Mercury Marine Outboard Brochure 2014

Over 70 years of Mercury Innovation With leading edge technology and efficiency, Mercury has led the way with innovation since 1939. Today, Mercury Marine outboards continue the proud tradition of creating engines that continue to break the mould. Explore the range of precision Mercury Outboard engines and you’ll find hard facts on why more and more boat owners are starting up a Mercury. Mercury Outboards are simply the best, most refined engines money can buy for any application.

First when it counts

Contents

1940s First with forged aluminium pistons

1950s Fully integrated shock absorbers introduced

1957 First 6 cylinder in-line outboard

1960s First through-prop exhaust

1962 First 100hp outboard and MerCruiser® Sterndrive

1966 Introduction of Thunderbolt “breakerless” ignition

1969 New corrosion resistant technology

1975 175hp Black Max V6 outboard launched

1988 First Electronic Fuel Injection (EFI) systems

1996 First Direct Injection TwoStroke outboard, the Mercury OptiMax®

2003 First Digital Throttle & Shift (DTS) controls introduced

2004 First Supercharged FourStroke outboard, the Mercury Verado®

2006 New generation 75hp-115hp models – to create the largest range of EFI FourStrokes

2007 The world’s lightest 200hp FourStroke and a new 300hp Verado

2009 Launch of the new 350hp Verado

2011 The world’s lightest 150hp FourStroke outboard

2013 First Outboard Joystick Piloting system with GPS integration

40s

50s

60s

70s

80s

90s

21st

Verado

Verado® Overview 6 Verado® Range 8

FourStroke

FourStroke Overview 10 FourStroke 150hp EFI 12 FourStroke Range 13 FourStroke Portable Range 16

OptiMax

OptiMax® Overview 18 OptiMax® ProXS Range 20 OptiMax® Range 22

TwoStroke

TwoStroke Overview 24 TwoStroke Range 26 TwoStroke Portable Range 28

Mercury Propellers 30 BigTiller / Mercury Oils & Lubes 31 Engine Specifications 32

33

Mercury Extreme ReliabilityBoating is not often thought of as a harsh environment. Just stop and think about it. Marine engines can and are often used for extended periods at wide-open throttle in harsh saltwater and full UV sunlight. Then sit in storage over the off season, in some cases without any use.

At Mercury, we test our engines mercilessly and use those results to make them even more reliable. The tougher the test, the tougher the engine. We put our engines through tests such as vicious log strikes, saltwater spray booths, high humidity chambers and hot and cold water temperatures. That’s just phase one of our brutal testing process. Then we run each engine rigorously for thousands of hours to prove it can stand the test of time. So whatever you put the engine through we have already done it.

We not only test our engines meticulously, we support them with an industry leading warranty too.

3-year Corrosion Warranty

A lot of manufacturers talk about their corrosion resistant outboards but Mercury Marine is the only manufacturer who backs it up with an exclusive 3-year limited corrosion warranty. And that’s only the beginning.

Corrosion Resistance

There is a big difference in metals and how they react in saltwater. That difference can be the choice between years of boating fun or costly corrosion failures and high labour bills. Mercury’s proprietary formula is melted at our foundry in Fond Du Lac, WI, USA. We call it XK360. It is an extremely low copper content aluminium alloy, which leads the industry in corrosion resistance. Mercury Marine’s XK360 alloy is not just the industry leader, it is the industry standard.

Unbeatable Warranty

All recreational models from the 300hp Verado to a 2.5hp TwoStroke Mercury Outboard, receive a fully transferable, non declining warranty that goes deeper than the rest. A comprehensive warranty that’s supported by the strength and service expertise of one of the biggest dealer networks in the country. Simply have your engine serviced at an Authorised Service Centre at the recommended routine servicing/maintenance requirements set by Mercury Marine, and you’re covered by an additional 2-year factory backed warranty on top of the first 3 years. That’s a full 5 years of warranty coverage.

4

Mercury Innovation

Mercury Advantages

Mercury EFI technology

Mercury’s patented Electronic Fuel Injection (EFI) systems ensure quick starts and trouble-free operation – for clean, reliable, power & performance.

SmartCraft® digital diagnostics and instrumentation

Mercury’s leading-edge technology optimises engine performance and provides performance information to the helm.

The ultimate in durability

Our advanced powerheads feature the very latest in corrosion protection and multi-step painting processes.

Big time comfort Big time engineering

Mercury Marine has developed a tiller handle for high horsepower outboards, giving operators what they want – more room in the boat and simple hands-on control of their engine.

SmartCraft Digital Throttle & Shift (DTS)

Mercury’s unique system, provides digital precision to throttle & shifting – delivering immediate throttle and shifting response.

High-capacity charging

Our alternators deliver the best-in-class charging capacity – to ensure optimum power for quick starting, and to support Fishfinders, GPS plotters and other accessories.

Electronic precision & control

Powerful micro-processors control fuel injection and all engine functions, to optimise performance, fuel economy and low emissions in all operating conditions.

3-star Australian Emission Standards rating

Mercury Marine offers more 3-star rated outboards than any other manufacturer. Based on the Australian Voluntary Emissions Labelling Scheme (VELS). www.oeda.com.au

55

Mercury SmartCraftOnly Mercury Marine has SmartCraft. No one else can match the innovative and proven technologies that deliver a multitude of benefits to exponentially improve everything you do on the water.

Designed, engineered, tested, proven. That’s why it’s the best.

When SmartCraft was introduced the goal was simple. Make boating easier, giving you the right information at the right time. Mercury achieve this through the use of innovative digital technologies that are field-tested and proven to improve all aspects of the boating experience.

Mercury SmartCraft technology keeps you updated on all your critical engine functions and environment conditions.

Whether it’s Mercury’s ground-breaking Digital Throttle & Shift (DTS) that delivers immediate throttle and shifting response, or our VesselView® monitor which visually integrates all primary boating functions into one display, we continually strive to deliver on our promise to make the boating experience easier.

Mercury’s exclusive SmartCraft engine management system adjusts your engine to perform at its best, while providing continuous information directly to the helm. Whether your boat is rigged with SmartCraft gauges or you add them later, your Mercury dealer can help you select the system that is best suited to your needs.

Available on Mercury Verado, OptiMax, plus selected FourStroke and EFI TwoStroke engines. SmartCraft provides you with a full picture of your fuel consumption, range, remaining fuel and much more at the push of a button. You can even link SmartCraft to dedicated digital gauges.

Information delivery is a centrepiece of the SmartCraft network. SmartCraft gauges brings all your vessel’s information together onto one simple-to-navigate device giving you the vital information that you need to make good decisions on the water.

Now that’s smart thinking.

VesselView ®

From engine information to vessel systems, Mercury VesselView® – the premiere engine information display in the recreational marine industry – is your information portal to your boat. Mercury VesselView allows boaters to display up to 30 engine parameters, reduce fuel consumption with ECO screen, set launch, cruise or troll control and pair with other NMEA, Chart Plotter, Sonar and radar facilities.

