Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
5
M E T T E C D E S K C A S E S
DES
K CA
SES
Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 11/98 e Copyright © 1998 OKW Gehäusesysteme KG Germany (http://www.okw.com)
6
M E T T E C D E S K C A S E S
HIGH STRENGTH, VARIABILITY; GOOD DESIGN
The METTEC CASE system is a new concept in metalenclosures for small desktop and portable electronicsequipment.
You can choose from two different versions to find the casewhich meets your requirements and applications perfectly:
• Version A with simple extruded rear panel.
• Version B with rear bezel and rear panel. The raised edgeshields the electronic parts and interfaces.
Optionally with handle bar for carrying and ergonomicsloping positions of the unit. With strong push buttonmechanism, giving 30 degrees indexing.
This robust case series is available in 4 different plan sizesand heights of 50, 85, 120 and 150 mm. You can choose from46 individual types.
Masked internal faces as well as additional contact pointsguarantee a high degree of shielding. For more informationsee page 39.
Guide ridges in the side extrusions allow mounting of PCBsin several positions.
METTEC DESK CASES offeryou a high degree of stability.Aluminium-diecastings areused for the bezel. An additional asset of thedesign is the increasedattenuation against electro-magnetic disturbances.
A P P L I C AT I O N S
The different sizes allow awide range of applications.As a desktop or portable unitfor interior applications, e.g.measuring and controltechnology, medical field andlaboratory technology,peripheral equipment forcomputers and networking,industrial control etc.
A C C E S S O R I E S
The large range ofaccessories is available toincrease the versatility ofthe case programme. See pages 16-17.
This illustration shows themasked contact surfaces ofeach component:
a Rear bezel
b Top panel(the same on base panel)
c Side extrusion
d Contact points in thebase and top panel
e Front bezel, masked area for contactwith the front panel (the same contact areais also on )
f Earth stud
g Rear panel
a
b
d
e f
g
S TA N D A R DC O L O U R S
Off-white, RAL 9002.Anthracite, RAL 7016.
M AT E R I A L
Bezel die-castings,aluminium. Extrusions, base and toppanel, and the side panels(on METTEC cases 150 mmhigh), in aluminium.
S TA N D A R DF I N I S H
All parts – exceptaccessories – painted withfine texture powderpolyester paint 75-105 µm.
C U S T O M I S I N G
See page 40.
N E W F E AT U R E !
All side extrusions nowinclude multiple guidegrooves for PCBs, chassisetc. See dimensional detailsof each model. (Somephotographs in thiscatalogue do not show thisfeature yet.)
c
a
DES
K CA
SES
➠
7
M E T T E C D E S K C A S E SOverall view
5 0 M M H I G HWidths Depths 160 130230 180250 250350 250
See pages 8-9.
8 5 M M H I G HWidths Depths160 130230 180250 250350 250
See pages 10-11.
8 5 M M H I G HWidths Depths230 193250 263350 263
See pages 10-11.
1 2 0 M M H I G HWidths Depths230 180250 250350 250
See pages 12-13.
1 2 0 M M H I G HWidths Depths230 193250 263350 263
See pages 12-13.
1 5 0 M M H I G HWidths Depths250 263350 263
See pages 14-15.
V E R S I O N A – with extruded rear panel V E R S I O N B – with rear bezel and rear panel
V E R S I O N A H – with extruded rear panel and handle bar V E R S I O N B H – with rear bezel, rear panel and handle bar
8 5 M M H I G HWidths Depths230 180
See pages 10-11.
8 5 M M H I G HWidths Depths230 193
See pages 10-11.
1 2 0 M M H I G HWidths Depths250 250
See pages 12-13.
1 2 0 M M H I G HWidths Depths250 263
See pages 12-13.
