Merchant product guide to Insulation Insulation... · So SIG Insulation have done all the hard work for you. ... Screws and Fixing Products Wood Glue42 Tapes 42 ... Expansion Joint

Merchant product guide to Insulation

Here to help with product choice

So SIG Insulation have done all the hard work for you.

We’ve put together in this guide all the important details on the top selling, most widely used, quality products offered by our trading companies – all the insulation you’ll need for your walls, roofs, lofts and floors. We’ve included thermal and acoustic insulation, fire protection materials, timber frame products, dry lining and accessories.

These can be delivered exactly where and when you want them via our fast, flexible and reliable vehicle fleets, which also include specialist offloading where required.

SIG Insulation is part of the SIG group, which has recently linked together its insulation, fixings, construction accessories and interiors businesses, meaning that you can now source a huge range of products, all from your local SIG Insulation stockists, which becomes a true ‘one stop shop’ for specialists.

Our in-depth stock holding is unrivalled, so you can also come to us for your:

• Ceilings, partitioning, raised access flooring

• Specialist fixings

• Power tools and accessories

• Site access equipment

• Mechanical and electrical products

• Safety products and workwear

www.siginsulation.co.uk

Introduction

Choosing the right materials for your project can be quite a task, with the vast choice of product ranges available and new products constantly being introduced.

2

Contents Page

Introduction

WALLS 10 - 17

TIMBER FRAME 43 - 47

LOFTS 18 - 21

ACOUSTIC 48 - 55 INSULATION

ROOFS - PITCHED/ 22 - 25 ‘ROOM-IN-A-ROOF’

ROOFS - FLAT 26 - 31 FLOORS 32 - 37 DRY LINING 38 - 42

FIRE PROTECTION 56 - 62

3

Just ask the experts

Just ask the expertsThroughout the SIG Insulation branch network, our staff have sound technical expertise. They can advise you on Building Regulations and the best solutions available for your application, meeting legal and safety requirements.


For more information contact your local SIG Insulation branch, details can be found on the back cover of this guide or visit our website at www.siginsulation.co.uk

4

Just ask the experts

Walls

Lofts

Roofs - pitched/ ‘room-in-a-roof’