MercMonitor featuring ECO-Screen

Would you like to get an increase in fuel economy? Mercury’s new ECO feature allows you to do just that!

ECO-Screen is a feature that tells you what you need to do, as a boater to obtain the best fuel economy for your application. The Eco feature is constantly monitoring engine RPM, boat speed, fuel consumption and engine trim to automatically calculate and guide you to your best fuel economy settings.

SC1000 - Better Boating Made Easy

Accurate digital information is presented in a clean, easy-to-read gauge for instant, reliable information at a glance. Combined with additional sensors, Mercury’s digital gauges are powerful tools to provide safety and comfort while on the water.

SC1000 - Tach & Speed

VesselView®

MercMonitor ECO-Screen

6

77

Awesome Power and Performance amazing out-of-hole and acceleration across the full rev range

Exclusive “fly-by-wire” Digital Throttle & Shift guarantees instant, silky-smooth gear shifts and throttle response

Maintenance Free Valve train for life, lowering cost of ownership

Exclusive SmartCraft digital engine management optimises performance and provides 64 streams of diagnostics to helm

The very latest in Steering our unique Electro-Hydraulic System provides car-like precision and feel (option on 4-cylinder models)

Outstanding fuel economy achieved through intelligent design and engineering

70amp alternators very-high output to ensure plenty of power for all marine electronics

Super quiet and super smooth with the lowest Noise/Vibration/Harshness (NVH) in the business

Backed by the only 3-year Corrosion Warranty based on Mercury Marine’s exclusive XK360 anti-corrosion alloy

Supported by the largest service network in Australia and New Zealand

A FourStroke engine that demands respect... Verado.

mercurymarine.com.aumercuryverado.com.au

8

6 C

YLIN

DE

R

When Mercury set out to engineer the perfect outboard, we questioned everything: every number, every scenario, every detail. The result? Verado®, the world’s most reliable and advanced propulsion system. Boating choices were once black and white: 4-stroke engines boasted advanced technology and reliability, but couldn’t equal the acceleration of traditional 2-strokes. Mercury, driven by a history of innovation, set out to manufacture a FourStroke engine that would deliver performance and reliability with an automotive-like driving experience. And we came up with Verado, the world’s first supercharged production outboard engine.

In 4 or 6 cylinder, Verado delivers an amazing driving experience, pleasantly quiet, virtually vibration free, they provide unequalled out of the hole performance, mid range acceleration and top speed - with style, comfort and reliability.

Pro Series FourStrokeIf you’re looking for a more advanced, refined, and enjoyable ride from a performance engine, you’ll love the Mercury 250hp and 300hp Pro FourStroke. Engineered to deliver the enhanced performance of other Mercury Pro series engines. With superior acceleration and higher top speeds these, FourStroke powerplants will get you to your fishing spot before everyone else.

250hp Pro300hp Pro 300hp 250hp 225hp 200hp

350hp SCi*

*2 year warranty on consumer engines. 20”(L) only available through authorised Mercury Racing Dealers.

9

4 C

YLIN

DE

R

Digital Throttle & Shift. Agility comes standard.Every Verado engine has Digital Throttle & Shift (DTS) as standard. DTS sends electronic signals from the controls to the engine and back, to give you smooth, precise gear shifts and lightning quick throttle response, just like you’d expect from a car. More reliable than standard throttle cables, which can be prone to stretching, kinking or fraying, DTS provides a dependable link between your helm controls and engine, meaning no throttle cable adjustments.

Advanced Midsection cradleVerado 6-cylinder models feature AMS – an Advanced MidSection cradle mount that surrounds the powerhead to virtually eliminate vibration while in motion. The mounting system also stiffens as thrust load increases to improve handling. This unique system has also been shown to generate more lift and better top speed performance.

Electro-hydraulic power for effortless steeringStandard on 6 cylinder and optional on 4 cylinder, electro-hydraulic steering operation on a Verado is so smooth, your arms will thank you for it. There’s no inconsistent steering system here, simply an effortless way to command your vessel, thanks to the electro-hydraulic power steering at your fingertips.

NEW Mercury Joystick Piloting for OutboardsTake the stress out of docking your outboard boat with Mercury’s new Joystick pilot system. Offering an incredible level of precise control, this system not only allows you to pivot the boat on its own axis, you can also make precise sideways movements without costly bow or stern thrusters. While Mercury’s Joystick pilot makes docking easy and enjoyable, you will find it handy at sea too. Equipped with Skyhook GPS anchoring, it will keep where you need to be regardless of the conditions.

Now available on twin, triple or quad 250hp and 300hp Verado powered vessels.

Superior Corrosion ProtectionSalt demands more. That’s why Mercury uses more stainless steel components than our competitors, as well as our exclusive low-copper XK360 aluminium alloy that provides industry-leading protection against saltwater corrosion.

In addition, the Verado supercharger features a marine-grade anodized aluminium housing and Teflon®-coated rotors. To top it all off, Verado is equipped with protective sacrificial anodes for superior protection at every level.

200hp 175hp 150hp 135hp

10

FourStroke

1111

Advanced power, commendable performance.

Mercury FourStroke have long led the pack in clean, quiet, fuel-efficient outboard power – and now the gap grows wider with…

Biggest range in the business Mercury offers the largest range of clean, smoke-free EFI FourStroke models

Mercury’s exclusive Electronic Fuel Injection (EFI) ensures instant turn key starts, great all-round performance, fuel efficiencies and reliability

Dependable engines backed up with thousands of hours of rigorous testing in Mercury’s state-of-the-art testing facility

Super smooth, quiet running designed for years of boating pleasure

High-Capacity charging alternators deliver the best-in-class charging capacity – to ensure optimum power for quick starting, and to support all your electronic requirements

Backed by the only 3-year Corrosion Warranty based on Mercury Marine’s exclusive XK360 Anti-Corrosion Warranty


mercurymarine.com.au

12

The most compact, lowest weight, most durable 150hp FourStroke outboard the world has ever seen. The innovation behind this 150hp FourStroke has come directly from you, our customer, after extensive feedback on our products and global surveys. We’ve delivered:

FourStroke Technology for maximum fuel economy and smoothness

Large Displacement for “out of the hole” performance

Compact and lowest weight design for better hull manoeuvrability

Fewer moving parts for less friction and greater reliability

Quiet operation making it easy to converse

More stainless steel for longevity

Best in class Battery “On-demand” charging system to ensure optimum power to all your electronic accessories

Highest displacement in its classHigher displacement means less work from the engine to produce torque and horsepower. More traditional 4-Strokes take twice as long to perform the same cylinder operations (intake, compression, ignition, and exhaust) as 2-Strokes do.

The Mercury 150hp FourStroke is built to develop loads of torque at a stress level that will ensure higher durability than any other 150 horsepower outboard. Higher displacement simply means more torque and horsepower. The Mercury 150hp FourStroke is the only 150hp FourStroke to have a torque curve rivalling the strongest 2-Strokes.

