10
MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC Output type Digital Digital Analog Digital / Analog Figure / Diagram 1/D 1 / DD 1 / IU 1 / DIU Nominal sensing distance 250 mm 250 mm 250 mm 250 mm Max. sensing distance 350 mm 350 mm 350 mm 350 mm Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / ± 0.15 % 2.5 mm / ± 0.15 % 2.5 mm / ± 0.15 % 2.5 mm / ± 0.15 % Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm Operating voltage / Ripple 9 to 30 Vdc / ± 10% 9 to 30 Vdc / ± 10 % 9 to 30 Vdc / ± 10 % 9 to 30 Vdc / ± 10 % Max. switching current 500 mA 500 mA - 500 mA ( Digital Output ) Current consumption £ 80 mA £ 80 mA £ 80 mA £ 80 mA Digital Output PNP PNP double - PNP Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.) Analog load impedance - - 250W to 1.2kW / voltage:>2kW 250W to 1.2kW / voltage:>2kW Max. frequency / resp. time 11 Hz / 50 ms 11 Hz / 50 ms 50 ms 11 Hz / 50 ms Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse Indicators op. output and prog. op. output and prog. op. output and prog. op. output and prog. Digital Output programmable NO or NC NO or NC - NO or NC Analog output programmable - - increasing/decreasing increasing/decreasing Programming mode manual or software manual or software manual or software manual or software Programming by software Link Control (not included) Link Control ( not included ) Link Control ( not included ) Link Control ( not included ) Operating temperature range -25ºC to + 70ºC -25ºC to + 70ºC -25ºC to + 70ºC - 25ºC to + 70ºC Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT Protection class / Weight IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g Connector Software Link Control - software for sensor configuration for PC included RS 232 adapter. 12.1 Dimensions ULTRASONIC SENSOR Ultrasonic Proximity Sensor Electrical Connection 250 mm Sensing Distance DC 3-digit display Digital and Analog Output M30 -10 cm 0 cm 10 cm 0cm 10 cm 20 cm 30 cm 40 cm 3 2 - 9 - 30Vdc + DD 5 4 1 3 1 4 - 9 - 30Vdc + D 5 2 9 - 30 Vdc IU 3 2 - + 5 4 1 Fig.1 4 1 2 3 5 51 84 T1 D1 D2 T2 cm mm % SW Microsonic 3 1 4 - 9 - 30Vdc + DIU 2 5 * Model with cable on request.

MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC

Output type Digital Digital Analog Digital / Analog

Figure / Diagram 1 / D 1 / DD 1 / IU 1 / DIU

Nominal sensing distance 250 mm 250 mm 250 mm 250 mm

Max. sensing distance 350 mm 350 mm 350 mm 350 mm

Blind zone 30 mm 30 mm 30 mm 30 mm

Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz

Hysteresis / Repeatability 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 %

Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K

Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / � 10% 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA - 500 mA ( Digital Output )

Current consumption � 80 mA � 80 mA � 80 mA � 80 mA

Digital Output PNP PNP double - PNP

Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.)

Analog load impedance - - 250W to 1.2kW / voltage:>2k� 250W to 1.2kW / voltage:>2k�

Max. frequency / resp. time 11 Hz / 50 ms 11 Hz / 50 ms 50 ms 11 Hz / 50 ms

Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse

Indicators op. output and prog. op. output and prog. op. output and prog. op. output and prog.

Digital Output programmable NO or NC NO or NC - NO or NC

Analog output programmable - - increasing/decreasing increasing/decreasing

Programming mode manual or software manual or software manual or software manual or software

Programming by software Link Control (not included) Link Control ( not included ) Link Control ( not included ) Link Control ( not included )

Operating temperature range -25ºC to + 70ºC -25ºC to + 70ºC -25ºC to + 70ºC - 25ºC to + 70ºC

Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector*

Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT

Protection class / Weight IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.1

Dimensions

ULTRASONIC SENSOR

Ultrasonic Proximity Sensor

Electrical Connection

250 mm Sensing DistanceDC

3-digit displayDigital and Analog Output

M30

-10 cm

0 cm

10 cm

0 cm

10 cm

20 cm

30 cm

40 cm

3

2

-

9 - 30Vdc

+

DD

5

4

1

3

1

4

-

9 - 30Vdc

+D

5

2

9 - 30 Vdc

IU

3

2

-

+

5

41

Fig.1

4

1 2

3

5

51

84

T1

D1D

2T

2

cm

mm

%

SW

Microsonic

3

1

4

-

9 - 30Vdc

+

DIU

2

5

* Model with cable on request.

