Upload
ngodan
View
223
Download
0
Embed Size (px)
Citation preview
SAVIO S.p.A.
Via Torino, 25 (s.s. 25) - 10050 Chiusa S. Michele (TO) - Italy
Tel. +39 011 9643464 - Fax +39 011 9643474
e-mail: [email protected] - www.savio.it
9507.6
60 -
RE
V. 0 -
2220410
Mid
dle
Ea
st
Ca
talo
gu
e
Middle East Catalogue
English
page 001
page 033
page 069
page 081
page 085
page 133
page 147
page 153
page 159
page 169
page 173
page 177
page 187
page 195
page 221
page 249
page 255
Handles, snap latches and accessories for casement opening
Hinges, heavy-duty hinges and hinges for bottom-hung windows
Bolts and accessories
Anti-burglar devices
Tilt and turn window mechanisms and accessories
Handle, snap latches and accessories for tilt and turn
Closing handles and closing devices
Corner cleats, joints and plugs
Stay arms
Catches for bottom-hung windows
Fan light openers and accessories
Handles
Tubular door handles
Panic-device system
Sliding accessories
Tilt and sliding mechanisms
Various complementary accessories
Mid
dle
EastC
ata
logue
Family index
I
II
III
Formed more than a century ago in 1889, Savio has risen to a
position of leadership in the production of hardware for aluminium
doors and windows in Europe and throughout the world.
Today, the Savio trademark is a synonym for absolute quality and
all-round reliability in more than fifty countries in various parts of
the world. This result is assured by the most prestigious quality
certifications and the constant appreciation of customers, from
any point of view.
THE LEADING
HARDWARE COMPANY
FOR ALUMINIUM
WINDOWS AND DOORS.
IV
MORE THAN 5,600
REFERENCES IN CATALOGUE.
Products for aluminum door and window frames.
More than 5,600 references in catalogue.
Main products: hinges, tilt and turn mechanisms, handles, panic-device
systems.
Headquarters in Chiusa San Michele, Torino, Italy
V
SantAntonino di Susa, Torino, Italy - Production site
Shanghai, China - Commercial Branch
Barcelona, Spain - Production site
Trieste, Italy - Production site
VI
Panic-device-system 2,000,000 test cycles 200,000 test cycles
Tilt and turn mechanism 170 Kg 130 Kg
Hinges 2,000,000 test cycles 200,000 test cycles
Product SAVIO Competitors
R
quality in construction
VII
THE MOST PRESTIGIOUS
QUALITY CERTIFICATES
ALL OVER THE WORLD.
150 K
GE
B 2
EB
3100 K
G
110 K
G
140 K
G
170 K
G
MECHANICA
2 wings
MECHANICA
3 wings
RIBANTATRE 150 RIBANTA 4 RIBANTA 5
RIBANTA INCANTO
Gtezeichen
Drehkippbeschlge
F 100-6
SC
HL
S
SE R
U N DB E
SC
HL
G
E
()
()
Com
munic
atio
ns a
nd
servic
e
Communicate skills and exchange experience
VIII
To satisfy the needs of customers ever more closely
in this vast and constantly evolving sector, the SAVIO
marketing and communications service makes its
experience, wealth of knowledge and detailed product
information available through a range of targeted initiatives
IX
Initiatives for door and window fabricatorsSAVIO PROFESSIONAL includes a series of initiatives, proposals and services developed by
SAVIO exclusively for operators belonging to the SAVIO Selected Door and Window Fabricators
Group. From promotional instruments such as the personalised estimate folders and stickers
for centres to "tailor-made" training meetings and display units for workshops, genuine metal
structures designed to make storing products more practical.
Training
Professionalism is the result of not just experience and personal skills, but also information and
constant updating. With this in mind, SAVIO offers an extensive programme of training courses
to illustrate relevant themes and ways of approaching the problems which regularly present
themselves during everyday work.
Internet site
The SAVIO Group site is constantly evolving to offer ever new services and become one of the
most important company portals for professionals in the sector. On www.savio.it you can
quickly find data, news and trends from the aluminium door and window world, as well as
ordering and purchasing SAVIO products directly using the new e-DIRECT service.
e-directIn the e-commerce area, customers can consult and select products from the online SAVIO,
SAVIO by Pininfarina and LUIGI SAVIO catalogues. After registration, they can then order the
products chosen, consult the estimate with the sales terms, obtai confirmation of the order and
delivery date and verify progress of the order at any time, 365 days a year, with clear
instructions downloadable from the site.
Free phone numberThe SAVIO freephone number, 800 018 645, is available for all sector operators in Italy from
9:00-12:30 and 14:30- 17:00, Monday to Friday for requests for technical service; for the
worldwide market the e-mail address: [email protected] .
No request is ignored. Complex requests are communicated to the specific technical
department for guaranteed rapid and competent answers.
is available
DocumentationTo provide the customer with detailed documentation, SAVIO produces a series of continuously
updated publications on the latest market trends, regulations, technical and application
solutions and products. From catalogues to instruction manuals, guides and a choice of
interactive video catalogues on CD-ROM, SAVIO offers operators publications packed with
clear and rapid to consult information.
Sales networkThe visit to the customer's premises is one of the most important before and after sales
services offered by SAVIO to provide the most appropriate level of consultancy. The national
and international network of technical sales representatives covers the whole world ever more
effectively. SAVIO makes the services of its technical team available to assess the situation
and, together with the operator, identify the most interesting solutions, guiding him in his choice
of the most appropriate components for the specific functions required.
Beauty and toughness in respect of the environment
High standards of surface finishes are vital for ensuring the long-term durability and good
resistance to weather of the product.
In SAVIO all surface finishes and treatments are carried out so as to ensure the highest
possible quality possible today as shown by the quality markings obtained by the Group.
The most stringent inspection systems are used to ensure this result.
All technologies are with low impact on the environment thanks to a careful selection of the
materials used for the treatments and exact designing of the equipment also in terms of air
cleaning.
Finishing table
X
Finishing
codeDescription
C mill finished
F anodized silver
NE electrolytically anodized black colour
OTT polished solid brass
U anodized light bronze
ZE electrolytically anodized coffee colour
.74 black
.75 ivory
.75/A ivory with ivory facing plate
.78 white
.78/B white with white facing plate
.79 telegrey (RAL 7047)
.80 metallized grey
.81 traffic grey (RAL 7043)
.82 pearl grey
.83 metallized green
.85 light blue
.86 light green
.90 galvanized silver
.91 galvanized gold
B.SA satin-finished white RAL powder coated
BL10 matte black powder coated
BL25 25 gloss black powder coated
BR5 dark bronze powder coated
BW21 ice white powder coated
GREY silver RAL powder varnish
HL bright gold
1013 ivory RAL powder coated
1015 dark ivory RAL powder coated
1247 dark brown powder coated
3001 signal red RAL powder coated
3003 ruby red RAL powder coated
Finishing
codeDescription
6002 leaf green RAL powder coated
6005 green RAL powder coated
6029 mint green RAL powder coated
7016 anthracite grey RAL powder coated
7032 pebble grey RAL powder coated
7035 light grey RAL powder coated
7047 light silver RAL powder coated
8017 brown RAL powder coated
8019 coffee RAL powder coated
8077 dark brown RAL powder coated
9001 cream RAL powder coated
9005 black RAL powder coated
9010 white RAL powder coated
9016 traffic white RAL powder coated
SILV silver powder coated
1013/A ivory RAL powder coated with ivory facing plate
9010/B white RAL powder coated with ivory facing plate
9010W pure white RAL powder coated
BR801 marbled brown
GR217 dark marble grey
GR50 green textured
GR51 brown textured
GR606 marbled green
RD501 marbled red
WT005 gothic white
PVD H bright gold pvd treated
PVD X satin steel pvd treated
XL anodized polished stainless steel
XSD satin steel
P polished stainless steel
S satin finished stainless steel
INDEX
XI
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
026 222 Snap-release sliding lateral handle 0,148 10
026.708 222 Keeper for art. 026 0,05 20
806 148 Right hand front-fixed closing handle TAVELDUE 0,155 10
806.1 148 Left hand front-fixed closing handle TAVELDUE 0,155 10
807 149 Front-fixed closing handle MULTI 0,095 10
808 150 Front-fixed closing handle TRAGETTA 0,07 20
809 150 Open/closed signal for art. 808 ROSSOVERDE 0,032 10
809.801 150 Emergency key for outside opening 0,035 20
816 149 Front-fixed closing handle to apply KILTDUE 0,188 20
870.1 2 (pat.) Handle for casement opening MANON 0,55 20
870.2 2 (pat.) Handle for casement opening MANON 0,55 20
870.753 3 (pat.) Handle for casement opening with safety cylinder MANON 0,515 10
870.754 3 (pat.) Handle for casement opening with safety cylinder MANON 0,515 10
870.755 4 (pat.) Handle for casement opening without handle MANON 0,35 10
870.756 4 (pat.) Handle for casement opening without handle MANON 0,35 10
870.802 4 / 138 Stiffening snap 0,003 200
870.802W 4 / 138 Stiffening snap 0,003 200
872 5 (pat.) Handle for casement opening MANON 0,395 20
872.751 5 (pat.) Handle for casement opening with safety cylinder MANON 0,39 10
872.752 5 (pat.) Handle for casement opening without handle MANON 0,28 10
873.1 134 (pat.) Handle for tilt and turn MANON 0,53 5
873.2 134 (pat.) Handle for tilt and turn MANON 0,53 5
873.753 135 (pat.) Handle for tilt and turn with safety cylinder MANON 0,56 5
873.754 135 (pat.) Handle for tilt and turn with safety cylinder MANON 0,56 5
873.755 136 (pat.) Handle for tilt and turn without handle MANON 0,325 5
873.756 136 (pat.) Handle for tilt and turn without handle MANON 0,325 5
873.771 137 (pat.) Left handle, with cylinder, for tilt and turn, tilt-first function MANON 0,56 5
873.772 137 (pat.) Right handle, with cylinder, for tilt and turn, tilt-first function MANON 0,56 5
873.773 137 (pat.) Left handle, with cylinder, for tilt and turn, tilt-first function MANON 0,56 5
873.774 137 (pat.) Right handle, with cylinder, for tilt and turn, tilt-first function MANON 0,56 5
874.1 19 / 141 (pat.) Handle MANON 0,207 5
874.2 20 / 141 (pat.) Handle base with extractable grip MANON 0,18 5
874.2/7 20 / 141 (pat.) Handle base with extractable grip MANON 0,175 5
874.3 19 / 141 (pat.) Handle MANON 0,275 5
874.3/7 19 / 141 (pat.) Handle MANON 0,270 5
874.4 19 / 142 (pat.) Handle MANON 0,295 5
874.4/7 19 / 142 (pat.) Handle MANON 0,290 5
874.21 20 / 142 (pat.) Handle base with extractable grip MANON 0,38 5
874.30 178 (pat.) Double door handle in nylon MANON 0,24 10
874.31 178 (pat.) Double door handle in die-cast metal MANON 0,78 10
874.32 178 (pat.) Single handle and flat handle in die-cast metal for doors MANON 0,69 4
874.91 179 (pat.) Double door handle MANON 0,815 4
874.802 179 Escutcheon for oval cylinder 0,011 100
874.804 179 Die-cast metal escutcheon for shaped cylinder 0,025 20
874.899 180 8x140 mm Square spindle 0,09 50
875.2 138 Handle for curtain walls 0,56 5
876 6 (pat.) Handle for internal and external openings MANON 0,403 20
876.751 6 (pat.) Handle for internal and external openings with safety cylinder MANON 0,448 10
877 7 (pat.) Handle to apply APPLICA 0,41 20
877.751 7 (pat.) Handle to apply with safety cylinder APPLICA 0,465 10
877.802 8 Third closing point for flat profiles 0,04 20
877.803 8 Third closing point for stepped profiles 0,04 20
878 8 (pat.) Handle to apply APPLICADUE 0,4 20
879 9 (pat.) Handle for internal and external openings TURANDOT 0,385 20
879.2 10 (pat.) Handle for internal and external openings TURANDOT 0,42 20
879.3 10 (pat.) Handle for internal and external openings TURANDOT 0,365 20
879.20 9 (pat.) Handle in die-cast metal for shutters TURANDOT 0,47 20
879.751 10 (pat.) Handle for internal and external openings TURANDOT 0,44 10
880.1 11 (pat.) Handle for casement opening GIOCONDA 0,53 20
880.2 11 (pat.) Handle for casement opening GIOCONDA 0,53 20
880.701 11 / 140 / 180 (pat.) Lens in coloured techno-polymer 0,006 50
883.1 140 (pat.) Handle for tilt and turn GIOCONDA 0,515 5
INDEX
XII
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
883.2 140 (pat.) Handle for tilt and turn GIOCONDA 0,515 5
884 180 (pat.) Nylon double door handle GIOCONDA 0,335 10
909 12 Handle for casement opening GENOVA 0,28 20
915 13 Handle for internal and external openings FUORI 0,215 20
915.1 13 Reduced size handle for internal and external openings FUORI BASSA 0,19 20
916.803 14 Kit for external rods for art. 876/.751-915/.1 0,015 20
916.805 14 Kit for external rods for art. 876/.751-915/.1 0,015 20
916.897 14 Kit of screws and plates for art. 915/.1 0,025 40
955/36 154 Steel corner cleat SQUAL 0,106 250
955/45 154 Steel corner cleat SQUAL 0,134 250
981/36 155 T connection LINDA 0,042 50
981/45 155 T connection LINDA 0,05 50
990.1 157 Adjustment fixing device COMODO 0,02 250
996.23 156 Adjustment fixing device RENZO 0,034 100
996.24 157 Adjustment fixing device RENZO 0,028 100
996.25 157 Adjustment fixing device RENZO 0,033 100
996.26 157 Adjustment fixing device RENZO 0,017 100
996.58 156 Adjustment fixing device RENZO 0 100
1115 35 (pat.) Two-wing hinge MORSADUE+ 0,085 50
1115.1 35 (pat.) Two-wing hinge MORSADUE+ 0,087 50
1116.1 36 (pat.) Two-wing hinge for third casement MORSADUE+ 0,092 50
1118 34 Two-wing hinge PLUS 0,12 50
1118.58 34 Two-wing hinge for third casement PLUS 0,11 50
1120 34 Three-wing hinge TRIAL 0,18 20
1121 37 / 113 / 119 (pat.) Two-wing hinge MORSA+ 0,108 50
1121.1 37 / 113 / 119 (pat.) Two-wing hinge MORSA+ 0,108 50
1121.1D 37 (pat.) Two-wing hinge, preassembled right MORSA+ 0,108 50
1121.1S 37 (pat.) Two-wing hinge, preassembled left MORSA+ 0,108 50
1121D 37 (pat.) Two-wing hinge, preassembled right MORSA+ 0,108 50
1121S 37 (pat.) Two-wing hinge, preassembled left MORSA+ 0,108 50
1121.21 38 (pat.) Two-wing hinge MORSA+ 0,117 50
1122 38 (pat.) Three-wing hinge MORSA+ 0,173 20
1122.1 38 (pat.) Three-wing hinge MORSA+ 0,168 20
1122.21 38 (pat.) Three-wing hinge MORSA+ 0,187 20
1122.92 39 (pat.) Three-wing hinge for third casement MORSA+ 0,172 20
1122.200 40 (pat.) Three-wing hinge with extractable preassembled pin .
