Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
General Catalog
MetalDetectors
Agents
Japan office
For more information, contact our office listed below.The contents of the specifications are subject to change without prior notice due to continual improvement.
Japan
157 Kanawa, Kitamachi, Nagaoka, Niigata 9402121, JapanTEL +81-258-47-1377 FAX +81-258-47-0161
AgentsKorea ・Taiwan・China・Philippines・Thailand・SingaporeAustralia・Europe・United Arab Emirates・Malaysia・IndonesiaVietnam・Mexico
Japan officeSapporo・Iwate・Sendai・Niigata・Tokyo・Shizuoka・ToyamaNagoya・Kansai・Hiroshima・Shikoku・Fukuoka・Kagoshima
www.system-square.com/en/
Head Office / Head Plant
SC206-061-B-DL
Functions and features
To get better sensitivity
Keep temperature of product as low as possible. Avoidtemperature change of product.
Select suitable coil Inspect individual package
Make thickness of products flat, or make thickness ofproducts thin
Select suitable coil because using large coil for small products causes worse sensitivity.
It is possible to keep stable sensitivity if the product is flat and thin, or if the product has no partial deflection in package.
Better sensitivity can be expected with smaller coil
Product effect of frozen product is the smallest. Product effect becomes bigger and bigger if temperature of product becomes higher and higher.
Detection sensitivity
Level meter display
Comfortable operation with large touch panel LCD
Advanced ECP functionIn the MetaHawk3, this ECP function has been further advanced using the leading-edge data analysis technology. Use of this function makes it possible to precisely detect products containing water content or salt content with large effects as well as products with small effects.
2-frequency inspectionBoth Fe and SUS foreign objects can be detected with high sensitivity.(System Square incorporated this 2-frequency inspection technology into the mass-production machines, first in the world and already has 10-year past experiences.)
NGlineNG
NG
NG
NG
Example of detection sensitivity ※The detection sensitivity may vary depending on the product.
Hamburger A Hamburger A
One-touch display change
Inspection Q’tydisplay
Inspection resultmagnification display
kinds ofinspection screens
Operator friendlyoperabilityEveryone can operate the system.
kinds ofinspection functions
Continuously improvedbasic performancesAlways aiming at leading-edgehigh sensitivity
“V mode inspection” New systemAs the product features are visualized using multiple phases, even fine changes are identified to achieve high sensitivity.
OK waveform NG waveform (green)
Phase A Phase A
Phase B
Phase B
Effe
cts
of p
rodu
ct Large
Small
Producteffect graph
Phase anglePhase angleInspection point
Image of 2-frequency inspectionLow frequency(Forferrous foreign bodies)
High frequency(Fornonferrous foreign bodies)
Product
Frozen Half frozen Chilled Normal High
Better Worse
Fe
SUS
Mode
φ0.6mm~φ0.7mm
φ1.5mm~φ2.0mm
φ0.8mm~φ1.0mm
φ2.0mm~φ2.0mm
Surimi
WET H WET H【META HAWKⅡ 3008】【Meta Hawk3-3008】
V-mode inspection Conventional system(Normal inspection)
Fe
SUS
Mode
φ0.7mm~φ0.8mm
φ2.0mm~φ2.0mm
φ0.8mm~φ0.8mm
φ2.0mm~φ2.4mm
Sausage
WET H WET H【META HAWKⅡ 3008】【Meta Hawk3-3008】
V-mode inspection Conventional system(Normal inspection)
Fe
SUS
Mode
φ0.5mm~φ0.6mm
φ1.5mm~φ1.5mm
φ1.0mm~φ1.0mm
φ2.0mm~φ2.0mm
Sliced ham
WET HMagnification3.0
WET HMagnification3.0
【META HAWKⅡ 3008】【Meta Hawk3-3008】
V-mode inspection Conventional system(Normal inspection)
Easy automatic sensitivity setting
Difficult selection of inspection mode… Just operat fllowing to instruction on screen… Everyone can set the best sensitivity
Hamburger A① DRY H(1-frequency)
② DRY L(1-frequency)
③ WET H(2-frequency)
④ WET L(2-frequency)
⑤ ALM (1-frequency)Five
insp
ectio
n m
odes
Hamburger A
Easy inputs of products' name Easy confirmation of registered products Easy understanding with illustration and graphProduct selection screen Sorting machine setting screenProduct name input screen
Hamburger A
Functions and features
Line A
Line B
Line C
Office (Personal Computer)
Access mode selection
The data of multiple machines can be managed with PC through the LAN network.Data management through network (option)
User mode
Administration mode
Enhanced communication function4 serial ports and LAN port is available for communication between PC, labeler, bar code, printer, etc.Pass word is required to change access mode
The inspection history data is transferred to PC for the management.(10,000 histories can be saved)
Simple structure
The machine is capable of handling lines involved with water with sufficiently high sensitivity.It can be cleaned with water.The IP66 dust protection and waterproof standard is satisfied
Importance of the quality control increases further.