DES
K CA
SES
8
M E T T E C D E S K C A S E S 5 0 M M H I G H
METTEC 50 MM HIGHPart No. Version Outside dimensions in mm Inside dimensions in mm
anthracite off-white Height Width Depth a b c d e f g h j k l r s t u vA 50 160 130 130 108 118 104 158 – 111 116 130 158 118 110 113 122 84 102A 50 230 180 200 178 188 174 228 – 181 186 200 228 188 160 163 172 134 152A 50 250 250 220 198 208 194 248 – 201 206 220 248 208 230 233 242 204 222A 50 350 250 320 298 308 294 348 – 301 306 320 348 308 230 233 242 204 222M 57 35 007M 57 35 004
M 57 25 007M 57 25 004M 57 23 007M 57 23 004M 57 16 007M 57 16 004
The 50 mm height is thelowest size METTEC deskcase. Ideal for electronicsequipment with small frontpanel components i.e. LED’s,push buttons, membranekeyboards etc.
A S S E M B L Y
Case design assembled byfour M4 screws. The sideextrusions are located by arecess in the rear of thebezel and fixed with twoscrews. At the rear is anextruded rear panelmounted with two screws.The base and top panels arecaptured by horizontal slots.
All cases are suppliedassembled and include fournon-slip self-adhesive feet.Base panels are pre-punched for the case feet(separate article, seeaccessory page 17). An M4 earth stud is fitted tothe base panels.
S U P P L Y
Top panel
EMC contact point
Side extrusion (2x)
Base panel
Extruded rear panel
Front bezel
Non-slip feet, self-adhesiveCase foot (accessory, see page 17)
Front panel (accessory, see page 16)
For aluminium front panels, case feet with or without tilt leg and PCB mounting accessories see pages 16-17.
M4 earth stud
V E R S I O N A
With extruded rear panel.
DES
K CA
SES
9
M E T T E C D E S K C A S E S 5 0 M M H I G H
Side viewFront view
Rear view
Base view
DepthWidth
DES
K CA
SES
PCB
10
M E T T E C D E S K C A S E S 8 5 M M H I G H
METTEC 85 MM HIGHPart No. Version Outside dimensions in mm Inside dimensions in mm
anthracite off-white Height Width Depth a b c d e f g h j k l r s t u vA 85 160 130 130 125 118 104 158 121 111 116 130 158 118 110 113 122 84 102A 85 230 180 200 195 188 174 228 191 181 186 200 228 188 160 163 172 134 152AH 85 230 180 200 195 188 174 228 191 181 186 200 228 188 160 163 172 134 152B 85 230 193 200 195 188 174 228 191 181 186 200 – 188 153 163 181 134 –BH 85 230 193 200 195 188 174 228 191 181 186 200 – 188 153 163 181 134 –A 85 250 250 220 215 208 194 248 211 201 206 220 248 208 230 233 242 204 222B 85 250 263 220 215 208 194 248 211 201 206 220 – 208 223 233 251 204 –A 85 350 250 320 315 308 294 348 311 301 306 320 348 308 230 233 242 204 222B 85 350 263 320 315 308 294 348 311 301 306 320 – 308 223 233 251 204 –M 57 35 117M 57 35 114
M 57 35 107M 57 35 104M 57 25 117M 57 25 114M 57 25 107M 57 25 104M 57 23 137M 57 23 134M 57 23 117M 57 23 114M 57 23 127M 57 23 124M 57 23 107M 57 23 104M 57 16 107M 57 16 104
Ideal size for electronicsequipment with front panelLCD modules, LED’s, pushbuttons, membrane key-boards etc.
A S S E M B L Y
Case design assembled byeight M4 screws. The sideextrusions are located by arecess in the rear of thebezel and fixed with screws.At the rear of version A /AH isan extruded rear panel. Therear panel (Version B/BH) isassembled with four addi-tional screws. The base andtop panels are captured byhorizontal slots in the case. All cases are suppliedassembled and include fournon-slip self-adhesive feet.Base panels are pre-punchedfor the case feet (accessory,see page 17). An M4 earthstud is fitted to the basepanels.
V E R S I O N A
With extruded rear panel.
V E R S I O N A H
Version A with handle bar.
V E R S I O N B
With rear bezel and rear panel.
V E R S I O N B H
Version B with handle bar.
