Upload
hoangkiet
View
213
Download
0
Embed Size (px)
Citation preview
Perforation Options (Actual 1:1 scale shown)
Microperforated(M2)
Extra Microperforated
(M3)
Additional sizes, colors, and perforations available as custom options. For more information, visit our web site at armstong.com/metalworks or call 1 877 ARMSTRONG and select options 1-1-4 to work with the Architectural Specialties Project Management Team.
Unperforated(M1)
TechLineSM 877 ARMSTRONG armstrong.com/metalworks49
Tegularsmooth texture
METALWORKS™
MetalWorks Flush Tegular Microperforated in Silver Grey
Detail
MetalWorks Tegular Microperforated
MetalWorks TegularExtra Microperforated
Effects Wood Looks Tegular
Extra Microperforated
Color Selection Due to printing limitations, shade may vary from actual product.
White (WH)
Silver Grey (SG)
Gun Metal Grey (MY)
Effects Maple (FXMP)
Effects Cherry (FXCH)
Effects Walnut (FXWN)
Panels are available in Custom RAL colors upon request. Effects colors are only available for unperforated and extra microperforated panels.
Effects Dark Cherry
(FXDC)
Inset: MetalWorks Tegular Extra Microperforated in Effects Wood Looks Cherry
K e y S e l e c t i o n A t t r i b u t e s• 100% upward access• Installs on existing or new 15/16" or 9/16" Exposed Tee grid systems• Durable – Washable, Scrubbable, Soil-resistant• Available in 4 standard Effects™ Wood Looks finishes with matching
Effects trim• Good NRC with acoustical fleece (perforated panels)• BioAcoustic™ infill panels can enhance acoustics and contribute to
LEED® Credits• Cutouts for recessed lights and sprinklers available• Standard edge caps for cut panels• Additional sizes, colors, and perforations available as premium and
custom options
Suspension Systems
15/16" 9/16"
Prelude® XL Interlude® Silhouette® Bolt-Slot
Sonata® Suprafine® XL® Trimlok® Screw-Slot
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW TegularSilhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Edge Item Durable Profile Number u Dimensions
METALWORKS Flush Tegular15/16" Flush Tegular 6461_ _ _ _ uu 2' x 2' Wash Scrub Impact Soil l l l l
METALWORKS 5/16" Square Tegular 15/16" Square Tegular 6462_ _ _ _ 2' x 2' l l l l
9/16" Square Tegular 6464_ _ _ _ _ _uuu 2' x 2' l l l l
METALWORKS 5/8" Square Tegular15/16" Square Tegular 6463_ _ _ _uu 2' x 2' l l l l
9/16" Square Tegular 6465_ _ _ _uu 2' x 2'
l l l l
P h y s i c a l D a t a
V i s u a l S e l e c t i o n
Tegularsmooth texture
METALWORKS™
MaterialElectrogalvanized Steel – thickness .021" Surface FinishFactory-applied powder-coated finish (post-coated). Premium and Custom RAL colors also available. Refer to CS-3957 for a sampling of Custom RAL colors. Contact Architectural Specialties for custom color matching requests at 1 877 ARMSTRONG; select options 1-1-4.Fire PerformanceFactory Mutual Approvals Specification tested per ASTM E84 and CAN/ULC S102. Flame Spread Index 25 or less. Smoke Developed Index 50 or less.
ASTM E1264 ClassificationFire Class – Class AUnperforated – Type XX, Pattern G Perforated – Type XX, Pattern CInstallation ConsiderationFor Tegular panels, a Faceted Hold Down Clip must be used, which will limit accessibility. If accessibility is required in a faceted application, use Vector® panels.For information about faceted applications with square Tegular panels in 15/16" grid, refer to CS-3701 and installation instructions on our web site at armstrong.com/metalworks.
