220
COMAND Operator's Manual

Mercedes-Benz M-Class 2009 – COMMAND Manual

  • Upload
    alex647

  • View
    30

  • Download
    1

Embed Size (px)

DESCRIPTION

Mercedes-Benz M-Class 2009 – COMMAND Manual

Citation preview

COMANDOperator's Manual

Welcome to COMAND!Please make yourself familiar with yourCOMAND control unit and read theinstructions in this manual before operatingthe COMAND system. This will help you derivea greater benefit from the system. Please alsofollow the instructions and warningscontained in this manual. Ignoring them couldresult in damage to the vehicle or personalinjury to you or others.Depending on model, version andconfiguration, your COMAND systemequipment may differ. Therefore, you mayfind explanations for optional equipment notinstalled in your vehicle. If you have anyquestions about the operation of anyequipment, your authorized Mercedes- BenzCenter will be glad to demonstrate the properprocedures.We continuously strive to improve ourproduct and ask for your understanding thatwe reserve the right to make changes indesign and equipment. Therefore,information, illustrations and descriptions inthis manual might differ from the equipmentinstalled in your vehicle. As such, theinformation, illustrations and descriptionscontained in this manual may not bereasonably relied upon in making any claimswith respect to the actual performance of theproduct.These operating instructions form an integralpart of the vehicle and should thereforealways be kept inside the vehicle and passedon to the new owner if the vehicle is sold.We extend our best wishes for many miles ofsafe, pleasurable driving.Mercedes-Benz USA, LLCA Daimler Company

Introduction.......................................... 15

At a Glance........................................... 19

System Settings................................... 37

Navigation............................................ 47

Telephone............................................. 95

Audio................................................... 117

Video................................................... 153

Rear Seat Entertainment................... 163

Voice Control...................................... 183

Tele Aid............................................... 213

Content 3

1, 2, 3 ...911 emergency call system...... 100, 214

AAccepting incoming calls............ 27, 107Active partitions in USB devices...... 150Address book

adding destinations to...................... 93creating new entries....................... 110deleting entries from.............. 103, 112dialing numbers from...................... 114downloading contents.................... 115editing entries................................. 113General information........................ 109Home address.................................. 90navigating to destinations in........... 114Opening.......................................... 109saving call list entries in................. 105searching........................................ 111voice control with............................... 114, 195, 206, 210see My address (destination)

Address of destination (See alsoDestinations)

entering with voice commands....... 191home address................................... 69stopover destinations....................... 71

Alphabetical track selection............. 150Alternative Route function.................. 85Announcement phase (drivingmaneuvers)........................................... 81Announcements, navigation

see Navigation announcements Announcements, traffic (real-time).... 90Answering incoming calls........... 27, 107Audio........................................... 118, 172

announcements................................ 84CD, DVD, and MP3......................... 130loudness........................................... 32media interface............................... 145phone volume................................... 99read-out............................................ 32rear seat entertainment system...... 169sound settings.................................. 32steering wheel operation.................. 25surround sound................................. 33

turning off......................................... 32voice control................................... 184wireless headsets........................... 167see Muting audio see Navigation announcements see Read-aloud announcements see Volume

Audio Aux (auxiliary)main system................................... 151voice commands for....................... 203

Audio DVDPause function................................ 138

Audio DVD discsNotes about.................................... 131

Audio formataudio playback................................ 141DVD video....................................... 160rear seat entertainment system...... 174

Audio menu................................... 25, 118Authorizing Bluetooth devices...... 44, 97Automatic (display)

main display...................................... 40rear seat entertainment system...... 170

Automatic picture switch-off............ 154Auxiliary (Aux)

operation main audio...................... 151Auxiliary (Aux) operation

main video...................................... 161rear seat entertainment system....................................... 166, 169, 180voice commands for....................... 203voice control with........................... 209

Avoid settings for route guidance...... 57

BBackward track skip.......................... 139Balance (sound), setting...................... 33Bass setting

main system..................................... 32rear seat entertainment system...... 169

Batteries for rear seatentertainment..................................... 167Bird's eye view..................................... 55Bit rates for digital audio................... 131Blocked areas for route guidance....... 57Blocking routes.................................... 85

4 Index

Bluetooth®............................................ 43activating phone............................... 97Device de-authorizing....................... 45Displaying details.............................. 44downloading address bookcontent........................................... 115External authorization................. 45, 98List of devices................................... 43making calls...................................... 96Switching On/Off............................. 43

Brightness settingDVD video....................................... 158main function display........................ 40rear seat entertainment system....................................... 171, 177, 181

Browsing listssee Predictive speller see Searching

CCalculating routes

see Route guidance Calling................................................. 107Calling (See also Telephone)

dialing with keypad......................... 107emergency calls..................... 100, 214history of calls................................ 104redialing.................................... 27, 108using address book entries............. 114using phone book entries......................................... 27, 101, 108voice control with................... 187, 197see Call lists

Call lists.............................................. 104calling number in............................ 108deleting........................................... 106saving entries in address book....... 105Selecting......................................... 104

Call waiting function.......................... 109Camera, rear view................................ 42Camera angle, DVD video.......... 160, 179Canceling entry into COMAND............ 30Categories

iPods, MP3 players, and USBdevices........................................... 148points of interest (POIs).................... 74

satellite radio.......................... 127, 200stopover destinations....................... 71

CD/DVD discsLoading........................................... 132Notes about.................................... 132

CD/DVD drive, rear seatentertainment..................................... 166

multiuser operation and.................. 169CD audio, main vehicle...................... 130

ejecting discs.................................. 134fast forward and reverse................. 139Gracenote® Media Database.......... 140handling and care of discs.............. 132loading discs................................... 132starting playback............................ 136stopping or pausing playback......... 138voice control with................... 202, 208

CD audio, rear seat entertainment..................................................... 166, 169CD mode

Selecting a track............................. 139Channel selection (satellite radio)...... 25

voice commands for....................... 201Chapter selection (DVD)

main video...................................... 158rear seat entertainment system...... 177

Character entry.................................... 29City center, selecting asdestination.................................... 66, 192City of destination, selecting.............. 62Color video settings

main video...................................... 158rear seat entertainment system............................................... 177, 181

COMANDPhone book.................................... 101

COMAND, about.................................... 20basic functions................................. 31operation of...................................... 28resetting to factory settings.............. 45switching on/off............................... 31

Commands for voice control............. 203for address book.................... 196, 206for CD, DVD, MP3................... 202, 208for navigation......................... 190, 205for phone operation................ 187, 204

Index 5

for radio and satellite radio..... 199, 207general commands......................... 203

Compass display.................................. 61Contacts

see Address book Contrast setting

main video...................................... 158rear seat entertainment system............................................... 177, 181

Control System..................................... 20Copying music files into MusicRegister............................................... 142Copyright, audio................................. 131Crosshair position in map................... 54

saving in Last Destinations............... 94Current location of vehicle

see Vehicle location (current) Current street, displaying................... 59Customer Assistance Center,calling.................................................. 215

DData for navigation

see Updating map software Date/time format................................. 39Daylight Savings Time......................... 39Day mode (display)

main display...................................... 40rear seat entertainment system...... 170

Deregistering Bluetooth devices........ 45Destination

input from map................................. 70Destination input.................................. 61

Entering a city................................... 62Entering a house number.................. 66from destination memory................. 69from Last Destinations...................... 70Selecting a state/province............... 62speed restriction on.................... 52, 70Stopover........................................... 71Via address....................................... 61

Destination memory (See also LastDestinations).................................. 69, 90

adding stopover destination............. 71choosing destination from................ 69home address in............................... 90

saving destinations to............... 92, 194voice control for............................. 194

Destination reached message............. 83Destinations

adding to address book.................... 93displaying information about............ 86distance to, displaying...................... 59guidance to....................................... 80moving map to.................................. 55saving to destination memory................................................. 92, 194Search & Send service.................... 215selecting point of interest................. 73stopover destinations....................... 71voice control with........................... 191see Route guidance

Detour function.................................... 85Dialed calls, list of.............................. 104Dialing telephone

see Calling Dialog

see Voice control Disc handling........................ 48, 132, 154Disk drive for rear seatentertainment system....................... 166

multiuser operation and.................. 169Display, main........................................ 22

automatic DVD picture switch-off... 154brightness setting............................. 40menus......................................... 25, 28rear view camera.............................. 42settings for....................................... 40switching on/off............................... 39with voice command....................... 186

Display, mapsee Map display

Display screens, rear seatentertainment..................................... 165

hiding or showing menus................ 176multiuser operation........................ 169selecting for headset...................... 167selecting for remote....................... 166

Distance to destination, displaying.... 59District, selecting as destination........ 66

with voice commands..................... 192Downloading address book content. 115Driving-direction map orientation...... 55

6 Index

Driving maneuvers............................... 80DRM (Digital Rights Management). . . 145DTMF tone transmission................... 108DVD audio, main vehicle.................... 130

ejecting discs.................................. 134fast forward and reverse................. 139handling and care of discs........ 48, 132loading discs................................... 132setting audio format....................... 141starting playback............................ 136stopping or pausing playback......... 138voice control with................... 202, 209

DVD audio, rear seatentertainment............................ 166, 169DVD changer

Loading............................................. 49DVD menu operation................. 158, 178DVD mode

Selecting a track............................. 139DVD video........................................... 154

control menu, displaying/hiding..... 156handling and care of discs.............. 154operating DVD menu.............. 158, 178rear seat entertainment system...... 175voice control with................... 203, 209

DVD VideoAutomatic picture switch-off........... 154DVD menu...................................... 158Fast forward/rewind....................... 157Functional restrictions.................... 155interactive content......................... 160Menu system.................................. 157Notes on media.............................. 154picture settings............................... 158Safety notes................................... 154Selecting film/track....................... 158Selecting media.............................. 157Stop function.................................. 157Submenu overview......................... 156Switching to.................................... 156

EEjecting discs, rear seatentertainment system....................... 172Ejecting discs and memory cards

main audio system.......................... 134Emergency phone calls............. 100, 214

Ending active phone calls.................. 109Ending calls........................................... 27External audio or video devices

main system........................... 145, 151rear seat entertainment system...... 180voice control with........................... 203

FFader (sound), setting.......................... 33Fast forward

audio playback....................... 139, 148rear seat entertainment system............................................... 173, 176video playback................................ 157

Film selection, DVD.................... 158, 177Folders

iPods, MP3 players, and USBdevices........................................... 148MP3 mode, selecting...................... 140Music Register........................ 143, 144rear seat MP3 operation................. 173

Formats, audio................................... 131Forward track skip............................. 139Full-screen map.................................... 54

GGeo-coordinates, displaying................ 59Global voice control commands....... 185Google Maps®..................................... 215GPS reception....................................... 51

displaying geo-coordinates............... 59Gracenote®

Media database.............................. 140GSM network coverage........................ 96

HHands-free microphone, switchingon/off.................................................. 108Hanging up (phone calls)................... 109Hard disk drive..................................... 51

voice control with........................... 209HD Radio™.......................................... 122Headsets, rear seat entertainment..................................................... 167, 168Help with voice control, general....... 212Highway information, displaying........ 60

Index 7

Highway junctions, selecting asdestination............................................ 67Home address in destinationmemory........................................... 69, 90

deleting............................................. 93setting or changing........................... 90

House numbers, entering fordestination.................................... 66, 193

IIncident (traffic notification)............... 87Incoming calls

answering................................. 27, 107rejecting................................... 27, 107

Individualization of voice control....... 41Information calls................................ 215Initiating phone calls

see Calling Input of navigation destination........... 61

speed restriction on.................... 52, 70Inserting disk, rear seatentertainment..................................... 171Installing map data.............................. 49Interactive content on DVDs..... 160, 179Interrupting audio playback.............. 138Interrupting video playback.............. 157IPod devices....................................... 145

connecting to.................................. 145playback options............................ 148playlists and folders........................ 148selecting tracks.............................. 147

KKeypad, entering characters with...... 29

LLane recommendations....................... 82Language settings................................ 40

DVD video.............................. 160, 179for predictive speller....................... 106rear seat entertainment system...... 170

Last Destinations ................................ 94adding stopover destination............. 71adding to memory............................. 92choosing destination from................ 70deleting destination from.................. 94

saving current vehicle position................................................... 54, 94voice control for............................. 194

Lever for voice control....................... 185Listing address book contents......... 197Loading CDs and DVDs

main system................................... 132rear seat entertainment system...... 171

Loading SD memory cards................ 134Local voice control commands......... 185Location of vehicle, current

see Vehicle location (current) LOGIC7® Surround Sound system...... 33Loudness

see Volume

MMagazine compartments, DVDchanger............................................... 132Main function display

see Display, main Main function menus

list of................................................. 22navigation mode, switching to.......... 53opening............................................. 28

Main menu, overview of...................... 23Maneuver phase (drivingmaneuvers)........................................... 81Map display

blocked areas for route guidance..... 57general information, at bottomedge.................................................. 59hiding crosshairs............................... 55selecting points of interest (POIs)..... 56

Map Display.......................................... 55Map display (See also Navigation)...... 55

destination information..................... 86driving maneuver preparation........... 80entering destination on..................... 70entering POI from............................. 78setting scale..................................... 54traffic lane recommendations........... 82traffic notifications in........................ 87updating map software..................... 48

Measurement units, navigation.......... 52Media interface.................................. 145

Connecting devices........................ 146

8 Index

Data formats................................... 145Selecting category/playlist/folder. 148Selecting files................................. 147Switching to.................................... 146

Memory cardsejecting........................................... 135loading............................................ 134starting playback............................ 136voice control with................... 203, 209

Memory information, MusicRegistry............................................... 144Menus, COMAND

how to operate................................. 28language settings.............................. 40list of................................................. 23

Menus, steering wheel......................... 25Messages

during voice command................... 186for driving maneuvers....................... 80for traffic line recommendations....... 82language for...................................... 40real-time traffic reports..................... 89see Language settings

Missed calls, list of............................ 104Missed navigationannouncements, requesting............... 84Mobile telephone

see Telephone MP3 mode

Selecting a track............................. 139MP3 mode, main vehicle................... 130

fast forward and reverse................. 139Music Register................................ 142selecting folders............................. 140starting playback............................ 136stopping or pausing playback......... 138voice control with................... 202, 208

MP3 operation, rear seatentertainment..................................... 172

general operation........................... 172MP3 players........................................ 145

playback options............................ 148playlists and folders........................ 148selecting active partition................ 150selecting tracks.............................. 147

MP3 storage medium......................... 130Multifunction steering wheel.............. 24

voice control button........................ 185

Multisession CDs................................ 130Music register

Deleting.......................................... 144Folder functions.............................. 144Switching on................................... 142

Music Register.................................... 142Muting audio

main system..................................... 32navigation announcements......... 32, 84rear seat entertainment system...... 166

My address (destination)............... 69, 90deleting from destination memory.... 93setting or changing........................... 90

NNames

for MP3 files and folders................. 130for saved destinations...................... 92Music Register folders.................... 144searching for POIs by........................ 73

NavigationBasic settings................................... 55Displaying/hiding menu system....... 54Entering a destination....................... 61General information.......................... 50Last destinations.............................. 94Map display...................................... 55Menu Overview................................. 52POI input........................................... 73Route guidance................................. 80Scrolling the map.............................. 54Setting map scale............................. 54

Navigation (See also Routeguidance).............................................. 48

destination input............................... 61destination memory.......................... 90language setting............................... 40operational readiness....................... 50POI input........................................... 73steering wheel operation.................. 26switching to navigation mode........... 53to address book destinations......... 114traffic messages............................... 87updating map software..................... 48voice control with................... 189, 205

Index 9

Navigation announcements................................................. 81, 84, 184

during active phone calls.................. 84switching on/off......................... 32, 84volume of.......................................... 32

NAVI menu...................................... 26, 52Near destination, entering POI........... 73Network coverage for phone calls...... 96Night mode (display)

main display...................................... 40Normal track sequence..... 141, 145, 150

rear seat entertainment system...... 175Northward map orientation................ 55Number keypad

entering characters with................... 29Numbers, entering with voicecommand............................................ 186Numbers for audio tracks................. 148

OOff-map routes..................................... 83Off-road routes............................... 58, 83Operating safety................................... 17Orientation of map............................... 55Outgoing calls

see Calling

PPartitions in USB devices.................. 150Passcodes for Bluetooth phones........ 98Pausing playback

main audio...................................... 138main video...................................... 158rear seat entertainment system............................................... 174, 176

Personal POI symbols.......................... 56Phone

Call lists.......................................... 104Submenu........................................ 100Switching to phone mode............... 100see Telephone

Phone book......................................... 101adding entries................................. 102Adding phone number to an entry. . 103Call to an entry............................... 102Creating new entry......................... 102

deleting from.................................. 103dialing from...................... 27, 102, 108editing entries................................. 103Selecting entry............................... 101voice control with........................... 189

Phone callsemergency.............................. 100, 214lists of............................................. 104making............................................ 107see Calling

Phone menu........................................ 100Phone number search for POIs........... 73Picture format

main video...................................... 158rear seat entertainment system............................................... 178, 181

Picture settings for videomain system................................... 158rear seat entertainment system............................................... 177, 181

Playback optionsiPods, MP3 players, and USBdevices........................................... 150Music Register................................ 145rear seat entertainment system...... 175track sequence............................... 141

Playing audiofast forward and reverse......... 139, 148for rear seat entertainment............. 169for rear seat entertainmentsystem............................................ 171headsets......................................... 167iPods and MP3 players................... 145Music Register................................ 142muting.............................................. 32options for playback....................... 141selecting track................................ 139see Muting audio see Selecting audio track

POI inputChoosing a category......................... 74Local area of destination.................. 73Vicinity of location............................ 73Vicinity of specific location............... 73

Points of interest (POIs)adding stopover destination............. 71selecting as destination.................... 73selecting which are displayed........... 56

10 Index

stopover destinations....................... 71voice control for............................. 193ZAGAT® Rating Service..................... 77

Possible lane, defined.......................... 82Predictive speller................................. 29

city list.............................................. 62destination memory list.................... 69for points of interest (POIs)........ 74, 77house number list............................. 66settings for address book entry....................................................... 106street junction list............................. 67street list.......................................... 65zip code list....................................... 64

Preparation phase (drivingmaneuvers)........................................... 80Province of destination, selecting....................................................... 62, 191

RRadio

HD Radio™..................................... 122selecting stations........................... 200voice control with........... 199, 207, 212

Radio (See also Satellite radio)......... 119Random track playback. . . . 141, 145, 150

rear seat entertainment system...... 175Read-aloud announcements

navigation......................................... 84settings for....................................... 41see Navigation announcements

Read CD Database function.............. 140Real-time traffic notifications............. 87Rear audio option............................... 118Rear seat entertainment system...... 164

audio operation............................... 171Aux operation................................. 180basic functions............................... 169system settings.............................. 170video operation............................... 175

Rear view camera, switching on/off.......................................................... 42Received calls, list of......................... 104Receive volume (phone)...................... 99Recommended lane, defined............... 82Redialing telephone..................... 27, 108

voice control for............................. 189

Registering mobile phones.................. 97Rejecting incoming calls............. 27, 107Remote control, rear seatentertainment..................................... 165

batteries for.................................... 168Removing discs and memory cards. 134Rewind (reverse)

main audio playback............... 139, 148rear seat entertainment system...... 173video playback........................ 157, 176

Roadside assistance.......................... 214Route browser...................................... 86Route calculation................................. 68

Alternative Route function................ 85Detour function (blocking routes)..... 85history of, saving............................... 94points of interest (POIs).............. 77, 78with home address........................... 91see Last Destinations

Route guidance.............................. 57, 80after vehicle transport...................... 51blocked areas................................... 57canceling or resuming...................... 85Detour function................................. 85detours and alternative routes.......... 85Driving maneuver.............................. 80driving maneuvers............................ 80navigation announcements..................................... 32, 81, 84, 184off-map routes.................................. 83off-road routes............................ 58, 83Route browser.................................. 86saving calculations for...................... 94stopover destinations....................... 71traffic lane recommendations........... 82traffic messages............................... 87voice control for............................. 194with home address........................... 91see Last Destinations

SSatellite radio..................................... 125

category selection.................. 127, 200selecting channels.................... 26, 201voice control with........... 199, 208, 212

Saving music files in MusicRegister............................................... 142

Index 11

Saving route calculationssee Last Destinations

Scale of navigation map, setting........ 54Scene selection

main system................................... 158rear seat entertainment system...... 177

Scrolling navigation map..................... 54SD memory card

ejecting........................................... 135SD memory cards

ejecting........................................... 135loading............................................ 134starting playback............................ 136

Search & Send.................................... 215Search & Send service....................... 215Searching (See also Predictive speller)

address book.................................. 198audio tracks.................................... 139for Bluetooth devices........................ 43for mobile phones............................. 97phone book....................................... 27points of interest (POIs).................... 74see Track selection (audio)

Selecting audio trackCD, DVD, or MP3............................ 139copying into Music Register............ 143iPods and MP3 players........... 147, 150normal and random options............ 141rear seat entertainment system...... 173steering wheel operation.................. 26voice commands for....................... 203

Selecting from lists.............................. 30Settings for COMAND system............. 38

resetting to factory settings.............. 45Skipping to tracks

see Track selection (audio) Sound

see Audio Speed restriction on destinationinput................................................ 52, 70Speed restriction on video display... 154Speller................................................... 29

city list.............................................. 62destination memory list.................... 69for points of interest (POIs)........ 74, 77house number list............................. 66street junction list............................. 67

street list.......................................... 65zip code list....................................... 64

Spelling with voice command........... 186Standard POI symbols......................... 56Standard Time...................................... 39State of destination, selecting.... 62, 191Station selection (radio)

voice commands for....................... 200Steering wheel............................. 24, 185Stopover destinations.......................... 71

deleting............................................. 73Stopping playback

main audio...................................... 138main video...................................... 157rear seat entertainment system............................................... 174, 176

Storage media handling...... 48, 132, 154Street junctions, selecting asdestination............................................ 67Street of destination, selecting....................................................... 65, 192Subtitles for DVD video............. 160, 179Surround sound.................................... 33Symbols in this book........................... 17System language.................................. 40

for predictive speller....................... 106System Settings menu......................... 38

reset to factory settings.................... 45

TTele Aid............................................... 214Telephone

Activating mobile phone................... 97Bluetooth interface........................... 97Functional restrictions...................... 97General information.......................... 96Operating options............................. 96Prerequisites..................................... 97Setting transmit and receivevolume.............................................. 99

Telephone (See also Calling)activating.......................................... 97address book.................................. 109call lists.......................................... 104call waiting function........................ 109incoming calls........................... 27, 107loudness of calls............................... 32

12 Index

making calls.................................... 107navigation announcements duringcalls.................................................. 84phone book..................................... 101safety and general information......... 96steering wheel operation.................. 26Tele Aid........................................... 214voice control with................... 187, 204

Telephone booksee Phone book

Telephone callsemergency.............................. 100, 214lists of............................................. 104making............................................ 107see Calling

Tel menu................................................ 26Terminating phone calls.................... 109Time of arrival, displaying................... 59Time settings........................................ 39Time zone, setting................................ 39Town, selecting as destination......... 191Track names....................................... 130Track selection (audio)

CD, DVD, or MP3............................ 139copying into Music Register............ 143iPods and MP3 players........... 147, 150normal and random options............ 141rear seat entertainment system...... 173steering wheel operation.................. 26voice commands for....................... 203

Track selection (video)...... 158, 159, 177voice commands for....................... 203

Traffic lane recommendations............ 82Traffic messages.................................. 87Training for voice control.................... 41Transmit volume (phone).................... 99Treble setting

main system..................................... 32rear seat entertainment system...... 169

Troubleshootingvoice control................................... 210

UUCI connection................................... 145Units of measurement, navigation..... 52Updating Gracenote® MediaDatabase............................................. 141

Updating map software....................... 48USB devices

connecting to.................................. 146playback options............................ 150playlists and folders........................ 148selecting active partition................ 150selecting tracks...................... 147, 150

VVehicle location (current)

compass display............................... 61displaying.......................................... 59GPS reception................................... 51moving map to.................................. 55saving in Last Destinations......... 54, 94

Video................................................... 154control menu, displaying/hiding..... 156handling and care of discs.............. 154interactive content......................... 160operating DVD menu.............. 158, 178picture settings............................... 158rear seat entertainment system...... 175voice control with........................... 209

Video Aux (auxiliary)main system................................... 161rear seat entertainment system...... 166

Voice control...................................... 184creating voice tags......................... 196general operation........................... 184language settings.............................. 40training for voice recognition............ 41with address book.......... 114, 195, 210with DVD changer........................... 202with external equipment (Aux)........ 203with navigation............................... 189with phone...................................... 187with radio and satellite radio. . 199, 212

Voice ControlCanceling the dialog....................... 186command list.................................. 203Help function.................................. 212Interrupting the dialog.................... 186Operating safety............................. 184settings............................................. 41Starting the dialog.......................... 186Switching help screen on or/off....... 41troubleshooting.............................. 210

Index 13

Voice mail, voice control for............. 189Voice tags, creating........................... 196Volume (loudness)

COMAND.......................................... 32external audio sources........... 151, 161mobile phones.................................. 99muting COMAND.............................. 32navigation announcements......... 32, 84phone calls....................................... 32voice command.............................. 186wireless headsets........................... 167

WWireless headsets, rear seatentertainment..................................... 167

basic operation............................... 169batteries for.................................... 168muting audio playback.................... 167

WMA files in Music Register............. 142

YYahoo Local Maps®............................ 215

ZZAGAT® Rating Service........................ 77Zip code of destination, selecting....... 64

14 Index

Where to find it ................................... 16Symbols ............................................... 17Operating Safety ................................. 17

15

Intr

oduc

tion

Where to find it

This operating guide has been designed tohelp you use your COMAND control unit in allsituations. Each chapter has its own colorcode in order to make it easier to findinformation. Since not all models have thesame standard equipment, your COMANDsystem equipment may deviate from somedescriptions and illustrations.

At a GlanceHere you will find an overview of thecomponents of COMAND. Then you will findexamples illustrating how to operateCOMAND and information on the basicfunctions. If you are operating a COMAND forthe first time or have rented the vehicle, youshould first read this chapter.

System SettingsHere you will find all the importantinformation regarding the system settings ofthe COMAND.

NavigationHere you will find detailed informationregarding the following topics:RSetting options for the map display and the

route calculationRDestination inputRPOI inputRRoute guidanceRDestination memory

TelephoneThe telephone functions are described here.You will also find information on the addressbook.

AudioHere you will find all information regardingthe audio function and its Radio, HD Radio,SatRadio, CD-audio/DVD audio/MP3, MusicRegister, Media Interface and Audio Auxmodes.

VideoHere you will find all information regardingthe video system.

Rear Seat Entertainment (RSE)In this chapter the Rear Seat Entertainmentis explained.

Voice ControlHere you will find information about operatingseveral COMAND functions via Voice Control.

Tele AidHere you will find information on how to useTele Aid and the Search & Send function.

IndexesContent and keyword indexes are intended tohelp you find information quickly.

16 Where to find itIn

trod

uctio

n

Symbols

You will find the following symbols in theseoperating instructions:

G Warning!Warning notices draw your attention tohazards that may endanger your health or life,or the health or life of others.

! Highlights hazards that may result indamage to your COMAND.

i Helpful hints or further information youmay find useful.

X This symbol points toinstructions for you to follow. Anumber of these symbolsappearing in successionindicates a multiple-stepprocedure.

O The continuation symbol marksan interrupted procedure whichwill be continued on the nextpage.

(Ypage 11) This symbol tells you where tolook for further information onthis subject.

Display Messages, menu items or softkey names appearing in theCOMAND color display areprinted in the style shown here.

Operating Safety

G WarningAny alterations of electronic components orsoftware can cause malfunctions.Radio, satellite radio, amplifier, DVD changer,navigation module, telephone and VoiceControl systems are interconnected.Therefore, if one of the components is notoperational, or has not been removed/

replaced properly, the function of othercomponents could be impaired.Such conditions might seriously impair theoperating safety of your vehicle.We recommend to have any service work onelectronic components carried out by anauthorized Mercedes-Benz Center.

G WarningIn order to avoid distraction which could leadto an accident, the driver should enter systemsettings while the vehicle is at a standstill, andoperate the system only when permitted byroad, weather and traffic conditions.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your car covers adistance of 44 feet (approximately 14 m) everysecond.COMAND supplies you with information tohelp you select your route more easily andguide you conveniently and safely to yourdestination. For safety reasons, weencourage the driver to stop the vehicle in asafe place before answering or placing a call,or consulting the COMAND screen to readnavigational maps, instructions, ordownloaded information.

G WarningWhile the navigation system providesdirectional assistance, the driver must remainfocused on safe driving behavior, especiallyattention to traffic and street signs, andshould utilize the system’s audio cues whiledriving.The navigation system does not supply anyinformation on stop signs, yield signs, trafficregulations or traffic safety rules. Theirobservance always remains in the driver’spersonal responsibility. DVD maps do notcover all areas nor all routes within an area.

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

Operating Safety 17

Intr

oduc

tion

Z

1. This device may not cause harmfulinterference, and

2. This device must accept any interferencereceived, including interference that maycause undesired operation.

G WarningChange or modification not expresslyapproved by the party responsible forcompliance could void the user's authority tooperate this equipment.

! Note: This equipment has been testedand found to comply with the limits for aClass A digital device, pursuant to Part 15of the FCC Rules. These limits are designedto provide reasonable protection againstharmful interference when the equipmentis operated in a commercial environment.This equipment generates, uses and canradiate radio frequency energy and, if notinstalled and used in accordance with theinstruction manual, may cause harmfulinterference to radio communications.

G WarningThis equipment complies with FCC radiationexposure limits set forth for uncontrolledequipment and meets the FCC radiofrequency (RF) Exposure Guidelines inSupplement C to OET65.This equipment has very low levels of RFenergy that is deemed to comply withoutmaximum permissive exposure evaluation(MPE). But it is desirable that it should beinstalled and operated with at least 8 inches(20 cm) and more between the radiator andperson's body (excluding extremities: hands,wrists feet and legs.)