Easy cleaning
Waterproofing model has simple frame structure made with stainless steel. It provides easy cleaning and high hygiene.Timing belt is located outside of frame, so that it never interferes transportation belt.
2014/03/13 10:36:54 Inspection start No. 2 Product name Hamburger A2014/03/13 10:36:54 F LV=10.0 AD=1002014/03/13 10:36:55 Inspection end TOTAL=35 OK=80 NG=2
※Image of display on PC
2014/03/12 11:43 Inspection start No.1 Product name sausage2
2014/03/12 11:44 P
2014/03/12 11:45 Inspection end TOTAL=53
Date and time of inspection start Product No. Product name
Date and time of NG detection NG level NG value
Date and time of inspection end Total of inspection OK number NG number
LV=40.0 AD=400
NG=3OK=50
…
Hub
Protect from incorrect settings by inexperienced operators. Pass word is required to change access mode.
Detergent Cleaning toolsHydraulic pressure Water temperature
Max.Runningwater
Head1m Max.
Consult us if ozone sterilization, alkaline/acid detergent or salt water is to be used.
NeutraldetergentNeutral
detergentSoft plastic brush
Metal wire brush
Waste cloth
Extensivemanagement
functions
USB data management (option)
40
Enhanced history function
Inspection historyStatistic displayInspection historyThe final inspection records remain and can be checked later. This inspection history is also effective as prevention of missing periodic inspection.
General history from the inspection start to the inspection end. This display is used as inspection result daily report.
Event
Error
Work history, such as machine setting changeMachine and software error history
Hamburger AHamburger A Hamburger A
Easy cleaningOne-touch detachment/attachment of the conveyors requiring the frequent cleaning ensures the sanitary system.
Large size metal detector (Option)Small size metal detector
Timing belt neverinterfere transportation belt.Easy cleaning frame
PL
ISO
HACCP
(Product Liability)PL(Product Liability)
When it is proven that the defect of the product has the casual relationship with the damage if the customer had the threat to life, personal injury, or property damage caused by the defect of the product, the manufacturer shall accept responsibility regardless of the intentional or negligent detect.
ISO(International Organization forStandardization)International standards to promote the distribution of goods and services. For example, there are quality assurance standard ISO9000 for the quality assurance management from the design phase to the after-sales service and environmental management standard ISO14001 for the production, service, and management.
HACCP(Hazard Analysis & CriticalControl Point)Hazard that may occur in the food processing is analyzed (HA) and critical control point needing particular measures for the hazard is found (CCP). This point is monitored strictly to maintain the safety.
International Organizationfor Standardization
Hazard Analysis &Critical Control Point
( )( )
SD3-45TypeCompact size Metal DetectorsSD3-30Type
For inspection of small products,such as small snack bagsApplicable to a passage width of up to 30 cm
For inspection of productscontained in larger traysApplicable to a passage width of up to 45 cm
Model(SD3-XXXXD/W)
Detection sensitivity(mm)
Fe
Power requirements
3008 3010 3012 3015 3018
300Maximum passage height (mm)Maximum passage width (mm)
SUS304Belt speed
Conveyor sizeUpon detection of metal
Transport weight
Mass(kg)
24m/min(50Hz)800mm(length)×220mm(belt width)
Belt stopped, buzzer warning or automatic sorting (option)3kg
80 100 120 150 180φ0.4 φ0.45 φ0.5 φ0.55 φ0.6φ0.7 φ0.8 φ0.9 φ0.95 φ1.0
82 83 84 86 88
4508 4510 4512 4515 4518
Power requirements
Belt speedConveyor size
Upon detection of metalTransport weight
Mass(kg)
450
24m/min(50Hz)800mm(length)×350mm(belt width)
3kg
80 100 120 150 180φ0.45 φ0.5 φ0.55 φ0.6 φ0.7φ0.8 φ0.9 φ1.0 φ1.1 φ1.2
107 108 109 112 115
60φ0.35φ0.65
84
3006 4506
60φ0.4φ0.7
109
Model(SD3-XXXXD/W)
Detection sensitivity(mm)
FeMaximum passage height (mm)Maximum passage width (mm)
SUS304
Belt stopped, buzzer warning or automatic sorting (option)
Compact size Metal Detectors
800
H2
750
±50
Pass
line
H1
Pass
age
heig
ht
508
220
300
380.
