Middle East & African wireless products catalogue

Wi

re

le

ss

s

ec

ur

it

y

sy

st

em

WIRELESS SECURITY SYSTEM<Technical standard compliance approved product>

2

1

CONTENTS

Wireless Security System

Receiver SeriesRECEIVER UNIT 2RECEIVER 3～6AUDIO MESSAGE/FLASH RECEIVER 7MULTI-CHANNEL RECEIVER UNIT 8MOBILE RECEIVER 9RECEIVER UNIT 10

RepeaterREPEATER 11

TRANSMITTER SERIESCARD TYPE/PUSH BUTTON TRANSMITTER 12PUSH BUTTON WATERPROOF TRANSMITTER 13CONTACT INPUT TYPE TRANSMITTER 13SHOCK SENSOR TRANSMITTER 14TILT DETECTION TRANSMITTER 14MAGNET SWITCH TRANSMITTER 14STICK SENSOR TRANSMITTER 15WATERPROOF STICK SENSOR TRANSMITTER 15～16GLASS BREAKAGE SENSOR TRANSMITTER 16～17PENDANT/WATCH TYPE TRANSMITTER 18PENDANT TYPE WATERPROOF TRANSMITTER 18PENDANT TYPE TRANSMITTER 19ALARM PUSH BUTTON TRANSMITTER 19WATCH TYPE TRANSMITTER 20MAGNET SWITCH TRANSMITTER (ONE PIECE TYPE) 21MAGNET SWITCH TRANSMITTER (SEPARATE TYPE) 21PASSIVE SENSOR TRANSMITTER 22～23TWIN MIRROR TYPE PASSIVE SENSOR TRANSMITTER 23PASSIVE SENSOR TRANSMITTER 24MAT SWITCH TRANSMITTER 25FALLING DETECTION TRANSMITTER 25EXPLOSION PROTECTION/DRIP-PROOF FALLING DETECTION TRANSMITTER (FALLING CALL) 26FLAME SENSOR TRANSMITTER 26PHOTOELECTRIC SENSOR TRANSMITTER 27SOLAR POWER SUPPLY PHOTOELECTRIC SENSOR TRANSMITTER 28MODEL NUMBER INDEX 30

WIRELESS SECURITY SYSTEM

2

■SPECIFICATIONSModel No. RX-710 RX-740

Voltage 100V AC 50/60Hz or 10 to 30V DC

Power/current consumption

2W or 150mA max.

2.2W or 170mA max.

Coverage distance

Approx. 100m (line-of-sight distance)

Separate alarm output

Contact type: 　Dry semiconductor contact　N.O. / N.C. selectable (individually)Contact rating: 30V AC/DC 0.25A

Error output

1 circuit 4 circuitsContact type: 　Dry semiconductor contact　30V AC/DC 0.25AN.O. / N.C. selectable (collectively)

Tamper, battery exhaustion, regular transmission, environment, 4 circuits in total

Mounting position Indoor (wall mount type)Weight Approx. 600g

Appearance ABS resin (white)

■SPECIFICATIONSModel No. RX-450-SVoltage 100V AC (50/60Hz) or 10 to 18V DC

Power/current consumption 5W or 280mA

Operating frequency band

426MHz band(wireless equipment of low power security system)

Coverage distance Approx. 100m (line-of-sight distance)Antenna λ/4 whip antenna

Contact output

Alarm output　Contact type: Dry contact N.O. / N.C.

individually selectable　Contact rating: 30V AC/DC, 0.25A x 4 (CH1

to CH4)Error output　Contact type: Dry contact N.O. / N.C. col-

lectively selectable　Contact rating: 30V AC/DC, 0.25A x 3　　　　　　　　 (Tamper, battery exhaus-

tion, regular transmission)

Alarm sound

Buzzer sound: 　Beep (Rings to notify battery exhaustion)Sound volume: FixedOperation: 　Rings every 20 seconds until recovery

Allowable number of registered transmitters 30 units

Data storage function AvailableWiring Terminals

Mounting position Indoor (wall mount type)Ambient

temperature range -10ºC to +50ºC

Weight Approx. 1,100gAppearance ABS resin (white)

■EXTERNAL DIMENSIONS (UNIT: mm)

180

50.7

25

14.3

Grommet 25×10(knockout)

25

Grommet 25×10Grommet 9.5×10

(knockout: right and left available)

14.3

（23）

3-φ4 screw supported

(mounting pitch)

(mounting pitch)

132

83.5

15

170

120

Reference diagram for mounting

180

50.7

14.3

Grommet 25×10(knockout)

25

Grommet 25×10Grommet 9.5×10


14.3

（23）

3-φ4 screw supported25

(mounting pitch)

(mounting pitch)

132

83.5

15

170

120


<RX-710> <RX-740>

Grommet 25×16(knockout: top and bottom available)

99215 (mounting pitch)

240

54

165


170

Grommet 20×70 4-φ4 screw supported

Receiver SeriesRadio wave coverage of 100m from a transmitter!Guarantees an enhanced security system.

■RECEIVER UNIT RX-710 RX-740

■RECEIVER UNIT RX-450-S

RX-710/740Two types of alarm outputs are available; 1cH (RX-●710) and 4cH (RX-740).Up to 30 transmitters can be assigned into four ●groups and registered. (RX-740 only)When receiving the alarm and error signals from a ●transmitter, the receiver unit displays the channel and registration no. of the transmitter on the LCD.When receiving the battery exhaustion signal from a ●transmitter, an internal buzzer rings.The antenna can be removed. An extension antenna ●can be installed instead.Supports both 100V AC and 12V DC power sup-●plies.

Up to 30 transmitters can be assigned into four ●groups and registered.Outputs the contact of the registered group, ●channel by channel, when receiving the radio wave from each transmitter.Provides the digital display of the registration ●no. on the 7-segment LED when receiving the radio wave from each transmitter.When receiving the battery exhaustion signal ●from a transmitter, an internal buzzer rings.Designed to integrate the new type controller ●(C-602/603/606), and looks excellent if in-stalled side by side.

Contact output (Dry semiconductor contact 30V AC/DC, 0.25A)

Individual output x 4N.O. / N.C. individually selectable

Battery exhaustion alarm outputTamper output

Regular transmission error output

N.O. / N.C. collectively selectable

■EXTERNAL DIMENSIONS 　(UNIT: mm)

3

■SPECIFICATIONSModel No. RX-200A-SVoltage 100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption 5W or 280mA max.



Coverage distance Approx. 100m (line-of-sight distance)Antenna λ/4 whip antenna

Contact output

Contact type: General dry relay contact (N.O.N.C.)Contact rating: 30V AC/DC, 0.5A (resistive load)Contact operation: 　 One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)

Alarm sound

CH1: Ding-dong　CH2: Beep beep-beep beepCH3: Ring-ring　 CH4: PororonSound duration: Approx. 6 secSound volume: 0 to 75dB/1m ahead　Changeable using the sound volumeBattery exhaustion alarm: Chime rings intermittently.

Indicator

2-color LED (red and green)　Power ON: Green light ON　Battery exhaustion alarm: Green light blinks　Reception of CH1 to CH4: 　　Red light ON (synchronized to alarm output)　Lack of reception sensitivity: 　　Red light blinks (synchronized to alarm output)　Registration mode: 　　Red and green lights ON alternately.

Operation switchPower switch

Registration channel selector (internal)Cancellation switch (internal)


Wiring Terminals (AC power supply input: Plug and terminal types combined)

Mounting position Indoor (wall mount type)Ambient temperature range -10ºC to +50ºC

Weight Approx. 650gAppearance ABS resin (white)

■SPECIFICATIONSModel No. RX-200B-SVoltage 100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption 5W or 220mAOperating frequency

band426MHz band

(wireless equipment of low power security system)Coverage distance Approx. 100m (line-of-sight distance)

Antenna λ/4 whip antenna

Contact output

Contact type: 　General dry relay contact (SPDT)Contact rating: 　30V AC/DC, 0.5A (resistive load)Contact operation: 　 One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)Battery exhaustion alarm output　 Dry semiconductor contact (N.O. / N.C. collectively selectable)Regular transmission error output　 Dry semiconductor contact (N.O. / N.C. collectively selectable)

Alarm sound

CH1: Ding-dongCH2: Beep beep-beep beepCH3: Ring-ring　CH4: PororonSound duration: Approx. 6 secSound volume: 0 to 75dB/1m ahead　Changeable using the sound volumeBattery exhaustion alarm: 　Chime rings intermittently.


Data storage function Available

WiringTerminals

(AC power supply input: Plug and termi-nal types combined)



11.5

47200

120

75 (left side 40)

25 Knockout

AC cord length: 2m

Knockout

150

VOL.

ON

OFF

RX-200A



11.5

47200

120

75 (left side 40)

25 Knockout

AC cord length2m

Knockout

150

VOL.

ON

OFF

RX-200B

Up to 30 transmitters can be assigned ●into four groups and registered. Need-less to say, all 30 units can be regis-tered into one channel.To register a transmitter, simply set the ●receiver to “Registration mode” and operate the transmitter to send the radio wave signal.The alarm volume can be adjusted ●according to the location, using the volume dial on the side of the receiver, from 0 to 75dB.Receives the battery exhaustion signal ●from each transmitter, and notifies of the battery exhaustion state with blink-ing of the operation indicator and an intermittent chime corresponding with the reception channel.Both AC/DC power supply terminals ●can be used according to the location. Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet.When receiving the radio wave signal ●from a transmitter, the operation indica-tor will blink, the dry contact will be out-put, and the chime corresponding with the reception channel will ring.

Up to 30 transmitters can be assigned into four ●groups and registered.Needless to say, all 30 units can be registered into one channel.To register a transmitter, simply set the receiver to ●“Registration mode” and operate the transmitter to send the radio wave signal.The alarm volume can be adjusted according to ●the location, using the volume dial on the side of the receiver, from 0 to 75dB.Receives the battery exhaustion signal from each ●transmitter, and notifies of the battery exhaustion state with blinking of the operation indicator and an intermittent chime corresponding with the re-ception channel.Both AC/DC power supply terminals can be used ●according to the location. Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet.When receiving the radio wave signal from a trans-●mitter, the operation indicator will blink, the dry contact will be output, and the chime correspond-ing with the reception channel will ring.Equipped with a battery exhaustion alarm and ●regular transmission error outputs.Incorporates a power supply switch lock function.●When combined with a contact input type transmit-●ter, the operation mode can be selected (one-shot or retention operation).

■RECEIVER RX-200A-S

■RECEIVER RX-200B-S

Chime sound Contact outputChannel 1: Ding-dongChannel 2: 　Beep beep-beep beepChannel 3: Ring-ringChannel 4: Pororon

Alarm output (General):Dry relay contact SPDT30V AC/DC, 0.5AOne-shot operation

Chime sound Contact output

Channel 1: Ding-dongChannel 2: 　Beep beep-beep beepChannel 3: Ring-ringChannel 4: Pororon

Alarm output (General):Dry relay contact SPDT30V AC/DC, 0.5AOne-shot operation

Battery exhaustion alarm outputRegular transmission error outputDry semiconductor contact N.O. / N.C. collectively selectable30V AC/DC, 0.25A


4

■SPECIFICATIONSModel No. RX-300A-SVoltage 100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption 12W or 350mA max.

Operating frequency band 426MHz band (wireless equipment of low power security system)Coverage distance Approx. 100m (line-of-sight distance)


Contact output

General output

Contact type: Dry relay contact (N.O.N.C.)Contact rating: 30V AC/DC, 0.5A (resistive load)Contact operation: 　 One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)

Output (1)(Operates only during the outing alert)

Contact type:Dry relay contact (N.O.)Contact rating: 100V (AC) 500W max.(incandescent lamp load)Contact operation: Timer operation for reception of CH1 to CH4

Output (2)(Operates only during the outing alert)

Contact type: Dry relay contact (N.O.)Contact rating: 30V AC/DC, 0.5A (resistive load)Contact operation: Timer operation for reception of CH1 to CH4

Power output 150mA max. 12V DC

Alarm sound

During the presence alert　CH1: Ding-dong　CH2: Beep beep-beep beep　CH3: Ring-ring　CH4: Pororon　Sound duration: Approx. 6 sec　Sound volume: 0 to 75dB/1m ahead・Changeable using the sound volumeDuring the outing alert　CH1 to CH4: Peepo-peepo　Sound duration: Alarm output timer time　Sound volume: 75dB/1m ahead, fixedLoop check error sound: Beep-beep-beepBattery exhaustion alarm: Chime rings intermittently. (Only during the presence alert)

Indicator

Power indicator (green)

Power ON: ONBattery exhaustion alarm: Blinks

Channel indicator (red)

Alarm signal reception: Signal received channel ON (until recovery)Tamper signal reception: Signal received channel blinks (until recovery)Registration mode: Registered channel blinks

Alert mode indicator (green)

Outing alert mode: Outing alert indicator ONPresence alert mode: Outing alert indicator ONLoop check error: Outing and presence alert indicators ON alternately

Operation switch Power switch　　Alert mode selector　Registration channel selector (internal)　　Cancellation switch (internal)


Timer function Alarm output timer: 3 sec, 30 sec, 2 min, 5 minAlarm alert delay timer: 0, 30 sec., 1 min., 2 min. (effective only during the outing alert)

Wiring Terminals (AC power supply input: Plug and terminal types combined)Mounting position Indoor (wall mount type)

Ambient temperature range -10ºC to +40ºCWeight Approx. 700g



25

75 (left side 40)

120

200

47

11.5

在室

外出

OFF

ON

VOL.