Declaration of Conformity Regardingthe Distribution ofTelecommunications Equipment

Daimler AG declares herewith that this deviceconforms to the basic requirements and theother relevant regulations of Directive1999/5/EC (RTTE Directive).

Intended PurposePlease bear the following information in mindwhen using the COMAND:RThe safety instructions in this guideRRoad Traffic Regulations

i Tampering with electronic components orsystems (e.g. radio, DVD changer) and theirsoftware may result in malfunctioning.Systems which have not been changed maybe affected due to the connectivity of theelectronics. Malfunctions of the electronicscan seriously endanger the operationalsafety of your vehicle.

i Always have all work or modifications toelectronic components carried out by aqualified specialist workshop with thenecessary expertise and tools for any workrequired. Daimler AG recommends aMercedes-Benz service center for thispurpose. Especially for safety-relatedoperations and operations on safety-related systems, servicing by a qualifiedspecialist workshop is essential.

Function Restrictions When Drivingthe Vehicle

For safety reasons, some COMAND functionsare restricted or not available when thevehicle is moving. This can be recognized, forexample, from the fact that certain menuitems cannot be selected or the COMANDdisplays a corresponding message.

18 Operating SafetyIn

trod

uctio

n

COMAND Control System ................... 20Multifunction Steering Wheel ............ 24Operating COMAND ............................ 28Basic Functions of COMAND .............. 31

19

At a

Gla

nce

COMAND Control System

Function Page

1 $

Switch to radio mode 119Switch wavebands 120

2 W

Switch to system menu 38

3 h

Switch to CD audio/DVDaudio and MP3 operation 136Switch to video DVD mode

4 %

Switch to phone main menuor address book 100

5 V

Load/Eject button 132,134

6 Disc slotLoading CDs/DVDs 132Ejecting CDs/DVDs 134Update the map software 49

Function Page

C SD memory card slotLoading SD memory card 134Ejecting SD memory card 135

D COMAND display

E Number keypadSelect stations via thestation preset 121Store stations manually 121Enter the Bluetoothpasskey 97Enter the phone number 107Send DTMF tones 108U

Set map scale (enlarge) 54T

Set map scale (reduce) 54

20 COMAND Control SystemAt

a G

lanc

e

Function Page

F 2

Press briefly:Delete individualcharactersPress and hold:Erase an entire entry

G k

Press briefly:Leave the menu and switchto the next menu level upPress and hold:Switch to the basic displayof the current operatingmode

H 9

Press briefly:Confirm a selectionStore the setting 32Hide or show the menusystem 54Press and hold:Accepts a list entry

I 9/:/;/=Select a station 120Select a track 139Select menu items or listentriesExit menus or listsScroll the map 54

Function Page

J Set the volume 32

K Switch COMAND on or off 31

L F/ESelect stations 120Select the next/previoustrack 139Fast rewind/forward 139

M 6

Accept a call 107Redial 108

N ~

Reject a call 107End an active call 109

O x

Switch the sound on and off 32Switch off navigationannouncements 32

P Ø

Switch to navigation mode 53

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Function OverviewWith COMAND you can operate the followingmain functions:Rthe navigation systemRthe audio function with the radio, HD

Radio™, SatRadio, disc (CD audio, DVDaudio or MP3 mode), SD memory card(MP3 mode), Music Register and Audio Auxmodes

COMAND Control System 21

At a

Gla

nce

Z

Rthe telephone and the address bookfunctionRDVD videoRsystems settingsYou can call up the main functions:Rusing the hard keys Ø, $, %,h or W.Rusing the main function line in the

COMAND display

COMAND Display The COMAND display shows the functioncurrently selected and its associated menus.The COMAND display is divided into severalareas.The radio display is shown in the example.

Example: Audio main function display1 Status line2 Main function line3 Main area4 Submenu lineStatus line 1 displays the time and thecurrent telephone status.With the main function line 2 you can selectthe main function. The selection is madeusing the ; and = buttons .In the example, the audio main function is setto radio mode and the main area 3 is active.

i The arrangement of the menus can vary,depending on the equipment. Normally, the

menus for the full equipment version areshown in this guide.

Menu OverviewHaving selected a main function, you will findthe submenu line at the bottom edge of theCOMAND display.If one of the main functions such asNavigation, Audio, Video or Phone is currentlyselected, additional menus are available fromthe main function line (Y page 23).This is indicated by a small triangle behind themain function label.

1 Triangle indicating an additional menu

22 COMAND Control SystemAt

a G

lanc

e

Main Function Menu Items

Navi Audio Phone Video

Map Display FM/AM Radio Telephone DVD Video

Mode SatRadio Address book Video Aux

Block Area Disc (CD audio , DVDaudio, MP3 mode,Media Interface)

Save Off-road Route Memory card (MP3mode)

Information On Map Music Register

Ç Highwayinformation

Media Interface

Aux

COMAND Control System 23

At a

Gla

nce

Z

Multifunction Steering Wheel

G Warning!A driver’s attention to the road and trafficconditions must always be his/her primaryfocus when driving.For your safety and the safety of others,selecting features through the multifunctionsteering wheel should only be done by thedriver when traffic and road conditions permitit to be done safely.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.

Function

1 Multifunction display

2 Selecting the submenu or settingthe volume:Press buttonW up/to increaseX down/to decrease

3 Telephone:Press button6 to take a call, to dial, to

redial~ to end a call, to reject an

incoming call

Function

4 Menu systems:Press buttonV for next menuU for previous menu

5 Press button briefly&

*

Within Audio/DVD menu to selectprevious or next track, scene orstored station.Within Telephone menu to switchto the phone book and select aname or number.Press and hold Button&

*

Selecting a menuWithin Audio/DVD menu to selectprevious or next track with quicksearch or to select previous or nextstation in station list or wave band.Within Telephone menu to startthe quick search in the phonebook.

Depending on the selected menu, pressingthe buttons on the multifunction steeringwheel will alter what appears in themultifunction display.The information available in the multifunctiondisplay is arranged in menus, each containinga number of functions or submenus.The individual functions are found within therelevant menu (Radio or CD operations underAUDIO, for example). These functions serveto call up relevant information.It is helpful to think of the menus, and thefunctions within each menu, as beingarranged in a circular pattern.

24 Multifunction Steering WheelAt

a G

lanc

e

If you press button V or U repeatedly,you will pass through each menu one after theother.If you press button * or & repeatedly,you will pass through each function display,one after the other, in the current menu.

The number of menus available in the systemdepends on which optional equipment isinstalled in your vehicle.The menus are described on the followingpages.

Multifunction Display Menus

Menus Functions and Submenus

Audio(Y page 25)

RSelecting radio stationsRSelecting satellite radio stationsROperating the DVD changer/Music register/Memory card/Media

interface

Navi(Y page 26)

DisplayRRoute guidance instructionsRCurrent street name and direction of travel

Tel(Y page 26)

RAnswering a callREnding and rejecting a callRSelecting a phone book entryRRedialing

i The headings used in the menus table are designed to facilitate navigation within thesystem and are not necessarily identical to those shown in the control system displays.The first function displayed in each menu will automatically show you which part of thesystem you are in.

AUDIO MenuThe functions in the AUDIO menu operate theaudio equipment which you currently haveturned on.If no audio equipment is currently turned on,the message AUDIO OFF appears in themultifunction display.The following functions are available:

Selecting Radio StationsX From COMAND select FM/AM Radio in the

Audio menu.X Press button V or U repeatedly until

you see the currently tuned station in themultifunction display.

X Select next or previous stored station:Press button * or & briefly to selecta stored station.

X Select next or previous station in thestation list: Press and hold * or &to select a station.

Multifunction Steering Wheel 25

At a

Gla

nce

Z

i You can only store new stations using theCOMAND controls.

Selecting Satellite Radio StationsThe satellite radio is treated as a radioapplication.X From COMAND select SatRadio in the

Audio menu.X Press button V or U repeatedly until

you see the currently tuned station in themultifunction display.

X Select next or previous stored channel:Press button * or & briefly to selecta stored channel.

X Select next or previous channel in thechannel list: Press and hold * or& to select a channel.

Operating DVD Changer, Music Register,Memory Card, Media InterfaceSelecting a track or sceneX From COMAND select a source from the

Audio menu.X Press button V or U repeatedly until

the audio source currently being playedappears in the multifunction display.

X Selecting previous or next track: Pressbutton * or & briefly.

X Selecting a track from the track list(quick search): Press and hold * or&.

i Track selection may depend on selectedsettings in COMAND or the connecteddevice.

NAVI MenuThe NAV menu contains the functions neededto operate your navigation system.X Press button V or U repeatedly until

you see the message NAV in themultifunction display.

The message shown in the multifunctiondisplay depends on the status of thenavigation system:

Rwith COMAND switched off, the messageNAV OFF appears in the multifunctiondisplay.Rwith COMAND switched on but route

guidance not activated, the direction oftravel and, if applicable, the name of thestreet currently traveled on appear in themultifunction display.Rwith COMAND switched on and route

guidance activated, the direction of traveland maneuver instructions appear in themultifunction display.

Tel Menu

G WarningA driver's attention to the road must alwaysbe his/her primary focus when driving. Foryour safety and the safety of others, werecommend that you pull over to a safelocation and stop before placing or taking atelephone call. If you choose to use the mobilephone while driving, please use the handsfreedevice and only use the mobile phone whenweather, road, and traffic conditions permit.Some jurisdictions prohibit the driver fromusing a cellular mobile phone while driving avehicle.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.

You can use the functions in the Tel menu tooperate your mobile phone, provided it isconnected to a hands-free system andswitched on.X Switch on the mobile phone and COMAND .X Press button V or U on the steering

wheel repeatedly until the TEL menuappears in the multifunction display.

Which message appears in the multifunctiondisplay depends on your mobile phone'sauthorization and on/off status:

26 Multifunction Steering WheelAt

a G

lanc

e

RIf the mobile phone has not yet beenauthorized, the message in themultifunction display is: BLUETOOTHREADY.RIf the mobile phone is switched on and

authorized, the message in themultifunction display is: READY.

Answering a CallWhen your mobile phone is ready to receivecalls, you can answer a call at any time. In themultifunction display you will see acorresponding message or, if available, thecaller ID (name and number):X Press button 6.

You have answered the call.

Ending a Call or Rejecting an Incoming CallX Press button ~.

Dialing a Number from the Phone BookIf your mobile phone is ready to receive calls,you may select and dial a number from thephone book at any time.X Press button V or U repeatedly until

the TEL menu appears in the multifunctiondisplay

X Press button * or & repeatedly untilthe desired name or number appears in themultifunction display.

X To scroll through the list of names ornumbers using the quick search mode:Press and hold button * or & forlonger than one second.The system scrolls rapidly through the listof names or numbers until you release thebutton.The stored names are displayed inascending or descending alphabeticalorder.

X To cancel the quick search mode: Pressbutton ~

i If no contacts have been downloadedfrom the mobile phone, No entries

appears in the multifunction display when* or & is pressed.

X Press button 6.The system dials the selected phonenumber.If the connection is successful and thisfeature is supported by your networkprovider, the name of the party you arecalling (if stored in your phone book) willappear in the multifunction display.If no connection is made, the controlsystem stores the dialed number in theCalls dialed memory.

RedialingThe control system stores the most recentlydialed phone numbers. This eliminates theneed to search through your entire phonebook.X Press button V or U repeatedly until

the TEL menu appears in the multifunctiondisplay.You will see the Ready message.

X Press button 6.In the multifunction display you see the firstnumber in the Calls dialed memory.

X Press button * or & repeatedly untilthe desired name appears in themultifunction display.

X Press button 6.The control system dials the selectedphone number.

Multifunction Steering Wheel 27

At a

Gla

nce

Z

Operating COMAND

Opening Menu of a Main Function

Example: Audio Menu

Within the Audio Function

1 Main function line2 Audio menu3 The symbol R indicates current

operating mode.

X To switch to main function line 1:Press 9.

X To select audio main function:Press ; or =.

X To confirm selection: Press 9.You will see the main display for theselected audio mode.

X To switch back to the main functionline 1:Press 9 and 9.The Audio menu appears.

Selecting Menu Item

Example 1: Radio, Station Memory

1 Selection bar

Selecting Menu ItemX Press 9 or :.

The selection bar moves up and downwithin the list.

Confirming Menu ItemX Press 9.

Exiting the Menu Without SelectingX Press ; or = against the list

direction.

Example 2: Navigation, EnterDestination Menu

Enter Destination menu1 Menu with upper and lower menu bar2 Selector bar

28 Operating COMANDAt

a G

lanc

e

Selecting Menu ItemX Press ; or =.

The selector bar moves horizontally.

Switching Menu BarX Press 9 or :.

Confirming Menu ItemX Press 9.

Character Entry The example shows a list of cities duringdestination entry in the navigation.

1 Predictive speller with number andcharacter line

i In the predictive speller 1 you can onlyselect the characters that are currentlyavailable. The set of characters that isavailable depends on those already enteredand the data for the digital map.

When entering characters, the list entry at thetop always displays an entry that bestmatches the characters already entered.COMAND automatically adds matchingletters to those already entered by the user.

Entering Characters

Using the SpellerX To select characters: Press ; or=.

X Press 9 or : to switch between thelines in the speller.

X To confirm character selection: Press9.

A possible option:X To switch predictive speller language

(character set): Select !.

With Number KeypadAlternatively, you can enter characters usingthe number keypad (direct input).Example:X Press one of the number keys, e.g. l,

once or repeatedly in succession.After you have pressed it the first time, thecharacter display appears at the loweredge of the display. The first available letteris highlighted.

You see which characters you can enter withthat key. Each time you press the key, thenext character is highlighted.For example, key l:RPress once = ARPress twice = BRPress three times = CWait until the character display disappears.

Operating COMAND 29

At a

Gla

nce

Z

Deleting an EntryX To delete individual characters: Selectõ at the bottom right of the speller andpress 9.

orX Press the 2 button.X To delete an entire entry: Select õ

and press and hold 9 until the entire entryis deleted.

orX Hold the 2 button down until the entire

entry is deleted.

Canceling an EntryX Select á at the bottom left in the speller

and press 9.orX Press the k button.

COMAND goes one step back in theselection procedure.If you press and hold the k button,COMAND shows the basic display of thecurrent operating mode (e.g. radio display).

Accepting the First List EntryX Press and hold 9 until the Enter

Destination menu appears.Here you will find the accepted list entry.

orIf COMAND can match the charactersentered definitively to one town, the EnterDestination menu appears automatically withthe selected list entry.

Switching to the List Without PredictiveSpellerIf other entries for a town exist, or the nameexists more than once in the system, thend is highlighted in the speller.X Press 9.You can switch to the list at any point whileentering characters.

X Press 9 repeatedly until the list appearswithout the speller.

orX Select d and press 9.

COMAND will complete your entry if thename is unambiguous. In this case it is notnecessary to switch to the list, the EnterDestination menu will appear.

Selecting a list entry

Town list in navigation mode

X To select a town:Press 9 or :.X To confirm selection: Press 9.

Operating Example

Switching to Radio Mode and Calling upthe Station ListInitial situation:You would like to switch, for example, fromthe phone function to radio mode and requestthe presets list from there.

i In this guide, the path to a menu item isshown as an action in a special typeface.Audio£Audio£FM/AM Radio£Radio£Presets.

i Depending on the initial situation, thissequence of actions may be shorter.If radio mode was active last, it is sufficientto select Audio£Radio£Presets.

30 Operating COMANDAt

a G

lanc

e

The individual steps for the above exampleare described below.

Switching to the Current Audio Modei You can also call up the current audio

mode with the buttons $ or h.

X To move to the main function line:Press 9.

X To select the audio main function:Press ; or =.

X To confirm your selection: Press 9.The main display of the previous audiooperating mode, e.g. CD audio, appears.The selection bar is located in the Mainarea.

1 Selection bar

Switching to Radio ModeX To select Audio again: Press 9.

X To confirm selection: Press 9.The Audio menu appears.

X To select FM/AM Radio: Press 9.X To confirm selection: Press 9.

The radio main display appears.

Tuning to a Station ManuallyX Press : to highlight the lower menu bar.X Press ; or = to select FM, AM or WB.X Tune to a staion by pressing ; or=.The red line (tuning indicator) moves rightor left and stops when a receivable stationis found.

Basic Functions of COMAND

i The COMAND components can be foundon page (Y page 20). Operating examplescan be found on (Y page 28).

i For many operating functions you canalso use the buttons on the multifunctionsteering wheel, e.g. for volume setting theW, X buttons, (Y page 24).

Switching COMAND On/Off X Press the q button.

A warning message appears. COMANDopens the last active menu.

Basic Functions of COMAND 31

At a

Gla

nce

Z

Mute X To switch on/off: Press the x button.

The sound from the active audio or videosource is switched on or muted.

i When the sound is muted, you will see theX icon in the status bar.If you change the audio or video source orchange the volume, the sound isautomatically switched on again.

i Announcements from the navigationsystem can still be heard with the soundswitched off.

Switching Navigation AnnouncementsOn/OffX Press x during the announcement.The navigation announcements are switchedon again if you start a new route guidance orif COMAND is switched off and on with theq button.

i The navigation announcements can alsobe switched back on by selecting thesoftkey + in the navigation menu.

Setting the Volume X To set: Turn the q rotary/push button.orX Press the W or X button on the multi-

function steering wheel.The volume of the selected audio or videosource changes.

Volume of Navigation AnnouncementsYou can set the volume for navigationannouncements independently of the volumefor the active audio or video source.During a navigation announcement:

X Turn the q rotary/push button.orX Press the W or X button on the multi-

function steering wheel.

Setting Volume for Phone CallsYou can adjust the volume for hands-freemode during a telephone call.During a telephone call:X Turn the q rotary/push button.orX Press the W or X button on the multi-

function steering wheel.

Sound Settings You can select different sound settings foreach audio and video source. The soundmenu can be opened from the submenu of thedesired operating mode.Examples:RAudio£FM/AM Radio£SoundRAudio£Disc£Sound

Setting Bass and TrebleX Select Sound£Treble or Bass.

The previously selected setting is indicatedby an empty bar.

Setting treble and bass1 Last selected setting2 Current setting

32 Basic Functions of COMANDAt

a G

lanc

e

X To change the setting: Press 9or : until the desired treble and basslevels are set.

X To save setting: Press 9.The setting is stored and the menu isexited.

X To exit the menu without changes: Pressthe k ; or = button.

Setting Balance and FaderThe balance determines whether the soundintensity is higher on the driver’s side or onthe front passenger’s side.The fader determines whether the soundintensity is higher in the front or in the rear ofthe vehicle.X Select Sound£Bal/Fad (balance/fader).

Setting Balance and Fader (display image maydiffer depending on model)1 Current setting

X To change setting: Press9, :, ; or =until the balanceand fader are set as desired.

X To save setting: Press the 9 button.The setting is stored and the menu isexited.

X To exit menu without changes: Press thek button.

Surround Sound Your vehicle is equipped with the harman/kardon LOGIC7® Surround Sound system.You can select between LOGIC7®off andLOGIC7®on.harman/kardon LOGIC7® Surround Sound isavailable for the following operating modes:RRadio (FM only)RHD RadioRSatRadioRCD AudioRDVD Audio (MLP, DTS, PCM and Dolby

Digital audio formats)RMP3 (including SD memory card)RAUXRDVD Video (PCM, DTS and Dolby Digital

audio formats)

i As some DVDs contain both stereo andmulti-channel audio formats, it may benecessary to set the audio format(Y page 141).

i The LOGIC7® on function of the harman/kardon LOGIC7® Surround Sound systemallows playback of discrete 5.1 and stereorecordings with an optimum surroundsound experience for each passenger. Itenables optimum playback of music andfilms on CD or audio and video DVDs withhigh-resolution surround formats, such asMLP, DTS or Dolby Digital. For ideal soundperception from all seats, LOGIC7®

distributes the 5.1 surround informationover the 12-channel architecture. Thisresults in sound characteristics like thoseintended by the sound engineer when theoriginal was recorded.harman/kardon LOGIC7® converts eachtwo-channel stereo sound source intomulti-channel surround sound. LOGIC7®

reads the surround information storedduring the original recording and

Basic Functions of COMAND 33

At a

Gla

nce

Z

distributes it over the 12 channels. Noeffects are created during the process,anything that was always on the recordingis just made audible again. In addition,harman/kardon LOGIC7® moves theperceived sound source away from theloudspeakers and thereby generates anatural 360° sound experience for everypassenger.

i If you select LOGIC7® off, playback of allrecognized formats is as it is on themedium. Due to the design of thepassenger compartment, an optimumaudio experience cannot be guaranteed forall passengers.

i Discs which support the audio formatsmentioned have the following logos:

Dolby Digital

DTS

MLP

Setting surround sound

You can select LOGIC7® on or LOGIC7® offin surround sound mode.X Select Sound£Surround.

Surround sound setting (display image may differdepending on model)

X To select the setting: Press 9or :.

X To save the setting: Press 9.The setting is stored and you exit the menu.

X To exit the menu without changes: Pressthe k, ; or = button.

i Please note the following:RFor the optimum audio experience for all

passengers when LOGIC7® is switchedon, the balance and fade should be set tothe center of the passengercompartment.RYou will achieve the best sound results

by playing high-quality audio and videoDVDs.RMP3 tracks should have a bit rate of at

least 128 kbit/s.RSurround-sound playback does not work

for mono signal sources, such as the AMwaveband in radio mode.RIf the radio reception is poor, e.g. in a

tunnel, you should switch off LOGIC7®

because it may otherwise switchautomatically between stereo and mono

34 Basic Functions of COMANDAt

a G

lanc

e

and therefore distort the soundtemporarily.ROn some stereo recordings, the sound

characteristics may differ fromconventional stereo playback.

Basic Functions of COMAND 35

At a

Gla

nce

Z

36

System Menu Overview ...................... 38Switching the Display On/Off ............ 39Time ...................................................... 39Language Setting ................................ 40Display Settings .................................. 40Read-Out .............................................. 41Voice Control ....................................... 41Rear View Camera ............................... 42Bluetooth ............................................. 43Reset .................................................... 45

37

Syst

em S

ettin

gs

System Menu Overview

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Opening System Menu X Press the W function button.orX Select System in the main function line.

The system menu appears.

1 Settings menu2 Switching off the display

Settings Display Off

Time(Y page 39)Language(Y page 40)Display(Y page 40)Text reader speed(Y page 41)Voice Control(Y page 41)Rear View Camera(Y page 42)Bluetooth®

Reset(Y page 45)

i Use this functionto delete yourpersonal data,e.g. before sellingyour vehicle.

(Y page 39)

38 System Menu OverviewSy

stem

Set

tings

Switching the Display On/Off

X To switch the display off: Select System£Display Off.The display is switched off.

X To switch on the display: Press the 9button, the k button or one of the=, ;, : or 9 buttons.

orX Press the q button.

The system menu appears.

i You can also press one of the functionbuttons, e.g. the h button. This turns onthe display and switches to thecorresponding function.

Time

Setting the Time i The correct time must be set for the

following navigation system functions tooperate correctly:RCalculation of expected time of arrivalRTime stamps for calls received and calls

dialed

X Select System£Settings£Time£Set Time.

1 Sets the time2 Current date

X To set value: Press : or 9.

X To save setting: Press 9.

i The increment for setting the minutesdepends on the situation. It is 30 minutesif the vehicle is equipped with a navigationsystem and if GPS is being received. It isone minute if GPS reception is notavailable.

i If you change the time in 30 minute steps,previously selected settings for time zoneand switching between summer time andstandard time are lost.(Y page 39).

Setting the Date/Time Format X Select System£Settings£Time£Format.The format list appears. The dots R infront of the list entries indicate the currentsetting.

i The abbreviations mean:Date format: DD - Day, MM - Month, YY/YYYY - YearTime format: HH - Hour, MM - Minute foreither 24-hour clock or AM/PM format

X To change format setting: Press : or9.

X To confirm selection: Press 9.X To save setting and quit menu: Press= or ;.

Setting the Time Zone and SwitchingBetween Daylight Saving Time andStandard Time

i The correct time zone and daylightsaving/standard time must be set for thefollowing navigation system functions tooperate correctly:RCalculation of expected time of arrivalRTime stamps for calls received and calls

dialed

Time 39

Syst

em S

ettin

gs

Z

X To set the time zone: Select System£Settings£Time£Time Zone.A time zone list appears. The R dotindicates the current setting.

X Press : or 9 to select theappropriate time zone.

X To switch between Daylight Saving andStandard Time: Select Daylight SavingTime (Summer) or Standard Time(Winter).The R dot indicates the current setting.

X To save setting and exit menu:Press = or ;.

Language Setting

This function allows you to determine thelanguage for the menu displays and thenavigation messages. The language selectionaffects the input options in the editing andsmart speller.X Select System£Settings£Language.

The language list appears. The R dotindicates the current setting.

X To change setting: Press : or 9 toselect the desired language.

X To confirm the language selection:Press 9.COMAND loads the selected language andsets it.

i If you change the system language, thelanguage for Voice Control will be also bechanged. If the selected language is notsupported by the Voice Control system,“English” will be selected.

Display Settings

Adjusting Brightness X Select System £ Settings £ Display£ Brightness.

1 Brightness bar

X To adjust brightness: Press 9or :.The brightness bar moves up or down.

X To confirm selection: Press 9 or press=.

orX Press the k button.

Setting the Display Design X Select System£Settings£Display.

X Select Day mode, Night mode orAutomatic.The R dot indicates the current setting.

i In the Automatic setting, COMANDevaluates the automatic vehicle lightsensor and automatically switches over thedisplay design.

40 Display SettingsSy

stem

Set

tings

Read-Out

Setting reading Speed X Select System£Settings£TextReader Speed.The list of possible settings appears. TheR dot indicates the current setting.

X Select the desired speed.X To confirm your selection: Press 9.

Voice Control

Switching the Help Screen On or Off X Select System£Settings£VoiceControl.

X Select Help Window.You have switched the help window onÇ or off c.

i In addition to the audible instructions, thehelp screen displays other informationduring the individualization process and thelater voice control mode.

Individualization Function You can use the individualization functionoption to adapt the Voice control system toyour own voice and therefore improve voicerecognition. This will affect the ability of thesystem to recognize the voices of other users,and for this reason it can be switched off(Y page 42).The individualization function comprises twoparts and lasts around five minutes. Duringthe process you will practice a few numbersequences and voice commands.

Starting New Individualization Processi You can only start the individualization

function when the vehicle is stationary.First switch off all interfering units/functions. After starting, the system will

take you through the training by means ofaudible instructions.

X Select System£Settings£VoiceControl£Start NewIndividualization.You see and hear a prompt asking whetheryou would like further information.

X Select Yes or No.If you select No, the first part ofindividualization begins. You hear a promptasking whether you would like to train thesystem in numbers or in voice commands.If you select Yes, an information screen willappear and you will hear information aboutthe sequence of the individualizationprocess. The first part of theindividualization then starts automatically.or

X To close the display: Press 9.You hear a prompt asking whether youwould like to train the system in numbersor in voice commands.

Once the first part is over, you will beprompted to confirm that you wish to start thesecond part.X Select Yes or No.

If you select No, individualization will becanceled. The data from the first part issaved automatically.If you select Yes, the second part of theindividualization will start.

The individualization is ended once thesecond part has been completed. A

Voice Control 41

Syst

em S

ettin

gs

Z

corresponding message is displayed. Thedata from the second part is savedautomatically.

Canceling the First or Second Part ofIndividualizationX Select Cancel.

You will be prompted to confirm that youreally wish to cancel.

X Select Yes or No.If you select Yes, individualization will becanceled.The data from the canceled partwill be lost.If you select No,the canceled part of theindividualization will restart.

Deleting Existing Individualization DataX Select System£Settings£VoiceControl£DeleteIndividualization.You will be prompted to confirm that youreally wish to delete it.

X Select Yes or No.The individualization data will be deleted orretained on the basis of the selection. Acorresponding message is displayed.

Switching Individualization On and OffX Select System£Settings£VoiceControl £ Individualization On.This switches the individualization on Ç oroff c.

Rear View Camera

COMAND shows the camera picture on thedisplay whenRthe function is switched on in the SystemSettings menu andRthe vehicle is shifted into reverse gearAs soon as you shift out of reverse gear, theprevious display is shown.

Switching On/Off the Display of theRear View Camera X Switch to System Menu

System settings menu with Rear View CameraoptionX Select Settings£Rear View Camera.X Select Activation by R gear.

Depending on the previous state thefunction is switched on Ç or offc.

42 Rear View CameraSy

stem

Set

tings

Bluetooth

General Information AboutBluetooth®

i Bluetooth-capable devices mustcorrespond to a particular profile to beconnected to COMAND. Every Bluetoothdevice has a Bluetooth-specific name.

Bluetooth® technology is the standard forshort-range wireless data transmission of upto approximately 30 feet. Bluetooth® can beused to exchange vCards, for example.Bluetooth® is a registered trademark of theBluetooth Special Interest Group (SIG) Inc.

Switching Bluetooth®On or Off X Select System£Settings£Bluetooth£Activate Bluetooth.Bluetooth is switched on Ç or offc.

Connecting Bluetooth Devicesi To connect a Bluetooth device, the

Bluetooth function must be switched on inCOMAND and on the particular device. TheBluetooth device must also be “visible” toCOMAND in order for COMAND to find anddisplay it. For the setting procedures,please see the operating instructions forthe Bluetooth device.

It is possible to establish a Bluetoothconnection between COMAND and thefollowing types of device:RMobile phone

i Bluetooth-enabled mobile phones mustcorrespond to particular profiles to beconnected to COMAND.The volume of telephone conversations canchange after the phone has beenconnected.RPortable personal computerYou can connect up to ten devices toCOMAND.The connection process includes searchingfor the device and its subsequentauthorization.

Opening the Bluetooth Device Listand Searching for a Device

i You must first switch on Bluetooth to beable to call up the list of Bluetooth devices(Y page 43).