MORSA+ 0,13 20
1122.201 40 (pat.) Three-wing hinge with extractable preassembled pin .
MORSA+ 0,13 20
1123 41 (pat.) Two-wing hinge for third casement MORSA+ 0,112 50
1123D 41 (pat.) Two-wing hinge for third casement, preassembled right .
MORSA+ 0,112 50
1123S 41 (pat.) Two-wing hinge for third casement, preassembled left .
MORSA+ 0,112 50
1123.21 41 (pat.) Two-wing hinge for third casement MORSA+ 0,112 50
1124.30 42 (pat.) Two-wing hinge SUMMA 0,345 20
1124.50 42 (pat.) Two-wing hinge for third casement SUMMA 0,31 20
1138.702/7 46 7 mm step, distance between centre 53/60MR/67MR mm 0,041 10
1138.702/8 46 8,5 mm step, distance between centre 53/60MR/67MR mm 0,045 10
1138.702/10 46 10 mm step, distance between centre 53/60MR/67MR mm 0,04 10
1145/53 45 (pat.) 2-wing hinge for narrow frame MECHANICA 0,337 20
1145/60MR 45 (pat.) 2-wing hinge for narrow frame MECHANICA 0,415 20
1145/67MR 45 (pat.) 2-wing hinge for narrow frame MECHANICA 0,347 20
1145/60 43 (pat.) Two-wing hinge MECHANICA 0,317 20
1145/67 43 (pat.) Two-wing hinge MECHANICA 0,328 20
1145/79 43 (pat.) Two-wing hinge MECHANICA 0,346 20
1145/86 44 (pat.) Two-wing hinge MECHANICA 0,357 20
1145/93 44 (pat.) Two-wing hinge MECHANICA 0,356 20
1145/93SM 44 (pat.) Two symmetrics wings hinge MECHANICA 0,368 20
1145.3/53 49 (pat.) Three-wing hinge MECHANICA 0.430 10
1145.3/60 47 (pat.) Three-wing hinge MECHANICA 0,445 10
1145.3/67 47 (pat.) Three-wing hinge MECHANICA 0,456 10
1145.3/79 47 (pat.) Three-wing hinge MECHANICA 0,503 10
1145.3/86 48 (pat.) Three-wing hinge MECHANICA 0.51 10
INDEX
XIII
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
1145.3/93 48 (pat.) Three-wing hinge MECHANICA 0,513 10
1145.3/93SM 48 (pat.) Three symmetrics wings hinge MECHANICA 0,1 1
1145.702/7 63 (pat.) 7 mm step 0,052 50
1145.702/8 63 (pat.) 8,5 mm step 0,055 50
1145.702/10 63 (pat.) 10 mm step 0,06 50
1145.703/7 63 (pat.) 7 mm step 0,052 50
1145.703/8 63 (pat.) 8,5 mm step 0,055 50
1145.703/10 63 (pat.) 10 mm step 0,06 50
1145.704 58 (pat) Galvanized fixing kit 0,142 20
1145.705 58 (pat) Stainless steel fixing kit 0,142 20
1145.706 58 (pat) Galvanized fixing kit 0,148 20
1145.707 59 (pat) Stainless steel fixing kit 0,148 20
1145.708 62 (pat) Galvanized steel kit 0,073 20
1145.709 62 (pat) Stainless steel kit 0,073 20
1145.710 59 (pat) Galvanized fixing kit for thermal break profiles and stepped profiles
0,114 20
1145.711 59 (pat) Stainless steel fixing kit for thermal break profiles and stepped profiles
0,114 20
1145.712 61 (pat) Galvanized fixing kit for thermal break profiles and stepped profiles
0,154 10
1145.713 61 (pat) Stainless steel fixing kit for thermal break profiles and stepped profiles
0,154 10
1145.714 60 (pat) Galvanized fixing kit 0,21 10
1145.715 60 (pat) Stainless steel fixing kit 0,21 10
1145.801 64 Internal profile reinforcement for thermally broken profiles (14-20 mm)
0,032 40
1145.802 64 Internal profile reinforcement for thermally broken profiles (20-28 mm)
0,039 40
1145.803 64 Internal profile reinforcement for thermally broken profiles (28-35 mm)
0,042 40
1145.804 64 Internal profile reinforcement for thermally broken profiles (35-42 mm)
0,048 40
1145.805 61 (pat.) Counterplate width adapter 0,024 100
1145.808 64 Stainless steel internal profile reinforcement for thermally broken profiles (14-20 mm)
0,032 40
1145.809 64 Stainless steel internal profile reinforcement for thermally broken profiles (20-28 mm)
0,039 40
1145.810 64 Stainless steel internal profile reinforcement for thermally broken profiles (28-35 mm)
0,042 40
1145.811 64 Stainless steel internal profile reinforcement for thermally broken profiles (35-42 mm)
0,048 40
1146/59 50 (pat.) Two-wing hinge MECHANICA 0,312 20
1146/62.5 50 (pat.) Two-wing hinge MECHANICA 0,32 20
1146/67 50 (pat.) Two-wing hinge MECHANICA 0,328 20
1146/74.5 50 (pat.) Two-wing hinge MECHANICA 0,341 20
1146/78 51 (pat.) Two-wing hinge MECHANICA 0,347 20
1146/84 51 (pat.) Two-wing hinge MECHANICA 0,352 20
1146/89 51 (pat.) Two-wing hinge MECHANICA 0,365 20
1146/92 52 (pat.) Two-wing hinge MECHANICA 0,36 20
1146/97 52 (pat.) Two-wing hinge MECHANICA 0,372 20
1146/104 52 (pat.) Two-wing hinge MECHANICA 0,39 20
1146.1/62.5 53 (pat.) Two-wing hinge MECHANICA 0,43 20
1146.1/84 53 (pat.) Two-wing hinge MECHANICA 0,465 20
1146.2/62 53 (pat.) Two-wing hinge MECHANICA 0,355 20
1146.3/59 54 (pat.) Three-wing hinge MECHANICA 0,432 10
1146.3/62.5 54 (pat.) Three-wing hinge MECHANICA 0,448 10
1146.3/67 54 (pat.) Three-wing hinge MECHANICA 0,456 10
1146.3/74.5 55 (pat.) Three-wing hinge MECHANICA 0,463 10
1146.3/78 55 (pat.) Three-wing hinge MECHANICA 0,475 10
1146.3/84 55 (pat.) Three-wing hinge MECHANICA 0,512 10
1146.3/89 55 (pat.) Three-wing hinge MECHANICA 0,536 10
1146.3/92 56 (pat.) Three-wing hinge MECHANICA 0,52 10
1146.3/97 56 (pat.) Three-wing hinge MECHANICA 0,544 10
1146.3/104 56 (pat.) Three-wing hinge MECHANICA 0,563 10
1146.13/62.5 57 (pat.) Three-wing hinge MECHANICA 0,614 10
1146.13/84 57 (pat.) Three-wing hinge MECHANICA 0,684 10
1146.23/62 57 (pat.) Three-wing hinge MECHANICA 0,52 10
INDEX
XIV
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
1147 65 (pat.) Hinge pivot MECHANICA 0,48 2
1151.4 68 (pat.) Pair of pivot hinges DICK 0,965 2
1151.5 68 (pat.) Pair of pivot hinges DICK 0,814 2
1151.18 68 (pat.) Pair of pivot hinges DICK 0,866 2
1160 66 Kit of concealed hinges for casement opening VOLVO 0,805 10
1160.801 66 Supplementary locking point 0,055 40
1170.4 67 Hinge KLEM 0,15 20
1180.5 67 Double-opening hinge KLEMDUE 0,26 20
1200/7 145 Mono directional gearbox MONO 0,173 5
1200/8 145 Mono directional gearbox MONO 0,173 5
1201/7 23 Bi-directional movement mechanism DUO 0,19 20
1201/8 23 Bi-directional movement mechanism DUO 0,19 20
1203/7 145 Mono directional gearbox MONO 0,230 5
1203/8 145 Mono directional gearbox MONO 0,23 5
1204/7 23 Bi-directional movement mechanism DUO 0,240 10
1204/8 23 Bi-directional movement mechanism DUO 0,24 10
1206/1 167 (pat.) Folding opener SINTESI 0,2 10
1206/2 167 (pat.) Folding opener SINTESI 0,27 10
1206.1/1 167 (pat.) Releasable folding opener SINTESI 0,205 10
1206.1/2 167 (pat.) Releasable folding opener SINTESI 0,275 10
1210/7 91 / 99 / 145 Mono directional gearbox for RIBANTA 5 MONO 0,200 5
1211.801 24 Adapter for special rod 0,009 40
1211/7 24 Bi-directional movement mechanism DUO 0,240 20
1243.599 5 / 139 Loose grip handle 0,086 1
1243.704 105 / 109 / 114 / 120 / 125 / 129 /
139
Handle connection piece 0,04 10
1243.710 124 / 128 / 252
Locking piece 0,026 5
1243.721 17 / 104 / 108 / 113 / 119 / 124 / 128 /
252
Adjustable keeper 0,026 40
1243.721W 91 / 99 Adjustable keeper 0,027 40
1243.730 104 / 108 (pat.) Screw-hinge kit for internally flush profiles . 0,37 5
1243.750 139 Handle for tilt and turn 0,395 5
1243.790 252 Upper corner drive 0,124 10
1243.816 104 / 108 Screw-hinge kit for secondary casement 0,422 5
1243.830/8 76 / 104 / 108 / 113 / 119 / 125 / 129
Clamp-bolt 0,06 20
1243.899 139 Spacer for art. 1243.750 0,008 80
1246.832 105 / 109 / 114 / 120 / 124 / 128
Hinge-side supplementary closing point 0,05 40