5
Belt w
idth
Max
imum
pas
sage
widt
hM
axim
um p
assa
ge w
idth
Conv
eyor
widt
h
φ45
Unit: mm
SD3-3008D/W 80 1113±50SD3-3010D/WSD3-3012D/WSD3-3015D/WSD3-3018D/W
100120150180
1133±501153±501183±501213±50
H1 H2SD3-3006D/W 60 1103±50
658
Unit: mm
SD3-4508D/W 80 1113±50SD3-4510D/WSD3-4512D/WSD3-4515D/WSD3-4518D/W
100120150180
1133±501153±501183±501213±50
H1 H2
350
450
518
Belt w
idth
Max
imum
pas
sage
widt
hM
axim
um p
assa
ge w
idth
Conv
eyor
widt
h
800
H2
750
±50
Pass
line
H1
Pass
age
heig
ht
φ45
SD3-4506D/W 60 1103±50
AC100V±10%/AC200V±10%、50/60Hz、200VA AC100V±10%/AC200V±10%、50/60Hz、200VA
The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.
Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)
It copes with conveyance of heavy items (20Kg) On the conveyor Applicable to a passage width of up to 60 cm
Mass(kg)
6007 6009 6011 6014 6017 6020 6025 6030 6035600
AC100V±10%/AC200V±10%、50/60Hz、300VA or Three-phase AC200V±10%、50/60Hz、550VA(up to 30kg)
24m/min(50Hz)
Conveyor belt easy attach and remove system is option.Conveyor belt easy attach and remove system is option.
Model(SD3-XXXXBD/W)
Detectionsensitivity(mm)
Fe
4505 4507 4509 4511 4514
24m/min(50Hz)
Maximum passage height (mm)
Maximum passage width (mm)
Belt speed
Conveyor size
Upon detection of metal
Transport weight
Power requirements
4517 4520 4525 4530 4535
450
SUS304
50 70 90 110 140 170 200 250 300 350φ0.4 φ0.55
φ0.85 φ0.95
φ0.45 φ0.5 φ0.6 φ0.7 φ0.7 φ0.8 φ0.9 φ1.0
φ1.2 φ1.4 φ1.5 φ1.7 φ2.0φ0.9 φ1.0 φ1.1
1,200mm(length)×350mm(belt widt)
Belt stopped, buzzer warning or automatic sorting (option)
20Kg(In the case of Three-phase AC200V, it is possible to cope under 30Kg)
AC100V±10%/AC200V±10%、50/60Hz、300VA or Three-phase AC200V±10%、50/60Hz、550VA(up to 30kg)
Model(SD3-XXXXD/W)
Detectionsensitivity(mm)
FeMaximum passage height (mm)
Maximum passage width (mm)
SUS304
70 90 110 140 170 200 250 300 350φ0.5 φ0.6φ1.0 φ1.2
φ0.55 φ0.55 φ0.7 φ0.8 φ0.8 φ1.0 φ1.2φ1.5 φ1.5 φ1.7 φ2.0φ1.1 φ1.3 φ1.5
Belt speedConveyor size
Upon detection of metalTransport weight
Power requirements20Kg (In the case of Three-phase AC200V, it is possible to cope under 30Kg)
1500mm(length)×500mm(belt width)Belt stopped, buzzer warning or automatic sorting (option)
186 187 188 194 199 202 204 210 216
SD3-45BTypeMedium size Metal Detectors SD3-60TypeLarge size Metal Detectors
For inspection of products contained in large boxesand bags, such as rice, wheat flour, and cereals, etc
For inspection of products contained in large boxesand bags, such as rice, wheat flour, and cereals, etc
Belt w
idth
Max
imum
pas
sage
widt
hM
axim
um p
assa
ge w
idth
Conv
eyor
widt
h
666
350
450
Belt w
idth
Max
imum
pas
sage
widt
h
H2
750±
50H
1Pa
ssag
ehe
ight1200
Pass
line
Unit: mm
H1 H2SD3-4505BD/W 50 1106±50SD3-4507BD/W 70 1106±50SD3-4509BD/W 90 1126±50SD3-4511BD/W 110 1146±50SD3-4514BD/W 140 1176±50SD3-4517BD/W 170 1206±50SD3-4520BD/W 200 1236±50SD3-4525BD/W 250 1286±50SD3-4530BD/W 300 1336±50SD3-4535BD/W 350 1386±50
