).83 50 20 Braces.83 60 00 Spark arrestor.

83 60 10 Prefilter, pkg of 5.83 60 80 Prefilter, pkg of 80.83 70 00 Storage bag.83 70 10 Art.icle filter P SL.83 70 20 Art.icle filter P SL, pkg of 20.83 70 80 Art.icle filter P SL, pkg of 80.83 71 10 Odour filter.83 71 20 Odour filter pad.83 72 42 Gas filter A1B1E1.83 73 00 Gas filter kit: A1B1E1 filter

and Heavy-Duty battery.83 75 42 Gas filter A2.83 76 20 Battery (standard).83 76 21 Battery Heavy-Duty.83 80 20 Airflow indicator.83 80 30 Filter cover.



Personal safety

12 13

53 35 06

There is a new type of supplied air breathing tube, named Breathing Tube QRS. QRS stands for Quick Release Swivel, which enables one-handed con-nection and release. Article no. .....................85 30 64

3M™ Fresh-air™ C Supplied Air Regulator

85 20 16

85 21 1685 20 10

80 60 00

85 21 10

85 70 00

85 10 11

85 10 10

85 90 04

85 90 01

ACU-02

ACU-01

85 41 10

85 21 56

85 21 55

85 21 53

85 30 64

85 21 58

85 30 62

53 35 06 Adapter for QRS breathing tubes when using Speedglas 9000 Series welding shields.

80 60 00 Comfort belt.85 10 10 Y-coupling SR49/SR79.85 10 11 Coupling SR49.85 21 53 Quick connection CEJN 2201/4.85 21 55 Nipple regulator CEJN 342.85 21 56 Quick connection CEJN 342.85 21 58 Spare Art. nipple breathing tube

CEJN 220 1/4.85 30 62 Breathing tube (transparent) with

nipple, without QRS Connection. 85 30 64 Breathing tube (blue) with nipple

and QRS Connection. 85 41 10 Approved air supply tube 10 m

green. Other lengths according to quotation.

85 70 00 Storage bag.85 90 01 Filter element 292 SR49/SR79.

85 90 04 Gasket kit SR49/SR79 Housing.ACU-01 3M Aircare Filtration System

(wall mounted).ACU-02 3M Aircare Filtration System

(stand alone).



85 20 10 Fresh-air C Regulator, without belt, without breathing tube.

85 20 16 Fresh-air C Regulator with breathing tube QRS (85 30 64), comfort belt and storage bag.

85 21 10 Fresh-air C Regulator with storage bag, without belt, without breathing tube.

85 21 16 Fresh-air C Regulator with breathing tube QRS (85 30 64) and storage bag, without belt.


The blue breathing tube!

* Please use Art. No 56 08 90 when new SideWindows are required.

8191065481910655819106568191065781910658

52 80 058191066481910665

8191066652 70 0052 70 70

50 00 058191066750 00 25

53 20 00

53 20 15

53 10 00

81910660

16 90 05

16 90 10

16 80 15

53 61 00

53 62 00

53 60 00

56 28 00

53 30 00

81910659

56 08 90

53 41 0053 37 00

53 35 05

16 80 15 Comfort sweatband, pkg of 3.16 90 05 Head protection, black.16 90 10 Neck protection, black.81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter.81910667 Speedglas 9100X Welding Filter.50 00 25 Speedglas 9100XX Welding Filter.81910666 Outer protection plate, standard,

pkg of 10.52 70 00 Outer protection plate, extra

scratch resistant, pkg of 10.

52 70 70 Outer protection plate, heat resistant pkg of 10.


81910664 Inner cover plate for 9100X Filter, pkg of 5. Plate marking 117x61.


53 35 05 Welding shield adapter when using old type of breathing tube (non-QRS).

53 10 00 Battery holder, pkg of 2.53 20 00 Heat-reflecting silver front.53 20 15* SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Headband with

assembly parts.53 37 00 Air duct.

53 41 00 Face seal.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband front Art..53 62 00 Headband back Art..56 08 90 9100 Air Welding Shield without

headband, without air duct, without face seal, without filter.

56 28 00 9100 Air Welding Shield, without welding filter.



3M™ Speedglas™ 9100 Air Welding Shield for Respiratory Protection

56 66 00 Speedglas 9100 Air Welding Shield without welding filter, with Adflo Respirator.

56 66 05 Speedglas 9100 Air Welding Shield with 9100V Filter, with Adflo Respirator.

56 66 15 Speedglas 9100 Air Welding Shield with 9100X Filter, with Adflo Respirator.

56 66 25 Speedglas 9100 Air Welding Shield with 9100XX Filter, with Adflo Respirator.

56 88 00 Speedglas 9100 Air Welding Shield without welding filter, with Fresh-air C Regulator.

56 88 05 Speedglas 9100 Air Welding Shield with 9100V Filter, with Fresh-air C Regulator.

56 88 15 Speedglas 9100 Air Welding Shield with 9100X Filter, with Fresh-air C Regulator.

56 88 25 Speedglas 9100 Air Welding Shield with 9100XX Filter, with Fresh-air C Regulator.



Personal safety

14 15

53 60 00

81910659

16 80 15

53 61 00

53 62 00

53 30 00

16 90 10

8191065481910655819106568191065781910658

52 80 058191066481910665

8191066652 70 0052 70 70

50 00 058191066750 00 25

54 28 00

53 35 05

53 50 00

81910679

53 35 00

8191067781910678

54 05 0053 20 1654 18 90

81910680

81910681

53 10 00

81910660

3M™ Speedglas™ 9100 FX Air Welding Shield for Respiratory Protection

16 80 15 Comfort sweatband, pkg of 3.81910679 Head protection, (small).81910680 Neck protection, (large).81910659 Hood, black/grey.81910654 Magnifying lens 1.0.81910655 Magnifying lens 1.5.81910656 Magnifying lens 2.0.81910657 Magnifying lens 2.5.81910658 Magnifying lens 3.0.81910660 Battery, pkg of 2.50 00 05 Speedglas 9100V Welding Filter.81910667 Speedglas 9100X Welding Filter.50 00 25 Speedglas 9100XX Welding Filter.81910677 Visor plate, standard, pkg of 5.81910678 Visor plate, anti-fog, pkg of 5.