X To open the list: Select System£Settings£Bluetooth £Bluetooth Device List.

X To start the search: Select Update.COMAND starts the search for deviceswithin reception range. The device listappears after a short time.

i If you open the device list again, it maynot display all devices as you may haveremoved one from the car for a while, forexample. In this case, start a new search toupdate the device list.

X To cancel search: Select Cancel.The device list can contain the followingdevices:RAll (available) devices found, regardless of

whether they have been authorized or not.RAll authorized devices, regardless of

whether they have been found (areavailable) or not.

The device list may show the following iconsimmediately after manual updating:

Bluetooth 43

Syst

em S

ettin

gs

Z

1 Currently connected R and authorizeddevice (here a mobile phone L)

2 Device not within range but previouslyauthorized (¿ appears in grey)

3 Newly detected device within range butnot yet authorized (no icon)

Phone icons indicate if a phone is found(black) or not (grey).The check marks indicate if a phone has beenauthorized (black) or not (grey).

i If the device list already contains tenauthorized devices, you will have towithdraw the authorization for (de-authorize) one of the authorized devices(Y page 45). You will then have to switchthis device off and start the search again.Otherwise the new device you are lookingfor will not appear in the list.

i If you reopen the device list at a later time,it will contain all previously authorizeddevices.

Displaying Details About a BluetoothDevice X Open the Bluetooth device list

(Y page 43).X Select the desired device.

X Select Options£Details.The detailed display for this deviceappears.

X To close detailed view: Press : or9.

Authorizing a Bluetooth Device X Open the Bluetooth device list

(Y page 43).X Select Update.X Select the unauthorized device (no check

mark yet).

i If the authorization of a device, which hadbeen authorized in the past, has beenwithdrawn and it is no longer found in thesearch, the device list no longer includesthis device. Devices that have beenauthorized in the past but not found in thesearch are either not switched on or are notin the vehicle.

X Select Options£Authorize.The input menu for the passcode appears.

X To enter passcode in COMAND: Selectdigits one after another.

i The passcode is any number withbetween one and sixteen digits that youcan select yourself. You must enter thesame number on COMAND and on thedevice to be authorized. Please also referto the instructions in the Bluetooth devicemanual.

44 BluetoothSy

stem

Set

tings

X To cancel entry: Select Back.X To confirm entry: Select ¬.X Enter the same passcode on the Bluetooth

device (Y operating manual for therelevant device).The device is authorized.

External Authorization If COMAND cannot find your mobile phone,this may be due to special security settingson your mobile phone. In this case, you cancheck whether, conversely, your mobilephone can find COMAND.COMAND's Bluetooth device name is “MBBluetooth”.X Select System£Settings£Bluetooth£Bluetooth DeviceList£Options£ExternalAuthorization.

X Start Bluetooth search procedure on themobile phone (Y mobile phone operatingguide).

X Select COMAND (“MB Bluetooth”) from thedevice list on your mobile phone.

X When prompted to do so, enter thepasscode on the mobile phone and onCOMAND.

De-authorizing a Bluetooth Device X Open the Bluetooth device list

(Y page 43).X Select the authorized device.X Select Options£De-authorize.

You will be asked whether the deviceshould really be de-authorized.

X Select Yes or No.If you select Yes, the authorization of thedevice is withdrawn.

Reset

i You can fully reset COMAND to thefactory settings. This process deletes allpersonal data, among other things, (e.g.station memory, address book entries,entries in the destination memory and inthe last destinations of the navigationsystem). It is recommended that youperform a reset before the vehicle ishanded over or sold, for example.

X Select System£Settings£Reset.You will be prompted to confirm that youwish to perform the reset.

X Select Yes or No.If you select Yes, you will again beprompted to confirm that you wish toperform the reset.

X Select Yes or No.If you select Yes, COMAND is reset andrestarted.

Reset 45

Syst

em S

ettin

gs

Z

46

Introduction ......................................... 48Destination Input ................................ 61POI Input .............................................. 73Route Guidance ................................... 80Traffic Messages ................................. 87Destination Memory ........................... 90Last Destinations ................................ 94

47

Navi

gatio

n

Introduction

Vehicle Equipmenti This Operator’s Manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Safety Instructions

G WarningFor safety reasons, only enter a destinationwhen the vehicle is stationary. When thevehicle is in motion, a passenger should enterthe destination. Study manual and selectroute before driving.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.COMAND calculates the route to thedestination without taking account of thefollowing:RTraffic lightsRStop and right-of-way-signsRLane mergingRParking or stopping prohibited areasROther road and traffic rules and regulationsRNarrow bridges

G WarningCOMAND may give incorrect navigationcommands if the data in the digital map doesnot correspond with the actual road/trafficsituation. Digital maps do not cover all areasnor all routes within an area. For example, ifthe traffic routing has been changed or thedirection of a one-way road has beenreversed.For this reason, you must always observeapplicable road and traffic rules and

regulations during your journey. Road andtraffic rules and regulations always havepriority over the navigation commandsgenerated by the system.

G WarningNavigation announcements are intended todirect you while driving without diverting yourattention from the road and driving.Please always use this feature instead ofconsulting the map display for directions.Consulting the symbols or map display fordirections may cause you to divert yourattention from driving and increase your riskof an accident.

Updating the Map Software The digital data for the map software willbecome obsolete, just like conventional roadmaps. Optimum route guidance by thenavigation system is only achieved with up-to-date map software. Information on newmap software versions is available from anauthorized Mercedes-Benz Center.You can have the map software updated thereby means of a DVD or perform the updateprocess yourself.

Notes on DVD DiscsROnly touch the discs at the edges.RHandle the discs with care in order to

prevent reading errors.RAvoid scratching, leaving fingerprints and

dust on the discs.RUse a commercially available cleaning cloth

to clean discs. Always wipe in a straight linefrom the inside outwards, never in a circularmotion.RAfter use, put the discs back into the box.RProtect the discs from heat and direct

sunlight.

48 IntroductionNa

viga

tion

Update SequenceThe sequence includes the following stages:RLoading DVD into the DVD changerRUpdate process

i The update process may take between 60and 150 minutes, depending on the size ofthe map software.If possible, perform the update when thevehicle is stationary. The DVD read speedis faster when the vehicle is stationary thanwhen the vehicle is moving and the updatetherefore takes less time. If you performthe update with the engine off and thevehicle battery is no longer powerfulenough, COMAND may shut offautomatically during the process to protectthe battery. In this case, restart the updatewith the engine running.You can interrupt the update process andcontinue it at later time. If you cancel theupdate process, the navigation system isnot ready for operation.

G WarningNever leave the engine running in an enclosedspace. The exhaust gases contain carbonmonoxide. Inhaling exhaust gases constitutesa health hazard and could lead to loss ofconsciousness or even death.

Loading DVDs into DVD ChangerThe 6-disc DVD changer is integrated withCOMAND.

1 Load/Eject button2 Disc slot

X Press the Load button 1.A disc icon indicates which magazinecompartments are currently loaded.

X To select an empty magazinecompartment: Press ; or =.

X To start loading: Press 9.The message Please Insert Disc <x>will then be displayed.

X Insert the DVD into the slot with the printedside upwards.The DVD changer pulls in the DVD. Themessage Loading Disc <x>... will bedisplayed.

i If the magazine is full, you will first needto eject a disc (Y page 134).

Update ProcessThe update process starts once the DVD hasbeen loaded.COMAND checks whether the map softwareon the DVD matches the vehicle's navigationsystem and system software.

Map Software Is not Suitable for theNavigation System or the SystemSoftwareA message is displayed stating that thenavigation update DVD with the new mapdata is not suitable for the system or thesystem software.COMAND ejects the DVD.X Remove the DVD from the slot 1.X Have the system software updated by an

authorized Mercedes-Benz Center.

i It will only be posssible to update the mapsoftware once the system software hasbeen updated.

Map Software Matches the NavigationSystem and the Current System SoftwareCOMAND checks whether the DVD's mapdata has already been installed.

Introduction 49

Navi

gatio

n

Z

Map Data Is Already InstalledThe version release and a correspondingmessage will be given on the display.X To confirm message: Press 9.

COMAND ejects the DVD.

Map Data Is not yet InstalledThe version release and a query as to whetherthe update should be carried out will be givenon the display.X Select Yes or No.

If No is selected, COMAND ejects the DVDautomatically and the map data is notupdated.

X Remove the DVD from the slot.If Yes is selected, the map data is updated.

Updating the Map DataWhile the update is in progress, acorresponding message and a progress barare displayed. The progress bar fills from leftto right over the course of the update. Thenavigation system is not functional until theupdate is complete.You cannot eject the DVD during the update.If you switch COMAND off during the update,this will interrupt the update and the updatewill resume at the point of interruption whenthe system is restarted.While updating, COMAND may prompt you tochange the DVD. A corresponding messageis then displayed.X Press the Eject button 8.

COMAND ejects the DVD.X Remove the DVD from the slot.X Insert the DVD requested by COMAND.

If the update has been completedsuccessfully, a corresponding message isdisplayed.

X To confirm message: Press 9.COMAND ejects the DVD.

X Remove the DVD from the slot.The update is complete.

If the update has not been completedsuccessfully, a message is displayed

indicating that the map update is notpossible.X To confirm message: Press 9.

COMAND ejects the DVD.X Remove the DVD from the slot.An unseccussful update may be caused byone of the following:RDVD dirty or scratched.

X Clean the DVD.Please refer to the “Notes on DVDdiscs” section (Y page 48).

X Restart the update.

ROverheating as a result of excessively hightemperatures in the passengercompartment.X Wait until the passsenger

compartment has cooled down.X Restart the update.

RThe memory medium (hard drive)integrated into COMAND has a physicaldefect.X Contact an authorized Mercedes-Benz

Center.

General Information

Operational Readiness of theNavigation System after the SystemSoftware UpdateSometimes the installed map software is nolonger compatible following a systemsoftware update by an authorized Mercedes-Benz Center. In this case, the navigationsystem is not operational.X To update map software: Proceed as

described in the “Update Process” section(Y page 49). Use map software compatiblewith the system software.

i Please note that in this case the updatemust run through right to the end. If youcancel beforehand, the navigation systemwill still not be ready for operation.

50 IntroductionNa

viga

tion

After start-up or initial start-up, the navigationsystem must perform a position findingoperation. As a result, you may have to drivefor some time until precise route guidancetakes place.

GPS ReceptionThe correct functioning of the navigationsystem is also dependent on the GPSreception. In certain situations, the GPSreception may be impaired, distorted or evenimpossible, e.g. in tunnels, multi-storey carparks or due to snow on the GPS antenna. Ifthere is snow on the GPS antenna, you shouldremove it. The GPS antenna is at the rear onthe vehicle's roof.

Route Guidance after VehiclesTransportAfter vehicle transport (e.g. by ferry, car trainor by towing) COMAND must determine thevehicle location again.Position finding takes place automaticallywhen the vehicle is driven off again, even ifCOMAND is switched off. The actual length oftime may vary from case to case.While the vehicle is determining its position,route guidance is subject to the followingrestrictions:RNavigation announcements, route

guidance displays and displayed streetnames do not match the actual location.RCOMAND does not issue any navigation

announcements.RThe message Off Mapped Road and a

direction arrow are displayed instead of theroute guidance displays. The arrowindicates the direction of the destination.

i Direction arrow accuracy is alsodependent on correct vehicle positionand/or direction.

Once the position finding operation has beencompleted, route guidance takes place again

via navigation announcements and routeguidance displays.

Interrupting Journey during RouteGuidancei An interruption in the journey means

parking the vehicle and switching offCOMAND.The continuation of the journey meansswitching COMAND on again andcontinuing to drive.

If interrupt the journey during route guidanceand continue it later, the following applies:RIf you continue the journey within 2 hours,

COMAND automatically continues routeguidance.RIf you continue the journey after 2 hours,

route guidance is cancelled. You will haveto continue the cancelled route guidanceagain manually .

Hard Disk DriveCOMAND has an integrated hard drive onwhich the map software is stored.If an area of the hard drive has a fault,COMAND can no longer access the map datain that area for the route calculation, forexample.The message Navigation Unavailable willthen be displayed.X To delete message: Switch COMAND off

and back on again.

i After switching on/off, the navigationsystem will remain functional until it has toaccess the faulty area of the hard driveagain. The message will be displayed again.Contact a Mercedes-Benz Service Center.

Introduction 51

Navi

gatio

n

Z

Measurement UnitsThe measurement units displayed innavigation mode are identical to those set inthe instrument cluster.

Input Restriction There is an input restriction for vehicles forcertain countries.The restriction is active for vehicle speedsabove apprx. 3 mph. The restriction isdeactivated as soon as the speed falls belowapprx. 2 mph.Certain entries cannot be made when therestriction is active, e.g. a city or road entry.This is indicated by the fact that certain menuitems cannot be selected.

Menu Overview

Navi

Selecting map display

Setting route calculation mode

Setting Block Area

Save Off-road Route

Selecting information on map

Switching highway information on/off

Switching Audio Fadeout on/off

52 IntroductionNa

viga

tion

Navi Submenus

Guide Traffic Route (withactive routeguidance)

Position 6 (withactiverouteguidance)

Destination

SelectingPOI indepictedmapsegment, ifavailable

DisplayingTrafficMessages

OpeningdetourfunctionHavingalternativeroutecalculatedOpeningdestinationinformationOpeningroutebrowser

Save vehiclelocation orcrosshairsposition

i Thecrosshairspositioncan besaved ifthecrosshairsaredisplayedon themap, e.g. .

DisplayvehiclepositionmapDisplaydestinationpositionmap

Repeatingcurrentnavigationannouncement

Cancel routeguidanceEnteringdestinationRvia addressRfrom memoryRfrom “Last

destinations”memoryRas POIRvia mapRas stopover

destinationSavingdestination

Switching to Navigation ModeX Press the function button Ø.orX Select Navi in the main function menu.

This displays the map with the menusystem either displayed or hidden.

i If the message Please insert the mapDVD to activate Navigation. appearsinstead of the map display, see(Y page 48). Map without activated route guidance and with

menu system displayed1 Menu system, status line2 Menu system, with main functions

Introduction 53

Navi

gatio

n

Z

3 Current vehicle location4 Menu system, navigation submenu

Map without activated route guidance and withmenu system hidden1 Current vehicle location2 Set map orientation (Y page 55)3 Set map scale (Y page 54)

Displaying/Hiding Menu SystemX To hide: Press 9 or : and when the

menu item Full screen is displayed press9.The menu system is hidden. This displaysthe map in full screen mode.

X To display: In full screen map mode press9.

orX Press the function button Ø.

Setting Map ScaleX To set the map scale: Press U orT.The map scale 3 is displayed.

1 Scale2 Pointer indicating the currently set map

scale3 Currently set map scale as number

Saving Current Vehicle Location asDestination in the Last DestinationsX To display menu system if applicable:

Press 9.X To save: Select Position£SaveVehicle Position.COMAND saves the current vehiclelocation as destination in the lastdestinations memory (Y page 94).A window appears containing acorresponding message.

X To exit menu: Press =, ; or thek button.

Scrolling the Mapi You can only scroll the map when the

menu system is hidden (map in full-screenmode).

X Hide menu system if applicable(Y page 54).

X Press 9, :, ; or =.Crosshairs will appear on the map.

54 IntroductionNa

viga

tion

1 Current vehicle location2 Crosshairs3 Information on crosshairs position4 Set map scale

i The display item 3 may for example bea road if corresponding data is available inthe digital map and Current Street isactivated. Or it displays the geo-coordinateposition of the crosshairs if Geo-coordinates display is activated(Y page 60).

Saving Crosshairs Position as Destinationin the last DestinationsX To display menu system if applicable:

Press 9.X To save: Select Position£SaveCrosshair Position.COMAND saves the crosshairs position asa destination in the last destinationsmemory (Y page 94). A window appearscontaining a corresponding message.

Hiding CrosshairsX Press the k button.

The crosshairs disappear and the map isset to the vehicle location.

orX Set the map to the vehicle location, see

description below.

Setting Map to Vehicle or DestinationLocationi If you have moved the map, you can

quickly move the map to the vehicle ordestination location using this function. Itis only possible to set it to the destinationlocation when route guidance is active.

X To display menu system if applicable:Press 9.

X To set map to vehicle location: SelectPosition£Vehicle Position Map.This hides the crosshairs.

orX Press the k button if the crosshairs are

displayed.This hides the crosshairs.

X To set the destination location: SelectPosition£Destination PositionMap.The crosshairs position is then set to thedestination.

Basic Settings You can perform the settings listed belowwith route guidance inactive or active.

Map Display

Map Orientation

1 Currently set map orientationThe following displays are possible:

Introduction 55

Navi

gatio

n

Z

R9= orientation to north (the map displayis oriented to the north, north is always atthe top)R8= Driving direction (the map display is

oriented in the direction of travel, thedirection of travel is always at the top, theorange tip of the symbol pointsnorthwards)R8= Bird's-eye view

(the map display is oriented in the directionof travel, the map projection reproducesthe curvature of the earth's surface, theorange tip the symbol points northwards)

Example of map from bird's-eye view1 Current crosshairs location2 Currently set map orientation

X To set map orientation: Display menusystem if applicable (Y page 55).

X Select Navi£Map Display.A dotR indicates the current setting.

1 Options for map orientation2 Options for POI symbols (Y page 56).

X Select North Up or Heading Up orBird's-eye View.

X To exit menu: Press = or ;.X Hide menu systems if applicable

(Y page 54).The map orientation changes accordingly.

Setting POI SymbolsYou can select which POIs are to be displayedas symbols on the map. Points of interestsinclude, for example, gas station, hotels,cinemas and restaurants.The following settings are available:RStandard Symbols

Displays the factory-set symbolsRPersonal Symbols

You can choose the symbols yourself.R X To set: Display menu system if

applicable (Y page 54).X Select Navi£Map Display.X Select Standard Symbols orPersonal Symbols or No Symbols.If you have selected PersonalSymbols, the list of POIs will bedisplayed.

X To switch symbol display on/off:Select the corresponding POI.Depending on the previous status, thecorresponding symbol displays will beswitched on Ç or offc. You mayalso activate the symbol displays forseveral POIs.

RNo Symbols

i The list indicates all symbols for allcountries that are contained in the digitalmap. However, not all POIs are availbale inall countries. As a result, certain POIsymbols may not be shown on the mapeven though the symbol displays isswitched on.

56 IntroductionNa

viga

tion

X To exit menu: Press = or ;.X Hide menu system if applicable

(Y page 54).

Route ModeThis function allows you to set the followingoptions for route guidance:RAvoid HighwaysRAvoid Toll RoadsRAvoid TunnelsRAvoid FerriesRAvoid AutoTrains

1 Sets route options

Setting Route OptionsX To set: Display menu system is applicable

(Y page 54).X Select Navi£Mode.X To switch option on/off: Select required

option.Depending on the previous status, theoption will be switched on Ç or offc.You may activate several options.

i The calculated route may include ferryconnections, for example, even if theoperation Avoid Ferries has beenactivated.

i If you change the route type setting whenroute guidance is active, COMANDcalculates a new route.

Block AreaYou can define an area within the map displaythat is not to be used by the system incalculating a route, if possible.

i The calculated route may include ablocked area if the destination is within ablocked area or if the destination can onlybe reached using roads that lead through ablocked area. Highways cannot be blocked.

X To set, change or delete: Display menusystem if applicable (Y page 54).

X Select Navi £Block Area.If no areas were previously set, the mapdisplay appears ready to select an area.If areas were previously set, the blockedarea list appears.

X To move the map: Press9, :,; or =.

X To set the map scale: Press U orT.The map scale is displayed.

X To enlarge the map: Press U.X To reduce the map: Press T.X To set the blocked area: Press 9.

The blocked area appears in red.X Press U or T to change the size of

the blocked area.X Press 9.

The area is added to the blocked area list.

Introduction 57

Navi

gatio

n

Z

A checked entry indicates an active blockedarea.

i You can block several areas for the routecalculation and activate or de-activatethem by setting or removing the checkmark.

Displaying and Changing an ExistingBlock AreaX To select the area you want to display

or change: Press 9 or :.X Select Display/Change.

The map display appears with the blockarea marked red.

X Press U or T until the desired sizeof the block area is set.

X Press 9, :, ; or = to shift theblock area to the desired region.

X To confirm the area and exit mapdisplay: Press 9.

X Hide menu system if applicable(Y page 54).

Defining a New Block AreaX Select Avoid New Area

The map display appears with a default newblock area in red.

X Press U or T until the desired sizeof the new block area is set.

X Press 9, :, ; or = to shift thenew block area to the desired region.

X To confirm the area and exit mapdisplay: Press 9.

X Hide menu system if applicable(Y page 54).

Deleting a Block AreaX To select the area you want to delete:

Press 9 or :.X Select Options£Delete.

You will be prompted to confirm that youwish to delete the block area.

X Select Yes or No.If you select Yes COMAND deletes theentry. A message will be displayed.

Saving an Off-road RouteIf this function is switched on, an Off-roadroute is recorded and stored.

Switching the Function On/OffX Show the menu system, if necessary

(Y page 54).X Select Navi£Save Off-road Route.X Select Save Off-road Route in the

submenu.Depending on the previous state, switchthe option on Ç or off c.

Displaying Memory Usagei When the memory is 90% full, you see a

corresponding message. When thememory is full, the function is no longeravailable and a message appears.

58 IntroductionNa

viga

tion

X To confirm the message: Press 9.

i In order to be able to continue using the“Save off-road route” function, you shoulddelete the route memory afterwards.

X Show the menu system, if necessary(Y page 54).

X Select Navi£Save Off-road Route£Off-road Route Memory.

A bar shows the memory usage as apercentage.

i When the memory is completely full, youcannot select the Route memory menuitem.

Deleting the Route MemoryX Show the menu system, if necessary

(Y page 54).X Select Navi£Save Off-road Route£Delete Off-road Route Memory.

A query appears asking whether the memoryshould be deleted.X Select Yes or No.

If you select Yes, the memory is deleted.

Information on MapYou can have map information displayed atthe bottom edge of the screen during routeguidance.X To set: Display menu system if applicable

(Y page 54).X Select Navi£Information On Map.

A dot R indicates the current setting.X Select Arrival Time/Distance orCurrent Street or Geo-coordinates orNone.

X To exit menu: Press = or ;.X Hide menu system if applicable

(Y page 54).

Time of Arrival/Distance to Destination

Map with display activated for time of arrival/distance1 Symbol for destination2 Distance to the destination3 Symbol for estimated time of arrival4 Estimated time of arrival

i This display can only be seen during routeguidance. In the Move Map function you willsee other data depending on the crosshairsposition, for example a street name if thedigital map supports this data.

Introduction 59

Navi

gatio

n

Z

Current Street

Map with road display activated1 Road name or road number, e.g. for

highways

Geo-Coordinates Display

Map with geo-coordinates display activated1 Current height above sea level (rounded

off to 50 m)2 Coordinates display of the current vehicle

location (latitude)3 Coordinates display of the current vehicle

location (longitude)4 Number of GPS satellites currently being

used.

i Adequate GPS reception must beavailable for all displays. The altitudedisplay 1 may differ from reality becausethe navigation system calculates it usingthe GPS signals.

i In the Move Map function the display 1and 4 are not displayed. The geo-coordinate position of crosshairs isdisplayed.

“None” Menu Option

Map with display switched off1 Currently set map orientation

i In the Move Map function you will seeother data depending on crosshairsposition, for example a road name if thedigital map supports this data.

Highway InformationWhen driving on highways, you can have thenext gas stations, service areas, etc. as wellas the distance to them displayed in the right-hand half of the screen.X To set: Display menu system if applicable

(Y page 54).X Select Navi£Highway Information.

Depending on the previous status, thefunction will be switched offcor onÇ.

Example display: Function on1 Information type: Rest area2 Name of rest area3 Distance from the current vehicle location

60 IntroductionNa

viga

tion

Compass Function You can display a compass representation ofthe current vehicle position and direction.X Select Position£Compass

: Current vehicle direction; Current height above sea level (rounded

to 100 ft)= Current vehicle position: longitude? Number of GPS satellites in useA Current vehicle position: latitudeB Current steering angle of front wheels

i In order to display the height ; thereception of at least four GPS satellites isnecessary.

X To exit the menu: Select BackorX press the k buttonX

Destination Input

Introduction to Destination Input

G Warning!For safety reasons, only enter a newdestination when the vehicle is stationary.

i It is possible to enter a destinationregardless of whether route guidance isactive or inactive.

The following destination input options areavailable:REntering a destination via the address

(Y page 61)REntering a destination from the destination

memory (Y page 69)REntering a destination from the last

destinations (Y page 70)REntering a POI (Y page 73)REntering a destination via the map

(Y page 70)REntering a stopover destination

(Y page 71)REntering a destination via “Search & Send”

(Y page 215)

Entering a Destination via theAddress

i In some countries it is not possible toenter addresses at vehicle speeds aboveapprx. 3 mph. The function becomesavailable again as soon as the speed fallsbelow apprx. 2 mph.

i Set the system language .The following options are available forentering a destination via an address:REntering state/province, city/zip code and

streetREntering state/province, city and city

centerREntering state/province, city/zip code and

street and house numberREntering state/province, city/zip code and

street and junctionRoute calculation can then be started(Y page 68).

Destination Input 61

Navi

gatio

n

Z

Opening Enter Destination MenuX If necessary switch to navigation mode and

display menu system (Y page 54).X Select Destination£Address Entry.

The enter destination menu appears.

Enter Destination menu

Menu Items in Enter Destination MenuSome menu items are not available or not yetavailable, depending on the letters enteredfor the address or the data for the digital map.Example:After the state/province has been selectedthe menu items No., Center,Intersection, Save and Start are notavailable. Or the ZIP menu item is notavailable if the digital map does not containany zip codes.

Selecting a State/Provincei You can only select those states/

provinces that are stored in the digital map.

X Select State/Prov in the EnterDestination menu.A menu appears where you can choose oneof the following lists:RLast States/ProvincesRStates (U.S.A.) orRProvinces (Canada).

X To select a list: Press 9 or :.X Press 9.

The selected state/province list appears.

X To selected a state/province:Press9 or :.

X Press 9.The Enter Destination menu appears again.The selected state/province has beenentered automatically.

Entering a Cityi You can only enter those cities that are

stored in the digital map. Any zip code thathas already been entered is deleted whena city is entered.

X In the Enter Destination menu, selectCity.The city list is displayed with or withoutpredictive speller. The display of thepredictive speller depends on how manycities are available for the selected state/province.

City List with Predictive SpellerIf this list is given in the display, the predictivespeller 8 is activated automatically.

1 Characters entered by the user2 Characters automatically added by the

system3 List entry that best matches the

characters already entered4 Switches to the list without speller5 Press and hold deletes complete entry,

press briefly deletes last character6 Currently unavailable characters7 Currently available characters

62 Destination InputNa

viga

tion

8 Predictive Speller9 Currently selected charactera Cancels an entryb List

i In the predictive speller 8 you can onlyselect characters 7 that are currentlyavailable. The characters that are availabledepends on those already entered and thedata for the digital map.

When entering characters, the list entry 3always displays a city that best matches thecharacters already entered.COMAND automatically adds matchingletters 2 to those characters 1 alreadyentered by the user.

Entering CharactersX To select characters: Press ; or=.

X Press 9 or : to switch between thelines in the speller.

X To confirm character selection:Press 9.

Alternatively, you can enter characters usingthe number keypad (direct input).Example:X Press one of the number keys, e.g. l,

once or repeatedly in succession.After you have pressed it the first time, thecharacter display appears at the loweredge of the display. The first letter availableis highlighted.

You see which characters you can enter withthat key. Each time you press the key, thenext character is highlighted.For example, key l:RPress once = ARPress twice = BRPress three times = CWait until the character display disappears.

Deleting an EntryX To delete individual characters: Selectõ at the bottom right of the speller andpress 9.

orX Press the 2 button.X To delete an entire entry: Select õ

and press and hold 9 until the entire entryhas been deleted.

orX Press and hold the 2 button until the

entire entry has been deleted.

Canceling an EntryX Select á at the bottom left of the speller

and press 9.orX Press the k button.

The Enter Destination menu appears.

Accepting First List EntryX Press and hold 9 until the Enter

Destination menu appears.Here you will find the accepted list entry.

orX If COMAND can match the characters

entered definitively to one city. The EnterDestination menu appears automaticallywith the selected list entry.

Switching to the City List withoutPredictive SpellerIf other entries for a city exist, or the nameexists more than once in the system, thend is highlighted in the speller.

Destination Input 63

Navi

gatio

n

Z

X Press 9.You can switch to the list at any point whileentering characters.X Press 9 repeatedly until the list appears

without the speller.orX Select d and press 9.

City List without Predictive Speller

X To select a city: Press 9 or :.X To cancel selection: Select Back and

press 9.orX Press the k button.X To confirm selection: Press 9.

The Enter Destination menu appears againin the display.COMAND has accepted the selected cityand entered it automatically in the EnterDestination menu.

Entering a Zip Codei You can only enter those zip codes that

are stored in the digital map. For somecountries it is not possible to enter any zipcode.

X In the Enter Destination menu select ZIP.The zip code list is displayed with or withoutpredictive speller (Y page 62). The displayof the predictive speller depends on howmany zip codes are available for theselected state/province.

Zip Code List with Predictive SpellerIf this list is given in the display, the predictivespeller 9 is activated automatically.

1 Numbers entered by the user2 Numbers automatically added by the

system3 List entry that best matches the

characters already entered4 Switches to list without speller5 Press and hold deletes complete entry,

press briefly deletes last character6 Currently available digits7 Currently selected digit8 Currently unavailable digit9 Predictive Spellera Cancels entryb List

i In the predictive speller 9 you can onlyselect digits that are currently available.The characters that are available dependson those already entered and the data forthe digital map.

When entering a digit, the list entry 3 alwaysdisplays a zip code that best matches thecharacters already entered. COMANDautomatically adds digits 2 to those digits1 already entered by the user.For the steps ofREntering charactersRDeleting an entry

64 Destination InputNa

viga

tion

RCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “City List withPredictive Speller” (Y page 62).orIf COMAND can match the charactersentered definitively to one city, the EnterDestination menu appears automatically withthe selected list entry.