1246.832W 91 / 99 Hinge-side supplementary closing point 0,05 40
1246.835 82 / 105 / 109 / 114 / 120 / 125 /
129
Anti-burglar device 0,078 40
1246.838 105 / 109 / 114 / 120 / 125 / 129
Anti-burglar device 0,082 40
1307.1 163 Adjustable multiposition arm MARCO INOX 0,237 20
1309 163 Window-holder arm stay FERMO 0,141 20
1312 164 Window-holder arm stay NCORA 0,21 20
1330.801 160 Height adjustment device 0.066 10
1330HD/20 160 Stay arm for top hung window, length of 20 (508 mm) 0.594 10
1330HD/24 160 Stay arm for top hung window, length of 24 (609,6 mm) 0.686 10
1330HD/28 160 Stay arm for top hung window, length of 28 (711,2 mm) 0.800 10
1330SH/14 162 Stay arm for side hung window, length of 14 (355,6 mm) 0.396 10
1330SH/16 162 Stay arm for side hung window, length of 16 (406,40 mm) 0.439 10
1330ST/14 161 Stay arm for top hung window, length of 14 (355,6 mm) 0.380 10
1330ST/16 161 Stay arm for top hung window, length of 16 (406,40 mm) 0.420 10
1341 164 (pat.) Releasable arm stay PIOVRATRE 0,13 20
INDEX
XV
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
1343.4 105 / 109 / 114 / 120 / 125 / 129 /
165
Damping-effect opening limiter arm stay 0,175 10
1343.4 125 / 129 / 165
Damping-effect opening limiter arm stay 0,175 10
1344 166 (pat.) Releasable arm stay PIOVRADUE 0,162 20
1344.4 166 (pat.) Releasable arm stay PIOVRADUE 0,155 20
1345 166 Releasable arm stay for bottom hung casement 0,113 20
1357 170 (pat.) Universal catch DOPPIO 0,05 50
1360 170 Universal catch LUCCIO 0,056 20
1370.1 171 (pat.) Catch to be clamped RICIRCOLO 0,06 50
1390.1 171 (pat.) Clamp-in catch REGOLO 0,086 50
1404 24 / 78 / 105 / 109 / 114 / 120 / 125 /
129
Keeper 0,024 100
1410.701 24 Support 0,015 100
1411.1 78 Keeper 0,025 50
1414 25 / 79 / 105 / 109 / 114 / 120 / 125 /
129
Adjustable keeper 0,04 200
1414W 25 / 79 / 91 / 99
Adjustable Keeper 0,04 200
1414.1W 25 / 79 / 91 / 99
Adjustable Keeper 0,04 200
1415 25 / 80 / 105 / 109 / 114 / 120 / 125 /
129
Double keeper 0,029 100
1416.5 25 / 80 / 105 / 109 / 114 / 120 / 125 /
129
Double keeper 0,027 100
1416.5W 25 / 80 / 91 / 99
Double keeper 0,027 100
1459.3 83 (pat.) Anti-burglar device MORDE 0,128 40
1459.801 83 Fixing kit for art. 1459.3 0,055 40
1463 26 Locking piece 0,01 100
1464 26 Intermediate locking piece 0,014 100
1465 26 Terminal locking piece 0,021 100
1468 78 / 105 / 109 / 114 / 120 / 125 / 129
Sash stop device 0,03 20
1475.5 15 Internal mechanism 0,058 20
1475.6 15 Internal mechanism 0,058 20
1475.8 16 Internal mechanism 0,065 20
1475.9 16 Internal mechanism 0,062 20
1475.800 16 Pin 0,007 40
1475.801 16 Pin 0,01 40
1481 17 Connection piece 0,025 200
1481.8 17 Connection piece 0,035 200
1484.4 18 Connection piece 0,005 200
1484.7 18 Couple of connection pieces 0,025 100
1484.8 18 Couple of connection pieces 0,025 100
1485 27 Terminal rod closing piece 0,03 100
1485.8 27 Terminal rod closing piece 0,045 100
1486 28 Terminal rod closing piece 0,035 100
1486.8 28 Terminal rod closing piece 0,050 100
1487.1 29 Adjustable terminal rod closing piece 0,037 100
1487.8 29 Adjustable terminal rod closing piece 0,055 100
1490 92 / 99 / 105 / 109 / 114 / 120 / 125 / 129 / 151
Lock BLOCAL 0,088 10
1541 70 / 105 / 108 / 113 / 119 / 124 / 128
(pat.) Clamp bolt CHIUDO 0,043 50
INDEX
XVI
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
1541.1 70 / 105 / 108 / 113 / 119 / 124 / 128
(pat.) Clamp bolt CHIUDO 0,042 50
1541.2 70 / 105 / 108 / 113 / 119 / 125 / 129
(pat.) Clamp bolt CHIUDO 0,045 50
1541.5 70 (pat.) Clamp bolt CHIUDO 0,013 50
1541.6 70 / 105 / 108 / 113 / 119 / 125 / 129
(pat.) Clamp bolt CHIUDO 0,043 50
1541.701 70 Grub screw for art. 1541/.1/.2/.3/.4/.5/.6 0,001 200
1541.800 70 / 92 / 99 / 105 / 109 / 114 / 120 / 125 / 129
Extension rod for art. 1541/.6/.7-3000.850/.851/.852/.853/.854 0,017 50
1541.801 70 / 92 / 99 / 105 / 109 / 114 / 120 / 125 / 129
Extension rod for art. 1541.1/3000.852 0,016 50
1541.802 70 Extension rod for art. 1541.2 0,017 50
1541.820 71 / 105 / 109 / 114 / 120 / 125 / 129
Punched extension rod for art. 1541/.1/.2/.3/.6 0,014 50
1541.823 71 Punched extension rod for art. 1541.2 0,014 50
1545 72 / 105 / 109 / 113 / 119 / 125 / 129
Clamp bolt SERRO 0,11 20
1545.1 72 / 105 / 109 / 113 / 119 / 125 / 129
Clamp bolt SERRO 0,11 20
1545.2 72 / 105 / 109 / 113 / 119 / 125 / 129
Clamp bolt SERRO 0,11 20
1545.3 72 / 105 / 109 / 113 / 119 / 125 / 129
Clamp bolt SERRO 0,11 20
1551.6 72 / 91 / 99 (pat.) Lever bolt REVERTO 0,1 20
1556/20 73 (pat.) Lever bolt SUPER REVERTO 0,17 20
1556/45 73 (pat.) Lever bolt SUPER REVERTO 0,245 20
1556/65 73 (pat.) Lever bolt SUPER REVERTO 0,32 10
1556.801 73 Extension rod 0,07 100
1557/13 74 (pat.) Lever bolt IPER REVERTO 0,115 20
1557/20 74 (pat.) Lever bolt IPER REVERTO 0,15 20
1557/45 74 (pat.) Lever bolt IPER REVERTO 0,17 20
1557/65 74 (pat.) Lever bolt IPER REVERTO 0,225 10
1572/25 75 (pat.) Clamp bolt SICURO 0.29 10
1572/50 75 (pat.) Clamp bolt SICURO 0.49 10
1572.801 75 Kit for SICURO bolts 0.060 10
1604 21 / 143 Handle SELLA 0,275 5
1605 21 / 143 Handle STAFFA 0,4 5
1606 22 / 144 Handle GINEVRA 0,19 2
1607 22 / 144 Handle GINEVRA 0,19 2
1608 22 / 144 Handle GINEVRA 0,3 2
1618 151 Single handle for art. 825 SABBIA 0,16 10
1619 151 Single handle for art. 825.6 0,17 10
1625 180 Double door handle for jamb RUMBA 0,25 10
1635 181 Double door handle for jamb SAMBA 0,35 10
1636 181 Double door handle for jamb CHARLESTON 0,32 10
1640 182 Double door handle SELLA 0,55 4
1640.899 182 8 mm square spindle 0,055 50
1641 182 Double door handle STAFFA 0,8 4
1642 183 Double door handle GINEVRA 0,56 2
1642.1 183 Double door handle GINEVRA 0,56 2
1643 184 Double door handle GINEVRA 0,56 2
1643.1 184 Double door handle GINEVRA 0,56 2
1644 185 Double door handle GINEVRA 0,65 2
1644.1 185 Double door handle GINEVRA 0,65 2
1665.801 186 Single handle attachment 0,055 20
INDEX
XVII
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
1666 186 Double door handle for transom AZALEA 0,32 10
1801.1 188 Tubular handle EXCALIBUR 0,71 2
1801.2 188 Tubular handle EXCALIBUR 0,565 2
1802.1 189 Tubular handle EXCALIBUR 0,91 2
1802.2 189 Tubular handle EXCALIBUR 0,71 2
1802.3 189 Tubular handle EXCALIBUR 0,74 2
1802.4 189 Tubular handle EXCALIBUR 1,011 2
1802.5 190 Tubular handle EXCALIBUR 0,99 2
1802.6 190 Tubular handle EXCALIBUR 0,92 2
1802.10L 191 Tubular handle EXCALIBUR 1,96 1
1802.10R 191 Tubular handle EXCALIBUR 1,96 1
1802.11L 191 Tubular handle EXCALIBUR 2,24 1
1802.11R 191 Tubular handle EXCALIBUR 2,24 1
1810.1 192 Single fastener 0,7 1
1810.2 192 Single fastener with counter-plate 0,145 1
1811.1 192 Double fastener 0,185 1
1875 256 Water drainage cover 0,003 100
1875.1 256 Water drainage cover with valve 0,004 100
2010 223 Sliding front fixed central handle to apply APPLI 0,15 20
2010.1 223 Sliding front fixed central handle to apply APPLI 0,155 20
2010.2 223 Sliding front fixed central handle to apply APPLI 0,158 20
2047 224 (pat.) Non automatic closing gear for sliding openings OMNIA 0,105 50
2048 224 (pat.) Automatic closing gear for sliding windows and doors .