81910666 Outer protection plate, standard, pkg of 10.

52 70 00 Outer protection plate, extra scratch resistant, pkg of 10.

52 70 70 Outer protection plate, heat resistant, pkg of 10.


81910664 Inner cover plate for 9100X Filter, pkg of 5. Plate marking 117x61.


53 10 00 Battery holder, pkg of 2.53 20 16 SideWindows cover plate, 2 pairs.53 30 00 Speedglas 9100 Series Headband,

with assembly parts.

53 35 05 Adapter for non-QRS breathing tubes when using Speedglas 9100 Series welding shields.

53 35 00 Air duct.81910681 Face seal.53 50 00 Air deflector.53 60 00 Pivot mechanism, left and right. 53 61 00 Headband, front Art..53 62 00 Headband, back Art..54 18 90 Speedglas 9100 FX Air Welding

Shield, without filter, without face seal, without air duct, without headband.

54 28 00 Speedglas 9100 FX Air Welding Shield without welding filter, with headband.

54 05 00 Front cover kit.



54 66 00 Speedglas 9100 FX Air Welding Shield, without welding filter, with Adflo Respirator.

54 66 05* Speedglas 9100 FX Air Welding Shield with 9100V Filter, with Adflo Respirator.

81910625* Speedglas 9100 FX Air Welding Shield with 9100X Filter, with Adflo Respirator.

54 66 25* Speedglas 9100 FX Air Welding Shield with 9100XX Filter, with Adflo Respirator.

54 88 00 Speedglas 9100 FX Air Welding Shield, without welding filter, with Fresh-air C Regulator.

54 88 05 Speedglas 9100 FX Air Welding Shield with 9100V Filter, with Fresh-air C Regulator.

81910627 Speedglas 9100 FX Air Welding Shield with 9100X Filter, with Fresh-air C Regulator.

54 88 25 Speedglas 9100 FX Air Welding Shield with 9100XX Filter, with Fresh-air C Regulator.

* With bag (79 01 01)


A Filter cover: holds the user-replaceable spark arrestor, which reduces the risk of filter fires.

B Prefilter: increases the service life of the Art.icle filter.

C Art.icle filter: high ef-ficiency Art.iculate filtra-tion.

D Gas filter: (A1B1E1 or A2) captures organic, inorganic and acid gases and vapours. Gas filters sold separately.

E Odour filter: removes unpleasant smells (not needed if a gas filter is installed); sold separa-tely.

F NiMH battery: fully charged in four hours. Expected operating time is 8 hours with new Art.icle filter and new, fully-charged battery.

G Brushless motor: with an average life three times longer than conventional motors.

H Filter Indicator: indicates the status of the Art.icle filter.

I Airflow Plus: for hot, humid jobs, you can increase the airflow from 170 l/min to 200 l/min with the push of a but-ton.

J Breathing tube: self-adjusting or heavy-duty rubber.

K Exclusive airflow pat-tern: evenly distributes filtered air throughout the entire breathing zone of the shield. The intelligent turbo unit keeps the airflow rate at a constant, preset level. A diffuser spreads out the airflow pattern for your maximum comfort.

L Soft, flexible face seal (removed here for clarity): creates a positive pres-sure environment within the shield, keeping the surrounding pollutants at bay.

Shown here: 3M™ Adflo™ Powered Air Respirator with 3M™ Speedglas™ 9100 FX Air Welding Shield.

Respiratory Protection


Personal safety

16 17Pr

ote

cto

r O

ne

Pro

tect

or

Two

Pro

tect

or

Thre

e

Pro

tect

or

Fou

r

Pro

tect

or

4,5

Pro

tect

or

Five

50

1 -

551

Pro

tect

or

Five

Tu

rbo

Max

. 50

1TM

Pro

tect

or

Five

Excl

us.

J.B

.O.A

rgo

n w

ith

o

bse

rvat

ion

sti

p

J.B

.O. A

rgo

n w

ith

fl

ip-u

p f

ron

tpie

ce

Han

dsh

ield

Article no. Size

81911081 DIN 7 51x108 • • •81911001 DIN 8 51x108 • • •81911007 DIN 9 51x108 • • •81911005 DIN 10 51x108 • • •81911008 DIN 11 51x108 • • •81911006 DIN 12 51x108 • • •81911049 DIN 13 51x108 • • •81911004 Green acrylic 22x108 •

81911063 Yellow acrylic 22x108 •

81911082 DIN 7 60x110 • • •81911060 DIN 8 60x110 • • •81911059 DIN 9 60x110 • • •81911058 DIN 10 60x110 • • •81911057 DIN 11 60x110 • • •81911056 DIN 12 60x110 • • •81911055 DIN 13 60x110 • • •81911045 1000 hours filter 51x108 • • •81911053 1000 hours filter 60x110 • •81911003 Clear acrylic 22x108 •81911002 Clear acrylic 51x108 • •81911054 Clear acrylic 60x110 • •81911061 Clear acrylic 64x101 •81910401 DIN 9 90x110 •81910402 DIN 10 90x110 •81910403 DIN 11 90x110 •81910404 DIN 12 90x110 •81911062 Clear protection glass 90x110 • • • • •81910107 Clear protection glas 97x110 • • • • • •81910106 Clear protection glas 51x107 • • • •81911064 Clear protection glas 25x110 •81911065 Clear protection glas 68x110 •81910418 Clear protection glas 66x109 •81910414 Optical filter DIN 10 90x110 •81910417 Optical filter DIN 10-13 90x110 •81910420 Optical filter DIN 9-12 90x110 •

•Old models •New models If you require DIN filters or clear protection glass in special measurements, please contact Migatronic.