Page 2: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

MIC+35/D/TC MIC+35/DD/TC MIC+35/IU/TC MIC+35/DIU/TC

Output type PNP 2 x PNP Analog Digital / Analog

Figure / Diagram 2 / D 2 / DD 2 / IU 2 / DIU

Nominal sensing distance 350 mm 350 mm 350 mm 350 mm

Max. sensing distance 600 mm 600 mm 600 mm 600 mm

Blind zone 60 mm 60 mm 60 mm 60 mm

Transducer frequency 400 KHz 400 KHz 400 kHz 400 KHz

Hysteresis / Repeatability 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 %

Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K

Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA - 500 mA ( Digital Output )

Current consumption � 80 mA � 80 mA � 80 mA � 80 mA

Digital Output PNP PNP double - PNP

Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.)

Analog load impedance - - cor.:250W to 1.2kW / voltage:>2k� cor.:250W to 1.2kW / voltage:>2k�

Max. frequency / resp. time 8 Hz / 70 ms 8 Hz / 70 ms 70 ms 8 Hz / 70 ms

Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse

Output indication (tri-color leds) op. output and prog. op. output and prog. op. output and prog. op. output and prog.

Digital Output programmable NO or NC NO or NC - NO or NC

Analog output programmable - - increasing/decreasing increasing/decreasing

Programming mode manual or software manual or software manual or software manual or software

Programming by software Link Control ( not included ) Link Control ( not included ) Link Control ( not included ) Link Control ( not included )

Operating temperature range -25º C to + 70º C -25º C to + 70ºC -25º C to + 70º C -25ºC to + 70ºC

Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector*

Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT

Protection class / Weight IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.2

ULTRASONIC SENSOR

Electrical Connection

Ultrasonic Proximity Sensor

Dimensions

M30

3

1

4

-

9 - 30Vdc

+D

5

2

9 - 30 Vdc

IU

3

2

-

+

5

41 4

1 2

3

5

3

2

-

9 - 30Vdc

+

DD

5

4

1

51

84

T1

D1D

2T

2

cm

mm

%

SW

0 cm

-20 cm

10 cm

50 cm

30 cm

20 cm

70 cm

60 cm

40 cm

20 cm10 cm

0 cm-10 cm

Fig.2

350 mm Operating DistanceDC

3-digit DisplayDigital and Analog Output

Microsonic

3

1

4

-

9 - 30Vdc

+

DIU

2

5

* Model with cable on request

Page 3: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

MIC+130/DIU/TC MIC+130/DD/TC MIC+130/IU/TC MIC+130/DIU/TC

Output type PNP 2 x PNP Analog Digital / Analog

Figure / Diagram 3 / D 3 / DD 3 / IU 3 / DIU

Nominal sensing distance 1300 mm 1300 mm 1300 mm 1300 mm

Max. sensing distance 2000 mm 2000 mm 2000 mm 2000 mm

Blind zone 200 mm 200 mm 200 mm 200 mm

Transducer frequency 200 KHz 200 KHz 200 kHz 200 kHz

Hysteresis / Repeatability 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 %

Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K

Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / � 10% 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA - 500 mA

Current consumption � 80 mA � 80 mA � 80 mA � 80 mA

Digital Output PNP PNP double - PNP

Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.)

Analog load impedance - - 250� to 1,2k� / voltage: >2k� 250� to 1,2k�/ voltage: >2k�

Max. frequency / Resp. time 6 Hz / 110 ms 6 Hz / 100 ms 110 ms 6 Hz / 110 ms

Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse

Output indication (tri-color leds) op. output and prog. op. output and prog. op. output and prog. op. output and prog.