OMNIA 0,105 50
2050 225 (pat.) Push and slide closing device LATO 0,17 20
2050.703 226 Straight locking piece 0,016 40
2050.708 226 Straight locking piece 0,01 40
2050.709 226 Cranked locking piece 0,01 40
2050.710 226 Cranked locking piece 0,016 40
2050.711 226 Cranked locking piece 0,01 40
2050.712 226 Cranked locking piece 0,011 40
2050.713 226 Cranked locking piece 0,014 40
2060.1 227 (pat.) Lateral closing gear for sliding mechanism LATODUE 0,12 20
2060.801 228 Kit for art. 2060 0,029 40
2060.802 228 Kit for art. 2060 0,038 40
2060.803 228 Kit for art. 2060 0,032 40
2060.804 228 Kit for art. 2060 0,025 40
2070.1 229 (pat.) Manual lateral closing gear for sliding mechanisms MODULODUE 0,12 20
2070.801 233 (pat.) Closing kit 0,04 40
2070.802 233 (pat.) Closing kit 0,04 40
2070.803 233 (pat.) Closing kit 0,032 40
2070.820 233 (pat.) Closing kit 0,04 40
2070.830 234 (pat.) Locking piece 0,02 40
2070.831 234 (pat.) Locking piece 0,015 40
2070.832 235 (pat.) Locking piece 0,02 40
2070.833 235 (pat.) Locking piece 0,02 40
2070.834 234 (pat.) Locking piece 0,02 40
2070.835 234 (pat.) Locking piece 0,02 40
2070.836 234 (pat.) Locking piece 0,02 40
2070.837 234 (pat.) Locking piece 0,013 40
2070.838 234 (pat.) Locking piece 0,02 40
2070.839 235 (pat.) Locking piece 0,02 40
2070.840 235 (pat.) Locking piece 0,02 40
2070.841 236 (pat.) Locking piece 0,02 40
2070.842 236 (pat.) Locking piece 0,02 40
2070.843 236 (pat.) Locking piece 0,02 40
2070.844 235 (pat.) Locking piece 0,02 40
2070.845 235 (pat.) Locking piece 0,02 40
2070.846 235 (pat.) Locking piece 0,02 40
2070.847 236 (pat.) Locking piece 0,02 40
2070.848 236 (pat.) Locking piece 0,02 40
2070.860 237 Keeper 0,015 40
INDEX
XVIII
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
2070.861 237 Keeper 0,022 40
2070.862 238 Keeper 0,015 40
2070.863 238 Keeper 0,015 40
2070.864 238 Keeper 0,015 40
2070.865 237 Keeper 0,015 40
2070.866 238 Keeper 0,015 40
2070.867 237 Keeper 0,015 40
2070.868 238 Keeper 0,015 40
2070.869 239 Keeper 0,02 40
2070.870 240 Blind keeper 0,022 40
2070.871 239 Keeper 0,017 40
2070.872 239 Keeper 0,013 40
2070.873 239 Keeper 0,013 40
2070.874 239 Keeper 0,014 40
2070.875 239 Keeper 0,008 40
2070.876 239 Keeper 0,009 40
2070.877 239 Keeper 0,01 40
2070.878 240 Keeper 0,022 40
2070.879 240 Keeper 0,02 40
2070.880 240 Blind keeper 0,029 40
2070.883 241 Keeper 0,010 40
2070.884 241 Keeper 0,006 40
2070.897 242 Mishandling device 0,012 50
2070.898 242 Spacer 0,005 100
2070.899 242 Spacer for art. 2070-2071-2073-2075-2076 0,02 100
2071.1 229 (pat.) Automatic lateral closing gear for sliding mechanisms MODULODUE 0,116 20
2073.1 230 (pat.) Double lateral closing gear for sliding mechanisms MODULODUE 0,322 10
2075.1 230 (pat.) Double lateral closing gear for sliding mechanisms MODULODUE 0,214 10
2076.1 231 (pat.) Double lateral closing gear for sliding mechanisms MODULODUE 0,184 10
2080 232 Pull handle MODULO 0,139 10
2080.1 232 Pull handle MODULO 0,094 10
2105 243 Fixed single-wheel roller 0,04 20
2108 243 Two-wheel fixed roller 0,085 20
2110 243 Two-wheel adjustable roller 0,12 20
2201 244 Kit for sliding mechanism 0,125 10
2202 245 Kit for sliding mechanism 1,225 1
2202.1 245 Kit for sliding mechanism 0,985 1
2301 246 (pat.) Nylon corner cleat 0,03 200
2302 246 Corner cleat in die-cast aluminium 0,051 250
2303 246 Nylon corner cleat 0,004 200
2307 246 Water-drain bushing 0,001 200
2309 247 Bi-adhesive sealing gasket 0,015 100
2311 247 Blocking kit 0,042 40
2312 247 Nylon caps 0,006 100
2315 248 Nylon guide block 0,01 100
2330 248 Nylon clip 0,001 100
2400.1 250 Kit of left hand rollers for tilt and sliding mechanisms 2,4 1
2400.2 250 Kit of right hand rollers for tilt and sliding mechanisms 2,4 1
2405/900 251 Guides and covers for tilt and sliding mechanisms 4,15 1
2405/1100 251 Guides and covers for tilt and sliding mechanisms 4,4 1
2405/1330 251 Guides and covers for tilt and sliding mechanisms 5,25 1
2405/1650 251 Guides and covers for tilt and sliding mechanisms 6,25 1
2410 252 Closing kit for tilt and sliding mechanisms SPAZIO 0,575 5
3000.4 112 (pat.) Basic kit with standard arm RIBANTA 4 0,8 5
3000.5 112 (pat.) Basic kit with short arm RIBANTA 4 0,62 5
3000.6 112 (pat.) Basic kit with standard arm RIBANTA 4 0,915 5
3000.7 112 (pat.) Basic kit with short arm RIBANTA 4 0,735 5
3000.731 112 / 118 (pat.) RH hinge kit for RIBANTA 4 0,325 5
3000.732 118 (pat.) Left transformation kit for RIBANTA 4 0,1 5
3000.733 112 / 118 (pat.) RH hinge kit for RIBANTA 4 0,325 5
3000.734 112 / 118 (pat.) Kit of LH hinges for RIBANTA 4 0,325 5
3000.739 112 / 118 Non-handed hinge Kit for RIBANTA 4 0,38 5
INDEX
XIX
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
3000.740 112 / 118 Non-handed hinge Kit for internally flush profiles for RIBANTA 4 0,39 5
3000.742 112 / 118 LH transformation hinge pivot for tilt and turn 0,07 5
3000.745 112 / 118 Non-handed hinge Kit for RIBANTA 4, for internally flush profiles with 4 mm teeth.
0,382 5
3000.800 113 / 119 Locking piece 0,025 40
3000.820 104 / 108 / 113 / 119
Kit for vertical supplementary locking points 0,15 5
3000.830 113 / 119 (patented) Clamp in hinge kit for casement alongside RIBANTA 4 0,305 5
3000.841 104 / 108 / 113 / 119 / 124 / 128
Lower bolt 0,12 10
3000.850 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,065 20
3000.851 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,062 20
3000.852 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,055 20
3000.853 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,058 20
3000.854 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,065 20
3000.896 76 / 104 / 108 / 113 / 119 / 124 / 128
Vertical clamp bolt 0,05 20
3001 118 (pat.) Basic kit with standard arm RIBANTA 4 0,815 5
3001.1 118 (pat.) Basic kit with short arm RIBANTA 4 0,635 5
3001.6 118 (pat.) Basic kit with standard arm RIBANTA 4 0,915 5
3001.7 118 (pat.) Basic kit with short arm RIBANTA 4 0,735 5
3001.10 118 (pat.) Basic kit with standard arm and vertical lateral fulcrum, tilt-first function
RIBANTA 4 0,815 5
3001.11 118 (pat.) Basic kit with short arm and vertical lateral fulcrum, tilt-first function
RIBANTA 4 0,635 5
3001.950 118 Mounting jig 0,125 1
3010 124 (pat.) Basic kit with standard arm and right concealed hinges RIBANTA INCANTO 1,250 5
3010.1 124 (pat.) Basic kit with standard arm and left concealed hinges RIBANTA INCANTO 1,250 5
3010.3 124 (pat.) Basic kit with short arm and right concealed hinges RIBANTA INCANTO 1,150 5
3010.4 124 (pat.) Basic kit with short arm and left concealed hinges RIBANTA INCANTO 1,150 5
3010.820 124 / 128 Kit for vertical supplementary locking points 0,245 5
3010.950 124 / 128 Positioning jig 0,02 1
3011 128 (pat.) Basic kit with standard arm and right concealed hinges, for tilt-first function
RIBANTA INCANTO 1,250 5
3011.1 128 (pat.) Basic kit with standard arm and leaf concealed hinges, for tilt-first function
RIBANTA INCANTO 1,250 5
3011.3 128 (pat.) Basic kit with short arm and right concealed hinges, for tilt-first function
RIBANTA INCANTO 1,150 5
3011.4 128 (pat.) Basic kit with short arm and left concealed hinges, for tilt-first function
RIBANTA INCANTO 1,150 5
3020 124 / 128 (pat.) Kit of concealed hinges for leaf alongside RIBANTA INCANTO 0,600 5
3100 104 (pat.) Basic kit with standard arm, corner drive fulcrum .