Technical Specifications of 3M™ Air Delivery Units for Welding Safety

Power filters for welding helmets

51 x 108 mm Clear + 1.0 Article no. .............................. 81911051




Internal protection glass for Protector ADF welding helmet

10 pcs.Article no. ...................81910586

External protection glass for Protector ADF welding helmet

10 pcs.Article no. ...................81910585

Technical Specifications3M™ Adflo™

Powered Air Respirator3M™ Fresh-air C Supplied Air Regulator

Filters Art.icle filterGas Filter (A1B1E1 or A2) Odour filter

N/A

Airflow 170 l/min (Nominal)200 l/min (Airflow Plus Mode)

170-280 l /min (Nominal)

Air PressureAir Quality

N/AN/A

4–8 barBreathable supplied air conforming to EN12021

Weight Respirator / Regulator 1 160 g

365 g

Battery Charging timeOperating hours*

NiMHLess than 4 hours8 hours (Standard), 12 hours (High capacity)

N/A

BeltOptional extension

Leather, 75–115 cm+25 cm

Polypropylene, 76–133 cm

Temperature range:OperationStorage

-5 ° C to + 55 ° C-20 ° C to + 55 ° C

-5 ° C to + 55 ° C-20 ° C to + 55 ° C

* Run times are with new, fully-charged batteries and new filters.

Personal safety

18 19

Curtain standCurtain stand for Migatronic kit.Dimension H x W:2000 x 2000 mmArticle no. .................81910209

Migatronic kitWelding curtains incl. stand.Measurement W x H: 2000 x 2000 mm. Strip curtainsmeasurement:W x H x D: 470 x 1600 x 1,0 mm

Available with the followingcurtains:Dull green, non-transparent:Article no. ...................81910189Bronze, transparent:Article no. ...................81910188Orange, transparent:Article no. ...................81910187

Strip curtainsMigatronic welding curtains with 1.0 mm thick strips. Supplied in boxes of 4. Check dimensions of the strip curtains in the table below and design a booth that suits your require-ments.

Large workpieces can easily be passed through the curtains, and in the case of damage it is necessary to replace only the damaged strip(s).

Hooks for standArticle no. .................81910210

Clear:Protection against draught and grinding dust

Orange:Shielding during arc welding

Bronce:Shielding during arc welding

Green (non-transparent):Shielding during arc welding

Mobile welding curtainMobile welding curtain with2 pivoting arms allows you tomake either a booth or anextended curtain (4050 mmx 2100 mm). The stand issupplied with 1.0 mm thicknon-transparent or orange strips.Non-transparent stripsArticle no. .................81910284Orange strips Article no. .................81910294

Welders risk exposure to radiation, weld spatter and grinding dust during welding operations. The use of Migatronic shielding products reduces this risk considerably and

eliminates radiation damage if the products are used according to instructions.

Height mm

Width mm

Thickness mm

Number Dull green Bronze Orange(Special order item)

1600 570 1.0 4 81910163 81910169 81910166 *

2000 570 1.0 4 81910165 81910171 81910168 ** = Special order item

Welding curtainsSeparate curtains in standard sizes with ring holes at 22 cm spacing at the top and with plastic snap fasteners welded on the sides. Supplied with 7 steel rings. Available as follows:

WarningEyesight, one of our most important senses, is easily damaged by UV and IR radia-tion as well as by the visible blue light from the welding arc. Futhermore, sparks, spatter and metal splinters mayget into your eye and causepermanent sight damage.

StandardMigatronic welding curtains are DIN approved and meet the requirements of:• EN-1598• DIN21404,del2

Dull green Orange Brown (Bronze) Non-transparent Transparent Transparent

Height x width Article no. Article no. Article no.

1600 x 1400 mm 81910158 * 81910155 * 81910152 *

1800 x 1400 mm 81910159 * 81910156 * 81910153 *

2000 x 1400 mm 81910160 81910157 81910154

Migatronic welding curtainsand strip curtains protectagainst every kind of UVradiation up to 560 nm.

Migatronic welding curtainsand strip curtains aretransparent and protect theeyes from the damaging light.

3

7 1 54

6

2

4 8

Build your personal welding boothMax. distance between floor and curtain: 40 cm

Your personal welding booth can be made of curtains of fixeddimensions, curtains with snap fasteners or alternatively, strip curtains which are easy to replace in the case of damage.

Pos. no. Designation Article no.

1. Galvanised C-profile. Dimensions: 30 x 35 x 1.5 mm, (max 6 m) 81910356 2. Wall fittings for C-profile 81910241 * Angle brace 81910350 * Holder for C-profile 81910351 * 3. Galvanised support with baseplate for C-profile Height: 225 cm 81910353 * Height: 285 cm 81910354 * 4. Galvanised rail fittings for C-profile 81910357 * 5. Galvanised T-piece connecting C-profiles 81910352 * 6. Galvanised 90° bend, radius 500 for C-profile 81910355 * 7. Plastic sliding rails for C-profile (16 pcs.) 81910211 8. Curtain, see page 14

Mobile welding curtainWelding curtain incl. standDimensions W x H:1450 x 2000 mmAvailable with the followingcurtains:Dull green, non-transparent:Article no. .................81910150

Orange, transparent:Article no. .................81910151


20 21

Wall fittingsArticle no. .................81963130

T-pieceArticle no. ...................81963132

Angle pieceArticle no. .................81963131

Flowmeter pipe, completeArticle no. .................81963128

Flowmeter pipe, completeArticle no. ...................81963138

Closing regulatorArticle no. ...................81963133

Flowmeter pipe, exteriorArticle no. .................81963137

Gas flow gaugeArticle no. .................81010000

Manometer * Acetylene low pressureArticle no. .................81963140

Manometer Optimator, 3-5 barArticle no. .................81963127

Manometer * Carbo-/Argonex, Tigex high pressureArticle no. .................81963144

