Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
METAL POWDER
CuCr1Zr
Powder Printing
Process
ENABLING YOUR ADDITIVE REVOLUTION.
When it comes to additive manufacturing with metals, Heraeus is your trusted partner throughout the process. Combining decades of experience in metal handling and recycling with our thorough expertise in additive manufacturing, we are able to provide you with real peace of mind. Our expertise in processes, powders and printing gives you with the highest degree of design freedom for your components.
With high-quality powders, batch consistency and traceability, and variable particle size distribution, we can meet even very exacting additive manufacturing demands.
In addition to supplying powders, we are also your partner for printing components and can offer you the complete manufacturing service.
Available Particle Distributions
■■ 10-45µmCustomized distributions on request
Material DescriptionHigh strength and wear resistant components can be printed using this copper alloy powder. In comparison with pure copper, components can stand higher temperatures and show a decreased tendency to tarnish. Moreover, CuCr1Zr provides high thermal and electrical conductivity, and good mechanical strength where needed compared to other copper alloys.
■■ Good mechanical properties■■ High thermal conductivity■■ High electrical conductivity
Typical Applications■■ Electrical contact technology■■ Heat exchanger components■■ Induction coils
Powder Quality■■ Gas atomized particles■■ Spherical shape■■ High purity■■ Excellent flowability
Chemical Composition
Element Concentration [wt%] acc. DIN EN 13388
Cu balance
Cr 0.5-1.2
Zr 0.03-0.3
Fe max. 0.08
Si max. 0.1
Physical Properties
Properties Value
Density [g/cm3] 8.91
Tensile strength UTS [MPa] >230
Yield strength [MPa] >185
Elec. conductivity [%IACS] <88
Elongation [%] <17
Properties as printed and annealed. Values may vary based on machines and buildconditions and are therefore only for reference.
The descriptions and engineering data shown here have been compiled by Heraeus using commonly accepted procedures, in conjunction with modern testing equipment, and have been compiled according to the latest factual knowledge in our possession.
The information was current on the date this document was printed (latest versions can always be supplied upon request). Although the data is considered accurate, we cannot guarantee the accuracy, results obtained from its use, or any patent infringement
resulting from its use (unless this is contractually and explicitly agreed in writing, in advance). The data is supplied on the condition that the user shall conduct tests to determine materials suitability for particular application.
CONTACTHeraeus Additive Manufacturing GmbHHeraeusstrasse 12-14 · 63450 Hanau, GermanyPhone +49 (0) 6181 35 3513additive-manufacturing@heraeus.comwww.heraeus-additive-manufacturing.com
As of
Sep
tem
ber 2
019
Simulation of printing processes
Design optimization
Process developmentProcess
Stable powder quality
Customized alloys
Spherical powders
High purityPowder
Own LBM & EBM equipment
Printing of prototypesPrinting