RIBANTATRE 150 0,95 5
3100.1 104 (pat.) Basic kit with short arm, corner drive fulcrum . RIBANTATRE 150 0,795 5
3100.2 104 (pat.) Basic kit with standard arm, vertical fulcrum . RIBANTATRE 150 0,95 5
3100.3 104 (pat.) Basic kit with short arm, vertical fulcrum . RIBANTATRE 150 0,78 5
3100.701 104 / 108 (pat.) Clamp in hinge kit for RIBANTATRE 150 0,455 5
3100.800 104 / 112 / 124
Supplementary arm for turn-first function 0,24 5
3100.821 26 / 104 / 108 / 113 / 119 / 124 / 128 / 139
Locking piece 0,025 40
3100.830 104 / 108 (pat.) Clamp in hinge kit for secondary casement 0,515 5
3100.950 104 / 108 / 112 / 118 / 124 / 128
Mounting jig 0,085 1
3100.951 104 / 112 Mounting jig 0,07 1
3101 108 Basic kit with standard arm, corner drive fulcrum, tilt-first function RIBANTATRE 150 0,945 5
3101.1 108 Basic kit with short arm, corner drive fulcrum, tilt-first function RIBANTATRE 150 0,795 5
INDEX
XX
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
3101.800 108 / 118 / 128
Supplementary arm, tilt-first function 0,27 5
3200.L 88 (pat.) Basic kit with left vertical fulcrum for turn-first function RIBANTA 5 0,430 5
3200.R 88 (pat.) Basic kit with right vertical fulcrum for turn-first function RIBANTA 5 0,430 5
3200.2L 88 (pat.) Right horizontal fulcrum Kit, turn-first function RIBANTA 5 0,530 5
3200.2R 88 (pat.) Right horizontal fulcrum Kit, turn-first function RIBANTA 5 0,530 5
3200.3L 88 (pat.) Right horizontal fulcrum Kit, turn-first function and fixed height of handle to 300 mm
RIBANTA 5 0,525 5
3200.3R 88 (pat.) Left vertical fulcrum Kit, turn-first function and fixed height of handle to 300 mm
RIBANTA 5 0,525 5
3200.5L 88 (pat.) Basic kit with left vertical fulcrum for turn-first function (without support and hinge pivot)
RIBANTA 5 0,370 5
3200.5R 88 (pat.) Basic kit with right vertical fulcrum for turn-first function (without support and hinge pivot)
RIBANTA 5 0,370 5
3200.6L 88 (pat.) Left horizontal fulcrum Kit, turn-first function (without support and hinge pivot)
RIBANTA 5 0,530 5
3200.6R 88 (pat.) Right horizontal fulcrum Kit, turn-first function (without support and hinge pivot)
RIBANTA 5 0,530 5
3200.600L 30 (pat.) Left lateral closing Kit 0,120 40
3200.600R 30 (pat.) Right lateral closing Kit 0,120 40
3200.605L 30 (pat.) Left terminal locking piece 0,070 40
3200.605R 30 (pat.) Right terminal locking piece 0,070 40
3200.700L 89 / 90 / 97 / 98
Left bottom hinge support (weight capacity 170 Kg) 0,035 5
3200.700R 89 / 91 / 97 / 98
Right bottom hinge support (weight capacity 170 Kg) 0,035 5
3200.701 89 / 90 / 97 / 98
(pat.) Non-handed hinge kit for RIBANTA 5 (weight capacity 170 Kg)
RIBANTA 5 0,410 5
3200.708L 89 / 90 / 96 / 98
(pat.) Left reinforcement kit for hinge 3000.709 (upper part), weight capacity 140 Kg
RIBANTA 5 0,062 5
3200.708R 89 / 90 / 96 / 98
(pat.) Right reinforcement kit for hinge 3000.709 (upper part), weight capacity 140 Kg
RIBANTA 5 0,062 5
3200.709 88 / 90 / 96 / 98
(pat.) Non-handed hinge kit for RIBANTA 5 (weight capacity 110 Kg) RIBANTA 5 0,250 5
3200.710L 89 / 90 / 96 / 98
Left lower support support and pin for secondary leaf hinge (weight capacity 110-140 Kg)
0,100 5
3200.710R 89 / 90 / 97 / 98
Right lower support and pin for secondary leaf hinge (weight capacity 110-140 Kg)
0,100 5
3200.740 88 / 90 / 96 / 98
Non-handed hinge kit for RIBANTA 5 (weight capacity 70 Kg.) for internally flush profiles
RIBANTA 5 0.450 5
3200.745 88 / 90 / 96 / 98
Non-handed hinge kit for RIBANTA 5 (weight capacity 70 Kg.) for internally flush profiles with 4 mm teeth
RIBANTA 5 0.450 5
3200.750L 88 (pat.) Left short arm, turn-first function RIBANTA 5 0,270 5
3200.750R 88 (pat.) Right short arm, turn-first function RIBANTA 5 0,270 5
3200.751L 88 (pat.) Left standard arm, turn-first function RIBANTA 5 0,270 5
3200.751R 88 (pat.) Right standard arm, turn-first function RIBANTA 5 0,270 5
3200.752L 88 (pat.) Left long arm, turn-first function RIBANTA 5 0,435 5
3200.752R 88 (pat.) Right long arm, turn-first function RIBANTA 5 0,435 5
3200.800L 88 (pat.) Left additional arm, turn-first function RIBANTA 5 0,170 5
3200.800R 88 (pat.) Right additional arm, turn-first function RIBANTA 5 0,170 5
3200.801 92 / 100 Anti-slam device (right + left) for standard and long arm. 0,006 40
3200.802 92 / 100 Anti-slam device (right + left) for additional arms. 0,006 40
3200.805L 91 / 99 (pat.) Left Kit including locking piece and adjustable keeper 0,065 40
3200.805R 91 / 99 (pat.) RH Kit including locking piece and adjustable keeper 0,065 40
3200.809 91 / 98 Hinge Kit for secondary leaf (weight capacity 80 Kg) 0,260 5
3200.810 91 / 99 (pat.) Intermediate closing point 0,060 40
3200.820L 90 / 98 (pat.) Left kit for 6 closing points 0,170 5
3200.820R 90 / 98 (pat.) Right kit for 6 closing points 0,170 5
3200.825L 90 / 98 (pat.) Left Kit for 8 closing points 0,095 5
3200.825R 90 / 98 (pat.) Right Kit for 8 closing points 0,095 5
3200.831 91 / 98 Non-handed hinge kit for secondary leaf (weight capacity 70 Kg) for internally flush profiles
RIBANTA 5 0.270 5
3200.835 82 / 92 / 99 Anti-burglar device 0,065 20
3200.840L 91 / 99 (pat.) Left upper support for secondary leaf hinge 0,120 5
3200.840R 91 / 99 (pat.) Right upper support for secondary leaf hinge 0,120 5
3200.850 77 / 91 / 99 Vertical clamp bolt 0,060 20
3200.851 77 / 91 / 99 Vertical clamp bolt 0,058 20
3200.852 77 / 91 / 99 Vertical clamp bolt 0,045 20
3200.853 77 / 91 / 99 Vertical clamp bolt 0,050 20
INDEX
XXI
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
3200.854 77 / 91 / 99 Vertical clamp bolt 0,060 20
3200.896 77 / 91 / 99 Vertical clamp bolt 0,045 20
3200.950 89 / 97 Accessories positioning jig 0,020 5
3200.951 89 / 97 Accessories positioning jig 0,017 5
3200.952 89 / 97 Accessories positioning jig 0,018 5
3200.953 90 / 97 Keeper positioning jig 0,018 5
3200.954 90 / 97 kit of jigs art. 3200.950 + 3200.952 + 3200.953 0,062 1
3200.955 90 / 97 Hinge drilling jig 0,055 1
3200.957 91 / 99 Hinge positioning jig 0,018 5
3201.L 96 (pat.) Basic kit with left vertical lateral fulcrum for tilt-first function RIBANTA 5 0,430 5
3201.R 96 (pat.) Basic kit with right vertical lateral fulcrum for tilt-first function RIBANTA 5 0,430 5
3201.2L 96 (pat.) Right horizontal fulcrum Kit, tilt-first function RIBANTA 5 0,530 5
3201.2R 96 (pat.) Left vertical fulcrum Kit, tilt-first function RIBANTA 5 0,530 5
3201.750L 96 (pat.) Left short arm, tilt-first function RIBANTA 5 0,270 5
3201.750R 96 (pat.) Right short arm, tilt-first function RIBANTA 5 0,270 5
3201.751L 96 (pat.) Left standard arm, tilt-first function RIBANTA 5 0,360 5
3201.751R 96 (pat.) Right standard arm, tilt-first function RIBANTA 5 0,360 5
3201.752L 96 (pat.) Left long arm, tilt-first function RIBANTA 5 0,435 5
3201.752R 96 (pat.) Right long arm, tilt-first function RIBANTA 5 0,435 5
3201.800L 96 (pat.) Left supplementary arm, tilt-first function RIBANTA 5 0,170 5
3201.800R 96 (pat.) Right supplementary arm, tilt-first function RIBANTA 5 0,170 5
3205/25 31 / 89 / 97 (pat.) 250 mm transmission rod 0,035 100
3205/40 31 / 89 / 97 (pat.) 400 mm transmission rod 0,055 100
3205/60 31 / 89 / 97 (pat.) 600 mm transmission rod 0,080 100
3205/80 31 / 89 / 97 (pat.) 800 mm transmission rod 0,105 100
3205/100 31 / 89 / 97 (pat.) 1000 mm transmission rod 0,130 100
3205/120 31 / 89 / 97 (pat.) 1200 mm transmission rod 0,150 100
3205/140 31 / 89 / 97 (pat.) 1400 mm transmission rod 0,175 100
3205/160 31 / 89 / 97 (pat.) 1600 mm transmission rod 0,210 50
3205/180 31 / 89 / 97 (pat.) 1800 mm transmission rod 0,230 50
3205/200 31 / 89 / 97 (pat.) 2000 mm transmission rod 0,255 50
3205/220 31 / 89 / 97 (pat.) 2200 mm transmission rod 0,280 50
3205/300 31 / 89 / 97 (pat.) 3000 mm transmission rod 0,380 50
3205.910 89 / 97 (pat.) 1200 mm transmission rod kit 0,200 1
3205.911 89 / 97 (pat.) 250-1000-1200 mm transmission rod kit
0,350 1
3205.912 89 / 97 (pat.) 1800 mm transmission rod kit 0,270 1
4232 257 Adjustable electrical contacts 0,045 20
4232.1 257 Adjustable electrical contacts 0,045 20
6000.1/1200 196 (pat.) Horizontal non-handed panic bar with 1 locking point BERNINI 3,86 1
6000.99/120 196 (pat.) Horizontal non-handed panic bar with 1 locking point BERNINI 3,86 1
6000.2/1200 197 (pat.) Vertical rod non-handed panic bar with 2 locking points .
BERNINI 5,36 1
6000.98/120 197 (pat.) Vertical rod non-handed panic bar with 2 locking points BERNINI 5,36 1
6000.3/1200 198 (pat.) Vertical rod non-handed panic bar with 3 locking points .
BERNINI 5,76 1
6000.97/120 198 (pat.) Vertical rod non-handed panic bar with 3 locking points BERNINI 5,76 1
6000.701 199 (pat.) Kit with horizontal supports, 1 locking point .
BERNINI 2,45 1
6000.702 199 (pat.) Kit with vertical supports, 2 locking points .
BERNINI 2,3 1
6000.703 199 (pat.) Kit with non-handed supports, 3 locking points BERNINI 2,45 1
6000.720 205 Standard vertical rods 0,67 1
6000.721 205 Vertical rods 0,81 1
6000.730 206 (pat.) Kit with top / bottom latch bolts 1,21 1
6000.735 206 (pat.) Kit with top /side latch bolts 1,27 1
6000.740 207 (pat.) Kit with side latch bolts 1,42 1
6000.751 211 (pat.) Support for horizontal latching device, with one push-pad 1,75 1
6000.752 211 (pat.) Support for vertical latching device 1,55 1
6000.807 212 Kit of keeper and spacers for vertical closings 0,080 20
6000.809 212 Kit of keeper and spacers for horizontal closings 0,110 20
6000.810 213 Additional side latching device 0,8 1
6000.820 213 Electric strike 0,42 1
INDEX
XXII
Code Page DESCRIPTION PRODUCT NAMEWeight Kg/pcs.
Pcs.
6000.840 213 Intermediate support BERNINI 1,08 1
6000.870 208 External access device, handle only 0,565 1
6000.873 208 External access device, idle handle 0,685 1
6000.874 208 External access device, idle handle 0,685 1
6000.875 209 External access device, idle handle 0,915 1
6000.876 209 External access device, idle handle 0,88 1
6000.877 209 External access device, idle handle 0,915 1
6000.879 210 External access device with reduced size handle 0,830 1
6000.880 210 Outside access device, fixed handle with knob 0,915 1
6000.899 220 Codes 6000 external handles adapter kit to use for CIRCEO antipanic device
0,125 20
6000.B/860 204 Horizontal 860 mm bar BERNINI 1,043 1
6000.B/1200 204 Horizontal 1200 mm bar BERNINI 1,41 1
6000.B/1500 204 Horizontal 1500 mm bar BERNINI 1,725 1
6100.1/1085 200 (pat.) Horizontal panic bar with 1 locking point CELLINI 2,9 1
6100.99/108 200 (pat.) Horizontal panic bar with 1 locking point CELLINI 2,9 1
6100.2/1085 201 (pat.) Vertical rod panic bar with 2 locking points .
CELLINI 4,6 1
6100.98/108 201 (pat.) Vertical rod panic bar with 2 locking points .
CELLINI 4,6 1
6100.3/1085 202 (pat.) Vertical rod panic bar with 3 locking points .
CELLINI 5,01 1
6100.97/108 202 (pat.) Vertical rod panic bar with 3 locking points .