Digital Output programmable NO or NC NO or NC - NO or NC

Analog output programmable - - increasing/decreasing increasing/decreasing

Programming mode manual or software manual or software manual or software manual or software

Programming by software Link Control ( not included ) Link Control ( not included ) Link Control ( not included ) Link Control ( not included )

Operating temperature range -25º C to + 70º C -25º C to + 70ºC -25º C to + 70ºC -25ºC to + 70ºC

Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector*

Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT

Protection class / Weight IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g IP 67 / 150 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.3

Dimensions

ULTRASONIC SENSOR

Ultrasonic Proximity Sensor

Electrical Connection

Microsonic

1300 mm Operating DistanceDC

3-digit DisplayDigital and Analog Output

51

84

T1

D1D

2T

2

cm

mm

%

SW0 m

-0,5m

0,5m 2,5 m

2 m

1,5 m

1 m

0 m0,5 m

3

1

4

-

9 - 30Vdc

+D

5

2

9 - 30 Vdc

IU

3

2

-

+

5

41 4

1 2

3

5

3

2

-

9 - 30Vdc

+

DD

5

4

1

Fig.3

M30

3

1

4

-

9 - 30Vdc

+

DIU

2

5* Model with cable on request

Page 4: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

MIC+340/D/TC MIC+340/DD/TC MIC+340/IU/TC MIC+340/DIU/TC

Output type PNP 2 x PNP Analog Digital / Analog

Figure 4 / D 4 / DD 4 / IU 4 / DIU

Nominal sensing distance 3400 mm 3400 mm 3400 mm 3400 mm

Max. sensing distance 5000 mm 5000 mm 5000 mm 5000 mm

Blind zone 350 mm 350 mm 350 mm 350 mm

Transducer frequency 120 KHz 120 KHz 120 kHz 120 kHz

Hysteresis / Repeatability 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 %

Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K

Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / � 10% 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA - 500 mA ( Digital Output )

Current consumption � 80 mA � 80 mA � 80 mA � 80 mA

Digital Output PNP PNP double - PNP

Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.)

Analog load impedance - - 250� to 1,2k� / voltage: >2k� 250� to 1,2k� / voltage: >2k�

Max. frequency / resp. time 3 Hz / 180 ms 3 Hz / 180 ms 180 ms 3 Hz / 180 ms

Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse

Output indication (tri-color leds) op. output and prog. op. output and prog. op. output and prog. op. output and prog.

Digital Output programmable NO or NC NO or NC - NO or NC

Output programm - - increasing/decreasing increasing/decreasing

Programming mode manual or software manual or software manual or software manual or software

Programming by software Link Control ( not included ) Link Control ( not included ) Link Control ( not included ) Link Control ( not included )

Operating temperature range -25º C to + 70º C -25º C to + 70ºC -25º C to + 70ºC -25ºC to + 70ºC

Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector*

Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT

Protection class / Weight IP 67 / 210 g IP 67 / 210 g IP 67 / 210 g IP 67 / 210 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.4

ULTRASONIC SENSOR

Electrical Connection

Ultrasonic Proximity Sensor

Dimensions

Microsonic

M30

3400 mm Operating SensingDC

3-digit DisplayDigital and Analog Output

49.5mm

19.5mm

102 mm

047,5

M30x1

,5

SEXT. 36x5

T1

D1D

2T

2

cm

mm

%

-1m-2

m

0 m

1 m

2 m 6 m

5 m

4 m

3 m

1 m2 m

0 m

3

1

4

-

9 - 30Vdc

+D

5

2

3

2

-

9 - 30Vdc

+

DD

5

4

1 4

1 2

3

5

3

2

-

9 - 30Vdc

+

DD

5

4

1

Fig.4

3

1

4

-

9 - 30Vdc

+

DIU

2

5

* Model with cable on request

Page 5: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

PNP MIC+600/D/TC MIC+600/DD/TC MIC+600/IU/TC MIC+600/DIU/TC

Output type PNP 2 x PNP Analog Digital / Analog

Figure / Diagram 5 / D 5 / DD 5 / IU 5 / DIU

Nominal sensing distance 6000 mm 6000 mm 6000 mm 6000 mm

Max. sensing distance 8000 mm 8000 mm 8000 mm 8000 mm

Blind zone 600 mm 600 mm 600 mm 600 mm

Transducer frequency 80 KHz 80 KHz 80 KHz 80 KHz

Hysteresis / Repeatability 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 % 2.5 mm / � 0.15 %

Resolution / thermical drift 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K 0.18 mm / < 2 % / K

Standard target 500 x 500 mm 500 x 500 mm 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / � 10% 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 % 9 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA - 500 mA

Current consumption � 80 mA � 80 mA � 80 mA � 80 mA

Digital Output PNP PNP double - PNP

Analog output - - 0 to 10 V or 4-20 mA (autom.) 0 to 10 V or 4-20 mA (autom.)