817
500
750
600 H
2
750±
50H
1Pa
ssag
ehe
ight
1500
Pass
line
1106
1206
112611461176
123612861336
Unit: mm
H1 H2SD3-6007D/W 70SD3-6009D/W 90SD3-6011D/W 110SD3-6014D/W 140SD3-6017D/W 170SD3-6020D/W 200SD3-6025D/W 250SD3-6030D/W 300SD3-6035D/W 350 1386
The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.
Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)
Applicable to a passage width of up to 80 cm This model is suitable for inspection of products that drop naturally. A compact coilcan be assembled into the pipe line.
8013 8016 8019 8025 8035
800
AC100V±10%、AC200V±10%、50/60Hz、300VA or Three-phase AC200V±10%、50/60Hz、550VA(up to 30kg)
24m/min(50Hz)
For inspection of larger box and bag products
Conveyor belt easy attach and remove system is option.
080 100 130 150 180 200 250
SoybeanBuzzer warning, detection signal
Product passage diameter(Reference value) (mm)
Maximum passage height (mm)Maximum passage width (mm)
Detection sensitivity(mm)
FeSUS304
Model(SD3-XXXXD/W)
130 160 190 250 350φ0.8 φ1.2
φ1.5 φ1.5
φ0.9 φ1.0 φ2.0
φ1.5 φ2.0 φ2.5
1500mm(length)×700mm(belt width)Belt stopped, buzzer warning or automatic sorting (option)
20Kg (In the case of Three-phase AC200V, it is possible to cope under 30Kg)
223 226 229 237 253
8030
300φ1.5
φ2.4
245Mass(kg)
Belt speedConveyor size
Upon detection of metalTransport weight
Power requirements
Model(SD3-XXXCD/W)
Coil diameter (mm)
φ0.4 φ0.5φ0.7 φ0.8
φ0.4 φ0.5 φ0.6 φ0.7 φ0.8φ1.2 φ1.5φ0.7 φ0.8 φ1.0
Fe
φ80 φ150
φ60 φ110
φ100 φ130 φ180 φ200 φ250
φ180 φ230φ80 φ130 φ160
1t/h2t/h
2t/h4t/h
3.5t/h7t/h
5t/h10t/h
7t/h14t/h
9t/h18t/h
15t/h30t/h
Minute powder
Detection sensitivity(mm) SUS304
Amount of processing (Reference value)
Mass(kg)
Upon detection of metal
Power requirements AC100 - 240V±10%、50/60Hz、120VA
35 37 45 50 52 53 58
A
SD3-80TypeLarge size Metal Detectors
For inspection of rice,wheat flour, bread crumbs,snack food, cereals, and pellets, etc.
Circular type Metal Detectors
1500
H2
750±
50H
1Pa
ssag
ehe
ight
Pass
line70
0Be
lt widt
h
Max
imum
pas
sage
widt
h95
0Co
nvey
or w
idth
800
1017
966
1136
99610261086
Unit: mm
H1 H2SD3-8013D/W 130SD3-8016D/W 160SD3-8019D/W 190SD3-8025D/W 250SD3-8030D/W 300
1186SD3-8035D/W 350
520
240200
550
φ8
B
C
D EF
F
SD3-080CD/WSD3-100CD/WSD3-130CD/WSD3-150CD/WSD3-180CD/WSD3-200CD/WSD3-250CD/W
80100130150180200250
280280310330360380430
369369398419449469519
220220220260260260360
160160160160160160160
303030505050100
A B C D E F
Unit: mm
The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)The detection sensitivity represent the values when only a test piece is passed through the aperture.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)
This model is suitable for inspection of products that drop naturally.Sorting machine is incorporated. Pipe is detachable with one-touch operation and capable of easy cleaning.
