User Manual

Microwave combi-ovenLAM7001

appliance condensates on cavity wallsand can cause corrosion.

Clean regularly the appliance to preventthe deterioration of the surface material.

Remaining fat or food in the appliancecan cause fire.

Clean the appliance with a moist softcloth. Only use neutral detergents. Donot use abrasive products, abrasivecleaning pads, solvents or metal objects.

If you use an oven spray, obey the safetyinstructions on the packaging.

Do not clean the catalytic enamel (ifapplicable) with any kind of detergent.

Internal lightThe type of light bulb or halogen lampused for this appliance is only forhousehold appliances. Do not use it forhouse lighting.

WARNING! Risk of electricalshock.

Before replacing the lamp, disconnectthe appliance from the power supply.

Only use lamps with the samespecifications.

Disposal

WARNING! Risk of injury orsuffocation.

Disconnect the appliance from the mainssupply.

Cut off the mains cable and discard it.Remove the door catch to preventchildren and pets to get closed in theappliance.

PRODUCT DESCRIPTION

General overview

1 2

8

4

3

1

2

3

6

4

5

7

1 Control panel2 Electronic programmer3 Heating element4 Microwave generator5 Lamp6 Fan7 Shelf support, removable8 Shelf positions

6

Accessories

Wire shelf

For cookware, cake tins, roasts.

Baking tray

For cakes and biscuits.

CONTROL PANEL

Electronic programmer

1110987654321

Use the sensor fields to operate the appliance.

Sensor Function Comment

1 - Display Shows the current settings of the appliance.

2ON / OFF To activate and deactivate the appliance.

3

Heating Func-tions or AssistedCooking

function or the menu: Assisted Cooking. Touch the

Heating Functions, Assisted Cooking. To activate or

4

Microwave func-tion

To activate the Microwave function. You can use itwhen the appliance is deactivated. When you use theMicrowave function with the function: Duration formore than 7 minutes and in Combi mode, the Micro-wave power cannot be more than 600 W.

7

First ConnectionWhen you connect the appliance to the mains or after a power cut, you will have toset the language, display contrast, display brightness and the time of the day.

1. Press or to set the value.2. Press

A

DE

B C

Symbol Function

Temperature The display shows the temperature.

Time Indication The display shows how long the heating

function operates. Press and atthe same time to reset the time.

Heat-up Indicator The display shows the temperature inthe appliance.

Fast Heat Up Indicator The function is active. It decreases theheat up time.

Weight Automatic The display shows that the automaticweight system is active or that weightcan be changed.

Heat + Hold The function is active.

BEFORE FIRST USE

WARNING! Refer to Safetychapters.

Initial CleaningRemove all accessories and removableshelf supports from the appliance.

Refer to "Care and cleaning"chapter.

Clean the appliance before first use.

Put the accessories and the removableshelf supports back to their initial position.

DAILY USE

WARNING! Refer to Safetychapters.

Navigating the menus1. Activate the appliance.2. Press or to select the menu

option.3. Press to move to the submenu or

accept the setting.

At each point you can go backto the main menu with .

9

23

1

*

44

Before installation

The product should only be installed by suitably persons.

The product must be installed in accordance with all local regulations.

Prior to installation, visually check the product for any damage/defects. Do not install if any issues are found.

Damaged products may cause risks to your own safety.

Installation

The appliance is intended for installation in Howdens kitchen cabinets.

Surfaces, synthetic laminates and adhesives used must be heat resistant.

Kitchen cabinets must be set level and

If there is a drawer beneath the oven, a shelf must be installed between oven and drawer.

The following installation drawings are representational and may not match exactly with your appliance.

560mm

560mm

460 mm(min)555mm

547mm

555mm

445mm

547mm

20 mm

20 mm

550 mmmin depth

550 mmmin depth

*

*

*

445mm

594mm

455mm

455mm

594mm

450 mm(min)

Note: Remove carcase rear panel to assist with ventilation.

A minimum of 150cm² ventilation gap is required as Illustrated(35mm x 500mm) cut out positioned centrally.

*

Tower Unit Installation

Built under installation

If supplied, please stick your self adhesive product rating plate here, or make a note of the product serial number below in the box below for future reference.

Serial Number : ...........................................................................................

867303247-A-142014 v1 29/01/2015