Switching to the Zip Code List withoutPredictive SpellerYou can switch to the the list at any pointwhile entering characters.X Press 9 repeatedly until the list appears

without the speller.orX Select d and press 9.

ZIP Code List without Predictive Speller

X To select a zip code: Press 9or :.

X To cancel selection: Select Back andpress 9.

orX Press the k button.

X To confirm selection: Press 9.If COMAND can assign the zip code to aunique address, the Enter Destination menuis displayed again. The address data has beenentered automatically. Now you can start theroute calculation (Y page 68).

If COMAND is unable to assign the zip to aunique address, the Enter Destination menuis also displayed again. The zip code has beenentered automatically. To further limit thechoice, you can now enter the street. Whenentering the street, only those streets withinthe area of the entered zip code are available.

Entering a Streeti Any city center that has already been

entered is deleted when a street is entered.You can only enter those streets that arestored in the digital map.

X In the Enter Destination manu selectStreet.The street list is displayed with or withoutpredictive speller. The display of thepredictive speller depends on how manystreets are available for the selected city,state or province.

Street List with Predictive SpellerIf this list is given in the display, the predictivespeller 2 is activated automatically.

1 List entry that best matches thecharacters already entered

2 Predictive speller

i In the predictive speller 2 you can onlyselect characters that are currentlyavailable. The characters that are availabledepends on those already entered and thedata for the digital map.

For the steps of

Destination Input 65

Navi

gatio

n

Z

REntering charactersRDeleting an entryRAccepting first list entryRCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “City list withpredictive speller” (Y page 62).

Street List Without Predictive Speller

X To select a street: Press 9 or :.X To cancel selection: Select Back and

press 9.orX Press the k button.X To confirm selection: Press 9.The Enter Destination menu appears again.COMAND has accepted the selected streetand entered it automatically in the EnterDestination menu.Now you can start the route calculation(Y page 68).

Entering a City Centeri You can only enter those city centers that

are stored in the digital map.

X In the Enter Destination menu selectCenter.The city center list is displayed.

X To select a city center: Press 9or :.

X To cancel selection: Select Back andpress 9.

orX Press the k button.X To confirm selection: Press 9.

After the confirmation, the EnterDestination menu appears again. COMANDhas accepted the selected city center andentered it automatically in the EnterDestination menu.Now you can start the route calculation(Y page 68).

Entering a House Numberi It's not possible to enter house numbers

until street has been entered. You can onlyenter house numbers that are stored in thedigital map. The digital map does notcontain all house numbers for all streets.

X In the Enter Destination menu select No..The house number list is displayed with orwithout predictive speller. The display ofthe predictive speller depends on howmany house numbers are available for theselected street.

House Number List with PredictiveSpellerIf this list is displayed, the predictive speller3 is activated automatically.

66 Destination InputNa

viga

tion

1 List entry that best matches thecharacters already entered

2 List3 Predictive speller

i In the predictive speller 3 you can onlyselect digits that are currently available.The set of characters that is availabledepends on those already entered and thedata for the digital map.

For the steps ofREntering digitsRDeleting an entryRAccepting first list entryRCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “City list withpredictive speller” (Y page 62).

House Number List Without PredictiveSpeller

X To select a house number: Press 9or :.

X To cancel selection: Select Back andpress 9.

orX Press the k button.X To confirm selection: Press 9.

After the confirmation, the EnterDestination menu appears again. COMANDhas accepted the selected house numberand entered it automatically in the EnterDestination menu.Now you can start the route calculation(Y page 68).

Entering a Junctioni A junction can be entered once you have

entered a street (Y page 65). You can onlyenter those juntions that are stored in thedigital map.

X In the Enter Destination menu selectIntersection.The junction list is displayed with or withoutpredictive speller. The display of thepredictive speller depends on how manyjunctions are available for the selectedstreet.

Junction List with Predictive SpellerIf this list is displayed, the predictive speller3 is activated automatically.

Destination Input 67

Navi

gatio

n

Z

1 List entry that best matches thecharacters already entered

2 List3 Predictive speller

i In the predictive speller 3 you can onlyselect characters that are currentlyavailable. The set of characters that isavailable depends on those already enteredand the data for the digital map.

For the steps ofREntering charactersRDeleting an entryRAccepting first list entryRCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “City list withpredictive speller” (Y page 62).

Junction List Without Predictive Speller

X To select a junction: Press 9or :.

X To cancel selection: Select Back andpress 9.

orX Press the k button.X To confirm selection: Press 9.

After the confirmation, the EnterDestination menu appears again. COMANDhas accepted the selected junction andentered it automatically in the EnterDestination menu.Now you can start the route calculation(Y page 68).

Starting Route Calculationi Route calculation can only be started

once all the necessary address data hasbeen entered.

X In the Enter Destination menu selectStart.

1 Destination2 Starts route calculation and then starts

route guidanceIf route guidance is not active yet, the routecalculation is started.If route guidance is already active, you will beprompted to confirm that route guidanceshould be ended.

68 Destination InputNa

viga

tion

X Select Yes or No.If you select Yes COMAND cancels routeguidance and starts the route calculation tothe newly entered destination.If you select No COMAND resumes theactive route guidance.During the route calculation, an arrowpoints towards the destination, andunderneath the message CalculatingRoute..., for example, is displayed.Route guidance begins after the route hasbeen calculated (Y page 80).

i Route calculation takes some time. Thelength of time depends on, e.g. distance tothe destination. COMAND calculates theroute using the digital map data. Thecalculated route may deviate from theactual road situation, e.g. as a result of roadworks or incomplete map data. Please referto the information on the digital map(Y page 59).

Entering a Destination from theDestination Memory X If necessary switch to navigation mode and

display menu system (Y page 54).X Select Destination£From Memory.

If there are more than 8 entries in thedestination memory, the destinationmemory list with predictive speller isdisplayed, otherwise the destinationmemory list is displayed without predictivespeller (Y page 70).

i There is always an entry in the destinationmemory with the name MyAddress. Youcan assign your home address, forexample, to this entry and select it for routeguidance (Y page 90). This entry is at thetop of the list in the destination memory.

Destination Memory List withPredictive SpellerIf this list is given in the display, the predictivespeller 4 is activated automatically.

1 Character entered by the user2 Characters added by the system3 List entry that best matches the

characters already entered4 Switches to list without speller5 Press and hold deletes complete entry,

press briefly deletes last character6 Currently unavailable characters7 Currently available characters8 Predictive speller9 Currently selected charactera Cancels an entryb Destination memory list

i In the predictive speller 8 you can onlyselect characters that are currentlyavailable. The set of characters that isavailable depends on those already enteredand the content of the destination memory.

When entering characters, the list entry 3always displays a city that best matches thecharacters already entered. COMANDautoatically adds matching letters 3 tothose chracters 2 already entered by theuser.For the steps ofREntering charactersRDeleting an entry

Destination Input 69

Navi

gatio

n

Z

RAccepting first list entryRCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “City list withpredictive speller” (Y page 62).

Switching to the Destination Memory ListWithout Predictive SpellerIf there are several entries in the destinationthat have similar spellings, d ishighlighted.X Press 9.You can switch to the list at any point whileentering characters.X Press 9 repeatedly until the list appears

without the speller.orX Select d and press 9.If COMAND can match the charactersentered definitively to one entry, the listappears automatically without the predictivespeller.

Destination Memory List withoutPredictive Speller

X To select a destination: Press 9or :.

X To cancel selection: Select Back andpress 9.

orX Press the k button.

X To confirm selection: Press 9.X To start route calculation: Select Start.

Entering Destination from the LastDestinations X If necessary switch to navigation mode and

display menu system (Y page 54).X Select Destination£From LastDestinations.

1 Last destination

X To select a destination: Press 9or :.

X To confirm selection: Press 9.X To start route calculation: Select Start.

i For more information on the “LastDestinations” memory go to(Y page 94).

Entering Destination via the Map i In some countries, entering destinations

via the map is not possible at vehiclespeeds above apprx. 3 mph. The functionbecomes available again as soon as thespeed falls below apprx. 2 mph.Using the destination entry via the map,you can also enter a destination that lieswithin the digital map but whose addressdata is not included in the digital map.

70 Destination InputNa

viga

tion

Opening the MapX If at least a city has been entered, selectMap in the Enter Destination menu(Y page 62).

orX If necessary, display the menu system in

the map display .X Select Destination£Using Map.

In both cases, the map together withcrosshairs appears.

1 Current vehicle location2 Crosshairs3 Information on crosshairs position4 Set map scale

i The display 3 depends on the settingsselected in “Information On Map”(Y page 59). It may display the current roadif corresponding data is available in thedigital map. Or it displays the geo-coordinates position of the crosshairs ifGeo-coordinates display is activatedand if there is adequate GPS reception.

Moving the Map and Selecting aDestinationX To move the map: Press9, :, ; or =.

X To set the map scale: Press U orT.The map scale is displayed.

X To select a destination: Press 9 once orrepeatedly until you get a list ofdestinations if available.

X To select a destination: Press : or9.

X Press 9.If the destination is within the digital map,COMAND tries to find the destination onthe map.If the destination can be found, the EnterDestination menu is displayed with theaddress of the destination. Otherwise youwill see the entry Destination FromMap.

X To start route calculation: Select Start.

Entering Stopover Destination i When route guidance is activate, you can

enter a stopover destination. Stopoverdestinations may be predefineddestinations in the following categoriessuggested by COMAND for you to select:

Destination Input 71

Navi

gatio

n

Z

RATM/CashRHospitalRGas StationRParking LotRRestaurant

However, you can also enter destinationsother than those that have beenpredefined. Select the menu item Other forthis purpose.You can influence the route guidance to themain destination in a specific way using thestopover function. Once the stopoverdestination has been reached, COMANDautomatically recalculates the route to themain destination.

Entering Predefined DestinationsX If necessary switch to navigation mode and

display menu system .X Select Destination£Stopover.

No Stopover Destination available yetX Select a category.

A Stopover Destination existsX To change: Select Change Stopover.X Select a category.X Select another stopover destination.

Selecting a Predefined CategoryCOMAND first searches for destinationsalong the route within the selected category.COMAND then searches for destinations inthe vicinity of the vehicle's location.If COMAND is unable to find any destination,a message to that effect will be displayed.X Select OK.X If necessary, select another category.

If COMAND finds destinations, a list isdisplayed in the right-hand part of thescreen. Here you will find the stopoverdestinations in the selected category,

sorted by distance from the current vehiclelocation.

The list showsRNameRInformation on the location of the stopover

destination in relation to the direction oftravel and theRCurrent distance to the stopover

destination.X To choose a destination: Press 9

or :.X To select a destination: Press 9.

The Enter Destination menu appears anddisplays the address of the destination.

X To cancel a selection: Select Back.X To start route calculation: Select Start.

Entering Another Destination asStopover DestinationX If necessary, switch to navigation mode

and display menu system (Y page 54).X Select Destination£Stopover.X To enter: Select OTHER.

Choose from:RAddress EntryRFrom MemoryRFrom Last DestinationRFrom POIs

X Select a menu item.The rest of the destination entry will varydepending on the selection made:For the Address Entry option see:Entering a destination via address(Y page 61).For the From Memory option see:Entering a destination from the destinationmemory (Y page 69).For the From Last Destination option see:Entering a destination from the lastdestinations (Y page 70).For the From POIs option see:

72 Destination InputNa

viga

tion

Entering a POI (Y page 73).X To start route calculation: Select Start.

Deleting Stopover DestinationAn existing stopover destination can bedeleted.X Switch to navigation mode if necessary.X Select Destination£Stopover£Delete Stopover.COMAND deletes the stopover destinationand recalculates the route to the maindestination.

POI Input

Entering a POI in Local Area ofDestination

i It is only possible to enter a POI in thelocal area of the destination when routeguidance is active.

X In the map display with the menu systemdisplayed, select Destination£ FromPOIs£Near Destination.

X Continue by selecting the POI category(Y page 74).

Entering a POI in the Vicinity of theLocation X In the map display with the menu system

displayed, select Destination£FromPOIs£Current Position.

X Continue by selecting the POI category(Y page 74).

Entering a POI in the Vicinity of aSpecific Location

Option 1X In the map display with the menu system

displayed, select Destination£FromPOIs£Other City.

X If necessary proceed as described under“Selecting a State/Province” (Y page 62).

X To enter a city: Select City.The city input menu appears.

X Proceed as described in the “Entering aCity” section

X After entering the city, continue byselecting the POI category (Y page 74).

Option 2X Enter an address in the Enter Destination

menu .X Select POI.X Continue by selecting the POI category

(Y page 74).

Entering POIs via Name Search i This function gives you access to all POIs

that are available in the digital map.

X In the map display with the menu systemdisplayed (Y page 54), select Destination£From POIs£Search By Name.This displays a list of all POIs in the digitalmap and the predictive speller.

X Continue as described in the “POI List withPredictive Speller” section (Y page 77).

Entering a POI via Phone NumberSearch

i This function gives you access to all POIsin the digital map stored with a phonenumber.

POI Input 73

Navi

gatio

n

Z

X In the map display with the menu systemdisplayed (Y page 54), select Destination£From POIs £Search By PhoneNumber.This displays a list of all POIs in the digitalmap sorted by phone number and thepredictive speller.

X Continue as described in the “POI List withPredictive Speller” section (Y page 77).

Choosing a POI Category The categories and POIs available depend onthe area for which you wish to enter set forthe POI.RPOI in local area of destination:

Alphabetically sorted categories and POIssorted by distance in the vicinity of thedestination location are available.RPOI in the vicinity of the location:

Alphabetically sorted categories and POIssorted by distance in the vicinity of thevehicle location are available.RPOI in a particular city:

If you have only entered the country and thecity, alphabetically sorted categories andalphabetically sorted POIs within the citylimits are available.If you have entered more than the countryand the city, alphabetically sortedcategories and POIs sorted by distance inthe vicinity of the address entered areavailable.RPOI via name search:

An alphabetically sorted list of all POIs isavailable.RPOIs via phone number:

A numerically sorted list is available.

Selecting a CategoryDepending on the number of availablecategories, the main category list is displayed

either with or without predictive speller(Y page 75).

Main Category List with Predictive SpellerIf this list is given in the display, the predictivespeller 7 is activated automatically.

1 Symbol for main category2 Characters entered by the user3 Characters automatically added by the

system4 List entry that best matches the

characters already entered5 Main category list6 Currently unavailable characters7 Predicitve speller8 Currently selected character9 Currently available characters

i In the predicitve speller 7, you can onlyselect characters that are currentlyavailable. The set of characters that isavailable depends on those already enteredand the data for the digital map.

When entering characters, the list entry 4always displays a category that best matchesthe characters already entered. COMANDautomatically adds matching letters 3 tothose characters 2 already entered by theuser.

74 POI InputNa

viga

tion

Entering charactersX To select characters: Press ; or=.

X To switch between the lines: Press9 or :.

X To confirm character selection:Press 9.

Deleting an EntryX To delete individual characters: Selectõ in the bottom line and press 9.

orX Press the 2 button.X To delete an entire entry: Select õ in

the bottom line and press 9 until theentire entry is deleted.

orX Press and hold the 2 button until the

entire entry has been deleted.

Canceling an EntryX Select Back in the bottom line and press9.

orX Press the k button.

The previous menu appears.

Accepting First List EntryX Press and hold 9 until the list appears

without speller.orif COMAND can match the charactersentered to one entry, the list appearsautomatically without the speller.

Switching to the Main Category ListWithout Predictive SpellerYou can switch to the list at any point whileentering characters.X SPress 9 repeatedly until the list

appears without the speller.orX Select d and press 9.

Main Category List Without PredictiveSpeller

Example: Main category list for POIs in the vicinityof the location1 Selected main category

X To select a main category: Press 9or :.

X To cancel selection: Press the kbutton.

X To confirm selection: Press 9.

1 Calls up all entries in the RESTAURANTmain category

2 Calls up all entries in the BREWPPUBsubcategory

3 Predictive speller

i In the predictive speller 3 you can onlyselect characters that are currentlyavailable. The characters that are availabledepends on those already entered and thedata for the digital map.

For the steps of

POI Input 75

Navi

gatio

n

Z

REntering charactersRDeleting an entryRAccepting first list entryRCanceling an entryRSwitching to the list without predictive

spellerproceed as described under “Main categorylist with predictive speller” (Y page 74).Wth the POI list displayed:X To select a subcategory: Press 9

or :.X To cancel selection: Press the k

button.X To confirm selection: Press 9.

After selecting a subcategory you will seethe list of POIs. This contains the availablePOIs for the subcategory that are locatedin the search radius.

i If ALL TYPES is selected in the list, thePOI list contains all the POIs in allsubcategories of the RESTAURANT maincategory that are located in the searchradius. The list item OTHER at the end of thelist contains all the POIs not assigned to anysubcategory in the RESTAURANT maincategory that are located in the searchradius.

The selected main category contains nosubcategories:Selecting it immediately opens the POI list.The POI list then contains the available POIsfor the main category that are located in thesearch radius.

POI listAs an example, the illustration below showsthe POI list for the main category ofRESTAURANT, subcategory BREWPUB, in thevicinity of the location.

1 Direction of destination2 Air-line distance to the destination3 Point of interest4 Selected category or subcategory

i Depending on the POI category selected,COMAND uses different reference pointswhen determining the distance to thedestination:RIn the vicinity of the location:

The distance to the POI from the currentvehicle location.RLocal area of destination:

The distance to the POI from thedestination entered.ROther area:

The distance to the POI in the selectedcity from the current vehicle location.

Selecting a POIX Select the desired POI.

The full address of the selected POI isdisplayed.

i If the selected POI has a telephone bookentry, you can make a call to the POI.

76 POI InputNa

viga

tion

1 POI with address2 Starts route calculation3 Saves POI as destination4 Shows details of the address5 Initiates a call, if available6 Cancels selection7 Displays the map

X To cancel selection: Press the kbutton.

orX Select Back

The POI list appears.X To start route calculation: Select Start.

POI list with predictive spellerIf you have selected Entering a POI via aName Search (Y page 73), the list of allavailable POIs in the digital map is displayed.

1 First list entry after opening the list2 POI list3 Predictive speller4 Category symbols

i In the predictive speller 3 you can onlyselect characters that are currentlyavailable. The set of characters that isavailable depends on those already enteredand the data for the digital map.

For the steps ofREntering charactersRDeleting an entryRAccepting first list entryRCanceling an entryproceed as described under “Main categorylist with predictive speller” (Y page 74).

Selecting a POITo accept first list entry:X Press and hold 9 until the list appears

without speller.orIf COMAND can match the charactersentered definitively to one entry, the addressentry appears automatically (Y page 76).You can display the full address of a POI atany point while entering characters.X Press 9 repeatedly until the list appears

without the speller.orX Select ? and press 9.

The full address of the POI is displayed.X To cancel selection: Press the k

button.orX Select Back.

The POI list appears.X To start route calculation: Select Start.

ZAGAT®Rating ServiceEntries with the Z symbol contain additionalZAGAT information. ZAGAT is a service thatevaluates restaurants, for example, indifferent categories like food, decor, serviceetc., supplies the average price level (cost)and a general description.

POI Input 77

Navi

gatio

n

Z

After you have selected the entry with the Zsymbol the next display includes the Zagatratings.

1 ZAGAT Ratings2 Display details

X To see description: Select Details.

ZAGAT example description

Entering a POI via the Map i If the crosshairs are visible on the map,

you can enter POIs in the vicinity of thecrosshairs. If the crosshairs are not visible,you can enter POIs in the vicinity of thecurrent vehicle location.

X In the map display with the menu systemdisplayed (Y page 54) select Guide.POIs are available:Depending on the map scale selected, POIsymbols are displayed on the map. Thescale starting at which symbols aredisplayed on the map varies from symbolto symbol.You can select which symbols COMANDshould display (Y page 56). The POI nearestto the center of the screen is selectedautomatically.No POIs available:A corresponding message is displayed.

i This message is also displayed if the menuitem No Symbols under Map Display hasbeen selected (Y page 56).

X To confirm message: Press 9.

1 Information about the highlighted POI2 Highlighted POI

78 POI InputNa

viga

tion

X To select a POI: Select Next orPrevious.

X To start route calculation: Select Start,see also (Y page 68).You will be asked whether the POI shouldbe adopted as the destination.

X Select Yes or No.Route calculation starts if Yes is selected;a new POI can be chosen if No is selected.

POI Input 79

Navi

gatio

n

Z

Route Guidance

General Notes

G WarningCOMAND calculates the route to thedestination without taking into account thefollowing, for example:RTraffic lightsRStop and right-of-way signsRLane mergingRParking or stopping prohibited areasROther road and traffic rules and regulationsRNarrow bridges

COMAND may give incorrect navigationcommands if the data in the digital map doesnot correspond with the actual road/ trafficsituation. For example, if the traffic routinghas been changed or the direction of a one-way road has been reversed.For this reason, you must always observeapplicable road and traffic rules andregulations during your journey. Road andtraffic rules and regulations always havepriority over the navigation commandsgenerated by the system.

COMAND guides you to the destination bymeans of driving recommendations in theform of navigation announcements or routeguidance displays.

i The route guidance displays only appearif the display has been switched tonavigation mode.

If, for some reason, you do not follow thenavigation announcements or if you leave thecalculated route, COMAND automaticallycalculates a new route to the destination.If the map data contains correspondinginformation during route guidance, COMANDtries to avoid roads with limited passability,e.g. roads that are blocked for through-trafficand are for residents only.Time restrictions of roads (e.g. blocked onSundays and public holidays) are only taken

into account for route guidance if the digitalmap contains corresponding informationduring the blocked time periods.

Driving Maneuver Driving maneuvers are given in three phases:RPreparation phaseRAnnouncement phaseRManeuver phase

Preparation PhaseCOMAND prepares you for the next drivingmaneuver. Based on the example displayshown below, the announcement is madeusing Prepare to turn right. The displayis not split and displays the map over theentire width.

1 Point at which the driving maneuver takesplace (light-blue dot)

2 Next road to be taken3 Current vehicle location, the tip of the

triangle points in the vehicle’s direction oftravel

4 Road currently being driven down

80 Route GuidanceNa

viga

tion

i Depending on the basic setting selectionin "Information on map" you will see in 4RInformation on "Arrival time/distance”RRoad currently being driven downRGeo-coordinate display.If you have selected the None menu item,the display is hidden.

Announcement PhaseCOMAND announces the imminent drivingmaneuver. Based on the example displayshown below, the announcement is made900 ft. ahead of the driving maneuver usingPlease turn right in 900 ft. andfollow the ’road name’.

i The announced distance to the maneuverdepends on the class of road and its speedlimit.

The display is now split into two sectors. Inthe left half, you see the normal map view.The right side shows an enlarged section ofthe area around the junction (Crossing Zoom)or a 3D image of the road's course with theroute indicating the next maneuver.The example illustrated below shows thejunction zoom in the right-hand half.

1 Next road to be taken2 Point at which the driving maneuver takes

place (light-blue dot, shown in the left-hand and the right-hand display)

3 Visual distance indicator to the drivingmaneuver

4 Driving maneuver (turn right here)

5 Distance information to the drivingmaneuver

6 Route (highlighted in blue, shown in theleft-hand and right-hand display)

i The solid part of the visual distanceindicator 3 reduces from bottom to top asthe announced driving maneuver getscloser.

Maneuver PhaseCOMAND announces the imminent change ofdriving maneuver. Based on the exampledisplay below, the announcment is made 90ft. ahead of the driving maneuver using Nowturn right. The display is split into twohalves, as in the announcement phase.

1 Current vehicle location, tip of the trianglepoints in the vehicle’s direction of travel

2 Visual distance indicator to the nextdriving maneuver

3 Distance information to the drivingmaneuver

Once the driving maneuver is complete,COMAND will automatically switch back tofull-screen display.

Route Guidance 81

Navi

gatio

n

Z

Example Display without DrivingManeuver

1 Route (highlighted in blue)2 Current vehicle location3 Road currently being driven down4 Set map orientation, for explanation and

setting see5 Set map scale, for explanation and setting

see

i The map may display other symbols, e.g.the destination < or the stopoverdestination = (if a stopover destinationhas been entered).

Traffic Lane Recommendations On multi-lane roads, COMAND may displaytraffic lane recommendations for imminentdriving maneuvers. For this there must becorresponding data available on the digitalmap.With respect to the next two drivingmaneuvers, COMAND displays the traffic lanerecommendations 6, 7 and 8.

1 Point of the next driving maneuver2 Point of the second driving maneuver.3 Next driving maneuver, exit on right here4 Visual distance indicator to the next

driving maneuver5 Distance information to the next driving

maneuver6 Recommended lane7 Possible lane8 Lane not recommended9 Current vehicle location, tip of the triangle

points in the vehicle’s direction of travel

Explanation of the Traffic LaneRecommendationsRRecommended lane 6:

From this lane it is possible to carry out thenext two driving maneuvers withoutchanging lanes.RPossible lane 7:

From this lane it is only possible to carryout the next driving maneuver withoutchanging lanes.RLane not recommended 8:

From this lane it is not possible to carry outthe next driving maneuver withoutchanging lanes.

Depiction of the Traffic LaneRecommendationsThe color depiction of the traffic lanerecommendations differs depending on

82 Route GuidanceNa

viga

tion

whether the display is set to day or nightdesign.

Lane Daydesign

Nightdesign

Recommended lane6

Darkblue

Lightblue

Possible lane7

Lightblue

Darkblue

Lane notrecommended8

Grey Grey

Destination or Destination RegionReached

Once you have reached your destination, acheckered flag is displayed and routeguidance is ended automatically.For certain special destinations (airports orhighway intersections), you will see the Areaof dest. reached message in addition tothe checkered flag.

Off-road and Off-map

G WarningThe COMAND navigation system may directyou to off-road routes that your vehicle maynot be capable of traversing through withoutdamaging your tires, wheels or vehicle. It isthe driver’s sole responsibility to determinethe suitability of the route. Off-road routesmay be of varying conditions and theirappropriateness for use may be affected byvarious factors such as time of day, time ofyear and immediate weather conditions thatcannot be judged or taken into considerationby the COMAND system.

Route Guidance to an Off-roadDestinationCOMAND can also guide you to destinationsthat are within the area covered by the digital

map, but are not themselves included on themap. Such destinations are off-roaddestinations, which you can enter, forexample, by entering the destination via themap.In this case, COMAND guides you on roadsknown to the system for as long as possibleusing navigation announcements and routeguidance displays.

1 Off-road destination2 Off-road route segment (dashed line)3 Current vehicle location, tip of the triangle

points in the vehicle’s direction of travel4 Off-road, no road name availableJust before reaching the last known point onthe map, the message You will enter anarea with unreliable map data in xxmiles is announced.When the vehicle is entering the area that isnot covered by the digital map, the screen issplit. On the right half of the screen an arrowappears that points to the off-roaddestination 1 and the system announces:Please follow the arrow on thedisplay. When the vehicle comes close tothe destination the message Destinationregion reached is given.

Route Guidance from an Off-roadLocation to a DestinationIf the vehicle location is within the areacovered by the digital map, but the map itselfdoes not contain any information on thelocation, the vehicle is in an off-road position.

Route Guidance 83

Navi

gatio

n

Z

COMAND can guide you from such a positionto a destination.At the start of route guidance you will see themessage Off Mapped Road, an arrow andthe distance to the destination. The arrowindicates the direction of the actualdestination.The blue marking for the route on the mapstarts from the nearest road known to thesystem.As soon as the vehicle is travelling again on aroad known to the system, route guidancecontinues in the usual manner.

Route Guidance from an Off-mapLocation to a DestinationIf the vehicle location is outside the areacovered by the digital map, then the vehicleis in an off-map position. COMAND can guideyou from such a position to a destination.At the start of route guidance you will see themessage Off Map, an arrow and the distanceto the destination. The arrow indicates thedirection of the actual destination.The blue marking for the route on the mapstarts from the nearest road known to thesystem.As soon as the vehicle is travelling again on aroad known to the system, route guidancecontinues in the usual manner.

Off-road During Route GuidanceThe actual path of the road may deviate fromthe data in the digital map due to road works.In cases like this, the system is temporarilynot able to locate the vehicle location on thedigital map; the vehicle is thus in an off-roadposition.The display then shows the message OffMapped Road, an arrow and the distance tothe destination. The arrow indicates thedirection of the actual destination.

As soon as the vehicle location is found again,route guidance continues in the usualmanner.

Navigation Announcements

G WarningNavigation announcements are intended todirect you while driving without diverting yourattention from the road and driving.Please always use this feature instead ofconsulting the map display for directions.Consulting the symbols or map display fordirections may cause you to divert yourattention from driving and increase your riskof an accident.

i During an active telephone call, thenavigation announcements aresuppressed.

If you have missed an announcement, you cancall up the current announcement at anytime.X To request current announcement:

select Navi £ 6.orX In map view with the menu system

displayed, select 6.

X To switch off navigationannouncements: During theannouncement, press and hold the ,button.You will briefly see the message: Thedriving instructions have beenmuted.

X To switch navigation announcementsback on manually: Select Navi£6.

orX Select 6 in map view with the menu

system displayed.orX Start a new route calculation .

84 Route GuidanceNa

viga

tion

orX If COMAND is switched on again or the

engine is restarted.X To set the volume of the

announcements: Set the volume duringthe automatic announcement .

orX Call up an announcement manually usingNavi£6 and adjust the volume.

Canceling Route Guidance X In the map display with the menu system

displayed select Destination£CancelRoute Guidance.

Resuming Route GuidanceX Select Destination£Continue RouteGuidance in map view with the menusystem displayed.COMAND calculates the route.

Detour Function i The Detour function blocks a route

segment ahead. You can set the length ofthe block. COMAND calculates a detourroute if possible.

X Select Route£Detour in map view withthe menu system displayed .

X To set the length of block: SelectLonger or Shorter repeatedly until therequired length is set.The blocked segment is highlighted in red/white on the map. Shown at the top of thedisplay is the length of the blockedsegment and the route segment to whichthe block goes.

