FLOW A 321 SS HOSE & 304 SS BRAID CARBON STEEL SDF VANE CARBON STEEL PLATE FLANGE 150# DRILLING FLAT FACE 11/22/2013 MAX PERMANENT OFFSET FROM CENTERLINE - 3/8" MAX INTERMITTENT OFFSET FROM CENTERLINE - 1/8" SHORT RADIUS DESIGNED TO BE INSTALLED IMMEDIATELY UP-STREAM OF A SHORT RADIUS 90 ELBOW. *For safe working pressure above 70 F, multiply pressure shown at 70 F by correction factor of required temp. Suction Diffuser Flex with 150# Plate Flanges for Connecting to S.R. Elbow SDFS NONE LEAD FREE The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight. Material complies with state codes and standards, where applicable, requiring reduced lead content. 11/22/2013 JC Qty Part Number Size (in) A (in) PSI @ 70 F Project Info SDFS0200 2 9 455 SDFS0250 2-1/2 9 345 SDFS0300 3 9 289 SDFS0400 4 9 300 SDFS0500 5 11 220 SDFS0600 6 11 200 SDFS0800 8 12 190 SDFS1000 10 13 150 SDFS1200 12 14 125 SDFS1400 14 14 105 Temperature ( F) Factor 70 1.00 200 0.92 300 0.86 400 0.82 500 0.77 600 0.73 REV. DATE DRAWN BY: APPROVED: DATE: DATE: SCALE: DRAWING NUMBER: CUSTOMER:__________________________________ PROJECT:____________________________________ ENGINEER:___________________________________ 2323 W. HUBBARD ST. CHICAGO, IL 60612 TEL: 312-738-3800 FAX: 312-738-0415 WWW.METRAFLEX.COM DKISH

Metraflex-Suction-Diffuser-Flex-SDFS24523452345234523544647547686587457643634563456345743657567

Download PDF Report

Upload
rseresfer34533373563
View
3
Download
2

Embed Size (px)

Citation preview

Page 1: Metraflex-Suction-Diffuser-Flex-SDFS24523452345234523544647547686587457643634563456345743657567

FLOW

321 SS HOSE &304 SS BRAID

CARBON STEELSDF VANE

CARBON STEEL PLATE FLANGE150# DRILLINGFLAT FACE

11/22/2013

MAX PERMANENT OFFSET FROM CENTERLINE - 3/8"MAX INTERMITTENT OFFSET FROM CENTERLINE - 1/8"

SHORT RADIUSDESIGNED TO BE INSTALLEDIMMEDIATELY UP-STREAM OF ASHORT RADIUS 90 ELBOW.

*For safe working pressure above 70 F,multiply pressure shown at 70 F bycorrection factor of required temp.

Suction Diffuser Flex with 150# PlateFlanges for Connecting to S.R. Elbow

SDFSNONE

LEAD FREEThe wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight. Material complies with state codes and standards, where applicable, requiring reduced lead content.

11/22/2013JC

Qty Part Number Size (in) A (in) PSI @ 70 F Project InfoSDFS0200 2 9 455SDFS0250 2-1/2 9 345SDFS0300 3 9 289SDFS0400 4 9 300SDFS0500 5 11 220SDFS0600 6 11 200SDFS0800 8 12 190SDFS1000 10 13 150SDFS1200 12 14 125SDFS1400 14 14 105

Temperature ( F) Factor70 1.00200 0.92300 0.86400 0.82500 0.77600 0.73

REV. DATE

DRAWN BY:APPROVED: DATE:

DATE:

SCALE: DRAWING NUMBER:

CUSTOMER:__________________________________

PROJECT:____________________________________

ENGINEER:___________________________________

2323 W. HUBBARD ST.CHICAGO, IL 60612TEL: 312-738-3800FAX: 312-738-0415WWW.METRAFLEX.COM

DKISH