Roofs - flat

Floors

Dry Lining

Timber Frame

5


Product Listing

WallsInsulation

Actis Hyrbis Insulation 11

Actis HControl Hybrid Insulating Vapour Barrier 11

Actis Boost’r Hybrid Insulating Membrane 11

Celotex CG5000 11

Celotex CW4000 11

EcoTherm Eco-Cavity 11

Isover CWS 32 + 36 12

Isover RD Party Wall Roll 12

Kingspan® Kooltherm® K8 Cavity Board 12

Kingspan® Thermawall®

TW50 12

Knauf Insulation Earthwool DriTherm Cavity Slab 32/34/37 12

Knauf Insulation Earthwool FactoryClad Rolls 12

Knauf Insulation Earthwool Timber Frame Party Wall Slab 13

Knauf Insulation Masonry Party Wall Slab 13

Recticel Eurowall Cavity 13

Rockwool Cavity 13

Rockwool HP Partial Fill 14

Superglass Superwall 32/34/36 Cavity Wall Slab 14

Superglass Superwall Roll 36 14

Superglass Party Wall Roll 14

Ancillaries

British Gypsum Glasroc H TILEBACKER 15

Cavity Fire Barriers 15

Cladding 15

Damp Proof Course 15

Euroform EZWall Real Brick Cladding System 15

Euroform Rendaboard® 15

Euroform Versapanel Class ‘0’ Cement Particle Board 15

Euroform Versapanel Eco Class ‘0’ Cement Particle Board 16

Euroform WeatherClad 16

External Renders 16

James Hardie® HardieBacker™ 16

Knauf Aquapanel Interior 16

Marmox Multiboard 16

Membranes 16

Protection Board 17

Movement Joints 17

Siniat GTEC Aquaboard 17

Thermal Laminates 17

Cavity Closers 17

Wall Ties/Retaining Clips 17

Wediboard 17

LoftsInsulation

Isover Spacesaver/Plus 19

Isover Spacesaver Ready-Cut 19

Knauf Insulation Earthwool Loft Roll 40/44 (Combi-Cut) 19

Micafil Vermiculite 20

NaturePro Sheep’s Wool 20

Rockwool Roll 20

Superglass Multi-Roll 40/44 20

Ancillaries

Chipboard 21

Plywood 21

Fixings 21

Loft Ladders & Access Traps 21

Cold Water Tank Jackets 21

Pipe Insulation 21

Roofs Pitched/ ‘Room-In-A-Roof’Insulation




Actis Triso Super 10+ 22

Celotex FR5000 22

Celotex GA4000, TB4000 & XR4000 22

EcoTherm Eco-Versal 23

Gen-X® 23

Isover Timber Frame Batt 23

Kingspan® Kooltherm® K7 Pitched Roof Board 23

Kingspan® Thermapitch® TP10 23

Knauf Insulation Earthwool Flexible Slab 23

Knauf Insulation Earthwool Rafter Roll 23

Knauf Insulation Rocksilk Pitched Roof Slab 24

NaturePro Sheep’s Wool 24

Recticel Eurothane GP 24

Rockwool Flexi 24

Superglass Timber & Rafter Batt 32 24

Superglass Timber & Rafter Roll 32-44 24

6

Product Listing

Ancillaries

Breathable Membranes 25

Fixings & Additional Products 25

Thermal Laminate 25

Vapour Barriers 25

Vents 25

Roofs - FlatInsulation

Celotex EL3000 27

Celotex TA4000 27

Celotex TC3000 27

Celotex TD4000 27

EcoTherm Eco-Fix 27

EcoTherm Eco-Deck 27

EcoTherm Eco-Torch 27

EcoTherm Eco-Bond 28

Kingspan® OPTIM-R 28

Kingspan® Thermaroof® TR26 LPC/FM 28

Kingspan® Thermaroof® TR27 LPC/FM 28

Kingspan® Thermaroof® TR31 28

Knauf Insulation Rocksilk Krimpact Flat Roof Slab 28

Knauf Insulation Rocksilk Krimpact Flat Roof Slab Extra 29

Recticel Eurothane Eurodeck 29

Recticel Plylok 29

Recticel Powerdeck B 29

Recticel Powerdeck F 29

Rockwool Hardrock Multi-Fix (DD) 29

Inverted Insulation

Dow Roofmate SL-A 30

Dow XENERGY 30

Kingspan Styrozone® H 350 R 30

Kingspan Styrozone® N 300 R 30

Knauf Insulation Polyfoam ECO Roofboard Extra 30

Membranes

Dow Roofmate MinK 30

Kingspan Aquazone 30

Knauf Insulation Polyfoam Slimline Membrane 30

Ancillaries

Acoustics 31

Soudal PU Adhesive 31

Tapered Systems 31

Upstand Boards 31

Vapour Barriers 31

Vents 31

FloorsInsulation

Actis Triso Sols 33

Celotex FF4000 33

Celotex FR5000 33

Celotex GA4000, TB4000 & XR4000 33

Dow Floormate A 33

EcoTherm Eco-Versal 33

Kay Metzeler-Flooring 34

Kay Metzeler-InsuLfloor-Grid 34

Kay Metzeler- InsuLfloor-Grooved 34

Kingspan® Kooltherm® K3 Floorboard 34

Kingspan® Thermafloor® TF70 34

Knauf Insulation Earthwool Acoustic Floor Slab/Plus 35

Knauf Insulation Earthwool Acoustic Floor Roll 35

Knauf Insulation Earthwool Thermal Floor Slab/Plus 35

Knauf Insulation Polyfoam ECO Floorboard Standard/Extra 35

Knauf Insulation Polyfoam ECO Floorboard Super 35


Rockwool Flexi 36

Rockwool Rock Floor 36

Superglass Multi Acoustic Roll 36

Superglass Multi Purpose Acoustic Slab 36

Ancillaries

Cement 36

Chipboard 36

Damp Proof Membranes 37

Euroform Versafloor 37

Floor Screed 37

HardieBacker™ 250 Cement Board 37

Plywood 37

Protection Board 37

Insulation Support Net 37

Underfloor Ventilation 37

Dry liningPlasterboards & Metal Systems

Ceiling Systems 39

Drywall Plasterboards 39

Metal Systems 39

Thermal Laminate 39

7


Product Listing

Specialist Boards

British Gypsum Glasroc Rigidur H 40

Fermacell Boards 40

Render Carrier Board 40

Tile Backer Boards 40

Ancillaries

Access Panels 41

Compounds 41

Coving 41

Drywall Adhesive 41

Finishing & Plasters 41

Galvanised Beads and Security Mesh 41

PVC Beads 41

Screws and Fixing Products 42

Tapes 42

Timber FrameInsulation




Celotex GA4000, TB4000 & XR4000 44

Isover Timber Frame Batts and Rolls 44

Kingspan® Kooltherm® K12 Framing Board 45

Kingspan® Thermawall® TW55 45

Knauf Insulation Earthwool Flexible Slab 45

Knauf Insulation Earthwool FrameTherm Roll 40/35/32 45

Knauf Insulation Earthwool FrameTherm Slab 38/35/32 45

Knauf Insulation Earthwool Timber Frame Party Wall Slab 45


Superglass TF Party Wall Roll 46

Superglass Timber & Rafter Roll 32-44 46

Superglass Timber & Rafter Batt 32-44 46

Ancillaries

Breathable Membranes 47

Builder’s Metalwork 47

Mayplas 551 Timber Frame Cavity Barrier 47

Vapour Control Layers 47

Wood Glue 47

Acoustics Party Wall

Isover APR 1200 49

Knauf Insulation Earthwool Acoustic Roll 49

Superglass Multi Acoustic Roll 49

Flooring

Regupol E48 Acoustic Underscreed 49

Cellecta YELOfon HD10+ 49

Insulation

Acoustilay 50

Fellert ‘Even Better’ Spray Applied Acoustic Plastering System 50

Jumpax 50

Karma Acoustiwall 50

Karma Acoustic Blanket 50

Karma Acoustic EasyPanel 50

Karma Acoustic Overlay 23 50

Karma Acoustic OverlayPlus 26 51

Karma Lewis Sheeting 51

Karma Masspanel with TNF 70 Fire Retardant Slab 51

Karma Soundlay 9 51

Karma Soundlay 15 51

Karma Joistdeck 37 51

Maxi 60 Ceiling 51

Park Bearer 51

Reduc Foundation 35 and 39 52

Reduc Micro 17/Micro 21 52

Reduc Strata/Strata Extra 52

Reflex Bearer 52

Regupol 3912 Acoustic Underlayment 52

Regupol 4515 Eco Soundproof Underlay 52

Regupol 4515 Multi Acoustic Underlay 52

Regupol 6010BA Acoustic Underscreed 53

Regupol 6010SH Acoustic Underscreed 53

Regupol 7210C Acoustic Underscreed 53

Regupol Quietlay Acoustic Underscreed 53

Rockwool Acoustic Slab 53

Saddle System 53

Soundblocker 53

SoundDeck CLD System and SoundDeck Hangers 53

SoundDeck Overlay Acoustic Floor Boards 54

Soundlay E - Economic Soundproof Overlay Material 54

8

Product Listing

Steicofloor 54

SuperPhon Acoustic Wall Panels 54

SuperPhon High Impact Ceiling Grid and Walls Panels 54

SuperPhon – PhotoPhon 54

SuperPhon Suspended Ceiling Absorbers 54

Ancillaries

CMS Bond Adhesive 55

Karma Isomax Clips and Channel 55

Karma Acoustic Perimeter Strip 55

Karma Acoustic Pipe Wrap 55

Karma Ecopearls 55

Karma Putty Pads 55

Karma PVA Adhesive (D3) 55

Mayplas SD5 & SD10 Sound Deadening Foam 55

Speedline Acoustic Sealant 55

Fire ProtectionInsulation

AIM Fire Stop Strips 57

AIM Fire Stop Blocks 57

AIM Wall Cavity Fire Barrier 57

AIM Partition Head Fire Barrier 57

AIM Raised Access Floor Fire Barrier 57

British Gypsum Glasroc F 57

Culimeta-Saveguard Firehalt SF 57

Culimeta-Saveguard Firehalt 60/30 57

Culimeta-Saveguard Firehalt 120/30 Gold 57

Culimeta-Saveguard Firehalt 120/60 57

Euroform Versafire 58

Isover ULTIMATE Cavity Barriers 58

Knauf Insulation Rocksilk PyroDuct Slab 58

Knauf Insulation Rocksilk FireTech Slab 58

Promat MASTERBOARD® 58

Promat PROMATECT®-HD 58

Promat PROMATECT®-L500 58

Promat SUPALUX® 59

Promat SUPALUX® Bevelled Edge Ceiling Tiles 59

Promat SUPALUX® Door Facings 59

Promat TL Board® 59

Promat VERMICULUX® 59

Rockwool Ablative Coated Batt 59

Rockwool Ablative Coating 59

Rockwool BEAMCLAD® systems (previously Conlit 150) 60

Rockwool Fire Barrier 60

Rockwool Fire Barrier Systems 60

Rockwool Fire Compound 60

Rockwool Fire Duct System 60

Rockwool Fire Rated Silicone 60

Rockwool Fire Tube 60

Rockwool Firestop Pipe Collars 60

Rockwool Insulated Fire Sleeves 61

Rockwool Intumescent Pillows 61

Rockwool Linear and Trapezoidal Firestops 61

Rockwool Multi-Cable Firestop 61

Rockwool PWCB 61

Rockwool Soffit Slab 61

Rockwool SP Firestop Slab 61

Rockwool TCBs 61

Ultra Universal Pipe Wrap 61

Ultra Universal Pipe Sleeve 62

Ancillaries

Rockwool Firepro Glue 62

Rockwool Firestop High Expansion Intumescent Sealant 62

Rockwool High Expansion Sealant 62

Rockwool Intumescent & Acoustic Sealant 62

Rockwool Intumescent Expansion Joint Seal 62

Rockwool Internal Socket Intumescent Putty Pads 62

Ultra Fire Rated Intumescent Acoustic Acrylic Sealant 62

9

Need help conquering the gap?Speak to the experts in cavity wall insulation• Sound, impartial advice from UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via nationwide branch network• Ancillary products• Products delivered exactly where and when you need them• Vehicle fl eets with offl oad facilities• Fast, fl exible, reliable

For details of your local branch, call us today on 0800 183 2737

or visit our website


SIGI Cavity Wall Advert Rebrand_A5.indd 1 04/03/2014 11:05

WallsInsulation

Actis Hyrbis InsulationA unique honeycombed pattern insulation material for timber frame and masonry walls. High thermal performance. Thermal Conductivity: 0.033 W/m.KStandard Sizes: 1200mm wide rolls Thickness: 45mm - 135mm

Actis HControl Hybrid Insulating Vapour BarrierA reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in walls.Thermal Performance: R = 3.2m².K/W (EN 16012 with 2 air voids)Standard Sizes: 1600mm x 6250mm rolls Thickness: 45mm

Actis Boost’r Hybrid Insulating MembraneA reflective breathable membrane with a built-in thermal performance for use on the cold side of the building fabric in walls.Thermal Performance: R = 2.4m².K/W (EN 16012 with 2 air voids) Standard Sizes: 1500mm x 6700mm rolls Thickness: 35mm

Celotex CG5000A premium performance PIR insulation board for use in partial-fill cavity wall applications to meet Part L Building Regulations (England and Wales).Thermal Conductivity: 0.021 W/mKStandard Sizes: 1200mm x 450mm Thickness: 40mm - 100mm

Celotex CW4000 A high performance PIR insulation board providing thermal performance in masonry cavity walls to help meet Part L Building Regulations (England and Wales).Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 450mm Thickness: 25mm - 100mm

EcoTherm Eco-CavityEcoTherm® Eco-Cavity boards are suitable for partial fill cavity wall insulation in coastal and exposed locations.Thermal Conductivity: 0.022 W/mKStandard Sizes: 450mm x 1200mm Thickness: 25mm - 100mm

11


Isover CWS 32 + 36A glass mineral wool full fill cavity slab providing thermal performance in masonry cavity walls to meet Part L Building Regulations (England and Wales). Thermal Conductivity: 0.032 - 0.036 W/mKStandard Sizes: 1200mm x 455mmThickness: 50mm - 150mm

Isover RD Party Wall Roll A glass mineral wool roll designed for use in Robust Detail wall constructions to exceed acoustic perfor-mance requirements set out in Building Regulations Approved Document E (England and Wales). The product also conforms to the Robust Details generic full fill mineral wool specification for all other masonry cavity separating details.Standard Sizes: 75mm x 2x455mm x 8500mm 100mm x 2x455mm x 6000mm 125mm x 2x455mm x 5000mm 150mm x 2x455mm x 4000mm

Kingspan® Kooltherm® K8 Cavity BoardPremium performance rigid thermoset insulation for use in partial fill cavity walls.Thermal Conductivity: 0.023 - 0.020 W/mKStandard Sizes: 1200mm x 450mm Thickness: 20mm - 150mm

Kingspan® Thermawall® TW50A rigid, high performance PIR partial-fill cavity wall insulation board.Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 450mm Thickness: 25mm - 100mm

Knauf Insulation Earthwool DriTherm Cavity Slab 32/34/37 Semi-rigid or rigid slabs of non-combustible, glass mineral wool for the thermal insulation of full or partial-fill masonry walls.Thermal Conductivity: 0.032 - 0.037 W/mKStandard Sizes: 1200mm x 455mmThickness: 50mm - 150mm

Knauf Insulation Earthwool FactoryClad Rolls Earthwool FactoryClad is designed for thermal and acoustic insulation of roofs and walls in profiled metal clad buildings and portable buildings.Thermal Conductivity: 0.032/0.037/0.040 W/mKStandard Sizes: Width 1200mm Length 4.35m - 14.10mThickness: 80-220mm (0.040 W/mK) 100 - 180mm (0.037 W/mK) 80 - 100mm (0.032 W/mK)

WallsInsulation

12

Walls

Knauf Insulation Earthwool Timber Frame Party Wall Slab A full fill thermal and acoustic solution for the thermal insulation of timber frame party walls to help reduce party wall bypass and is designed for use in Robust Detail wall constructions. Allows a zero-effective U-value to be inputted into SAP calculations as below when used in conjunction with effective sealing at all exposed edges.Standard Sizes: 1200mm x 600mm Thickness: 60mm, 85mm and 110mm

Knauf Insulation Masonry Party Wall Slab Full fill thermal and acoustic solution for the thermal insulation of masonry party walls to help reduce party wall bypass and is designed for use in Robust Detail wall constructions. Allows a zero-effective U-value to be inputted into SAP calculations when used in conjunction with effective sealing at all exposed edges.Standard Sizes: 1200mm x 600mmThickness: 75mm and 100mm

Recticel Eurowall Cavity A high performance PIR insulation board for use in part filled cavity walls. Thermal Conductivity: 0.022 W/mkStandard Sizes: 1200mm x 450mmThickness: 25mm - 100mm

Rockwool Cavity Full-fill stonewool cavity wall insulation for new masonry cavity walls. Thermal Conductivity: 0.037 W/mKStandard Sizes: 1200mm x 455mm Thickness: 50mm - 150mm

Insulation13


Rockwool HP Partial FillA dual density insulation for partial-fill masonry cavities. Robust outer face maintains cavity, while resistant inner face absorbs irregularities of the inner leaf. Thermal Conductivity: 0.034 - 0.035 W/mKStandard Sizes: 1200mm x 455mm Thickness: 65mm - 120mm

Superglass Superwall 32/34/36 Cavity Wall SlabSuperwall is a BBA approved mineral wool cavity wall slab. Superwall can be used in a Partial Fill or Full Fill applications.Thermal Conductivity: 0.032 W/mK, 0.034 W/mK and 0.036 W/MKStandard Sizes: 1200mm x 455mm Thickness: 50mm - 150mm

Superglass Superwall Roll 36Superwall Roll 36 is a BBA approved mineral wool cavity wall Roll. Superwall Roll 36 is intended for Full Fill applications only.Thermal Conductivity: 0.036 W/mKWidth: 3mm x 455mm Length: 5m - 6.7mThickness: 75mm and 100mm

Superglass Party Wall RollParty Wall Roll is a mineral wool product designed for use with-in masonry party or separating walls as described with ADL1 (E & W) and Section 6 (Scot). Party Wall Roll may be used as a component in a number of Robust Detail solutions (see datasheets for RD listings).Width: 3mm x 455mm Length: 5m - 6.7mThickness: 75mm and 100mm

WallsInsulation

14

WallsAncillaries

British Gypsum Glasroc H TILEBACKER Provides outstanding performance for walls and floors as a tile backing board and in environments where there is frequent exposure to water and moisture.

Cavity Fire BarriersA range of cavity fire barriers to suit a variety of external wall constructions, such as, masonry, timber frame & rainscreen cladding applications:• Mayplas 552 Masonry Cavity Stop Sock• Mayplas 551 Timber Frame Cavity Barrier• Mayplas 557 Acoustic Party Wall DPC• AIM Wall Cavity Fire Barrier• AIM VRB Lite• AIM VRB Plus• AIM Horizontal Fire Closer

CladdingHigh performance, rainscreen cladding with the additional benefit of a full fabrication service. Suitable for use in areas such as facades, soffits, roofline applications.• Rockpanel • Marley Eternit

Damp Proof CourseDesigned to prevent the passage of moisture in brick and block work from external sources. The product is suitable for use in vertical and horizontal applications throughout domestic constructions.

Euroform EZWall Real Brick Cladding SystemHigh-performance exterior and interior brick panel system for residential, commercial and industrial cladding.

Euroform Rendaboard®

A Class ‘0’ external building board for use with approved direct rendering applications.Panel Size: 2400mm x 1200mm*Panel Thickness: 9mm, 12mm*Fabrication service available

Euroform Versapanel Class ‘0’ Cement Particle BoardClass ‘0’ external cement bonded particle board suitable as a carrier to approved EWI render systems. CE Marking to EN 13986.Panel Sizes: 2400mm x 1200mm*, 2800mm x 1200mm* Panel Thicknesses: 8mm/10mm/12mm/16mm/18mm*Fabrication service available

15


Euroform Versapanel Eco Class ‘0’ Cement Particle BoardFully external/internal use, manufactured to BS EN 634 Part 1 & 2 with FSC® Mix Chain of Custody certification. CE Marking to EN 13986.Panel Sizes: 2400mm x 1200mm*, 2800mm x 1200mm* Panel Thicknesses: 8mm, 10mm, 12mm, 16mm, 18mm

Euroform WeatherClad Timber grain embossed plank designed for use in direct weathering applications when used in conjunction with external grade textured finishes. Panel Size: 3050mm x 190mm (30mm overlap required when fixing) Panel Thickness: 7.5mm

External RendersA durable and visually acceptable skin for an unattractive construction. Renders can reduce rain penetration and maintain the thermal insulation of walls.• Kilwaugther K-Rend• Weber Monocouche

James Hardie® HardieBacker™ HardieBacker 6 mm is a thick cement backerboard for tile and stone, to be used as an alternative to plywood for tiling on floors and countertops. The product is a water-resistant for tile that is installed over an existing timber floor.

HardieBacker 12mm is a water-resistant, cement backerboard for tile that fastens directly to the wooden frame of a wall. The 12mm board for use on tile and stone, which is used as an alternative to plasterboard for tiling on walls.

Knauf Aquapanel InteriorKnauf Aquapanel Interior Cement Board is a durable tile backer for wet indoor areas such as bathrooms, shower rooms and wet rooms. Resistant to mould and mildew, Knauf Aquapanel Interior will not deteriorate in water. It retains its strength even if fully immersed.

Marmox Multiboard Multiboards can be used to insulate and waterproof walls, floors and ceilings and are available in many thicknesses ranging from 4mm to 60mm. 12.5mm, 20mm and 30mm are ideal for walls although thicker sizes can also be used. The thinner 4mm, 6mm and 10mm are ideal for covering floors before tiling.

Membranes Provide protection for timber against wind-driven rain, snow and dust during construction, whilst allowing the timber to breathe.• Dupont Tyvek Reflex • TF200

WallsAncillaries

16

WallsAncillaries

Protection BoardA versatile corrugated polypropylene board providing multi-surface impact protection during site works. The product is designed to protect floors, walls, partitions, doors, furniture and formwork.