Analog load impedance - - 250W to 1.2kW / voltage: >2k� 250W to 1.2kW / voltage: >2k�

Max. frequency / resp. time 2 Hz / 240 ms 2 Hz / 240 ms 240 ms 2 Hz / 240 ms

Circuit protection short-circuit and reverse short-circuit and reverse short-circuit and reverse short-circuit and reverse

Output indication (tri-color leds) op. output and prog. op. output and prog. op. output and prog. op. output and prog.

Digital Output programmable NO or NC NO or NC - NO or NC

Analog output programmable - - increasing/decreasing increasing/decreasing

Programming mode manual or software manual or software manual or software manual or software

Programming by software Link Control ( not included ) Link Control ( not included ) Link Control ( not included ) Link Control ( not included )

Operating temperature range -25º C to + 70º C -25º C to + 70ºC -25º C to + 70ºC -25ºC to + 70ºC

Connection 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector* 5-pin M12 connector*

Housing material nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT nickel plated brass / PBT

Protection class / Weight IP 67 / 270 g IP 67 / 270 g IP 67 / 270 g IP 67 / 270 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.5

Dimensions

ULTRASONIC SENSOR

Ultrasonic Proximity Sensor

Electrical Connection

Microsonic

M30

Operating distance 6000 mmDC

3-digit DisplayDigital and Analog Output

49.5mm

22.5mm

105 mm

065

M30x1

,5

SEXT. 36x5

T1

D1D

2T

2

cm

mm

-2m

0 m

2 m1 m

-1m

2 m3 m

4 m

8 m9 m

7 m

6 m

5 m

1 m

0 m

3

1

4

-

9 - 30Vdc

+D

5

2

3

2

-

9 - 30Vdc

+

DD

5

4

1 4

1 2

3

5

3

2

-

9 - 30Vdc

+

DD

5

4

1

Fig.5

3

1

4

-

9 - 30Vdc

+

DIU

2

5

* Model with cable on request

Page 6: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

PNP ZWS-15/CD/QS 4 to 20 mA current ZWS-15/CI/QS

NPN ZWS-15/CE/QS 0 to 10V voltage ZWS-15/CU/QSFigure / Diagram 6 / CD-PNP; CE-NPN 6 / CD-PNP; CE-NPN

Nominal sensing distance 150 mm 150 mm

Max. sensing distance 250 mm 250 mm

Blind zone 20 mm 20 mm

Sensitivity adjust yes - digital yes - digital

Transducer frequency 380 kHz 380 kHz

Hysteresis / Repeatability 2 mm / ± 0.15% 2 mm / ± 0.15 %

Resolution / thermical drift 0.20 mm / 0.17 % / ºC 0.20 mm / 0.17% / ºC

Standard target 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / ± 10% 9 to 30 Vdc / ± 10 %

Max. switching current 200 mA 200 mA

Current consumption < 25 mA < 25 mA

Max. frequency / Resp. time 25 Hz / 24 ms 25 Hz / 40 ms

Circuit protection short-circuit and reverse short-circuit and reverse

Output indication -green led operating voltage operating voltage

Output indication - yellow led output output

Sensitivity adjust mode teach-in button teach-in button

Operating mode NO or NC (programmable) NO or NC (programmable)