Compact designThe 150hp FourStroke weighs just 206kgs and has almost 20% fewer parts than the competition. A smaller compact design and a lighter weight reduces the overall package weight of the boat, which, depending on the hull, will improve performance and efficiency.

Maintenance-free valve trainUnlike many competitors’ 4-Strokes, Mercury’s durable valve train stays maintenance-free for life, lowering cost of ownership and giving you more time in the water. It features the race proven “Roller Finger Followers” and oversized valves, offering a more reliable, more efficient, power design.

FourStroke

150hp EFI

13

100hp EFI 75hp EFI80hp EFI90hp EFI

FourStroke Mid RangeEvery 115-75hp is built to run quiet and smooth, delivering long term, reliable performance you can depend on. Our fully filtered air intakes protect internal engine components from potentially damaging dust and sand, while our advanced anti-drain-back oil system assures instant lubrication on start-up. More stainless steel, hard anodizing, and our exclusive multi-step paint process add up to superior corrosion resistance.

All together, these elements combine to provide the engine security you not only crave, but deserve. That’s because every component on our FourStrokes are designed to deliver ultimate durability.

Maintenance-free Valve TrainThe 115-75hp FourStroke models feature the same valve train architecture as Verado – a robust design that is incredibly durable and maintenance-free for life.

115hp EFI

14

FourStroke

50hp EFI 40hp EFI

Powerfully Compact There’s a reason why Mercury 60-40hp EFI FourStroke Outboards are so popular – they do exactly what you need them to, hassle free. So reliable and easy to operate, they’re the last thing you have to worry about on the water. The single-overhead-cam configuration and long-stroke design of Mercury 60-40hp FourStroke engines increases torque for excellent acceleration, even with heavy loads. Additionally, the compact design coupled with a high-output alternator makes them exceptionally desirable.

60hp EFI

15

60hp BF BT 40hp EFI50hp EFI

BigFootHouseboats, pontoons or heavy vessels are unique; they sit high above the water and are hydro-dynamically different from other boats. In response to those and other challenges, Mercury developed BigFoot, the industry’s first outboard engine made specifically for houseboats, pontoons or heavy vessels.

BigFoot engines are built with a taller, heavy-duty gear case, larger gears and shafts (up to 33% larger than standard outboards) and that places the propeller deeper in the water dramatically improving performance by being able to run a larger propeller. The BigFoot’s propeller has up to 20 percent more surface area than the standard propeller, providing more working surface for greater overall thrust, acceleration and manoeuvrability.

60hp EFI

Superior corrosion protectionMercury FourStrokes deliver powerful saltwater protection by using more stainless steel components, hard anodizing, engineered polymers and exclusive multi-step painting and coating processes. Saltwater maintenance is made easy in the 150-40hp models with the innovative Freshwater Flushing System and... only Mercury Marine offers a 3-year limited corrosion failure warranty.

Peace of mindEngine Guardian uses more than 40 sensors to monitor functions of your engine. If the proactive operator-warning system detects a potential problem – such as over-revving, overheating or low oil pressure – Engine Guardian sends out an alert and automatically reduces engine power to prevent damage.

16

Unlike the rest.With models ranging from 30hp to 2.5hp, Mercury FourStrokes provide perfect fuel efficient power to everything from small inflatables to aluminium dinghies and punts. The 9.9hp BigFoot is purposely designed to push a heavier vessel or add a Pro Kicker for the perfect auxiliary with power tilt and electric start. Mercury FourStrokes are designed with leading edge features for enhanced reliability and performance. Starting is a breeze thanks to a fast idle and fuel primer system, and once the engine’s running you’ll hardly notice due to the noise-reducing cowls, air intake silencers and through prop exhaust.

3+2=5 year warrantyPurchase any Mercury Outboard from an authorised Mercury Dealer in Australia or New Zealand and you’ll receive a 3+2=5 year factory warranty. Plus you’ll be covered by the industry’s only 3 year corrosion warranty.

25hp 20hp 15hp 15hp PK

FourStroke

30hp

17

Fully loadedWhen it comes to unique standard features, the competition can’t match Mercury FourStroke. From 30hp down to 8hp, our full-featured engines are easy to handle.n Multi-function tiller handle controls shifting, stopping, steering, throttle and tilt, all with just one hand

n Easy to use steering co-pilot provides additional steering control & safety and is easily adjusted by hand

n Multiple trim positions plus shallow-water drive provide maximum performance no matter what depth you operate in

n With standard manual recoil, you’ll have peace of mind knowing that you can start the engine even if the battery is low

n Exclusive dual-water intakes provide a constant supply of cooling water to provide durability

n Backed by the industry’s only 3 year corrosion warrantyn Supported by the largest service network throughout Australia and New Zealand

Multi-function tiller handle Offers one-hand operation and total control over shifting, throttle, steering, engine stop, throttle friction and tilting. Available on 30, 25, 20, 15, 9.9 and 8hp models.

9.9hp 9.9hp PK 9.9hp BF 8hp 4hp5hp 3.5hp 2.5hp

Tilt Up

Tilt Down

ReverseEngine Stop

Forward

6hp

18

1919

The world’s best selling Direct-injected outboard… OptiMax

It’s a global best seller:Best “power-to-weight” performance lightweight, great out-of-hole acceleration and best top speed

Low-pressure Direct-Fuel-Injection (DFI) = less stress on components, greater reliability over life of engine

Uses up to 45% less fuel than traditional 2-strokes... with turn-key easy starting and no smoke!

Exclusive SmartCraft digital engine management optimises performance and provides 64 streams of diagnostics to helm

60amp alternator best-in-class power, for your marine electronics

Features Mercury’s exclusive XK360 marine alloy which provides superior corrosion resistance

Built-in freshwater flushing system no separate “ear muffs” attachment needed

Electronic precision & control powerful Motorola processor, monitors 64 functions – includes Engine Guardian™ Protection System

Backed by the only 3-year Corrosion Warranty


mercurymarine.com.autruthisproof.com.au

20

Over 70 years of the world’s best marine engineering, build and innovation; a heritage of leading edge technology, performance, fuel economy and reliability; standards that surpass all industry and consumer expectations. OptiMax. The truth behind the world’s best selling direct-injected outboard.

Professionals insist on OptiMax ProXSOptiMax ProXS was designed to rule the water, taping into Mercury’s tradition of speed, power and durability. Featuring Carbon Fibre Reeds to control airflow into the engine crankcase, and dome-Shaped Piston Heads to direct the fuel-and-air charge to the spark plug more efficiently, the ProXS offers even better performance at Wide-Open-Throttle. Available in 250hp, 225hp, 200hp, 175hp, 150hp and 115hp. The OptiMax ProXS doesn’t have to make performance claims, it sets the standards by which all others follow.

225hp ProXS 200hp ProXS

250hp ProXS

21

Powerful and smoothThe OptiMax low pressure Two-Stage Direct Injection System produces consistent performance and unmatched throttle response by providing a constant supply of atomised fuel and air.