Movement Joints• Polyethylene Joint Filler

Siniat GTEC AquaboardSuitable for insulating and waterproofing.Panel Sizes: 850mm - 3000mm x 1200mmPanel Thickness: 12.5mm - 15mm

Thermal LaminateThermal Laminate Boards provides a dry lining and thermal insulation solution in a single application and is suitable for internal lining of masonry walls and will assist in meeting or upgrading to the current Building Regulations. Products are available from British Gypsum, Celotex, Kingspan, Knauf, Siniat & Speedline.• British Gypsum• Celotex• EcoTherm• Kingspan• Knauf• Recticel• Siniat• Speedline

Cavity ClosersTo reduce cold bridging when closing cavities at door and window frames within masonry wall situations• Speedline Cavity Closer Range – Speedline Cavity Closer XPS, FR & FR Plus• AIM Cavity Fire Closer• Dacatie• Kingspan Thermabate and Kooltherm Cavity Closer• Rockwool

Wall Ties/Retaining ClipsTo tie the outer and inner cavity wall layers together to prevent the risk of the outer wall layer collapsing:• Ancon• Timloc • Vista

WediboardThe Wedi building board combines a number of properties in one product, including moisture protection to heat insulation and a high level of functionality as a supporting material for tiles and other coverings and is available in different thicknesses.

17

18

Need a hand pitchingthe right insulation?Speak to the experts in pitched roof insulation• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products

For details of your local branch, call us today on 0800 183 2730,

email roofi [email protected] or visit our website


13715 SIGI Pitched Roof Ad.indd 1 24/02/2014 15:47

Lofts

Need a hand pitchingthe right insulation?Speak to the experts in pitched roof insulation• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products

For details of your local branch, call us today on 0800 183 2730,

email roofi [email protected] or visit our website


13715 SIGI Pitched Roof Ad.indd 1 24/02/2014 15:47

Insulation

Isover Spacesaver/PlusA glass mineral wool providing thermal insulation for domestic loft floors. Rolls are pre-perforated to 3 x 386mm and 2 x 580mm widths to fit between any joist spacing. Both supplied as either combi-cut or ready-cut.Thermal Conductivity: 0.040 W/mK - 0.043 W/mKStandard Sizes: 100mm x 1160mm x 7000mm 100mm x 1160mm x 9170mm 150mm x 1160mm x 4670mm 150mm x 1160mm x 6030mm 170mm x 1160mm x 5390mm 200mm x 1160mm x 3500mm 200mm x 1160mm x 3880mm

Isover Spacesaver Ready-CutA glass mineral wool providing thermal insulation for domestic loft floors. Easy to install, rolls are ready cut to provide half or third widths to fit 400mm or 600mm joist spacings.Thermal Conductivity: 0.043 W/mKStandard Sizes: 100mm x 1160mm x 9170mm 150mm x 1160mm x 6030mm 170mm x 1160mm x 5390mm 200mm x 1160mm x 3880mm

Knauf Insulation Earthwool Loft Roll 40/44 (Combi-Cut)A thermal and acoustic insulation for lightweight structures, primarily used for the thermal insulation ofpitched roofs at ceiling level. Both supplied as either combi-cut or ready-cut.Thermal Conductivity: 0.040 - 0.044 W/mKStandard Sizes: 1140mm (2 x 570mm/3 x 380mm)Length: 4.85m/7.53m/11.25m (40) 5.20m/7.03m/8.05m/12/18m (44)Thickness: 100mm - 200mm

19

TitleLofts


Insulation

Micafil Vermiculite A naturally occuring mineral expanded at a high temperature to produce aerated particles. Often used as a loose fill in lofts.Standard Sizes: 0.1 Cubic Metre Bags

NaturePro Sheep’s Wool A completely sustainable, renewable material with natural insulating properties, releasing moisture for a cooling effect in the summer and absorbing moisture in the winter. Suitable for use in roofs, walls and floors.Thermal Conductivity: 0.039 W/mKStandard Sizes: 1200mm x 575mm Thickness: 100mm - 150mm

Rockwool Roll Medium density multi-use stonewool insulation for the thermal insulation of roof spaces in domestic, commercial and industrial buildings.Thermal Conductivity: 0.044 W/mKStandard Sizes: 2500mm - 3650mm x 1200mm Thickness: 100mm - 220mm

Superglass Multi-Roll 40/44Multi-Roll is a lightweight mineral wool roll, designed to provide thermal and acoustic insulation in lofts. The roll may be split to allow the user the choice of three widths and can be used in any other application where a lightweight insulation is required. Thermal Conductivity: 0.040 W/mK and 0.044 W/mKStandard Sizes: 1200/2x600/3x400mm - 1160/2x580mm/3x386mm Thickness: 60mm - 200mm

naturePRO

20

Title Lofts

Chipboard Chipboard is created by gluing together wood particles with an adhesive, under heat and pressure. This creates a rigid board with a relatively smooth surface. Suitable for use in general building work and joinery applications.

PlywoodAn uncoated softwood plywood of thick veneer with a longitudinal grain.

FixingsA variety of fixings are available for every application.• Speedline

Loft Ladders & Access TrapsProvide the safest and most convenient solution to loft access. With a wide choice of models available, made from aluminium or timber, you can find the right loft ladder to suit your needs.• Abru • Glidevale Loft Access Traps • Manthorpe Loft Access Traps• Timloc Loft Access Traps

Cold Water Tank Jackets For the thermal insulation of hot water tanks and cylinders.

Pipe InsulationThermal insulation of domestic heating and plumbing pipe work for energy conservation and frost protection.• Armacell • Kingspan Tarec • NMC • Rockwool

Ancillaries21

TitleRoofs Pitched/‘Room-In-A-Roof’


Insulation

Actis Boost’r Hybrid Insulating MembraneA reflective breathable membrane with a built-in thermal performance for use on the cold side of the building fabric in pitched roofs. NHBC & LABC approved.Thermal Performance: R = 2.4m².K/W (EN 16012 with 2 air voids) Standard Sizes: 1500mm x 6700mm rolls Thickness: 35mm

Actis Hyrbis InsulationA unique honeycombed pattern insulation material for use between rafters in pitched roofs. Helps to meet the Part L Building Regulations (England & Wales) and section b (Scotland). NHBC & LABC approved. Thermal Conductivity: 0.033 W/mKStandard Sizes: 1200mm wide rolls Thickness: 45 - 135mm

Actis HControl Hybrid Insulating Vapour BarrierA reflective vapour control layer with built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in pitched roofs. Thermal Performance: R = 3.2m².K/W (EN 16012 with 2 air voids) Standard Sizes: 1600mm x 6250mm rollsThickness: 45mm

Actis Triso Super 10+ A thin thermo-reflective insulation product ideal for roof and attic conversions. Performance certified by BM TRADA Certification in accordance with UKAS accredited BIP-001 test methodology. Airtight and water vapour resistant: Z > 500MN.s/g. Thermal Efficiency: Equivalent to 210mm of mineral wool (λ = 0.04W/m.k) Certificate BM TRADA “Q-MARK” BIPS-0104 Standard Sizes: 1600mm x 10000mm Thickness: 35mm

Celotex FR5000 A premium performance PIR insulation board used above, between and/or below rafters in pitched roofs to create a habitable space.Thermal Conductivity: 0.021 W/mKStandard Sizes: 1200mm x 2400mmThickness: 25mm - 150mm

Celotex GA4000, TB4000 & XR4000 Rigid PIR insulation boards used above, between and/or below rafters in pitched roofs to create a habitable space.Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mmThickness: 12mm - 200mm

22

Roofs Pitched/‘Room-In-A-Roof’

EcoTherm Eco-Versal A PIR insulation board applied over, under and/or between the rafters in slate or tiled, warm or cold pitched roofs. Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mm Thickness: 25mm - 150mm

Gen-X® A multi-layer foil insulation for pitched roof applications. Complete thermal insulant, air leakage and vapour barrier in one. BBA Approved. Standard Sizes: 12,500mm x 1200mmThickness: 33mm

Isover Timber Frame BattA glass mineral wool batt providing thermal and acoustic insulation for new-build Room-in-the-Roof or loft conversions. The batts push-fit between rafters at 600mm centres without the need for measuring or cutting. Thermal Conductivity: 0.032 - 0.043 W/mKStandard Sizes: 1175mm x 570mm Thickness: 50mm - 150mm

Kingspan® Kooltherm® K7 Pitched Roof BoardPremium performance rigid phenolic insulation for use in tiled or slated pitched warm roof spaces. Thermal Conductivity: 0.020 - 0.023 W/mKStandard Sizes: 2400mm x 1200mm Thickness: 25mm - 150mm

Kingspan® Thermapitch® TP10A high performance rigid PIR insulation board, for use at rafter level in tiled or slated pitched warm roofs.Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mm Thickness: 20mm - 150mm

Knauf Insulation Earthwool Flexible SlabA lightweight rock mineral wool multi-purpose push fit slab for general thermal and acoustic applications. Thermal Conductivity: 0.035 - 0.037 W/mKStandard Sizes: 1200mm x 600mm and 1200mm x 400mm Thickness: 50mm - 140mm

Knauf Insulation Earthwool Rafter RollA medium density glass mineral wool roll used for the thermal insulation of warm pitched roofs – designed for standard rafter widths but also suitable for situations where rafters are not spaced at regular centres. Thermal Conductivity: 0.032 - 0.036 W/mKStandard Sizes: 7900mm - 4000mm x 1200mm Thickness: 50mm - 200mm

23


Roofs Pitched/‘Room-In-A-Roof’Insulation

Knauf Insulation Rocksilk Pitched Roof SlabA high density, water repellent, rock mineral wool slab specifically developed for over rafter (sarking) insulation. Thermal Conductivity: 0.038 W/mKStandard Sizes: 1800mm x 600mmThickness: 50mm and 70mm

NaturePro Sheep’s WoolA completely sustainable, renewable material with natural insulating properties, releasing moisture for a cooling effect in the summer and absorbing moisture in the winter. Suitable for use in roofs, walls and floors. Thermal Conductivity: 0.039 W/mK Standard Sizes: 120mm x 575mmThickness: 100mm -150mm

Recticel Eurothane GP A high performance PIR insulation board for use in pitched roof applications. Suitable for use either between the studs or as an insulated sheathing. Thermal Conductivity: 0.022 W/mK Standard Sizes: 2400mm x 1200mm Thickness: 25mm - 150mm

Rockwool Flexi A unique insulation product with a patented flexible edge along one side. The flexible edge allows the product to be tightly fitted between timber and metal frames and is designed for use in walls, partitions, floors and roofs.Thermal Conductivity: 0.035 - 0.038 W/mK (0.035@140mm)Standard Sizes: 1200mm x 600mmThickness: 50mm - 140mm

Superglass Timber & Rafter Batt 32 Timber & Rafter Batt 32 is a resilient, medium density mineral wool batt, designed to give thermal and acoustic insulation for Room in the Roof applications and walls of studded construction in timber-framed buildings. Self supported by friction fitting between timber studs.Thermal Conductivity: 0.032 W/mKStandard Sizes: 1175mm x 570mm Thickness: 75mm - 100mm

Superglass Timber & Rafter Roll 32-44Timber & Rafter Roll is a mineral wool roll, designed to give thermal and acoustic insulation for room in a roof applications in timber-framed buildings. The rolls are self-supported by friction fitting between timber studs.Thermal Conductivity: 0.032 W/mK - 0.044 W/mK Width: 2mm x 570mm and 3mm x 370mm Thickness: 50mm - 200mm

naturePROS U S T A I N A B L E T H E R M A L L Y I N S U L A T I N G M A T E R I A L S

24

Roofs Pitched/‘Room-In-A-Roof’

Breathable MembranesHelps to reduce the risk of harmful condensation in the roof space.• Dupont Tyvek Supro • Isover Vario Membrane • Kingspan Nilvent• Glidevale Protect • Til-R Breathable Membrane

Fixings & Additional ProductsA variety of fixings are available for every application.• Big Twist • Helifix• Loft Access Traps• Loft Ladders• Tapes• Velux Windows

Thermal LaminateThermal Laminate Boards provides a dry lining and thermal insulation solution in a single application and are suitable for internal lining of masonry walls and will assist in meeting or upgrading to the current Building Regulations. Products are available from British Gypsum, Celotex, Kingspan, Knauf, Siniat & Speedline.