Quick-release fitting, maleGasArticle no. ...................43120008

Manometer * Acetylene high pressureArticle no. .................81963141

Manometer * Carbo-/Argonex, low pressureArticle no. .................81963145

Quick-release fitting, femaleFor pressure regulatorArticle no. ...................43120026

Flowmeter pipeFlowmeter pipe with exterior collarArticle no. ...................81963173

Pressure regulators

TIGEX I Ar/Mix 30 l.Article no. .................81963055

ARGONEX 30 l.Article no. ...................81963058

TIGEX II Ar/Mix 30 l.Article no. .................81963057

OxygenArticle no. .................81963066

TIGEX I CO2 30 l.Article no. ...................81963061

AcetyleneArticle no. ...................81963065

CARBONEX 30 l.Article no. .................81963060

Formier 30 l.Article no. .................81963067

OPTIMATOR Ar/mix Article no. ...................81963041

Formier 30 l.Article no. .................81963068

OPTIMATOR II Ar/mix Article no. .................81963043

OPTIMATOR Gas-saverAr/mixArticle no. ...................81963054

OPTIMATOR Ar/H2Article no. ...................81963042

OPTIMATOR II Ar/H2 *Article no. .................81963044

OPTIMATOR Tap unit1 flowmeterArticle no. ...................81963045

Optimator Gas-saverFor AltopArticle no. ...................81963316


22 23

Remote controls

MIG SprayMIG/MAG spray with propel-lant gas (propane). Approved for galvanisation without any pre- or post-treatment clean-ing. Supplied in 400 ml cans.Article no. .................81950009

Cooling liquidSpecial eco-friendly cooling liquid for Migatronic’s water-cooled welding machines.5 litre can:Article no. ...................99290505

RefillSilicone-free MIG spray refill:10 litre can.Article no. .................8195002710 litre can for robot.Article no. .................81950028

MIG PasteWelding and protection paste.Protects gas nozzles againstslag. Made of purely naturalproducts. Silicone-free. Suppliedin 300 g jars.Article no. .................81950026

Remote control FPBPulse adjustment, also with pulsing in slope-up and slope-down function. Infinitely-variable adjustment of pulse current and base current. Infinitely-variable setting of pulse time and pause time. 8-pole remote control cable.Article no. .................76116380

Foot switch7-pole aircooled.Article no. ...................78815016

7-pole watercooled.Article no. ...................78815015

Foot switch FTFInfinitely-variable adjustment of current adjustment range.Adjustment of current andstart/stop function. Remotecontrol cable, 8-pole and 6-pole.Article no. ...................78815010

Remote control kit for MWF 1011/21Article no. ...................78861182

Remote control FSLPocket remote control unit.8-pole remote control cable.Article no. .................76116382

Remote control FSJPocket remote control unit, metal.8-pole remote control cable. Article no. ...................76116343

Remote controls for KMX, Flex XMA and Sigma2 potmeters, 8-pole plug; For MIG/MAG adjustment Article no ..................78815028

1 potmeter, 8-pole plug; For MMA adjustmentArticle no ..................78815029

Chemicals

Spray paintOriginal Migatronic spray paint

Dark green:Article no. .................99311003

Green:Article no. .................99311004

Grey:Article no. .................99311005


Remote controls for Pi1 potmeter, 7-pole plug; For MMA adjustmentArticle no ..................78815035

Double tap *Ar/Mix 3/8 HArticle no. ...................81963149

Gas preheater *CO2 W 21.8 x 14.1. 1 x 230V.Article no. ...................81960048

Gas welding kit *Article no. ...................81970002

Pressure regulators


Disposable non-return valveAcetylene 3/8” L Article no. .................81963121

Recyclable non-return valve (no photo)Article no. ............. 81963142 *

Disposable non-return valveOxygen 3/8 3/8” RArticle no. .................81963120

Recyclable non-return valve (no photo)Article no. ............. 81963143 *

Transition nippleCO2 cylinder Argon adjustmentArticle no. ...................81961007

Cylinder gasketAr, CO2, O2

Article no. ...................81963129

Cylinder gasketAcetyleneArticle no. .................81963139*

Argon cylinder CO2 adjustmentArticle no. ...................81961008

24 25

Fume extraction

MigAir 1000 *1 x 230 V = 0.75 kW extractionunit for wall-mounting and theunit includes a wall bracket and motor. Fitted with 3 m extraction arm with knee joint and thus occupying a minimum of space when not in use. Also available with light kit allow-ing installation of a 12 V bulb in the extraction funnel. 3 x 400 V. Article no. ...................82031039

1 x 230 VArticle no. ...................82031074

PM 300 mouthpiece *Rectangular extraction mouth-piece, 300 mm wide, with magnetic foot. For ø45 extraction hose.Article no. ...................82031002

TM 200 mouthpieceRectangular extraction mouthpiece, 200 mm wide, withmagnetic foot. For ø45 extraction hose.Article no. ...................82031001

For ø50 extraction hose.Artikelnr. .....................82031078

MigAir 841 *MigAir 841 is equipped with an automatic start/stop functionconnected to a holder on the extraction unit. Once welding hasstarted, extraction will start. The stop function is adjustable with5-25 seconds delay so as to ensure that all fume is extracted.At the same time the torch is additionally air cooled. Theautomatic stop function is energy saving and ensures a longer life of the MigAir 841. Equipped with indicator for replacement ofno-touch filter. 220 V.Article no. ............................................................................ 82031011

TM 80 mouthpieceRound extraction mouthpiece,ø80 mm with magnetic foot. For ø45 extraction hose.Article no. ...................82031003

Flexible extraction hoseFlexible hose by the runningmetre for MigAir and mouthpiece. Interior ø45 mm.Article no. ...................92570041

Adaptor *

Article no. ...................82031024

FilterFor MigAir 8841 Article no. ...................82031005


Nozzle tongsØ 12-15 mm.Article no. .................81940010

Gas nozzle cleanerSpecial gas nozzle cleaner withspring blades. Fits all gas nozzles.Article no. ...................81940012