150

Knockout

AC cord length2m

Knockout

RX-300A

■RECEIVER RX-300A-S

Up to 30 transmitters can be assigned into four groups and registered. Needless to say, all 30 units can be ●registered into one channel.To register a transmitter, simply set the receiver to “Registration mode” and operate the transmitter to send ●the radio wave signal.The alarm volume can be adjusted according to the location, using the volume dial on the side of the receiver, ●from 0 to 75dB.(The volume will be automatically set to the maximum 75dB in the outing alert setting.)Receives the battery exhaustion signal from each transmitter, and notifies the state with blinking of the chan-●nel indicator and intermittent chime corresponding with the reception channel. (Only during the presence alert)Both AC/DC power supply terminals can be used according to the location. ●Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet.Since the alert mode is switchable between the presence and outing modes, you can set the visitor chime ●when you are present and the security system when you are out.Automatically conducts a loop check (lock up check) when the outing alert is set, and notifies of an error (if ●any) by generating the check sound (beep-beep-beep) and alternately lighting the alert mode indicator. Shifts to the alert mode if no error occurs.An alert /Alarm delay function (0 sec., 30 sec., 1 min., 2 min.) is built in.●The alarm output timer is switchable between four steps. (3 sec, 30 sec., 2 min., 5 min.)●When receiving a signal from a transmitter during the outing alert mode, the indicator of the reception channel ●will blink and the memory display will appear.Power can be supplied to an external device during operation at 100V AC. (12V DC, 150mA max.)●When receiving the radio wave signal from a transmitter, the unit notifies the state with a chime corresponding ●to the reception channel and one contact output during the presence alert. During the outing alert, with the alarm sound and three types of contact output.

5

■SPECIFICATIONSModel No. RX-360Power supply 100V AC 50/60Hz 12W or 10 to 16V DC 350mA

Operating frequency band 426MHz band (wireless equipment of low power security system)Antenna λ/4 whip antenna

Coverage distance Approx. 100m (line-of-sight distance)

Alarm output

General output Contact type: Large dry relay contact (N.O.)Contact rating: 100V AC, 500W (incandescent lamp load)

Emergency/fire output

Contact type: Small dry relay contact (N.O.)Contact rating: 30V AC/DC, 0.5A (resistive load)Contact operation: 　Operates during the time set using the alarm output timer　(3 sec, 30 sec, 2 min, 5 min)　*Extended when input continuously

Intrusion output

Contact type: Dry relay contact (N.O.N.C.)Contact rating: 30V AC/DC, 0.5A (resistive load)Contact operation: 　Operates during the time set using the alarm output timer　(3 sec, 30 sec, 2 min, 5 min)

Power output 12V DC, 150mA max.

Indicator

Power indicator(green)

Power ON: ONBattery exhaustion alarm: Blinks (only during the alert)

CH indicator(red)

Alarm signal reception: Signal received CH indicator ONTamper signal reception: 　Signal received CH indicator ON *Retained until recoveryLack of reception sensitivity: 　Signal received CH indicator ON (approx. 4 sec)Registration mode: Registered channel indicator blinks

Alert mode indicator(green)

Outing alert mode: Outing alert indicator ONPresence alert mode: Outing alert indicator ONLoop check error: 　Outing and presence alert indicators ON alternately

Operation switch Alert switch　　Alert mode selectorRegistration channel selector (internal)　　Cancellation switch (internal)

Internal electronic siren

When canceled 1CH: Chime sound “Ding-dong”4CH: Alarm sound ”Peepo”

Alarm during the presence alert

1CH: Alarm sound ”Peepo”2CH: Alarm sound ”Peepo”3CH: No sound due to operation stop4CH: Alarm sound ”Peepo”

Alarm during the outing alert CH1 to CH4: Alarm sound ”Peepo”

Sound duration

Chime sound: Approx. 6 sec *Extended when input continuously　 (Note that the chime sound from the same transmitter pauses for 12 seconds.)Alarm sound: Alarm output timer setting time　(3 sec, 30 sec, 2 min, 5 min)

Sound volumeChime sound: 0 to 75dB/1m ahead　Changeable using the sound volumeAlarm sound: 75dB/1m ahead, fixed

Loop check error sound: “Beep-beep-beep”

Alert/alarm delay functionDuring the outing/presence alert:

Available (delay time: 0 (no delay), 30 sec, 1 min, 2 min)*Only alert delay function available during the presence alert


Wiring Terminals (AC power supply input: Plug and terminal types combined)Operating Temperature -10ºC to +40ºCMounting position Indoor (wall mount type)


■Alarm sound and alarm output operationOuting alert mode Presence alert mode Cancellation mode

Alarm sound Alarm output Alarm sound Alarm output Alarm sound Alarm output1CH

Intrusion 1Alarm sound “Peepo” rings Intrusion and general outputs Alarm sound “Peepo” rings Intrusion ouput Chime sound “Ding-dong” rings Operation stopsWith alert/alarm delay function With alert/alarm delay function, Without alert/alarm delay function

2CHIntrusion 2

Alarm sound “Peepo” rings Intrusion and general outputs Alarm sound “Peepo” rings Intrusion ouput Operation stops Operation stopsWithout alert/alarm delay function Without alert/alarm delay function3CH

Intrusion 3Alarm sound “Peepo” rings Intrusion and general outputs Operation stops Operation stops Operation stops Operation stopsWith alert/alarm delay function

4CHEmergency/fire

Alarm sound “Peepo” rings Emergency/fire and general outputs Alarm sound “Peepo” rings Emergency/fire and

general outputs Alarm sound “Peepo” rings Emergency/fire and general outputs

Without alert/alarm delay function Without alert/alarm delay function Without alert/alarm delay function*When receiving the tamper signal, alarm output operates as long as the alert switch is set to “Alert”, regardless of in the outing or presence alert mode.


■RECEIVER RX-360

A complete protection system can be established by combining with a low power type security transmitter, disaster ●prevention transmitter or emergency button transmitter. Switchable between the outing alert, presence alert, and cancel modes for security.Since the panel lock function operates once the alarm is output during the outing alert mode, there is no risk that ●an intruder will easily cancel the alert to stop the alarm.The delay timer will work only when your family members come home, assuming they come home while the pres-●ence alert is active.Since the unit is equipped with three types of output (general, intrusion and fire/emergency), intimidation or auto-●matic notifying devices can be connected according to your purpose.Operates the chime sound, alarm, and alarm output using the four channels according to your purpose.●Intrusion 1 (Chime/1CH)・Suitable for the entrance or back door alert. When opening/closing is detected during the alert cancel, the chime will ring to notify the arrival of a guest.Intrusion 2 (Perimeter/2CH)・Suitable for the perimeter alert. Regardless of the delay timer, immediate alert/alarm operation starts, which helps you intimidate an intruder at once, for more effective security.Intrusion 3 (Indoor/3CH)・Suitable for the indoor alert. Operation stops during the presence mode.Emergency/gas/fire (4CH)・Suitable for the emergency or fire alarm. This channel operates for 24 hours regardless of whether an alert is set.

25

75 (left side 40)

120

200

47

11.5

在室

外出

OFF

ON

VOL.

150

Knockout

AC cord length2m

Knockout

RX-300A


6

■SPECIFICATIONSModel No. RX-350Voltage 100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption 12W or 350mA max.Operating frequency band 426MHz band (wireless equipment of low power security system)Coverage distance Approx. 100m (line-of-sight distance)


Contact output

General dry relay contact (SPDT)　Contact rating: 30V AC/DC, 0.5A (resistive load)　Contact operation: 　　One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)Output (1) Dry relay contact (N.O.) (Operates in conjunction with the alarm sound)　Contact rating: 100V (AC), 500W max. (incandescent lamp load)　Contact operation: Timer operation for reception of CH1 to CH4Output (2) Dry relay contact (N.O.) (Operates in conjunction with the alarm sound)　Contact rating: 30V AC/DC, 0.5A (resistive load)　Contact operation: Timer operation for reception of CH1 to CH4

Power output 150mA max. 12V DC

Alarm sound

When canceled CH1 to CH3: Operation stoppedCH4: Peepo

During the presence alertCH1: Ding-dongCH2: PeepoCH3: Operation stoppedCH4: Peepo

During the outing alert CH1 to CH4: Peepo

Sound duration Chime sound: Approx. 6 secAlarm sound: Alarm output timer time

Sound volumeChime sound: 0 to 75dB/1m ahead, 　Changeable using the sound volumeAlarm sound: 75dB/1m ahead, fixed

Loop check error sound: Beep-beep-beepBattery exhaustion alarm: Chime rings intermittently. (Only during the presence alert)

Indicator

Power indicator (green)

Power ON: ONBattery exhaustion alarm: Blinks (only during the alert)

Channel indicator (red)

Alarm signal reception: 　Signal received channel ON (until recovery)Tamper signal reception: 　Signal received channel blinks (until recovery)Registration mode: Registered channel blinks

Alert mode indicator (green)

Outing alert mode: Outing alert indicator ONPresence alert mode: Outing alert indicator ONLoop check error: 　Outing and presence alert indicators ON alternately

Operation switch Power switch, Alert mode selector, Registration channel selector (internal), Cancellation switch (internal)Allowable number of registered transmitters 30 units

Timer functionAlarm output timer: 3 sec, 30 sec, 2 min, 5 minAlarm alert delay timer: 0 sec, 30 sec, 1 min, 2 min 　(Only CH1 and CH3 are effective during the outing alert)

Wiring Terminals (AC power supply input: Plug and terminal types combined)Mounting position Indoor (wall mount type)

Ambient temperature range -10ºC to +40ºCWeight Approx. 700g


Mode

CH

Outing alert mode(Alert when no one is at home, such as when you are out)

Presence alert mode(Alert when you are at home, such as when you are asleep)

Cancellation mode(When the outing or presence alert is not set)

Alarm sound Alarm output Alarm sound Alarm output Alarm sound Alarm outputCH1 Alarm sound ”Peepo”

Sound volume: Fixed(Alarm rings after the time set for alert/alarm delay elapsed.)

Outputs 1 and 2 and general output oper-ate after the time set for alert/alarm delay

elapsed.

Chime sound “Ding-dong” General output only

Operation stopped Operation stoppedCH2 Alarm sound “Peepo” Outputs 1 and 2 and general output

CH3 Operation stopped Operation stopped

CH4 Alarm sound ”Peepo”Sound volume: Fixed

Outputs 1 and 2 and general output immedi-

ately operateAlarm sound ”Peepo” Outputs 1 and 2 and

general output Alarm sound ”Peepo” Outputs 1 and 2 and general output

外出

在室

AC cord length2m

Knockout

Knockout

RX-350

25

120 11.5

VOL

ON

47200

150

75 (left side 40)

OFF


Assigns four channels into the operation application and generates a chime sound, alarm or alarm output accord-●ing to the alert status.Each channel application is as follows: CH1: Intrusion 1/chime, CH2: Intrusion 2 (Perimeter), CH3: Intrusion 3 (Indoor), CH4: Emergency/gas/fire. There are additional two alert modes, presence and outing. Performs a differ-ent alert operation for each channel.Assign transmitters into the channels according to their application and register them. Up to 30 units can be ●registered, which allows you to register all 30 units into 1 channel or 15 units into 2 channels (total 30 units) respectively.To register a transmitter, simply set the receiver to “Registration mode” and operate the transmitter to send the ●radio wave signal.Receives the battery exhaustion signal from each transmitter, and notifies of the battery exhaustion state with ●blinking of the channel indicator and an intermittent chime. (Only during the presence alert)Both AC/DC power supply terminals can be used according to the location. ●Automatically conducts a loop check (lock up check) when the outing alert is set, and notifies of an error (if any) ●by generating the check sound (beep-beep-beep) and alternately lighting the alert mode indicator. Shifts to the alert mode if no error occurs.An alert /Alarm delay function (0 sec., 30 sec., 1 min., 2 min.) is built in.●The alarm output timer is switchable between four steps. (3 sec., 30 sec., 2 min., 5 min.)●

■RECEIVER RX-350

7

■SPECIFICATIONSModel No. RX-30 RX-30APower input 10 to 30V DC (without polarity) 100V AC 50/60Hz

Current / power consumption 300mA max. 3WOperating frequency band 426MHz band (wireless equipment of low power security system)

Antenna Helical antenna (incorporated)Coverage distance Approx. 100m (line-of-sight distance)

Flash output

Flash color: Red (high-brightness LED x 12)Blinking frequency: 　 Repeats the cycle of lighting 4 times for approx. 0.4 sec. and one pause for 0.4 sec. when the alarm is activated.　When shifting to protection: Lights ON once for approx. 0.2 sec.　When shifting to cancellation: Lights ON twice for approx. 0.6 sec.　(Lights for 0.2 sec., pauses for 0.2 sec. and lights for 0.2 sec.)　During memory display operation: Lights once in cycles of approx. 3 sec.

