META CRAFTS : Late Adulthood.
1 .Punched Tiny
Punched tin is a traditional Mexican craft, but it was also used by early American settlers for lampshades, cabinet fronts and bed warmers. Make your own punched tin craft by punching holes in a tin or copper sheet using an awl and hammer. Special tin punch tips, patterns and kits are available online and in some craft stores. Try punching a pattern into a tin can to make a simple lantern.
2.Bottle Cap Craftsy
Turn used bottle caps into exciting new crafts instead of throwing them away. Try making earrings, necklaces and charm bracelets by punching a hole into a bottle cap and attaching it to a chain or earring hoop with a jump ring or a safety pin. Attach bottle caps to a board loosely with nails, and mount the board on a handle for a homemade musical instrument. You can even decorate bottle caps as tiny picture frames.
3. Aluminum Ornamentsy
Trace out shapes on aluminum cans and cut them out. Use either the front or back sides to make jewelry, holiday tree ornaments, garden decor, or a mobile. To make it easier, start by cutting of the top and bottom of the cans and cutting down the side to make a flat sheet of aluminum to trace and cut on. Using a nail, punch a hole at the top for hanging.
4. Metal Rain Sticky
You can make an interesting musical instrument out of a threaded metal rod and some washers. Put about a dozen 1/2-inch metal washers on a 1/2-inch all-threaded rod that is about 2 feet long. Use a nut on each end to keep the washers on, and hold the rod straight up to hear the tinkling sound as the washers travel down the rod.Read more: Easy Metal Crafts | eHow.com http://www.ehow.com/list_6737736_easy-metalcrafts.html#ixzz1iJaq7EFk
5. Recycled Aluminum Can OrnamentsBecause aluminum is light and reflective, it's an ideal material for holiday ornaments. Aluminum ornaments sparkle in the Christmas lights, and you can hang them almost anywhere without worrying about whether they're too heavy. In addition to craft scissors and safety gloves, you'll need a nail and a ballpoint pen or dull pencil. (If you have one, you may want to use an embossing tool, but the pen will do the trick.) You'll also need a way of hanging the finished ornament. Ribbon can be beautiful, but a partially unfolded paper clip also works.
To make an ornament, cut the top and bottom off the can, and make a vertical cut all the way down one side. You should be able to flatten out the sides of the can into a single rectangular sheet. You can use this sheet to create almost anything you can imagine. Use the pen or pencil to score an outline into the metal before you cut out a shape. You can use the same technique to emboss details or create fold lines on the shape. You can keep the ornament flat, or bend it into a three-dimensional shape. You can cut strips and weave an airy lattice, or even make them into leaves [source: Little House in the Suburbs]. It's up to you. Use the nail to poke a hole for hanging in the top of the ornament. Once you're done embossing and poking, sand the whole thing to remove sharp spots and get an even finish. Sanding will also get rid of the color from the can's previous life as a beverage container and prep the surface for painting, if you want to paint. Thread your ribbon or paper clip through the nail hole, and you're done. Don't throw away the bottom of the can! It's a beautiful reflective disk. Use the nail to punch a snowflake design into it, smooth out the edges, and turn it into a second ornament.
6. Recycled Aluminum Can JewelryTo turn aluminum cans into necklaces, bracelets, brooches and earrings, you'll need a few supplies: y Jewelry findings, such as pin backs, clasps, wire, jump rings (the rings that attach pendants to chains), pendant chains and earring hooks and backs (available at most craft stores) Needle-nose pliers to attach the findings to the cans and each other A hole-punch tool You may also want to play with eyelets or rivets, for which you'll need a riveter or eyelet setter. To create circular pieces of aluminum or to cut perfectly round holes, you may want to invest in a metal disc cutter, which can double as a hole punch. Aluminum discs can turn into pendants, earrings, charms on a bracelet ... the possibilities are endless. Almost any part of a can can be turned into jewelry. Designs range from the low-budget and funky to the avant-garde. Crafters have linked together pop-tabs into a modified chain, played mischievously with the can's familiar pop graphics and icons, turned the can's natural curve into a cuff bracelet and reshaped the metal into delicate floral earrings [sources: UrbanWoods, FunkyRecycling, D-Licious, Ramsay]. You might want to start with a simple design and work your way up. As you get a feel for the material and the tools, you'll be able to experiment more. Because jewelry comes into contact with clothing and skin, you must be extra careful to finish every edge and remove all sharp spots and snags. One crafter presents a clever alternative: using the manufacturer's design on the aluminum to add color, and mounting the aluminum on a precut metal disc with duller edges [source: The New New].