X To cancel the function: Select Back.

X To start route calculation: Select Start,see also .

X To change a block: Select Navi£Route£Detour£Change.

i If a block already exists, the messageDetour Already Set is displayed. Youcan then change or delete this.

X Then set length of block.X To delete block: Select Navi£Route£Detour£Delete.

i If a block already exists, the messageDetour Already Set is displayed. Youcan then change or delete this.

Alternative Route i You can have other routes calculated for

the original route guidance using theAlternative Route function.

X In the map display with the menu systemdisplayed select Route£AlternativeRoute.The display is split into two halves. On theleft is the map, which displays one or morealternative routes between the start andthe destination. The current route ishighlighted in dark blue, other alternativeroutes are light blue.The right side of the display showsinformation on the active alternative route,e.g. length of the segment and theestimated time of arrival.

X To select next or previous alternativeroute: Select Next or Previous.The selected route is now highlighted indark blue.

X To return to the original route guidance:Select Back.

X To start route guidance with theselected alternative route guidance:Select Start.

Route Guidance 85

Navi

gatio

n

Z

Route Browser i The route browser provides an overview

of the route. You can move along the routesegment by segment using the routebrowser and view information and detailsabout the route segments.

X In the map display with the menu systemdisplayed, select Route£RouteBrowser.The route browser is in the display.The top of the display shows information onthe highlighted route segment, e.g. theroad and the segment of the road to bedriven.The highlighted route segment is identifiedon the map by its white color and red edge.

X To display next or previous routesegment: Select Next or Previous.

X To enlarge or reduce the map display:Select ; or :.

X To close route browser: Select Back.

Displaying Destination Information X In the map display with the menu system

shown, select Route£DestinationInformation.The destination information is given in thedisplay.

Example display with main destination andstopover destination1 Distance/estimated time of arrival/

estimated journey time to the stopoverdestination

2 Stopover destination =3 State and City4 Main destination <5 Distance/estimated time of arrival/

estimated journey time to the maindestination

i When calculating the estimated time ofarrival, COMAND uses the time set on theCOMAND as its basis. For this reason, thetime on COMAND must be set correctly .The calculation of the estimated time ofarrival does not specifically take intoconsideration whether it is summer time orstandard time at the destination. It is nottaken into consideration whether or not thedestination is in a different time zone. Thedistance to the destination, the estimatedtime of arrival and the estimated remainingjourney time 1, 5 are not displayed untilthe route calculation is complete.

X To close the destination information:Press ; or =.

orX Press the k button.

86 Route GuidanceNa

viga

tion

Traffic Messages

i Optional satellite radio equipment and asubscription to a satellite radio serviceprovider are required for the satellite radioreception referred to here. You can findmore information on SatRadio in chapter“Satellite Radio” (Y page 125).

COMAND can receive and incorporate trafficmessages via satellite radio into thenavigation system. Traffic report messagesand map symbols can then be viewed in theCOMAND display.

Real-Time Traffic Notifications in theMap

COMAND can display certain traffic events inthe map. The notifications are shown in themap scale range from 0.05 mi to 20 mi.

X Press U or T until the required mapscale is set.

1 Marker symbols for the affected routesection

2 Symbol for event on the route3 Current vehicle position and direction of

travel4 Marker symbols for the extension of the

affected route section5 Map scale

Real-Time Traffic Notification Symbols

Symbol Description Traffic Notifications in Map Display TrafficReportLists

TrafficReportMessage

Warning(red)

(Not possible) Appearswithwarningentry type

Appearswithwarningentry type

Incident(yellow)

(Not possible) Appearswithincidententry type

Appearswithincidententry type

Traffic jamon route(stop and go)

Appears at the beginning of trafficcongestion from the driver's point ofview if route guidance is active androute goes through congested area.Yellow car symbols could appear incombination with this symbol.

Appearswith trafficjam onroute (stopand go)entry type

Appearswithtraffic jamon route(stop andgo) entrytype

Traffic Messages 87

Navi

gatio

n

Z

Symbol Description Traffic Notifications in Map Display TrafficReportLists

TrafficReportMessage

Traffic jamon route

Appears at the beginning of trafficcongestion from the driver's point ofview if route guidance is active androute goes through congested area.Red car symbols could appear incombination with this symbol.

Appearswith Trafficjam onroute entrytype

AppearswithTrafficjam onrouteentry type

Blockedsection onroute

Appears at the beginning of a blockedarea from the driver's point of view ifroute guidance is active and routegoes through blocked area.XX XX symbols could appear incombination with this symbol.

AppearswithBlockedsectionentry type

AppearswithBlockedsectionentry type

Traffic jam(stop and go)(yellow car)

Traffic congestion, average speed25 – 45 mph.Could appear repeatedly to indicatelength of traffic congestion.

(Notpossible)

(Notpossible)

Traffic jam(red car)

Traffic congestion, average speed5 – 20 mph.Could appear repeatedly to indicatelength of traffic congestion.

(Notpossible)

(Notpossible)

XXXX Blockedsection

Road impassable.Could appear repeatedly to indicatelength of blocked area

(Notpossible)

(Notpossible)

Displaying Real-Time Traffic ReportsX If necessary, switch to navigation mode

and show the menu system (Y page 54).X Select Traffic.COMAND searches for SatRadio channelssending traffic messages. You will see adialogue box displaying the message NoTraffic Messages.This either means:RMessages were not yet receivedRthere are no messages availableX To cancel the search: Select Cancel.X To close the message: Select OK

If there are traffic reports, you will see a list.The content of the list varies depending onwhether route guidance is active or not.

List When Route Guidance is not ActiveThe list shows all the roads, areas or regionsfor which messages are available.

88 Traffic MessagesNa

viga

tion

1 Icon for warning message2 Country designation3 Road concerned

i A traffic message may also concern anarea or region rather than a road, e.g.impaired visibility due to fog.

X To read a traffic report: Select a road, anarea or region.

List When Route Guidance is ActiveThe list first shows roads, areas or regions onthe route for which there are traffic reports.

1 To display all traffic messages (includingthose not concerning the route)

2 To have traffic reports read aloud, see theread-aloud function (Y page 90)

3 Affected roads, areas or regions (onlyavailable when there are traffic messagesfor the route)

X To display all messages: Select DisplayAll Messages.You will see a list of all roads, areas orregions for which reports are available,including those that do not affect the route.

X To display a traffic message: Select aroad, area or region from the list.

X To close the list: Press the ; or =button once or repeatedly.

Example of a Traffic Message

1 Depending on your selection: Messageson the Route or All Messages

2 Icon for message type, e.g. warningmessage

3 Country designation4 Road, area or region for which there is a

message5 Text of message6 Message 1 of 1 for the road affected

Traffic Messages 89

Navi

gatio

n

Z

X To scroll within the message or to thenext message: SPress 9 or :.

X To return to the message list:Press ; or =.

Read-aloud Function The read-aloud function is only availablewhen route guidance is active. It can read outtraffic reports relating to the route. You canset the language (Y page 40) and the read-aloud speed (Y page 41).X If necessary, switch to navigation mode

and show the menu system (Y page 54).X Select Traffic£Read aloud AllMessages on Route.

COMAND reads out the messages insequence.

i The Messages on the Route menu itemhas no function if there are no messagesrelating to the route.

X To cancel read-out of current message:Select Cancel Read-aloud Function.

orX Press the x button.COMAND reads the current message aloudand then ends the read-aloud function.

Destination Memory

Home Address i The destination memory always contains

an entry named My address which is at thetop of the list. You may wish to assign yourhome address to this entry, for example. Ifthe My address (¤ icon) entry alreadycontains data that can be used fornavigation, you can select it for routeguidance.

Assigning Home Address for First Timeor ChangingX If necessary, switch to navigation mode

and display the menu system (Y page 54).X Select Destination£From Memory.

If there are more than 8 entries in thedestination memory, the destinationmemory list with predictive speller isdisplayed, otherwise the destinationmemory list is displayed without predictivespeller (Y page 69).If the list appears without the inputcharacters, the entry My address ishighlighted automatically.

Switching to the Destination Memory ListWithout Predictive SpellerX Press 9 repeatedly until the smart

speller disappears.The entry My Address is highlightedautomatically unless you have entered acharacter using the predictive speller.

If characters have been entered using thepredictive speller:X Press 9 in the list until the MyAddress entry is highlighted.

orX To assign an address for the first time:

Press and hold 9 until the spellerdisappears.The entry My Address is highlightedautomatically in the list.

90 Destination MemoryNa

viga

tion

X To exit the menu: Select Back.Subsequent operation depends on whetheryou enter the address or wish to use anaddress book entry that can be used fornavigation as My address.

Entering or Changing Your AddressX If necessary, change to the destination list

without speller.X To enter the address for the first time:

Press 9 and select New Entry.

X To change the address: Select Options£ New Entry.In both cases, the address input menuappears.

X Enter the address. Proceed in the same wayas you would enter a destination asdescribed in the "Entering a destination byaddress" section (Y page 61).

X Select Save after you have entered theaddress.COMAND then stores the entry. You willsee a message and then the address menuwith the selected address. Start ishighlighted automatically.

Using an Address Book Entry as HomeAddressX If necessary, change to the destination list

without speller (Y page 90).X To assign an address for the first time:

Press 9 and select Assign AddressBook Entry.

X Select Home or Work.X To change home address: SelectOptions£ Assign to Address BookEntry.

X Select Home or Work.X In both cases you will see either a list or,

with more than 8 address book entries, thesearch menu with smart speller.

X Select the desired address book entry.Proceed as described in the "Searching for

an address book entry" section(Y page 111).

i Information on how to link address bookentries with navigation data can be foundin "Assigning a destination to an addressbook entry" (Y page 93).

X To confirm your selection: Press 9.An address is assigned for the first time:COMAND then stores the entry. You willsee a message and then the address menuwith the selected address. Start ishighlighted automatically.The address is changed:A prompt appears, asking if you really wishto overwrite My Address.

X Select Yes or No.If you select Yes, COMAND overwrites thedestination. You will see a message andthen the address menu with the selectedaddress. Start is highlightedautomatically.If you select No, the list will reappear.

Selecting Home Address for RouteGuidancei If the My Address (¤ icon) entry already

contains data that can be used fornavigation, you can select it for routeguidance. If not, then first assign adestination to this entry (Y page 90).

X If necessary, switch to navigation modeand display the menu system (Y page 54).

X Select Destination£From Memory.If more than 8 entries are listed in thedestination memory, the destination listappears with input characters, otherwisethe destination list appears without thesmart speller.

Destination Memory 91

Navi

gatio

n

Z

X Destination memory with smart speller:Press 9 repeatedly until the list appearswithout the smart speller.

orX Select d at the bottom right in the smart

speller.X Destination memory list without input

characters: Press 9

1 Start route calculation to your addressYou will see the address entry menu with theaddress data for your own address. Start ishighlighted automatically.

Starting Route CalculationX Press 9.

Once the route has been calculated, routeguidance begins (Y page 80).

Storing a Destination in theDestination Memory

i This function also stores the destinationin the address book. COMAND creates anaddress book entry that contains thecomplete, navigable address data. You canthen select this entry in the address bookand start route guidance to the addressfrom there.

After the Address Has Been EnteredX Select Save after you have entered the

address in the address input menu.You can now select storage options.

During Route GuidanceX If necessary, show the menu system

(Y page 54).X Select Destination£SaveDestination.You can now select storage options.

Accepting from the Last DestinationsX Show the menu system, if necessary

(Y page 54).X Select Destination£From LastDestinations.The list of previous destinations appears.

X To select a destination: Press 9or :.

X To confirm the destination: Press 9.The address of the destination is displayed.

X Select Save.orX Select a destination and then selectOptions £ Save.In both cases, you can then select memoryoptions.

Selecting Memory Options

Saving Destination Without NameX Select Save Without Name.

COMAND stores the destination in thedestination memory and uses the addressas the destination name.

orX Select Save as My Address.

COMAND stores the destination in thedestination memory as My Address.

92 Destination MemoryNa

viga

tion

If the selected address book entry alreadycontains address data that can be used fornavigation (¤ icon), a prompt will appearasking whether you wish to overwrite theexisting data.

X Select Yes or No.After selecting Yes, the SavingProcedure Successful messageappears; selecting No cancels theprocedure.

Saving Destination With NameX Select Save With Name.X Select the category desired, e.g. Home.

The input menu containing data fields andinput characters appears.

1 Selected data field with cursor2 Predictive speller

X To enter data: Continue with the step"Changing Data Field" in the "Creating aNew Address Book Entry" section(Y page 110).COMAND stores the destination under thename entered.

Assigning Destination to an Address BookEntryi This function assigns the complete,

navigable address data to an existingaddress book entry. You can then selectthis entry in the address book and startroute guidance to the address from there.

X Select Assign to Address Book Entry.

X Select the desired category, e.g. Home.In both cases you will see either a list or,with more than 8 address book entries, thesearch menu with smart speller.

X Select the desired address book entry.Proceed as described in the "Searching foran Address Book Entry" section(Y page 111).COMAND stores the data if the addressbook entry selected does not yet containnavigable address data.If the selected address book entry alreadycontains address data that supportnavigation, you will be prompted to confirmthat you wish to overwrite the existing data.

X Select Yes or No.If you select Yes, COMAND saves the data.

Deleting Destination Home AddressEntry from the Destination Memory X If necessary, switch to navigation mode

and display the menu system (Y page 54).X Select Destination£From Memory.

If more than 8 entries are listed in thedestination memory, the destination listappears with input characters, otherwisethe destination list appears withoutpredictive speller.

X Select the destination you are looking for.Proceed as described in the "Entering aDestination from the Destination Memory"section (Y page 69).

X Select Options£Delete.A prompt appears asking whether you wishto delete the destination.

X Select Yes or No.If you select Yes, COMAND deletes thedestination. You see a correspondingmessage.

i If the address data, which supportnavigation, for the destination to be deletedhas also been assigned to an address book

Destination Memory 93

Navi

gatio

n

Z

entry, COMAND deletes this data there,too. If the corresponding address bookentry does not contain any other data, e.g.phone numbers, COMAND deletes theentire address book entry.

Last Destinations

i COMAND automatically saves the lastdestinations used for the last routecalculation. If the memory is full, COMANDdeletes the oldest destination. You can alsosave a destination from the lastdestinations to the destination memory.Here it is saved permanently.

Saving a Destination Permanently inthe Destination MemoryX Proceed as described in the “Accepting

from the Last Destinations” section(Y page 92).

Saving the Vehicle Position in the Listof Last Destinations X If necessary, switch to navigation mode

and display the menu system (Y page 54).X Select Position£Save VehiclePosition.COMAND saves the current vehicleposition as a destination in the list of lastdestinations.

Saving the Crosshair Position in theList of Last Destinations

i A crosshair appears on the map if youhave moved the map manually. You canstore the crosshair position as adestination in the list of last destinations.

X If necessary, display the menu system:Press 9.

X Select Position£Save CrosshairPosition.

Or, if route guidance is active:X If necessary, display the menu system:

Press 9.X Position£Destination PositionMapYou will see the map with a crosshair at thedestination.

X To display the menu system: Press 9.

X Select Position£Save CrosshairPosition.COMAND saves the crosshair position as adestination in the list of last destinations.

Deleting One of the Last Destinations

X If necessary, switch to navigation modeand display the menu system (Y page 54).

X Select Destination£From LastDestinations.The list of last destinations appears.

X Select the desired destination.X Select Options£Delete.

A query appears.X Select Yes or No.

If you select Yes, COMAND deletes thedestination. You see a correspondingmessage.

94 Last DestinationsNa

viga

tion

Safety Precautions .............................. 96General Information ............................ 96Activating the Mobile Phone .............. 97Submenu Overview .......................... 100COMAND Phone Book ....................... 101Call Lists ............................................ 104Making Calls ...................................... 107Address Book .................................... 109

95

Tele

phon

e

Safety Precautions

G WarningSome jurisdictions prohibit the driver fromusing a cellular telephone while driving.Whether or not prohibited by law, for safetyreasons, the driver should not use the cellulartelephone while the vehicle is in motion. Stopthe vehicle in a safe location before placing oranswering a call.If you nonetheless choose to use the mobilephone while driving, please use the handsfreefeature and be sure to pay attention to thetraffic situation at all times. Use the mobilephone only when road, weather and trafficconditions permit. Otherwise, you may not beable to observe traffic conditions and couldendanger yourself and others.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.

G WarningYou and others may damage your health dueto excessive electromagnetic radiation. Byusing an external antenna, the possible healthrisks of electromagnetic fields, which areunder discussion among the scientificcommunity, should be largely prevented.

General Information

Vehicle Equipmenti This Operator’s Manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Making Calls via Bluetooth®Interface

The telephone function via the Bluetooth®

interface is available in conjunction with aBluetooth-enabled mobile phone.With a suitable mobile phone, you can useCOMAND’s hands-free feature to downloadelectronic business cards (vCards) via theBluetooth® interface. Further information onsuitable mobile phones and connectingBluetooth-enabled mobile phones toCOMAND is available via the Internet atwww.mbusa-mobile.com.

Interruptions to the Connection WhileDriving

Interruptions to the connection may occur ifRthere is inadequate GSM network coverage

in certain regionsRyou are switching from one GSM

transmitting/receiving station (GSM cell)to another and there is no voice channelavailable in this cellRyou are using a SIM card that is not

compatible with the available networkRwhen using a mobile phone with

“Twincard”, the mobile phone issimultaneously logged into the networkwith the second SIM card.

Operating Options If the mobile phone is connected withCOMAND via the Bluetooth® interface, youcan operate the phone using the followingdevices:RKeypad on the COMAND control unitRMultifunction steering wheelRVoice ControlThe explanations in this section assume thatthe mobile phone is connected to COMAND

96 General InformationTe

leph

one

via the Bluetooth® interface. Exceptions areexplicitly described.

Functional Restrictions

Under the following circumstances, thephone may not yet be useable:RIf it is not yet logged into a network. The

phone will try independently to log into anetwork. If no network is available, you willnot be able to make “911” emergency calls.If you try to make an outgoing call, themessage No Service appears briefly.

Activating the Mobile Phone

Mobile Phone WithBluetooth®Interface

Prerequisites for the Mobile PhoneFor making calls using COMAND via theBluetooth interface, you will need aBluetooth-enabled mobile phone.

i Not all mobile phones available on themarket are comparably suitable. Furtherinformation on suitable mobile phones andconnecting Bluetooth-enabled mobilephones to COMAND is available via theInternet at www.mbusa-mobile.com.

Activating Bluetooth®

Before you begin activation of your mobilephone connection via the Bluetooth interfaceplease ensure it is compatible with Bluetoothhandsfree profile 1.0 (Y mobile phoneoperating guide):X Switch on the mobile phone and enter the

PIN, if applicable (Y mobile phoneoperating guide).

X Activate Bluetooth connection on themobile phone (Y mobile phone operatingguide).

i On certain mobile phones, not only do youhave to activate the Bluetooth function butthe device must also be made “visible” forother devices.Each Bluetooth device has a Bluetoothdevice name. It is recommended to give thedevice a personal name, by which you canclearly recognize your mobile phone.

i If the Bluetooth function on the COMANDis switched off, the message Bluetoothnot activated in system settings.appears.

X Activate Bluetooth connection onCOMAND .

Registering a Mobile Phone(Authorizing)When you use your mobile phone inconjunction with COMAND for the first time,you must register (authorize) it.It is possible to register several mobilephones. The connection is always establishedto the mobile phone that was activated last.When you authorize a new mobile phone, it isactivated automatically. You can switchbetween the authorized mobile phones(Y page 99).

Searching for a Mobile PhoneX In the phone submenu select Phone£Phone List£Update.COMAND searches for suitable Bluetoothphones within range and enters them in thephone list.

i The duration of the search proceduredepends on the number and type ofBluetooth phones. The search may take afew minutes.

When first entering the device list and beforerunning an update, the black dot R indicatesthe active phone (found and authorized).After running an update:

Activating the Mobile Phone 97

Tele

phon

e

Z

1 The check marks Ò indicate if a phonehas been authorized (black) or not (grey)

2 Device not within range but previouslyauthorized (¿ appears in grey)

3 Phone icons indicate if a phone is found(black) or not (grey)

i If the device list already contains tenauthorized devices, you must de-authorizeone of the authorized devices(Y page 99). You will then have to switchthis device off and start the search again.Otherwise the new device you are lookingfor will not appear in the list.

X To start search again: Select Update

Entering PasscodeX Select the as yet unauthorized device (no

check mark yet) from the list.X Select Options£AuthorizeorX Press 9.X The input menu for the passcode appears.

i The passcode is any number chosen byyou between one and sixteen digits inlength. We recommend to use at least fourdigits because this improves the quality ofthe encryption during connection. Thepasscode can differ during eachauthorization for each device. You mustenter the same number on COMAND andon the device to be authorized. Please alsorefer to the instructions in the mobilephone operating guide.

X To enter from COMAND: Select the digitsin the menu bar one after the other.

X To correct entry: Select õ.X To cancel entry: Select Back.X To confirm entry: Select ?.If a Bluetooth connection is establishedsuccessfully, you will be prompted to enter acode on the mobile phone (Y mobile phoneoperating guide).X Enter the same passcode on the mobile

phone as you did on COMAND.The device is authorized. You can nowmake calls via COMAND’s hands-freedevice using the authorized mobile phone.

External AuthorizationIf COMAND cannot find your mobile phone,this may be due to special security settingson your mobile phone. In this case, you cancheck whether, conversely, your mobilephone can find COMAND.COMAND’s Bluetooth device name is “MBBluetooth”.X In the phone submenu select Phone£Phone List£Update£Options£External Authorization.

X Start the Bluetooth search on the mobilephone (Y mobile phone operator's guide).

98 Activating the Mobile PhoneTe

leph

one

X Select COMAND (“MB Bluetooth”) on themobile phone.

X When prompted to do so, enter thepasscode on the mobile phone and onCOMAND.

Displaying Details on a Mobile PhoneX In the phone submenu select Phone£Phone List.

X Select the mobile phone from the list.X Select Options£Details.

The details screen for the device isdisplayed.

X To close the details screen: Press9, :, ;, = or 9.

orX Press the 9 or the k button.

Deregistering (De-Authorizing) a MobilePhoneX In the phone submenu select Phone£Phone List.

X Select the authorized mobile phone.X Select Options £De-Authorize.

You will be asked whether the deviceshould really be de-authorized.

X Select Yes or No.If you select Yes, the authorization of thedevice is withdrawn.

i If the authorization of a device, which hadbeen authorized in the past, has beenwithdrawn and it is no longer found in thesearch, the device list no longer includesthis device.

Activating Another Mobile PhoneIf you have authorized several mobile phones,you can switch between the individual mobilephones.When you authorize a new mobile phone, it isactivated automatically. Only one mobilephone is active at a time.

X Select Phone£Phone List.X Select the mobile phone from the list.X Press 9.

The selected mobile phone is activated ifthe selected mobile is within receptionrange and its Bluetooth function isswitched on. Any previously activatedphone is deactivated.

Setting Transmit and Receive Volume

i These settings should normally not bechanged as the factory settings arematched to most mobile phones.

i Changes may result in significantimpairments to the transmission quality.These settings may not be changed duringan active phone call.

X In the phone submenu select Phone£Adjust Volume.

X Select Reception Volume orTransmission Volume.

i Reception volume and Transmission onlyappear for authorized devices.

X To set the volume: Press 9 or :.The red bar moves up or down.

X To confirm selection: Press 9.

Activating the Mobile Phone 99

Tele

phon

e

Z

“911” Emergency Call

G WarningThe 911 emergency call system is a publicservice. Using it without due cause is acriminal offense.

The following conditions must be met for a“911” emergency call:RPhone switched onRMobile phone network availableRValid SIM card in the phone (not required

on all mobile phone networks)RMobile phone connected with COMAND via

Bluetooth®

If you are unable to make an emergency call,you will have to initiate rescue measuresyourself.The “911” emergency number is a publicservice. Any abuse is punishable by law.X Enter the digits on the COMAND control

unit (Y page 107).X Press the 6 button.

The phone establishes the connection.X Wait until the emergency call center

answers, then describe the emergency.

Submenu Overview

Name Phone Call lists or Mic On/Off

Displays the COMAND phonebook

Phone list Displays or deletes call lists

Download Contacts Switches hands-freemicrophone on/off (during acall)Delete Contacts

Adjusts the Volume

Phone Main Menu

Switching to Phone ModeX Press the function button % on the

COMAND control unit.

i If you press the 6 button with thephone main menu already open, the call list“Calls Dialed” appears (Y page 104).

or

From another Main FunctionX Select Phone£Phone£Phone.

i If phone mode was active last, you onlyneed to select “Phone”.

Within the Phone FunctionX Select Phone£Phone.orX In the phone mode press the k button

repeatedly until the phone main menuappears.

100 Submenu OverviewTe

leph

one

Phone Menu

1 Phone service status2 Signal strength (if provided by phone)3 Call status4 Displays COMAND phone book5 Displays call list selection6 Speller with characters for entering phone

numbers7 Device name of the connected mobile

phone

COMAND Phone Book

The COMAND phone book is an extract ofentries from the address book. All theCOMAND address book entries having atleast one phone number can be found in theCOMAND phone book.

i For many operating functions you canalso use the buttons on the multifunctionsteering wheel, e.g. the =, ;,9, :, 9, 6 or ~ buttons, forselecting a menu, scrolling through lists orinitiating or ending a call (Y page 24).

Opening COMAND Phone Book X Open the phone main menu (Y page 100).X Select Name.

The COMAND phone book is displayed.

1 Address book entry2 Calls up options3 Search speller4 Closes phone book5 ¦ symbol for voice tag

Address book entries may have the symbol5. An additional voice tag is saved with theseentries.If an address book entry has the symbol +then this has more than one phone number.You can select these subentries(Y page 101).X To close phone book: In the search speller

select the symbol á.orX Press k.

Selecting an Entry

Selecting via ListX Press 9 or : until the desired entry

is highlighted.X To confirm selection: Press 9.

Selecting SubentriesX Select a phone book entry with the + icon

and press 9.The subentries appear. The + iconchanges to /.

COMAND Phone Book 101

Tele

phon

e

Z

1 Expanded phone book entry2 Phone book entry with subentries

X Press 9 or : and select the desiredsub-entry.

Displaying Details on an EntryCOMAND can also fully display anabbreviated entry.X Select entry.X Select Options£Details.

The details screen appears.X To close details screen: Press ; or= repeatedly until the entry ishighlighted again.

orX Press the k button.

Initiating Call to an Entry X Select entry (Y page 101).X Press 9orX Press the 6 button on the COMAND

control unit.

Creating a New Entry i When a new entry is added through the

COMAND phone book, it is saved to theaddress book.

X Select Options£New Entry in theCOMAND phone book.

X Select a number category, e.g. Home.X Select a telephone category, e.g. MobilePhone.

X Select Save.The input menu with data fields appears.

1 Cursor2 Data field3 Predictive speller4 Selected phone category

Switching Data FieldX Press 9 repeatedly until the smart

speller disappears.X Then press 9 or : to select desired

field and press9.orX Select [ or ] in the speller.

The input menu displays the data fieldselected.

Entering Data into a FieldX Select all the characters one after the other

in the predictive speller 3.

102 COMAND Phone BookTe

leph

one

i The predictive speller provides thecharacters corresponding to the selecteddata field.

X To switch predictive speller to upper orlower case characters: Select & or(.

X To switch predictive speller characterset: Select k.Every time this is selected it switches thecharacter set.

X To change the predictive spellerlanguage: Select !.

X Press 9 or : until the desiredlanguage is highlighted and then press 9.

X To move the cursor in the data field:Select Y or Z.

Deleting an EntryX To delete individual characters: Selectõ and briefly press 9.

orX Press the 2 button.

The character to the left of the cursor isdeleted.

X To delete an entire entry: Select õand press 9 until the entire entry has beendeleted.

orX Press the 2 button and hold it until the

entire entry is deleted.

Cancelling an EntryX Select á.If one of the data fields contains data, aprompt will appear asking whether you wishto store the entry.X Select Yes or No.

The entry will either be stored or not,depending on your selection.

Saving an EntryX Select d.

A corresponding message is displayed.

Deleting Entry The deletion rules vary according to the entryselected:RPhone book entry selected:

The entry is deleted in the COMAND phonebook and the address book if the addressbook entry only contains phone numbers.REntire address book entry selected:

The entry is deleted in the COMAND phonebook and additionally also in the addressbook if the address book entry onlycontains phone numbers.RSubentry of an address book entry

selected:The subentry is deleted in the COMANDphone book and in the address book.

X To delete: Select entry (Y page 101).X Select Options£Delete.

You will be prompted to confirm that youreally want to delete the entry.

X Select Yes or No.Yes option: The entry is deleted accordingto the above rules.

Adding Phone Number to a PhoneBook Entry X Select the address book entry.X Select Options£Add Phone No..X Select a number category, e.g. Home.X Select a phone category, e.g. MobilePhone.

X Select Save.If five numbers are saved for the entry in theselected number category, a prompt willappear asking whether you wish to overwriteone of the existing numbers.

COMAND Phone Book 103

Tele

phon

e

Z

X Select Yes or No.If you select Yes, a selection list will appearcontaining the five existing numbers.

X Select the number to be overwritten.The input menu with the data field forentering the new telephone numberappears.

X To enter digits: Select the required digitsin sequence from the predictive speller oruse the number keypad.

X To move the cursor in the data field:Select Y or Z.

X To delete individual digits: Select õand briefly press the 9 button.

orX Press the 2.

The digit to the left of the cursor is deleted.X To delete an entire entry: Select õ

and press 9 until the entire entry has beendeleted.

orX Press and hold down the 2 button until

the entire entry is deleted.X To save entry: Select d.