CELLINI 5,01 1
6100.701 203 (pat.) Kit with horizontal supports, 1 locking point CELLINI 1,74 1
6100.702 203 (pat.) Kit with vertical supports, 2 locking points CELLINI 1,63 1
6100.703 203 (pat.) Kit with supports, 3 locking points CELLINI 1,81 1
6100.B/745 204 Horizontal 745 mm bar CELLINI 0,8 1
6100.B/1085 204 Horizontal 1085 mm bar CELLINI 1,05 1
6100.B/1385 204 Horizontal 1385 mm bar CELLINI 1,28 1
F6 174 (pat.) Fanlight opener NEWTON 1,043 5
F6.R 175 Cable-covering profile 0,085 10
F6.Y 175 Marking jig 0,085 1
F6.ZB 175 White cable 0,02 2
F6.ZN 175 Black cable 0,02 2
F7 174 (pat.) Adjustable fanlight opener NEWTON 1,045 5
KH 214 (pat.) Horizontal tubular panic handle CIRCEO 3,13 1
KH.11 214 (pat.) Horizontal tubular panic handle without bar CIRCEO 1,89 1
KH.2 215 (pat.) Vertical tubular panic handle CIRCEO 5,03 1
KH.21 215 (pat.) Vertical tubular panic handle CIRCEO 3,79 1
KH.3 216 (pat.) Vertical tubular panic handle CIRCEO 5,23 1
KH.31 216 (pat.) Vertical tubular panic handle CIRCEO 3,99 1
KH.AA 218 External control with handle 0,462 1
KH.BB 218 External control with handle and cylinder 0,55 1
KH.BBU 218 External control with handle and cylinder 0,55 1
KH.C 217 External control with handle and cylinder 0,838 1
KH.CS 217 External control with handle 0,673 1
KH.CU 217 External control with handle and cylinder 0,838 1
KH.E 219 External control with handle and cylinder 0,55 1
KH.F 219 Third locking point for KH.2-KH.3 0,45 1
KH.G 219 Electrical keeper 0,45 1
KH.T 220 Intermediate support 0,6 1
KH.TS 220 Main support 0,59 1
Q7.1/25 193 Tubular handle ARNO 0,45 4
Q7.1/35 193 Tubular handle ARNO 0,55 4
Q7.2/25 193 Tubular handle PIAVE 0,32 4
Q7.2/35 193 Tubular handle PIAVE 0,42 4
Q7.A 194 Attachment for single handle 0,18 8
Q7.B 194 Attachment for double handle 0,33 4
Q7.Y 194 Spanner 0,07 20
Handles, snap latches and accessories for casement opening
001
MANON Page 2-19
APPLICA Page 7
APPLICADUE Page 8
TURANDOT Page 9
GIOCONDA Page 11
GENOVA Page 12
FUORI Page 13
FUORI BASSA Page 13
SELLA Page 21
STAFFA Page 21
GINEVRA Page 22
DUO Page 23
870.1-870.2
code description finishes pcs.870.1 (patented) Handle for casement in die-cast metal or brass, dist. between centres 84.5-98
mm, 2 socket head cap screws M5x14 in black galvanized steel (for C and OTT finishes 2 socket head cap screws M5x10). PVD X, PVD H and OTT finishes packaging 5 pcs.; C finish: packaging 50 pcs.
1013, 1015, 1247, 6002, 6005, 7016, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BR801, BW21, C, GR217, GR606, GREY, OTT, PVD H, PVD X, RD501,
SILV, WT005
20
870.2 (patented) Handle for casement in die-cast metal or brass, dist. between centres 92-104 mm, 2 socket head cap screws M5x14 in black galvanized steel (for C and OTT finishes 2 socket head cap screws M5x10). PVD X, PVD H and OTT finishes packaging 5 pcs.; C finish: packaging 50 pcs.
1013, 1015, 6002, 6005, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10,
BR5, BR801, BW21, C, GR217, GR50, GR51, GR606, OTT, PVD H, PVD X, RD501, SILV,
WT005
20
Handles, snap latches and accessories for casement opening
002 Manon
870.1-870.2
870.753-870.754
code description finishes pcs.870.753 (patented) Handle for casement in die-cast metal or brass, with safety cylinder (same
keys), dist. between centres 84.5-98 mm, 2 socket head cap screws M5x14 in black galvanized steel (OTT: 2 socket head cap screws M5x10). OTT finishes packaging 5 pcs.; C finish: packaging 50 pcs.
1013, 1015, 6002, 6005, 7032, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BW21, C,
GR217, GREY, OTT, SILV
10
870.754 (patented) Handle for casement in die-cast metal or brass, with safety cylinder (same keys), dist. between centres 92-104 mm, 2 socket head cap screws M5x14 in black galvanized steel (OTT: 2 socket head cap screws M5x10). PVD X, PVD H and OTT finishes packaging 5 pcs.; C finish: packaging 50 pcs.
1013, 1015, 6002, 7032, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BR801,
BW21, C, GR217, OTT, PVD H, PVD X, SILV, WT005
10
Handles, snap latches and accessories for casement opening
003Manon
870.753-870.754
870.755-870.756
870.802 870.802W (RIB5)
code description finishes pcs.870.755 (patented) Handle for casement in die-cast metal, without grip handle (grip handle
art.1243.599), dist. between centres 84.5-98 mm, 2 socket head cap screws M5x14 in black galvanized steel.
1013, 8019, 9001, 9005, 9010, B.SA, BL10, BW21, GR217, SILV
10
870.756 (patented) Handle for casement in die-cast metal, without grip handle (grip handle art.1243.599), dist. between centres 92-104 mm, 2 socket head cap screws M5x14 in black galvanized steel (PVD X finish packaging 5 pcs.).
1013, 7035, 8019, 9005, 9010, GR217, PVD X, SILV
10
870.802 Stiffening snap in galvanized zamak for Eurogrooves profiles and NC International. 200
870.802W Stiffening snap in white galvanized zamak for Eurogrooves profiles and NC International. 200
Handles, snap latches and accessories for casement opening
004 Manon
870.755-870.756
870.802-870.802W
872
872.751872.752
code description finishes pcs.872 (patented) Handle made of die-cast metal, dist. between centres 130 mm, 2 plates and 2
cap screws M4x12 in black galvanized steel.1013, 1015, 8017, 8019, 9001, 9005, 9010,
BL10, BR5, BR801, C, GR217, GR606, RD501, SILV, WT005
20
872.751 (patented) Handle made of die-cast metal, with security cylinder (same keys), dist. betwe-en centres 130 mm, 2 plates and 2 cap screws M4x12 in black galvanized steel.
1013, 1015, 7035, 8017, 8019, 9001, 9005, 9010, BR5, SILV
10
872.752 (patented) Handle made of die-cast metal, without grip handle (grip handle art.1243.599), dist. between centres 130 mm, 2 plates and 2 cap screws M4x12 in black galvanized steel (C finish: packaging 50 pcs.).
9005, C 10
1243.599 Aluminium loose grip handle for art. 870.755/.756-872.752-873.755/.756. 1013, 7035, 9010, C, F, NE, SILV 1
Handles, snap latches and accessories for casement opening
005Manon
1243.599
872-872.751-872.752
1243.599
876
876.751
code description finishes pcs.876 (patented) Handle in die-cast metal for external and internal openings, dist. between cen-
tres 104-108 mm, 2 plates, 2 cap screws M4x14, 2 cap screws 3.9x25 and 2 galvani-zed steel nuts M4 (PVD H, PVD X finishes packaging 5 pcs.).
1013, 1015, 6005, 7032, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5, BR801, C,
GR217, GR606, PVD H, PVD X, RD501, SILV, WT005
20
876.751 (patented) Handle in die-cast metal for external and internal openings, with safety cylinder (same keys), dist. between centres 104-108 mm, 2 subscrew plates, 2 cap screws M4x14, 2 cap screws 3.9x25 and 2 galvanized steel nuts M4.
1013, 1015, 6005, 7032, 8017, 8019, 9001, 9005, 9010, B.SA, BL10, BR5, BR801, C,
GR217, GR50, GR51, GR606, SILV
10
Handles, snap latches and accessories for casement opening
006 Manon
876-876.751
877
877.751
code description finishes pcs.877 (patented) Handle to apply (14 mm travel) for external openings, in die-cast metal, 4 cap
screws 3,9x13 in galvanized steel.9005, 9010, B.SA, SILV 20
877.751 (patented) Handle to apply (14 mm travel) for external openings, in die-cast metal, with safety cylinder (same keys), 4 cap screws 3,9x13 in galvanized steel.
9005, 9010, SILV 10
Handles, snap latches and accessories for casement opening
007Applica
877 877.751
878
877.802 877.803
code description finishes pcs.878 (patented) Handle to apply (14 mm travel) for external openings, in die-cast metal, 4 cap
screws 3,9x13 in galvanized steel.1013, 9005, 9010, BL10, GR606, SILV 20
877.802 Third closing point for flat profiles, 1 locking piece in die-cast zamack, 1 through-guide, 1 keeper, 4 cap screws 3,9x13 in galvanized steel.
20
877.803 Third closing point for stepped profiles, 1 locking piece in zamak, 1 through-guide, 1 keeper, 1 spacer of 1 mm, 1 spacer of 1,5 mm and 1 spacer of 2 mm in nylon, 4 cap screws 3,9x13 in galvanized steel.
20
Handles, snap latches and accessories for casement opening
008 Applicadue
878
877.802 877.803
879
code description finishes pcs.879 (patented) Handle in die-cast metal for shutters, for external and internal openings, distan-
ce between centres 104-108 mm, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 M4 nuts in galvanized steel (PVD X and PVD H: packaging 5 pcs.; C: packaging 50 pcs.).
1013, 1015, 3003, 6005, 8017, 8019, 9001, 9005, 9010, 9016, BL10, BR5, BR801, BW21, C, GR217, GR50, GR51, GR606, PVD H, PVD
X, RD501, SILV, WT005
20
879.20 (patented) Handle in die-cast metal for shutters, distance between centres 104-108, 1 fixing device in black galvanized zamak, 4 countersunk head screws 3,9x19 in stainless steel, 2 special countersunk head screws M5 X18 in stainless steel.
9005, 9010, GR217, SILV 20
Handles, snap latches and accessories for casement opening
009Turandot
879.20
879
58 52.5 27
28
12
6.5
17
1
10
8
10
4 42
879.20
879.2
879.3
code description finishes pcs.879.2 (patented) Die-cast metal handle for shutters, for external and internal openings, centre
distances 104-108, 2 subscrew plates, 2 socket head cap screws M4x10 and 2 nuts of galvanized steel (PVD X and PVD H: packaging 5 pcs.).
1013, 1015, 6005, 7035, 7047, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BL25, BR5, BR801, GR217, GR50, GR51, GR606,
PVD H, PVD X, RD501, SILV, WT005
20
879.751 Like 879.2 but with safety lock and 1 Key. 1013, 1015, 6005, 8017, 8019, 9001, 9005, 9010, BL10, BR5, BR801, GR217, GR50, GR51,
GR606, PVD H, PVD X, RD501, SILV, WT005
10
879.3 Like 879.2 but with flat handle. 1013, 1015, 6005, 8017, 8019, 9001, 9005, 9010, BL10, BR5, BR801, GR217, GR50, GR51,
GR606, PVD H, PVD X, RD501, SILV, WT005
20
Handles, snap latches and accessories for casement opening
010 Turandot
171 1
26.5
6212
27 58
108
104
15
879.2-879.751
Machining for connection
Machining for internal mechanisms
108
171
62
12
27 39
104
15
879.3
880.1-880.2
880.701
code description finishes pcs.880.1 (patented) Handle in die-cast metal, pinion and racks in galvanized steel, dist. between
centres 84,5-98 mm, 2 socket head cap screws M5x10 and 2 subscrew plates in black galvanized steel.
1013, 8019, 9001, 9005, 9010, 9016, BL10, BR5, BR801, GR217, GR606, RD501, SILV,
WT005
20
880.2 (patented) Handle in die-cast metal, pinion and racks in galvanized steel, dist. between centres 92-104 mm, 2 socket head cap screws M5x10 and 2 subscrew plates in black galvanized steel.
1013, 1015, 8017, 8019, 9001, 9005, 9010, BL10, BR5, BR801, GR217, GR606, RD501,
SILV, WT005
20
880.701 (patented) Lens in coloured techno-polymer to apply fixing it to the handle of art. 880.1/.2-883.1/.2-884.
.74, .75, .78, .80, .82, .83, .85, .86, .90, .91 50
Handles, snap latches and accessories for casement opening
011Gioconda37
181.5
21 63
143
72.4
12
15
880.2
92
104
880.1
84.5
98
880.1-880.2
2.7
5
5
84.5
76
5.5
5.5
2
98
76
5.5
0.65
104
86
5.5
5.5
1.25
92 80 7.2
83
880.701
909
code description finishes pcs.909 Aluminium and Delrin handle, dist. between centres 130 mm, 2 subscrew plates and 2
cap screws M4x14 in black galvanized steel.1013, 3003, 6005, 8017, 9001, 9010, F, NE,
U, ZE20
Handles, snap latches and accessories for casement opening
012 Genova
909
915
915.1
code description finishes pcs.915 Aluminium and Delrin handle, for external and internal openings, dist. between centres
104-108 mm, 2 cap screws 3.9x25 in galvanized steel and 2 cap screws M4x18 in black galvanized steel.