Light and fastThe compact 60-degree V6 block combines the smooth-running characteristics of a powerful V6 engine with a slim, lightweight design, making it a great choice for almost any type of boat. It consistently outperforms other direct injection engines in holeshot, mid-range acceleration and top-end speed.

175hp ProXS 150hp ProXS 115hp ProXS

Run with the prosThe tournament-tested Mercury ProXS line up is the choice of thousands of performance-minded anglers. Only OptiMax ProXS engines feature durable and responsive Carbon Fibre Reeds to control airflow into the engine crankcase, while dome-shaped piston heads direct the fuel-and-air charge to the spark plug more efficiently. This results in amazing power, outstanding durability, and excellent running quality.

22

The world’s best selling Direct-Injected Outboard. Save time and money getting to your favourite spot.Nothing beats a day on your boat when you know it’s powered by the perfect engine. OptiMax is outfitted with innovative features designed to let you enjoy every available minute – features like its two-stage low pressure direct injected fuel system, ultra-reliable components and “smart” electronics that give you confidence to go as far as you like.

225hp 200hp

250hp

23

Powerful and smoothThe OptiMax low pressure Two-Stage Direct Injection System provides a constant supply of atomized fuel and air while the Vapor Separator Tank (VST) ensures a constant supply of liquid fuel for the injection process. The result is unmatched throttle response, instant starting, and smooth performance.

Superior durabilityOptiMax’s durable gearcase features a heavy-duty prop shaft and Mercury-patented dual water pickups on the front end of the torpedo for a constant flow of cooling water. It is specifically designed to give you impeccable handling and incredible top speeds. Dome-shaped piston heads direct the fuel-and-air charge to the spark plug more efficiently, providing outstanding durability along with excellent running quality.

125hp 115hp 90hp 75hp

Long-lasting stainlessOptiMax is built with more stainless steel and corrosion-resistant components, which translates to saltwater durability, longer intervals between maintenance, and lower cost of ownership. In addition, our low pressure direct injection system also provides superior component durability and longevity.

Leading gearcase technologyNo other marine engine company has more knowledge about hydrodynamics and gearcase design. Mercury has the right gearcase configuration and technology to match any boating application. Mercury’s designs result in less drag – giving you better handling and performance.

24

TwoStroke

2525

Proven reliability of TwoStroke power.

Mercury’s proven TwoStroke engines deliver easy starting, gutsy performance, and great all-round reliability… Across the range you’ll find an array of features that help keep your boating experiences more enjoyable and trouble-free. Features such as:

Largest engine capacity displacement in their horsepower category, giving you more low-end thrust

Capacitor Discharge Ignition (CDI) for quicker, hassle-free starts and better all-round performance

Advanced carburettor design ensures highly-efficient air/fuel mixing

Variable-ratio oil injection system reduces oil consumption at idle speed and improves operating efficiency

Dual water pickups provide added protection against over-heating – especially when navigating shallow or weed-filled waters

Audible low-oil and overheating warning system for added peace of mind

Features Mercury’s exclusive XK360 marine alloy which provides superior corrosion resistance

Fully-regulated, high output alternator powers all your marine electronics

Backed by the only 3-year Corrosion Warranty based on Mercury Marine’s exclusive XK360 anti-corrosion alloy


mercurymarine.com.au

26

V6 EFI TwoStrokes. V6 grunt meets EFI refinement.

Both Mercury 200hp and 150hp V6 EFI TwoStrokes deliver fast acceleration and smooth, reliable operation. Plus with the added power of 2.5 litre ‘big block’ engines, you know you have what it takes to move larger vessels with ease. The powerhead design is a slim 60º V6 that is ideal for twin-rig installations.

150hp

200hp

TwoStroke

27

The mid-range TwoStroke. One smooth operator.From 90hp to 40hp, Mercury’s mid-range TwoStrokes deliver startling reliability, not to mention gutsy performance. The secret to our mid-range’s renowned reliability is thanks to its cool running. With high volume and low pressure, floppy-vane water impellers keep operating conditions down. Other enhancements include single point, variable-ratio oil injection on electric start motors that automatically mix correct oil/fuel combinations.

What you need, when you need it.We’ve taken a no-nonsense approach to the engineering department, and it shows. With valuable features like variable-ratio oil injection to reduce oil consumption and provide smoke-free running, instant turn-key starting, and exclusive SmartCraft digital engine management. SmartCraft optimises your engine as it runs, providing all the vital diagnostics you need to the helm. Other handy items include 60amp alternators, Electronic Motorola® processed monitoring, corrosion resistant XK360 alloy and more.

60hp 60hp BF

50hp 40hp2cyl

40hpLW

Backed by the bestThe entire Mercury TwoStroke range is backed by an exclusive 3+2=5 year warranty, as well as 3 year Corrosion Warranty. Plus we support this commitment with the largest service network that stretches across Australia and New Zealand.

90hp 75hp

28

Whether you’re a fisherman, a yachtie or looking to run a smaller leisure vessel – Mercury’s range of portable TwoStrokes provide the power that can go anywhere and keep on going.

Portable TwoStroke Engines, eleven great choices.With eleven horsepower options ranging from 30hp to 2.5hp, Mercury have the portable power that you can carry, run and depend on. We also offer a 15hp Super model that holds a larger capacity engine than standard – ideal for when you’ve got to move a heavier load.

25hp Sea Pro

15hpSUPER

15hp

30hp LW

TwoStroke

29

10 good reasons to consider a portable TwoStrokeWhen looking at portables, ask yourself if they can deliver what Mercury can. Mercury offer portable TwoStroke engines that:

1. Are lightweight & powerful

2. Starts easily with capacitor Discharge Electronic Ignition

3. Offer variable engine trim positions for various conditions

4. Are portable and easy to handle with carrying handles and grips

5. Large displacement powerhead for performance and efficiency

6. Are covered by a comprehensive 3+2=5 year warranty

7. Are backed by a 3-year anti-corrosion warranty

8. Are part of the widest choice of portable power in the industry

9. Are available with steering Co-Pilot, an additional steering control

10. Support from the largest network of Specialist Marine Dealers in Australia and New Zealand.

9.9hp 8hp 6hp 5hp 4hp 2.5hp3.3hp

Multi-function tiller handle Offers one-hand operation and total control over shifting, throttle, steering, engine stop, throttle friction and tilting. Available on 15hp and 9.9hp models.

Tilt Up

Tilt Down

ReverseEngine Stop

Forward

30

Propellers

Mercury Propellers. The right way forward.Next to your engine, your propeller is the single most important factor in how your boat performs. It affects:

> Handling > Engine Life > Speed> Acceleration > Fuel Economy > Safety

Mercury is the world’s largest propeller designer and manufacturer with over 700 propellers in our range. Designed to fit all manufacturers’ engines, we have the best props for every application, from custom racing to 2.5hp portables. Mercury propellers are proven for superior strength, and all-round performance. Speak to your dealer about the right propeller for your needs or use our online propeller selector at www.mercurymarine.com.au/home/propeller-selector

SpitfireUp to 25% faster from 0-32kph with no penalty in top speed, our new four blade aluminium propeller provides tenacious holding that will keep you on the plane even during tight turns. Available in 11” to 19” pitch.