Sound output

Sound volume: 　 Changeable from 0 to 70dB and more/ 1m using the sound volume when the alarm is activated　 A certain volume is kept when the alarm is set or cancel, regardless of the sound volumeSound cycle: 　Alarm: Repeatedly outputs the message during the timer set time.　 When shifting to protection: Rings once for approx. 0.2 sec. (synchronized with the flash output)　 When shifting to cancellation: Rings twice for approx. 0.6 sec. (synchronized with the flash output)

Messages RX-30 (A08), RX-30A (A08): “Error has occurred”RX-30 (A10), RX-30A (A10): “Someone has intruded”

Alarm output

Contact type: Dry semiconductor contact (N.O.)Contact operation: 　Operates for the set time when “Timer operation” of alarm operation mode is set.　(10, 30, 120, 300 sec) Without retrigger　 Operates in conjunction with the controller or contact point type transmitter when “real time operation” of alarm operation mode is set. (Maximum operation time is 10 minutes)Contact rating: 24V AC/DC, 0.25A max. (Resistive load)　Contact protection resistance 3Ω built in

Power indicator(green LED)

Power ON: ONTransmitter battery exhaustion alarm: Blinks (ON for 0.1 sec. and OFF for 0.6 sec.)Blackout backup: Blinks (ON for 0.6 sec. and OFF for 0.6 sec.)　Only when the dedicated emergency power supply is used

Reception indicator(red LED)

Reception: At the normal reception level: Lights for the reception time + 0.5 sec.　At the low reception level: Lights for the reception time + 4 sec.


Tamper operation

Transmitter tamper: 　Alarm operation for the timer set time when the tamper signal is received.　 (Operates in conjunction with the controller operation when the units is used to oper-ate with the controller)Body tamper: 　Alarm operation for the timer set time when the cover of the body is opened.

Alarm memory operation

Notification after alarm activation: Flashlight ON with a period of once in approx. 3 sec.　(Continues until the time of shift to the protection state again, after reset.)Notification after reset: Flashlight ON for 2 sec. and the alarm rings.　 (Activates only with the unidirectional type remote controller used, when the unit is used to operate with the controller)

Ambient temperature range -10ºC to +50ºCWiring Terminals

Mounting position Outdoor, indoorWeight Approx. 500g Approx. 600g

Appearance Housing: AES resin Lens: PC resin

88

91

Wiring insert 11.5×8 (knockout)

Wiring insert 11.5×8 (knockout)

Cover lock screw

Operation indicator


209.5

107

80

234



■AUDIO MESSAGE/FLASH RECEIVER RX-30 RX-30A

Wireless receiver with a flash light and audio message.●(Standard messages: “Error has occurred.”, “Someone has intruded.”)Can be installed both indoors and outdoors. Up to 50 transmitters can be registered.●Equipped with a flash light (LED x 12) and alarm sound.●Two models with different power supplies are available, a 12V DC type and 100V AC type.●Memory operation by flash light blinking when the alarm occurs.●The flash light operation can be set to be enabled or disabled when the alarm occurs.●The 100V AC type can provide blackout compensation for 30 minutes using an optional dedicated emergency ●battery (BA-20A).The alarm operation can be set or canceled using the optional remote control unit (for bidirectional wireless) RS-●001.

■OPTIONAL ACCESSORIES

●Pole attachment　<BP-22>

●Wall mounting 　bracket　<BW-24>

●Repeater　(For bidirectional 　wireless/registration type)

　<RTX-300>

●Dedicated 　emergency 　power supply　<BA-20A>


8

Contact outputRX-1000 RX-2000 RX-3000

Alarm output　　General output x 1　　　　Dry N.O.N.C.　　Individual output x 10　　　　 Dry semiconductor N.O. / N.C.

selectable contact (individually)Error output　　Tamper output x 1　　Battery exhaustion alarm output x 1　　Regular transmission error output x 1　　Environmental trouble output x 1　　　　 Dry semiconductor contact (N.O.

/ N.C. collectively selectable)







■SPECIFICATIONSModel No. RX-1000 RX-2000 RX-3000Voltage 100V AC 50/60Hz or 10 to 18V DC

Power / current consumption 6W or 350mA 8W or 450mA 10W or 550mAOperating frequency band 426MHz band (wireless equipment of low power security system)Coverage distance Approx. 100m (line-of-sight distance)

Antenna λ/4 whip antennaAlarm general output Dry N.O.N.C. 30V AC/DC 0.5A

Separate alarm outputContact type: Dry semiconductor N.O. / N.C. selectable (individually)10 circuits 20 circuits 30 circuits

Error outputContact type: Dry semiconductor contact (N.O. / N.C. collectively selectable)　30V AC/DC 0.25ATamper, battery exhaustion, regular transmission, environment, 4 circuits in total

Alert/Cancellation output Dry N.O.N.C. 30V AC/DC 0.5AAlert/Cancellation input 1 circuit N.O. / N.C. selectable contactPower/reception indicator 2-color LED Power ON: Green light ON (Red light ON only for reception)

CH indicatorRed LED Alarm reception: ON Error/Memory: Blinks

10 20 30

LED display Displayed when the alarm or error occurs (including the memory function)Displayed during operation, such as registration, cancellation, inspection, or check.

Alarm sound

When pressing the LCD operation buttons: Beep Inspection mode: Pu

Transmitter battery exhaustion: Beep (every 20 sec.) Registration error: Bu

Volume fixed for all eventsAllowable number of registered transmitters 60 units

Included functions Memory function, Tamper functionWiring Terminals


Weight Approx. 1,300g Approx. 2,000g Approx. 2,000gAppearance ABS resin (white)

(mounting pitch)

240215

170

(mounting pitch)

150

54

(knockout: top and bottom available)Grommet 25X16

90

167

<RX-1000>

240

340

300

(mounting pitch)

54

215(mounting pitch)

90

(knockout: top and bottom available)

Grommet 30X16

167

<RX-2000/3000>


●Alarm sound unit　<RXB-01>*12V DC power supply is required.


■MULTI-CHANNEL RECEIVER UNIT RX-1000 RX-2000 RX-3000

Receiver unit for large facilities, including buildings, public institutions, and schools. Receives the radio wave from ●each transmitter in the wireless security system, and notifies of an emergency, break-in, or fire via various notifica-tion devices or a multi-channel controller.Offers three types with a different independent output to deal with security, disaster prevention, and protection ●systems in large buildings. The following models can be selected according to the security scale.≪RX-1000≫ 10 channel indicators and independent output≪RX-2000≫ 20 channel indicators and independent output≪RX-3000≫ 30 channel indicators and independent outputUp to 60 transmitters can be assigned into channels and registered. Allows you to register all 60 units into 1 ●channel or 30 units into 2 channels respectively.Equipped with four error output circuits including a tamper output to notify of vandalism, environmental trouble ●output to notify of disturbing waves or peripheral noise, battery exhaustion and regular transmission error outputs, in addition to one circuit for general alarm output.Clearly displays the channel and address (registration no.) of the transmitter which sends the radio wave on the ●LCD to enable easy identification of the transmitter. Also, controls the alarm memory in conjunction with the alarm set or cancel.Displays the radio wave reception status from the transmitter using the audio and 4-step LCD displays.●

9

■SPECIFICATIONSModel No. RX-50KVoltage 3.7V DC (rechargeable lithium-ion battery)Continuous operation time

Approx. 50 hours (in the standby state)*More alarm operation shortens available operation time.

Charge time Power supply OFF: Approx. 8 hours Power supply ON: Approx 10 hours


426MHz (wireless equipment of low power security system)

Antenna Helical antennaCoverage distance Approx. 100m (line-of-sight distance)

LED display

Displayed when the alarm or error occurs (including the memory function)Displayed during operation, such as registration, cancellation, inspec-tion, or check.(Backlight ON for 10 sec. after key operation)

Alarm/charge indicator

2-color LEDAlarm/tamper reception: Red light blinks

During charge: Red light ONCharge completion: Green light ON

Built-in buzzer

Alarm (tamper) activation: “Pi-pi-pi-pi” for 20 sec. (Off delay operation)The sound volume can be set in 4 steps, “High”, “Middle”, “Low”, and “Silent”.Each key operation: Beep Inspection mode: PuRegistration error: Bu Sound volume fixed

Vibrator function Alarm (Tamper) activation: Operates when the sound volume is set to “Silent”.

Alarm contact output (General)

Alarm (Tamper) activation: 　Dry semiconductor output, N.O activates.　(Open drain output 5V DC, 30mA or less, With polarity)Output duration: Approx. 20 sec (Off delay operation)　 Synchronizes with the contact status of the transmitter, when re-ceiving the tamper signal or that from maintainance type transmitter (contact input transmitter)

Alarm output function

Alarm (Tamper) activation: Alarm sound “pi-pi-pi-pi” is output from the output terminal


Body tamper Not availableMemory function Available (Cleared when the power is turned OFF.)Ambient

temperature range 0ºC to +45ºC

Weight Approx. 84gAppearance ABS resin (pearl silver coating)

Unit Dedicated chargerModel No. DC-50KVoltage 100V AC 50/60HzContinuous operation time No contact charge type

Ambient temperature for charging battery +10ºC to +40ºC

Weight Approx. 120gAppearance PPE resin (black)

Portable receiver RX-50K

Dedicated charger DC-50K

■OPTIONAL ACCESSORIES　*Both are attached from shipment.

* This is not a mobile phone. The LCD backlight has been lightened for the catalog. Please note that the unit does not always light during usage.

●Dedicated charger　<DC-50K>

●Dedicated battery　<BA-50K>


By combining this unit with each transmitter in the low power security system, you can get the status ●of each transmitter at hand within the reception area while you are carrying it. This enables alarms to be notified of in real time.This also enables the notification of emergencies via an electric communications line by connecting its external output to a communication device such as a mobile phone.Up to 50 units can be registered, which allows you to register all units into 1 channel or assign them ●into 4 channels for registration.Applicable to large facilities including schools, factories, and care facilities, this unit easily helps to identify from which area the radio wave is received, by assigning one of four channels to each transmitter.Light-weight, with a total weight of about 84g including battery. Can be comfortably carried around ●as though it was a mobile phone.Smart design, with a luxurious pearl silver color, and focusing on operability.When receiving the alarm signal from a transmitter, this unit notifies with a “beep” sound in three ●levels of volume or vibration, and displays the alarm type on the LCD.Since the alarm sound can be heard using the attached earphone, this unit can be used in various places and situations.The battery exhaustion, tamper, and/or regular transmission error of a transmitter can be also dis-played on the LCD.In the check mode, the radio wave reception status can be confirmed with a 4-step antenna display.

■MOBILE RECEIVER RX-50K


10

■SPECIFICATIONSModel No. RX-10 RX-10A

Voltage 10 to 28V DC (with polarity) 100V AC 50/60Hz

Current/power consumption 100mA 2W



Coverage distance Approx. 100m (line-of-sight distance)

Antenna λ/4 whip antennaContact output Alarm: Dry relay contact N.O. / N.C. selectable

Contact capacity 100V AC 500W max. (incandescent lamp load)30V DC 5A max. inductive load

Alarm output timer3/10/30/60 sec. /2/3/5 min. / Continuous(Off delay operation)Retained until the power is turned OFF, when [Continuous] is set.

Indicator

Power ON: Green light ONBattery exhaustion: Green light blinksReception: 　Red light ON (synchronized with the alarm output)Lack of reception sensitivity: 　Red light blinks (for approx. 3 sec. after reception)Registration mode: 　Red and green lights ON alternately.


Wiring With the cab tire cable (5m)Ambient


Weight Approx. 950g (including cable)

Approx. 1,000g (including cable)

Appearance AES resin

89

89

7789

99

103

4-4 screw supported

207

φ113

（24）

Cord length 5m


■RECEIVER UNIT RX-10 RX-10A

Two models with different power supplies are available, a DC type and AC type.●The alarm output time can be selected from eight types of timer settings.●Lead wire supplied together to help wiring.●The battery exhaustion status of a transmitter can be confirmed with the operation indicator.●Can be installed outdoors with its rainproof structure.●Can be combined with an intimidation device such as a siren or light and used outdoors.●Can be mounted on a wall or pole.●(An optional attachment band is required for pole mounting.)The antenna can be removed. You can store the main unit in a box and connect an extension antenna.●

11

■SPECIFICATIONSModel No. RTX-300

Voltage 100V AC 50/60Hz or 10 to 16V DC (with polarity)

Power/current consumption 2W or 150mA

Operating frequency band (output)

426MHz band 4 waves (10mW max.)(wireless equipment of low power security system)

Coverage distance


Transmission radio wave arrival distance


Blackout compensation

For approx. 30 min. (when fully charged), Nicad battery

Ambient temperature range -10ºC to +50ºC

Mounting position Indoor (wall mounting)Weight Approx. 600g



120

170

15

83.5

132

(mounting pitch)

(mounting pitch)

25 3-φ4 screw supported

（23）

14.3


　

25

(knockout)

Grommet 25×10

Grommet 9.5×10

Grommet 25×10

14.3

50.7

Reference diagram for mounting145

AC cord length 2m

RepeaterSupports various layouts by using the repeater mode and delay time settings, even in the place where a transmitter is 100m away from a receiver or under bad radio wave conditions.

