Upload
iman
View
48
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Microbiology of Waste Treatment/ Biodegradation of Pollutants Biology 422, Fall 2012. Michael D. Aitken Department of Environmental Sciences & Engineering Gillings School of Global Public Health. What are the pollutants of concern?. domestic wastewater or concentrated animal waste. - PowerPoint PPT Presentation
Citation preview
Microbiology of Waste Treatment/Biodegradation of Pollutants
Biology 422, Fall 2012
Michael D. AitkenDepartment of Environmental Sciences & Engineering
Gillings School of Global Public Health
What are the pollutants of concern?• domestic wastewater or concentrated animal waste
– organic compounds that would deplete oxygen if discharged into surface water (river, stream, lake, estuary, ocean); in aggregate, referred to as “oxygen demand”
– inorganic nutrients (N and P) that would stimulate excessive algal growth (eutrophication) in a surface water body
– N species that would deplete oxygen in surface water (NH4+)
or contaminate groundwater if distributed on land (NO3-)
– pathogenic microorganisms and viruses– “emerging contaminants” (e.g., pharmaceuticals, “personal
care products”, flame retardants)
Pollutants of concern (continued)• domestic solid waste
• industrial wastewater– easily degradable organic
compounds (e.g., foodproduction, breweries)
– specific organic compounds(e.g., commercial products such as pharmaceuticals)
– inorganic chemicals (e.g., N, P, S, metals)• hazardous waste
– metals– specific organic compounds (e.g., chlorinated solvents,
pesticides, aromatic hydrocarbons)
Summary of pollutant characteristics• Many pollutants are organic compounds that serve as
carbon and energy sources (electron donors) for growth of heterotrophs– many are naturally occurring compounds– some are xenobiotic
• Some organic compounds are not known to serve as a carbon or energy source for any microorganism
• Some pollutants are inorganic compounds that serve as an energy source for autotrophs– e.g., NH4
+
• Some pollutants are terminal electron acceptors required for growth on an energy source (organic or inorganic)– e.g., NO3
-, perchlorate (ClO4-), chlorinated hydrocarbons
Environmental applications of engineered microbial processes
• municipal wastewater treatment (ubiquitous indeveloped countries)
• treatment of some industrial wastewaters• controlled anaerobic decomposition in landfills
(“bioreactor landfills”)• composting of solid waste• bioremediation of contaminated soil or groundwater
– above-ground (ex situ) or in place (in situ)• biofiltration of contaminated air• common features of all systems
– open systems (anyone can join the party!)– complex communities of naturally occurring microorganisms
Microbial diversity: an under-explored universe• estimated to be ~ 5 x 106 prokaryotic species (bacteria
and archaea) on Earth– we know nothing about most of them
• for example: soil can contain thousands of species of prokaryotes per gram– at ~ 3 Mbp per prokaryotic genome,
> 1010 bp in “metagenome” of aone-gram soil sample
– human genome ~ 3 x 109 bp one gram of soil is genetically morecomplex than the human genome
– abundances range over several orders of magnitude
Julian Davies (2006): “once the diversity of the microbial world is catalogued, it will make astronomy look like a pitiful science”
Underlying principles of microbial ecology• Every organism has a unique range of capabilities, some
of which might be useful in an engineered process• Every organism has a unique range of conditions under
which it will grow or at least survive• Environmental systems are likely to be characterized by
relatively few dominant species and a large number of low-abundance species
• Open environments permit the growth of heterogeneous communities– wastes typically are heterogeneous mixtures of organic and
inorganic compounds
therefore a diverse community of microorganisms can be expected in a given environmental system, each species with its own “niche”
Factors influencing microbial communities• Environmental conditions govern which organisms
dominate (which organisms are selected)– major energy and carbon sources– dissolved oxygen concentration
• aerobes• microaerophiles• anaerobes
– concentration of other electron acceptors (e.g., NO3-, SO4
2-, Fe3+)– pH (e.g., acidophiles)– temperature (psychrophiles, mesophiles, thermophiles)– salinity– availability of nutrients (e.g., sorbed to a surface or within
a non-aqueous matrix vs. dissolved in water)
Influencing microbial selection (continued)• Native organisms are almost always better adapted to
the local environmental conditions than added organisms would be– creates problems for applications of genetically engineered
“superbugs” or commercial cultures• biological process engineering involves control of the
microbial community’s immediate environment– dissolved oxygen– pH– temperature– reactor configuration (can control availability of major
carbon sources)
THEREFORE WE HAVE CONTROL, TO A LARGE EXTENT, OVER MICROBIAL SELECTION.
THIS IS THE KEY TO SUCCESS IN THE APPLICATION OF BIOLOGICAL PROCESSES TO WASTE TREATMENT
Putting microbial ecology into practice• The science: which organisms do which functions?
what conditions do they require to grow and be competitive?
• The art: providing conditions to select for the microorganisms that carry out the desired function
• The engineeringhow much? how fast? how big? how good?
stoichiometry kinetics design analysis
How important is it to know something about the makeup of a microbial community in either waste treatment or bioremediation of a contaminated environment?