VengeanceBetter acceleration and handling, built to be 5 times more durable. This quality stainless steel propeller is available for use in either rotation with pitches from 9” to 23”.

Laser IIIdeal for fast and light running, the Laser II has thin blades for low drag and higher speed. Available in both rotations with 19” to 26” pitch.

Trophy PlusThe Trophy Plus delivers remarkable bow lift, quick planing and better handling, and is ideally suited to outboard applications such as runabouts and ski boats. A four blade propeller with 17” to 28” pitch, the Trophy Plus can be used on outboards 75hp and up.

Trophy SportA compact 4 bladed propeller in 12” and 15” pitch, the Trophy Sport offers fast planing, top speeds, improved handling and reduced steering loads. Specifically designed for outboards 30-60hp, that run between 50-100kph.

Tempest PlusThe Tempest is ventilated for increased acceleration with a higher rake and better handling lift. Designed in 13” to 29” pitch, it has a larger diameter for big transom weights and is suited to large outboards.

Enertia/FuryCast with exclusive new X7 alloy, the Enertia/Fury has incredibly thin blades and higher rake angles to deliver higher acceleration and top speed. It’s the ultimate for high horsepower outboard-powered boats. Available in 14” to 27” pitch.

Mirage PlusA propeller built strong enough to handle your high horsepower demands. With a large diameter and high-output blade geometry, it is ideal for heavier outboards and sterndrives and comes in 13” to 29” pitch.

VensuraSuited to twin outboard vessels, the Vensura provides outstanding lift even in rough seas. Fashioned in high gloss stainless steel, and designed in 17” to 23” pitch, they can be used in offshore or sports boat applications.

Revolution 4You need a Revolution to achieve better performance in sterndrives or big outboard sports boats. Put this propeller on and watch your mid-range acceleration and top speed dramatically improve. With a large stainless steel design in 15” to 25” pitch.

HighfiveCuts the water with an innovative 5 blade system for smooth acceleration and effortless ski-pull. You can use the Highfive on both outboards and sterndrives, and it is available in 17” to 25” pitch.

3131

BigTillerBig time comfort. Big deal engineering.

Mercury Marine’s new “big” tiller handle gives fishermen and commercial operators just what they want – more room in the boat and simple hands-on control of their engine.

This ergonomically-friendly big tiller is a joy to use, with integrated shift, trim and throttle controls.

User-friendly adjustment knobs allow for easy modification of the tiller handle angle, throttle handle and valve tension – and operating it is a breeze thanks to the proximity of the shift arm to the throttle end of the tiller.

Created specifically for high horsepower Mercury outboard engines, the handle adapts to:

> 150hp to 40hp EFI FourStroke

> 250hp to 75hp OptiMax engines

> 200hp to 135hp four-cylinder Verado engines with SmartCraft Digital Throttle & Shift (DTS)

Available options include external trim switches, such as foot trims; and push-button RPM adjuster which means better control and manoeuvrability; and power steering on some models.

Mercury Oils and LubricantsAs perfect as the engine they go into.

Mercury Oils and Lubricants are specifically engineered for the unique needs of marine engines and rigorously tested to meet our high standards. So you can get the most out of your engine while having total peace of mind that your engine is being protected. Exactly what you should expect from the only marine engine manufacturer 100% focused on the marine industry for over 70 years.

32

350** 6-cylinder

300 6-cylinder

300Pro 6-cylinder

250 6-cylinder

250Pro 6-cylinder

225 6-cylinder

200 6-cylinder

200LW 4-cylinder

175 4-cylinder

150 4-cylinder

135 4-cylinder

Propshaft Rated Horsepower

350hp (261kW)

300hp (224kW)

300hp (224kW)

250hp (186kW)

250hp (184kW)

225hp (168kW)

200hp (149kW)

200hp (149kW)

175hp (130kW)

150hp (112kW)

135hp (101kW)

Max RPM at Full Throttle 6200 – 6800 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400 5800 – 6400

Cylinders/Configuration

In-line 6, 24-valve, double overhead cam











Displacement 2.6 litres (2598cc)

2.6 litres (2598cc)

2.6 litres (2598cc)

2.6 litres (2598cc)

2.6 litres (2598cc)

2.6 litres (2598cc)

2.6 litres (2598cc)

1.7 litres (1732cc)

1.7 litres (1732cc)

1.7 litres (1732cc)

1.7 litres (1732cc)

Induction System

Supercharged with charge air cooling

and electronic boost pressure control





















Fuel System Computer-controlled multi-port EFI

Computer-controlled multi-port EFI

Electronic Fuel Injection (EFI)


Electronic Fuel Injection (EFI)







Fuel Requirements

Refer owners manual

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Unleaded regular†

Charging System Fully regulated belt-driven 70-amp

Fully regulated belt-driven 70-amp










Cooling SystemWater-cooled

with thermostat & pressure control

Water-cooled with thermostat & pressure control










Lubrication System Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Integrated dry sump

Oil Requirement NMMA®-certified FCW SAE 25W-50

NMMA®-certified FCW SAE 25W-50










Engine Management & Ignition System

SmartCraft® PCM 07 SmartCraft® PCM 07 SmartCraft® PCM SmartCraft® PCM 07 SmartCraft® PCM SmartCraft® PCM 07 SmartCraft® PCM 07 SmartCraft® PCM 07 SmartCraft® PCM 07 SmartCraft® PCM 07 SmartCraft® PCM 07

Engine Control & Gear Shift

SmartCraft® Digital Throttle & Shift (DTS)











Engine Protection System

SmartCraft® Engine Guardian











Gear Ratio 1.75:1 1.85:1 1.75:1 1.85:1 1.85:1 1.85:1 1.85:1 2.08:1 2.08:1 2.08:1 2.08:1

Driveshaft Lengths20” (L) CR

25” (XL) CR 30” (XXL) CR

20” (L) CR 25” (XL) CR

30” (XXL) CR

20” (L) 25” (XL)

20” (L) 25” (XL) CR

30” (XXL) CR

20” (L) 25” (XL)

20” (L) 25” (XL) CR

30” (XXL) CR

20” (L) 25” (XL) CR

30” (XXL) CR

20” (L) 25” (XL) CR

20” (L) 25” (XL) CR

20” (L) 25” (XL) CR

20” (L) 25” (XL) CR

Trim/Tilt SystemSmartCraft-

programmable power trim and tilt

SmartCraft- programmable power

trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt


trim and tilt

Steering System

Electro hydraulic power steering with integral

hydraulic cylinder


hydraulic cylinder


hydraulic cylinder


hydraulic cylinder


hydraulic cylinder


hydraulic cylinder


hydraulic cylinder

Big Tiller, hydraulic or optional electro hydraulic

power steering


power steering


power steering


power steering

Comparative Weight (kg)* 20” (L)