■REPEATER RTX-300

When radio waves cannot be transmitted directly (in ●a location more than 100m away or under bad radio wave conditions), this unit receives the radio wave from a transmitter and resends it to a receiver.Though this unit normally relays the registered trans-●mitter or repeater, unregistered transmitters can be relayed depending on the settings. This is for transmit-ters only.Up to 60 units including a remote control unit can be ●registered.When receiving the alarm and error signals from a ●transmitter, the receiver unit displays the channel and registration no. of the transmitter on the LCD.


12

■SPECIFICATIONSModel No. TX-101A TX-101P

Voltage 3V DC(coin-type lithium battery: CR-2032 included)

Battery lifeApprox. 2 years (1 transmission per day)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output) 426MHz band (3mW max.)

Radio wave arrival distance Approx. 100m (line-of-sight distance)

Included functions

Battery exhaustion function/Regular transmission function

Transmission mode changeover function

One-shot transmission

Mounting position Indoor Indoor/semi-outdoor (Drip-proof structure)


Weight Approx. 35g (including battery)

Approx. 118g (including battery)



●Wall mount holder　for TX-101　<BH-101>

85

654

PUSH

押

70 14.5

120

●Pendant type holder　<BPH-101>


TRANSMITTER SERIESA wide variety of transmitters for various security plans, like security, disaster prevention, and protection.

■CARD TYPE/PUSH BUTTON TRANSMITTER TX-101A TX-101P

For emergency notification For theft prevention

For fire prevention For intrusion prevention For protection from suspicious individuals

●Prevention of car break-ins or bicycle theft●Theft prevention of valuables and cash

●Accidental or suspicious fire detection ●Glass breakage or room intrusion detection ●Alerts around the perimeter of buildings

●Emergency calls in case of burglary, or acute disease

You can select the most su i tab l e t ransm i t te r according to the applica-tion and location.

Card type transmitter　TX-101ACompact, card type mobile transmitter with a thinness of 6mm●Two transmission modes are available: one-shot transmission ●which transmits the radio wave once every push of the button, and continuous transmission which continues transmission until reset.The battery normally lasts around 2 years when transmitting once ●a day.Utilizes a coin type lithium battery for simple replacement.●Monitors the radio wave arrival status using the regular transmis-●sion function.Transmits the battery exhaustion signal to the receiver and the ●body indicator blinks when the battery voltage drops below a certain level.Mounted on the wall easily using the optional wall mount holder.●

Push button transmitter　TX-101PSplash-proof construction usable in semi-indoor areas, this unit ●can be installed at an entrance and used as a chime to notify the arrival of guests.One-shot transmission which transmits the radio wave once every ●push of the buttonThe transmission function is the same as that of TX-101A.●

<TX-101A>

<TX-101P>

13

■SPECIFICATIONSModel No. TX-113Power supply AAA alkaline battery x 2 (3V DC)

Battery life

Approx. 2 years (10 transmissions per day, at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Output 10mW max.Radio wave arrival distance 100m max. (line-of-sight distance)

Antenna Incorporated

Indicator (red LED) Transmission: ONBattery exhaustion: Blinks

Mounting position Indoor, outdoorAmbient


Waterproof Waterproof for daily life

Included functionsOne-shot transmission/Continuous trans-mission changeover functionBattery exhaustion functionRegular transmission function

Weight Approx. 140g (including battery)Appearance AES resin (white)

■SPECIFICATIONSModel No. TX-102A TX-102BK

Input signalAlarm input: 1 circuit

Tamper input: 1 circuit

Alarm input (N.C. only)/Tamper input:1 circuit for each (With the alert/can-cellation switch)

Voltage 9V DC (alkaline battery) or 10 to 15V DC

Battery lifeApprox. 2 years (10 transmissions per day)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Included functionsBattery exhaustion function/Regular transmission function/Transmission mode changeover function/Tamper function

Mounting position IndoorAmbient



■SPECIFICATIONSModel No. TX-116 TX-116L

Power supplyAA alkaline battery x 2 (3V DC) or 5 to 15V DC 35mA

Dedicated lithium battery CR17450E-R-2-CM2 (3V DC) or 5 to 15V DC 35mA

Battery life

Approx. 2 years (100 transmissions per day, at normal temperature)

Approx. 8 years (100 transmissions per day, at normal temperature)

* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.


Ambient temperature range

-10ºC to +50ºC(The battery function may deteriorate below

0ºC or at 40ºC or higher.)Mounting position Indoor

Included functions

One-shot transmission/repeat transmission switchover functionControlled transmission functionBattery exhaustion alarm functionRegular transmission functionBody tamper


Approx. 100g (including battery)


36

φ83

48 (mounting pitch)

Table type

■OPTIONAL 　ACCESSORIES

When the protector is attached

●Protector <BPR-113>

Grommet(knockout)

Grommet(knockout)

6432 23

100

41


●Lithium battery　<U9VL>　(10 pcs/pkg)

●AC adapter　<DC-1115>

■OPTIONAL ACCESSORIES●Dedicated lithium battery　<CR17450E-R-2-CM2>


Grommet 10×7.5 Grommet 7.5×9

Grommet 6.2×9.5(knockout)

(knockout)





83.5 (mounting pitch)

62

21.2

（9）

（11）

61

2340

140




■PUSH BUTTON WATERPROOF TRANSMITTER TX-113

■CONTACT INPUT TYPE TRANSMITTER TX-102A TX-102BK

■CONTACT INPUT TYPE TRANSMITTER TX-116 TX-116L

Can be used as an emergency push button.●A waterproof transmitter for daily life which can be used in a ●bathroom or outdoors.Can be mounted on the wall or simply placed on the table ac-●cording to the situation and purpose of use.Switchable between the one-shot and continuous transmission ●modes2 AAA alkaline batteries for the power supply.●The battery normally lasts around 2 years when transmitting ●10 times a day.

Transmitter used to incorporate the wired sensors including the ●shutter and glass breakage sensor, and/or alarm box into this system.Two type transmission modes are available: one-shot transmission ●which transmits radio wave for one second at the sensor signal in-put and recovery respectively, and repeat transmission which trans-mits every 20 seconds from the sensor signal input to recovery.The input signal can be switched between N.O. and N.C., which ●corresponds with various sensors (TX-102BK is for N.C. only.)The battery normally lasts around 2 years when transmitting 10 ●times a day.Utilizes alkaline batteries for simple replacement.●Monitors the radio wave arrival status using the regular transmis-●sion function.Transmits the battery exhaustion signal to the receiver as well as ●the body indicator blinks when the battery voltage declines below a certain level.

Low cost contact input type transmitter●Two types are available: alkaline battery and long life lithium ●battery specifications. Can operate using an external power supply from 5V DC to 15V DC.Incorporates the transmission control function which decreases ●the transmission frequency to extend the battery life when con-nected with a sensor with a high frequency of alarm activation.


14

■SPECIFICATIONSModel No. TX-102SKInput signal When detecting the shockVoltage 9V DC (alkaline battery)

Battery lifeApprox. 1 year (1 transmission per day)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.







■SPECIFICATIONSModel No. TX-101K

Voltage 3V DC (coin-type lithium battery: CR-2032 included)




Included functions Battery exhaustion alarm function/Regular transmission function/One-shot transmissionAmbient


Weight Approx. 40g (including battery)Appearance ABS resin (white)

■SPECIFICATIONSModel No. TX-102MG

Input signal Magnet switchDetection distance 15 mm max.

Voltage 9V DC (alkaline battery) or 10 to 15V DC



Radio wave ]arrival distance Approx. 100m (line-of-sight distance)

Detection system Magnet switchOperating distance 15mm max.




Weight Housing: Approx. 124gMagnet: Approx. 12g


Grommet(knockout)

Grommet(knockout)

6432 23

100

41■OPTIONAL ACCESSORIES

●Lithium battery　<U9VL> (10pcs/pkg)


●Installation stand　<BS-101K>

7.1

85

54

UP


64

50

23

12

100

12

Housing

Reed switch

Reed switch

Magnet


●Lithium battery　<U9VL>(10 pcs/pkg)




■SHOCK SENSOR TRANSMITTER TX-102SK

■TILT DETECTION TRANSMITTER TX-101K

■MAGNET SWITCH TRANSMITTER TX-102MG

By setting the shock detection dedicated to TX-102A, this unit ●detects the shock to the body or installation surface of the body and transmits a signal.The transmission function is the same as that of TX-102A.●

Alarm device for the theft or vandalism of drawings or exhibi-●tions by detecting the tilt of objects with this device mounted.Transmits the alarm signal when the object tilts by approxi-●mately 20°, regardless of direction.Simply installed by placing the UP mark of the device upward ●and fixing using the attached Velcro.The battery normally lasts around 2 years when transmitting ●once a day.Utilizes a coin type lithium battery for simple replacement.●Monitors the radio wave arrival status using the regular trans-●mission function.Transmits the battery exhaustion signal to the receiver and the ●body indicator blinks when the battery voltage drops below a certain level.

Wireless magnet switch by adding the dedicated switch unit ●on TX-102A.The installation position can be freely selected, since this unit ●has three detection points: upper side, and both right and left sides of the body.The transmission function is the same as that of TX-102A.●

15

■SPECIFICATIONSModel No. TX-102S400 TX-102S600 TX-102S780

Stick sensorSwitching life 100,000 operations min.Ambient


Mounting positionOutdoor, indoor

(Caulking necessary on the terminals for outdoor installation)

Weight Approx. 90g Approx. 110g Approx. 130g

Appearance Pole, pole end: StainlessBase, cover: PC resin (bronze)Transmitter

Power supply9V DC alkaline battery, 6LR61 (lithium bat-tery U9VL) or external power supply of 10 to 15VDC (40mA)

Battery life

Approx. 2 years (10 transmissions per day, at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



-10ºC to +50ºC (The battery function may deteriorate below

0ºC or at 40ºC or higher.)Mounting position Indoor (wall mounting)

Included functions

One-shot transmission/repeat transmission switchover functionBattery exhaustion alarm functionRegular transmission functionBody tamper

Weight Approx. 120g (including battery)Appearance ASA resin (white)

■SPECIFICATIONSModel No. TX-119S400 TX-119S600 TX-119S780







Power supply AAA alkaline battery LR03 x 2 (3V DC)





0ºC or at 40ºC or higher.)Mounting position Indoor, outdoor

Included functions

One-shot transmission/repeat transmission switchover function

Controlled transmission functionBattery exhaustion alarm functionRegular transmission function

Body tamperWeight Approx. 100g (including battery)

Appearance ASA resin (bronze)

*The transmission part is the same as that of TX-102A.

2-φ3 screw supported(knockout)

20

52 19 41 41 52

6.25

Grommet 2-3.5×6(knockout)

6

Grommet 8 x 6: Same on the opposite side

(knockout)2-φ3 screw supported

(knockout)

16 30 28 1620

SK-400：MAX400SK-600：MAX600SK-780：MAX780

φ11

φ6

2-φ3 screw supported(knockout)

2-Φ3 screw supported(knockout)

Adjustment screwAdjustment screwAdjustment width 20Adjustment width 20Adjustment screwAdjustment width 20


<Sensor>

Grommet(knockout)

Grommet(knockout)

6432 23

100

41

<Transmitter>■ INSTALLATION EXAMPLE

Exposed/embedded wiring outlet


Connection cord(length 2m)

φ3

10

5.5

16

4.5

156

22

R10

166.2

102.7

30

Adjustment screwAdjustment width 20



TX-119S400 : MAX400

Grommet 2-3.5 x 6(knockout)

Grommet 8x 6: Same on the opposite side(knockout)

(knockout)

52

2016

41

6.256

φ11

φ6

1620

41 52

30 28

19







Switch side Spring sideGrommet 8x 6: Same on the opposite side(knockout)



Installed outside the window frame (Side)

Installed inside the window frame (Front)

<Transmitter><Sensor>



■STICK SENSOR TRANSMITTER TX-102S400 TX-102S600 TX-102S780

■WATERPROOF STICK SENSOR TRANSMITTER TX-119S400 TX-119S600 TX-119S780

A transmitter combining TX-102A with the stick sensor.●Can be installed on various types of windows, like glass ●louver or fixed windows. Outputs the detection signal when the installed pole is removed, and transmits the signal via the radio wave to the receiver.Three types are available according to the window frame ●size. (Stick size: 400mm, 600mm, 780mm)The transmission function is the same as that of TX-102A.●Has a radio wave arrival distance of approx. 100m (line-●of-sight distance)

A transmitter combining the waterproof ●contact input transmitter TX-119 with the stick sensor SK-400/600/780 (bronze color only).Suitable for the alert of jalousie windows ●in the bathroom as both the stick sensor and transmitter are waterproof.The stick sensor and 2m long connec-●tion cable are attached with the trans-mitter body.Switchable between the one-shot and ●repeat transmission modesThe transmitter includes an anti-tamper-●ing function.