1013, 6005, 8017, 9001, 9010, F, NE, U, ZE 20
915.1 Aluminium and Delrin reduced size handle, for external and internal openings, dist. betwe-en centres 104-108 mm, 2 cap screws 3,9x25 in galvanized steel and 2 cap screws M4x18 in black galvanized steel.
1013, 1015, 6005, 8017, 9001, 9010, F, NE, U, ZE
20
Handles, snap latches and accessories for casement opening
013Fuori - Fuori Bassa
915 915.1
915-915.1
915/.1
916.897
915 915 + 916.897
code description finishes pcs.916.897 Kit for art. 915/.1 including 2 cap screws M4x18 and 4 plates in galvanized steel. 40
916.803 kit for external rods profiles for art. 876/.751-915/.1 including 2 nylon blocks and 2 pins in galvanized steel.
20
916.805 Kit for external rods profiles for art. 876/.751-915/.1 including 2 nylon blocks and 2 pins in galvanized steel.
20
916.897 916.803 916.805
Handles, snap latches and accessories for casement opening
014
916.803 916.805915/.1
916.897
915 915 + 916.897
code description finishes pcs.1475.5 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon,
2 nylon spacers.20
1475.6 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon, 2 nylon spacers.
20
1475.51475.6
Handles, snap latches and accessories for casement opening
015
1475.5
1475.6
1475.800 1475.801
code description finishes pcs.1475.8 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon,
2 galvanized steel socket head cap screws M4x16, 2 nylon spacers.20
1475.9 Internal mechanism for art. 876/.751, 879/.2/.3/.751, 915/.1 made of aluminium and nylon. 20
1475.800 Galvanized steel pin. 40
1475.801 Galvanized steel pin. 40
1475.8 1475.9
Handles, snap latches and accessories for casement opening
016
1475.8
1475.9
1475.800-1475.801
1243.721
code description finishes pcs.1481 Connection piece in black galvanized zamak, 1 polyurethane cap, 1 nylon bushing 6-
8.200
1481.8 Connection piece in white galvanized zamak, 1 clip and 1 nylon bushing 6- 8. 200
1243.721 Adjustable keeper in black galvanized zamak, 2 preassembled grub screws M5x12 and 1 countersunk head screw M4x8 in stainless steel 304.
40
14811481.8 (RIB5)
Handles, snap latches and accessories for casement opening
017
1481
7
9 37
18,3
18
5,8
10,6
12,6
6
192,
7
1481.8
1243.721
1484.8 (RIB5)
code description finishes pcs.1484.4 Nylon connection piece. 200
1484.7 Couple of connection pieces with ventilation switch and 1 bushing 6- 8 in black nylon. 100
1484.8 Couple of connection pieces and 1 bushing 6- 8 in black nylon. 100
1484.4 1484.7 (RIB5)
Handles, snap latches and accessories for casement opening
018
1484.4
1484.71484.8
874.1-874.3-874.3/7-874.4-874.4/7
code description finishes pcs.874.1 (pat.) Handle with handle in nylon or in brass, distance between centres of 43 mm, 8 mm
square spindle and 2 cap screws M5x35 in galvanized steel (to combine with art. 1200/8, 1201/8, 1203/8 and 1204/8).
.74, .75/A, .78/B, OTT 5
874.3 (pat.) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 8 mm square spindle with a projecting part of 24.5 mm and 2 cap screws M5x35 in galvanized steel (to combine with art. 1200/8, 1201/8, 1203/8 and 1204/8).
1013, 1015, 8019, 9005, 9010, B.SA, BL10, BR5, C, GR217, GR606, GREY, PVD H, PVD
X, SILV
5
874.3/7 Like 874.3 but with 7 mm square spindle. 1013, 1015, 8019, 9005, 9010, B.SA, BL10, BR5, C, GREY, PVD H, PVD X, SILV
5
874.4 (patented) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 8 mm square spindle with projecting part of 52 mm and 2 cap screws M5x35 in galvanized steel (to combine with art. 1200/8, 1201/8, 1203/8 and 1204/8).
1013, 9005, 9010, BL10, BR5, BR801, PVD H, PVD X, SILV, WT005
5
874.4/7 Like 874.4 but with 7 mm square spindle. 1013, 1015, 8019, 9005, 9010, B.SA, BL10, BR5, C, GREY, PVD H, PVD X, SILV
5
Handles, snap latches and accessories for casement opening
019Manon
874.1
874.3-874.3/7 874.4-874.4/7
874.2-874.2/7
874.21
code description finishes pcs.874.2 (pat.) Handle base with extractable grip made of die-cast aluminium and nylon base of
the same colour of the handle, distance between centre of 43 mm, 8 mm square spindle, 2 galvanized steel cap screws M5x30 and 1 key for handle removal made of galvanized steel; dimension 10x1 mm (1 piece each box). To combine with art. 1200/8, 1201/8, 1203/8 and 1204/8.
1013, 3003, 9001, 9005, 9010, B.SA, BL25, C, OTT, PVD X, SILV
5
874.2/7 Like 874.2 but with 7 mm square spindle. 1013, 1015, 8019, 9005, 9010, B.SA, BL10, BR5, C, GREY, PVD H, PVD X, SILV
5
874.21 (patented) Handle base with extractable grip, made of brass and nylon base of the same colour of the handle, distance between centre of 43 mm, 8 mm square spindle with a projecting part of 44 mm, 2 galvanized steel cap screws M5x50 and 1 key for handle re-moval made of galvanized steel; dimension 10x1 mm (1 piece each box). To combine with art. 1200/8, 1201/8, 1203/8 and 1204/8.
1013, 8019, 9005, 9010, OTT, PVD X 5
Handles, snap latches and accessories for casement opening
020 Manon
874.2-874.2/7874.21
1604
1605
code description finishes pcs.1604 Handle in brass, distance between centres of 43 mm, 7 mm square spindle and 2
countersunk head screws M5x35 in galvanized steel (to combine with art. 1200/7 and 1201/7).
OTT 5
1605 Handle in brass, distance between centres of 43 mm, 7 mm square spindle and 2 countersunk head screws M5x35 in galvanized steel (to combine with art. 1200/7 and 1201/7).
OTT 5
Handles, snap latches and accessories for casement opening
021Sella - Staffa
16041605
1606
1607 1608
code description finishes pcs.1606 Stainless steel (AISI 304) handle, distance between centres 43 mm, square spindle 7 mm,
2 stainless steel countersunk head screws M5x45. It can be combined with mouvement mechanisms MONO (art. 1200/7) and DUO (art. 1201/7).
PVD H, S 2
1607 Stainless steel (AISI 304) handle, distance between centres 43 mm, square spindle 7 mm, 2 stainless steel countersunk head screws M5x45. It can be combined with mouvement mechanisms MONO (art. 1200/7) and DUO (art. 1201/7).
PVD H, S 2
1608 Stainless steel (AISI 304) handle, distance between centres 43 mm, square spindle 7 mm, 2 stainless steel countersunk head screws M5x45. It can be combined with mouvement mechanisms MONO (art. 1200/7) and DUO (art. 1201/7).
PVD H, S 2
Handles, snap latches and accessories for casement opening
022 Ginevra
1606 1607
1608
code description finishes pcs.1201/8 Bi-directional movement mechanism for casement opening with 8 mm backset, in black
galvanized zamak, 8 mm square hole, nylon bushings 6- 8 mm.20
1201/7 Bi-directional movement mechanism for casement opening, with 8 mm backset, in black galvanized zamak, 7 mm square hole, nylon bushings 6- 8 mm.
20
1204/8 Bi-directional movement mechanism with 16 mm backset for casement opening in black galvanized zamak, 8 mm square hole, nylon bushings 6- 8 mm.
10
1204/7 Bi-directional movement mechanism with 16 mm backset for casement opening in black galvanized zamak, 7 mm square hole, nylon bushings 6- 8 mm.
10
1201/8 1201/7
1204/8 1204/7
Handles, snap latches and accessories for casement opening
023Duo
1201/8-1201/71204/8-1204/7
1211/7 (RIB5)
1211.801 (RIB5) 1404
code description finishes pcs.1211/7 Bi-directional movement mechanism for casement opening, with 14,5 mm backset, in
black galvanized zamak, 7 mm square hole, nylon bushings 6- 8 mm.20
1211.801 Adapter for special rod in black nylon. 40
1404 Keeper in black galvanized zamak, wing nut and 1 pre-assembled countersunk head screw M5x10 in stainless steel 304.
100
1410.701 Support in zamak, 1 pre-assembled grub screw M5x6 in galvanized steel. 100
Handles, snap latches and accessories for casement opening
024 Duo
1410.701
21,5
21,5
7
21,5
21,5
12,8
61
9
9,4
12
15
168,
5
1515
5
20
14,5
20,5
1211/7
1211.801
1404
1410.701
14151416.5 1416.5W (RIB5)
code description finishes pcs.1414 Adjustable keeper in black galvanized zamak, 1 pre-assembled grub screw M5x12 in
stainless steel, 2 nylon cups.200
1414W Adjustable keeper in white galvanized zamak, 1 pre-assembled grub screw M5x12 in stainless steel, 2 nylon cups.
200
1414.1W Double adjustable keeper in white galvanized zamak, 2 pre-assembled grub screws M5x12 in stainless steel, 3 black nylon spacers (0.6 - 1 - 1.5 mm).
200
1415 Double keeper in black galvanized zamak, 2 pre-assembled grub screws M5x10 in galvanized steel.
100
1416.5 Double keeper in black galvanized zamak, 1 pre-assembled grub screw M5x10 in galva-nized steel.
100
1416.5W Double keeper in white galvanized zamak, 1 pre-assembled grub screw M5x10 in galva-nized steel.
100
1414 1414W (RIB5)
1414.1W (RIB5)
Handles, snap latches and accessories for casement opening
025
1414-1414W
13
0.6 1
1,5
48.5
20.6
1414.1W
1415
1416.5-1416.5W
1465 3100.821
code description finishes pcs.1463 Ventilation locking piece available for 3rd locking point too, in black nylon (to combine with
art. 1416.5).100
1464 Intermediate locking piece in black galvanized zamak. 100
1465 Terminal locking piece in black galvanized zamak, 1 polyurethane cap and 1 nylon bushing 6- 8.
100
3100.821 Locking piece in black galvanized zamak, 1 cup in low density polyethylene (LDPE), 1 bushing 6- 8 mm.
40
1463 1464
Handles, snap latches and accessories for casement opening
026
1463
1464
1465
1485
1485.8 (RIB5)
code description finishes pcs.1485 Black nylon terminal rod closing piece, top end in galvanized steel 8 with adjustable
nylon bushing.100
1485.8 Black nylon terminal rod closing piece, top end in galvanized steel 8 with adjustable nylon bushing, 1 nylon bushing 6- 8.
100
Handles, snap latches and accessories for casement opening
027
1485
7,
9
8,410,3
97
738
206
19,1
1873
97
1485.8
1486
1486.8 (RIB5)
code description finishes pcs.1486 Terminal rod closing piece in black galvanized zamak, 2 polyurethane caps and 1 nylon
bushing 6- 8.100
1486.8 Terminal rod closing piece in white galvanized zamak, 1 clip and 1 nylon bushing 6- 8, 1 polyurethane cap in red nylon.
100
Handles, snap latches and accessories for casement opening
028
1486
20
99 93
6,6
7,
96
10
19,1
1486.8
1487.1
1487.8 (RIB5)
code description finishes pcs.1487.1 Adjustable terminal rod closing piece in black galvanized zamak and stainless steel 430, 1
polyurethane cap and 1 nylon bushing 6- 8.100
1487.8 Adjustable terminal rod closing piece in white galvanized zamak, pre-assembled black nylon clips.
100
Handles, snap latches and accessories for casement opening
029
1487.1
1487.8
code description finishes pcs.3200.600R (patented) Right lateral closing Kit including: handle connection piece, 2 locking pieces
(RH+LH) and 2 adjustable Keepers in white galvanized zamak, premounted screws made of 304 and 430 stainless steel.