Model
Inside diameter ofcoil opening
SD3-100RW-1.0S
SD3-100RW-1.5S
SD3-100RW-2.0S
SD3-100RW-2.5S
SD3-100RW-3.0S
φ0.4
Model SD3-100CD/W-DF1710 SD3-3008D/W-Y-DF3010
Maximum passage width (mm)
Amount of processing(Reference value)
IDFferrule
For inspection of rice, wheat flour, and plastic pellets, etc. For inspection of paste or fluid products, such as miso,minced meat, or jam.
Detection sensitivity(mm)
Fe
SUS304
Power requirements
Mass(kg)
Sorting method
Air supply source
82×282
φ0.5
φ1.0
φ0.4
φ0.7
φ87
Integrated damper-type sorter
AC100 - 240V±10%、50/60Hz、120VA
0.5~0.7Mpa
Minute powder…2t/h Soybean…4t/h Minute powder…6t/h Soybean…12t/h
99 170
Detectionsensitivity
(mm)
Fe
SUS304
Pipe size (inch)
Height of inlet/outlet
Ferrule shapeMaximum passageflow rate(ℓ/h)*1
Withstand pressure(MPa)*2
Heatprooftemperature(℃)*2Sorting method
Ball valve operationPower requirementsAir suppry source
AccessoryMass(kg)
1.5 2.0 2.5 3.01.0
750mm
1200 2000 4500 7000500
0.7 0.5 0.5 0.50.880 80 80 8080
Air driven 3-way ball valveOperating temperature range: -5℃ to 95℃,
Max. operating pressure: 0.7 MPa, IP55AC100 - 240V±10%、50/60Hz、120VA
0.4~0.7MpaHook spanner, clamp
94 100 107 11191
SD3-100RW-1.0S
SD3-100RW-1.5S
SD3-100RW-2.0S
SD3-100RW-2.5S
SD3-100RW-3.0SModel
φ0.7
φ100
*1:The flow rate may drop as the selection valve change-over time is needed depending on the viscosity of the fluid to be used.*2:This shows reference values in the case of 20℃. The withstand pressure may depend on the operating temperature. Contact System Square for further information.
Drop type Metal Detectors Pipe transfer type Metal Detectors
217 289
NG
506
directionof flow
A
750
±50
Pass
line
1085
±50
Pass
line
APipe size (inch) 1.0 1.5 2.0 2.5 3.0
975 985 1000 1010 1020
SD3-3008D/W-Y-DF3010
SD3-100CD/W-DF1710
*The sections indicated with dotted line are option.
φ87(Product passage size)
426
390
750
622
82×282(Product passage size)
560
470 75
0
847
Schematics of sorting operation
Inlet Inlet
Metal detectorsection
OK product NG productInitial velocity point=300mm (It is changed by inspection condition.)
Sorting section
The detection sensitivity represent the values when only a test piece is passed through the aperture.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)The detection sensitivity represent the values when only a test piece is passed through the aperture.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)
Even magnetized needles used for baby pigswhichcannot be detected conventionallycan be detected accurately.
Special machines
FeBelt speed
Transport weight
Coil type
4505 6517P 9617P 11825P
Conveyor size(mm)Belt width
24m/min(50Hz)
30kgBelt stopped, buzzer warning or automatic sorting (option)
Three-phase AC200V±10%、50/60Hz、700VAAC100V±10%、50/60Hz、450VA20kg
Opposed coilConcentric loop coil
170
For inspection of block meat,such as beef and pork.