S U P P L Y
Top panel
Rear panel (Version B/BH)
Side extrusion (2x)
Front bezel
Rear bezel (Ver. B/BH)
Extruded rear panel (Version A/AH)
Non-slip foot, self-adhesive (4x)
Front panel (accessory, see page 16)
Case foot (accessory, see page 17)
For aluminium front panels, case feet with or without tilt legs and PCB mounting accessories see pages 16-17.
EMC contact point
Base panel
M4 earth stud
DES
K CA
SES
11
M E T T E C D E S K C A S E S 8 5 M M H I G H
Rear view version A
Front view
Base view version A
Depth
Width
Side view version A Side view version B
Rear view version B
Depth
DES
K CA
SES
PCB
12
M E T T E C D E S K C A S E S 1 2 0 M M H I G H
METTEC 120 MM HIGHPart No. Version Outside dimensions in mm Inside dimensions in mm
anthracite off-white Height Width Depth a b c d e f g h j k l r s t u vA 120 230 180 200 195 188 174 228 191 181 186 200 228 188 160 163 172 134 152B 120 230 193 200 195 188 174 228 191 181 186 200 – 188 153 163 181 134 –A 120 250 250 220 215 208 194 248 211 201 206 220 248 208 230 233 242 204 222AH 120 250 250 220 215 208 194 248 211 201 206 220 248 208 230 233 242 204 222B 120 250 263 220 215 208 194 248 211 201 206 220 – 208 223 233 251 204 –BH 120 250 263 220 215 208 194 248 211 201 206 220 – 208 223 233 251 204 –A 120 350 250 320 315 308 294 348 311 301 306 320 348 308 230 233 242 204 222B 120 350 263 320 315 308 294 348 311 301 306 320 – 308 223 233 251 204 –M 57 35 217M 57 35 214
M 57 35 207M 57 35 204M 57 25 237M 57 25 234M 57 25 217M 57 25 214M 57 25 227M 57 25 224M 57 25 207M 57 25 204M 57 23 217M 57 23 214M 57 23 207M 57 23 204
Comfortable case size forelectronics equipment with large front panel LCDmodules, LED’s, pushbuttons, membranekeyboards etc.
A S S E M B L Y
Case design assembled byeight M4 screws. The sideextrusions are located by arecess in the rear of thebezel and fixed with screws.At the rear of version A /AH isan extruded rear panel. Therear panel (Version B/BH) isassembled with fouradditional screws. The baseand top panels are capturedby horizontal slots in thecase. All cases are suppliedassembled and include fournon-slip self-adhesive feet.Base panels are pre-punchedfor the case feet (separatearticle, accessory see page 17). An M4 earth stud isfitted to the base panels.
V E R S I O N A
With extruded rear panel.
V E R S I O N A H
Version A with handle bar.
V E R S I O N B
With rear bezel and rear panel.
V E R S I O N B H
Version B with handle bar.
S U P P L Y
For aluminium front panels, case feet with or without tilt legs and PCB mounting accessories see pages 16-17.
DES
K CA
SES
Top panel
Rear panel (Version B/BH)
Side extrusion (2x)
Front bezel
Rear bezel (Ver. B/BH)
Extruded rear panel (Version A/AH)
Non-slip foot, self-adhesive (4x)
Front panel (accessory, see page 16)
Case foot (accessory, see page 17)
EMC contact point
Base panel
M4 earth stud
13
M E T T E C D E S K C A S E S 1 2 0 M M H I G H
Rear view version A
Front view
Base view
Depth
Width
Side view version A Side view version B
Rear view version B
Depth
DES
K CA
SES
PCB
14
M E T T E C D E S K C A S E S 1 5 0 M M H I G H
METTEC 150 MM HIGHPart No. Version Outside dimensions in mm Inside dimensions in mm
anthracite off-white Height Width Depth a b c d e f g h j k l r s t u vB 150 250 263 220 215 208 194 248 211 201 206 220 – 208 223 233 251 204 –B 150 350 263 320 315 308 294 348 311 301 306 320 – 308 223 233 251 204 –M 57 35 317M 57 35 314
M 57 25 317M 57 25 314
Large size METTEC DESKCASES for electronicsequipment with multipleinternal components andlarge front panel LCDmodules, LED’s, push buttons, membranekeyboards etc.