300kg 294kg 288kg 294kg 288kg 294kg 294kg 231kg 231kg 231kg 231kg

SmartCraft Capabilities











150 EFI

115 EFI


150hp (110kW)

115hp (86kW)

Max. RPM at Full Throttle 5000-6000 5800-6400

Cylinders 4 4

Displace-ment

183 cu in (3000cc)

105.7 cu in (1732cc)

Bore/Stroke 102mm x92mm

82mm x 82mm

Cooling System

Water- cooled, w/ thermostat


Ignition

Smartcraft-ECM

Digital Inductive

ECM Digital

Inductive

Starting Electric Electric

Gear Ratio 1.92:1 2.33:1

Gear Shift F-N-R F-N-R

Steering Remote or Tiller option^

Remote or Tiller option^

Alternator System 60amp 50amp

Trim Positions

Power trim & tilt

Power trim & tilt

Fuel Tank Separate Optional

Weight 1 206kg 181kg

Shaft Length

20” (L) 25” (XL) CR

20” (L) 25” (XL)

Propeller Drive

Consult Dealer Flo-Torque II

Prop Selection (Pitch) 3

11”- 36” 9”- 28”

Induction System

Perfor-mance -

Tuned scroll intake

manifold

16-valve dou-ble overhead cam design

/ EFI



*Comparative weight refers to base engine without oil, propeller or integral steering cylinder. **Only available through authorised Mercury Racing Dealers. †Premium Unleaded recommended for maximum performance under all operating conditions. ^Big Tiller option available.

Mercury Verado® Supercharged FourStrokesMercury FourStrokes

3333

100 EFI

90 EFI

80 EFI

75 EFI

60 EFI BigFoot

60 EFI BigFoot BigTiller

60 EFI 50 EFI

50 EFI BigFoot

40 EFI BigFoot

40 EFI 30 EFI

25 EFI

20 15 Pro Kicker

15 9.9 Pro Kicker

9.9 9.9

BigFoot

8 6 5 4 3.5 2.5

100hp 90hp (67kW) 80hp 75hp

(56kW)60hp

(45kW)60hp

(45kW)60hp

(45kW)50hp

(37kW)40hp

(30kW)40hp

(30kW)30hp

(22.4kW)25hp

(18.6kW)20hp

(14.7kW)15hp

(11.1kW)15hp

(11.1kW)9.9hp

(7.3kW)9.9hp

(7.3kW)8hp

(5.9kW)6hp

(4.4kW)5hp

(3.7kW)4hp

(3kW)3.5hp

(2.6kW)2.5hp

(1.9kW)

5000-6000 5000-6000 5000-6000 5500-6000 5500-6000 5500-6000 5500-6000 5500-6000 5500-6000 5500-6000 5250-6250 5000-6000 5400-6100 5000-6000 5000-6000 5000-6000 5000-6000 5000-6000 5000-6000 4500-5500 4500-5500 5000-6000 4500-5500

4 4 4 4 4 4 4 4 4 3 3 3 2 2 2 2 2 2 1 1 1 1 1

105.7 cu in (1732cc)

105.7 cu in (1732cc)

105.7 cu in (1732cc)

105.7 cu in (1732cc)

60.8 cu in (995cc)

60.8 cu in (995cc)

60.8 cu in (995cc)

60.8 cu in (995cc)

60.8 cu in (995cc)

45.6 cu in (747cc)

32 cu in (526cc)

32 cu in (526cc)

21.4 cu in (351cc)

21.4 cu in (351cc)

21.4 cu in (351cc)

12.75 cu in (209cc)

12.75 cu in (209cc)

12.75 cu in (209cc)

7.5 cu in (123cc)

7.5 cu in (123cc)

7.5 cu in (123cc)

5.2 cu in (85cc)

5.2 cu in (85cc)

82mm x 82mm

82mm x 82mm

82mm x 82mm

82mm x 82mm

65mm x 75mm

65mm x 75mm

65mm x 75mm

65mm x 75mm

65mm x 75mm

65mm x 75mm

61mm x 60mm

61mm x 60mm

61mm x 60mm

61mm x 60mm

61mm x 60mm

55mm x 44mm

55mm x 44mm

55mm x 44mm

59mm x 45mm

59mm x 45mm

59mm x 45mm

55mm x 36mm

55mm x 36mm

Wa-ter-cooled, w/ thermostat




Water-cooled, w/ thermostat












Water- cooled w/

thermostat

Water- cooled w/

thermostat

Water- cooled w/

thermostat

Water- cooled w/

thermostat

Water- cooled w/

thermostat

Water- cooled w/

thermostat

Water- cooled w/

thermostat

ECM Digital

Inductive

ECM Digital

Inductive

ECM Digital

Inductive

ECM Digital

Inductive

ECM Digital Inductive



ECM Digital

Inductive

ECM Digital

Inductive

ECM Digital

Inductive

CDI w/elec-tric spark advance













Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Manual or electric

Manual or electric

Manual or electric Electric Manual or

electric Electric Manual or electric Manual Manual Manual Manual Manual Manual

2.33:1 2.33:1 2.33:1 2.33:1 2.33:1 2.33:1 1.83:11.83:1 2.33:1

(BigFoot)2.33:1 2.00:1 1.92:1 1.92:1 2.15:1 2.15:1 2.15:1 2.42:1

2.08:1 2.42:1

(BigFoot)2.08:1 2.15:1 2.15:1 2.15:1 2.15:1 2.15:1

F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N F-N




Remote or Tiller option^ Remote BigTiller Remote or

Tiller option^Remote or



Tiller option^

Tiller - shift in handle or

Remote


Remote


Remote


Remote


Remote


Remote


Remote

Tiller - shift in handle

Tiller - side shift

Tiller - side shift

Tiller - side shift

Tiller - side shift 360º Tiller 360º

50amp 50amp 50amp 50amp 18amp 18amp 18amp 18amp 18amp 18amp 15amp 15amp 12amp 12amp 12amp 6amp on Electric Models

6amp on Electric Models

N/A N/A Optional 4amp N/A N/A N/A

Power trim & tilt

Power trim & tilt

Power trim & tilt

Power trim & tilt

Power Trim & Tilt Gas Assist Power trim

& tiltPower trim

& tiltPower trim

& tiltGas assist or power trim & tilt

Gas assist or power trim & tilt

Power trim or manual 6 Power trim

standard6 with auto ratchet tilt Power Tilt 5 with

auto ratchet5 with

auto ratchet 6 6 6 4 4

Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Separate 25 litres

Separate 25 litres

Separate 25 litres

Separate 25 litres

Separate 25 litres 12 litres 12 litres 12 litres Integral Tank Integral Tank Integral Tank Integral Tank Integral Tank

181kg 181kg 181kg 181kg 118kg 118kg 112kg 112kg EFI 118kg BF 118kg 98kg 78kg 71kg 52kg 62kg 52kg 49kg 38kg