Options
Model(SD3-XXXXVW)
Maximum passage height (mm)Maximum passage width (mm)
Detection sensitivity(mm)
LengthUpon detection of metal
Mass(kg) 210 300 380 500
325 485 770 980
φ0.6 φ2.0φ1.2 φ1.850 250
200 350 500 7001800 28002200 2600
Power requirements
for needlesMetal Detectors
Top seal Vertical type
Drop type Wide type
Seal Inspection Machinewith Metal Detector
Chute type
Signal lampSignal lamp
Overflow prevention guideOverflow prevention guide
PrinterPrinter
Workpiece guideWorkpiece guide
Transfer plateTransfer plate
Overflowprevention guideOverflowprevention guideEmergencystop switchEmergencystop switch
Transfer rollerTransfer roller
ScraperScraper
Conveyorheight adjusterConveyorheight adjuster CasterCaster
Anchor metal fittingsAnchor metal fittings
SD3-4505VW SD3-6517PVW/ SD3-9617PVW/ SD3-11825PVW
1093
1350
750±
50Pa
ss li
ne50
Pass
age
heig
ht
1800
377
313
200 Belt widthMaximum passage width
450 Conveyor width325
L1 Belt widthMaximum passage width
L3Conveyor widthL2
BA
C
D
Pass
age
heig
ht
750±
50Pa
ss li
neF
E
A B C D E FSD3-6517PVWSD3-9617PVWSD3-11825PVW
350500700
175021502350
120512051285
170170250
220026002800
488632734
424567668
485770980
600750950
L1 L2 L3
Unit: mm
Conveyor belt easy attachand remove systemConveyor belt easy attachand remove system
The detection sensitivity represent the values when only a test piece is fed over the belt surface.The detection sensitivity depends on the product and/or operating environment.Please make sure that something such as products are not going to hit the inside of the aperture. The specifications are subject to change without prior notice due to improvement.
D (non-waterproof) / W (waterproof)
Coils
M8 Depth:15
AB
C
DE
F G HI
J
K L M N
D
N
O
P Q R
S T
39
Rubber, Φ45Screw M8 Length: 29
To inspection coil
With anti-vibration rubber
SD3-30,45,60 type With anti-vibration rubberSD3-80 type
M8 Depth:15 Rubber, φ45Screw M8 Length: 29
Example of transfer system
Independent operation box
A B C D E F G H I J K L M N O P Q R S Mass
54
50
52
54
56
58
62
58
60
62
64
66
76
83
90
72
72
70
70
80
85
88
90
96
102
T
3006
3008
3010
3012
3015
3018
4506
4508
4510
4512
4515
4518
4521
4527
4532
6005
6007
6009
6011
6014
6017
6020
6025
6030
6035
481
481
501
521
551
581
481
481
501
521
551
581
611
671
721
481
481
501
521
551
581
611
671
721
771
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
296
296
316
336
366
396
296
296
316
336
366
396
426
486
536
296
296
316
336
366
396
426
486
536
586
108
98
98
98
98
98
108
98
98
98
98
98
98
98
98
108
98
98
98
98
98
98
98
98
98
80
100
120
140
170
200
80
100
120
140
170
200
230
290
340
80
100
120
140
170
200
230
290
340
390
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
300
300
300
300
300
300
450
450
450
450
450
450
450
450
450
600
600
600
600
600
600
600
600
600
600
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
508
508
508
508
508
508
658
658
658
658
658
658
658
658
658
808
808
808
808
808
808
808
808
808
808
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
236
266
266
296
296
296
296
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
52
52
52
52
52
52
52
52
52
52
328
328
328
328
328
328
478
478
478
478
478
478
478
478
478
630
630
630
630
630
630
630
630
630
630
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
126
126
126
126
43
43
58
58
58
58
36
36
36
36
36
36
36
36
36
36
36
36
66
66
66
28
28
28
28
28
28
28
28
28
28
164
164
164
164
164
164
164
164
164
164
164
164
164
164
164
180
180
180
180
180
180
180
180
180
180
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
57
57
57
57
57
57
57
57
57
57
328
328
328
328
328
328
478
478
478
478
478
478
478
478
478
620
620
620
620
620
620
620
620
620
620
128
128
128
128
128
128
128
128
128
128
128
128
128
128
128
132
132
132
132
132
132
132
132
132
132
354
354
354
354
354
354
354
354
354
354
354
354
354
354
354
415
415
415
415
415
415
415
415
415
415
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
465
465
465
465
465
465
465
465
465
465
*It is possible to provide metal detector coil part only. *Please ask us about other special coil size.