A S S E M B L Y
Case design assembled byeight M4 screws. The sideextrusions are located by arecess in the rear of thebezel and fixed with screws.The rear panel is assembledwith four additional screws.Side panels are fitted tovertical slots in each pair ofside extrusions, and the topand base panels are capturedby horizontal slots in each ofthe case components.
All cases are suppliedassembled and include fournon-slip self-adhesive feet.Base panels are pre-punchedfor the case feet (separatearticle, see accessory page 17). An M4 earth stud isfitted to the base panels.
S U P P L Y
Top panel
Base panel
Side extrusion (4x)
Front bezel
Rear bezel
Non-slip foot, self-adhesive (4x)
Front panel (accessory, see page 16)
Case foot (accessory, see page 17)
For aluminium front panels, case feet with or without tilt legs and PCB mounting accessories see pages 16-17.
Rear panel
EMC contact point
Side panel (2x)
M4 earth stud
DES
K CA
SES
V E R S I O N B
With rear bezel and rear panel.
15
M E T T E C D E S K C A S E S 1 5 0 M M H I G H
Side viewFront view
Base view
DepthWidth
Rear view
DES
K CA
SES
PCB
16
A C C E S S O R I E SF O R M E T T E C D E S K C A S E S
F R O N T P A N E L K I T
These panels fit directly tothe front bezels and arerecessed for convenientmounting of membranekeyboards, display modules,control switches etc.
Two trims are supplied witheach kit. These clip on to thefront panels and hide thefixing screws for a cleanfrontal appearance. They alsogive a location area formembrane keyboards.
Material:Front panel anodisedaluminium, 2 mm.Trims in ABS, light grey RAL 7035.
Supply:1 front panel
(four M3 x 6 mm pozi screwssupplied with each case formounting these panels)
2 trims
S E P A R AT E T R I M S
Two plastic trims aresupplied with each frontpanel kit, however, forcustom front panels thetrims can be ordered asseparate items.
Supply:1 trim
FRONT PANEL KITPart No. For case ... Panel dimensions in mm
Height Width A B C D E F G50 160 129.5 118 33.6 22.3 5.75 3.8 8.250 230 199.5 188 33.6 22.3 5.75 3.8 8.250 250 219.5 208 33.6 22.3 5.75 3.8 8.250 350 319.5 308 33.6 22.3 5.75 3.8 8.285 160 129.5 118 65.1 30.8 5 3.8 15.285 230 199.5 188 65.1 30.8 5 3.8 15.285 250 219.5 208 65.1 30.8 5 3.8 15.285 350 319.5 308 65.1 30.8 5 3.8 15.2
120 230 199.5 188 100.1 65.8 5 – –120 250 219.5 208 100.1 65.8 5 – –120 350 319.5 308 100.1 65.8 5 – –150 250 219.5 208 130.1 95.8 5 – –150 350 319.5 308 130.1 95.8 5 – –
SEPARATE TRIMS (for customised front panels)For case height Supply
50 mm 1 piece (2 pieces required)85 mm 1 piece (2 pieces required)
120 mm 1 piece (2 pieces required)150 mm 1 piece (2 pieces required)M 57 00 024
M 57 00 022M 57 00 021M 57 00 020
M 57 00 621M 57 00 616M 57 00 620M 57 00 615M 57 00 610M 57 00 618M 57 00 613M 57 00 608M 57 00 602M 57 00 617M 57 00 612M 57 00 607M 57 00 601
for case height 50 / 85 mm
for case height 120 / 150 mm
DES
K CA
SES
17
A C C E S S O R I E SF O R M E T T E C D E S K C A S E S
C A S E F E E T
These optional case feetreplace the standard non-slipfeet provided with each case.They are mounted to pre-punched holes in the basepanels (case version A /AHand B/BH).
Available in two versions:With or without tilt legs.
Standard colours:Off-white, RAL 9002.Black, RAL 9005.(rubber insert pebble grey)
Material:Foot mouldings and tilt feetABS (UL 94 HB).
V E R S I O N I
4 foot mouldings.4 non-slip rubber inserts.4 self tapping screws.
V E R S I O N I I
As above but also including 2 tilt legs.