WarrantyRefer to warranty details in the back of this catalog.Weight; Square Feet/Carton6461M2 – 0.75 lbs/SF; 64 SF/Ctn6461M1 – 0.80 lbs/SF; 64 SF/Ctn6462M2 – 0.86 lbs/SF; 64 SF/Ctn6462M1, 6463M2, 6465M2, 6462M3 – 0.89 lbs/SF; 64 SF/Ctn6464M2, 6463M1, 6465M1, 6464M3 – 0.92 lbs/SF; 64 SF/Ctn6464M1 – 0.97 lbs/SF; 64 SF/Ctn
Item Number Description Dimensions Pcs/CtnFX4SPLICE Splice Plate with Set Screws N/A 10
FXSPTHDC Effects Hold Down Clip for N/A 10 Cut Panel Installations
6096_ _u 15/16” Edge Cap for Cut Tegular Panels*** Nominal 2’ 50
6099_ _u 9/16” Edge Cap for Cut Tegular Panels*** Nominal 2’ 50
A c c e s s o r i e s
u When specifying or ordering, include the appropriate 2 or 4 letter color suffix (e.g., 5342 F X C H, 6096 W H). *** Edge Caps only available for 5/16" square Tegular items (6462, 6464). Note: For information about Effects trim and other accessories, see pages 93-94 or visit armstrong.com/metalworks
Perforation NRC CAC
M1 0.10 36M2 0.65 38* 0.90** • •M3 0.65 40 0.70** • • * With optional field-cut #747 mineral fiber backing (cannot be used with
fiberglass infill #8200100). ** NRC 0.90 (microperforated) or NRC 0.70 (extra microperforated) with
optional fiberglass infill #8200100 (cannot be used with #747 mineral fiber backing). NRC 0.85 (microperforated) or NRC 0.70 (extra microper-forated) with optional BioAcoustic™ infill #5479. For more information on acoustical infill panels, see page 71.
PanelDimension/Type:
15/16'' Flush Tegular
Perforation:M2
MicroperforatedRg 6006
Finish:Effects Cherry
6461 M2 FXCHEXAMPLE:
u When specifying or ordering, include the appropriate perforation and letter color suffixes with the item number (e.g., 6462 M 1 W H ). Light reflectance is for white only (0.77 for unperforated and extra microperforated, 0.61 for microperforated).
uu “S” Service item with 1,000 SF minimum order quantity and extended lead time. uuu Available in Effects Wood Looks finishes.
TechLineSM 877 ARMSTRONG 50
LEED® Credits Acoustics Low Emitting or CHPS
4 4
LEED for Schools
RecycledContent:
Energy Waste Recycled Local Renewable Daylight Mgmt Content Materials Materials & Views
4 4 4 Location Dependent
25% armstrong.com/greengenie
Acous t i c a l Pe r f o rmance Dots represent highest level of acoustical performance
Colors and PerforationsWhite (WH)Silver Grey (SG)Gun Metal Grey (MY)
Effects™ Maple (FXMP)Effects Cherry (FXCH) Effects Dark Cherry (FXDC)Effects Walnut (FXWN)
Unperforated (M1)Microperforated (M2)Extra Micorperforated (M3)
ME
TA
LW
OR
KS
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Silhouette with MW Tegular Interlude with MW Tegular Trimlok with MW Tegular
Sonata with MW Tegular 9/16" Suprafine with MW Tegular 15/16" Prelude with MW Tegular
Prelude and Suprafine are available in many standard colors. All other grid is available in standard White only. Other colors available as special order.
K e y S e l e c t i o n A t t r i b u t e s
• Exclusive Vector-edge profile ceiling installs on new or existing 15/16" exposed tee grid resulting in a thin 1/4" reveal
• Cutouts for recessed lights and sprinklers available• Available in 4 standard Effects™ Wood Looks finishes with matching
Effects trim• Durable – Washable, Scrubbable, Impact-resistant, Soil-resistant• Exterior system available, tested to meet wind uplift Classes 30, 60,
and 90• Good NRC with acoustical fleece (perforated panels)• BioAcoustic™ infill panels can enhance acoustics and contribute to
LEED® Credits• Installs with minimal plenum clearance• 100% downward accessible, without tools• Standard edge caps for cut panels• Plenum access per panel without the need of special tools• Less expensive than stucco for exteriors • Additional sizes, colors, and perforations available as premium and
custom options
MetalWorks Vector Faceted Extra Microperforated in Effects Wood Looks Cherry MetalWorks Vector Unperforated in White with Prelude® XL® 15/16" Exposed Tee grid for Exterior Applications
Perforation Options (Actual 1:1 scale shown)
Microperforated(M2)
Extra Microperforated
(M3)
Additional sizes, colors, and perforations available as custom options. For more information, visit our web site at armstong.com/metalworks or call 1 877 ARMSTRONG and select options 1-1-4 to work with the Architectural Specialties Project Management Team.
For more information about faceted applications, refer to CS-3701 and installation instructions on our web site at armstrong.com/metalworks, search keyword (example: faceted).