16

■SPECIFICATIONSModel No. TX-119LS400 TX-119LS600 TX-119LS780







Power supply Dedicated lithium battery CR17450E-R-CM1 x 1 (3V DC)





0ºC or at 40ºC or higher)Mounting position Indoor, outdoor

Included functions

One-shot transmission/repeat transmission switchover functionControlled transmission functionBattery exhaustion alarm functionRegular transmission functionBody tamper

Weight Approx. 100g (including battery)Appearance ASA resin (bronze)

■SPECIFICATIONSModel No. TX-102GS

Detection system PiezoelectricPower supply Alkaline battery 6LR61 (9V DC) included






Weight Transmitter: Approx. 120gSensor: Approx. 30g


Glass thickness Detection area6mm max. R-300 x Glass thickness (mm)6mm min. R=1800mm (constant)

Exposed/embedded wiring outlet


Connection cord(length 2m)

φ3

10

5.5

16

4.5

156

22

R10

166.2

102.7

30




<Transmitter>


●Lithium battery　<CR17450E-R-CM1>

TX-119LS400 : MAX400

(knockout)Grommet 2-3.5 x 6(knockout)


(knockout)

(knockout)

52

2016

41

6.256

φ11

φ6

1620

41 52

30 28

19


2-φ3 screw supported2-φ3 screw supported




Switch side Spring side




Installed outside the window frame (Side)

Installed inside the window frame (Front)

<Sensor>

64

100

23

41

32

Grommet(knockout)

Half stripped

Operation indicator15φ37

950

��

<Transmitter> <Sensor>

■Detection Area 　Diagram

180cm

When installed in the center of the glass surfaceDetection area: Circle form with a radius of R around the sensor

* R depends on the glass thickness.

When installed in the corner of the glass surfaceDetection area: Fan-like form with a radius of R around the sensor


●Lithium battery　<U9VL>(10 pcs/pkg)

●GS checker　<EG-01>

●Dedicated adhesive　<KE-347T>

●Glass breakage sensor　<GS-03>



■WATERPROOF STICK SENSOR TRANSMITTER TX-119LS400 TX-119LS600 TX-119LS780

■GLASS BREAKAGE SENSOR TRANSMITTER TX-102GSA transmitter combining the contact input transmitter TX-●102A with the glass breakage sensor GS-03.Detects the special vibration frequency generated when ●glass breaks.Has a piezoelectric glass breakage sensor to bond to the ●glass of window or shop window.Up to 10 dedicated glass breakage sensors (GS-03) can ●be connected.

* Dedicated adhesive (Optional) KE-347T

Transmitter by combining waterproof ●contact input transmitter TX-119 with the stick sensor SK-400/600/780 (bronze color only).Suitable for the alert of jalousie windows ●in the bathroom as both the stick sensor and transmitter are waterproof.The stick sensor and 2m long connec-●tion cable are attached with the trans-mitter body.Switchable between the one-shot and ●repeat transmission modesThe transmitter includes an anti-tamper-●ing function.

17

■SPECIFICATIONSModel No. TX-112

Detection system Ultrasonic wave collection system

Alert areaVertical direction: 8mHorizontal direction:

7m (when mounted on the ceiling)

Area angle adjustment range

Vertical direction: 36ﾟ (3ﾟ pitch)Horizontal direction:

25ﾟ (at the base mounting hole)

Voltage 10 to 16V DC or dedicated AC adapter (DC-1115)

Consumption current

Standby: 25mA max.Transmission: 80mA max.


Radio wave arrival distance

Approx. 100m (outdoor line-of-sight distance)

Antenna Incorporated

Included functionsRegular transmission function, Tamper function, Alarm memory function, Environ-ment check function

Mounting position Indoor (on the ceiling or wall)Ambient

temperature range -10ºC to +50ºC (no condensation)

Weight Approx. 230g

Appearance Housing: ABS resin (white)Cover: PE resin (white)

■OPTIONAL ACCESSORIESGrommet 7.5×9(knockout: right and left available)

Grommet 6.2×9.5(knockout)


23

Grommet 10×7.5(knockout)


83.5 (mounting pitch)

(11)

62

21.2

(9)

61

40

140


50

15φ37

930

<Transmitter>

<Sensor>

●Dedicated 　lithium battery　<CR17450E-R-2-CM2>

●GS checker　<EG-01>

●Dedicated adhesive　<KE-347T>

●Glass breakage 　sensor　<GS-04>

Front

7237.4

φ111φ98.5

Front mark


●Dedicated AC adapter　<DC-1115>

●Glass checker　<EG-1000>

■Detection Area Diagram

Sensitivity volume: Max. (H)

(3°pitch)

Front

Front mark(Side view)(Front view)

４３２１１２３４

８

７

６

５

４

３

２

１

6 5 5 6［ｍ］

［ｍ］［ｍ］

［ｍ］

(36°variable)

１

２

３

４５

６７

８

４３２１１２３４



■GLASS BREAKAGE SENSOR TRANSMITTER TX-116GS TX-116GSL

■GLASS BREAKAGE SENSOR TRANSMITTER TX-112

Detects the glass breakage of a window, door or shop ●window.A transmitter combining TX-116 with the glass breakage ●sensor GS-04.Has a piezoelectric glass breakage sensor to bond to the ●glass surface.Alert area: 180 cm radius and less (On glass surface)●Two types are available: alkaline battery and long life ●lithium battery.Up to 10 dedicated glass breakage sensors (GS-04) can ●be connected.

* Dedicated adhesive (Optional) KE-347T

A transmitter combining the sound collecting glass sensor ●with the transmission unit.Two different ultrasonic wave detection circuits securely ●catch the breaking sound (ultrasonic wave band) gener-ated by the shock in the flat glass of the window or shop window, and a radio wave is transmitted.The angle can be adjusted both horizontally and vertically ●to set the best detection area.The sensitivity can be set according to the installation ●conditions.Regular transmission function is available to regularly no-●tify the transmitter condition to the corresponding receiver to check for errors such as transmitter breakage.Two modes are selectable for the indicator: the check ●mode to check the peripheral ultrasonic wave environment and the sensor operation status, and the alert mode when the indicator displays nothing during an alert.Equipped with an anti-tampering function to notify of when ●the sensor is removed due to vandalism or on purpose.The power supply is 10 to 16V DC, or the dedicated AC ●adapter DC-1115 is required. (Note that this unit does not operate using a battery.)

■SPECIFICATIONSModel No. TX-116GS TX-116GSL

Voltage AA alkaline battery x 2Lithium battery CR17450E-R2CM2

Battery life

AA alkaline battery: Approx. 2 yearsLithium battery CR17450E-R2CM2: 　Approx. 8 years(1 transmission per day)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.


Included functions

Battery exhaustion function/Regular trans-mission functionTransmission mode changeover function/Tamper function/Controlled transmission function

Weight Glass breakage sensor: Approx. 40gTransmitter: Approx. 100g (including battery)



18

■SPECIFICATIONSModel No. TX-104B TX-104P TX-104KType Watch type Pendant type Key ring type

Voltage 3V DC button-type alkaline battery (LR44 x 2) included



426MHz band (10mW max.)


Included functionsBattery exhaustion function/Regular transmission function/Transmission mode changeover function/Simple water protec-tion structure


Weight Approx. 20g (transmitter body including battery)

Appearance Housing: ABS resin (gray)

■SPECIFICATIONSModel No. TX-110Type Pendant type

Voltage 3V DC button-type alkaline battery (LR44 x 2) included




Included functionsOne-shot transmission/Continuous transmission changeover function, Battery exhaustion function, Regular transmission function


Weight Approx. 45g (including battery and neck strap)


14.4

(belt size 18mm)Watch type

Pendant type Key ring type

42

35


* One-side push type is also available.　TX-104B-S (Watch type)　TX-104P-S (Pendant type)　TX-104K-S (Key ring type)Simple one-side push type is most suitable for elderly people.

45.2

20.3

75


■PENDANT/WATCH TYPE TRANSMITTER TX-104B TX-104P TX-104K

■PENDANT TYPE WATERPROOF TRANSMITTER TX-110

Portable compact transmitter to be used via one touch ●operation.Three types are available; watch type (TX-104B), pendant ●type (TX-104P), and key ring type (TX-104K). Selectable according to your purpose.Two transmission modes are available: one-shot transmis-●sion which transmits the radio wave once every push of two buttons on the right and left sides at the same time, and continuous transmission which keeps transmitting until reset.Has a simple waterproof structure, which enables use in ●places exposed to water, such as a kitchen or bathroom.The battery normally lasts around 2 years when transmit-●ting once a day.Utilizes a button type alkaline battery for simple replace-●ment.Monitors the radio wave arrival status using the regular ●transmission function.Transmits the battery exhaustion signal to the receiver and ●the body indicator blinks when the battery voltage drops below a certain level.

A pendant type transmitter to be used with a simple light ●push of the button.Two transmission modes are available: “one-shot trans-●mission mode” to transmit three times every 2.1 sec. every push of the button, and “continuous transmission mode” which keeps transmitting until reset.A waterproof transmitter for daily life which can be used in ●the kitchen or bathroom while attached. (Do not immerse in water.)The battery normally lasts around 2 years when transmit-●ting once a day.Monitors the radio wave arrival status using the regular ●transmission function.Transmits the battery exhaustion signal to the receiver and ●the body indicator blinks when the battery voltage drops below a certain level.

19


Voltage 3V DC(coin-type lithium battery [CR2032] x 1)


Transmission frequency

426MHz band(wireless equipment of low power

security system)Transmission output 3mW max.

Antenna IncorporatedRadio wave arrival distance 100m max. (line-of-sight distance)

Indicator(red LED)

Transmission: ONBattery exhaustion alarm: Blinks


-10ºC to +50ºC(The battery function may deteriorate

below 0ºC.)

Included functions

One-shot transmission/Continuous transmission changeover functionBattery exhaustion function, Regular transmission function

Weight Approx. 25g (including battery)Appearance ABS resin (white, red)

Accessories Coin-type lithium battery (CR2032)Neck strap

■SPECIFICATIONSModel No. TX-117Voltage 9V DC alkaline battery:6LR61 (6LF22)

Battery life

Approx. 1 year (when transmitting once a day, and ringing the alarm for 10 sec. at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Transmission part Operating

frequency426MHz band

(wireless equipment of low power security system)Output 10mW max.Antenna IncorporatedRadio wave arrival distance 100m max. (line-of-sight distance)

Alarm output

Semiconductor switch output (with polarity)Continuous output until the recovery button is pressedContact rating: 　28V, 0.2A (ON resistance approx. 3.5Ω)JIS C6560 complied small single headed plug supported(mini plug with a diameter of 3.5mm)

Transmission delay timer 0 (None), 5, 10, 15 sec.

Operation switch Emergency/Recovery buttons

Alarm sound

Preliminary alarm (beep, beep, beep, beep)Full alarm (Piririri, piririri)With/without the alarm sound: ChangeableSound volume: Approx. 95dB/1m(Volume may be extremely low when the bat-tery is exhausted.)

Indicator (red LED) Transmission: ONBattery exhaustion: Blinks



0ºC or at 40ºC or higher.)

Included functions Battery exhaustion function/Regular transmission function

Weight Approx. 140g (including battery and soft case)

Appearance Housing: ABS resin (black)Soft case: PU resin (transparent, black)

14

65

40

When the neck strap is attached

64

20.5104

Soft case (Accessory)



■PENDANT TYPE TRANSMITTER TX-122

■ALARM PUSH BUTTON TRANSMITTER TX-117

A pendant type transmitter to be used with a simple light ●push of the button.Erroneous operation can be avoided because the alarm is ●transmitted when pushing two buttons on the right and left side at the same time.Two transmission modes are available: one-shot transmis-●sion which transmits the radio wave once, and continuous transmission which keeps transmitting until reset.Monitors the radio wave arrival status using the regular ●transmission function at the receiver.Transmits the battery exhaustion signal to the receiver and ●the body indicator blinks when the battery voltage drops below a certain level.Utilizes a general coin type lithium battery (CR2032) for ●simple replacement. The battery normally lasts around 2 years when transmit-●ting once a day.

A push button transmitter equipped with the ●alarm function, which enables on-the-spot intimi-dation and/or site identification using sound.When pressing the emergency button, an alarm ●of approximately 95dB rings and the signal is repeatedly transmitted until the reset button is pressed.A soft case is available to attach the transmitter ●to a belt.Equipped with a transmission delay timer to pre-●vent erroneous operation.Notifies of battery exhaustion with blinking of the ●body indicator.Can also transmit radio waves without ringing ●the alarm.