Call Lists

COMAND displays calls received (includingmissed calls) and made during phone modein their own lists.

i The particular menu item can only beselected if calls have already been receivedor made from COMAND.The display of missed calls in the COMANDdisplay is not possible with all mobilephones.

i The instrument cluster control systemdisplays a list of the last dialed calls.

i For many operating functions you canalso use the buttons on the multifunction

steering wheel, e.g. the =, ;,9, :, 9, 6 or ~ buttons, forselecting a menu, scrolling through lists orinitiating or ending a call (Y page 24).

Calling up the List X In the phone main menu select CallLists.A menu appears.

X Select Calls Received or CallsDialed.The appropriate list list appears.

orX When the basic telephone menu is

displayed, press the 6 button onCOMAND or on the multi-function steeringwheel.A list of the last dialed calls appears.

List of incoming calls1 List of calls received2 Date/time of the highlighted entry3 List entry options menu

X To select a list entry: Press 9or :.

X To close list: Select Back.orX Press the k button.

104 Call ListsTe

leph

one

Displaying Details on a List EntryCOMAND can also fully display anabbreviated list entry.X Select the list entry.X Select Options£Details.

The details screen appears.X Back to the list: Press ; or = until

the list is highlighted.orX Press the k button.

Saving Unsaved List EntryUnsaved list entries are displayed with thephone number.Saved list entries are displayed with thename. They are either saved in the addressbook or in the COMAND phone book.

Saving in the Address Book as a NewEntryX Select the list entry.X Select Options£Save£New Entry.

i Save has no function if the selected listentry is already stored in the address book.

X Select a number category, e.g. Home.X Select a telephone category, e.g. MobilePhone.

Number category Display (phoneand address book)

Not classified °

Home @

Work \

Phone category Display (phoneand address book)

Not classified °

Mobile ¢

Car ^

Pager ï

X Select Save.An input menu with data fields will appear.The data field for the phone number iscompleted automatically. The data field forthe last name is also completed if the entryto be saved contains a name.

1 Cursor2 Data field3 Speller4 Data field for phone number is completed

automatically5 Phone category6 Number category

X To switch data fields: Press 9 until thelast name is highlighted.

X Then press 9.orX Select [ or ] and press 9.

The selected data field is highlighted.X To enter data into a field: Select all the

characters one after the other in the speller3.

Call Lists 105

Tele

phon

e

Z

i The speller offers the characters thatcorrespond to the selected data field.

X To switch predictive speller to upper orlower case characters: Select ( or&.

X To switch predictive speller characterset: Select k.Every time this is selected it switches thecharacter set (digits, lower case letters).

X To change the predictive spellerlanguage: Select !.

X Press 9 or : until the desiredlanguage is highlighted and then press 9.

X To move the cursor in the data field:Select Y or Z.

X To delete individual characters: Selectõ and briefly press 9.

orX Press the 2 button.

The character to the left of the cursor isdeleted.

X To delete an entire entry: Select õand press 9 until the entire entry has beendeleted.

orX Press the 2 button and hold it until the

entry is deleted.X To save entry: Select d.

A corresponding message is displayed.X To cancel entry: Select Back.If one of the data fields contains data, aprompt will appear asking whether you wishto save the entry.X Select Yes or No.

The entry will either be stored or not,depending on your selection.

Adding a Phone Number from the CallList to an Existing Address Book EntryX Select the list entry.X Select Options£Save£Add PhoneNo.

i Save has no function if the selected listentry is already stored.

X Select a number category, e.g. Home.X Select a phone category, e.g. MobilePhone.

X Select Save.The search menu for address book entriesappears.

X Search for the desired entry.

i Please see the “Searching for an AddressBook Entry” section (Y page 111) for adetailed description on searching for anaddress book entry.

X Press 9 after completing the search.If there are fewer than five numbers savedfor the required entry in the selectednumber category, COMAND saves thedata.If five numbers are saved for the entry youare searching for, a prompt will appearasking whether you wish to overwrite oneof the existing numbers.

X Select Yes or No.If you select Yes, a selection list with thefive existing numbers is displayed.

X Select the number to be overwritten.COMAND overwrites the selected numberwith the new data.

Deleting Call Lists i The saved call lists are retained in

COMAND even if you use the COMANDwith another mobile phone. For this reasonyou should delete any call lists beforehanding over or selling the vehicle.

106 Call ListsTe

leph

one

X Select Call Lists£Delete CallLists from the basic telephone menu.A query appears asking if all call lists are tobe deleted.

X Select Yes or No.The call lists will either be deleted or not,depending on your selection.

Making Calls

Incoming Call

Rejecting or Accepting CallsIncoming calls are indicated by a dialogwindow.

X To reject: Select Reject.orX Press the ~ button on the COMAND

control panel or on the multifunctionsteering wheel.

X To accept: Select Accept.orX Press the 6 button on the COMAND

control panel or on the multifunctionsteering wheel.

After accepting the call, you will conduct theconversation over the hands-free system. Thecall volume can be adjusted (Y page 32).Please see the “Functions during a SingleCall” section for other functions(Y page 108).

i You can also accept a call as describedabove when COMAND is showing a display

of a different main application. The displayswitches to the telephone display after youaccept the call. After the call is finished,you see the display of the previous mainapplication again.

Initiating an Outgoing Call

Entering Phone Number via theCOMAND Control UnitX Open the phone main menu (Y page 100).X Enter all the digits on the numeric keypad

one after the other.X To delete individual digits: Press briefly

the CLR button on the COMAND controlunit.

X To delete an entire phone number: Pressand hold the CLR button until the numberis deleted.

X To place a call: Press the 6 button onthe COMAND control panel or on themultifunction steering wheel.

Entering Phone Number via Phone MainMenuX Open the phone main menu (Y page 100).X To enter digits: Select all the digits one

after the other in the speller.X To delete individual digits: Select õ

and briefly press the 9 button.orX Press the 2 button.X To delete an entire phone number:

Select õ and press 9 until the phonenumber has been deleted.

orX Press and hold down the 2 button until

the entire entry is deleted.

Making Calls 107

Tele

phon

e

Z

X To connect a call: Select ° at the bottomright-hand side of the speller.

orX Press the 6 button on the COMAND

control panel or on the multifunctionsteering wheel.

RedialingX Open the phone main menu .X Select ° at the bottom right-hand side of

the speller.orX Press the 6 button on the COMAND

control unit when the phone main menu isdisplayed.The dialed calls list appears. The call dialedlast will be at the top of the list.

X To select a call: Press 9 or :X To initiate call: Press 9.

Initiating a Call to a Call List Entry orCOMAND Phone Book EntryX Open the call list and select an entry

(Y page 104).orX Open the COMAND phone book and select

an entry (Y page 101).X To initiate call: Press 9.

Functions During a Single Call

Phone mode with a single call1 Other party2 Symbol for active phone connection3 Switches the hands-free microphone off

or on4 Sends DTMF tones (not possible with all

mobile phones)5 Device name of the connected mobile

phone6 Terminates call

Switching Hands-Free Microphone Onor OffX Open the phone main menu .X To switch off: Select Mic Off.

If the microphone is switched off, the >icon appears in the main area.

X To switch on: Select Mic On.The > symbol disappears.

DTMF Tone Transmissioni This function is not possible with all

mobile phones.Answering machines or other devices can becontrolled by DTMF tones, e.g. for remotequery functions.

108 Making CallsTe

leph

one

X To send individual characters: During acall select the required characters usingthe ; or = button.

orX Press the corresponding button on the

COMAND control unit keypad.Every character selected will betransmitted immediately.

X Transmitting phone book entry as asequence of characters: Select Name.

X Select the desired phone book entry.The entry is transmitted immediately as asequence of characters.

X To switch back to the call display: SelectBack.

Ending an Active CallX If necessary, open the phone main menu .X To terminate call: Select 4.orX Press the ~ button on the COMAND

control panel or on the multifunctionsteering wheel.

Call Waitingi The call waiting function must be

supported and activated by the phoneprovider.

If you are conducting a single call and youreceive another, the second call number isentered into the received calls list and a signaltone will sound.

Address Book

G Warning!Please devote your attention first andforemost to the traffic situation you are in.Before your journey, please familiarizeyourself with the address book functions.

Only use the COMAND when road and trafficconditions permit you to do so. Otherwise youcould be involved in an accident in which youor others could be injured.

General Information The entries of the address book can be usedfor making phone calls and navigationdestination entries.

i You should delete your personal databefore selling your vehicle, using the Resetfunction (Y page 45).

Opening the Address Book

From Another Main FunctionX Select Phone£Phone£Address Book.

i If the address book was last open in thetelephone function, you only need to selectPhone.

Within the Phone FunctionX Select Phone£Address Book.

The address book main display appears.

Address book with address book entry ¥ andnavigable data ¤

i An address book entry may contain up tofive phone numbers and both a private andbusiness address.

Address Book 109

Tele

phon

e

Z

Submenu Overview for Address Book

Address Book Search

Downloadingcontacts (frommobile phone, frommemory card orbusiness cards)Deleting contacts

Searching for anaddress book entry

New Delete

Creating a newaddress book entry

Deleting an addressbook entry

Selecting Entry in the Address BookX Press ; or = if the display/selection

window is active.

Creating a New Address Book Entry i You can create address data directly in

the address book. If you save phonenumbers in the COMAND phone book,these are saved in the address book. Whenyou save a navigation destination,COMAND creates an address book entrycontaining the complete address data thatsupport navigation.

X Open the address book (Y page 109) andselect New.The input menu containing data fields andthe speller appears.

Input menu with data fields1 Selected data field with cursor2 Speller

Switching Data FieldX Press 9 repeatedly until the predictive

speller is hidden.X Then press 9 or : and press 9.orX Select [ or ] in the speller.

The input menu indicates the selected datafield.

Entering Data into a FieldX Select all the characters one after the other

in the predictive speller 2.

i The predictive speller provides thecharacters corresponding to the selecteddata field.

X To switch predictive speller to upper orlower case characters: Select ( or&.

X To switch predictive speller characterset: Select k.Every time this is selected it switches thecharacter set.

X To change the predictive spellerlanguage: Select !.

110 Address BookTe

leph

one

X Press 9 or : until the desiredlanguage is highlighted and then press 9.

X To move the cursor in the data field:Select Y or Z.

DeletingX To delete an individual characters:

Select õ and briefly press 9.orX Press the 2 button.

The character to the left of the cursor isdeleted.

X To delete an entire entry: Select õand press 9 until the entire entry has beendeleted.

orX Press the 2 button and hold it until the

entire entry is deleted.

Canceling an EntryX Select á.

If one of the data fields contains new data,a prompt will appear asking whether youwish to store the entry.

X Select Yes or No.The entry will either be stored or not,depending on your selection.

Saving an EntryX Select d.

The address book displays the entry.

Searching for an Address Book Entry

X Open the address book (Y page 109) andselect Search.If there are more than eight entries, thesearch menu with the smart spellerappears.

Search menu with search speller1 ¥ symbol for address book entry2 ¤ symbol for complete address data

from the navigation3 å symbol for phone book entry from the

mobile phone4 ¦ symbol for voice tag5 Search spellerEntries without symbols or with the symbols1 and 3 are just address book entries. Avoice tag has additionally been saved forentries with the symbol 3. Entries with thesymbol 2 contain complete address datafrom the navigation system, which supportnavigation and are covered by the digital mapdata. You can quickly start route guidance tothis kind of entry (Y page 114).

Switching from the Search Speller tothe ListX Press the 9 button or 9 button and

hold it until the speller is hidden.orX Select d.

Switching from the List to the SearchSpellerX Select Back from the list.orX Press the k button.

Address Book 111

Tele

phon

e

Z

Searching

Searching via Search SpellerX Switch from the list to the search speller if

necessary.X To change the search speller language:

Select !.X To switch search speller character set:

Select k.Depending on the previous setting, you willchange to letters with special characters orto numbers with special characters.

X To enter characters: Select thecharacters for the required entry one afteranother.

X To delete individual characters: Selectõ and briefly press 9.

orX Press the 2 button.

Each time you enter or delete a character,the closest match will be displayed at thetop of the list.

X To delete an entire entry: Select õand press 9 until the entire entry has beendeleted.

orX Press the 2 button and hold it until the

entire entry is deleted.X To end search: Switch from the search

speller to the list.The top list entry is highlightedautomatically.

X Back to the address book: If necessary,switch from the list to the smart speller andselect á in the smart speller.

orX Press the k button.

Searching via the ListX If necessary, switch from the smart speller

to the list (Y page 111).X Press 9 or : until the desired entry

is highlighted in the list.

Deleting Entry X Search for the required entry

(Y page 111).X Select Options£Delete.orX Select Delete from the address book

(Y page 109).A deletion prompt appears.

X Select Yes or No.The entry will be deleted or retained on thebasis of the selection.

i Deleting an entry in the phone book onthe mobile phone deletes the entry in theaddress book.

Displaying Details About an AddressBook EntryX Switch from the smart speller to the list

(Y page 111).orX Select an address book entry from the

address book (Y page 110).X Press 9.

The detailed display appears.

112 Address BookTe

leph

one

Details screen for private data1 Back to the previous menu2 Selected data field3 @ symbol private data4 Calls up options5 \ symbol for business data

Selecting Another Data FieldX Press 9 or :.

Displaying Abbreviated Content in FullX Select Options£Details.

The complete display appears.X To close complete display: Press ;

or =or 9.orX Press the k button.

Closing Details ScreenX Select Back.orX Press the k button.

Changing Entry

Changing an Address Book EntryX Search for the address book entry

(Y page 111).X Select Options£Change Entry.orX Display details about an address book

entry.X Select Options£Change Entry.

The input menu with data fields appears.

X Continue from the step "Switching DataField" in the "Creating a New Address BookEntry" section (Y page 110).

Changing Category of a Phone NumberData FieldX Display the details for an entry and

highlight the phone number data field(Y page 112).

X Select Options£Change Category.X Select a number category, e.g. Home.X Select a telephone category, e.g. MobilePhone.

X Select Preferred, where applicable.Depending on the previous state, switchthe option on Ç or off c. The phonenumber is displayed as the first number in

Address Book 113

Tele

phon

e

Z

the phone book and can be dialedimmediately.

X Select Save.The new category is saved.

Initiating a Phone Call to an Entry i The mobile phone must be connected via

the Bluetooth® interface.

X Display the details for an entry andhighlight the phone number data field(Y page 112).

X Press 9.The phone initiates the call. The displayswitches to the phone mode display.

orX Select Options£Call.

The phone initiates the call.

Starting Navigation to an Entry i You can use this function as soon as you

have saved a destination in the destinationmemory (Y page 90). COMAND then alsosaves the destination in the address bookwith the complete address data thatsupport navigation.

X Search for an address book entry with the¤ symbol (Y page 111).

X Display the details about an entry andhighlight the address data field(Y page 112).

X Press 9.

i Pressing 9 only works if the address datafield contains complete navigable data.This is indicated by the ¤ symbol.

orX Select Options£Navigate.

i Navigate can only be selected when theaddress data field contains complete

navigable data. This is indicated by the ¤symbol.

1 Address that supports navigation2 Opens Enter Destination menuThe Enter Destination menu appears, theselector bar is located at the menu itemStart (Y page 68).

Voice Tags i Voice tags can be entered via Voice

Control System.

Adding or Changing Voice Tagi You can add one voice tag per address

book entry.

X Search for an address book entry withoutor with a voice tag (¦ icon)(Y page 111).

X Select Options£Voice Name£Add orChange.The process continues by voicecommands. The Voice Control Systemguides you through the dialogs(Y page 195).

114 Address BookTe

leph

one

Deleting Voice TagX Search for the address book entry with a

voice entry (Y page 111).X Select Options£Voice Name£Delete.A deletion prompt appears.

X Select Yes or No.COMAND deletes the voice entrydepending on your selection.

Listening to Voice TagX Search for the address book entry with a

voice entry (Y page 111).X Select Options£Voice Name£Listen.You will hear the voice tag.

Downloading Contacts You can download contacts into the addressbook from an external Bluetooth device ormemory card.

i Bluetooth® devices must be inside thevehicle, switched on, activated, authorizedand capable of sending contacts and/orvCards via Bluetooth®.

Downloading DataX Start communication at the external device

(Y operator’s guide of the external device).orX Insert memory card.X Select Address Book£DownloadContacts on COMAND.A selection menu appears.

X Select From Mobile Phone or FromMemory Card or Receive BusinessCards.

X Press 9.The download begins.

Deleting DataX When the address book is displayed, selectAddress Book£Delete Contacts.

Address Book 115

Tele

phon

e

Z

116

Audio Menu ....................................... 118Radio .................................................. 119HD Radio™ ......................................... 122Satellite Radio ................................... 125CD Audio/DVD Audio/MP3 .............. 130Music Register .................................. 142Media Interface ................................. 145Audio Aux .......................................... 151

117

Audi

o

Audio Menu

i Information on the COMAND controlsystem and how to operate it can be foundon (Y page 20).

i For many operating functions you canalso use the buttons on the multifunctionsteering wheel, e.g. the =, ;, 9or : buttons, for selecting a channel ora menu or scrolling through lists(Y page 24).

Vehicle Equipmenti This Operator’s Manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Calling up the Audio MenuX Select Audio

The audio mode last active is switched on.orX Press the $ function button.

Radio mode is switched onX Select Audio

The audio menu appears.

i If radio mode was active last, you onlyneed to select Audio.

Display with Audio menu1 Main function line2 Current audio mode3 Audio menuYou can switch to the various audio modes inthe audio menu:RFM / AM radio mode (Y page 119)RSatRadio mode (Y page 125)RCD-/DVD audio/MP3 mode (Y page 130)RMemory Card (Y page 134)RMusic Register (Y page 142)RMedia Interface (Y page 145)RAux mode (Y page 151)

Rear Playback Mode Rear playback mode channels the audiosource from the Rear Seat EntertainmentSystem to COMAND for playback through thevehicle speakers.X Switching on Rear playback mode:

Select Rear from the Audio menu

118 Audio MenuAu

dio

Radio

Switching to the Radio

From the COMAND Control UnitX Press the $ function button.orX Select Audio£Audio£FM/AM Radio in

the display.

i Press the button repeatedly to switchwavebands in the sequence FM, AM, WB(Y page 120) and SatRadio mode(Y page 125). Pressing again will switchback to FM radio mode.

Within the Audio FunctionX Select Audio£FM/AM Radio.

The radio display appears. The last selectedstation in the last selected waveband isheard.

Radio display1 Main area with tuning dial2 Memory preset number

3 Name of selected station4 Frequency of selected station5 Sound settings6 WB (Weather band)7 AM radio8 FM radio9 Stored station lista Radio functions

Radio 119

Audi

o

Z

Submenu Overview

Radio (FM and AMonly)

Presets (FM and AMonly)

Channel (WB only) Sound

Enter Frequency Autostore List of receivablechannels

Treble

Ç Stationinformation (onlyFM)

List of storedstations

Bass

Balance/Fader

Surround sound

Switching WavebandsYou can switch the radio between the FM,AM, and WB wavebands.X Select FM, AM or WB in the radio display.

The last selected station in the selectedwaveband is heard.

i In the WB waveband, COMAND displaysthe channel name instead of the stationnames and/or frequency.

orX Press the $ function button on the

control unit repeatedly until the desiredband is selected.

i Press the button repeatedly to switchwaveband in the sequence of FM, AM, WBand SatRadio mode. Pressing again willswitch back to FM radio mode.

Tuning to a StationYou can tune to a station via station searchor by manual frequency input.

Tuning to a Station via Station SearchX Press ; or = when the main area is

highlighted.orX Press E or F on the COMAND

control unit.The search proceeds upwards ordownwards and stops at the nextreceivable station.

Tuning to a Station via ManualFrequency InputX Select Radio£Enter Frequency in the

radio display.An input menu appears.

orX Press l on the control unit.X To enter a frequency: Press number

buttons on the control unit.

i You can only select numbers that arecurrently permissible.

COMAND will tune to the frequency entered.

i If in the FM or AM wavebands you enter afrequency outside the frequency sub-range, COMAND will select the nextfrequency down.

120 RadioAu

dio

Tuning to a Station via the StationMemoryX Select Presets in the radio display.orX Press 9 when the main area is highlighted.

The station memory appears. The dot R infront of a preset indicates that the currentlytuned station is stored there.

X To select a station: Press 9 or :.X To tune to a station: Press 9.orX Press a number key, e.g. 4, on the control

unit.

Wavebands Frequency

AM (MF) 530 - 1700 kHz

FM (VHF) 87.7 - 107.9 MHz

WB (Weather Band) Weather channels

Storing StationsThere are 10 presets available for FM, AM andSatRadio wavebands.

Storing Stations ManuallyX Press 9 when the main area is highlighted.orX Select Presets in the radio display.

In both cases, the station memory willappear. The dot R in front of a presetstation indicates the station the radio iscurrently tuned to.

Station memory

X To store a station to a selected preset:Press and hold 9 until a signal tonesounds.

orX Press and hold a number key, e.g. 4, until

a signal tone sounds.The station is stored.

Storing via Autostorei The function automatically assigns

receivable stations to the presets, sortedaccording to reception quality. The stationswhich were stored in the station memorymanually are overwritten.

X Press 9 when the main area is active.X Select Autostore.orX Select Presets£Autostore in the radio

display.COMAND searches for receivable stations.A corresponding message is displayed. Theavailable stations are automatically storedunder the presets.

Canceling Autostore ProcedureX Select Cancel.

Radio 121

Audi

o

Z

Switching to Weather BandX Press : to highlight the submenu.X To select the weather band: Press ;

or = until WB is highlighted.X Press 9.

1 Main area with tuning dial2 Currently received channel3 Sound settings4 Weather band5 AM radio6 FM radio7 Channel list

Searching a ChannelX Press ; or = when the main area is

highlighted.orX Press E or F on the control unit.

The search proceeds upwards ordownwards and stops at the nextreceivable channel.

Selecting a Channel from Channel listX Press : to highlight the submenu.X To call up the channel list: Press ; or= until Channel is highlighted.

X Press 9.The channel list appears.

X To select a channel: Press ; or =.X To tune to the selected channel:

Press 9.orX Press a number key, e.g. 4, on the control

unit at any time.

HD Radio™

Important NotesIn chapter “HD Radio™, you will find detailedinformation aboutRthe special features of HD Radio that

distinguish it from analog AM and FM radioRselecting an HD Radio stationRdisplaying program information.

i Optional HD Radio® equipment isrequired for the HD Radio operationdescribed here. A special subscription,however, is not necessary.

i HD Radio features includeRdigital broadcasts in the same waveband

as analog AM/FM; the analog AM/FMstations remain at their current place onthe dialRthe ability to broadcast multiple program

streams over a single FM/AM frequency(e. g. HD1, HD2, etc.Rstatic-free, clear reception

122 HD Radio™Au

dio

RFM stations offer CD quality sound, AMstations sound like analog FM stationsRa variety of data services, including

textbased information – artist name,song title, etc. – shown on the display.

More information on HD Radio you will findat http://www.hdradio.com.

i Note that subprograms and program infoshown in illustrations are dependent onprogram content delivered by the radiostations. Program content is subject tochange. Therefore, subprograms andprogram info shown in illustrations anddescriptions contained in this manual maydiffer from the subprograms and programinfo delivered by the radio station.

Switching to HD Radioi Since HD Radio stations are embedded in

the AM/FM waveband, HD Radio operationis very similar to analog AM/FM radiooperation. In this chapter only the functionsthat differ from the normal FM radiofunctions are described separately.

Analog AM/FM radio operation is describedin chapter “Radio”(Y page 119).You will only hear HD Radio programs if theHD Radio function is activated in the radiosubmenu.

X Select Radio£HD Radio in the radiodisplay.If the checkbox Ç is checked, HD Radio isactivated.

HD Radio®Display

1 Main area with station or frequency2 Memory preset number3 Name of selected station with HD symbol

and program number4 Station frequency5 Sound settings6 FM, AM or WB radio7 Program info8 Stored station list9 Radio functions

HD Radio™ 123

Audi

o

Z

Submenu Overview

Radio (FMand AMonly)

Presets(FM andAM only)

Channel(WB only)

Info FM Sound

EnterFrequency

Autostore List ofreceivablechannels

ProgramInformation

FM Treble

Ç ShowStationInformation

List ofstoredstations

AM Bass

ÇHDRadio

WB Balance/Fader

Surroundsound

Switching WavebandsYou can switch the radio between the FM,AM, and WB wavebands.X Select FM (or AM, WB)£FM, AM or WB in the

radio display.The last selected station in the selectedwaveband is heard.

i In the WB waveband, COMAND displaysthe Channel name instead of the stationnames and/or frequency.

orX Press the $ function button repeatedly

until the desired band is selected.

i Press the button repeatedly to switchwaveband in the sequence of FM, AM, WBand SatRadio mode (Y page 125). Pressingagain will switch back to FM radio mode.

Tuning to a StationYou can tune to a station via station searchor by manual frequency input.

Tuning to a StationYou can tune to an HD Radio station in thesame way as you would tune to a normal FMRadio station (Y page 120).

124 HD Radio™Au

dio

Storing StationsPlease refer to “Storing Stations” in the Radiosection (Y page 121).

Displaying Program InfoX Select Info in the radio display.

Information on the program currently tunedto is displayed. The content and scope ofthe information depends on the HD Radiostation.

Switching to Weather BandX Select FM (or AM)£WB in the HD Radio

display.X Press 9.For searching and selecting stations pleaserefer to (Y page 122).

Satellite Radio

Important NotesIn this chapter, you will find detailedinformation regardingRselecting a channel and a program categoryRmemory functionsRsound adjustmentsIf you have not done so already, pleasefamiliarize yourself with these functions byreading chapter “At a glance”.

i Optional satellite radio equipment and asubscription to satellite radio serviceprovider are required for the satellite radiooperation described here.

i Note that categories and channels shownin illustrations are dependent onprogramming content delivered by theservice provider. Programming content issubject to change. Therefore, channel andcategories shown in illustrations and

descriptions contained in this manual maydiffer from the channels and categoriesdelivered by the service provider.Satellite radio service may be unavailableor interrupted from time to time for avariety of reasons, such as environmentalor topographic conditions and other thingswe can’t control. Service might also not beavailable in certain places (e.g., in tunnels,parking garages, or within or next tobuildings) or near other technologies.

i SIRIUS XM Radio provides over 130channels of digital-quality radio, including100% commercial-free music, sports, newsand entertainment.SIRIUS XM Radio uses a fleet of high-powersatellites to broadcast 24 hours per day,coast-to-coast, in the contiguous U.S.This diverse, satellite-deliveredprogramming is available for a monthlysubscription fee. For more information, callthe SIRIUS XM Service Center(Y page 129) or contact www.sirius.com(USA) or www.siriuscanada.com (Canada).

Subscribing

Subscribing to Satellite RadioTo switch to satellite radio operation:X From another main function: SelectAudio£Audio£SatRadio.

i If radio mode was active last, you onlyneed to select Audio.

X Within the audio function: Select Audio£SatRadio.The Satellite radio main menu will appearand displays the Weather channel. Youcannnot select any other station.

X Select SatRadio (from the submenu)£Service.The Service information display will appear.

Satellite Radio 125

Audi

o

Z

Service information display1 Phone number of the provider, (SIRIUS

XM) or Call Service Provider2 SIRIUS ID of your satellite receiver

X Contact satellite radio service provider atthe telephone number displayed in thescreen.

i It is also possible to activate the satelliteservice online. To do so please visit SIRIUSXM Radio’s website at www.sirius.com(USA) or www.siriuscanada.com (Canada).

After the connection is made:X Follow the instructions given by the

operator.The activation process may take up to10 minutes. If it is successful, you will seethe display with the message No Service(Y page 126) followed by the Satellite radiomain menu (Y page 126).

i If a subscription is not included withsystem purchase, credit card information isrequired to activate your account.If a satellite receiver is not installed or notproperly installed, the message DeviceUnavailable will appear.

Satellite Radio Operationi For many operating functions you can

also use the buttons on the multifunctionsteering wheel, e.g. the ;, =, 9or : buttons, for selecting a channel ora menu or scrolling through lists(Y page 24).

Switching onSee “Subscribing to Satellite Radio” forimportant subscription information(Y page 125).To switch to satellite radio operation:X From another main function: SelectAudio£Audio£SatRadio.

i If radio mode was active last, you onlyneed to select Audio.

X Within the audio function: Select Audio£SatRadio.

i No Satellite receiver:The message No Satellite Radio willappear in a window.

The message No Service will appear at startup or when the signal is not available.After the COMAND acquires the signal, theSatellite radio display will appear. The stationlast tuned to will begin to play.

126 Satellite RadioAu

dio

Satellite radio main menu1 SatRadio main display2 Channel name3 Memory preset number4 Selected category/channel number5 Channel info (short)6 Sound settings7 Category list8 Channel info (detailed)9 Preset channel lista SatRadio menu

i You can display 5 in full:RChannel information (Y page 129)

Changing the CategorySatellite radio stations are split up intocategories. You can select between variouscategories such as News/Talk, Sports andCountry, if available. The category list issorted alphabetically.

Selecting a CategoryX To call up the category list: Press ;

or = until Category is highlighted in thesubmenu.

X Press 9.The category list appears.

X To select a category: Press 9or :.

X To set the selected category: Press 9.The selected category will appear in thedisplay. The channel last tuned to in thenew category will begin to play.At the beginning of the category list thecategory All Channels will appear. Thiscategory is sorted numerically (by channelnumbers) and allows you to scroll throughall available channels.

Selecting a ChannelYou can use the following functions:RChannel searchRChannel selection via direct entry

(Y page 128)RSelecting a channel from the SatRadio

channel list (Y page 128)RSelection from the preset menu

(Y page 129)

Channel SearchX Press ; or = if the SatRadio main

display is highlighted.orX Press E or F on the control unit.

The search proceeds upwards ordownwards and stops at the next channelin the selected category.

SatRadio MenuX On the submenu bar press ; or =

until SatRadio is highlighted.X Press 9.

Satellite Radio 127

Audi

o

Z

The SatRadio menu appears.

Entering a Channel Number DirectlyX Select SatRadio£Enter Channel in the

SatRadio menu.An input dialog appears.

orX Press l on the control unit.X To enter a channel: Press corresponding

number buttons on the control unit.COMAND will tune to the channel entered.

i You can only select numbers that arecurrently permissible.

