Embed Size (px)
Citation preview
AND ANY MAJOR CHANGE IN THE BASIC FACILITIES, OR IN THE LOCATION THEREOF,SHALL BE IMMEDIATELY REPORTED TO THE APPROPRIATE REGIONAL OFFICE OF THE FEDERAL AVIATION ADMINISTRATION
UNITED STATES OF AMERICA
DEPARTMENT OF TRANSPORTATIONFEDERAL AVIATION ADMINISTRATION
FAA Form 8000-4 (1-67) SUPERSEDES FAA FORM 390. Electronic Forms (PDF)
Air Agency CertificateNumber
This certificate is issued to
whose business address is
upon finding that its organization complies in all respects with the requirements of the Federal Aviation Regulations relating to the establishment of an Air Agency, and is empowered to operate an approved
with the following ratings:
This certificate, unless canceled, suspended, or revoked, shall continue in effect
Date issued:By direction of the Administrator
This Certificate is not Transferable,
FOR_____________________________________
PEARTREE BUSINESS CENTRE, COBHAM ROAD FERNDOWN, DORSET, BH21 7PT
UNITED KINGDOM
GRIFFITHS AERO LIMITED d/b/a MARILAKE AERO SYSTEMS
JUNE 11, 2009
until JULY 31, 2022
5GFY384B
REPAIR STATION
LIMITED ACCESSORY LIMITED INSTRUMENTS
LIMITED RADIO (NOVEMBER 20, 2012) LIMITED AIRFRAME (NOVEMBER 20, 2012)
LIMITED PROPELLER (JUNE 15, 2016)
Nicholas Tsokris, Manager, New York IFO
24th January 2021
Griffiths Aero Limited
Wednesday, February 13, 2019 at 10:02:22 AM Greenwich Mean Time
Page 1 of 5
Subject: RE: CONFIRMATION OF ISSUANCE OF CERTIFICATE EASA.UK.145.01186 / 60065814 /309655 // UK.145.01186 GRIFFITHS AERO LTD Third Country Operator Approval, applicantreference 20397 GRIFFITHS AERO
Date: Friday, 1 February 2019 at 00:46:24 Greenwich Mean TimeFrom: foreign145To: '[email protected]'CC: '[email protected]', '[email protected]'AGachments: image001.png, image002.png, image003.png, image004.jpg, image005.png, image007.jpg,
image008.png, image009.png, image010.png
CONFIRMATION OF ISSUANCE OF CERTIFICATE EASA Task Number: 60065814 EASA Approval Number: EASA.UK.145.01186
Dear Sir / Madam, Following your early applica\on for third country approval in the context of Brexit and payment of therelated fee, we are pleased to announce that your EASA cer\ficate has been issued. As explained in our previous email and on our website, this EASA cer\ficate is subject to the following:• Your EASA cer\ficate is valid as of March 30, 2019.• The electronic copy of your EASA cer\ficate will be sent to you on March 30, 2019. The hard copy
will be sent to you the following week.• The surveillance cycle/recurrent phase will start on March 30, 2019, following the standard EASA
procedures and fees in accordance with Commission Regula\on (EU) No. 319/2014. Please visit ourwebsite for further details on the fees. (hdps://www.easa.europa.eu/brexit)
As the withdrawal and transi\onal agreement nego\a\ons between the European Commission and theUK Government are currently ongoing, you are invited to consult publically available sources ofinforma\on:
• The ‘No\ce to stakeholders’ published by the Commission on April 13 2018, and any updates; • The website of the Commission on air transport, including avia\on safety
(hdps://ec.europa.eu/transport/modes/air_en);• Our own website for the latest informa\on from us (hdps://www.easa.europa.eu/brexit).
Caroline RUGAApplicant Rela\ons Sec\on ManagerEuropean Avia\on Safety Agency
Tel.: +49 221 89990 4028Postal: Posjach 10 12 53, 50452 Cologne, GermanyAn agency of the European Union
The use of the UKAS Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 015 held by NQA. NQA is a trading name of NQA Certification Limited, Registration No. 09351758. Registered Office: Warwick House, Houghton Hall Park, Houghton Regis, Dunstable Bedfordshire LU5 5ZX, United Kingdom. This certificate is the property of NQA and must be returned on request.
Page 1 of 1
This is to certify that the Quality Management System of:
Griffiths Aero Ltd T/A Marilake Aero Systems
Peartree Business Centre, Cobham Road, Ferndown Industrial Estate, Wimborne, Dorset,
BH21 7PT, United Kingdom
applicable to:
The manufacture, repair, overhaul and modification of avionic and associated
equipment. The manufacture and assembly of airborne display systems for civil and
military applications
has been assessed and registered by NQA against the provisions of:
AS9100D & ISO 9001:2015
in accordance with the requirements of EN 9104-001:2013. This registration is subject to the
company maintaining a quality management system, to the above standard, which will be
monitored by NQA.
FManaging Director
Certificate No: 25088
24 June 1997ISO Approval Date:
ASCS Approval Date: 24 June 1997
Issue Date: 14 December 2018
Expiry Date: 13 December 2021
EAC Code: 21, 19
Site Structure: Single Site