Nozzle tongsArticle no. ...................81940028

Nozzle tongsØ 15-18 mm.Article no. .................81940011

Mitre magnetMitre magnet for 30°, 45°, 60°,75° and 90°.Retaining power 1 x 450 NArticle no. ...................81080005

Chipping hammerChipping hammer with metalhandle. 430 gm.Article no. ...................81920003

Mitre magnetMitre magnet for 30°, 45°, 60°,75° and 90°.Retaining power 1 x 300 NArticle no. .................81080003

Body chiselStandard body chisel.Made in GermanyArticle no. .................81940024

Carbon-arc torchCarbon-arc torch, K - 4000Article no. ...................81899001Carbon-arc electrodes, 6 x 305 mm. Article no. ...................81899006Carbon-arc electrodes, 8 x 305 mm. Article no. ...................81899008Carbon-arc electrodes, 10 x 305 mm. Article no. ...................81899010Carbon-arc electrodes, 13 x 305 mm. Article no. ...................81899013

Marking crayons, oilBox containing 12 pcs., whiteArticle no. .................81010015Box containing 12 pcs., yellowArticle no. .................81010016Box containing 50 pcs., soapstoneArticle no. .................81010017

Tools

Brush for stainless steel and aluminium, greenArticle no. .................81940020

Welding mirrorWelding mirror with magneticfoot and flexible arm. Dimension 70 x 80 mm. 1.5 mm thick mirror. Article no. ................... 81912201

Welding mirrorFitted on flexible arm and withball joint. Dimension 70 x 80mm. 1.5 mm thick mirror.Article no. ................... 81912202

MirrorDetachable mirror, 1.5 mm thick.Article no. ...................81912204

26 27

Torches Automig 98 - 183/223ML 150 C / ZA4 m without remote controlArticle no. .................80197179

Central connectionsCentral connection for AutomigArticle no. .................71110111Central connection for Automig XArticle no. .................71110114Central connection for Automig XEArticle no. .................71110120Central connection for Compact 120/160CArticle no. .................71110103

Stainless steel kit for Automig

1 pcs. Carbon wire liner with bronze neck liner Article no.: 80160707

1 pcs. Wire roll kit 0.8 mm Article no.: 73940039

1 pcs. Guide tube for wire liner Article no.: 26310087

1 pcs. Argon valve and manometer Article no.: 81963058

15 kg 316 LSI 0.8 mm stainless steel wire Article no.: 81843808

Complete kit Article no.: 81100121

Aluminiums kit for Automig

1 pcs. Wire liner Article no.: 80160711

1 pcs. Wire rolls kit 1.0 mm Article no.: 73940040

1 pcs. Guide tube for wire liner Article no.: 26310087

1 pcs. Argon valve and manometer Article no.: 81963058

5 pcs. Contact tips Article no.: 80130203

6 kg AIMg 5 1.0 mm Article no.: 81846710


Big Starter Kit for Automig

1 pcs. Welding helmet Article no.: 81910090

5 kg 0.8 mm mild steel wire Article no.: 81840012

1 pcs. 6 kg CO2 in cylinder Article no.: 81710001

1 pcs. CO2 pressure reducing valve and manometer Article no.: 81963060

1 pcs. Distance piece for 5 kg wire reel Article no.: 26150019


Small Starter Kit for Automig

1 pcs. Hand shield Article no.: 81910144

5 kg 0.8 mm mild steel wire Article no.: 81810012

1 pcs. 6 kg CO2 in cylinder Article no.: 81710001

1 pcs. CO2 pressure reducing valve and manometer Article no.: 81963060

1 pcs. Distance piece for 5 kg wire reel Article no.: 26150019


Migatronic has more than 30 years experience in the automotive trade. Now Migatronic’s Starter Kits make it even

easier to start welding with different types of steel.

Torches Automig XE 1989-98 180/200 AML 150 B - XEArticle no. .................80191178


Separate torch holderArticle no. .................78861164

Tool box for Automigincl. torch holder.Article no. ...................78861157

Kit for 230/V 10 A auxiliary voltage supplyfrom three-phase machines.Article no. .................78861153

Knob for adjustment of spot and interval welding facilitiesArticle no. .................18508004Knob for adjustment of current Artikelnr. ...................18508002

Torches Automig 98 - 273ML 250 Twist3 m without remote controlArticle no. ...................80197250ML 2503 m with remote controlArticle no. ...................80196250ML 2504 m without remote controlArticle no. ...................80197251ML 2504 m with remote controlArticle no. ...................80196251

Torches Automig 98 - 183/223ML 150 Twist3 m without remote controlArticle no. .................80197150ML 1503 m with remote controlArticle no. .................80196150ML 1504 m without remote controlArticle no. .................80197151ML 1504 m med fjernreguleringArticle no. .................80196151

Pull nails and discsFor welding onto the vehiclebody and used together with pull hammer.Pull nails:Article no. .................42790011discs:Article no. .................42790020

Pull hammerUsed with pull nails for the repair of minor vehicle body damage.Article no. ...................81920010

Torches Automig until 1989 180/200/250 AML 150 B - XRArticle no. ...................80191177

Torches Automig 1989-98250 A TwistML250 3 m without remote controlArticle no. .................80197250ML250 3 m with remote controlArticle no. .................80196250ML250 4 m without remote controlArticle no. .................80197251ML250 4 m with remote controlArticle no. .................80196251

Electronic control box MPS 4TF with automatic spot welding and interval welding facilities and possibility of using Dialog torch.Article no. ...................76116982

Electronic control box UPSwithout automatic spot welding and interval welding facilities. Article no. ...................76116984

28 29

Trouble-free TIG welding requires a correctly-ground Tungstenelectrode. Grind the electrode with a fine-grained diamond disc which is designed for grinding Tungsten electrodes. Grinding method and angle will depend on individual preferences.