20

■SPECIFICATIONSModel No. TX-111-S (G) TX-111 (B) TX-111-S (BL)

Voltage 3V DC coin-type lithium battery (CR2025) included

Battery life

Approx. 3 years (1 transmission per day, at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.


Radio wave ar-rival distance Approx. 100m (line-of-sight distance)

Included func-tions

Analog watch, 10 air-pressure water-proof structure, Battery exhaustion alarm function, Regular transmission function

Ambient tem-perature range -5ºC to +55ºC

Time display Analog: 3 hands (hour, minute, second)Weight Approx. 41g

Appearance ABS resin(gray)

ABS resin(black)

ABS resin(brown)

Minute hand

Second hand

Indicator for checking notification

Watch stem

Emergency button

Band

38

15.65

43.5

18(band width)

Hour hand



●Battery replacement kit

●Battery replacement kit

Minute hand

Second hand

Indicator for checking notification

Watch stem

Emergency button

Band

38

15.65

43.5

18(band width)

Hour hand



■WATCH TYPE TRANSMITTER TX-111-S (G) TX-111 (B) TX-111-S (BL)

■WATCH TYPE TRANSMITTER TX-111C-S (G) TX-111C-S (BL)

A portable transmitter, with the transmission function ●incorporated in an analog watch.One-shot transmission available with a simple light push ●of the button.10 air pressure waterproof, available to use in bathroom or ●pool while attached.The battery normally lasts around 3 years when transmit-●ting once a day.Monitors the radio wave arrival status using the regular ●transmission function.Transmits the battery exhaustion signal to the receiver and ●the body indicator blinks when the battery voltage drops below a certain level.Belt: 3 colors (Gray, Brown, Black)●

Continuous transmission type of TX-111.●Transmission continues until reset, suitable for emergency ●calls.Belt: 2 colors (Gray, Black)●

■SPECIFICATIONSModel No. TX-111C-S(G) TX-111C-S(BL)

Voltage 3V DC coin-type lithium battery (CR2025) included

Battery life

Approx. 3 year (stanby)Approx. 1 hour for continuous transmis-

sion (with a new battery)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Included functions

Analog watch, 10 air-pressure water-proof structure, Battery exhaustion alarm function, Regular transmission function


Time display Analog: 3 hands (hour, minute, second)Weight Approx. 48g

Appearance ABS resin (gray) ABS resin (black)

21

■SPECIFICATIONSModel No. TX-115 (B) TX-115 (W) TX-115 (G) TX-115L (B) TX-115L (W) TX-115L (G)Power supply AAA alkaline battery LR03 x 2 Lithium battery: CR17450E-R-CM1Operating distance 20mm max. (between magnet and switch)

Battery lifeAAA alkaline battery: Approx. 2 years

Lithium battery R17450E-CM1: Approx. 8 years (20 transmissions per day)*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Included functions Battery exhaustion function, Regular transmission function, Tamper transmission function


-10ºC to +50ºC(The battery function may deteriorate below 0ºC or at 40ºC or higher.)


AppearanceASA resin

Dark brown White Gray Dark brown White Gray

■SPECIFICATIONSModel No. TX-115C (B) TX-115C (W) TX-115C (G) TX-115CL (B) TX-115CL (W) TX-115CL (G)Power supply AAA alkaline battery LR03 x 2 Lithium battery: CR17450E-R-CM1Operating distance 20mm max. (between magnet and switch)

Battery lifeAAA alkaline battery: Approx. 2 years

Lithium battery R17450E-CM1: Approx. 8 years (20 transmissions per day)*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Included functions Battery exhaustion function, Regular transmission function, Tamper transmission function




AppearanceASA resin

Dark brown White Gray Dark brown White Gray




Magnet

Main unit

Center in the detection area



50

Switch

12 Main unit

R10

Cord length: 200mm

2.8 Magnet



12

5040

30

102.7

166.2

156

1216

40


4.5

2-φ screw supported

22





■MAGNET SWITCH TRANSMITTER (ONE PIECE TYPE) TX-115 (B) TX-115 (W) TX-115 (G) TX-115L (B) TX-115L (W) TX-115L (G)

■MAGNET SWITCH TRANSMITTER (SEPARATE TYPE) TX-115C (B) TX-115C (W) TX-115C (G) TX-115CL (B) TX-115CL (W) TX-115CL (G)

A switching sensor transmitter with the magnet ●switch built in.One sensor unit is enough to detect a double win-●dow if installed on the top of a sash crescent.Can be installed on the door, window, or other ●opening parts.No wiring is required between the transmitter and ●magnet switch, which does not affect the appear-ance.A waterproof transmitter which can be used in the ●bathroomTwo types are available: alkaline battery or long life ●lithium battery.Has a radio wave arrival distance of approx. 100m ●(line-of-sight distance)

A switching sensor transmitter with the magnet switch separated exter-●nally using a lead wire.As the switch part is separated, this unit can be installed even on a single ●window, where there is a narrow space between the inside net window and main window.Can be installed on the door, window, or other opening parts.●A waterproof transmitter which can be used in the bathroom●Two types are available: alkaline battery or long life lithium battery.●Has a radio wave arrival distance of approx. 100m (line-of-sight dis-●tance)


22


Detection system Passive infrared systemDetection area Wide, long, curtain, spot selectable

Standard power supply 9V DC lithium battery (U9VL) includedOptional power supply BA-103




Included functionsBattery exhaustion function, Regular transmission function, Operation restriction timer function

Mounting position Indoor, outdoor (rainproof)Ambient


Weight Approx. 212g (excluding battery)

Appearance Housing: AES resin (white)Cover: PE resin (white)

■SPECIFICATIONSModel No. TX-114 TX-114L

Detection system Twin systemAlert area 2-step fan shape (90º) x 1

Power supplyTX-114: AA alkaline battery x 2

TX-114L: Lithium battery CR17450E-R2CM2(AC adapter only for the optional accessory)

Battery life

AA alkaline battery: Approx. 2 yearsLithium battery CR17450E-R2CM2: Approx. 5 years (1 transmission per day)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Included functions

Battery exhaustion function, Regular trans-mission function, Tamper transmission func-tion, Device error alarm function, Detection sensitivity changeover function, Count cycle changeover function, Controlled transmission function, Day/Night determination switch

Ambient tempera-ture range

-10ºC to +50ºC (no condensation)(The battery function may deteriorate below

0ºC or at 40ºC or higher.)Mounting position Indoor, outdoor (rainproof)

Weight Approx. 510g (Including the weight of battery 50g)Appearance Housing: AES resin　Window: PE resin

●Battery attached 　separately　<BA-103>

●Pole cover　<BP-11> *1

●Pole attachment　<BP-12>　Applicable pole diameter 　ø38 to ø43mm

●Ceiling and 　wall mount 　attachment　<BCW-401> *2

●Magnetic sheet 　(For magnet attachment)　<BR-M5> *2

●Wall mounting 　bracket　<BW-14> *3

*1 BP-12 is required.*2 BW-14 is required.*3 Used to install on a commercially available embedded switch box

171

77

Cover lock screw

70R35

●Wide ●Curtain

0.2m 0.3m60°

Adjustment rangeAdjustment range

64°2.7m4m

2m

3mMounting height

0.3m30°

Motion range180°

Motion range180°

6°Adjustment range

20m100

1.2m

Mounting height0.8 to 1.5m

Adjustment range 180°

6°Adjustment range

(When the lock tab is cut)

10m50

1.2m


When used outdoor＊Zone masking

＊＊


6°Adjustment range

10m50

1.2m


Motion range 180°

11.5m

64°



●Long

●Spot

(Note)●When using the passive sensor transmitter outdoors, it is limited to simple applications (e.g. not causing serious impact on your system or trouble to the surroundings).●Please note that the passive sensor transmitter may generate false alarms or not generate the alarm when a background object in the outdoor detection zone is influ-enced by a temperature change due to the climate.●For the above reasons, we recommend you include the outdoor infrared, combination, or fence sensors as the outdoor sensor intended for full-scale security application.■OPTIONAL ACCESSORIES

■EXTERNAL DIMENSIONS 　(UNIT: mm)■DETECTION AREA DIAGRAM

234

80

107

209.5

2-4 screw supported

Cover lock screw

91

88

Indicator


■DETECTION AREA DIAGRAM


●Dedicated 　AC adapter　<DC-0330-C>

●Pole attachment　<BP-22>　Applicable pole diameter:　φ38 to φ43mm

●Wall mounting 　bracket　<BW-24>

Horizontal area

[Side view]

[Plan view]Horizontal surface alert

1m

0 5m 10m 12mMotion range Downward area

Detection distance settable with angle adjustment of downward areaAdjustment range 12m to 3m (9 levels)

[Plan view]When the wall is on alertUnnecessary area is masked.

Fine adjustment

3° Fine adjustment

3°12m

10m

5m

12m

10m

5m

0

12m

10m

5m

12m

10m

5m

0

15°Motion pitch

90°

Adjustment range: 90°

Motion range: 180°


Catches the change of photoelectric energy caused by the movement ●of human body or other objects, and transmits an alarm signal.Available for both indoor and outdoor use.●Four types of detection areas can be selected according to the ap-●plication.Can be installed freely, like on the ceiling or wall, as well as on the ●pole using optional accessories.Has an operation restriction timer built in to reduce battery consump-●tion as much as possible.The battery normally lasts around 2 years when transmitting 100 ●times a day.Commercially available alkaline batteries can be used. Note that the ●battery life is one year in this case.Monitors the radio wave arrival status using the regular transmission ●function.Transmits the battery exhaustion signal to the receiver and the body ●indicator blinks when the battery voltage drops below a certain level.Can be installed outdoor at ease with the attached filter to reduce ●the effect of sunshine.

Detects both horizontal and downward areas to avoid erroneous ●operation when a dog or cat walks by, or due to an extended detec-tion area, and achieves stable outdoor protection.Low power wireless type that enables outdoor peripheral protection ●without wiring.Two types are available: alkaline battery or long life lithium battery.●An optional AC adaptor can be connected in a place with high ●transmission frequency.Has a radio wave arrival distance of approx. 100m (line-of-sight ●distance)

■PASSIVE SENSOR TRANSMITTER TX-103

■PASSIVE SENSOR TRANSMITTER TX-114 TX-114L

23

■SPECIFICATIONS

Model No. TX-105 (W, L, R, S)

TX-105 (WL, LL, RL, SL)

Detection system Passive infrared systemDetection area 3D (W), Surface (L), Round (R), Spot (S)Standard power

supplyAA alkaline battery x 2 included

Dedicated lithium battery included

Optional power supply

Dedicated lithium batteryBA-105・DC-1115 BA-105・DC-1115

Battery life

Approx. 2 years (100 transmissions per day)

Approx. 8 years (100 transmissions per day)

* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Included functions

Battery exhaustion function, Regular trans-mission function, Controlled transmission function, Operation test function

Mounting position Indoor (ceiling)Ambient


Weight Approx. 230g (excluding battery)

Appearance Housing: ABS resin (white)Cover: PE resin (white)

●Battery attached separately　<BA-105>

●Ceiling and 　wall mount attachment　<BCW-401>

●Wall mount attachment　<BL-5000>

●AA alkaline battery　<LR-6>

●Dedicated lithium battery　<CR17450E-R-2-CM2>


L (surface)

R (round) S (spot）

8°84°Alert range

2.5m

30°

Area setting “B”

Motion range（5°～35°）

53°0 5 12m10

1.3

61°

53°

41°

31°

23°

15°

9°

5°

2.5m30°

Area setting “B”

Motion range（2°～32°）

50 10 15 20m

30°

67.5°

42°

25°

4m

φ14m

45°

67.5°

5m

φ4m

37.4

76.5

φ111




●Ceiling and wall mount attachment　<BCW-401>




φ98.5φ111

37.4

84.5


(grommet)

35°

35°

35°

35°

35°

35°

35°

35°

φ304-R2.1

4.2

4-φ98-φ4.2

φ66.7

φ83.5

1.50.5

1

2

(Plan view)

(Side view)

84°

19.5°

2.5m

0 5 10 12（m）52°

Motion range（6.5°～26°）

Area setting “A”

6.5°

(cross section of the maximum distance of center zone)


■PASSIVE SENSOR TRANSMITTER TX-105 (W, L, R, S) TX-105 (WL, LL, RL, SL)A passive sensor transmitter for indoor ceilings, available with ●four types of alert areas and two types of power supplies.Easy to adjust detection sensitivity, count frequency, and con-●trolled transmission function using the switch in 4 steps, accord-ing to the surrounding environment and applicationOperation can be easily checked using two test modes: walk and ●transmission tests.The battery normally lasts around 2 years [TX-105 (W, L, R, S)] ●and 8 years [TX-105 (WL, LL, RL, SL)] when transmitting 100 times a day.Monitors the radio wave arrival status using the regular transmis-●sion function.Equipped with an anti-tampering function to notify when the sen-●sor is removed due to vandalism or on purpose.Transmits the battery exhaustion signal to the receiver and the ●body indicator blinks when the battery voltage drops below a certain level.If an error occurs in the internal sensor circuit, the indicator will ●blink and the error signal is transmitted.