Unperforated(M1)
TechLineSM 877 ARMSTRONG armstrong.com/metalworks51
METALWORKS™
Vector® & Vector Exteriorsmooth texture
Detail
MetalWorks Vector Microperforated
MetalWorks VectorExtra Microperforated
MetalWorks Vector Unperforated with
Prelude 15/16" Exposed Tee grid
Color Selection Due to printing limitations, shade may vary from actual product.
White (WH)
Silver Grey (SG)
Gun Metal Grey (MY)
Maple (FXMP)
Cherry (FXCH)
Walnut (FXWN)
Dark Cherry (FXDC)
White Exterior (WH2)
Silver Grey Exterior (SG2)
Gun Metal Grey Exterior
(MY2)
Effects Maple Exterior (FXMP)
Effects Cherry Exterior (FXCH)
Effects Walnut Exterior (FXWN)
Effects Dark Cherry Exterior
(FXDC)
Panels are also available in Custom RAL colors upon request. Note: Effects colors are only available for unperforated and extra microperforated panels.
u When specifying or ordering, include the appropriate letter color suffix with the item number (e.g., WH). Note: For information about Effects trim and other accessories, see pages 93-94 or
visit armstrong.com/metalworks
Item Numberu Description Dimensions Pcs/carton
FXSPTHDC Effects Hold Down Clip N/A 10 for Cut Panel Installations
84008_ _ Single-Slot Air Diffuser 2' x 2' 1 (not available in Effects colors)
6098_ _ Edge Cap for Cut Vector Nominal 2' length 50 Panels (not available in Effects colors)
A c c e s s o r i e s
Acoustics NRC CAC DurableEdge Item Fire LightProfile Number Dimensions Rating Reflect
METALWORKS Vector Unperforated1/4" Reveal with 6466M1_ _ _ _ _uu 2' x 2' 0.10 36 Class A 0.77 Wash Scrub Impact Soil 15/16" Vector l l l l
METALWORKS Vector Microperforated (with acoustical fleece) 1/4" Reveal with 6466M2_ _ _ 2' x 2' 0.70 31* Class A 0.61 15/16" Vector 0.90** l l l l l
METALWORKS Vector Extra Microperforated (with acoustical fleece)1/4" Reveal with 6466M3_ _ _ _ _uu 2' x 2' 0.65 33* Class A 0.77 15/16" Vector 0.70** l l l l l
P h y s i c a l D a t a
V i s u a l S e l e c t i o n P e r f o r m a n c e S e l e c t i o n Dots represent highest level of performance.
MaterialElectrogalvanized Steel – .021" thickness
Surface FinishFactory-applied powder-coated finish (post-coated). Exterior: Factory-applied powder-coated finish (post-coated on both sides). Effects finish on face onlyPremium and Custom RAL colors also available. Refer to CS-3957 for a sampling of Custom RAL colors. Contact Armstrong Architectural Specialties for custom color matching requests at 1 877 ARMSTRONG; select options 1-1-4.
Fire PerformanceFactory Mutual Approvals Specification tested per ASTM E84 and CAN/ULC S102. Flame Spread Index 25 or less. Smoke Developed Index 50 or less.
ASTM E1264 ClassificationFire Class – Class AUnperforated – Type XX, Pattern G Perforated – Type XX, Pattern C
Wind Uplift PerformanceMetalWorks Vector for exterior applications has been tested to meet wind uplift Classes 30, 60, and 90. Visit armstrong.com/metalworks or contact TechLine at 1 877 ARMSTRONG for installation instructions and test documentation.
WarrantyRefer to warranty details in the back of this catalog.
Weight; Square Feet/Carton6466M1, 6466M3 – 1.15 lbs/SF; 40 SF/ctn6466M2 – 1.10 lbs/SF; 40 SF/ctn
When specifying or ordering, include the appropriate letter color suffix with the item number (e.g., 6466 M 1 W H, 6466 M 3 F X C H, or 6466 M 1 F X M P 2). Light reflectance is for white only.
uu Available in Effects Wood Looks finishes. * With optional field-cut #747 mineral fiber backing (cannot be used with fiberglass infill #8200100 ** NRC 0.90 (microperforated); NRC 0.70 (extra microperforated) with optional fiberglass infill #8200100 (cannot be used with #747 mineral fiber backing);
NRC 0.85 (microperforated), or NRC 0.70 (extra microperforated) with optional BioAcoustic™ infill #5479. For more information on acoustical infill panels, see page 71.