Selecting a Channel from the SatRadioChannel ListX Select SatRadio£Channel List in the

SatRadio menu.The channel list appears.

X To select a channel: Press 9 or :.X To tune to the selected channel:

Press 9.

Memory Functionsi There are 10 presets available.You can use the following functions:RSaving channels manuallyRSelecting a channel from the Satellite

preset memory

Storing Channels ManuallyX Press 9 if the main area is highlighted.orX Select Presets on the SatRadio submenu

bar.In both cases, the channel memory willappear. The dot R in front of a presetindicates that the currently tuned channelis stored there.

Station Memory

X To select a preset: Press 9 or :.X To store a channel to a selected preset:

Press and hold 9 until a signal tonesounds.

orX Press and hold a number key, e.g. 4, until

a signal tone sounds.The channel is stored.

Storing via Autostorei The function automatically assigns

receivable channels to the presets. Thechannels which were stored in the channelmemory manually will be overwritten in thisprocess.

X Press 9 when the main area is active.X Select Autostore.orX Select Presets £Autostore from the

SatRadio submenu.COMAND searches for receivablechannels. A corresponding message is

128 Satellite RadioAu

dio

displayed. The available channels areautomatically stored under the presets.

Canceling storage procedureX Select Cancel.

Selecting a Channel from the Memory ListX To call up the channel list: In the

submenu press ; or = untilPresets is highlighted.The presets list appears.

X To select a channel: Press 9 or :.X To tune to the selected channel:

Press 9.orX Press a number key, e. g. 4 on the control

unit.

Displaying InformationX In the submenu press ; or = untilInfo is highlighted.

X Press 9.Information about the current programappears.

1 Category2 Channel3 Artist4 Song titleYou will see (if available)Rthe full nameRadditional information

X To switch back to the SatRadio maindisplay: Press ; or =.

Displaying Service InformationYou can call the provider service center forquestions or releases whenever you need.X Select SatRadio£Service in the

SatRadio submenu.The service information appears.

1 Phone number of the provider, (SIRIUSXM) or Call Service Provider

2 SIRIUS ID of your satellite receiver

X To switch back to the SatRadio maindisplay: Press ; or =.

Channel List UpdatesWhile receiving a new channel list themessage Updating Channels will appear.The channel last tuned to will be muted untilthe update is completed. You cannot operatethe satellite radio.After completion of the update, the Satelliteradio main menu will appear. The channel lasttuned to will begin to play.

Sound SettingsRefer to chapter “At a glance” on how toadjust sound settings.RVolume (Y page 32)RBalance and fader control (Y page 32)

Satellite Radio 129

Audi

o

Z

RBass and treble control (Y page 32)RSurround sound (Y page 33)

CD Audio/DVD Audio/MP3

Safety Instructions

G WarningCOMAND is classified as a Class 1 laserproduct. You must not open the casing. Thereis a risk of exposure to invisible laser radiationif you open the casing, or if the casing is faultyor damaged.COMAND does not contain any parts that youare able to maintain yourself. For safetyreasons, all maintenance work must beexclusively carried out by qualifiedtechnicians.

G WarningOnly carry out the following when the vehicleis stationary:RInserting a discREjecting a disc

There is a risk of accident by being distractedfrom road and traffic conditions if you load aCD/DVD while the vehicle is in motion.

Notes on MP3 Mode

Permissible Storage MediaRCD-R and CD-RWRDVD+R and DVD+RWRDVD-R and DVD-RWRSD memory card

Permissible File SystemsRISO9660/Joliet for CD storage mediaRUDF for DVDsRFAT16 for SD card with storage medium

Multisession CDsOn multisession CDs, the content of the firstsession determines how COMAND handlesthe CD.If the first session, for example, contains datain audio CD format and the second sessioncontains MP3 tracks, COMAND handles theCD as a conventional audio CD. This meansthat the MP3 tracks cannot be accessed.Similarly, if the first session contains MP3tracks and the second session contains datain audio CD format, COMAND handles the CDas an MP3 CD. Only the MP3 tracks can beaccessed.

File Structure of Storage MediumWhen creating an MP3 storage medium, youcan organize MP3 tracks into folders. A foldercan also contain additional folders. A storagemedium may have a maximum of 255 foldersin total. A maximum of 255 tracks and 255folders are permissible per folder. Amaximum of 1200 tracks in total arepermissible per storage medium.

Track Names and Folder NamesWhen creating an MP3 storage medium, youcan assign names to the MP3 tracks and tothe folders.COMAND uses these names in MP3 mode forthe corresponding display. Empty folders orfolders containing data other than MP3 trackswill not be displayed by COMAND.If MP3 files are stored in the root directoryitself, the root directory also counts as afolder. COMAND will then display the rootdirectory name as a folder name.Please note the following when assigningtrack names:

130 CD Audio/DVD Audio/MP3Au

dio

RTrack names must contain at least onecharacter.RTrack names must have the extension

“mp3”.RA period must appear between the track

name and the extension.

i COMAND does not support ID3 tags.

Permissible FormatsCOMAND supports the following formats:RMPEG1 audio layer 3 format

i In everyday speech, this formatdesignation has been replaced by thedesignation “MP3”.RMicrosoft Windows® Media Audio V2, V7,

V8 und V9 (WMA).

Notes on CopyrightThe music tracks that you can create forplayback in MP3 mode are generallycopyright-protected under applicableinternational and national laws.In many countries, the reproduction ofcopyrighted material is not permitted even ifonly for personal use without the expressprior consent of the copyright holder.Please check the current copyright laws foryour country and comply with them.These restrictions do not apply, for example,to your own compositions and recordings orfor recordings for which authorization hasbeen obtained from the copyright holder.

Notes about Audio DVD DiscsCOMAND can playback commerciallyavailable, prerecorded audio DVDs that bearthe following label. You will usually find thelabel on the DVD booklet, the inlay or the DVDitself.

i Audio DVDs differ from recordable DVD-Rand DVD-RW discs.

Data on audio DVDs are stored either inuncompressed format or in losslesscompressed format. The sound quality onaudio DVDs is therefore better than onrecordable DVDs that contain MP3 databecause the MP3 format uses a lossy type ofcompression. You cannot delete data from orrecord additional data to commerciallyavailable, prerecorded audio DVDs. Pleasenote the following information about CDs/DVDs and pay special attention to the noteson copied and/or selfwritten CDs/DVDs.

Permissible Bit and Scan RatesRFixed and variable bit rates from 32 kbps

to 320 kbpsRScan rates from 8 kHz to 48 kHz

i Only use MP3 tracks with a bit rate of128 kbps or higher and with a scan rate of44.1 kHz or higher. Lower rates may resultin impaired sound quality. This isparticularly true if the surround soundfunction has been activated.

WMA (Windows® Media Audio) format of thefollowing type:Rfixed bit rates from 5 kBit/s up to

384 kBit/sRsampling rates from 8 kHz to 48 kHz.COMAND does not support WMA files of thefollowing type:RDRM (Digital Rights Management)

encrypted files

i If other music files are stored in theseaudio formats on a storage medium, in

CD Audio/DVD Audio/MP3 131

Audi

o

Z

addition to MP3 files, the loading processmay take longer before the first track isplayed.

Notes about CD/DVD Discs i Discs with copy protection do not comply

with the CD audio standard and in somecases cannot be played by COMAND. Whenplaying copied discs, problems may occurwith the playback.

A wide variety of discs, disc writing softwareand writers are available. Due to this varietywe cannot guarantee that the system will beable to play discs that you have written/copied yourself.There may be playback problems withuserburned CDs with a storage capacity ofmore than 700 MB. These CDs do not meetcurrent valid standards.

i When playing a DVD audio, it may be thecase with numerous albums that the lasttrack does not contain any music andCOMAND switches to the next track. Thisis due to the production method and doesnot imply a fault with the unit.

! Do not attach stickers or labels of anykind to discs. They may come loose anddamage COMAND.COMAND has been designed for discsmeeting the requirements of standardEN 60908. Therefore, only discs with amaximum thickness of 1.3 mm can beused.If a thicker disc is inserted, e.g. one whichstores data on both sides, (DVD on oneside, audio data on the other side), thiscannot be ejected and COMAND will bedamaged.Do not use 8 cm diameter discs, not evenwith an adapter. Only use round discs witha diameter of 12 cm.

i COMAND can play audio CDs with thehighresolution surround format.

Notes on the Care of CD/DVD Discs ROnly touch the discs at the edges.RHandle discs with care in order to prevent

malfunctions during playback.RAvoid scratching, leaving fingerprints and

dust on the discs.RClean the discs occasionally with a

commercially available cleaning cloth.Always wipe in a straight line from theinside outwards, never in a circular motion.RThe discs must only be labelled using pens

specially designed for this purpose.RAfter use, put the discs back into the box.RProtect the discs from heat and direct

sunlight.

Loading CDs and DVDs

G WarningOnly insert a CD or DVD when the vehicle isstationary. There is a risk of accident by beingdistracted from road and traffic conditions ifyou load a CD/DVD while the vehicle is inmotion.Bear in mind that at a speed of just 30 mph(appr. 50 km/h), your vehicle is covering adistance of 44 feet (appr. 14 m) every second.

i If the CD/DVD is printed on one side, thisside must face upwards when loaded. Ifneither side is printed, the side to be playedmust face downwards.The system may not be able to play copy-protected CDs/DVDs.

Loading the DVD ChangerThe DVD changer is a magazine with six built-in compartments.

132 CD Audio/DVD Audio/MP3Au

dio

Loading an Individual MagazineCompartmentX Press the Load button V.

A menu indicates which magazinecompartments are currently loaded. Thehighlighted or currently playingcompartment is indicated by a red number.

Magazine Menu

X To select magazine compartment:Press ; or =

X To start loading: Press 9.The DVD changer will switch to the selectedmagazine compartment. The messagePlease Wait... will be displayed.Then message Please Insert Disc<x> will be displayed.

i Only insert a CD after COMAND hasprompted you to do so with this message.Only insert one CD per magazinecompartment.

X Insert a disc into the slot 1 with theprinted side upwards.The DVD changer pulls in the disc andplaces it in the selected magazinecompartment. The message LoadingDisc <x> will be displayed.

i The loading process may take a while,depending on the type of disc. If you do notinsert a disc, the display will switch back tothe magazine menu after approximately20 seconds.

The DVD changer plays the disc ifRit has been inserted correctlyRit is a permissible disc.

Magazine menu, one disc loaded1 Magazine compartment occupied,

ejecting possible2 Empty magazine compartment

X To exit menu: Press the Load button again.orX Select BackorX Press the k button

Filling Empty Magazine CompartmentsX Press the Load V button.

The magazine menu appears. The currentlyplaying compartment is indicated by a rednumber or, if the magazine is empty,compartment 1 is marked.

X Select Fill Empty Slots.The message Please insert disc <x>will be displayed.

CD Audio/DVD Audio/MP3 133

Audi

o

Z

i Only insert a CD after COMAND hasprompted you to do so with this message.Only insert one CD per magazinecompartment.

X Insert a disc into the slot with the printedside facing upwards.You see the Please wait... message.Once the disc is loaded, the DVD changerswitches to the next empty compartment.You see these messages: Please waitand then Please insert disc <x>.

X Repeat the step until all compartments areloaded.The DVD changer plays the last disc youloaded if it has been inserted correctly andif it is a permissible type.If loading is not completed, COMAND playsthe first disc inserted.

X To end loading procedure: Press the LoadV button again.

orX Select Back.orX Press the k button.

Loading SD Memory Card i COMAND does not support the SD card

format “SD-HC 2.0 Standard”. Memorycards with over 2 GB of storage capacityare not supported. Not all SD memorycards and storage media are designed forthe temperatures which may be reached inthe vehicle.Due to the wide range of SD memory cardsavailable on the market, playback cannotbe guaranteed for all brands of SD memorycard.

X Push the SD memory card into the slot.The end with the contact must pointtowards the slot.COMAND loads the memory card anddisplays the message Reading Memory

Card. If no MP3 tracks can be found, amessage will be displayed.

Ejecting CDs and DVDs

G WarningOnly eject a disc when the vehicle isstationary. You may otherwise be distractedfrom the traffic conditions and could cause anaccident.

i If you eject a disc while another is beingplayed, the DVD changer interruptsplayback. Playback will continue once thedisc has been ejected completely.

Ejecting One DiscX Press Eject button V.

The magazine menu appears. The magazinecompartment containing the current disc ishighlighted.

1 Magazine compartment occupied,ejecting possible

2 Disc type3 Disc name (only if stored on disc)4 Current disc

X To select occupied magazinecompartment: Press ; or =.

X Press 9.The Ejecting disc <x>... messageappears. Then you see the followingmessage:

134 CD Audio/DVD Audio/MP3Au

dio

X Remove the disc from the slot.If you do not remove the disc from the slot,the DVD changer will automatically pull itback in after a short while and beginplayback.

Ejecting All DiscsX Press the Eject V button.

The magazine menu appears.

X Select Eject All.The DVD changer ejects the first discfound. The message Ejecting disc<x>... is displayed.

X Remove the disc from the slot when yousee the message prompting you to do this.The DVD changer switches to the nextoccupied magazine compartment andejects the disc.

X Repeat the last step until the magazine isempty.

Ejecting SD Memory Card X Push the SD memory card inwards.

The SD memory card is ejected.X Remove the memory card from the slot.

CD Audio/DVD Audio/MP3 135

Audi

o

Z

Menu Overview

CD or DVD-A orMP3

Only with DVD-A:«/±/X

Track list orFolder

Media Sound

Normal tracksequence

« Pauseplayback

Display track list(CD audio/DVDaudio modeonly)

Media selectionvia media listRCD/DVD

ChangerRMemory CardRMusic

RegisterRMedia

InterfaceRAux

Treble

Random tracks ± Stopplayback

Folder list (MP3mode only)

Bass

Random folder(MP3 modeonly)

X Restart orcontinueplayback

Balance/Fader

Switches the CDdatabasereading functionon/off (CDmode only)

Surround sound

Switching to Audio CD, Audio DVD orMP3 Mode X Insert a CD/DVD (Y page 132) or an SD

memory card (Y page 134).COMAND loads the medium inserted andbegins playback.

orX Press the h function button.

i Pressing the function button switchesdirectly to the disc mode selected last (CDaudio, DVD audio, MP3-CD or DVD video).COMAND then accesses all discs in the

DVD changer, the memory card, MediaInterface or the Music Register.

X If necessary, select CD/DVD audio/ MP3media (Y page 138).

orX When playing a video DVD: Open the

media list as described in "Selecting DVDmedia" (Y page 138).

X Select an audio storage medium.This switches to the required disc mode.

136 CD Audio/DVD Audio/MP3Au

dio

From Another Main FunctionX Select Audio£Audio£Disc or MemoryCard or Music Register in the audiomenu display.

i If the desired mode is also the last activemode, you only need to select Audio.

Within the Audio FunctionX Select Audio£Disc or Memory card in

the audio menu display.

i Disc accesses audio discs in the DVDchanger, Memory Card selects the slot forthe SD memory card, Music Registerselects the Music Register, MediaInterface selects an external device..

X Select CD/audio DVD/MP3 as required(Y page 138).The desired disc mode is activated.

Example of CD Audio Mode Display

1 Disc type _2 Track number3 CD or DVD inserted4 Track name (only if stored on the disc as

CD text)5 Elapsed track time6 Visual track and time display7 Current playback option8 Sound settings9 Media selection

a Disc name (only if stored on the disc asCD text)

b Calls up track listc Storage medium position in the media listd Playback options

Example of DVD Audio Display

1 Disc type ü2 Track number3 CD or DVD inserted4 Track name (if available)5 Elapsed track time6 Visual time and track display7 Current playback option8 Sound settings9 Media selectiona Disc name (if available)b Call up track listc Stop functiond Pause functione Storage medium position in the media listK Playback options

CD Audio/DVD Audio/MP3 137

Audi

o

Z

Example display in MP3 mode

1 Disc type þ or º (memory card)2 Track number3 CD or DVD inserted4 Track name5 Elapsed track time6 Visual time and track display7 Current playback option8 Sound settings9 Media selectiona Current folderb Calls up folder listc Storage medium position in the media listd Playback options

i An example of a media list display can befound on (Y page 138).

Stop Function i This function is only available in DVD

audio mode.

X Switch to audio DVD mode.X To interrupt playback: Select ±.

The display « changes to X.X To resume playback: Select X.

Playback continues from the point where itwas interrupted.

X To stop playback: Select ± again whenplayback is interrupted.

orX Select ± twice in quick succession during

playback.Option selector remains at X.

X To restart playback: Select X.Playback starts from the beginning of theDVD.

Pause Function

In CD Audio, DVD Audio and MP3 ModeX To pause playback: Briefly press x.X appears at the top left of the status bar.

X To continue playback: Briefly pressx again.X disappears.

Only in audio DVD modeX To pause playback: Switch to audio DVD

mode.X Select «.

The « display changes to X.X To resume playback: Switch to audio DVD

mode.X Select X.

The display X changes to «.

Selecting CD/audio DVD/MP3 MediaX In CD audio, DVD audio and MP3

mode: Select Media.orX In CD audio and DVD audio mode only:

Press 9 when the main area is highlighted.The media list appears. The dot Rindicates the medium currently playing.

138 CD Audio/DVD Audio/MP3Au

dio

Media List

The media list shows the discs currentlyavailable:RIn the DVD changer (magazine

compartments 1 to 6)The following storage media can be read:_ CD audio, þ MP3-CD or MP3-DVD,ü DVD audio and ý DVD video

i If a storage medium is not readable, anentry appears next to the magazinecompartment or a message is displayedwhen the memory card is selected.RSD memory card º at position 7RMusic Register Ñ at position 8

X To select a disc: Press 9 or :.X Press 9.

i If you select a video DVD ý, then thisswitches the unit to video mode .

Selecting a Track i For many operating functions you can

also use the buttons on the multifunctionsteering wheel, e.g. the ;, =, 9or : buttons, for selecting a track, amenu or scrolling through lists(Y page 24).

Selection via Track SkipX To skip forwards or backwards to a

track: Press ; or = when the mainarea is highlighted.

orX Press the E or F button.

i “Forward track skip” skips to the nexttrack. “Backward track skip” skips to thebeginning of the current track, if the trackhas been playing for more than 8 seconds.If the track has been playing for less than8 seconds, it will skip to the beginning ofthe previous track. If the playback optionRandom Tracks is switched on, the tracksequence is random.

Selecting via Track ListX In CD audio and DVD audio mode: SelectTrack List.

orX In MP3 mode: Press 9 when the main

area window is highlighted.The track list appears. The R dot indicatesthe current track.

X To select a track: Press 9 or :.X Press 9.

i In MP3 mode, the list shows all the tracksin alphabetical order.

Fast Forward/Reverse X When the main area is highlighted:

Press and hold ; or = until thedesired position is reached when the mainarea is highlighted.

orX Press and hold the E or F button

until the desired position has beenreached.

CD Audio/DVD Audio/MP3 139

Audi

o

Z

Selecting Folders i This function is only available in MP3

mode.

X Switch to MP3 mode (Y page 136).X Select Folder.orX Press 9 when the main area is highlighted.

The folder list appears.

1 Back folder symbol2 Current track3 Track symbol4 Current folder name

X To switch to the next folder up: Selectthe Q symbol.The display changes to the next folder up(back folder).

1 Disc name (if stored on disc)2 Current folder3 Folder symbol

X To select a folder: Press 9 or :.X Press 9.

The tracks of the folder appear.X To select a track: Press 9 or :.X Press 9.

The track is played and the correspondingfolder is now the active folder.

Gracenote®Media Database i This function is only available in audio CD

mode.CD information including album title, artistname, and track name is obtained from theGracenote® Media Database. A version of theGracenote® Media Database is stored on theCOMAND’s hard drive. Access to thisdatabase is indicated by the Gracenote logobeing displayed in the lower right of someaudio displays.

Many audio CDs contain CD text. COMANDuses the information contained in this text fordisplaying the name of the artist, album andtrack.If the audio CD does not contain any CD text,COMAND can recognize unknown audiotracks in CD audio mode with the aid of theGracenote Media Database. For this tohappen, the corresponding information mustbe stored in the Gracenote Media Databaseand the “Read CD Database” function mustbe switched on.If this is the case, COMAND provides thecorresponding data, such as name of artist,album and track, in the correspondingdisplays and lists.

140 CD Audio/DVD Audio/MP3Au

dio

If COMAND accesses the Gracenote MediaDatabase while reading an audio CD, thefollowing information is displayed:

Switching "Read CD Database"Function On and OffX Switch to audio CD mode (Y page 136).X Select CD£Read CD Database.

The function is switched on Ç or offc depending on the previous state.

Updating the Gracenote®MediaDatabaseAs new music CD releases occur it isneccessary to update the Gracenote MediaDatabase. Optimum Gracenote® musicrecognition function is only achieved whenthe most up-to-date database is available inyour vehicle.You can have the music recognition softwareupdated at an Authorized Mercedes-Benzcenter by means of a DVD or perform theupdate process yourself.

i The Gracenote® Media Database isupdated at the same time as the mapsoftware (Y page 48).

Setting Audio Format It is only possible to set the audio format inDVD audio mode. The number of availableaudio formats depends on the DVD. Thecontent of an audio DVD is called the “album”,which can be divided into a maximum of ninegroups. A group may contain, for example,music of different sound qualities (stereo andmulti-channel formats) or bonus tracks. Eachgroup can include up to 99 tracks. If a DVDaudio only comprises one audio format, the“Group” menu item(s) cannot be selected.X Switch to DVD audio mode (Y page 136).X Select DVD-A£Group.

The list of available audio formats appears.The dot R indicates the format currentlyselected.

X To change setting: Press 9 or :.X Press 9.

To exit menu: Press ; or =.

Playback Options The following options are available:RNormal Track Sequence

You will hear the tracks in the normal order(e.g. track 1, 2, 3, etc.).RRandom Tracks

You will hear the tracks in random order(e.g. track 3, 8, 5, etc.).RRandom Folder (MP3 mode only)

You hear the tracks in the currently activefolder and any subfolders in random order.

X To select an option: Switch to CD audio ,DVD audio or MP3 mode (Y page 136).

X Select CD or DVD-A or MP3.The option list appears. A dot R indicatesthe option selected.

X Select an option.The option is activated. For all optionsexcept Normal Track Sequence, you willsee a corresponding display in the mainarea.

CD Audio/DVD Audio/MP3 141

Audi

o

Z

i The Normal Track Sequence option isautomatically selected when you changethe medium which is currently being playedor when you select another medium. Anactivated option remains active afterCOMAND is switched on or off.

Music Register

You can store MP3 and WMA files in the MusicRegister. The memory capacity is 4 GB.

! Keep your original music files in a safeplace. A fault with the COMAND may causethe music files stored in the Music Registerto be lost. Mercedes-Benz USA, LLC is notliable for any loss of data.

Switching to the Music Register

From Another Main FunctionX Select Audio£Audio£MusicRegister in the Audio menu display.

i If Music Register was the last mode,you only need to select Audio.

Within the Audio FunctionX Select Audio£Music Register.

Music Register is loaded. The MusicRegister display appears.

No music files available:A message will be displayed.X First copy music files to the Music Register

(Y page 142).Music files available:You will hear the first track of the first folderfound or playback will start from the pointlistened to last.

1 Storage media type — Music Register Ñ2 Track number3 CD or DVD inserted4 Track name5 Elapsed track time6 Visual time and track display7 Current playback option8 Sound settings9 Media selectiona Current folderb Folder functionsc Storage medium position in the media listd Calls up Music Register menu

Copying Music Files into the MusicRegister

i CD information, including album, title,artist name and track name is obtainedfrom the Gracenote® Media Database(Y page 140).

142 Music RegisterAu

dio

X In the Music Register submenu selectCopy Music Files.The Media List menu appears on thesubmenu.

X To select medium: Press 9 or :until desired medium is selected.

X Press 9.If the medium contains files that can becopied, a track list appears.

Selecting Files to Be Copied

Selecting All FilesX Switch the check box next to All MusicFiles on.The check boxes of All Music Files andof all files in the list are checked.

Selecting Individual FilesX Select individual files to be copied by

switching the check mark next to each fileentry on or off.

1 Copy all files (default); Option for selecting individual files= Confirm selection

i If you do not select individual files beforerecording, all filess on the CD will berecorded.

Selecting a Destination FolderX Press ; or = until DestinationFolder is highlighted.

X Press 9.

Selection list1 Create new folder (default)2 Existing folders3 Currently active folder

X To select folder: Press 9 or :.X Press 9.

i If you do not select a destination folderbefore recording, a new folder will becreated.

Music Register 143

Audi

o

Z

Start the CopyingX Press ; or = until Start is

highlighted.X Press 9.

In the display information about source,destination and progress of the recordingis shown.

i The Disc menu re-appears automaticallyafter a sucessful copying.

X To stop the copying: Press ; or= until Cancel is highlighted..

X Press 9.The Disc menu re-appears.

Deleting all Music Files This function deletes all music files fromMusic Register.X Select Music Register£Delete AllMusic Files.A prompt appears. No is highlighted.

X Do not delete: Press the 9 button.The Music Register display appears.

X To delete: Select Yes.A corresponding message appears.

Calling up Memory Space Info X Select Music Register£Memory Info.

A window appears containing informationon:RMemory capacityRAvailable memoryROccupied memoryRContent (folders, files)

Folder Functions You can view the content of Music Register,change folder or track names and deleteindividual folders or tracks.X Select Folder in the submenu.orX Press 9 when the main area is highlighted.

1 Back folder symbol2 Music file symbol3 Current folder

X To switch to the next folder up: Selectthe Q symbol.The display changes to the next folder up.

Changing Folder/File NameX Select Folder.X To select a folder/file: Press 9

or :.X Select Options£Change.

144 Music RegisterAu

dio

X Enter a name for the folder/track in theinput line.

X To save changes: Select d.

Deleting Folders/TrackX Select Folder.X To select a folder/track: Press 9

or :.X Select Options£Delete.

A query appears. No is highlighted.X Do not delete: Press the 9 button.X To delete: Select Yes and press 9.

A message appears.

Playback Options The following options are available:RNormal Track Sequence

You will hear the tracks in the normalsequence (e.g. track 1, 2, 3 etc.).RRandom Tracks:

You hear the tracks in random order.RRandom Folder

The tracks of the currently active folder andany subfolders are heard in random order.

X To select an option: Switch to MusicRegister (Y page 142).

X Select Music Register in the submenu.The option list appears. A R dot indicatesthe activated option.

X Select an option.The option is activated. A correspondingdisplay will appear in the main area for alloptions except Normal Track Sequence.

i The option Normal Track Sequence isautomatically activated if you change themedium which is currently being played orif you select another medium. An activatedoption remains active after COMAND isswitched on or off.

Media Interface

Important Notes

Connection OptionsVia the UCI connection (Universal ConsumerInterface) you can connect the followingmedia to COMAND:RiPodsRMP3 playerRUSB devices

Supported iPod VersionsThe following iPod versions are fullysupported:RiPod MiniRiPod nanoRiPod nano 4GRiPod nano 5G

Supported USB DevicesThe following USB devices are supported:RUSB sticks (flash memory)RUSB hard drives (1-inch, 1.8-inch and 2.5-

inch drives) with a starting/continuouscurrent rating of maximum 800 mA(otherwise a separate power supply will benecessary)

i The Media Interface supports USBstorage media of "USB Device Subclass 6".You can obtain information about the "USBDevice Subclass 6" from the manufacturer.

Supported Data Formats (USB devices)The following data types are supported:RMP3: CBR, VBR (up to 320 kbit/s)RWMA: CBR, VBR (up to 320 kbit/s)In order to display the metadata duringplayback, ID3 tags (version 1.x, 2.3, 2.4) andWMA tags in ASCII and UTF16 coding aresupported.

Media Interface 145

Audi

o

Z

Notes on USB DevicesRIn order to keep the initialisation time short,

do not store data other than music files onthe USB device.RUp to eight directory levels with up to 1,000

tracks are supported.RDo not use a USB extension cable or

adapter. These may impair functionality.RPlaylists are searched for in the

background on the USB device and, ifavailable, are offered beside folders in aseparate category.

i Files protected with DRM (Digital RightsManagement) are not supported by theMedia Interface.

Connecting External Devices You will find the connection sockets in theglove compartment.Never connect more than one device at atime. Please consult a Mercedes-BenzService Center for further information.

i Do not leave external devices in thevehicle, as functionality cannot beguaranteed above certain temperatures(such as inside a vehicle in direct sunlight).Mercedes-Benz does not takeresponsibility for any damage to externaldevices.

1 Connection socket for 1/8 inch jack plug,for MP3 players, for example.

2 iPod plug for connecting an iPod

3 USB socket for connecting a USB device4 Example device: iPod

X Connect the external device usingappropriate connection 1, 2 or 3.Never connect more than one device at atime. You will otherwise not be able to playback from the external device.COMAND activates the device.

If you remove a device, the No DeviceConnected message appears.

i The connected iPod or USB device shouldnot be operated with a remote control(such as a Bluetooth remote control) whileit is being operated with Media Interface,as this could cause unforeseen technicaldifficulties.

i The initialisation period may be extendedif you connect an iPod or USB device whichhas a fully discharged battery.

i Error messages appear while the deviceis being activated if:Ryou have connected two devices at the

same timeRCOMAND does not support the device

connectedRthe device connected consumes too

much powerRthe Media Interface connection is

defectiveIf necessary, consult a Mercedes-BenzService Center.

Switching to Media Interface

From Another Main FunctionX Select Audio£Audio£MediaInterface in the audio menu display.

i If you previously selected operation withMedia Interface, you need only selectAudio.

or

146 Media InterfaceAu

dio

X Press the h function button.Switch on the previous disc operatingmode.

i If you previously selected operation withMedia Interface, it will now be switched on.

X Press number key i.This will automatically select the audiodevice connected.

orX Select Media.