40
3200.600L (patented) Left lateral closing Kit including: handle connection piece, 2 locking pieces (RH+LH) and 2 adjustable keepers in white galvanized zamak, premounted screws made of 304 and 430 stainless steel.
40
3200.605R (patented) Right terminal locking piece in white galvanized zamak, adjustable keeper, premounted screws made of 304 and 430 stainless steel.
40
3200.605L (patented) Left terminal locking piece in white galvanized zamak, adjustable keeper, pre-mounted screws made of 304 and 430 stainless steel.
40
3200.600R (RIB5) 3200.600L (RIB5)
3200.605R (RIB5) 3200.605L (RIB5)
Handles, snap latches and accessories for casement opening
030
3200.600R-3200.600L
3200.605R-3200.605L
3205/25 3205/300 (RIB5)
code description finishes pcs.3205/25 (patented) 250 mm transmission rod in silver pre-oxidized extruded aluminum. 100
3205/40 Like 3205/25 but of 400 mm. 100
3205/60 Like 3205/25 but of 600 mm. 100
3205/80 Like 3205/25 but of 800 mm. 100
3205/100 Like 3205/25 but of 1000 mm. 100
3205/120 Like 3205/25 but of 1200 mm. 100
3205/140 Like 3205/25 but of 1400 mm. 100
3205/160 Like 3205/25 but of 1600 mm. 50
3205/180 Like 3205/25 but of 1800 mm. 50
3205/200 Like 3205/25 but of 2000 mm. 50
3205/220 Like 3205/25 but of 2200 mm. 50
3205/300 Like 3205/25 but of 3000 mm. 50
Handles, snap latches and accessories for casement opening
031
D e s c r ip tio n m m A r t. P c s . /p a c k .
2 5 0 3 2 0 5 /2 5 1 0 04 0 0 3 2 0 5 /4 0 1 0 06 0 0 3 2 0 5 /6 0 1 0 08 0 0 3 2 0 5 /8 0 1 0 0
1 0 0 0 3 2 0 5 /1 0 0 1 0 01 2 0 0 3 2 0 5 /1 2 0 1 0 01 4 0 0 3 2 0 5 /1 4 0 1 0 01 6 0 0 3 2 0 5 /1 6 0 5 01 8 0 0 3 2 0 5 /1 8 0 5 02 0 0 0 3 2 0 5 /2 0 0 5 02 2 0 03 0 0 0
3 2 0 5 /2 2 03 2 0 5 /3 0 0
5 05 0
Tra ns m is s io n ro d
3205/25 3205/300
Hinges, heavy-duty hinges and hinges for bottom-hung windows
033
PLUS Page 34
TRIAL Page 34
MORSADUE+ Page 35
MORSA+ Page 37
SUMMA Page 42
MECHANICA Page 43
VOLVO Page 66
KLEM Page 67
KLEMDUE Page 67
DICK Page 68
1118
1118.58 1120
code description finishes pcs.1118 Two-wing aluminium hinge, nylon bushings and caps, pin, counterplates and 5 counter-
sunk head screws M5x8 in stainless steel 430. Weight capacity: 2 hinges 60 Kg, 3 hinges 70 Kg.
1013, 1015, 3003, 6005, 8017, 8019, 9001, 9005, 9010, C, F, NE, U, ZE
50
1118.58 Two-wing aluminium hinge for third casement, nylon bushings and caps, pin, counter-plates and 5 countersunk head screws M5x8 in stainless steel 430. Weight capacity: 2 hinges 60 Kg, 3 hinges 70 Kg.
1013, 3003, 6005, 8017, 9001, 9005, 9010, C, F, NE, U, ZE
50
1120 Three-wing pre-assembled aluminium hinge, nylon bushings and caps, pin, counterplates and 7 countersunk head screws M5x8 in stainless steel 430. Weight capacity: 2 hinges 80 Kg, 3 hinges 90 Kg.
1013, 3003, 6005, 8017, 9001, 9010, C, F, HL, NE, U, ZE
20
Hinges, heavy-duty hinges and hinges for bottom-hung windows
034 Plus - Trial
17.5
1118
1118.58
17,5
1120
1115-1115.1
code description finishes pcs.1115 (patented) Two-wing hinge in aluminium, 2 nylon bushings, galvanized steel pin, pre-
assembled counterplates and 4 countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges Kg 60, 3 hinges Kg 70.
1013, 1015, 1247, 6005, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR801, C, F,
GR217, GR50, GR51, GR606, HL, NE, RD501, SILV, U, WT005, ZE
50
1115.1 (patented) Two-wing hinge in aluminium, 2 nylon bushings, galvanized steel pin, pre-assembled counterplates and 4 countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges Kg 60, 3 hinges Kg 70.
1013, 6005, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR801, C, F, GR217, GR50, GR51, GR606, GREY, HL, NE, RD501, SILV, U,
WT005, ZE
50
Hinges, heavy-duty hinges and hinges for bottom-hung windows
035Morsadue+
453
45
93
1
2.5
1115
1115.1
1116.1
code description finishes pcs.1116.1 (patented) Two-wing hinge in aluminium for third casement, 2 nylon bushings, galvanized
steel pin, pre-assembled counterplates and 4 countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges Kg 60, 3 hinges Kg 70.
1013, 1015, 6005, 8017, 8019, 9001, 9005, 9010, 9016, BL10, BR5, BR801, C, F, GR217,
GR50, GR606, HL, NE, RD501, U, WT005, XSD, ZE
50
Hinges, heavy-duty hinges and hinges for bottom-hung windows
036 Morsadue+
1
2.5
4545
93 3
1116.1
1121-1121D-1121S-1121.1-1121.1D-1121.1S
code description finishes pcs.1121 (patented) Two-wing aluminium hinge, nylon bushing, pin, counterplates and 4 pre-as-
sembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 80 Kg, 3 hinges 90 Kg (PVD H, PVD X, XSD=pack. 20 pcs.).
1013, 1015, 1247, 3003, 6002, 6005, 7035, 8017, 8019, 9001, 9005, 9010, 9016, B.SA,
BL10, BR5, BR801, BW21, C, F, GR217, GR50, GR51, GR606, HL, NE, PVD H, PVD X, RD501,
SILV, U, WT005, XSD, ZE
50
1121D Like 1121 but pre-assembled right hand. 1013, 1015, 9005, 9010, B.SA, BL10, F, NE, ZE 50
1121S Like 1121 but pre-assembled left hand. 1013, 1015, 9005, 9010, B.SA, BL10, F, NE, SILV, ZE
50
1121.1 (patented) Two-wing aluminium hinge, nylon bushing, pin, counterplates and 4 pre-as-sembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 80 Kg, 3 hinges 90 Kg (PVD H, PVD X, XSD=pack. 20 pcs.).
1013, 1015, 1247, 3003, 6002, 6005, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016,
B.SA, BL10, BR5, BR801, BW21, C, F, GR217, GR50, GR51, GR606, GREY, HL, NE, PVD H,
PVD X, RD501, SILV, U, WT005, XSD, ZE
50
1121.1D Like 1121.1 but pre-assembled right hand. 1013, 6005, 7035, 8017, 8019, 9005, 9010, B.SA, BL10, BR5, F, HL, NE, SILV, ZE
50
1121.1S Like 1121.1 but pre-assembled left hand. 1013, 6005, 7035, 8017, 8019, 9005, 9010, B.SA, BL10, BR5, F, HL, NE, SILV, ZE
50
Hinges, heavy-duty hinges and hinges for bottom-hung windows
037Morsa+
1121-1121D-1121S
1121.1-1121.1D-1121.1S
1122.21
code description finishes pcs.1121.21 (patented) Two-wing aluminium hinge, nylon bushing, pin, counterplates and 4 pre-as-
sembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 80 Kg, 3 hinges 90 Kg (PVD X, XSD=pack. 20 pcs.).
1013, 1015, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BR801, C, F, GR217,
GR50, GR51, GR606, HL, NE, PVD X, SILV, U, XSD
50
1122 (patented) Three-wing preassembled aluminium hinge, nylon bushings, pins, counterpla-tes and 6 pre-assembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 90 Kg, 3 hinges 100 Kg (XSD: pack. 10 pcs.).
1013, 1015, 3003, 6002, 6005, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR801, BW21, C, F, GR217, GR606, HL, NE, RD501,
SILV, U, WT005, XSD, ZE
20
1122.1 Like 1122. 1013, 3003, 6002, 6005, 7035, 8017, 8019, 9001, 9005, 9010, 9016, BL10, BR801, BW21,
C, F, GR217, GR606, HL, NE, PVD X, RD501, SILV, U, WT005, XSD, ZE
20
1122.21 (patented) Three-wing preassembled aluminium hinge, nylon bushings, pins, counterpla-tes and 6 pre-assembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 90 Kg, 3 hinges 100 Kg (PVD X, XSD: pack. 10 pcs.).
1013, 1015, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BR801, C, F, GR217,
GR50, GR51, GR606, HL, NE, PVD X, SILV, U, XSD
20
1121.21 1122 1122.1
Hinges, heavy-duty hinges and hinges for bottom-hung windows
038 Morsa+
1121.21
1122
1122.1
1122.21
1122.92
code description finishes pcs.1122.92 (patented) Three-wing preassembled aluminium hinge for third casement, nylon bu-
shings, pins, counterplates and 6 pre-assembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 90 Kg, 3 hinges 100 Kg (PVD X=pack. 4 pcs.).
1013, 9001, 9005, 9010, 9016, BL10, BW21, C, F, HL, NE, PVD X, SILV
20
Hinges, heavy-duty hinges and hinges for bottom-hung windows
039Morsa+
1122.92
1122.200-1122.201
code description finishes pcs.1122.200 (patented) 3-wing pre-assembled hinge in aluminium, nylon bushing, pre-assembled
extractable pin, indented plates and 6 pre-assembled countersunk head screws M5x9 in stainless steel 430. Carryng capacity: 2 hinges 90 Kg., 3 hinges Kg. 100 (PVD H, PVD X, XSD: pack. 10 pcs.).
1013, 1015, 6005, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10, BR5, BR801, BW21, C, F, GR217, GR606, HL, NE, PVD H, PVD X,
RD501, SILV, U, WT005, XSD, ZE
20
1122.201 (patented) 3-wing pre-assembled hinge in aluminium, nylon bushing, pre-assembled extractable pin, indented plates and 6 pre-assembled countersunk head screws M5x9 in stainless steel 430. Weight capacity: 2 hinges 90 Kg., 3 hinges Kg. 100 (PVD H, PVD X, XSD: pack. 10 pcs.).
1013, 1015, 6005, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016, BL10, BR5, BR801, BW21, C, F, GR217, GR606, HL, NE, PVD H,
PVD X, RD501, SILV, U, WT005, XSD, ZE
20
Hinges, heavy-duty hinges and hinges for bottom-hung windows
040 Morsa+
1122.200 1122.201
1123-1123D-1123S
1123.21
code description finishes pcs.1123 (patented) Two-wing aluminium hinge for third casement, nylon bushing, pin, counterpla-
tes and 4 pre-assembled countersunk oval head screws M5x10 in stainless steel 430. Weight capacity: 2 hinges 80 Kg, 3 hinges 90 Kg (PVD H, PVD X, XSD: pack. 20 pcs.).
1013, 1015, 3003, 6005, 7032, 7035, 8017, 8019, 9001, 9005, 9010, 9016, B.SA, BL10,
BR5, BR801, BW21, C, F, GR217, GR50, GR51, GR606, HL, NE, PVD H, PVD X, RD501, SILV, U,
WT005, XSD, ZE
50
1123D Like 1123 but pre-assembled right hand. 1013, 7035, 8019, 9005, 9010, BL10, HL, NE, SILV, XSD, ZE
50
1123S Like 1123 but pre-assembled left hand. 1013, 7035, 8019, 9005, 9010, BL10, HL, NE, SILV, XSD, ZE
50
1123.21 (patented) Two-wing aluminium h