CASE FEETVersion Colour Part No.I off-whiteII off-whiteI blackII black A 92 57 209
A 92 57 109A 92 57 207A 92 57 107
Self tapping screw
Case panel
Location pillars
Foot
Rubber insert
Tilt leg
P C B C L I P
Simple accessory formounting PCBs and othercomponents at any positionin the case. Self adhesivepad for fast installation.
Suitable for PCBs 1.6 mmthick with 4 mm dia. hole.
Material: Polyamide.
Supply: 1 PCB clip.
Part No.
M 57 00 200
1710
ø 3 3
16
16 13
344,5
36
127°
DES
K CA
SES
19
M E T T E C E U R O C A R D C A S E S
EURO
CARD
CA
SES
20
M E T T E C E U R O C A R D C A S E S
STYLISH, STRONG, EUROCARD MOUNTING,EMC SHIELDING
METTEC EUROCARD CASES are robust and attractivehousings for Eurocard based systems. Up to five Eurocardscan be fitted into each case. The attractive front and rearbezel design will enhance the look of today’s electronics.
There is a choice of two versions:
• For single Eurocards: 100 x 160 mm or 100 x 220 mm(see pages 22 to 23)
• For double Eurocards: 233.4 x 160 mm or 233.4 x 220 mm(see pages 24 to 25)
These cases accept Eurocards which conform to theinternational standard DIN 41612.
Eight cases in the range all 50 mm high. Removable rearpanel included. Supplied ready assembled.
Masked internal connecting faces along with contact pointson the top and base panels ensure a high degree of EMCshielding. For more information see page 39.
METTEC EUROCARD CASESare designed for applicationsusing standard Eurocard sizePCBs.
S TA N D A R DC O L O U R S
Off-white, RAL 9002.Anthracite, RAL 7016.
M AT E R I A L
Bezel die-castings,aluminium. Extrusions, base, top andrear panels, in aluminium.
S TA N D A R DF I N I S H
All parts – exceptaccessories – painted withfine texture powderpolyester paint 75-105 µm.
C U S T O M I S I N G
Cases can be easilycustomised to suit yourapplication i.e. differentdepths, machining of holes,different colours, silk screen printing etc. For more information see page 40.
A P P L I C AT I O N S
The METTEC EUROCARDCASES are suitable for manydifferent types of electronicsystems i.e. test andmeasurement, computerperipherals, medicalinstruments, industrialcontrol devices etc.
Front panels:To protect operatingelements and membranekeyboards, the front panel isrecessed.
V E R S I O N B
All Eurocard cases areversion B with rear bezel and flat rear panel.
A C C E S S O R I E S
Mounting kit:For fitting a Eurocard to thefront panel.
EURO
CARD
CA
SES
21
M E T T E C E U R O C A R D C A S E S
For mounting singleEurocard size PCBs:
• 100 x 160 mm• 100 x 220 mm
See pages 22-23.
S I N G L E E U R O C A R D C A S E S
For mounting doubleEurocard size PCBs:
• 233.4 x 160 mm• 233.4 x 220 mm
See pages 24-25.
D O U B L E E U R O C A R D C A S E S
Internal faces are masked tobe free of paint. Thisensures interconnectionbetween components forhigh EMC performance.
For more information seepage 39.
E M C S H I E L D I N G
EURO
CARD
CA
SES
➠ ➠
➠➠
➠
METTEC SINGLE EUROCARD CASESPart No. For Outside dim. in mm Inside dim. in mm
anthracite off-white Eurocard… Height Width Depth a b c100 x 160 mm 50 152.5 220 180 206.5 190100 x 220 mm 50 152.5 280 240 266.5 250
ACCESSORIESArticle Application / SupplyFront panel kit 2 mm anodised aluminium; 1 front panel, 2 ABS trims RAL 7035 to hide the fixing screwsEurocard mounting kit for mounting a front panel to the Eurocard, 2 mounting blocks and required screwsM 57 00 017
M 57 00 622
M 57 15 057M 57 15 054M 57 14 057M 57 14 054
22
M E T T E C S I N G L E E U R O C A R D C A S E S
Designed to accept singleDIN 41612 Eurocards 100 x 160 and 100 x 220 mm in five horizontal positions.