Vapour BarriersPlastic or foil sheets that resist passage of moisture through wall, pitched roof, ceilings and floor assemblies of buildings.• DuPont AirGuard Control• DuPont AirGuard Reflective• DuPont AirGuard Smart• Visqueen

VentsPitched roof ventilation.• Glidevale • Manthorpe• Timloc

Ancillaries25

Are you fl at out...

• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products




...trying to fi nd the right fl at roof insulation?

SIGI Flat Roof Advert 210x297.indd 1 24/02/2014 15:52

Roofs - FlatInsulation

Celotex EL3000 Insulation for use in built-up flat roofing applications including hot-applied bituminous and mastic asphalt waterproofing systems and fully adhered single-ply membranes.Thermal Conductivity: 0.025 - 0.027 W/mKStandard Sizes: 600mm x 1200mm Thickness: 50mm - 150mm

Celotex TA4000A flat roofing insulation board for use with mechanically fixed and ballasted single ply weathering systems.Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mmThickness: 50mm - 140mm

Celotex TC3000A flat roofing insulation board for use within built-up flat roofing applications including hot applied bituminous, mastic asphalting and torch-on systems.Thermal Conductivity: 0.025 – 0.027 W/mKStandard Sizes: 1200mm x 600mmThickness: 50mm - 150mm

Celotex TD4000Rigid PIR insulation bonded to a facing of 5.5mm WBP ply, purpose designed for use in light traffic flat roof applications such as small extensions or garage roofs.Thermal Conductivity: 0.022 W/mK Standard Sizes: 1200mm x 2400mm Thickness: 95mm - 125mm

EcoTherm Eco-FixA rigid polyisocyanurate foam with aluminium foil on both sides for use with most mechanically fixed single-ply waterproofing membranes.Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mm Thickness: 30mm - 200mm

EcoTherm Eco-DeckA PIR foam pre-insulated thermal, tough, structural roof decking for flat roofs.Thermal Conductivity: 0.022 - OSB 0.14 W/mKStandard Sizes: 1200mm x 2400mm Thickness: 99mm - 159mm

EcoTherm Eco-TorchA PIR insulation for flat roofs, suitable for torching, roll and pour, single ply bitumous and ashphalt applications.Thermal Conductivity: 0.025 - 0.027 W/mKStandard Sizes: 1200mm x 600mm Thickness: 50mm - 150mm

Are you fl at out...

• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products




...trying to fi nd the right fl at roof insulation?

SIGI Flat Roof Advert 210x297.indd 1 24/02/2014 15:52

27

Roofs - Flat


Insulation

EcoTherm Eco-BondA PIR insulation for fully bonded single ply membrane systems. High performing PIR foam with mineral coated glass fibre tissue on both sides.Thermal Conductivity: 0.025 - 0.027 W/mKStandard Sizes: 1200mm x 600mm 2400mm x 1200mm (limited)Thickness: 30mm - 150mm

Kingspan® OPTIM-RA rigid vacuum insulation panel which is evacuated, encased and sealed in a thin, gas-tight envelope, giving outstanding thermal conductivity with minimum thickness.Thermal Conductivity: 0.07 W/mKStandard Sizes: 30mm - 600mm x 300mm - 1200mmThickness: 20mm - 60mm

Kingspan® Thermaroof® TR26 LPC/FMInsulation board for flat roofs waterproofed with mechanically fixed single-ply waterproofing. Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mmThickness: 25mm - 150mm

Kingspan® Thermaroof® TR27 LPC/FMInsulation board for flat roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt and cold liquid applied waterproofing. Thermal Conductivity: 0.026 - 0.024 W/mK Standard Sizes: 1200mm x 600mm, 2400mm x 1200mmThickness: 25mm - 150mm

Kingspan® Thermaroof® TR31A high performance structural 6mm plywood/rigid PIR insulation composite board purpose designed for use in light traffic flat roof applications such as small extensions or garage roofs.Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mm Thickness: 50mm - 160mm

Knauf Insulation Rocksilk Krimpact Flat Roof SlabThis high density solution has high compressive strength for flat roof applications where some occasional loading and impact resistance is crucial. Using Krimpact technology, this product achieves high compressive strength but also has good thermal performance.Thermal Conductivity: 0.038 W/mKStandard Sizes: 1200mm x 900mm Thickness: 50mm - 180mm

28

Roofs - Flat

Knauf Insulation Rocksilk Krimpact Flat Roof Slab ExtraHigh strength, dense rigid slabs made from rock mineral wool, manufactured using Krimpact technology, specifically designed for use in flat roofing applications. Rocksilk Krimpact Flat Roof Slabs contain a special additive to ensure their water repellency.Thermal Conductivity: 0.039 W/mKStandard Sizes: 1200mm x 900mm Thickness: 50mm - 150mm

Recticel Eurothane Eurodeck A high performance PIR insulation board, faced on both sides with a multi-layer coated aluminium foil. For use in warm flat roofs under mechanically fixed single-ply membrane systems. Thermal Conductivity: 0.022 W/mK Standard Sizes: 2400mm x 1200mm Thickness: 60mm - 150mm

Recticel Eurothane Plylok A high performance PIR insulation board bonded to 6mm plywood for use in warm flat roofs under built-up felt and single-ply membrane waterproofing systems. Purpose designed for use in light traffic flat roof applications such as small extensions or garage roofs. Thermal Conductivity: 0.022 W/mKStandard Board Items: 2400mm x 1200mm Thickness: 56mm - 126mm

Recticel Powerdeck B A high performance PIR insulation board, faced with a mineral coated glass fleece on the reverse side and a bituminous glass fleece with a sacrificial polypropylene film on the top surface. For use in warm flat roofs under torch-on, bituminous waterproofing systems. Thermal Conductivity: 0.026 W/mK for thicknesses below 80mm 0.025 W/mK for thicknesses of 80mm to 119mm 0.024 W/mK for thicknesses of 120mm and above Standard Sizes: 1200mm x 600mm Thickness: 25mm - 150mm

Recticel Powerdeck F A high performance PIR insulation board, faced on both sides with a perforated mineral coated glass fibre tissue. For use in warm flat roofs under built-up felt, mastic asphalt and approved single-ply membrane waterproofing systems. Thermal Conductivity: 0.026 W/mK for thicknesses below 80mm 0.025 W/mK for thicknesses of 80mm to 119mm 0.024 W/mK for thicknesses of 120mm and above Standard Sizes: 1200mm x 600mm Thickness: 25mm - 150mm

Rockwool Hardrock Multi-Fix (DD) Hardrock Multi-Fix (DD) is a versatile flat roof insulation board that can be used within an array of flat roof systems including; Bonded single-ply, torched applied bitumen and liquid membranes.Hardrock Multi-Fix (DD) has excellent acoustic properties and can be used in combination with Rockwool Acoustic Infill’s and Rockwool Acoustic Membrane to provide high performance, acoustic flat roof systems.Hardrock Multi-Fix (DD) is tested to the highest Euroclass A1 fire classification and has also been tested to meet the highest LPCB standards.

29

Roofs - Flat


Inverted Insulation

Dow Roofmate SL-AA Styrofoam XPS solution for insulating inverted roofs. BBA Approved.Thermal Conductivity: 0.034 W/mK - 0.036 W/mKStandard Sizes: 1250mm x 600mm Thickness: 100mm - 200mm

Dow XENERGYAn extruded polystyrene designed for inverted flat roofs. A Styrofoam XPS solution with improved thermal conductivity for insulating inverted roofs. Thermal Conductivity: 0.032 W/mKStandard Sizes: 600mm x 1250mmThickness: 100mm - 200mm

Kingspan Styrozone® H 350 RA high performance rigid extruded polystyrene insulation designed for inverted flat roofs and floors.Thermal Conductivity: 0.029 - 0.031 W/mKStandard Sizes: 600mm - 1250mmThickness: 30mm - 160mm

Kingspan Styrozone® N 300 RA high performance rigid extruded polystyrene insulation designed for inverted flat roofs and floors.Thermal Conductivity: 0.035 - 0.040 W/mKStandard Sizes: 600mm - 1250mmThickness: 30mm - 180mm

Knauf Insulation Polyfoam ECO Roofboard ExtraA high performance extruded polystyrene board suitable for inverted, flat and green roofs. Certified BRE Green guide Rating of A and BBA Approved.Thermal Conductivity: 0.033 W/mKStandard Sizes: 1250mm x 600mmThickness: 70mm - 220mm

Dow Roofmate MinKA spun bonded polyethylene geotextile waterproof layer that can replace the usual separating layer laid between the insulation and ballast giving enhanced thermal properties to the roof.

Kingspan AquazoneA water-infiltration reduction membrane for inverted roofs.

Knauf Insulation Polyfoam Slimline MembraneIs for use as a separating and filtration layer in low moisture impact protected membrane flat roofs.

Membranes

30

Roofs - Flat

Acoustics• AIM Thermal & Acoustic Profile Trough Infills• Maylas 575 Acoustic Roof Profiles• Rockwool Acoustic Deck Infills• Rockwool Acoustic Membrane• Kingspan Rubbertech Acoustic Membrane

Soudal PU AdhesiveA single part moisture curing polyurethane structural adhesive. Specifically formulated for bonding insulation to a variety of roof decks.

Tapered Systems• EcoTherm• Gradient UK• Kingspan• Rockwool

Upstand BoardsAvailable for all inverted systems.

Vapour BarriersVapour barriers are typically polythene or foil laminate sheets that resist passage of moisture through the roof deck.• Alutrix Aluminium Vapour Barrier• DuPont Airguard Smart• Visqueen

VentsDesigned to provide airflow for flat roof applications.• Glidevale • Manthorpe

Ancillaries31

Don’t get cold feet whenchoosing fl oor insulationSpeak to the experts in fl ooring insulation• Sound, impartial advice from UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via nationwide branch network• Ancillary products• Products delivered exactly where and when you need them• Vehicle fl eets with offl oad facilities• Fast, fl exible, reliable




SIGI Cold Feet Advert.indd 1 24/02/2014 15:55

FloorsInsulation

Actis Triso Sols A thin thermo-reflective insulation product for use with wet underfloor heating systems. The product can also be used below the screed on a standard floor.Standard Sizes: 1600mm x 12500mm Thickness: 7mm

Celotex FF4000A PIR insulation board specifically designed for underfloor heating systems. Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mmThickness: 50mm - 125mm

Celotex FR5000A premium performance PIR insulation board suitable for use on ground-supported, suspended concrete or timber floors, with exposed or semi-exposed intermediate concrete or timber floors.Thermal Conductivity: 0.021 W/mKStandard Sizes: 1200mm x 2400mmThickness: 25mm - 150mm

Celotex GA4000, TB4000 & XR4000Multi-purpose PIR insulation suitable for use on ground-supported, suspended concrete or timber floors, with exposed or semi-exposed intermediate concrete or timber floors. Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mm Thickness: 12mm - 200mm

Dow Floormate AA solution for insulating floors, in a range of compressive strengths (150, 300, 500 & 700). Can be installed under or over the slab in groundbearing concrete floors and is suitable for use on suspended beam and block or timber floors. Thermal Conductivity: 0.033 - 0.036 W/mKStandard Sizes: 2500mm x 600mm Thickness: 50mm - 200mm

EcoTherm Eco-VersalIdeal for solid concrete, suspended hollow pot, and suspended timber floors. This versatile product can also be used in pitched roofs, dormer cheeks and ceilings. Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mm Thickness: 25mm - 200mm

Don’t get cold feet whenchoosing fl oor insulationSpeak to the experts in fl ooring insulation• Sound, impartial advice from UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via nationwide branch network• Ancillary products• Products delivered exactly where and when you need them• Vehicle fl eets with offl oad facilities• Fast, fl exible, reliable




SIGI Cold Feet Advert.indd 1 24/02/2014 15:55

33

34


Kay Metzeler-Flooring For use on ground-supported or suspended floors and maybe installed with a concrete base with concrete, screeds or timber overlaid.EPS Grades: EPS 70, 100, 150, 200, 250, 300, 400, 500 and Kay-Cel Super PlusThermal Conductivity: 0.030 - 0.038 W/m2kStandard Sizes: 2400mm x 1200mm (Other sizes are available on request) Thickness: 20mm - 300mm