Two pairs of optical units are incorporated in the sensor, each of which ●has twin type elements.The 3D detection area (12m max.) comprised by two pairs of optical units ●helps to keep the best position according to the protection distance, regardless of the set length, and reduces erroneous operation due to envi-ronmental factors, including small animal intrusion.Equipped with the count changeover function to set the frequency from ●1/2/3/4 times, using the mode selector according to the installation site.Equipped with the micro motion detection function to detect small move-●ments of human beings.Incorporates the transmission control function to extend the battery life by ●switching the mode selector when used in a location of high detection frequency.(10, 120, 300, 900 sec.)The sensitivity can be set in 4 steps by switching the mode selector.Has a ●detection sensitivity switching function to realize the protection using the most appropriate sensitivity according to the installation site.Adjustment range: 120%, 100%, 80%, 60%●Monitors the radio wave arrival status using the regular transmission ●function.The battery normally lasts around 6 years with the dedicated lithium bat-●tery installed.

(Transmitting 100 times a day)

W (3D)

■TWIN MIRROR TYPE PASSIVE SENSOR TRANSMITTER TX-105TWL

■DETECTION AREA 　DIAGRAM

■SPECIFICATIONSModel No. TX-105TWL

Detection system Passive infrared systemAlert area 3D alert, maximum length 12m, 17 pairsPower supply

* Either of the options on the right

CR17450E-R-2-CM2: 　1 set (Dedicated lithium battery) /3VDC-1115: 1 set (Dedicated DC pack)/11V

Battery life

Approx. 6 years (100 transmissions per day, at normal temperature)When using CR17450E-R-2-CM2* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Output 10mW max.Radio wave arrival distance Approx. 100m (outdoor line-of-sight distance)



0ºC or at 40ºC or higher.)

Mounting position Indoor: On the ceiling (Can be mounted on the wall using an optional attachment.)

Weight Approx. 250g (excluding battery)Appearance Housing: ABS resin　Cover: PE resin


24

■SPECIFICATIONSModel No. TX-123Area type W WL N NL S SL PI PIL

Detection system Passive infrared system

Alert areaW, WL: 3D alert, Maximum length 7m, 17 pairsN, NL: Surface alert, Maximum length 12m, 8 pairsS, SL: Spot alert, Maximum mount height 4m, 9 pairsPI, PIL: Horizontal alert, Maximum length 5m, 5 pairs

Included battery Alkaline battery: TX-123 (W,N,S,PI)Lithium battery: TX-123(WL,NL,SL,PIL)

PowerCR17450E-R-2-CM2 (lithium battery):1 set/3V DCLR-6 (AA alkaline battery): 　2 + Dedicated battery case/3V DC

Battery life

CR17450E-R-2-CM2: Approx. 8 years　(100 transmissions per day, at normal temperature)LR-6: Approx. 2 years 　(100 transmissions per day, at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Output 10mW max.Radio wave arrival distance Approx. 100m (outdoor line-of-sight distance)


-10ºC to +50ºC (The battery function may deteriorate below 0ºC or

at 40ºC or higher.)

Mounting positionIndoor: On the ceiling (Can be mounted on the wall using an optional attachment.)

Indoor ceiling

Weight Approx. 150g (excluding battery)Appearance Housing: ABS resin Cover: PE resin

■SPECIFICATIONSModel No. TX-106 TX-106WM

Detection system Passive infrared systemDetection area Surface, 3D, line alert selectable

Standard power supply AA alkaline battery x 2 includedOptional power supply DC-1115Battery life Approx. 2 years (100 transmissions per day)



Included functionsBattery exhaustion function, Regular trans-mission function, Controlled transmission function, Operation test function

Mounting position Indoor (desktop) Indoor (wall mount-ing)


Weight Approx. 230g (excluding battery)Appearance Housing: ABS resin (white)

●Ceiling and 　wall mount 　attachment　<BCW-401>

●Dedicated 　lithium battery　<CR17450E-R-2-CM2>

●Battery case　<TYPE32-1>


■DETECTION AREA DIAGRAM■3D alert (W)

12°

7m

Alert range

5m0m

2.5m

Approx. 86°

12°

7m

Alert range

5m0m

2.5m

Approx. 30°

Standard When the area masking sheet is used

Zone masked

Zone masked

■Horizontal 　alert (PI)

■Spot alert (S)

■Surface alert (N)

Alert range

approx. 70°

1m

5m

Standard

12ｍ10ｍ5ｍ0ｍ

2.5m 約9°

φ2.4m

3m

When the area masking sheet is used

5ｍ0ｍ

2.5m

Maximum length zone masked

50

φ100

(mounting pitch) 66.7

(mounting pitch) 83.5

6-φ4.2






90

150 8042

105

57

Cover lock

(When using DC-1115)

Angle adjustment range of the stand

90゜

Cover

SensorStand＜TX-106＞


Angle adjustment range of the stand

48150

68

42

45

45

(mounting pitch)

(mounting pitch)

4-3 screw supported

12穴

90ﾟ

(When using DC-1115)Cover lock

96

4

4

＜TX-106WM＞



■PASSIVE SENSOR TRANSMITTER TX-123 (W, N, S, PI) TX-123 (WL, NL, SL, PIL)

■PASSIVE SENSOR TRANSMITTER TX-106 TX-106WM

Slim transmitter with a thickness of just 50mm, barely noticeable, ●and easily fits into its surroundings.The alert area is switchable to narrow the alert range due to errone-●ous operation in the alert area. Using the attached masking sheet, the zone on both sides (3D alert (W)) or maximun length zone (surface alert (N)) can be masked.Equipped with the count changeover function to set the desired ●frequency from 1/2/3/4 times using the mode selector and reduce erroneous operation according to the installation site. (W/S/PI/WL/SL/PIL only)Incorporates the transmission control function (10, 300 sec.) to ●extend the battery life by switching the mode selector when used in a location of high detection frequency.Detection sensitivity changeover function available to switch detec-●tion sensitivity between High and Low, according to the installation environment and application (W/WL/N/NL only)Two types of batteries are available, long life lithium battery or easily ●accessed AA alkaline battery.Lithium battery type: Approx. 8 years (transmitting 100 times a day)・AA alkaline battery: Approx. 2 years (transmitting 100 times a day)・Monitors the radio wave arrival status using the regular transmis-●sion function.Equipped with an anti-tampering function to notify when the sensor ●is removed due to vandalism or on purpose.Equipped with a battery exhaustion signal function to send the sig-●nal when the battery voltage drops below a certain level.

Passive sensor transmitter (desktop type) TX-106Passive sensor transmitter (wall mount type) TX-106WMA transmitter with a security sensor, which detects human beings.●Three types of detection areas can be selected according to the application.●Easy to adjust detection sensitivity, count frequency, and controlled transmis-●sion function using the switch, according to the surrounding environment and applicationOperation can be easily checked using two test modes: walk and transmis-●sion tests.The battery normally lasts around 2 years when transmitting 100 times a day.●Monitors the radio wave arrival status using the regular transmission function.●Equipped with an anti-tampering function to notify when the cover is removed ●due to vandalism or on purpose.Transmits the battery exhaustion signal to the receiver and the body indicator ●blinks when the battery voltage drops below a certain level.If an error occurs in the internal sensor circuit, the indicator will blink and the ●error signal is transmitted.

approx.

0.7m

approx.

1m

10m

64°

Scale: 1/150

64°

0m 5m

15°

30°

Scale: 1/125

0m 20m10m Approx.

2m

Approx.

1.3m

W (surface) M (3D)

L (line)

25


TransmitterPower supply Coin-type lithium battery (CR2032) included

Battery life

1 transmission per day: Approx. 2 years20 transmissions per day: Approx. 1 yearTransmission cycle: 10,000 times* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.


426MHz band (3mW max.)


Mat switchMaximum

allowable weight 150kg/cm2 max.

Operation pressure 0.2 to 1.02kg/cm2

Non-sensible area Perimeter 26mmStructure Waterproof

Mounting position Indoor/outdoor flat places



Weight Approx. 8,000gAppearance EPDM (black)

■SPECIFICATIONSModel No. EXH-TK1Power supply 9V DC alkaline battery: 6LR61

Battery life

Approx. 1 year (when transmitting once a day, and ringing the alarm for 10 sec. at normal temperature)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.


frequency band


Output 10mW max.Antenna IncorporatedRadio wave arrival distance

100m max. (line-of-sight distance)

Tilt detection angle 60º to 135º from vertical lineAlarm output 28V・0.2A (ON resistance approx. 3.5Ω)

Timer settings Falling detection timer: 10, 30, 60, 120 secTransmission delay timer: 0 (None), 10 sec.

Operation switch Emergency buttonRecovery button

Alarm sound Preliminary alarm (beep, beep, beep, beep)Full alarm (Piririri, piririri)

Indicator(red LED)

Transmission (output): ONBattery exhaustion: Blinks

Included functions

Battery exhaustion functionRegular transmission function





716

616

13

64

20.5104

■SYSTEM CONFIGURATION DIAGRAM

Falling detection transmitterEXH-TK1

Low electric power wave

Approx. 100m(200m with repeaters) Receiver

Receiver unitController

<Peripheral Devices>●Controller●Channel display panel●Automatic notification device●Flasher, indicator●Sound alarm

Soft case (Accessory)



■MAT SWITCH TRANSMITTER TX-109

■FALLING DETECTION TRANSMITTER EXH-TK1

Transmits the signal generated when a mat is stepped ●on to the receiver via radio waves.Utilizes a coin type lithium battery, and no wiring is ●required.This waterproof type can be installed either indoors ●or outdoors, if on a flat surface, and used for various applications to detect an intruder or intrusion to a dangerous area.

Generates an alarm and automatically transmits a low ●power wireless signal when the owner of this unit falls and remains down for more than the set time, which is regarded as an emergency.(Falling retention timer: can bet set to 10, 30, 60, and 120 sec.)Emergency calls are also available using the push ●button.Can be mounted around the belt of trousers using the ●attached soft case.Has a transmission delay timer function (Transmitted ●10 seconds after the generation of the preliminary alarm)External notification is possible if the jack alarm ●output is connected to your PHS or mobile phone (excluding some models).


26

■SPECIFICATIONSModel No. EXH-TKB1Power supply 4.5V DC AAA alkaline battery (LR03) x 3

Battery lifeApprox. 1 year

(when transmitting (output) once a day, and ringing the alarm for 10 sec. at normal

temperature)Explosion protection

structure Intrinsically safety explosion protection (i)

Supported gas Explosion class 2, ignition group G3Official test

acceptance number No. T61940


frequency band


Output 10mW max.Antenna IncorporatedRadio wave arrival distance

100m max. (line-of-sight distance)

Tilt detection angle 60º to 135º from vertical line

Timer settings Falling detection timer: 10, 30, 60, 120 secTransmission delay timer: 0 (None), 10 sec.

Operation switch Normal button Recovery button

Alarm soundPreliminary alarm (beep, beep, beep, beep)Full alarm (Piririri, piririri)Sound volume: Approx. 90dB/1m

Indicator(red LED)

Transmission (output): ONBattery exhaustion: Blinks



0ºC or at 40ºC or higher.)Additional functions

Battery exhaustion function, Regular transmission function



23

70

112Soft case (Accessory)

復旧

0°

60° 300°

135° 225°180°地

天

DetectedDetected


Detection system Ultra-violet detection system(Detection wave length 185 to 260nm)

Detection area 10m (7cm lighter flame in front)Standard power

supplyDedicated lithium battery included

(CR17450E-R-2-CM2)Optional power

supplyDedicated AC adapter DC-1115AA alkaline battery LR-6

Battery life

Approx. 5 year (In the standby state includ-ing regular transmission)* The battery life is only for reference for the operation at normal temperature, which is not guaranteed.



Included functionsBattery exhaustion function, Regular transmission function, Tamper transmission function, Controlled transmission function



Weight Approx. 260g (excluding battery)Appearance Housing: ABS resin





●Ceiling and wall mount attachment　<BCW-401>

(Front view: Ceiling mount)(Plan view: Wall mount)

(Side view: 　　Ceiling/wall mount)

30º variable

ConditionDetection object： Gas lighter flame (Flame height: 7cm approx.)Detection timer setting： H

φ98.5φ111

φ83.566.7

35°

35° 35°

35°

69.5 37.4

8-φ4.2φ30

4.2

4-φ9

SensorLock ring

Front mark

Motion range

30°Sensor head

Detection element

Indicator (red)

Grommet

(Mounting pitch)

Base mounting hole

Base unit(Transmission unit built-in)



■EXPLOSION PROTECTION/DRIP-PROOF FALLING DETECTION TRANSMITTER (FALLING CALL) EXH-TKB1

■FLAME SENSOR TRANSMITTER TX-107

An explosion protection and drip-proof type transmit-●ter, applicable to various sites.Generates an alarm and automatically transmits a low ●power wireless signal when the person having this unit falls down for more than the set time, which is regarded as an emergency.(Falling retention timer: can bet set to 10, 30, 60, and 120 sec.)Emergency calls are also available using the push ●button.Can be mounted around the belt of trousers using the ●attached soft case.Has a transmission delay timer function (Transmitted ●10 seconds after the generation of the preliminary alarm)

* If carried in the attached soft case, it provides the drip-proof structure

A transmitter to detect the ultraviolet light included in ●flames with a high sensitivity by combining with the low power wireless security system receiver.The sensor head can be adjusted every 25° horizon-●tally and 30° vertically in 4 steps according to the installation site.The sensitivity can be set to either of 2 steps; High or ●Low, and detection timer to one of 4 steps (1, 6, 15, and 30 seconds) according to the environment.Has a low power wireless system with a long radio ●wave arrival distance (with a line-of-sight distance of 100m), strong against interference.When the battery is used as the power supply, the ●indicator blinks to notify battery exhaustion.Notifies the receiver when the sensor is removed due ●to vandalism or on purpose.Monitors the radio wave arrival status using the regu-●lar transmission function.



