Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Ø 0.8 mm - 23 mm
micromag 20
FMB Maschinenbaugesellschaft
mbH & Co. KG
Paul-Hohe-Straße 1
97906 Faulbach
Telefon: +49 93 92/801-0
Fax: +49 93 92/801-220
The bar feeder for bar diameters of 0.8 mm - 23 mm
The micromag 20 operates on the principle of the single-step feed and allows for very economical material bar replacement times and a very process-reliable hoisting of even very small material bars. The lateral material storage is also equipped with a pivotable pilgrim step separation to optimally separate bar materials with a very small diameter and to transfer them into the guide channel.
Simple and convenient - the ERGOlogic control ...
z Modern touch control with generously sized 8.4“ screen makes an intuitive operating concept possible for a faster learning phase.
z Integrated assistant function for guided set up for inexperienced users.
Efficient and practice-oriented handling ...
z Fast and easy replacement of inserts makes the efficient adaption of the guide channel to different material diameters possible.
z An optional shifting device allows for the bar feeder to be pushed away up to 400 mm from the lathe to replace a spindle reduction, for example.
z The pilgrim step separation placed below the material storage can be pivoted upwards in just a few steps for the processing of bar diameters of < 4 mm and thus makes an optimal separation possible.
Solid design ...
z The torsion-resistant machine base made of extruded aluminium forms the solid base and guaran tees the highest vibration dampening together with inserts made of plastic
Optimal material bar guidance ...
z When using a movable spindle stock, the sychronized device couples the bar feed of the bar feeder mechanically to the spindle stock via a coupling system and thus guarantees synchronized following of the pusher.
z The guide steady in combination with the following guide tube or telescopic tube guarantee an opti mal guidance, even of small bar diameters in a bigger guide channel. For lathes with long travels along the z-axis a following steady rest is offered as additional support of the material bar.
Bar feeders
Portable control panel withintegrated magnetic holders forflexible attachment in theoperator‘s working environment
Pivotable pilgrim step separation to process bar diameters of < 4 mm
Torsion-resistant machine base made of extruded aluminium allows for optimal vibration dampening
FMB Maschinenbaugesellschaft
mbH & Co. KG
Paul-Hohe-Straße 1
97906 Faulbach
Telefon: +49 93 92/801-0
Fax: +49 93 92/801-220
micromag 20
09/2020
1
H
2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 87
G
F
E
D
C
B
A
H
G
F
E
D
C
B
A
9 10 11 12Schutzvermerk ISO 16016 beachten / Refer to protection notice ISO 16016
1 v. 1
micromag20 3200/ 1405 AD
100056384
Erstellt von/am Freigegeben von/am
12.09.2019KO-Geis
Massstab
1:15S3
Benennung
Blatt v. Blätter Format
Produkt-Typ
Artikelnummer
A2
FMB Maschinenbaugesellschaft mbH & Co. KGPaul-Hohe-Straße 197906 Faulbach Telefon: +49 (0)9392 801 0Telefax: +49 (0)9392 801 20E-Mail: [email protected]
Material
-HalbzeugAllgemein
Toleranznach ISO2786-mK
Gewicht
Zeichnungs-Nr
DokumentartOberflächen
nachISO 1302
Kanten nachISO 13715
-0,1-0,3
+0,3+0,1
10303
Oberfläche
-
5015 (Stangenlänge 3200)3415 (Stangenlänge 1600)
6015 (Stangenlänge 4200)
1165max. *(Vorschubstange ausgefahren)
265
850
Mitten
höhe
-
1250
687
42281
The bar feeder for bar diameters of 0.8 mm - 23 mm
Technical data
Units micromag 20
Ø Pusher (max.) mm 23
Bar length 1) mm 1600 3200 4200
Ø Material bars (min. - max.) mm 0,8 - 23
Loading capacity mm 235
Loading capacity (min. Ø/max. Ø) pieces 117 with 2 mm/10 with 23 mm 2)
Remnant length (max.) mm 320
Loading time (ca.) s - 153) -
Feed speed mm/s 0 - 750
Reverse speed mm/s 0 - 750
Operating voltage (50/60 Hz) V 3 x 190 - 480 4)
Power consumption kW 1,5
Compressed air supply Mpa (bar) 0,6 (6)
Weight without oil filling kg 450 600 800 1) Special lengths upon request.2) 22 pieces with pilgrim step separation.3) With pilgrim step separation ca. 3 sec. longer.4) Will be adjusted according to the lathe´s specifications upon delivery.
Standardized series of capacity adjustment sets
Capacity adjustment set 1) 5 7 10 15 23
Round D [mm] 0,8 - 5 2) 2 - 7 2) 3 - 10 2) 8 - 15 2) 12 - 23 2)
Hexagonal AF [mm] 2 - 3 3 - 4 3 - 7 7 - 11 11 - 18
Square AF [mm] 2 2 - 3 3 - 6 6 - 9 9 - 15
1) Intermediate sizes upon request. 2) Maximum dimension can only be processed by turning the bar end.
Loading possibilities
3415 (Bar length 1600)5015 (Bar length 3200)6015 (Bar length 4200)
max. 1165*(Pusher pushed out)
*Further pusher lengths upon request.
Cent
er h
eigh
t 85
0 -
1250