44kg BF 38kg 26kg 26kg 26kg 17kg 17kg

20” (L) 25” (XL)

20” (L) 25” (XL) 20” (L) 20” (L) 20" (L),

25" (XL) 20" (L) 20” (L) 20” (L) 20” (L) 15” (M) 20” (L)

15” (M) 20” (L)

15” (M) 20” (L)

15” (M) 20” (L)

20” (L) 25” (XL)

15” (M) 20” (L)

20” (L) 25” (XL)

15” (M) 20” (L)

25” (XL) BigFoot Model

20” (L) 25” (XL)

15” (M) 20” (L)

15” (M) 20” (L)

15” (M) 20” (L)

25” (XL)

15” (M) 20” (L)

15” (M) 20” (L) 15” (M)

Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Flo-Torque II Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub Composite Composite

9”- 28” 9”- 28” 9”- 28” 9”- 28” 9”-28” 9”-28” 8”-19” 8”-19”9”-28” BF 9”-28” BF 8”-19” 8”-12.5” 8”-12.5” 5”-11.5” 5”-11.5” 5”-11.5” 5”-11.5” 6.5” - 9.5”

5”-11.5” BF 6.5” - 9.5” 6”-9” 6”-9” 6”-9” 6”-7” 6”-7”


/ EFI


/ EFI


/ EFI


/ EFI

2-valve single overhead

cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design


cam design

Overhead 2-valve pushrod















150 EFI

115 EFI


150hp (110kW)

115hp (86kW)

Max. RPM at Full Throttle 5000-6000 5800-6400

Cylinders 4 4

Displace-ment

183 cu in (3000cc)

105.7 cu in (1732cc)

Bore/Stroke 102mm x92mm

82mm x 82mm

Cooling System



Ignition

Smartcraft-ECM

Digital Inductive

ECM Digital

Inductive

Starting Electric Electric

Gear Ratio 1.92:1 2.33:1

Gear Shift F-N-R F-N-R



Alternator System 60amp 50amp

Trim Positions

Power trim & tilt

Power trim & tilt

Fuel Tank Separate Optional

Weight 1 206kg 181kg

Shaft Length

20” (L) 25” (XL) CR

20” (L) 25” (XL)

Propeller Drive

Consult Dealer Flo-Torque II

Prop Selection (Pitch) 3

11”- 36” 9”- 28”

Induction System

Perfor-mance -

Tuned scroll intake

manifold


/ EFI



*Comparative weight refers to base engine without oil, propeller or integral steering cylinder. ^Big Tiller option available.

Mercury FourStrokes

34

250 ProXS

225 ProXS

200 ProXS

175 ProXS

150 ProXS

115 ProXS 250 225 200 125 115 90 75


250hp (186kW)

225hp (165kW)

200hp (147kW)

175hp (130kW)

150hp (110kW)

115hp (84.5kW)

250hp (186kW)

225hp (165kW)

200hp (147kW)

125hp (93.21kW)

115hp (84.5kW)

90hp (66.2kW)

75hp (55.1kW)

Max. RPM at Full Throttle 5500-6000 5500-6000 5000-5750 5500-6000 5250-5750 5500-5750 5250-5750 5000-5750 5000-5750 5000-5750 5000-5750 5000-5750 5000-5750

Cylinders V-6 (60° vee)

V-6 (60° vee)

V-6 (60° vee)

V-6 (60° vee)

V-6 (60° vee) 3 (in-line) V-6

(60° vee)V-6

(60° vee)V-6

(60° vee) 3 3 3 3

Displacement 185.9 cu in (3032cc)

185.9 cu in (3032cc)

185.9 cu in (3032cc)

153 cu in (2507cc)

153 cu in (2507cc)

92.96 cu in (1526cc)

185.9 cu in (3032cc)

185.9 cu in (3032cc)

185.9 cu in (3032cc)

92.9 cu in (1526cc)

92.9 cu in (1526cc)

92.9 cu in (1526cc)

92.9 cu in (1526cc)

Bore/Stroke 92mm x 76mm

92mm x 76mm

92mm x 76mm

89mm x 67mm

89mm x 67mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

92mm x 76mm

Cooling System


& pressure controlled

















Water-cooled w/thermostat & pressure controlled




Engine Management & Ignition System

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

SmartCraft PCM 07

Starting Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric Electric

Gear Ratio 1.75:1 1.75:1 1.75:1 1.87:1 1.87:1 2.07:1 1.75:1 1.75:1 1.75:1 2.07:1 2.07:1 2.33:1 2.33:1

Gear Shift F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R














Alternator System Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp Belt-driven 60amp

Trim Positions Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard

Weight 1 229kg 229kg 225kg 195kg 195kg 170kg 229kg 225kg 225kg 170kg 170kg 170kg 170kg

Shaft Length 20” (L) 25” (XL)

20” (L) 25” (XL)

20” (L) 25” (XL)

20” (L) 25” (XL) (CR)

20” (L) 25” (XL) (CR)

20” (L) 25” (XL)

25” (XL) (CR) 30” (XXL) (CR)

20” (L) 25” (XL) (CR)

30” (XXL) (CR)

20” (L) 25” (XL) (CR)

20” (L) 25” (XL)

20” (L) 25” (XL)

20” (L) 25” (XL) 20” (L)

Propeller Drive Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II

Prop Selection (Pitch) 3 11”-36” 11”-36” 11”-36” 11”-36” 11”-36” 9”- 28”” 11”-36” 11”-36” 11”-36” 9”- 28”” 9”- 28”” 9”- 28” 9”- 28””

Induction System 2-Stage Direct fuel injection

2-Stage Direct fuel injection



2-Stage Direct fuel

injection









Oil Injection Electronic Multipoint

Electronic Multipoint








Electronic multipoint

















Mercury OptiMax® Direct Injection

3535

200 EFI

150 EFI

90 75 60 60 BigFoot

60 Sea Pro

55Sea Pro

50 40 (2-CYL)

40 LW

30 LW

25 SeaPro

15 SUPER

15 9.9 8LW

6LW

5 4 3.3 2.5


200hp (149kW)

150hp (112kW) 90hp (67kW) 75hp (56kW) 60hp

(44.8kW)60hp

(44.8kW)50hp

(41.1kW)50hp

(37.3kW)40hp

(29.8kW)40hp

(29.4kW)30hp

(22.5kW)25hp

(18.4kW)15hp

(11.4kW)15hp

(11.2kW)9.9hp

(7.4kW) 8hp (6kW) 6hp (4.5kW) 5hp (3.7kW) 4hp (3kW) 3.3hp (2.5kW)

2.5hp (1.9kW)

Max. RPM at Full Throttle 5000-5800 5000-6000 5000-5500 4750-5250 5000-5500 5000-5500 5000-5500 5000-5500 4500-5000 5000-5700 4750-5500 4750-5500 4750-5500 5000-6000 5000-6000 4500-5500 4500-5500 4000-5000 4500-5500 4500-5500 4200-5200