Vector® & Vector Exteriorsmooth texture
METALWORKS™
Colors and Perforations
TechLineSM 877 ARMSTRONG 52
LEED® Credits Acoustics Low Emitting or CHPS
4 4
LEED for Schools
RecycledContent:
Energy Waste Recycled Local Renewable Daylight Mgmt Content Materials Materials & Views
4 4 4 Location Dependent
25% armstrong.com/greengenie
15/16" Prelude® XL®
15/16" Prelude XL for Exterior Applications* 12' Main Beam: 7301G90 2' Cross Tee: XL7321G90 10' Wall Molding: HD7801G90
* Available in Silver Grey (SG) and Gun Metal Grey (MY) colors as special order.
S u s p e n s i o n S y s t e m s
ME
TA
LW
OR
KS
White (WH)Silver Grey (SG)Gun Metal Grey (MY)
Effects™ Maple (FXMP)Effects Cherry (FXCH) Effects Dark Cherry (FXDC)Effects Walnut (FXWN)
Effects Cherry Exterior (FXCH2) Effects Dark Cherry Exterior (FXDC2)Effects Walnut Exterior (FXWN2)
White Exterior (WH2)Silver Grey Exterior (SG2)Gun Metal Grey Exterior (MY2)Effects Maple Exterior (FXMP2)
Unperforated (M1)Microperforated (M2)Extra Micorperforated (M3)
smooth texture
METALWORKS™ Linear & Linear Exterior
MetalWorks Linear Faceted in Effects Wood Looks Cherry MetalWorks Linear for Exterior Applications in White
Due to the non-standard suspension system of this product, call 1 877 ARMSTRONG and select options 1-1-4 to order this product through Architectural Specialities.
* Premium option
TechLineSM 877 ARMSTRONG armstrong.com/metalworks55
K e y S e l e c t i o n A t t r i b u t e s• Nominal 4", 8", and 12" wide panels, including
nominal 1" reveal• Acoustical options with microperforated panels • Available in 4 Effects™ Wood Looks
finishes, utilizing innovative FX technology• Curved systems also available • Fast and easy installation• Available for exterior applications, tested to meet wind
uplift Classes 30, 60, and 90
Perforation Options (Actual 1:1 scale shown)
MicroperforatedUnperforated
Color Selection Due to printing limitations, shade may vary from actual product.
White (WH)
Silver Grey (SG)*
Gun Metal Grey (MY)
Maple (FXMP)
Cherry (FXCH)
Walnut (FXWN)
Dark Cherry (FXDC)
White Exterior (WH2)
Silver Grey Exterior (SG2)*
Gun Metal Grey Exterior
(MY2)*
Effects Maple Exterior
(FXMP2)*
Effects Cherry Exterior
(FXCH2)*
Effects Walnut Exterior
(FXWN2)*
Effects Dark Cherry Exterior
(FXDC2)*
PanelSplice Plate
Optional Contrasts Filler Stripattaches on to panel flangebefore installing panels progressively
4" Panel System Detail
A c c e s s o r i e s
TechLineSM 877 ARMSTRONG 56
Acoustics NRC Durable Item Dimensions Fire Light Number u Description Nominal L x W x H Rating Reflect
5490_ _ _ _ _ 4" Unperforated 96" x 4" x 5/8" N/A Class A 0.77 Wash Scrub Impact Soil l l l l
5491_ _ _ _ _ 8" Unperforated 96" x 8" x 5/8" N/A Class A 0.77 l l l l
5570_ _ _ _ _† 12" Unperforated 96" x 12" x 5/8" N/A Class A 0.77 l l l l
5492_ _ _ _ _ 4" Microperforated 96" x 4" x 5/8" 0.70 Class A 0.61 with plain border and 0.85* l l l l acoustical fleece l
5493_ _ _ _ _ 8" Microperforated 96" x 8" x 5/8" 0.70 Class A 0.61 with plain border and 0.85* l l l l acoustical fleece l
5571_ _ _ _ _† 12" Microperforated 96" x 12" x 5/8" 0.70 Class A 0.61 with plain border and 0.85* l l l l acoustical fleece l
u When specifying or ordering, include the appropriate 2 or 4 letter color suffix (5490WH, 5492FXCH, 5491FXDC2). † 12" panels are “S” Service items with minimum order quantities and extended lead times. * NRC 0.85 with optional fiberglass infill. For acoustical infill panel information, see page 71. Note: Silver Grey (SG), Gun Metal Grey (MY) and Effects colors are available as “S” Service items with minimum order quantities and extended lead times.
u When specifying or ordering, include the appropriate 2 or 4-letter color suffix (e.g., 5581FXCH). † “S” Service item with minimum order quantities and extended lead times. ** 12" Panel End Cap is for cut panels only. 12" linear panels come with an upturned end.