For special requests for delivery of Tungsten electrodes in non-standard lengths (or ground electrodes): please contact Migatronic.

Tungsten grinder Green Pointer X2DK: Article no. ...................82036184Export with Schuko plug Article no. ...................82036170

Electrode holderFor Green Pointer X2Article no. ...................82036172

Filter for Green Pointer X2

Article no. ...................82036179

Diamond discFor Green Pointer X2, ø 40 mmArticle no. ...................82036171

Eletrode clampsFor Green Pointer X2.ø 1.0 mmArticle no. ...................82036173ø 1.6 mmArticle no. ...................82036174ø 2.0 mmArticle no. ...................82036175ø 2.4 mmArticle no. ...................82036176ø 3.2 mmArticle no. ...................82036177ø 4.0 mmArticle no. ...................82036178

Tungsten recommendationsArticle no. ...................52179133

Diameterx standardlength

1,0 x 175 mm

1,6 x 175 mm

2,0 x 175 mm

2,4 x 175 mm

3,2 x 175 mm

4,0 x 175 mm

4,8 x 175 mm

Green ren Article no.

80360021

80360022

80360024

80360026

80360027

Black 1% La Article no.

80360041

80360042

80360043

80360044

80360045

80360047

Grey 2% Ce Article no.

80360051

80360052

80360053

80360054

80360055

80360056

Turquoise WS2 Article no.

80360070

80360071

80360072

80360073

Blue 2% La Article no.

80360091

80360092

80360093

80360094

80360095

80360096

Gold 1,5 % La Article no.

80361191

80361192

80361193

80361194

80361195

80361196

80361197

Super BlueWS 2Article no.

80361371

80361372

80361374

80361376

80361377

80361378


Spare parts kit for Automig 183/223 (ML 150)Swan neck Number: 1 pcs. Article no.: 80151202Gas nozzle Number: 5 pcs. Article no.: 80140023Contact bush Number: 5 pcs. Article no.: 80110020Retaining spring Number: 5 pcs. Article no.: 80100021Contact tip 0.8 Number: 25 pcs. Article no.: 80130202Wire liner, blue Number: 2 pcs. Article no.: 80160521Spare parts box Number: 1 pcs. Article no.: 81100211Order form Number: 1 pcs. Article no.: 50129160Complete kit Article no.: 81100223

Spare parts kit for Automig 273/MIG 305 (ML 250)Swan neck Number: 1 pcs. Article no.: 80151302Gas nozzle Number: 5 pcs. Article no.: 80140601Contact bush Number: 5 pcs. Article no.: 80110601Retaining spring Number: 5 pcs. Article no.: 80100600Contact tip 0,8 Number: 10 pcs. Article no.: 80130202Contact tip 1,0 Number: 10 pcs. Article no.: 80130203Wire liner, blue Number: 2 pcs. Article no.: 80160521Spare parts box Number: 1 pcs. Article no.: 81100211Order form Number: 1 pcs. Article no.: 50129160Complete kit Article no.: 81100224

Supplement to TIG starter kit1 pcs. Argon in 12 l cylinder (2,4 m3). Article no.: ................ 81711000

10 kg AIMg5, 2.4 x 1000 mm for aluminium welding rod. Article no.: ................ 81856724

5 kg Miga KV2 2.5 x 1000 mm for mild steel welding rod.Article no.: ................ 81850009


30 31

Quick releaseWater with valve, ø 8 mm Article no. ...................43129008




Quick releaseGas, ø 6 mm

Article no. ...................43120025

Water stoppers Ø 9.5 mm for TIG hoses BlueArticle no.. ................45050339RedArticle no.. ................45050340

Ø 11.2 mm for MIG hosesBlueArtikelnr. ...................45050341RedArticle no.. ................45050342

Quick release, plasmaArticle no. .................43120048

Quick release, plasmaArticle no. ...................43120047

Quick releases

Quick releaseWater, ø 6 mmArticle no. ...................43120015

Quick releaseGas, ø 6 mmArticle no. ...................43120008

Quick releaseWater, SL connector ø 5 mmArticle no. ...................43120007

Quick releaseWater, ø 6 mmArticle no. ...................43120003

Quick releaseGas, 1/8”Article no. ...................43120012

Quick releaseWater SLST ø 8 mmArticle no. ...................43120017

Quick releaseWater with valve ø 8 mmArticle no. ...................43120016



Quick releaseGas, 1/8”Article no. ...................43120027


Quick release femaleFor pressure regulatorsArticle no. ...................43120026

32 33

Square mm

Length

3 m

5 m

10 m

15 m

20 m

25 m

16

80511603

80511605

80511610

25

80512503

80512505

80512510

80512515

80512520

80512525

35

80513503

80513505

80513510

80513515

80513520

80513525

50

80515003

80515005

80515010

80515015

80515020

70

80517003

80517005

80517010

80517015

80517020

Square mm

Length

3 m

3,5 m

5 m

10 m

15 m

20 m

25 m

30 m

16

80501603

80571002

80501605

80501610

25

80502503

80502505

80502510

80502515

80502525

35

80503503

80503505

80503510

80503515

80503520

80503525

50

80505003

80505005

80505010

80505015

80505020

80505030

70

80507003

80507005

80507010

80507015

80507020

95

80509503

80509505

80509510

80509520

(For Automig without excl. Dinse connection.)