Kay Metzeler-InsuLfloor-GridThe boards have polyprolene membrane affix to the top surface, printed with a grid pattern to allow underfloor heating pipes to laid in any pattern required prior to screeding, for used before concrete floorsEPS Grades: EPS 70, 100, 150, 200, 250, 300, 400, 500 and Kay-Cel Super PlusThermal Conductivity: 0.030 - 0.038 W/m2kStandard Sizes: 1200mm x 1200mmThickness: 25mm - 300mm

Kay Metzeler-InsuLfloor-GroovedThe boards are contoured to allow the pipes to be recessed below the surface, use this product where a floating floor construction is required, different patterns and pipe sizes are available. A foil facing can also be applied to assist in the reflection and dispersion.EPS Grades: EPS 70, 100, 150, 200, 250, 300, 400, 500 and Kay-Cel Super PlusThermal Conductivity: 0.030 - 0.038 W/mkStandard Sizes: 1200mm x 1200mm Thickness: 30mm - 300mm

Kingspan® Kooltherm® K3 Floorboard Premium performance rigid thermoset insulation for use in floors.Thermal Conductivity: 0.020 - 0.022 W/mkStandard Sizes: 1200mm x 2400mm Thickness: 25mm - 150mm

Kingspan® Thermafloor® TF70A high performance, rigid PIR insulation board that can be used for both solid concrete and suspended ground floors. Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mm Thickness: 20mm - 150mm

FloorsInsulation

34

FloorsInsulation

Knauf Insulation Earthwool Acoustic Floor Slab/PlusDense rock mineral wool slab for the acoustic insulation of separating floors. Earthwool Acoustic Floor Slab Plus is an extra high dense rock mineral wool slab specifically designed to meet the requirements of a floating floor treatment for use in Robust Detail separating floors.Standard Sizes: 25mm - 50mm Thickness: 900mm - 600mm

Knauf Insulation Earthwool Acoustic Floor RollResilient, glass mineral wool roll faced on one side with a kraft paper/polythene laminate. Its facing has a75mm overlap along one edge to lap the edge of the adjoining roll.Standard Sizes: 10m x 1200mmThickness: 25mm

Knauf Insulation Earthwool Thermal Floor Slab/Plus A dense, rigid, compression resistant rock mineral wool slab designed for the thermal insulation of concrete ground floors.Thermal Conductivity: 0.035 - 0.038 W/mKStandard Sizes: 900mm x 600mmThickness: 25mm - 100mm

Knauf Insulation Polyfoam ECO Floorboard Standard/ExtraRigid extruded polystyrene (XPS) boards available in Standard and Extra grades. Certified BRE Green GuideRating of A. Suitable for almost any floor construction including; below concrete slab, screed and chipboard.Thermal Conductivity: 0.033 W/mKStandard Sizes: 2500mm x 600mm Thickness: 25mm - 75mm

Knauf Insulation Polyfoam ECO Floorboard Super Rigid extruded polystyrene (XPS) boards for the thermal and structural insulation of very high load floors.Thermal Conductivity: 0.034 - 0.036 W/mKStandard Sizes: 1250 x 600mm (lap joint)Thickness: 50 - 100mm

Recticel Eurothane GPA high performance PIR insulation board for use in solid and suspended ground floor constructions.Thermal Conductivity: 0.022 W/mK Standard Sizes: 2400mm x 1200mm Thickness: 25mm - 150mm

35


Rockwool FlexiA unique insulation product with a patented flexible edge along one side. The flexi edge allows the product to be tightly fitted between timber and metal frames and is designed for use in walls, partitions, floor and roofs.Thermal Conductivity: 0.035 W/mKStandard Sizes: 1200mm x 600mmThickness: 30mm x 200mm

Rockwool Rock Floor A tissue faced high compressive strength slab, offering a dual density thermal insulation for ground floors and acoustic insulation for separating floors.Thermal Conductivity: 0.038 W/mKStandard Sizes: 1000mm x 600mmThickness: 25mm - 150mm

Superglass Multi Acoustic RollMulti Acoustic Roll is mineral wool roll, designed to be used as an absorbent layer in timber separating floors in accordance with Part E (E&W) and Section 6 (Scot). Also meets the requirement in certain Robust Details.Width: 1200mm/2x600mm/3x400mmThickness: 60mm - 150mm

Superglass Multi Purpose Acoustic SlabMulti Purpose Acoustic Slab is mineral wool slab, designed to be used as an absorbent layer in timber separating floors in accordance with Part E (E&W) and Section 6 (Scot). Also meets the requirement in certain Robust Details.Standard Sizes: 1200mm x 600mmThickness: 50mm - 100mm

Cement A mixture of compounds used to bind materials together.

Chipboard Chipboard is created by gluing together wood particles with an adhesive, under heat and pressure. This creates a rigid board with a relatively smooth surface. Suitable for use in general building work and joinery applications.• Chipboard P5 being moisture resistant

36Floors

Ancillaries

36

Floors

Damp Proof MembranesDamp proof membranes provide safe effective basement tanking.• Tuffreel • Visqueen

Euroform Versafloor Cement bonded particleboard with tongue and grooved edges for flooring applications requiring good acoustic performance. Available in a range of finishes to suit various floor coverings. Panel Sizes: 1200mm x 600mm, 1200mm x 1200mm, 2400mm x 1200mm Panel Thicknesses: 18mm, 22mm, 24mm

Floor ScreedA multi functional product that can be used to level out a concrete floor and can be put above under floor heating, etc.

HardieBacker™ 250 Cement BoardA water-resistant tile backer board that provides a durable and stable substrate for the easy installation of tiles in a wide variety of applications. It is water-resistant and offers an excellent tile bonding surface. Cutting and installation are quick and easy using the James Hardie Score and Snap knife.

PlywoodAn uncoated softwood plywood of thick veneer with a longitudinal grain.

Protection BoardA versatile corrugated polypropylene board providing multi-surface impact protection during site works.

Insulation Support NetA net used to support insulation materials between floor rafters or in a vertical wall.

Underfloor VentilationModern construction practices have created thermally efficient buildings which require the installation of throughwall ventilation products to prevent problems caused by condensation.• Glidevale • Manthorpe

37

Speak to the experts in Drywall• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• All major drywall brands available• Comprehensive ranges via a nationwide branch network• Ancillary products• Products delivered exactly where and when you need them• Vehicle fleets with offload facilities• Fast, flexible, reliable• Speedline gypsum waste recycling service available

Beautiful finish




39Title Dry Lining

Plasterboards & Metal SystemsSIG Insulation trading companies supply a selection of British Gypsum, Knauf, Siniat and Speedline Drywall products.

Ceiling Systems• British Gypsum• Knauf • Knauf Danoline• Siniat

Drywall PlasterboardsStandard boards are available in a range of sizes which are suitable for basic drylining requirements.Fire Resistant boards are used in applications which require increased fire protection.Impact & Durability boards are used in heavy use areas where greater impact resistance is required.Moisture Resistant & Vapour boards are available in a range of sizes.Sound Resistant boards are for use where greater levels of sound insulation is required.

Metal SystemsA full range of drywall metal systems from the major branded suppliers are available from SIG Insulation.• British Gypsum• Knauf• Siniat• Speedline

Thermal LaminateThermal Laminate Boards provides a dry lining and thermal insulation solution in a single application and is suitable for internal lining of masonry walls and will assist in meeting or upgrading to the current Building Regulations. Products are available from British Gypsum, Celotex, Kingspan, Knauf, Siniat & Speedline.• British Gypsum• Celotex• EcoTherm• Kingspan• Knauf• Recticel• Siniat• Speedline

39

Title


Dry Lining

A range of boards designed for use in high performance or specialist applications.

British Gypsum Rigidur H High performance impact resistant gypsum fibre board which gives sound insulation, fire performance and fixing strength which is designed for high traffic applications.

Fermacell BoardsFermacell boards are suitable for commercial, timber frame and off site constructions. Fermacell is a unique, single-point solution to a multitude of challenges. Fermacell gypsum fibreboard is manufactured in a variety of sizes, ranging from 10mm to 18mm in square and tapered edge formats to suit all projects requirements.

Render Carrier BoardA board designed for use where there is no insulation applied to the board prior to rendering.

Tile Backer BoardsTile backer boards are water resistant boards that provide a durable and stable substrate. The boards are suitable for use when installing tiles in wet areas.• British Gypsum• James Hardie• Knauf• Marmox• Siniat

Specialist Boards40

Dry Lining

To complete drywall insulation a full range of ancillaries is available.

Access PanelsPurpose designed wall and ceiling panels for use in systems where there is a requirement to access services for maintenance.• Speedline

CompoundsJoint cements and fillers are used to bed tapes and give a smooth finish to the joints between plasterboards.• British Gypsum • Knauf• Siniat • Speedline • Versafiller

CovingCoving is available in various designs for decorative application at the junction of walls and ceilings.• Artex• British Gypsum • Siniat • Knauf

Drywall AdhesiveDrywall Adhesive is available in various designs for decorative application at the junction of walls and ceilings.• British Gypsum• Knauf• Siniat• Speedline

Finishing & PlastersPlasters are applied to masonary backgrounds to ensure a flat solid finish prior to decoration.• British Gypsum• Knauf• Siniat

Galvanised Beads and Security MeshA wide range of our Speedline beads are available for internal and external application.• British Gypsum • Knauf • Locusrite • Metal Mesh • Siniat

PVC Beads A wide range of PVC Beads are available for external rendering applications, to provide a stop to the render providing protection against impact and deflect rain water. PVC Beads can also be used as an architectural feature at each storey to provide a shadow.

Ancillaries41

42Title


Dry LiningAncillaries

Screws and Fixing ProductsA variety of screws offering optimum fixing strength and reliability including drywall, jack-point and wafer head, available for a range of applications such as metal and timber systems. Available loose in boxes or collated strips. A range of specialist fixings are also available, to suit the range of specialist boards.• British Gypsum• Knauf• Siniat• Speedline

TapesA range of products used in the application of skim plasters and taping and jointing materials. Tapes are used to strengthen the joints between plasterboard or for remedial applications.• British Gypsum• Knauf• Siniat• Speedline

42

Puzzled by Insulation?Speak to the experts in Insulation• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fleets with off-load facilities• Fast, flexible, reliable• Ancillary products




SIGI Crossword Advert Resize 14/01/14.indd 1 04/03/2014 11:21

44TitleTimber Frame


Insulation

Actis Boost’r Hybrid Insulating MembraneA reflective breathable membrane with a built-in thermal performance for use on the cold side of the building fabric in timber frame structure.Thermal Performance: R = 2.4m².K/W (EN 16012 with 2 air voids) Standard Sizes: 1500mm x 6700mm rolls Thickness: 35mm

Actis Hybris InsulationA unique honeycombed pattern insulation material for walls. High thermal performance. Thermal Conductivity: 0.033 W/mKStandard Sizes: 1200mm wide rolls Thickness: 45 - 135mm

Actis HControl Hybrid Insulating Vapour BarrierA reflective vapour control layer with built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in timber frame structure. Thermal Performance: R = 3.2m².K/W (EN 16012 with 2 air voids) Standard Sizes: 1600mm x 6250mm rollsThickness: 45mm

Celotex GA4000, TB4000 & XR4000 A PIR insulation board for use in timber frame systems supported with BBA certification. The product can be used between studs or as an insulated lining, an insulated sheathing or as part of a system incorporating any combination of these options.Thermal Conductivity: 0.022 W/mKStandard Sizes: 2400mm x 1200mmThickness: 12mm - 200mm

Isover Timber Frame Batts and RollsA glass mineral wool batt/roll providing thermal and acoustic insulation for timber external and separating walls to help meet Building Regulations Approved Document L (England and Wales) and Section 6 (Scotland). The batts push-fit between 600mm stud centres making them easy to install. Two batts end-to-end typically fit standard storey height.Thermal Conductivity: 0.032 - 0.043 W/mKStandard Sizes: 1175mm x 570mm Thickness: 50mm - 140mm

44

45Title Timber Frame

Kingspan® Kooltherm® K12 Framing Board Premium performance rigid thermoset insulation for timber and steel framing systems.Thermal Conductivity: 0.020 - 0.023 W/mKStandard Sizes: 2400mm x 1200mmThickness: 25mm - 150mm

Kingspan® Thermawall® TW55A high performance rigid PIR insulation for timber and steel framing systems. The board may be installed either between or outside timber studwork. Thermal Conductivity: 0.022 W/mKStandard Sizes: 1200mm x 2400mm Thickness: 20mm - 150mm