P h y s i c a l D a t a
V i s u a l S e l e c t i o n P e r f o r m a n c e S e l e c t i o n Dots represent highest level of performance.
smooth texture
METALWORKS™ Linear & Linear Exterior
MaterialElectrogalvanized Steel – thickness 0.028"
Surface FinishAvailable in White, Silver Grey, Gun Metal Grey, andEffects Wood Looks powder-coated, post-productionfinishes. Panels are finished on both sides for exterior applications. Custom RAL colors also available. Refer to CS-3957 for a sampling of RAL colors. Contact Armstrong Architectural Specialties for custom color matching requests at 1 877 ARMSTRONG; select options 1-1-4.
Edge DetailSquare with extended flange. To create Contrasts system, flange is covered with 1-1/4" black Filler Strip.
Fire PerformanceFactory Mutual Approvals Specification tested per ASTM E84 and CAN/ULC S102. Flame Spread Index 25 or less. Smoke Developed Index 50 or less.
ASTM E1264 ClassificationFire Class – Class AUnperforated – Type XX, Pattern G Perforated – Type XX, Pattern C
Seismic InstallationsMetalWorks Linear has been engineered, tested, and approved for application in all seismic areas.
Wind Uplift Performance4" and 8" panels tested for wind uplift Classes 30, 60, and 90. Specific installation recommendations to meet these wind classes are available. For more information, contact TechLine at 1 877 ARMSTRONG.
Warranty Refer to warranty details in the back of this catalog.
Weight; Square Feet/Carton5490, 5492 – 1.61 lbs/SF; 16 pcs/ctn or 128 LF/ctn;
43 SF/ctn5491, 5493 – 1.61 lbs/SF; 10 pcs/ctn or 80 LF/ctn;
53 SF/ctn5570, 5571 – 1.61 lbs/SF; 6 pcs/ctn or 48 LF/ctn;
48 SF/ctn
(White only)
LEED® Credits Acoustics Low Emitting or CHPS
4 4
LEED for Schools
RecycledContent:
Energy Waste Recycled Local Renewable Daylight Mgmt Content Materials Materials & Views
4 4 4 Location Dependent
25% armstrong.com/greengenie
Note: Due to the non-standard suspension system of this product, call 1 877 ARMSTRONG and select options 1-1-4 to place an order with the Architectural Specialties Project Management Team.
Item Dimensions Pieces/ Numberu Description Nominal L x W x H Carton
5494 Contrasts Filler Strip 96" x 1-1/4" x 1/16" 16
5495 4" Panel Splice 4" x 3-1/4" x 9/16" 50
5496 8" Panel Splice 4" x 7-1/4" x 9/16" 50
5576 Pressure Spring 2-1/2" x 1-3/16" x 7/8" 50
5581_ _ _ _ _† 4" Panel End Cap 3-1/4" x 5/8" x 1" 50
Item Dimensions Pieces/ Numberu Description Nominal L x W x H Carton
5582_ _ _ _ _† 8" Panel End Cap 7-1/4" x 5/8" x 1" 50
5583_ _ _ _ _† 12" Panel End Cap** 11-1/4" x 5/8" x 1" 50
5572_ _ _ _ _† Standard Carrier Molding 120" x 1" x 1-7/8" 10
5574_ _ _ _ _† Flex Carrier Molding 120" x 1" x 1" 10
6351 Speed Clip 1/4" x 1/2" x 1/8" Bulk
Item Dimensions Pieces/ Number Description Nominal L x W x H Carton
5497 Standard Carrier 144" x 1-5/8" x 1-5/8" 10
5495 Flex Carrier 144" x 1-5/8" x 1" 10
Item Dimensions Pieces/ Number Description Nominal L x W x H Carton
5498 Carrier Splice 4" x 1-1/2" x 5/8" 50
5580 Carrier Hanger 2-1/4" x 3" x 1" 20
Suspension System
ColorsWhite (WH)Silver Grey (SG)Gun Metal Grey (MY)
Effects™ Maple (FXMP)Effects Cherry (FXCH) Effects Dark Cherry (FXDC)Effects Walnut (FXWN)
White Exterior (WH2)Silver Grey Exterior (SG2)Gun Metal Grey Exterior (MY2)
Effects Maple Exterior (FXMP2)Effects Cherry Exterior (FXCH2) Effects Dark Cherry Exterior (FXDC2)Effects Walnut Exterior (FXWN2)
ME
TA
LW
OR
KS