If you decorate your jewelry with paint, seal it with a clear lacquer or sealant. Unsealed color can easily rub off onto skin and clothes. Spray lacquer will give you a light matte or glossy finish. Use a sponge brush to apply brush-on lacquer, which provides a thicker (and sometimes more "vintage-y") finish. You may be tempted to sell your work. If you've come up with your own designs, go for it! If you've been closely imitating another artist's designs, though, you may want to read about the ethics of DIY design and copyright infringement [source: Jewelry Making].
7. Recycled Aluminum Can CandleholdersThe bottom of an aluminum can is sturdy, so you can use it to bear the weight of a candle. For each candleholder, you'll need a nail. You'll drive this up through the bottom of the can -- it becomes the spike on which you secure the candle. You'll also need a piece of wood or other secure mount for the candleholder. To make wooden mounts, find a dowel of a circumference that supports a soda can, and cut it crossways into thick disks. The simplest candleholder uses only the bottom of the can. Cut it off right at the point where the can's sides meet the angled bottom rim. Finish the edges and drive the nail in upward. The angled rim becomes the wax catcher. This candleholder is simple and silvery; you can mount it on virtually any material to create a striking candlestick. To make a flower-shaped candleholder, cut off the top half of a can and then make parallel vertical cuts down its sides, all the way around the can. The cuts should run from the top edge to about one-half inch (1 cm) from the bottom. These vertical strips turn into the petals of the flower. Use scissors to round their edges. Carefully peel each petal out and down to open the flower. Finish the edges, add the nail and mount the candleholder on a piece of wood. Use the inverted bottom of a can to create a pedestal holder for small tea light candles. Cut off the bottom so that about one-half inch (1 cm) remains of the sides. Finish the cut edges so that they're even and the bottom, inverted, sits evenly on a flat surface. If you want, decorate the sides. You can combine and mount your aluminum can candleholders in virtually endless ways: y Cut an arc from the side of a much larger tin can. Finish the edges so that it stands as a rainbow-style bridge. Arrange candleholders along it at varying heights. Affix nine candleholders to a piece of reclaimed wood to create an eco-conscious menorah. Cluster flower-style candleholders in the middle of the dinner table as a centerpiece. Instead of flattening out some of your cans, use the natural curve of the aluminum to create ornate decorative curlicues and scrolls. Between the ornaments, the gifts and the candles, you should be ready for just about any holiday that comes your way. Who knew your soda habit could be so useful?
y y y
8. Recycled Coffee Tin Storage ContainersA coffee tin is already a storage container, so recycling it is mostly a question of, cleaning it, deciding what you want to put in it and making sure it's in appropriate shape for that use. For example, if it's going to come into contact with water or dampness -- and most kitchen and workshop containers will, sooner or later -- you might want to coat it, inside and out, with a spray enamel to prevent rusting. Coffee tins can be useful in workshops for containing hazardous materials, such as paint thinner and other solvents. The plastic lid protects against spills and keeps the potentially harmful vapors from escaping. In the kitchen, you can use a recycled coffee tin to recycle another resource: pan drippings. Drippings -the fat left over from cooking meat -- are loaded with flavor, and cooks have been using them for centuries to give savory weight to dishes. But it can be a messy process without a good container. The coffee tin makes it easy. Set a coffee filter over the opening of the tin. While pan drippings are still hot, pour them through the coffee filter into the tin. (The filter removes the large particles of food, which will scorch if cooked later.) Put the lid on the coffee tin and pop it into the freezer so that the grease solidifies. The next time you need a bit of cooking fat, you can easily scoop it out. Coffee tins are, naturally, terrific food storage containers, especially for dry goods. They're lightweight, they stack well and the plastic lids provide a good barrier against pathogens and staleness. If pantry organization is a problem, you could use coffee tins -- painted in different colors and labeled -- to create a bright, modular set of storage bins for baking ingredients. Coffee tins are also a useful way t