A S S E M B L Y
Very robust construction inaluminium assembled byfour M4 screws. The caseextrusion also incorporatesenclosed vertical guidepositions for hiddencomponents and devices.For high shieldingattenuation all internal partsare masked and interlockwith each other. The frontpanel mounting face on thebezel is also masked forelectrical contact.
All cases are suppliedassembled and include thefixings for the accessoryfront panels and four non-slip self-adhesive feet.
S U P P L Y
Rear panel
Case extrusion(box section)
Rear bezel
Non-slip foot, self-adhesive (4x)
Front panel kit (accessory) –4 screws supplied with case
Front bezel
A C C E S S O R I E S
FRONT PANEL KIT:
Supplied with two trimswhich hide the fixing screwsand allow easy assembly ofmembrane keyboards.
EUROCARD MOUNTING KIT:
For mounting a Eurocard tothe front panel. Mountingdetails see page 26.
EURO
CARD
CA
SES
23
M E T T E C S I N G L EE U R O C A R D C A S E S
EURO
CARD
CA
SES
Side View
Front View
Rear View
Base View
Depth
Front panel
PCB
PCB
METTEC DOUBLE EUROCARD CASESPart No. For Outside dim. in mm Inside dim. in mm
anthracite off-white Eurocard… Height Width Depth a b c233.4 x 160 mm 50 286 220 180 206.5 190233.4 x 220 mm 50 286 280 240 266.5 250
ACCESSORIESArticle Application / SupplyFront panel kit 2 mm anodised aluminium; 1 front panel, 2 ABS trims RAL 7035 to hide the fixing screwsEurocard mounting kit for mounting a front panel to the Eurocard, 2 mounting blocks and required screwsM 57 00 017
M 57 00 623
M 57 28 057M 57 28 054M 57 27 057M 57 27 054
24
M E T T E C D O U B L E E U R O C A R D C A S E S
Designed to accept doubleDIN 41612 Eurocards 233.4 x 160 mm and 233.4 x 220 mm in fivehorizontal positions.
A S S E M B L Y
Very robust construction inaluminium assembled byfour M4 screws. The sideextrusions also incorporateenclosed vertical guidepositions for hiddencomponents and devices.For high shieldingattenuation all internal partsare masked and interlockwith each other. The frontpanel mounting face on thebezel is also masked forelectrical contact.
All cases are suppliedassembled and include thefixings for the accessoryfront panels and four non-slip self-adhesive feet.
S U P P L Y
Rear panel
Side extrusion (2x)
Rear bezel
Non-slip foot, self-adhesive (4x)
Front panel kit (accessory) –4 screws supplied with case Front bezel
A C C E S S O R I E S
FRONT PANEL KIT:
Supplied with two trimswhich hide the fixing screwsand allow easy assembly ofmembrane keyboards.
EUROCARD MOUNTING KIT:
For mounting a Eurocard tothe front panel. Mountingdetails see page 26.
EURO
CARD
CA
SES
Base panel
Top panel
25
M E T T E C D O U B L EE U R O C A R D C A S E S
EURO
CARD
CA
SES
Side View
Front View
Rear View
Base View
Depth
Front panel
26
A C C E S S O R I E S F O R E U R O C A R D C A S E S
E U R O C A R DM O U N T I N G K I T
For applications where thePCB must be fitted to thefront panel e.g. plug-in units,this kit provides thenecessary parts. The frontpanel must be drilled as perthese drawings so that themounting block is alignedwith the selected guide rail in the case.
Supply:
2 mounting blocks.4 M2.5 fixings.Drilling instuctions.
S I N G L E E U R O C A R D C A S EDrill two holes in front panel ø 2.8 CSK ø 5.5 x 90°
D O U B L E E U R O C A R D C A S EDrill two holes in front panel ø 2.8 CSK ø 5.5 x 90°
Part No.
M 57 00 017
EURO
CARD
CA
SES
Mounting block position
Mounting block position
PCB positions
PCB positions
PCB positions
PCB positions
➠