– depends on the desired function of the process; the more specific the function, the more knowledge is necessary
Examples• composting• septic tanks• decomposition
in landfills• animal waste
“treatment”in “lagoons”
• municipal orindustrial wastewater treatment
• bioremediation of contaminated soils and sediment
Technologicalsophistication
low high medium to high
Ability toachieve
objectives
easy easy to moderate moderate todifficult
Scienceneeded
little some to a lot a lot
Overview of municipal wastewater treatment
biologicaltreatment
rawwastewater
screening
gritremoval
primarysedimentation
disinfection
discharge
(advancedtreatment)
primarysludge
excess biomass
preliminary treatmentprimary treatment
filtrationnitrificationnitrogen removalphosphorus removalnutrient (N&P) removal
secondary treatment
odorVOCs
VOCs
Municipal wastewater treatment:biological processes
biologicaltreatment
rawwastewater
screening
gritremoval
primarysedimentation
disinfection
discharge
(advancedtreatment)
primarysludge
excess biomass
nitrificationnitrogen removalphosphorus removalnutrient (N&P) removal
odorVOCs
VOCs
Municipal wastewater treatment:biological processes
biologicaltreatment
rawwastewater
screening
gritremoval
primarysedimentation
disinfection
discharge
(advancedtreatment)
primarysludge
excess biomass
nitrificationnitrogen removalphosphorus removalnutrient (N&P) removal
“activated sludge” – an aerobicsuspended culture process
“rotating biological contactor” –an aerobic biofilm process
Municipal wastewater treatment:biological processes
biologicaltreatment
rawwastewater
screening
gritremoval
primarysedimentation
disinfection
discharge
(advancedtreatment)
primarysludge
excess biomass
nitrificationnitrogen removalphosphorus removalnutrient removal
odorVOCs
VOCs
anaerobic digesters
Municipal wastewater treatment:biological processes
biologicaltreatment
rawwastewater
screening
gritremoval
primarysedimentation
disinfection
discharge
(advancedtreatment)
primarysludge
excess biomass
nitrificationnitrogen removalphosphorus removalnutrient removal
odorVOCs
VOCs
biofiltration of air in a soil bed
bioscrubber
Microbial groups in waste treatment• aerobic oxidation of organic compounds: mostly
heterotrophic bacteria, some fungi• anaerobic decomposition of organic compounds:
complexorganic
substrates
fermentative bacteriaarchaea
hydrogenotrophicmethanogens
aceticlasticmethanogens
Microbial groups (continued)• ammonia removal by nitrification (aerobic process):
ammonia-oxidizing bacteria: NH4+ + 1.5O2 NO2
- + H2O + 2H+
nitrite-oxidizing bacteria: NO2- + 0.5O2 NO3
-
Net: NH4+ + 2O2 NO3
- + H2O + 2H+
• denitrification (anaerobic process): facultative heterotrophic bacteria: organic substrates + NO3
- N2
note nitrogen removal occurs by nitrification + denitrification• removal of ammonia and nitrogen by anaerobic
ammonia oxidation (“anammox”): anaerobic bacteria NH4
+ + NO2- N2 + 2H2O
• biological phosphorus removal: facultative heterotrophs– under anaerobic conditions, hydrolyze stored polyphosphate to
accumulate intracellular organic polymer (e.g., polyhydroxybutyrate)– under aerobic conditions, oxidize stored organic polymer to accumulate
phosphate as intracellular poly-phosphate
Biodegradation of individual organic chemicals
• What is “biodegradation”?– making a pollutant go away?
– reducing the impact of the pollutant?• on the environment• on human health
General mechanisms of biodegradation• growth-related
metabolism– compound is electron
donor– compound is electron
acceptor
• metabolism not related to growth of the organism– if such activity is to be
sustained, then a growth substrate has to be provided eventually
natural xenobiotic
fraction ofchemicalssupporting
growth
fraction ofchemicals
not supportinggrowth
Outcomes of biodegradation mechanisms• complete metabolism (generally associated with growth)
– mineralization of a fraction of the initial compound mass to CO2, H2O, Cl-, SO42-, etc.; e.g.,
aerobic metabolism of glucose:
C6H12O6 + 6O2 → 6CO2 + 6H2O
– assimilation of a fraction of the initial compound mass intocellular biomass
• incomplete metabolism (usually fortuitous transformation to dead-end metabolites, unrelated to growth)– e.g., transformation of trichloroethylene (TCE) to TCE epoxide by
methanotrophs via methane monooxygenase (MMO)
C2HCl3 + O2 + NADH + H+ → C2HCl3O + NAD+ + H2O
mineral (inorganic) products
MMO
General features of metabolism• whether growth-related or not, virtually all microbial
transformations of interest are catalyzed by enzymes• if the compound is metabolized completely, metabolism
involves one or more pathways, or sequences of enzyme-catalyzed steps
• enzymes are coded for by genes• synthesis of an enzyme requires that the relevant gene(s) be
expressed (“turned on”)
Problems with non-growth metabolism
• the necessary enzyme(s) for transformation of the compound is usually not induced by the presence ofthe compound
• the compound is usually not transformed extensively (may be transformed only one step)– product(s) of incomplete metabolism will
accumulate extracellularly– product(s) can be just as toxic as parent
compound (or more so)– product(s) might be consumed by other
organisms; this is one advantage of microbial communities over pure cultures
• competition between the pollutant and the “natural” substrate for the enzyme(s) capable of transforming the pollutant must be considered
Postulates for biodegradation• a biochemical mechanism for transformation or
complete metabolism of the compound must exist
• one or more organisms possessing the relevant gene(s) must be present in the system– indigenous organisms– organisms inoculated into system (bioaugmentation)
• gene(s) coding for the relevant enzyme(s) must be expressed– by the compound itself– induced by some other means
• mechanism must be manifested
Why biodegradation mechanisms might not be manifested
• limited bioavailability (generally an issue for hydrophobic chemicals, particularly in the subsurface)
• concentration effects– substrate inhibition at high concentration– concentration too low to support growth
• inhibition by other chemicals in the system• other conditions not favorable
– pH– nutrient limitations– electron acceptor limitations