Square mm

Length

3 m

5 m

10 m

15 m

16

80521605

80521610

80521615

25

80522503

80522505

80522510

80522515

35

80523503

80523505

80523510

80523515

50

80525003

80525005

80525010

70

80527003

80527005

80527010

80527015

Fitted with Dinse connection plug and socket

Approved extension cables for electrode cables and earth cables

Fitted with earth clamp and Dinse connection plug

Approved rubber electrode cables: acid and oil resistant

Approved rubber electrode cables: acid and oil resistant

Fitted with electrode holder and Dinse connection plug

Copper

16 mm2

25 mm2

35 mm2

100%

130

170

210

60%

145

200

245

35%

165

240

295

Copper

50 mm2

70 mm2

95 mm2

120 mm2

100%

265

325

390

460

60%

315

395

475

570

35%

380

475

580

700

Max. duty cycle in A

Welding cablesHigh-quality rubber weld-ing cables in accordance with International Standard approvals for welding.Copper (item no. is for 1 metre)

16 mm2. Article no. ..................92340016

25 mm2. Article no. ..................92340025

35 mm2. Article no. ..................92340035

50 mm2. Article no. ..................92340050

70 mm2. Article no. ..................92340070

95 mm2. Article no. ..................92340095

Please contact us if you require our assistance in calculating dimensions and lengths of cables.

Recommended dimensions/lengths of welding cablesMax. 20 m length for ordinary welding

Migatronic offers a wide range of cables, plugs and holders for the welding industry.If you do not find the required item in this catalogue, please contact us.

Separate screw for 200 A cabel 10 x 8Article no. .................80550029




Myking electrode holderInsulating rubber jacket. 2 settings with welding angle 45° or 90°. Optimum currenttransfer. Screwed type for optimum fixing of the electrode.200 A. Article no. ........80550010450 A. Article no. ........80550009600 A. Article no. ........80550008

Electrode holder“Alligator clip”300 A. Article no. ........80550037400 A. Article no. ........80550035600 A. Article no. ........80550036

Distributor socket T-pieceUsed for double connections.Cable 70Article no. ...................18120050

Separate head for Myking45°/90°. 200 A.Article no. ...................8055002745°/90°. 450 og 600 A.Article no. ...................80550028

Handle for MYKING 2, 450 A.Article no. ...................80550032

Earth clamp250 A. Article no. ........80560010400 A. Article no. ........80560011500 A. Article no. ........80560012

Spring earth clamp200 A nev. 200Article no. ...................80560001

300 A nev. 350Article no. ...................80560002

Screw-on earth clamp600 A.Article no. ...................80560009

Dinse connection plug, male0-25 mm2. Ø 10.Article no. ...................1812000635 -50 mm2. Ø 13.Article no. ...................1812000250 - 70 mm2. Ø 13.Article no. ...................1812000370 - 95 mm2. Ø 13.Article no. ...................18120004

Dinse connection socket, female10-25 mm2. Ø 10.Article no. ...................1811000135 -50 mm2. Ø 13.Article no. ...................1811000270 - 95 mm2. Ø 13.Article no. ...................18110003

Extension socket, female10-25 mm2. Ø 10.Article no. ...................1811010135 -50 mm2. Ø 13.Article no. ...................1811010250 - 70 mm2. Ø 13.Article no. ...................18110103

Magnetic earth clamp200 A. Article no. ........80560013400 A. Article no. ........80560014600 A. Article no. ........80560015

Cables for remote control units

Length

1 m interconnection for TIG unit

3 m cable

5 m cable

6 m cable

10 m cable

15 m cable

20 m cable

6 poles

Article no.

74341000

x

74341003

x

74341001

x

74341002

8 polers

Article no.

74340000

x

74340003

x

74340001

x

74340002

19 poles

Article no.

x

x

74341010

x

74341011

74341012

74341013

Bush for 9 mm cable. 200 AArticle no. .................80550030

Bush for cable. 450 A/600 AArticle no. ...................25440003

Earth clamp, 600 AArticle no. .................80560022

34 35

Storage cabinet for electrodes ES 210 *This cabinet is designed forstorage of electrodes but is also suitable for drying at low and medium temperatures. Athermostat provides infiniteadjustment of temperature up to 300°C. Shelf units consist of 3 shelves removable as 1 unit.

Primary voltage 110/220 VPower 1000 WPrimary current 4,5 AOperating temperature 50 - 300°C

Dimensions, mm W x L x H:ElectrodecomArt.ment 460 x 500 x 520Exteriordimension 560 x 640 x 740Electrode capacity 210 kgNet weight 50 kg

Article no. .................81795003

Electrode oven for electrodesand powders with controlbox ETS 260 *This cabinet is designed for ba-king electrodes and powders.The drying temperature is infi-nitely adjustable up to 500°C and the set temperature is maintained by a high-quality thermostat. The thermostat is fitted with a thermometer for visual control. The shelves are designed to provide air circula-tion within the cabinet so as to ensure an even temperature throughout the oven.A screen plate protects againstradiated heat.ETS 260 has a timer facility fordrying time and can be set atdifferent periods up to 60 hours.The control box can be orderedseparately and is easily fitted onto the ES 260 which thus becomes an ETS 260.

Primary voltage 220/380 VPower 2300 WPrimary current 10/6 AOperatingtemperature up to 500°C

Dimensions, mm W x L x H:ElectrodecomArt.ment 500 x 500 x 750Exteriordimension 640 x 640 x 980Electrode capacity 260 kgNet weight 120 kgArticle no. .................81795005

Control box *:Article no. .................81795006

Storage cabinet for electrodes and powders ES 260 *Outdoor and indoor portablestorage cabinet for electrodesand powders and drying at lowor medium temperatures. Aninfinitely adjustable (up to 300°C) thermostat ensures a constant temperature inside the cabinet. If storage of elec-trodes in original packing is required, the cabinet can be fitted with a safety thermostatkeeping the temperature be-low 70°C. The cabinet can betransported either by crane orfork-lift truck.Primary voltage 220 VPower 2300 WPrimary current 10 AOperatingtemperature up to 300°C

Dimensions, mm W x L x H:ElectrodecomArt.ment 500 x 500 x 750Exteriordimension 640 x 640 x 775Electrode capacity 260 kgNet weight 110 kg

Article no. .................81795004

Storage cabinet RTS 270 forflux-cored wires *Cabinet designed for storage of flux-cored wires on reels. The drying temperature is infi-nitely variable and is thermo-statically controlled within the range of 20-50°C. The cabinet will hold 18” and 12” wire reels and can be moved fully-loaded by crane or fork-lift truck.