Knauf Insulation Earthwool Flexible SlabMulti-purpose, flexible, non combustible, rock mineral wool slab specifically designed for installation by friction fitting.Thermal Conductivity: 0.035 to 0.037 W/mKStandard sizes: 1200mm x 600mm / 1200mm x 400mm Thickness: 50mm - 140mm

Knauf Insulation Earthwool FrameTherm Roll 40/35/32 A specialist product for timber frame construction. FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters, are available in a range of thermal conductivities to provide design flexibility and have an unbeatable A1 fire classification. Rolls are fully cut into 2 x570mm to suit commonly used timber spacings.Thermal Conductivity: 0.032 - 0.040 W/mKStandard Sizes: 2 x 570mm wide at various roll lengths according to thickness and lambda valueThickness: 90mm - 140mm

Knauf Insulation Earthwool FrameTherm Slab 38/35/32For the thermal and acoustic insulation of external and separating walls in timber frame construction, and also in ‘warm roof’ construction. Earthwool FrameTherm slabs are used for ‘friction fitting’ between timber studs and rafters, are available in a range of thermal conductivities to provide design flexibility and have an unbeatable A1 fire classification.Thermal Conductivity: 0.032 - 0.038 W/mKStandard Sizes: 570mm x 1170mmThickness: 90mm - 140mm

Knauf Insulation Earthwool Timber Frame Party Wall SlabA full fill thermal and acoustic solution for the thermal insulation of timber frame party walls to help reduceparty wall bypass and is designed for use in Robust Detail wall constructions.Allows a zero-effective U-value to be inputted into SAP calculations.Dimensions: 1200mm x 600mmThickness: 60mm / 85mm / 110mm

45

46TitleTimber Frame


Insulation

Recticel Eurothane GP A high performance PIR insulation board for use in timber framed constructions. Thermal Conductivity: 0.022 W/mKStandard sizes: 2400mm x 1200mm Thickness: 25mm - 150mm

Superglass TF Party Wall RollTF party wall Roll is a mineral wool product designed for use within timber frame party or separating walls as described with ADL1 (E &W) and Section 6 (Scotland) respectively. Standard Sizes: 10.5m x 2mm x 675mm Thickness: 60mm

Superglass Timber & Rafter Roll 32-44Timber & Rafter Roll is a mineral wool roll, designed to give thermal and acoustic insulation for room in a roof applications in timber-framed buildings. The rolls are self-supported by friction fitting between timber studs.Thermal Conductivity: 0.032 - 0.044 W/mKWidth: 2m x 570mm and 3m x 370mmLength: 1175mmThickness: 50mm - 200mm

Superglass Timber & Rafter Batt 32-44Timber & Rafter Roll is a mineral wool roll, designed to give thermal and acoustic insulation for room in a roof applications in timber-framed buildings. The rolls are self-supported by friction fitting between timber studs.Thermal Conductivity: 0.032 - 0.044 W/mKStandard Sizes: 1175mm x 570mmThickness: 50mm - 200mm

46

47Title Timber Frame

Ancillaries

Breathable MembranesProvide protection for timber against wind-driven rain, snow and dust, during construction whilst allowing the timber to breath.• Dupont Tyvek Reflex • DuPont Tyvek Soft • DuPont Tyvek Housewrap • DuPont Tyvek Façade• DuPont Tyvek Supro • Isover Vario Membrane • TF200

Builder’s Metalwork• Joist Hangers• Angle Brackets• Truss Clips• Restraint Straps

Mayplas 551 Timber Frame Cavity BarrierA fire and acoustic cavity barrier intended for installation between the inner timber frame and outer masonry skin. 551 Timber Frame Cavity Barrier will accommodate a maximum cavity width of 175mm.

Vapour Control LayersSpecifically designed to be applied to the warm side of insulation behind wall linings.• Actis HCONTROL REFLEX+ • DuPont AirGuard Control • DuPont AirGuard Reflective • DuPont AirGuard Smart

Wood Glue• Everbuild • Bostik

Other Timber Frame Slab & Roll Ranges are available.

47

Need sound advice on party walls?Speak to the experts in Acoustic Insulation Solutions• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products




13530 SIGI Party Wall Ad.indd 1 24/02/2014 16:14

49Title Acoustics

Isover APR 1200 A glass mineral wool roll providing high levels of acoustic insulation in partitions, walls and floors to meet acoustic requirements in domestic and non-residential applications. The product carries a system lifetime performance guarantee when used in British Gypsum SpecSure warranted drywall and floor systems. The rolls push-fit between 600mm stud centres making it easy to install.Standard Sizes: 9170mm - 20000mm x 1200mmThickness: 25mm - 100mm

Knauf Insulation Earthwool Acoustic RollFlexible glass mineral wool quilt which is lightweight, flexible, resilient and non-combustible, and designed to provide acoustic performance. Standard Sizes: 100mm thickness - 9.17m 2 x 600mm 100mm thickness - 9.17m; 3 x 400mm 75mm thickness - 12.50m; 2 x 600mm 50mm thickness - 13.00m; 2 x 600mm 25mm thickness - 10.00m; 4 x 600mm

Superglass Multi Acoustic RollMulti Acoustic Roll is lightweight, flexible roll of mineral wool, designed to be used as an absorbent layer in timber and metal stud partitions and in separating wall and floors in accordance with Part E (England & Wales) and Section 5 (Scotland) acoustic requirements. Multi Acoustic roll also meets the requirements in certain Robust Details.Standard Sizes: 1200mm, 2mm x 600mm, 3mm x 400mm Thickness: 60mm - 100mmLength: 9.17m - 11.25m

Party Wall

Regupol E48 Acoustic UnderscreedRecycled tyre crumb acoustic underscreed insulation for use with beam and block subfloors. Robust Detail E-FC-6 Approved.Roll Size: 8mm x 1150mm x 13000mm

Cellecta YELOfon HD10+Is a high density, non-cross-linked, polyethylene resilient layer system, it carries its own proprietary Robust detail E-FC-5 and is the ultimate sound proofing with unrivalled acoustic performance when used to isolate floating screed from structural concrete floors.Standard Size: 1.5m x 33.33mThickness: 10mm

FlooringNeed sound advice on party walls?Speak to the experts in Acoustic Insulation Solutions• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fl eets with off-load facilities• Fast, fl exible, reliable• Ancillary products




13530 SIGI Party Wall Ad.indd 1 24/02/2014 16:14

49

50TitleAcoustics


Acoustilay Perfect for sound insulating floors in domestic situations and can be used above most Lath and Plaster and resiliently fixed, double plasterboarded ceilings to bring the overall floor/ceiling construction up to the standards of Approved Document E (2003).Sheet Sizes: 10mm x 1200mm x 1200mm 12mm x 1200mm x 1200mm 15mm x 1200mm x 1200mm

Fellert ‘Even Better’ Spray Applied Acoustic Plastering SystemHigh quality plastering system that absorbs unwanted noise in a wide range of environments. As an acoustic solution it has a highly absorbent effect that allows optimum acoustic control in large commercial spaces.

Jumpax Acoustic, fast track floor preparation system for the glue-down of all resilient floor coverings such as sheet vinyl, LVTs, linoleum, cork, rubber, carpet and carpet tiles. It can be used over almost any type of floor construction as well as on underfloor heating. Only 10mm thick it produces a highly professional smooth finish.Panel Size: 10mm x 600mm x 1200mmPack Contents: 4 base and 4 top boards (2.88m2)

Karma AcoustiwallAcoustic wall treatment which is ideal for reducing sound transmission through block, brick or stud walls. It comprises 15mm fire resistant plasterboard bonded to a laminated acoustic layer. It is fixed to existing walls or studs using mechanical fixings and is immediately ready for decoration.Panel Size: 30mm x 1200mm x 1200mm

Karma Acoustic Blanket An innovative acoustic quilt which consists of an acoustic barrier membrane sandwiched between two layers of 25mm mineral wool. Suitable for use in refurbishment projects where access is only available from one side or where existing flooring and finishing products are to remain.Standard Sizes: 52mm x 1200mm x 5m 52mm x 600mm x 5m 52mm x 400mm x 5m

Karma Acoustic EasyPanel A sustainable product which provides high levels of airborne and impact sound insulation in a single board, suitable for use in refurbishment projects where there are problems with door thresholds and lifting skirting.Standard Sizes: 15mm x 800mm x 1200mm

Karma Acoustic Overlay 23Overlay board designed to be laid above a timber deck to reduce impact and airborne sound transmission. It consists of 18mm T&G4 chipboard laminated to a 5mm closed cell polyethylene resilient layer.Panel Size: 23mm x 600mm x 2400mm

Insulation50

51Title Acoustics

Karma Acoustic OverlayPlus 26 Overlay board intended to be laid over a timber deck to reduce impact and airborne sound. It consists of 18mm T&G4 chipboard laminated to a 8mm recycled foam resilient layer and provides slightly better impact performance than Karma Acoustic Overlay 23.Panel Size: 28mm x 600mm x 2400mm

Karma Lewis SheetingRolled self-supporting, dovetailed steel reinforcement sheets which are used for reinforcing thin-screeded floors on timber-joisted floors. By adding special resilient layers under the sheets, excellent acoustic performance can be achieved while providing all the benefits of a screeded surface.Sheet Size: 2500mm x 630mmEffective Width: 580mm / 610mm (Depending on overlap)

Karma Masspanel with TNF 70 Fire Retardant SlabProvides excellent acoustic performance and comprises 18mm cement particleboard T&G4 bonded to a 12mm thick woodfibre layer. It is laid above a timber deck. TNF 70 slab is a high density stone fibre slab with a smoke- and fire-resistant coating. It is friction fitted between joists and sealed with a Karma EX240 intumescent and acoustic mastic.Panel Size: 30mm x 600mm x 1200mm

Karma Soundlay 9Consists of a layer of acoustic barrier laminated to a 6mm layer of Class ‘0’ foam. It is a thinner solution but provides slightly less mass than Karma Soundlay 15. It is primarily used on concrete floor applications.Sheet Size: 9mm x 1000mm x 1200mm

Karma Soundlay 15An overlay treatment comprising two layers of dense acoustic barrier and an 8mm recycled acoustic chipfoam. It is used primarily to reduce impact sound but in timber floors can improve the airborne sound performance as well. It can be used in place of carpet underlay and with simple preparation also under laminates and vinyl.Sheet Size: 15mm x 1000mm x 1200mm

Karma Joistdeck 37High performance overlay board designed to be installed directly on to joists with a resilient acoustic ceiling system below. It comprises 22mm T&G4 chipboard laminated to a 15mm chipfoam resilient layer.Panel Size: 37mm x 600mm x 2400mm

Maxi 60 CeilingHigh density composite building board which can be installed onto a ceiling in order to meet Approved Document E and can provide 1 hour fire protection when fitted with appropriate mineral wool slabs and accessories. It can meet Part E of the Building Regulations without the need to upgrade the floor above.Panel Size: 1200 x 600 x 17mm

Park Bearer Acoustic Floor Bearer for Soundproofing Concrete Floors, they provide effective impact and airborne sound insulation on concrete separating floors. Approved FFT1 and FFT3 bearer in many concrete Robust Details.Standard Heights: 31mm, 45mm, 50mm, 54mm, 61mm and 70mm

51

Title


Reduc Foundation 35 and 39 Acoustic overlay board designed to attenuate impact and airborne sound passing through existing timber floors and can be laid direct to joists. It comprises two layers of moisture resistant chipboard, separated by viscoelastic sound damping strips with an acoustic felt resilient layer on the underside.Panel Sizes: 35mm x 600mm x 2400mm 39mm x 600mm x 2400mm

Reduc Micro 17/Micro 21 Shallow acoustic overlay boards designed to dampen vibration and attenuate impact and airborne sound passing through floors with minimum loss of room height. They comprise substrate layers of moisture-resistant MDF combined with either fibreboard (17) or cement particle board (21) separated by sound damping strips. A resilient layer of acoustic felt is adhered to the underside.Panel Sizes: 17mm x 575mm x 1175mm 21mm x 575mm x 1175mm

Reduc Strata/Strata ExtraAcoustic overlay boards designed to attenuate impact and airborne sound passing through existing timber floors. The top layer of moisture-resistant MDF is separated from the bottom layer of chipboard (Strata) or cement particle board (Strata Extra) by viscoelastic sound damping strips. A resilient layer of acoustic felt is adhered to the underside.Panel Size: 35mm x 575mm x 1175mm