Cylinders V-6 (60° vee) V-6 (60° vee) 3 3 3 3 3 3 2 3 2 2 2 2 2 2 2 1 1 1 1

Displacement 153 cu in (2507cc)

153 cu in (2507cc)

84.6 cu in (1386cc)

84.6 cu in (1386cc)

59 cu in (967cc)

59 cu in (967cc)

60 cu in (967cc)

59 cu in (967cc)

39.3 cu in (644cc)

42.5 cu in (697cc)

26.3 cu in (430cc)

26.3 cu in (430cc)

17.9 cu in (294cc)

16 cu in (262cc)

16 cu in (262cc)

10.3 cu in (169cc)

10.3 cu in (169cc)

6.2 cu in (102cc)

6.2 cu in (102cc)

4.6 cu in (74.6cc)

4.6 cu in (74.6cc)

Bore/Stroke 89mm x 67mm

89mm x 67mm

89mm x 75mm

89mm x 75mm

76mm x 71mm

76mm x 71mm

76mm x 71mm

76mm x 71mm

76mm x 71mm

68mm x 64mm

68mm x 59mm

68mm x 59mm

60mm x 52mm

60mm x 46mm

60mm x 46mm

50mm x 43mm

50mm x 43mm

55mm x 43mm

55mm x 43mm

47mm x 43mm

47mm x 43mm

Cooling System

Wa-ter-cooled, w/ thermostat & pressure controlled











Water-cooled w/ thermo-

stat



Water-cooled, w/thermostat



Water-cooled Water-cooled Water-cooled Water-cooled

IgnitionCDI w/

electronic control (ECM)

CDI w/ electronic

control (ECM)Modular CDI Modular CDI Modular CDI Modular CDI Modular CDI Modular CDI Modular CDI Modular CDI Capacitor

dischargeCapacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Capacitor discharge

Starting Electric Electric Electric Electric Electric Manual Manual Electric Electric ManualManual or electric/manual

Manual Manual Manual Manual Manual Manual Manual Manual Manual Manual

Gear Ratio 1.87:1 1.87:1 2.33:1 2.33:11.64:1 2.33:1

(BigFoot) 2.30:1 1.64:1 1.83:1 2.00:1 1.85:1 1.92:1 1.92:1 1.84:1 2.00:1 2.00:1 2.08:1 2.08:1 2.15:1 2.15:1 2.15:1 1.85:1

Gear Shift F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N-R F-N F-N

Steering Remote Remote Remote Remote Remote Tiller - side shift

Tiller - side shift

Tiller - side shift or Remote

Remote or Opt Tiller

Tiller - side shift

Tiller - side shift or Remote

Tiller - side shift

Tiller - side shift



Tiller - side shift

Tiller - side shift

Tiller - side shift

Tiller - side shift

Tiller - side shift 360º Tiller - 360º

Alternator System

60amp w/ dual voltage

regulators

60amp w/ dual voltage

regulators

18amp w/ voltage regulator

18amp w/ voltage regulator

16amp w/voltage

regulator elec. start;10amp manual start

18amp 18amp

16amp w/volt-age regulator

elec. start;10amp manual start

18amp 11amp

Standard: electric

Optional: manual 6amp

Standard: electric


Standard: electric


Standard: electric


Standard: electric


Optional 6amp

Optional 4amp

Optional 4amp

Optional 4amp N/A N/A

Trim Positions Power trim standard

Power trim standard

Power trim standard

Power trim standard

Power trim standard Gas assist Gas assist

Power trim (ELPTO) Gas assist (ML)

Power trim standard 4 5 5 6 6 6 with ratchet

trim 6 6 6 6 4 4

Fuel Tank N/A N/A Optional Optional Optional Separate 25 litres

Separate 25 litres Optional Optional Separate

25 litresSeparate 25 litres

Separate 25 litres

Separate 25 litres

Separate 25 litres

Separate 25 litres

Separate 12 litres

Separate12 litres

Integral 2.5 litres & remote 12

litres

Integral 2.5 litres (remote

opt.)Integral 1.4

litresIntegral 1.4

litres

Weight 1 218kg 193kg 137kg 137kg 99.5kg 109kg BF 100kg 100kg 93kg 78kg 72kg 52kg 51kg 42kg 35kg 35kg 26kg 26kg 20kg 20kg 13kg 13kg

Shaft Length 20” (L) 25” (XL) CXL

20” (L) 25” (XL) CXL

20” (L) 25” (XL) 20” (L) 20” (L) 20” (L) 20” (L) 20” (L) 20” (L) 20” (L) 15” (M)

20” (L) 15” (M) 20” (L)

15” (M) 20” (L)

15” (M) 20” (L) 15” (M) 15” (M)

20” (L) 15” (M) 20” (L)

15” (M) 20” (L) 15” (M) 15” (M) 15” (M)

Propeller Drive Flo-Torq II Flo-Torq II Flo-Torq II Flo-Torq II Splined

rubber hubSplined

rubber hub X-Long 22.5”

Splined rubber hub rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub

Splined rubber hub Shear pin Shear pin

Prop Selec-tion (Pitch) 3 11”- 36” 11”- 36” 9”- 28” 9”- 28” 9”- 28” 10”- 26” 8”-19” 8”-19” 8”-19” 10”-14” 8”-14” 8”-14” 7”- 9” 6.5”-10.5” 6.5”-10.5” 6.5”- 8.5” 6.5”- 8.5” 6”- 8” 6”- 8” 6”- 7” 6”- 7”

Induction System

Loop-charged (EFI) elec.

fuel injection

Loop-charged (EFI) elec.

fuel injectionLoop-charged

(3 carb)Loop-charged










(1 carb)Cross flow (1 carb)

Cross flow (1 carb)

Loop-charged (1 carb)






Oil Injection Standard Standard Standard Standard Standard Pre-mix Pre-mix Standard Standard Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix Pre-mix



Mercury TwoStroke

© 2013 Mercury Marine. Mercury, Mercury Outboards, Verado, MerCruiser, Quicksilver and Sea Pro are registered trademarks with OptiMax, the Mercury logo and ‘#1 on the water’ being trademarks of the Brunswick Corporation. Please note: Mercury Marine continuously explores means to improve the products it designs, manufactures and distributes. Changes to the specifications of its engines, boats and accessories are ongoing. Every effort is made to produce sales and service literature which is current. This brochure should not be regarded as a precise guide to the latest specifications. This brochure is also not an offer for sales of any particular engine, boat or accessories. Distributors and dealers are not agents of Mercury Marine and they have no authority to bind Mercury Marine by any express undertaking or representation, including but not limited to representations of a product sales, application or service nature.

Knowledge is PowerFind engine specifications, boater testimonials and informative comparisons. mercurymarine.com.au

Par

t no.

90

8750

72 1

3

www.facebook.com/mercurymarineaust

twitter.com/mercurymarineau

http://www.youtube.com/user/MercuryMarineAU

Keep up with all the latest news, deals and info from Mercury Marine Australia and New Zealand.

Documents

Mercury Marine Outboard Brochure 2014