8/13/2019 MIC Project Seminar
1/2
Jimma University
Jimma Institute of Technology
Department of Electrical and Computer Engineering
Microcomputer and Interfacing - Supplementary Projects (Max.
Marks = 30%)
You are expected to finalize the project work until
JanuaryJanuaryJanuaryJanuary 16, 201416, 201416, 201416, 2014. The
assignment to individual project is according to the alphabetical
order of students list. And
there should be a maximum of 10 students per project; i.e., the
1st10 students in a group should
claim the 1stproject, etc.)
Project grading criteria:1. Designing- 20%2. Originality and
Innovative Idea 15%3. Successfully making a working prototype 15%4.
Designing a PCB for implementing the project 10%5. Implementing
Project in PCB 10%6. Presentation & demonstration of the
project 25%7. A4 page report 15%
List ofList ofList ofList of
ProjectsProjectsProjectsProjects:::: (For Computer Engineering
Stream)(For Computer Engineering Stream)(For Computer Engineering
Stream)(For Computer Engineering Stream)
1. Develop a LED matrix based display that can display 16x16
gray scale images.2. PC Based 7 Segment Rolling Message Display3.
Interface Stepper Motor to 8086 using 8255 (to rotate it
4. Traffic light control system using 80865. Finger Print
Verification for Identity Checking6. Interface Digital-to-Analog
converter to 8086 using 8255 to generate Square Wave,
Ramp Wave, Triangular Wave & Staircase Wave form....
7.
Develop a temperature Control system using 80868. Develop a USB
PC shutdown system
8/13/2019 MIC Project Seminar
2/2
Jimma University
Jimma Institute of Technology
Department of Electrical and Computer Engineering
Microcomputer and Interfacing - Supplementary Projects (Max.
Marks = 30%)
You are expected to finalize the project work until
JanuaryJanuaryJanuaryJanuary 16, 201416, 201416, 201416, 2014. The
assignment to individual project is according to the alphabetical
order of students list. And
there should be a maximum of 10 students per project; i.e., the
1st10 students in a group should
claim the 1stproject, etc.)
Project grading criteria:1) Designing- 20%2) Originality and
Innovative Idea 15%3) Successfully making a working prototype 15%4)
Designing a PCB for implementing the project 10%5) Implementing
Project in PCB 10%8. Presentation & demonstration of the
project 25%9. A4 page report 15%
List ofList ofList ofList of
ProjectsProjectsProjectsProjects:::: ((((For IndustrialFor
IndustrialFor IndustrialFor Industrial ControlControlControlControl
EngineeringEngineeringEngineeringEngineering
Stream)Stream)Stream)Stream)
1. Interface ADC to 8086 using 8255 to read Digital value from
ADC.2. Interface a real time clock using 58167 IC3. Interface
stepper motor using switches connected to 8255 (450CW in
half-step)4.
Switch1 => half step clockwise (b) Switch2 => full step
anticlockwise
5. Develop a system in 8086 to control the speed of DC motor.6.
Develop a system in 8086 to Blink an LED in following order based
on key press.
(a)Key pressed=>Blink LED alternate (b)Key not
pressed=>Blink LED7. Control PC with TV remote8.
Microcontroller-based power converter9. Using microcontroller
Develop a BJT tester.10.
Automatic night lamp with morning alarm
11. Soil Moisture Content based Automatic Motor Starter for
Irrigation Purpose12. Microprocessor-based Water level
Controller13. Digital Delay on Sound Sampler with Computer
Interface14. Street Light Control Through Computer