Reflex Bearer Acoustic Floor Bearer for Soundproofing Timber Floors, they provide effective impact and airborne sound insulation on timber separating floors. Approved FFT1 and FFT3 bearer in many Robust Details.Standard Heights: 53mm, 62mm and 78mm

Regupol 3912 Acoustic Underlayment Tough and durable PUR foam underlayment product designed for refurbishment of timber floors as it can be bonded to all types of base floors.Roll Size: 6mm x 1000mm x 15000mm

Regupol 4515 Eco Soundproof UnderlayTough resilient low-cost acoustic underlayment manufactured from a combination of cork granules and rubber granulate. Designed to attenuate impact sound at source on all types of subfloor. Roll Size: 3mm x 1000mm x 20000mm 4.5mm x 1000mm x 12000mm

Regupol 4515 Multi Acoustic UnderlayTough resilient acoustic underlay manufactured from PUR Foam and cork granules suitable for use with concrete subfloors. Compatible with all types of floor finishes including ceramic tiles, sheet vinyl and vinyl tiles, wood and laminates, carpet and marmoleum/linoleum.Roll Size: 3/4.5mm x 1000mm x 18000mm

Insulation

Acoustics52

Title

Regupol 6010BA Acoustic UnderscreedRecycled tyre crumb acoustic underscreed insulation for use with pre-cast or beam and block subfloors.Roll Size: 17mm x 1250mm x 10000mm

Regupol 6010SH Acoustic UnderscreedRecycled tyre crumb acoustic underscreed designed for use where very high loads are apparent yet acoustic performance is critical. Suitable for use with pre-cast subfloors.Roll Size: 10/15mm x 1250mm x 10000mm

Regupol 7210C Acoustic UnderscreedAcoustic Resilient Layer is a cost-effective rubber bound product for use with pre-cast and cast in-situ subfloors. Manufactured from recycled materials.Roll Size: 5mm x 1150mm x 2250mm

Regupol Quietlay Acoustic UnderscreedA cost effective rubber-bound product suitable for use with pre-cast subfloors. Manufactured from recycled materials. Robust Detail E-FC-15 Approved.Sheet Size: 5mm x 1150mm x 2250mm

Rockwool Acoustic Slab Rockwool Acoustic Slab is a high quality resin bonded semi-rigid slab, designed to combine optimum acoustic and fire performance with easy fitting into metal partitions.Thermal Conductivity: 0.037 W/mKStandard Sizes: 1200mm x 590mmThickness: 25mm, 47mm, 67mm

Saddle SystemAcoustic Levelling System for Uneven Concrete Floors; contributes significantly to the reduction of impact and airborne sound through party floors. It complies as an FFT2 floor in many Robust Detail floors and Scottish Section 5 Example Constructions.

SoundblockerAcoustic treatment for suspended ceilings where there is poor sound insulation. Simply installed onto the back of suspended ceiling tiles, Soundblockers provide a rapid and effective means of improving sound insulation, reducing “crosstalk” from adjacent spaces.Panel Size: 600mm x 600mm x 16mm, 19mm, 25mm & 75mm 1200mm x 600mm x 16mm, 19mm, 25mm & 75mm

SoundDeck CLD System and SoundDeck HangersA fast-track acoustic floor and ceiling system comprising a timber based, high performance overlay board and an innovative acoustic ceiling hanger to provide exceptional acoustic performance in new build timber frame apartments.

Acoustics53

54Title


SoundDeck Overlay Acoustic Floor BoardsAcoustic floor boards comprise a resilient layer pre-bonded to 18mm or 22mm tongue-and-groove flooring grade chipboard designed to reduce impact sound. They can be used as an acoustic overlay for refurbishments and RD concrete subfloors.Sheet Sizes: 26mm x 600mm x 2400mm 30mm x 600mm x 2400mm

Soundlay E - Economic Soundproof Overlay MaterialAcoustic barrier material used to reduce impact noise in floating floor applications. The material is based on a very flexible viscoelastic mass with various fillers of varying granularity laminated with an open-cell regenerated PU foam.Sheet Sizes: 6mm x 1050mm x 1200mm

SteicofloorAcoustic underlay system suitable for installing 14mm engineered flooring over a concrete or timber joist separating floor. It offers a stable underfloor with high thermal insulation and outstanding levelling abilities. Flooring is fixed to a timber profile which is isolated from the base floor.Panel Size: 40mm x 380mm x 1200mmProfile Size: 35mm x 50mm x 2000mm

SuperPhon Acoustic Wall PanelsA fabric-covered solution for reducing sound reverberation, this product provides up to Class A performance and is available in a wide range of colours. Ideal for schools, auditoria and recording studios. Can be manufactured to bespoke sizes.Panel Sizes: 25mm and 50mm (thick) and 1200mm x 1200mm-3000mm (standard sizes)

SuperPhon High Impact Ceiling Grid and Walls PanelsThese products provide all the benefits of SuperPhon but have been developed for use in areas of high traffic and areas where surface impact is a common risk.Panel Sizes for Ceiling Grid System: 50mm x 1200mm x 600mmPanel Sizes for High Impact Wall Panels: 25mm/37mm/62mm (thick) x up to 3000mm x 1200mm

SuperPhon – PhotoPhonAs SuperPhon, but with the option to apply any image to the panel. Supply your own high-resolution image or allow us to design something for you.

SuperPhon Suspended Ceiling AbsorbersAs SuperPhon acoustic wall panel but suspended from ceiling, making them ideal for environments where soundproofing solutions need to be out of reach (e.g. sports hall). Can be manufactured to bespoke sizes.Panel Sizes: 25mm and 50mm (thick) and 1200mm-1800mm x 300mm-600mm (standard sizes)

Insulation

Acoustics54

55Title Acoustics

Ancillaries

CMS Bond Adhesive CMS Bond Adhesive is a solvent-free, low-VOC, high-performance water-based acrylic dispersion with very good bond strength. It is suitable for plasticized vinyl floor coverings (including PVC tiles) together with high density foam backed carpets.

Karma Isomax Clips and Channel High performance solution to isolating walls. Attaching the Karma Isomax Clip to timber or metal studs or to masonry simply secures the drywall furring channel and decouples the gypsum boards from the rest of the structure.Isomax Clips: 98mm long x 25mm deepIsomax Channel: 3600mm long

Karma Acoustic Perimeter Strip100% recyclable non-crosslinked polyethylene foam designed to prevent any flanking transmission and maintain the acoustic integrity of a structure.

Karma Acoustic Pipe WrapUsed where service pipes pass through separating floors to reduce sound transmission between adjacent floors and dwellings.

Karma EcopearlsEcological levelling grain comprising natural woodchips and mineral aggregates. They provide a fast track dry-levelling solution taking out subfloor deviations from as little as 2mm.They provide an ideal base for overlay boards where the base floor is uneven and are very easy to use.Coverage: 3.7kg provides 10mm per m2

Karma Putty PadsAn acoustic, intumescent putty pad designed for lining electrical socket boxes in partition wall constructions, to reduce sound travel.

Karma PVA Adhesive (D3)Karma D3 adhesive is a high quality, resin based wood adhesive which provides a high strength impact-resistant bond. It conforms to the international standard EN204 (D3) and BS 4071 for creep resistance and is supplied in 1 litre bottles.

Mayplas SD5 & SD10 Sound Deadening Foam

Speedline Acoustic SealantAcoustic sealants are intended for sealing low movement joints providing effective noise reduction.

55

Don’t be alarmed




Speak to the experts in Fire Protection products• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fleets with off-load facilities• Fast, flexible, reliable• Ancillary products

SIGI Fire Protection Advert v3.indd 1 10/04/2014 09:19

57Title Fire Protection

AIM Fire Stop StripsFire rating: Up to 4 hours fire performance Standard Sizes: 10mm - 100mm void

AIM Fire Stop BlocksFire rating: Up to 4 hours fire performance Standard Sizes: Manufactured to suit a trapezoidal profile

AIM Wall Cavity Fire BarrierFire Resistance: Thickness of Fire Barrier: 60 minutes 75mm (up to 300mm cavity) 100mm (301mm to 600mm cavity)120 minutes 100mm (lap joint) 240 minutes 100mm EHD* (lap joint) *EHD = Extra high density barrier

AIM Partition Head Fire BarrierFire rating: Up to 4 hours fire performance Standard Sizes: 101mm - 600mm void

AIM Raised Access Floor Fire BarrierFire rating: Up to 4 hours fire performance Standard Sizes: 50mm - 1000mm void

British Gypsum Glasroc F High performance, non-combustible glass reinforced gypsum board for structural steel encasement systems. Fire rating: Up to 180minsStandard Sizes: 1.2m x 2.4m in 15mm and 1.2m x 2m in 20mm, 25mm & 30mm thicknesses

Culimeta-Saveguard Firehalt SFLightweight flexible fire barrier/curtain.Fire rating: 120 minutes integrityStandard Sizes: 0.5m 1.2m x 25m

Culimeta-Saveguard Firehalt 60/30Lightweight flexible fire barrier/curtain.Fire rating: 60 minutes integrity & 30 minutes insulationStandard Sizes: 8mm x 1.2m x 7m

Culimeta-Saveguard Firehalt 120/30 GoldLightweight flexible fire barrier/curtain.Fire rating: 120 minutes integrity & 30 minutes insulationStandard Sizes: 8mm x 1.2m x 7m

Culimeta-Saveguard Firehalt 120/60Lightweight flexible fire barrier/curtain.Fire rating: 120 minutes integrity & 60 minutes insulationStandard Sizes: 16mm x 1.2m x 5m

Insulation57

Don’t be alarmed




Speak to the experts in Fire Protection products• All major insulation brands available• Sound, impartial advice from the UK market leader• Technical, specialist expertise and legislation guidance• Comprehensive ranges via our nationwide branch network• Products delivered exactly where and when you need them• Vehicle fleets with off-load facilities• Fast, flexible, reliable• Ancillary products

SIGI Fire Protection Advert v3.indd 1 10/04/2014 09:19

58TitleFire Protection


Insulation

Euroform VersafireA1 Non-Combustible board in accordance with BS EN 1716:2002 and 1182:2002 and is intended for use in both internal and external applications.Panel Size: 2400mm x 1200mm*Panel Thicknesses: 6mm, 9mm, 12mm*Fabrication service available

Isover ULTIMATE Cavity BarriersA multi-purpose insulation products providing fire,acoustic and thermal performance in concealed wall cavities. Conforms to building regulation definitions of a cavity barrier, cavity stop, flexible closer and effective edge sealing. Fire rating: Up to 120 minutesStandard Sizes: 50 - 100mm cavities

Knauf Insulation Rocksilk PyroDuct SlabA fire resistant rock mineral wool slab with a factory applied facing for the protection of HVAC steel ductwork. Used in areas where hygiene is key, such as clean rooms or kitchens.Thermal Conductivity: 0.037 W/mKStandard Sizes: 1200mm x 600mm Thickness: 45mm and 90mm

Knauf Insulation Rocksilk FireTech SlabHigh density, resilient and non-combustible rock mineral wool slab. It is available un-faced or faced with a Bright Class ‘O’ reinforced aluminium foil. It is also available tissue faced, subject to enquiry.Thermal Conductivity: N/AStandard Sizes: 1800mm x 1200mm Thickness: 20mm - 60mm

Promat MASTERBOARD®

A class 0, moisture resistant calcium silicate building board. Fire rating: Up to 30 minutesStandard Sizes: 2440mm x 1220mm, 2500mm x 1200mm Thickness: 6mm, 9mm, 12mm

Promat PROMATECT®-HDA high density, calcium silicate board which is suitable for external use and can withstand impact and abrasion. Standard Size: 2440mm x 1220mm Thickness: 6mm and 9mm

Promat PROMATECT®-L500A low density calcium silicate board, used for the construction of fire resistant ducts.Fire rating: Up to 240 minutes Standard size: 2500mm x 1200mm Thickness: 20mm - 52mm

58


Promat SUPALUX®

A non-combustible, moisture resistant calcium silicate building board. Fire rating: Up to 240 minutesStandard Sizes: 2440mm x 1220mm, 2500mm x 1200mm Thickness: 6mm - 25mm