Operating temperature range - 20 ºC to + 70º C - 20 ºC to + 70 ºC

Protection class IP 67 IP 67

Connection 4-pin M8 connector 4-pin M8 connector

Housing material ABS ABS

Weight 10 g 10 g

V84 Connector Model

12.6

ULTRASONIC SENSOR

Electrical Connection

Ultrasonic Proximity Sensor

Dimensions

Microsonic

49.5mm

22.5mm

105 mm

065

M30x1

,5

SEXT. 36x5

T1

D1D

2T

2

cm

mm

0 cm

1 cm

2 cm

150 mm200 mm

250 mm

0 mm

100 mm

20 mm

2

1 3

4

3

1

4

-

9 - 30Vdc

+CD

2

Fig.6

Operating distance150 mm

ZWS

3

1

49 - 30 Vdc

-

+CI

I

R

2

3

2

-

9 - 30Vdc

+CU

1

4

R

U

1

4

-

9 - 30Vdc

+

CE

2

3

Page 7: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

PNP ZWS-24/CD/QS 4 to 20 mA current ZWS-24/CI/QS

NPN ZWS-24/CE/QS 0 to 10V voltage ZWS-24/CU/QS

Figure / Diagram 7 / CD-PNP; CE-NPN 7 / CD-PNP; CE-NPN

Nominal sensing distance 240 mm 240 mm

Max. sensing distance 350 mm 350 mm

Blind zone 50 mm 50 mm

Sensitivity adjust yes - digital yes - digital

Transducer frequency 380 kHz 380 kHz

Hysteresis / Repeatability 2 mm / ± 0.15% 2 mm / ± 0.15 %

Resolution / thermical drift 0.20 mm / 0.17 % / ºC 0.20 mm / 0.17% / ºC

Standard target 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / ± 10% 9 to 30 Vdc / ± 10 %

Max. switching current 200 mA 200 mA

Current consumption < 30 mA < 30 mA

Max. frequency / Resp. time 14 Hz / 42 ms 14 Hz / 42 ms

Protection circuit short-circuit and reverse short-circuit and reverse

Output indication -green led operating voltage operating voltage

Output indication - yellow led output output

Sensitivity adjust mode auto-teach button auto-teach button

Operating mode NO or NC (programmable) NO or NC (programmable)

Operating temperature range - 20 ºC to + 70º C - 20 ºC to + 70º C

Protection class IP 67 IP 67

Connection 4-pin M8 connector 4-pin M8 connector

Housing material ABS ABS

Weight 10 g 10 g

V84 Connector Model

12.7

Dimensions

ULTRASONIC SENSOR

Ultrasonic Proximity Sensor

Electrical Connection

Microsonic

32 mm

12 mm

12 mm

24 mm

21,6mm

3,9 mm

2,6 mm

4.2 mm

3.2 mm

0 cm

1 cm

2 cm

150 mm200 mm250 mm

0 mm

100 mm

25 mm

2

1 3

4

3

1

4

-

9 - 30Vdc

+CD

2

Fig.7

300mmOperating distance

ZWS

1

4

-

9 - 30Vdc

+

CE

2

3 3

1

49 - 30 Vdc

-

+CI

I

R

2

3

2

-

9 - 30Vdc

+CU

1

4

R

U

Page 8: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

PNP ZWS-70/CD/QS 4 to 20 mA current ZWS-70/CI/QS

NPN ZWS-70/CE/QS 0 to 10V voltage ZWS-70/CU/QS

Figure / Diagram 8 / CD-PNP; CE-NPN 8 / CD-PNP; CE-NPN

Nominal sensing distance 700 mm 700 mm

Max. sensing distance 1000 mm 1000 mm

Blind zone 120 mm 120 mm

Sensitivity adjust yes - digital yes - digital

Transducer frequency 300 kHz 300 kHz

Hysteresis / Repeatability 2 mm / ± 0.15% 2 mm / ± 0.15 %

Resolution / thermical drift 0.20 mm / 0.17 % / ºC 0.20 mm / 0.17% / ºC

Standard target 500 x 500 mm 500 x 500 mm

Operating voltage / Ripple 9 to 30 Vdc / ± 10% 9 to 30 Vdc / ± 10 %

Max. switching current 200 mA 200 mA

Current consumption < 30 mA < 30 mA

Max. frequency / Resp. time 14 Hz / 42 ms 14 Hz / 42 ms

Protection circuit short-circuit and reverse short-circuit and reverse

Output indication -green led operating voltage operating voltage

Output indication - yellow led output output

Sensitivity adjust mode teach-in buttom teach-in buttom

Operating mode NO or NC (programmable) NO or NC (programmable)

