Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s need. It is possible to install on board duplex mud pumps, centrifugal pumps and lubricators for down the hole hammers.

The rig can be either crawler or truck mounted with the option of Massenza’s automatic drill

pipe changer. The rig is designed to work with several drilling methods: direct circulation, down the hole hammers and augers. It is suitable for water well, geotechnical and geothermal drilling applications.

All controls are located for ease of operation and safety with the rig positioning controls on a fixed panel and the drilling controls on a remote rotating arm or extension cable.

M.I.6 Drilling Rig

Unit 2/2 Commerce CourtClontarf, QLD 4019

Tel: (07) 3114 2363Fax: (07) 3284 9990

E: sales@drillexperts.com www.drillexperts.com

Call today for a quote – (07) 3114 2363

Unit 2/2 Commerce Court, Clontarf, QLD 4019 • Tel: 07 3114 2363 Fax: (07) 3284 9990

www.drillexperts.com

SpecificationsDrilling Rig MI6

UndercarriageWidth 1600 mm – 4 ft 3”Pad Width 300 mm – 1 ftMax speed 2 km/h – 1.25 mphTruck Recommended 4x4

Power Pack Standard OptionalDiesel Engine VM R 756 IE3 VM D 706 IE2Engine Power 156 Hp (115 kW) 131 Hp (96 Kw)Oil Tank 300l – 79.2 gal 300l – 79.2 galFuel Tank 130l – 34.3 130l – 34.3

Mast Standard OptionalPull up 5600 daN – 12590 lbf 6500 daN – 14625 IbfPull down 5600 daN – 2590 lbf 6500 daN – 14625 IbfTotal length 6400 mm-21 ft 6400 mm-21 ftFeed Stroke 3.7 m – 12 ft 2” 6.1 m – 20 ftMast Sliding 800 mm – 2 ft 7” 800 mm – 2 ft 7”

Rotary Head TM\6 TM6.1 TM6ClGears 2 2 3Max Torque 8000 Nm – 5900 lbf·ft 6000 Nm – 4428 lbf·ft 8130Nm – 6000 Ibf ftMax Speed 120 Rpm 152 Rpm 232 RpmHead Passage 2”

Clamps MS300 MS360Max. passage 305 mm – 12” 360 mm – 14”Min. handling 50 mm – 2” 76 mm – 3”Camping force 170 kN – 38220 lbf 170 kN – 38220 lbfBreaking torque 23500 Nm – 17330 lbf·ft 23500 Nm – 17330 lbf·ft

Winch Standard Wire lineMax pull 2200 daN – 4946 lbf 600 daN – 1350 lbfDrum capacity 30 m – 98 ft 4” 302 m – 991 ftRope speed 26 m/min – 85 ft/min 107 m/min – 351 ft/minWeight 6500 kg – 14330 lbs

Drilling Capacity Distance (m)Rotary mud and DTH 9”7/8 210BQ (60mm rods) 950NQ (75mm rods) 800HQ (96 mm rods) 550PQ (122mm rods) 350

Optional – Rotary Head Massenza TM20 CR9: High quality steel case, pinion-crown transmission, alloy treated steel shafts and gears mounted on bearings, oil bath lubrication. Powered by hydraulic motor with manual speed gear change. Passage 0-100mm. Four speed with hydraulic control.

1° torque 7200 Nm (speed from 0 to 114 Rpm)2° torque 3600 Nm (speed from 0 to 228 Rpm)

3° torque 1800 Nm (speed from 0 to 456 Rpm)4° torque 900 Nm (speed from 0 to 916 Rpm)