Promat SUPALUX® Bevelled Edge Ceiling TilesNon-combustible ceiling tiles and panels for fire protection to timber floors and structural steel beam support. Fire rating: Up to 120 minutesStandard Sizes: 600mm x 600mm 610mm x 610mm 1200mm x 600mm 1220mm x 610mm 1200mm x 1200mm 1220mm x 1220mm Thickness: 9mm - 12mm

Promat SUPALUX® Door FacingsA non-combustible, calcium silicate door facing for fire upgrade to doors. Fire rating: Up to 30 minutesStandard Sizes: 2134mm x 914mm Thickness: 6mm

Promat TL Board® A calcium silicate board bonded to phenolic insulation, designed to be fixed to the underside of floors to achieve specific U-values required by the project design and Building Regulations. Thermal Conductivity of the bonded insulant: 0.20 W/mk Standard Sizes: 2397mm x 1197mm Thickness: 76mm - 126mm

Promat VERMICULUX®

A non-combustible, fire resistant board. Typical applications: Fire Protection to Structural steelwork/Fire protection upgrade of concrete structures.Fire rating: Up to 240 mins Standard size: 1220mm x 1220mm Thickness: 20mm - 60mm

Rockwool Ablative Coated BattFire and acoustic barriers for voids created by the passage of services in both dry wall systems and masonry walls and floors. Fire rating: Up to 4 hoursStandard Sizes: 50mm x 1200mm x 600mm 60mm x 1200mm x 600mm

Rockwool Ablative CoatingSuitable for sealing joints and service penetrations in fire walls, partitions, fire rated door frames and glazing systems.Fire rating: Up to 4 hoursStandard Sizes: 5 litre drum

59



Insulation

Rockwool BEAMCLAD® systems (previously Conlit 150)They embody a complete ‘tool-box’ of options to offer contractors simple and economical fire protection solutions to the very real diversity of modern steel constructions.Fire rating: Up to 4 hoursStandard Sizes: 2000mm x 1200mm

Rockwool Fire BarrierRockwool Fire Barrier Systems offer labour saving solutions to prevent fire and smoke spread within roof and ceiling voids.

Rockwool Fire Barrier SystemsOffers labour-saving solutions to prevent fire and smoke spread within roof and ceiling voids for all general conditions encountered on site. The vertically hung Fire Barriers are capable of achieving both integrity and insulation protection periods from 15 to 120 minutes.Fire rating: Up to 4 hoursStandard sizes: 1000mm x 600mm

Rockwool Fire CompoundFirestop Compound is a specially formulated gypsum based compound, which is mixed with water to be trowelled or poured around service penetrations. Used to provide a fire resisting seal around service penetrations in fire rated walls and floors. Tested to BS476 Part 20, 1987.Fire rating: Up to 6 hoursStandard Sizes: 22Kg Bag (unmixed)

Rockwool Fire Duct SystemAs part of the comprehensive ROCKWOOL FIREPRO® range of fire protection products, Fire Duct Systems (previously Conlit® Ductwork Systems) provide fire protection and thermal and acoustic insulation for circular and rectangular steel ductwork.

Rockwool Fire Rated SiliconeFor sealing linear gaps between masonry constructions.Fire rating: Up to 4 hoursStandard Sizes: 310ml

Rockwool Fire TubeFire Tube is a rigid pre-formed cylindrical section of Rockwool® specially engineered to provide cellulosic protection to circular section structural steel, and to process, sprinkler and service pipes. In addition to fire protectionb, Fire Tube provides a high degree of thermal and acoustic insulation.

Rockwool Firestop Pipe Collars Provide a simple and effective method of firestopping plastic pipework where it passes through fire resistant walls and floors in a retrofit situation. Tested to BS476 Part 20, Firestop Pipe Collars provides up to 4 hours fire protection.Fire rating: Up to 4 hoursStandard Sizes: 55mm to 355mm O.D. Pipes

60


Rockwool Insulated Fire SleevesInsulated Fire Sleeves are a unique combination of Rockwool® and a graphite intumescant that provide all the thermal, acoustic and fire benefits of Rockwool® with an added intumescant effect.

Rockwool Intumescent Pillows A temporary firestop solution for large voids in walls & floors, tested to BS 476:part 20 to provide up to 4 hours fire protection to metal services and cables passing through fire resisting compartment floors and walls.Fire rating: Up to 4 hoursStandard Sizes: 300mm x 30mm

Rockwool Linear and Trapezoidal Firestops RW Linear and Trapezoidal Firestops provide up to 4 hours firestopping at the junctions of compartments walls and floors.

Rockwool Multi-Cable Firestop Designed to effectively seal cable bunches, Multi-Cable Firestop is a fire resistant foam laminated both sides with an intumescant polymer.

Rockwool PWCB provide effective perimeter edge sealing that help minmise air leakage and heat loss between the external cavity and seperating party wall. RW PWCB provides compliance with fire safety, acoustic flanking and thermal bypass in a single product. Fire rating: Up to 1 hourStandard Sizes: Cavity widths 50-150mm

Rockwool Soffit Slab Consists of a non-combustible rigid ROCKWOOL® board with a variety of facings and is particularly suited for providing cost effective fire resistance and thermal insulation through concrete car park soffits and similar applications.Fire rating: Up to 4 hoursStandard Sizes: 1000mm x 600mm

Rockwool SP Firestop SlabA product specifically designed to form cavity fire stops within buildings.Fire rating: Up to 2 hoursStandard Sizes: 1000mm x 650mm

Rockwool TCBsRockwool Cavity Barriers are designed to prevent the spread of fire through concealed cavities. They have been tested and assessed for up to 60mins fire resistance (integrity and insulation).Fire rating: Up to 1 hourStandard Sizes: Cavity widths 50-150mm

Ultra Universal Pipe WrapInnovative and cost effective method of fire sealing all plastic pipes. Ultra Universal Pipe Wrap is capable of expanding over 30 times its thickness to crush and close off the pipe in a fire situation.Fire rating: Up to 4 hoursStandard Sizes: 2.1mm x 130mm x 1m

61



Insulation

Ancillaries

Ultra Universal Pipe SleeveUltra Universal Pipe Sleeve is a revolutionary product incorporating the performance benefits of Ultra Universal Pipe Wrap, as well as a wider scope of application. This includes all Plastic Pipes as well as Phenolic Insulated Pipes from OD sized up to 168mm and insulation thickness up to 40mm.No cut back required of the phenolic insulation is required to achieve the necessary level of fire resistance.Fire rating: Up to 2 hoursStandard Sizes: 2.1mm x 130mm x 1m

62

Rockwool Firepro GlueFirePro Gule has been specially deveoped for fixing RW fire protection systems.

Rockwool Firestop High Expansion Intumescent Sealant High Expansion Intumescant Sealant expands at temperatures above 135c sealing around penetrations and services to prevent the passage of smoke and flame.

Rockwool High Expansion SealantEasy to apply water based acrylic emulsion sealant containing graphite. It expands at temperatures above 135ºc sealing around various penetrations and services to prevent the passage of smoke and flames.Fire rating: Up to 4 hoursStandard Sizes: 310ml Sealant Tube

Rockwool Intumescent & Acoustic SealantSuitable for sealing joints and service penetrations in fire walls, partitions, fire rated door frames and glazing systems. Fire rating: Up to 4 hoursStandard Sizes: 310ml & 600ml foil packs

Rockwool Intumescent Expansion Joint SealIntumescant Expansion Joint Seal is a compressible strip formed by Shrink Wrapping an Intumescant Polymer to a Rockwool® core.

Rockwool Intumescent Putty Pads Developed for use in plasterboard partitions that have been partially penetrated by electrical socket boxes. They are designed to maintain acoustic integrity and fire resistance.Fire rating: Up to 2 hoursStandard Sizes: To suit single or double gang electric boxes.

Ultra Fire Rated Intumescent Acoustic Acrylic SealantA halogen free, polymer emulsion based sealant that swells when subjected to temperatures in excess of 125oC and forms a char coat that restricts the passage of smoke and fire.Fire rating: Up to 4 hoursStandard Sizes: 310ml Sealant Tube

DuPonttM aiRguaRD®

A strong AVCL family to build airtight and condensation free

Copyright © 2013 DuPont. All rights reserved. The DuPont Oval Logo, DuPontTM, The miracles of scienceTM, Tyvek® and AirGuard® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates.

For more information, visit: www.construction.tyvek.co.uk

• Highly vapour resistant• Airtight and Moisture resistant• Superior mechanical strength• Reaction to Fire: Class E*• Reduces risk of condensation into the insulation• Reduces convective heat losses• Easy to install - suitable for use in roof or wall constructions• DuPontTM AirGuard® Reflective reflects ca. 95% of radiant heat

1 Aberdeen Tel: 01224 825825 Fax: 01224 8228922 Bedford

Tel: 01234 761100 Fax: 01234 2721573 Birmingham

Tel: 0121 665 3050 Fax: 0121 665 30754 Bridgwater

Tel: 01278 686000 Fax: 01278 6860065 Brighton

Tel: 01273 878700 Fax: 01273 8787046 Bristol

Tel: 0117 931 3400 Fax: 0117 931 34117 Burton-on-Trent

Tel: 01283 643790 Fax: 01283 5091048 Cardiff

Tel: 029 2066 2900 Fax: 029 2066 29119 Chesterfield

Tel: 01246 450505 Fax: 01246 45615610 Colchester Tel: 01206 214600 Fax: 01206 21461011 Coventry Tel: 02476 644373 Fax: 02476 64458812 Crewe Tel: 01270 530800 Fax: 01270 58919613 Eurocentral Tel: 01698 833755 Fax: 01698 73304814 Heathrow Tel: 01753 689200 Fax: 01753 68162315 Inverness Tel: 01463 701200 Fax: 01463 70120116 Lancing Tel: 01903 755876 Fax: 01903 823298

17 Leeds Tel: 0113 385 7700 Fax: 0113 385 770118 Leicester Tel: 0116 232 5019 Fax: 0116 232 501819 Leominster Tel: 01568 708888 Fax: 01568 70818120 Liverpool Tel: 0151 547 7680 Fax: 0151 547 768121 London East - Barking Tel: 020 8477 9500 Fax: 020 8477 950122 London East - Solent Tel: 020 8556 4411 Fax: 020 8556 447223 London West - Ruislip Tel: 020 8839 4321 Fax: 020 8839 430124 London West - Brentford Tel: 020 8232 8509 Fax: 020 8568 405925 Loughborough Tel: 01509 231891 Fax: 01509 23286926 Manchester Tel: 0161 876 4776 Fax: 0161 876 477527 Norwich Tel: 01603 765660 Fax: 01603 22600028 Oxford Tel: 01993 700993 Fax: 01993 70899329 Peterborough Tel: 01733 202299 Fax: 01733 20840130 Plymouth Tel: 01752 675400 Fax: 01752 67541931 Sheffield Tel: 0114 241 3000 Fax: 0114 241 300132 Solent Tel: 023 8074 3946 Fax: 023 8074 3947

33 Southampton Tel: 023 8074 0074 Fax: 023 8074 012234 Stirling - (Clyde) Tel: 01786 849100 Fax: 01786 84994035 Tonbridge Tel: 01732 370500 Fax: 01732 370530

36 Tyneside Tel: 0191 226 3110 Fax: 0191 226 311137 Wolverhampton Tel: 01902 733711 Fax: 01902 733722

1

4

3

30

25

931

17

36

7

8

10

12

14

28

2324

16 5

2

1811

37

19

622 21

35

32 33

20 26

2729

30

13

34

15

All rights reserved. No part of this publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical including photocopy, recording or any information storage and retrieval system, without permission in writing from SIG Trading Ltd. No information contained within this publication can be used to compile any other printed or electronic directory or mailing list. Whilst every effort has been made to ensure accuracy, the publisher does not, under any circumstances, accept responsibility for errors or omissions and no representation or warranty is made in relation to the suitability of a product for a specific application. Copying of the images contained in this publication, in any form without the author’s permission, is an unlawful act under the Copyright Designs and Patent Act 1988.

For full technical advice, thermal calculations and support, please contact your local SIG Insulation branch

Documents

Merchant product guide to Insulation Insulation... · So SIG Insulation have done all the hard work for you. ... Screws and Fixing Products Wood Glue42 Tapes 42 ... Expansion Joint