Operating temperature range - 20 ºC to + 70º C - 20 ºC to + 70º C

Protection class IP 67 IP 67

Connection 4-pin M8 connector 4-pin M8 connector

Housing material ABS ABS

Weight 10 g 10 g

V84 Connector Model

12.8

ULTRASONIC SENSOR

Electrical Connection

Ultrasonic Proximity Sensor

Dimensions

Microsonic

32 mm

12 mm

12 mm

24 mm

21,6mm

3,9 mm

2,6 mm

4.2 mm

3.2 mm

0 cm

1 cm

2 cm

700 mm

0 cm70 mm

1000 mm

280 mm

2

1 3

4

3

1

4

-

9 - 30Vdc

+CD

2

Fig.8

300mmOperating distance

ZWS

1

4

-

9 - 30Vdc

+

CE

2

3 3

1

49 - 30 Vdc

-

+CI

I

R

2

3

2

-

9 - 30Vdc

+CU

1

4

R

U

Page 9: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

PNP UCS-15/CDD/QM

NPN UCS-15/CEE/QM

Figure / Diagram 9

Nominal sensing distance 150 mm

Max. sensing distance 250 mm

Blind zone 20 mm

Sensitivity adjust yes - digital

Transducer frequency 380 kHz

Hysteresis / Repeatability 2 mm / ± 0.15%

Resolution / thermical drift 0.20 mm / � 2 %

Operating voltage / Ripple 9 to 30 Vdc / ± 10% /

Protection circuit short-circuit and reverse

Max. switching current 200 mA

Current consumption < 25 mA

Max. frequency / Resp. time 25 Hz / 40 ms

Protection circuit short-circuit and reverse

Output indication -green led operating voltage

Output indication - yellow led output

Sensitivity adjust mode auto-teach button

Output 2 x NO

Programming by software Link Control ( not included )

Operating temperature range - 20 ºC to + 70º C

Protection class IP 67

Connection 5-pin M12 connector

Housing material plastic parts: PBT

Weight 75 g

Connector Software

Link Control - software for sensor configuration

for PC included RS 232 adapter.

12.9

Dimensions

ULTRASONIC SENSOR

Ultrasonic Proximity Sensor

Electrical Connection

Microsonic

0 cm

1 cm

2 cm

150 mm200 mm

250 mm

0 mm

100 mm

20 mm

4

1 2

3

5

3

4

-

20 - 30Vdc

CD1

+5

2

Fig.9

Operating distance250mm

DC - 2 NA

UCS

1

4

9 - 30Vdc

+CEE

3-

2

5

Page 10: MIC+25/D/TC MIC+25/DD/TC MIC+25/IU/TC MIC+25/DIU/TC...Blind zone 30 mm 30 mm 30 mm 30 mm Transducer frequency 320 KHz 320 KHz 320 kHz 320 kHz Hysteresis / Repeatability 2.5 mm / 0.15

DBK-4/CD/O/M18 E+S DBK-5/CDD/O/M30 E+S

Output type PNP PNP - double

Figure 7 8

Op. distance (transmitter/receiver) 40 mm � 3 mm 50 mm � 3 mm

Permissible angular deviation � 45º � 45º

Blind zone 7 mm 7 mm

Transducer frequency 400 KHz 200 kHz

Sensing object papers. metal sheets papers. metal sheets

Detectable papers 20 to 1200 g / m2 120 g / m2

Standard target sheet metal up to 0.3 mm sheet metal up to 0.7 mmm

Operating voltage / Ripple 20 to 30 Vdc / � 10 % 20 to 30 Vdc / � 10 %

Max. switching current 500 mA 500 mA

Current consumption � 35 mA � 45 mA

Protection circuit short-circuit and reverse short-circuit and reverse

Response time 24 ms 25 ms

Deactivated control input white wire desconnected or con. to +5V <U < +17V white wire desconnected or con. to +5V <U < +17V

Activated control input white wire con. to +VDC > 19V or -VDC< 3V white wire con. to +VDC > 19V or -VDC< 3V

Output indication green led:operating / red led: double sheet green led:operating / red led: double sheet

Sensitivity adjust not necessary not necessary

Operating temperature range + 5ºC to + 60 ºC + 5ºC to + 60 ºC

Protection class IP 65 IP 65

Connection 2 m PVC cable 4 x 22 AWG receiver: 1.2 m PVC cable. trasmitter:1 m PVC cable

Housing material nickel plated brass / PBT nickel plated brass / PBT

Weight 270 g 380 g

Mounting angle A= 27� B= 45� A= 10� - 18� B= 35� - 45�

Electrical Connection Cable colors

M

BN brown

BR branco

12.10

ULTRASONIC SENSOR

Electrical Connection

Ultrasonic Proximity Sensor

Dimensions

A

B

BU blue

BK black

26

50± 3

111.5

mm

mm

21mm

403

111,5mm

Fig.7 Fig.8

Microsonic

M18 / M30

Double SheetControl

Mounting

12 - 30Vdc

TRANSMITTERRD

BU

RECEIVER

BURD

BN

BU

WH

BKControlInput

+

-