27

■SPECIFICATIONSModel No. TX-121Alert distance Outdoor 15m max. (indoor 30m max.)Voltage 100V AC (50/60Hz)


426MHz band(wireless equipment of low power

security system)Radio wave arrival distance Approx. 100m (line-of-sight distance)

Included functions

Infrared frequency changeover function (Ｌ↔Ｈ)

AGC circuit, frost proof cover, Regular transmission function


Mounting position Outdoor, indoor

Weight Phototransmitter: Approx. 620gPhotoreceiver: Approx. 680g

Appearance PC resin (wine red)

■WIRING DIAGRAM(Note: A qualified electrical worker should be responsible for wiring to

products of 100 V AC.)

332

7367.2


19613

(Knockout for exposed wiring)Grommet 6.5 x 12

45

Grommet for embedded wiring


83.5

(Switch box applied)

Receiver

■Multi-unit connection

100V AC

PhotoreceiverPhototransmitterPhototransmitterPhotoreceiverPhotoreceiverPhototransmitter

１２１２１２１２１２１２

Linear alert

Frequency HFrequency L Frequency L

■Standard Connection

100V AC 100V AC

２１１２

Phototransmitter Photoreceiver

Receiver

■Terminal Arrangement

１

２

１

２（50／60Hz）・２Ｗ（50／60Hz）・２Ｗ

Power100V AC 100V AC

Power

PhotoreceiverPhototransmitter


●Pole<KP-100>　(Galvanized)(2 in 1 set)

<KP-150>　(Galvanized)(2 in 1 set)

●Pole<KP-100B> (Black coating)　(2 in 1 set) Height: 100cm

<KP-150B> (Black coating)　(2 in 1 set) Height: 100cm

●L-shape pole<KP-48L> (Galvanized)　(2 in 1 set) Height: 48cm

<KP-90L> (Galvanized)　(2 in 1 set) Height: 90cm

●L-shape pole<KP-80LS>　(Chromate coating) 1　80cm (H) x 15cm (D)

<KP-80LS> (B)　(Black coating) 1　80cm (H) x 15cm (D)

●L-shape pole<KP-80LL>　(Chromate coating) 1　80cm (H) x 30cm (D)

<KP-80LL> (B)　(Black coating) 1　80cm (H) x 15cm (D)

●L-shape black pole<KP-30L>　(Galvanized) (2 in 1 set)　25cm (H) x 35cm (D)

<KP-30L> (B)　(Black coating) (2 in 1 set)　25cm (H) x 35cm (D)


■PHOTOELECTRIC SENSOR TRANSMITTER TX-121

A wireless transmitter built in to a photoelectric sen-●sor.Suitable for home security with simple application to ●a window, fence, or boundary.Stable protection guaranteed with a 2 beam AND de-●tection system with a vertical interval of 240mmSince the modulation frequency of photoelectric sen-●sor beam can be adjusted between High and Low, in-terference with an adjacent sensor can be prevented.The shade time of the photoelectric beam can be ●adjusted.Horizontal adjustment of the photoelectric axis is ●possible.(Note: Vertical adjustment is not possible.)Repeatedly transmits the alarm signal every 20 sec-●onds in the continuous transmission mode.


28

■SPECIFICATIONSModel No. TX-108Alert distance Outdoor 75m

Power supplySupplied from the solar power unit

Infrared sensor: 6V DCRadio wave transmitter: 12V DC

Built-in battery Control valve type lead batteryOperating frequency band (output) 426MHz band (10mW max.)


Additional functions Battery exhaustion function, Regular transmis-sion function, Tamper functionMounting position Outdoor


WeightInfrared sensor: Phototransmitter 1,200g, Photoreceiver 1,300gPower supply unit: Approx. 2,700gSolar panel: Approx. 9,000g

AppearanceInfrared sensor: PC resin (wine red)Power supply unit: ABS resin (black)Solar panel: Aluminum (silver)

Outdoor 75m or less

<Phototransmitter> <Photoreceiver>

95mmBeam diameterφ34mm

134mm

95mm


Photoelectric high power beam

Low electric power wave

Phototransmitter Photoreceiver

Solar panel

Solar panel

Power supply unit

Power supply unit

Receiver

To the notification device

・Alarm・Low battery・Tamper

Low electric power wave・Alarm・Regular transmission・Low battery・Tamper

■SYSTEM CONFIGURATION DIAGRAM

Solar power supply photoelectric sensor transmitter TX-108

(Mounted on φ42 pole)


Mountable pole diameterφ38 to φ43

●Embedded box　<BU-50F>

●Pole side cover　<BS-50F>


●Solar power supply unit　<BA-6SL> • Consists of the solar panel and power supply unit

• Power supply output for sensor 6V DC/12mA

• Control valve type lead battery built in

• Tamper output equipped (Power supply unit)

●Solar panel　<SB-75> (for BA-6SL)

●Dedicated battery　<BA-75> (for BA-6SL)

●Pole center mount attachment　<BP-75> (for SB-75)

●Pole base for temporary setting　<KP-1S> (for KP-100B/150B)

●Pole　<KP-100> 　(Galvanized)　<KP-100B>　(Black coating)　(φ42.7mm×1m)

●L-shape pole　(Galvanized)　<KP-90L>　(for the TX-108 Series)

●L-shape pole　(Galvanized)　<KP-48L>　(for the TX-108 Series)

●Pole　<KP-150>　(Galvanized)　<KP-150B>　(Black coating)　(φ42.7mm×1.5m)


■SOLAR POWER SUPPLY PHOTOELECTRIC SENSOR TRANSMITTER TX-108 TX-108W

Detects the blocking of a photoelectric beam by an intruder, and transmits via radio wave to the correspond-●ing receiverBoth the phototransmitter and photoreceiver receive power from the solar power supply unit.●Has a high power beam sensor with an outdoor alert distance of 75m and margin of sensitivity of 10 times.●Equipped with the modulation frequency selection function to avoid mutual interference or wraparound.●Notifies of lack of sensitivity in the indicator lightening if the reception level drops below a certain level.●It is convenient to check the margin of sensitivity after placing the cover on.Strong against interference with long radio wave arrival distance of 100m●The one-shot or repeat transmission mode can be selected using the transmission mode selection function.●Monitors the radio wave arrival status using the regular transmission function.●With the special hood attached on the sensor cover, this unit keeps alert without stopping the photoelectric ●beam even when the sensor is exposed to mist or frost.

29

◎TX-108P10 (For 1 step alert)A set of the pole KP-100B with the low consumption photoelectric sensor and solar power supply unit attached

◎TX-108P15 (For 1 step alert )A set of the pole KP-150B with the low consumption photoelectric sensor and solar power supply unit attached

◎TX-108WP15 (For 2 step alert)A set of the pole KP-150B with the low consumption photoelectric sensor and solar power supply unit attached

Solar power supply photoelectric sensor transmitterTX-108W

For 2-step alert with a pair of photoelectric sen-●sors and two solar power supply unitsBoth the phototransmitter and photoreceiver re-●ceive power from the solar power supply unit.Has a high power beam sensor with a outdoor ●alert distance of 75m, margin of sensitivity of 100 times, and margin of distance of 10 times.Equipped with the modulation frequency selec-●tion function to avoid mutual interference or wraparound

182

115

115

104

195.5


(Mounted on φ42 pole)162

Mountable pole diameterΦ38 to φ43

297.5

390

275


30

MODL NUMBER INDEX

BBA-103 22BA-105 23BA-20A 7BA-50K 9BA-6SL 28BA-75 28BCW-401 22･23･24･26BH-101 12BL-5000 23BP-11 22BP-12 22BP-22 7･22BP-75 28BPH-101 12BPR-113 13BR-M5 22BS-101K 14BS-50F 28BU-50F 28BW-14 22BW-24 7･22

CCR17450E-R-2-CM2 13･17･23･24･26CR17450E-R-CM1 16･21

DDC-0330-C 22DC-1115 13･14･17･23･24･26DC-50K 9

EEG-01 16･17EG-1000 17EXH-TK1 25EXH-TKB1 26

GGS-03 16GS-04 17

KKE-347T 16･17KP-100 27･28KP-100B 27･28KP-150 27･28KP-150B 27･28KP-1S 28KP-30L 27KP-30L(B) 27

KP-48L 27･28KP-80LL 27KP-80LL(B) 27KP-80LS 27KP-80LS(B) 27KP-90L 27･28

LLR-6 23･24･26

RRTX-300 7･11RX-10 10RX-1000 8RX-10A 10RX-2000 8RX-200A-S 3RX-200B-S 3RX-30 7RX-3000 8RX-300A-S 4RX-30A 7RX-350 6RX-360 5RX-450-S 2RX-50K 9RX-710 2RX-740 2RXB-01 8

SSB-75 28

TTX-101A 12TX-101K 14TX-101P 12TX-102A 13TX-102BK 13TX-102GS 16TX-102MG 14TX-102S400 15TX-102S600 15TX-102S780 15TX-102SK 14TX-103 22TX-104B 18TX-104K 18TX-104P 18TX-105(W,L,R,S) 23TX-105(WL,LL,RL,SL) 23

TX-105TWL 23TX-106 24TX-106WM 24TX-107 26TX-108 28TX-108W 28･29TX-108P10 29TX-108P15 29TX-108WP15 29TX-109 25TX-110 18TX-111(B) 20TX-111C-S(BL) 20TX-111C-S(G) 20TX-111-S(BL) 20TX-111-S(G) 20TX-112 17TX-113 13TX-114 22TX-114L 22TX-115(B) 21TX-115(G) 21TX-115(W) 21TX-115C(B) 21TX-115C(G) 21TX-115C(W) 21TX-115CL(B) 21TX-115CL(G) 21TX-115CL(W) 21TX-115L(B) 21TX-115L(G) 21TX-115L(W) 21TX-116 13TX-116GS 17TX-116GSL 17TX-116L 13TX-117 19TX-119LS400 16TX-119LS600 16TX-119LS780 16TX-119S400 15TX-119S600 15TX-119S780 15TX-121 27TX-122 19TX-123(W,N,S,PI) 24TX-123(WL,NL,SL,PIL) 24TYPE32-1 24

UU9VL 13･14･16

31

32

LEAF 08-11X4-1

! Safety PrecautionsPlease read the instruction manual carefully before using the security system device products for correct and safe usage.

Precautions for use

・ The radio wave arrival status is approximately 100m with a line-of-sight distance, which may be shortened depending on the building structure in the installation site and/or the surrounding environment.・ The sensor units may not operate normally in a strong electrical field or near devices that generate magnetism.・ The transmitter battery life varies depending on the battery type, transmission frequency, and/or environmental factors including ambient temperature.・ Remodeling these products is punishable by law.Doing so may also result in malfunction. Never disassemble and/or attempt to remodel.・ These products are not compatible with the conventional weak radio wave system.・ If more than one transmitter sends a signal simultaneously, they may not be properly received. Note that this is not a malfunction.・ When connecting a product to the phone line, be sure to use an automatic call unit of approved products compatible with the technical standards.

!

Please Note : This sensor is designed to detect intrusion and to initiate an alarm; it is not a burglary-preventing device. TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.

In JapanTakenaka Engineering Co., Ltd.83-1, Gojo-sotokan,Higashino, Yamashina-ku,Kyoto 607-8156, JapanTel : 81-75-501-6651Fax : 81-75-593-3816http://www.takex-eng.co.jp/ http://www.takex.com http://www.takexeurope.com

In the U.S.Takex America Inc.3350 Montgomery Drive,Santa Clara,CA 95054, U.S.A.Tel : 408-747-0100Fax : 408-734-1100

Takex Europe Ltd.Takex House, Aviary Court,Wade Road, Basingstoke,Hampshire, RG24 8PE, U.K.Tel :（+44）01256-475555Fax :（+44）01256-466268

In Australia In the U.K.Takex America Inc.Unit 16/35 Garden Road,Clayton 3168 Victoria,AustraliaTel : 03-9546-0533Fax : 03-9547-9450

Takex America Inc.Brisbane office : 1/50 LoganRoad,WoolloongabbaQueensland4102, AustraliaTel : 07-3891-3344Fax : 07-3891-3355

Documents

Middle East & African wireless products catalogue