Primary voltage 220 VPower 500 WPrimary current 2.3 AOperatingtemperature 20 - 50°C

Dimensions, mm:W x L x H: 910 x 510 x1500Capacity 270 kgNet weight 130 kgArticle no. ...................81795007

Wire adaptorUsed when changing fromplastic reels to metal reels.Article no. .................81899017

Adaptor for 5 kg reelUsed together with 5 kg/D200 reels.Article no. ...................45050333

Electrode ovens

Green Dryer heat-insulated boxRed *Article no. ...................81795000


Multiplug 6-pole

1. Multiplug, female: Article no. ...................17200001

2. Multiplug, male: Article no. ...................17210001

3. Multiplug housing (plastic) for fitting to machine:Article no. ...................18200002

4. Cover for multiplug (plastic):Article no. ...................18200004

5. Multiplug housing (metal) for fitting to hose:Article no. ...................18200101

6. Multiplug housing (metal) for fitting to machine:Article no. ...................18200102

7. Extension for multiplughousing (metal) for fitting to hose:Article no. ...................18200103

8. Junction box (metal):Article no. ...................74348002

Multiplug 4-pole

15. Multiplug, female:Article no. ...................17200030

16. Multiplug, male:Article no. ...................17210030

Multiplug 7-pole



Multiplug 8-pole



11. Adapter (metal):Article no. ...................74348001

Multiplug 19-pole


13. Multiplug, male: Article no. ...................17210026

14. Adapter (metal):Article no. ...................74348003

Spare parts box MIG/MAGSpare parts box with storagecomArt.ments. Excl. spare parts.Dimensions H x L x W: 57 x 340x 265 mmArticle no. ...................81100211

Order form MIG/MAGOrder form consisting of:MIG/MAG front page, ML/MVblank page, ML 130, ML 150,ML 240, ML 250, ML 300/360,MV 240, MV 450/550Article no. ...................50129100

Spare parts box TIGSpare parts box with storagecomArt.ments. Excl. spare parts.Dimensions H x L x W: 57 x 340x 265 mmArticle no. ...................11100210

Order form TIGOrder form consisting of: TIGfront page, TIG blank page, TIG100 valve, TIG 100, TIG 200/260,TIG 300, TIG 400, TIG 500Article no. ...................50129300

15

16

17

18

TIG torch brochureArticle no. ...................52125001

MIG torch brochureArticle no. ...................52125000

Spare parts box ZetaComplete with all spare partsArticle no. ...................81100239

1

2

3

4

5

6

7

8

9

10

11

12

13

14


MIGATRONIC wORldwIdE

5217

0004

G

DENMARK:

Main office:SVEJSEMASKINEFABRIKKEN MIGATRONIC A/SAggersundvej 33, 9690 FjerritslevTel. (+45) 96 500 600, www.migatronic.com

MIGATRONIC EUROPE:

United Kingdom MIGATRONIC WELDING EQUIPMENT LTD.21 Jubilee Drive, Belton Park, LoughboroughLeicestershire LE11 5XS, United KingdomTel. (+44) 01509 267499, www.migatronic.co.uk

France MIGATRONIC EQUIPEMENT DE SOUDURE S.A.R.L. Parc Avenir II 313 Rue Marcel Merieux 69530 Brignais, France Tel. (+33) 04 78 50 65 11, www.migatronic.fr

Italy MIGATRONIC s.r.l. IMPIANTI PER SALDATURA Via dei Quadri 40, 20871 Vimercate, Italy Tel. (+39) 039 9278093, www.migatronic.it

Norway MIGATRONIC NORGE AS Industriveien 1, 3300 Hokksund, Norway Tel. (+47) 32 25 69 00, www.migatronic.no

Czech Republic MIGATRONIC CZ a.s. Tolstého 451, 415 03 Teplice 3, Czech Republic Tel. (+42) 0417 570 660, www.migatronic.cz

Hungary MIGATRONIC KERESKEDELMI KFT. Szent Miklós u. 17/a, 6000 Kecskemét, Hungary Tel. (+36) 76 481 412, www.migatronic.hu

MIGATRONIC ASIA:

China SUZHOU MIGATRONIC WELDING TECHNOLOGY CO. LTD.#4 FengHe Road, Industrial Park, SuZhou, ChinaTel. 0512-87179800, www.migatronic.cn

Migatronic Automation:MIGATRONIC AUTOMATIONKnøsgårdvej 112, 9440 Aabybro Tel. (+45) 96 962 700, www.migatronic-automation.com

Migatronic Export:MIGATRONIC-EXPORT A/SAggersundvej 33, 9690 FjerritslevTel. (+45) 96 500 600, www.migatronic.com

Finland MIGATRONIC OY Tel. (+358) 0102 176 500, www.migatronic.fi

The Netherlands MIGATRONIC NEDERLAND B.V. Hallenweg 34, 5683 CT Best, The Netherlands Tel. (+31) 499 375 000, www.migatronic.nl

Italy GREENWELD s.r.l. Via Dei Quadri 40, 20871 Vimercate, Italy Tlf. (+39) 039 9278100

Sweden MIGATRONIC SVETSMASKINER AB Nääs Fabriker, Box 5015, 44 850 Tollered, Sweden Tlf. (+46) 031 44 00 45, www.migatronic.se

Germany MIGATRONIC SCHWEISSMASCHINEN GMBH Sandusweg 12, 35435 Wettenberg, Germany Tel. (+49) 641 982840, www.migatronic.de

India MIGATRONIC INDIA PRIVATE LTD.22, Sowri Street, Alandur, 600 016 Chennai, IndiaTlf. (+91 44) 223 00074 www.migatronic.com

Documents

MIGATRONIC ACCESSORIESshop.migatronic.cz/inshop/files/81910117/Prislusenstvi... · 2017. 2. 27. · 3M™ Speedglas™ 9100 Welding Shield Accessories and spare parts 50 11 05 Speedglas