Mass(kg±10%)
(kg±10%)
*Maintenance space ~~
240200
520
550
φ8
K L M
A
BC
DE
D
F GH
I
N
N
O J
39
ST
P Q R
A B C D E F G H I J K L M N O P Q R S
68
71
76
83
90
95
102
108
115
T
8005 531 235 296 108 80 141 800 67 1008 236 127 830 52 28 180 132 820 57 415 465
8007 531 235 296 98 100 141 800 67 1008 236 127 830 52 28 180 132 820 57 415 465
8009 551 235 316 98 120 141 800 67 1008 236 127 830 52 28 180 132 820 57 415 465
8011 571 235 336 98 140 141 800 67 1008 236 127 830 52 28 180 132 820 57 415 465
8013 601 235 366 98 170 141 800 67 1008 266 127 830 52 43 180 132 820 57 415 465
8016 631 235 396 98 200 141 800 67 1008 266 127 830 52 43 180 132 820 57 415 465
8019 661 235 426 98 230 141 800 67 1008 296 127 830 52 58 180 132 820 57 415 465
8025 721 235 486 98 290 141 800 67 1008 296 127 830 52 58 180 132 820 57 415 465
8030 771 235 536 98 340 141 800 67 1008 296 127 830 52 58 180 132 820 57 415 465
1208035 821 235 586 98 390 141 800 67 1008 296 127 830 52 58 180 132 820 57 415 465
167
398
100※ 100※
Sorting machines
Air jet system
Dropout system(with belt)
Dropout system(with chute)
Flipper system
Shuttle conveyor
Model US220D/W US350D/WUS500D/W
2directions
~5kg*
0.5Mpa-0.7Mpa
7kg
0.5L/time(ANR)
8kg 10kg
Model AR001Sorting
directionTransport
weightCompressed
air source
Mass
Airconsumption
2directions
~0.3kg*
0.5Mpa-0.85Mpa
16L/time(ANR)
3kg
Model
Dimension
2directions
~5kg*
0.5Mpa-0.7Mpa
22kg
W350×L350
1.0L/time(ANR)
28kg 37kg
W500×L500 W730×L650
DV250W DV400BW DV540BW
Model FL220D/W FL350D/W
3directions
~3kg*
0.5Mpa-0.7Mpa
37kg
W400×L700
0.4L/time(ANR)
70kg
W550×L800
Model SS250W SS400W
2directions
~5kg*
0.5Mpa-0.7Mpa
40kg
W393×L700
2.8L/time(ANR)
50kg
W543×L700
A
B
SS250W SS400W
240
393
390
543
A
B
220
400
350
550
FL220D/W FL350D/W
C 700 800
A
B
C
250
750±5025°
540
750±5024.1°
DV250W DV400BW DV540BW
D
E
F
350350
133
730650
253
400
750±5030°
500500
230
Model DS220D/W DS350D/WDS500D/W
2directions
~5kg*
0.5Mpa-0.7Mpa
7kg
0.5L/time(ANR)
8kg 10kg
Downward
Upward
NGProduct
NGProduct
NGProduct
NGProduct
NGProduct
NGProduct
SortingdirectionTransport
weightCompressed
air source
Mass
Airconsumption
SortingdirectionTransport
weightCompressed
air source
Mass
Airconsumption
SortingdirectionTransport
weightCompressed
air source
Mass
Airconsumption
Dimension
SortingdirectionTransport
weightCompressed
air source
Mass
Airconsumption
Dimension
SortingdirectionTransport
weightCompressed
air source
Mass
Airconsumption
A B
(Bel
t wid
th)
A(B
elt w
idth)
B
A(B
elt w
idth)
B
557
50゜
750±
50
C 34
700
(Stroke)
750±
50
(Pas
s lin
e )
(Pa
ss li
ne)
200
(Pas
s lin
e )
AS22*1F-01-06S
D
C
E
F
Wide type Narrow type
W: Dimension in belt width direction, L: Dimension in transport direction (The dimensions are reference values.)*Sorting capacity depends on product that is let passing through.
W: Dimension in belt width direction, L: Dimension in transport direction (The dimensions are reference values.)*Sorting capacity depends on product that is let passing through.