The media list appears. The R dotindicates the current medium being played.

X Press 9 or : until position 0 ishighlighted in the media list.

i If no device is connected, you will see theentry Media Interface instead of adevice name.If COMAND does not support the deviceconnected or if two devices have beenconnected, the Not available entryappears.

X Press 9.COMAND activates the connected device.You will see a corresponding message. Thebasic display then appears.

Example display: iPod operation1 Device type2 Track number3 Track name4 Visual elapsed track time5 Numeric elapsed track time (also in

format 00:00:00 for audiobooks)

6 Visual track display7 Current playback option8 Sound settings9 Media lista Album name, if availableb Categories, playlists and/or foldersc Artist, if availabled Playback options

i If the device connected does not containany playable tracks, a correspondingmessage appears.

Within the Audio FunctionX Connect an external device (Y page 146).

COMAND activates the device. The basicdisplay appears.

orX Press number key x.orX Select Audio£Media Interface.

i You can tell which type of device 1 hasbeen connected by the correspondingicons for iPod, MP3 player or USB massstorage device.

Selecting Music Files i COMAND displays the data stored on the

iPod, MP3 player or USB mass storagedevice in the storage structure used in themedium in question.

Selecting by Skipping to a TrackX To skip forwards or backwards to a

track: Press ; or =.orX Press the F or E button.

i Skipping forwards skips to the next track.Skipping backwards skips to the beginningof the current track if the track has beenplaying for more than 8 seconds. If the

Media Interface 147

Audi

o

Z

track has been playing for less than 8seconds, it skips to the start of the previoustrack. If you have selected a playbackoption other than Normal TrackSequence, the track sequence is random.

Selecting by Manual Track NumberEntryX To make an entry: Press the U button.

An input menu appears. The number ofpossible input places depends on thenumber of tracks stored.

X To enter a track number: Press a numberkey, such as s.The number is entered in the first positionin the input line.

i If an invalid number is entered, COMANDwill ignore it and it will not be displayed.

X Enter more numbers if desired.X To confirm your entry: Press the 9

button.The selected track is played.

Fast forward/rewindX When the main area is highlighted, press

and hold ; or = until the desiredposition has been reached.

orX Press and hold the F or E button

until the desired position has beenreached.

Selecting a Category/Playlist/Folder

iPods and MP3 PlayersYou can select tracks for iPod and MP3players with categories and folders.Depending on the connected device, thecategories may include:

RCurrent track listRPlaylists (e.g. All, My top 25 or Musicvideos)RArtistsRAlbumsRPodcastsRAudiobooksRGenresRComposers

i Some playback categories contain theAll entry. Further entries of this type canfollow depending on the hierarchy level.After selecting a title at the track level, theentire content of the category selected willbe played.

USB DevicesFor USB mass storage devices, you can selectfolders and also playlists (if available).COMAND can also display the album nameand artist ("metadata") during playback, if thisinformation was previously entered into thesystem.Playlists are shown in the display with aparticular icon. When you open the playlist,the corresponding tracks are opened andplayback begins. Now Random Categoriesis available as a playback option instead ofRandom Folder.For USB mass storage devices, you candetermine whether metadata from the tags inthe coded music data should be displayed orwhether the file name and directory should bedisplayed during playback.X Select Media Interface £DisplayMetadata.

148 Media InterfaceAu

dio

Selecting a Category and Opening aFolderX To open a category list/folder: Press9 when the main area is highlighted.

orX Select Music.

You will see the available categories or thefolder content (e.g. other folders). Thecategory selected or the folder name is inthe status bar of the display.

i The Music menu item is not available untilthe device has been activated.

1 Device name and device icon2 Selectable categories

X To select a category/folder: Press 9or : and confirm with 9.You will see the content of the selectedcategory or selected folder.

i You may see the Please wait...message beforehand.

X If necessary, repeat this operating stepuntil the tracks in the desired folder appear.

1 Symbol for back folder2 Current category3 Track icon4 Current track

X To select a track: Press 9 or : andconfirm with 9.The track is played.

orX Select an album or folder and confirm this

by holding down 9.You see the Please wait... message.The track list then appears.

X To select a track: Press 9 or : andconfirm with 9.After that, the first track of the album/folder is played.

X To switch to the next folder up: Selectthe Q icon.

i The Q icon is always listed right at thetop of the folder in question.

Playing the Content of a Category orFolderX Select a category or folder.X Press 9 for longer than two seconds.

The content of the category or folderselected is played in accordance with theplayback option (Y page 150) selected.

Media Interface 149

Audi

o

Z

Alphabetical Track Selection

iPods and MP3 Playersi This function is available for categories

which are arranged in alphabetical order.This function is not available for playlists,for example.

X Select a category, e.g. artists.The available artists appear.

X Press the corresponding number key onceor repeatedly to select the initial letter ofthe desired artist. For example, to select anartist whose name begins with C, press thenumber key l three times.You see the available letters at the bottomedge of the display.After a message, the first entry in the listwhich matches the letter entered ishighlighted.

i If there is no entry which matches theletter which has been entered, the lastentry in the list which matches a previousletter is highlighted.

USB Devicesi This function is available for directories

which are arranged in alphabetical order.This function is not available for playlists.

X Press the number key in question once orrepeatedly in a directory to select the initialletter of the desired artist.For example, to select an artist whosename begins with C, press the number keyl three times.You see the available letters at the bottomedge of the display.If the directory only contains folders,COMAND searches for folders. The firstentry in the list that matches the letter ishighlighted.If this does not happen, COMAND searchesfor tracks. After a message, the first entry

in the list which matches the letter enteredis highlighted.

Selecting the Active Partition (USBDevices Only)

You can select this function for USB deviceswhen the storage device is partitioned. Up tofour partitions (primary or logical and FAT-formatted) are supported.

i The Windows formatting programsupports FAT partitions with either FAT16or FAT32.

X Select Media Interface£Activepartition.

Playback Options The following options are available to you:RNormal Track Sequence:

You hear the tracks in their normal order(numerical or alphabetical).RRandom Tracks:

You hear all tracks in random order.RRandom Categories or Random Folder

(in the case of USB devices when Folderhas been selected):You hear the tracks in the current activecategory or folder and any subfolders inrandom order.

X To select an option: Select MediaInterface in the basic display.The option list appears. A R dot indicatesthe option selected.

X Select an option.

150 Media InterfaceAu

dio

Audio Aux

An external audio source (Aux) can beconnected to COMAND via the 1/8 inch jack1 located inside the glovebox.

Switching to Audio Aux Mode

From Another Main FunctionX Select Audio£Audio£Aux in the audio

menu display.

i If the last mode was audio AUX mode, youonly need to select Audio.

Within the Audio FunctionX Select Audio£Aux.

The Audio Aux menu appears. The mediumin the external audio source is heard,provided it is connected and switched toplayback.

i Please see the corresponding operatinginstructions for how to operate the externalaudio source.

You can set the following in audio Aux mode:RVolume (Y page 32)RBalance and fader (Y page 33)RTreble and bass (Y page 32)RSurround sound (Y page 33)

G WarningDue to the different volumes of the externalaudio sources, system messages (e.g.navigation announcements) may be muchlouder. You may need to disable these systemmessages or adjust the volume of thesemessages manually.

i The volume of external audio sources isextremely variable. It is possible that adevice connected as an external audiosource will sound quieter or louder in thevehicle or that the usual maximum volumecannot be achieved. On certain devices thevolume can be set separately. In this case,start at a moderate volume and increase itslowly. In this way, you can determinewhether the system is capable of playbackwithout distortion, even at high volume.

Audio Aux 151

Audi

o

Z

152

General Information ......................... 154Submenu Overview .......................... 156DVD Video .......................................... 156Video Aux .......................................... 161

153

Vide

o

General Information

Safety Instructions

G WarningCOMAND is classified as a Class 1 laserproduct. You must not open the casing. Thereis a risk of exposure to invisible laser radiationif you open the casing, or if the casing is faultyor damaged.COMAND does not contain any parts that youare able to maintain yourself. For safetyreasons, all maintenance work must beexclusively carried out by qualifiedtechnicians.

G WarningOnly carry out the following when the vehicleis stationary:RInserting a discREjecting a disc

There is a risk of accident by being distractedfrom road and traffic conditions if you load aCD/DVD while the vehicle is in motion.

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Automatic Picture Switch-off If the vehicle is traveling faster thanapproximately 3 MPH, the picture will switchoff automatically in DVD video mode.The following message appears in the display:In order not to distract you from thetraffic situation, the picture isfaded out while the vehicle is inmotion.

As soon as the vehicle speed drops belowapproximately 3 MPH, the picture switchesback on again.

Notes on Storage Media i When playing copied discs, problems may

occur with the playback. A wide variety ofdisc-writing software and writers areavailable. Due to this variety we cannotguarantee that the system will be able toplay discs that you have written/copiedyourself.

! Do not affix stickers or labels to the discs,as they could peel off and damageCOMAND. Stickers can cause the disc tobend, which can result in read errors anddisc recognition problems.

! COMAND is designed to hold discs whichcomply with the EN 60908 standard. Youcan therefore only use discs with amaximum thickness of 1.3 mm.If you insert thicker discs, e.g. those thatcontain data on both sides (DVD on oneside and audio data on the other), theycannot be ejected and can damageCOMAND.Do not use discs with a diameter of 8 cm,even with an adapter. Only use round discswith a diameter of 12 cm.

Notes on the Care of Discs ROnly hold discs by the edge.RHandle discs with care in order to prevent

malfunctions during playback.RAvoid scratching, leaving fingerprints and

dust on the discs.RClean the discs occasionally with a

commercially available cleaning cloth.Always wipe in a straight line from theinside outwards, never in a circular motion.

154 General InformationVi

deo

RThe discs must only be labelled using pensspecially designed for this purpose.RAfter use, replace the discs into the sleeve.RProtect the discs from heat and direct

sunlight.

DVD Playback ConditionsSome DVDs may not comply with the NTSCor PAL TV playback standards. Sound, pictureand other playback problems may occurwhen you play such DVDs.As standard, COMAND can play video DVDswhich meet the following criteria:RRegion code 1 or region code 0 (no region

code)

i With a video DVD having another regioncode, a corresponding message will bedisplayed.RPAL or NTSC TV standardInformation on this can usually be foundeither on the DVD itself or on the DVD sleeve.

i The factory setting for COMAND is regioncode 1. An authorized Mercedes-BenzCenter can change this setting. This will

enable you to play video DVDs with otherregion codes, provided that they have beenmade to the PAL or NTSC TV standard.

Functional Restrictions It may be the case that some functions oractions may not be possible at certain times,or may not be possible in general, dependingon the DVD.When you activate such functions or actions,this is indicated by the 7 in the display.

Loading a DVDX Proceed as described in the "Loading CDs

and DVDs" section (Y page 132).

Ejecting a DVDX Proceed as described in the "Ejecting CDs

and DVDs" section (Y page 134).

General Information 155

Vide

o

Z

Submenu Overview

DVD-Video «/X ± Media Sound

DVD functions « Pausesplayback

± Stopsplayback

Mediumselection

Treble

Brightness X Resumesplayback

Bass

Contrast X Restartsplayback

Balance/Fader

Color Surround sound

16:9 Optimized

4:3

Widescreen

DVD Video

Switching to DVD Video

From the Control PanelX Load DVD video (Y page 132).

COMAND loads the medium inserted andstarts playing it.

orX From another main function: Press theh function button.The function button takes you directly tothe last active disc mode (audio CD, audioDVD, MP3 CD, media interface or videoDVD). COMAND accesses all discs in theDVD changer.If you previously selected video DVD mode,it will now be switched on.If you have another disc mode activated:

X Select Media.The media list appears.

X Select a video DVD (Y page 157).

Displaying/Hiding Control Menu X To display: Press 9 or :.

X To hide: Press 9 or :.orX Wait approximately eight seconds.

Control menu displayed1 Disc type2 Current track3 Current scene4 Elapsed track time5 Displays menu system

156 DVD VideoVi

deo

Displaying/Hiding Menu System X To show: Press 9.orX When the control menu is shown, selectMenu.

X To hide: Press 9 and select Fullscreen.

Menu system displayed1 Video DVD Video menu2 Pause function3 Stop function4 Media selection5 Sound settings

Fast Forward or Rewind X Press ; or = until the desired

position is reached.orX Press and hold E or F in the control

panel until the desired position has beenreached.You see the control menu.

Selecting DVD Media X In DVD video mode, if necessary display the

menu system (Y page 157).X Select Media.

The media list appears. The R dotindicates the current medium being played.

Media list1 Symbol for DVD video2 Video DVD currently playing

X To select video ý: Press 9or :.

X Press 9.COMAND switches the medium.

i If you select a CD-/DVD-audio or MP3medium, the system switches to thecorresponding audio mode (Y page 138).

Stop Function X In video DVD mode, display the menu

system if necessary (Y page 157).X To interrupt playback: Select ±.

The display « changes to X.X To resume playback: Select X.

Playback continues from the point where itwas interrupted. The menu system ishidden.

X To stop playback: Select ± again whileplayback is interrupted.

orX Select ± twice in quick succession during

playback.Selection is at X.

X To restart playback: Select X.Playback restarts from the beginning. Themenu system is hidden.

DVD Video 157

Vide

o

Z

Pause Function X In video DVD mode, display the menu

system if necessary (Y page 157).X To pause playback: Select «.

The display « changes to X.X To resume playback: Select X.

The menu system is hidden.

Selecting a Scene/Chapter X To skip forwards or backwards:

Press ; or =.or

X Press the E or F button on thecontrol panel.The control menu (Y page 156) appears forapproximately 8 seconds.

Selecting a Film/Track i This function is only available if the DVD

is divided into several films/tracks.

X Display the menu system if necessary(Y page 157).

X Select DVD-V£DVD Functions.A menu appears.

DVD function menu

X Press ; or = until TitleSelection is selected.

X To open selection list: Press 9.X Select a film/track.

Picture Settings

Adjusting the Brightness, Contrast orColorX Display the menu system if necessary

(Y page 157).X Select DVD-V £ Brightness, Contrast

or Color.X To change the setting: Press 9

or : until the desired setting is reached.X To save the setting: Press 9.

Changing the Picture FormatX Display the menu system if necessary

(Y page 157).X Select DVD-V.

The DVD-V menu appears. The filled-inoption button in front of one of these menuitems: 16:9 Optimized, 4:3 orWidescreen indicates the format currentlyselected.

X To change the format: Press 9or : until the desired format is selected.

X To save the setting: Press 9.

DVD Menu i The DVD menu is the menu stored on the

DVD itself. It is structured in various waysaccording to the individual DVD andpermits certain actions and settings.

158 DVD VideoVi

deo

Opening the DVD MenuX In DVD video mode, if necessary display the

menu system (Y page 157).X Select DVD-V£DVD Functions£Menu.The DVD menu appears.

Selecting Menu Items in the DVD MenuX Press 9, :, ; or =.X To confirm your selection: Press 9.

The selection menu appears.

i Menu items which cannot be selected aregreyed out.

X To confirm selection: Select Select.COMAND will perform the action ordisplays a submenu represented by themenu item selected in the DVD menu. Ifnecessary select from further options in thesame way.COMAND then switches back to the DVDmenu.

i Depending on the DVD, it is possible themenu item Play either has no function orno function in certain parts of the DVDmenu. This is indicated by the 7 symbolon the display.

or

X In DVD video mode, if necessary display thecontrol menu (Y page 157).

X Select Menu£DVD Video£DVDFunctions

X Select a directional arrow to navigate theDVD menu.

DVD menu

Stopping Film or Skipping to theBeginning or End of a SceneX Select any menu item from the DVD menu.

The selection menu appears.X To stop a film: Select Stop from the menu.X To skip to the end of a scene: SelectÔ from the menu.

X To skip to the beginning of a scene:Select Ó from the menu.

i Depending on the DVD, the Ó andÔ menu items may not function at all ormay not function at certain points in theDVD menu. You will see the 7 symbol inthe display as an indicator.

Moving up one Level in the DVD MenuX Press the % button.

orX Select the corresponding menu item in the

DVD menu.or

X Select any menu item from the DVD menu.X Select Go Up from the selection menu.

DVD Video 159

Vide

o

Z

i Depending on the DVD, the Play menuitem may not function at all or may notfunction at certain points in the DVD menu.You will see the 7 symbol in the displayas an indicator.

Back to the MovieX Press the % button repeatedly until you

see the film.or

X Select the corresponding menu item in theDVD menu.

X Select the Back (to movie) menu itemfrom the selection menu.

i Depending on the DVD, the Back (tomovie) menu item may not function ingeneral or may not function at certainpoints in the DVD menu.

Setting the Language and AudioFormat

i This function is not available on all DVDs.Where available, you can set the DVD menulanguage and the audio language or audioformat. The number of possible settings isdependent on the DVD content. It ispossible that the settings may also beaccessed in the DVD menu (Y page 158).

X Display the menu system if necessary(Y page 157).

X Select DVD-V£DVD Functions.X Select Menu Language or AudioLanguage.Both of these will bring up a selection menuafter a few seconds. The R dot in front ofan entry indicates the currently selectedlanguage.

X To change the setting: Press 9or : until the desired setting is reached.

X To save the setting: Press 9.

Subtitles and Camera Angle i These functions are not available on all

DVDs. The number of subtitle languagesand camera angles available depends onthe content of the DVD. It is possible thatthe settings may also be accessed in theDVD menu (Y page 158).

X Display the menu system if necessary(Y page 157).

X Select DVD-V £ DVD Functions.X Select Subtitles or Camera Angle.

Both of these will bring up a selectionmenu. The R dot in front of an entryindicates the current setting.

X To change the setting: Press 9or : until the desired setting is reached.

X To save the setting: Press 9.

Interactive Content DVDs may have interactive content (e.g. avideo game).In a video game, for example, you can controlthe play by selecting or triggering actions. Thetype and number of actions is dependent onthe DVD.X To select an action: Press 9 or :.X To trigger an action: Press 9.

A menu appears and the first entry,Select, is highlighted.

X Press 9.orX In DVD video mode, if necessary display the

control menu (Y page 157).X Select Menu£DVD-Video£DVDFunctions.

X Select a directional arrow to select ortrigger an action.

160 DVD VideoVi

deo

The way you can control the actions dependson the DVD.

Video Aux

Aux ConnectorsAn external video source (Video AUX) can beconnected to COMAND via the MediaInterface (Y page 146) 1/8 inch jack locatedinside the glovebox.

Switching to Video Aux

From Another Main FunctionX Select Video£Video£Video Aux

i If Video Aux mode was active last, youonly need to select Video.

Within the Video FunctionX Select Video£Video Aux

The Video Aux menu appears. The mediumin the external video source is played,provided it is connected and switched toplayback.

i Please refer to the relevant operatingguide for operation of the external videosource.

Video Aux SettingsThe following settings can be made in VideoAux mode:RVolume (Y page 32)RBalance and fader (Y page 33)RTreble and bass (Y page 32)RSurround sound (Y page 33)RPicture (Y page 158)

G WarningDue to the different volumes of the externalaudio sources, system messages (e.g.navigation announcements) may be muchlouder. You may need to disable these systemmessages or adjust the volume of thesemessages manually.

i The volume of external audio sources isextremely variable. It is possible that adevice connected as an external audiosource will sound quieter or louder in thevehicle or that the usual maximum volumecannot be achieved. On certain devices thevolume can be set separately. In this case,start at a moderate volume and increase itslowly. In this way, you can determinewhether the system is capable of playbackwithout distortion, even at high volume.

Video Aux 161

Vide

o

Z

162

General Information ......................... 164Basic Functions ................................. 169System Settings ................................ 170CD/DVD Audio and MP3 Operation . 171DVD Video Operation ........................ 175Aux Operation ................................... 180

163

Rear

Sea

t Ent

erta

inm

ent

General Information

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

OverviewThis chapter describes the RSE (Rear SeatEntertainment) system:RBasic functions (Y page 169)RSystem settings (Y page 170)RCD/DVD audio and MP3 operationRDVD Video operation (Y page 175)RAUX operation (Y page 180)

Safety Instructions

G WarningThe RSE CD/DVD player is a Class 1 laserproduct. There is a danger of invisible laserradiation when you open or damage the cover.Do not remove the cover. The RSE CD/DVDplayer does not contain any parts which canbe serviced by the user. For safety reasons,have any necessary service work performedby qualified personnel.

G WarningThe driver should not wear a Rear SeatEntertainment headset while operating the

vehicle under any circumstances. The use ofa headset while driving the vehicle coulddrastically impair the ability to react to audibletraffic conditions (e.g. emergency sirens frompolice/fire/ambulance, another car’s horn,etc.).

G WarningWhen not in use, headsets or external videosources should be stored in a safe location(e.g. one of the vehicle’s storagecompartments) so that they are not loosewithin the passenger compartment duringbraking, vehicle maneuvers or a trafficaccident. Objects moving within thepassenger compartment could cause seriouspersonal injury to vehicle occupants.

G WarningDue to a potential choking hazard, wiredheadset usage by children should only occurwith adult supervision.

Rear Seat Entertainment ComponentsThe rear-seat entertainment system consistsof:Rtwo display screens behind the head rests

of front-seatsRa remote controlRa CD/DVD driveRAux connectors on the drive and display

screens for connecting external devicesRtwo wireless headsets

164 General InformationRe

ar S

eat E

nter

tain

men

t

Display Screens

: Connector for wired headset; Aux connectors= Display? Infra-red sensors

Remote Control

: Switching the display screen on or off; Switching on/off the key illumination= Selecting the display screen (left/right)? Selecting menu item or menu (arrows)A Confirming selection (OK)B Muting the playback

General Information 165

Rear

Sea

t Ent

erta

inm

ent

Z

C Setting the Volume (wired headset)D Skipping tracks forward/backwardE Selecting a title directlyF Leaving a menu

Selecting the Active Display Screen forthe Remote ControlWith the remote control you can select whichof the two display screens is responsive to theremote control.X Selecting the left/right display screen:

Rotate the wheel = until L or R appears inthe small window.

Switching On/Off the Display Screeni If the ignition key is in position 0 or 1 (Y

vehicle operating guide) or the key is notinserted, the display screens are switchedoff automatically after 30 minutes. Beforeswitching off a corresponding messageappears.You can switch on the screen(s) again butbe aware it will continue to discharge thevehicle battery.

X Point the remote control to the activescreen and press the button On/Off : onthe remote control.The display screen is switched on or off.

i Switching on with the remote control isonly possible if the ignition is on.

Muting the Audio Playback (Only WiredHeadset)X Press the button B on the remote control.

Depending on the previous state the soundis switched on or off.

Selecting a Menu Item and Confirming theSelectionX Selecting the menu item: Press the arrow

buttons ? on the remote control.X Confirming the selection: Press the OK

button A.

CD/DVD Drive and Aux ConnectorsThe CD/DVD drive is located in centralposition behind the front seats.

: CD/DVD slot; Aux, right (R) connector for audio signal= Aux, left (L) connector for audio signal? Aux, connector for video signal (V)A CD/DVD eject button

The Aux connectors shown here representthe source Disk Drive Aux. The sameconnectors are available at the displayscreens. These represent the Aux sourceDisplay Aux (Y page 180).

166 General InformationRe

ar S

eat E

nter

tain

men

t

Wireless Headsets

: Setting the volume; Selecting the display screen= Battery compartment? Switching headset on/offA State Indicator LED

X Adapt the fit of the headset by pulling theheadset clamp as indicated by the arrowsin the figure above.

Switching ON/Off the Wireless HeadsetX Press button ?.

Depending on the previous state theheadset is switched on or off. In order topreserve battery charge, the headset isswitched off if there is no IR signalreception for appr. 3 minutes.

Setting the Wireless Headset VolumeX Turn the Thumb wheel : to set the desired

volume.

i If you have connected a wired headset toa display screen, you can set the volumewith the button : of the remote control(Y page 165).

Selecting the Display Screen for theHeadsetX Rotate the wheel = until L or R appears in

the small window.

State Indicator LEDThe color of the LED indicates:Rif the headset is switch on or offRthe battery condition

Color State

Green Headset is switched on and thebatteries are full.

Dark Headset is switched off or thebatteries are empty or notinserted.

Red Headset is switched on and thebatteries are almost empty.

Connecting Additional HeadsetsYou can connect wired headsets to both ofthe display screens. The socket is suitable forheadsets with 1/8“ stereo jacks and 32 Ohmimpedance (Y page 165).

Replacing the Batteries You need batteries for the remote control andthe wireless headset.

G WarningKeep batteries out of the reach of children.Immediately seek medical help if a childswallows a battery. Batteries are not to beshort-circuited, dismantled or thrown intofire.

General Information 167

Rear

Sea

t Ent

erta

inm

ent

Z

H Environmental NoteBatteries contain materials that can harm theenvironment if disposed of improperly.Recycling of batteries is the preferred methodof disposal. Many states require sellers ofbatteries to accept old batteries for recycling.

Remote Control Batteries

The remote control contains two batteries ofsize AAA, 1.5 V.X Remove the cover of the battery

compartment 3 on the back of the remotecontrol by pressing down the snap-fit hook2.

X Take out the empty batteries 5.X Insert the new batteries. Mind the polarity

marks on the batteries.Battery on the left:The plus terminal (+) must face upwards.

Battery on the right:The plus terminal (+) must face downwards.

X Put the cover with the engagementhooks ? first onto the batterycompartment and let the snap-fit hook 2snap in.

Wireless Headset BatteriesThe battery compartment cover is located onthe left headphone.

1 Battery compartment coverThe wireless headset contains two batteriesof size AAA, 1.5 V.X Open battery compartment cover : by

folding it up. When doing so, hold the leftheadphone as shown in the illustration toprevent the inserted batteries from fallingout.

X Take out the empty batteries.X Insert the new batteries. Mind the polarity

marks on the batteries.Battery on the left:The plus terminal (+) must face upwards.Battery on the right:The plus terminal (+) must face downwards.

X Close the battery compartment.The state indicator LED lights green whenyou switch on the headset and the batterieswere inserted correctly.

168 General InformationRe

ar S

eat E

nter

tain

men

t

Basic Functions

The following operating modes are availablefor the rear-seat entertainment system:RCD/DVD audio and MP3 mode

(Y page 171)RDVD Video operation (Y page 175)RAUX mode (Y page 180)

In Aux mode you can play external videosources that are connected either to thedisplay screens or to the CD/DVD drive. Inaddition you can play the active audio orvideo source of COMAND (Y page 180).

With the system settings menu you can setdisplay design and language for each screenseparately (Y page 170).

Headset Operation You can use the provided wireless headsetand/or two wired headsets connected to thedisplay screens (Y page 167).X Switch on the wireless headset

(Y page 167).X Set the volume of the headset

(Y page 167).X Select the display screen for the headset

(Y page 167).

Main Loudspeaker Operationi This function is available in connection

with COMAND.The sound of a medium which is played in theRSE disc drive can also be heard over thevehicle loudspeakers. For this, at least on oneof the display screens the operating modeDisc has to be active.X Switching to Audio menu: Select Audio£ Audio in COMAND.

X Select Rear.

The volume control of the headsets has noimpact on the volume of the loudspeakers.

Setting Treble and Bass X Switch to the menu of the respective

operating modeRCD Audio (Y page 172)RDVD Audio (Y page 172)RMP3 (Y page 172)RDVD Video (Y page 175)RAux (Y page 180).

X Select Treble or Bass.A setting scale appears.

X To change the value: Press ∆ or ∇ buttonon the remote control.

X To confirm the setting: Press the 9button on the remote control.

Multiuser Operation The two display screens can be operatedalmost entirely independent from each other.For some menus, however, there can ariseconflicts if the two display screens are usedsimultaneously.

Simultaneous Use of the Rear-Compartment Disk DriveIf on both display screens the disc drive isused, the selection of certain settings on onescreen will have an impact on the otherscreen as well.The following functions affect both screens:RChanging the playback optionsRSelecting a track (from track list or folder)RUsing the Play, Stop or Pause function.RUsing the fast forward/rewind functionRSwitching to DVD menu and and navigating

through it

Basic Functions 169

Rear

Sea

t Ent

erta

inm

ent

Z

RSetting language, subtitle and cameraangleRCalling up interactive DVD contentThe following functions affect only onescreen:RChanging Audio, Video or screen settingsRSwitching between full screen and menu

system.

Switching Operating ModesWhen you leave an operation mode, e.g. CDaudio, its current settings are stored. If youcall up this operation mode later, there aretwo possibilities:RThe operation mode settings have been

changed on the other display screen.RThe operation mode settings have not been

changed.In the first case the operation mode settingswill be as they are on the other display screen.In the second case the settings remain asthey were before you left the operation mode.

Functional Restrictions in DVD VideoMode

Some functions may temporarily orpermantly not be available. If you use suchfunctions, you will see the symbol 7.

System Settings

All system settings can be set for each displayscreen independently.

Calling up the System MenuX Select System in the main function line.

The system menu appears on the selecteddisplay screen.

Selecting the Display Language X Select System Settings £ Language .

The list of languages appears. A R dotindicates the current setting.

X To change the setting: Select anotherlanguage with the button ∆ or ∇ on theremote control.

X Press the 9 button.The rear-seat entertainment systemactivates the selected language.

Switching the Display Design X Select System settings.X Select Day Mode, Night Mode orAutomatic.The ä icon indicates the current setting.

X Use the ∆ or ∇ button to select a setting.RDay Mode

The display remains set to day design.RNight Mode

The display remains set to night design.RAutomatic

The display automatically switchesdepending on the instrument clusterlighting.

X Press the 9 button on the remote control.

170 System SettingsRe

ar S

eat E

nter

tain

men

t

Adjusting the Brightness X Select System settings £Brightness.A scale appears.

X To set the brightness: Press the ∆ or ∇button.The brightness bar moves up or down. Theimage dims or brightens according to thebar position on the scale.

X To confirm the setting: Press the 9button on the remote control.

Switching the Display Screen On/ Off

Switching Off the DisplayX Select Display off from the system

menu.

Switching On the DisplayX Press the 9 button on the remote control.

CD/DVD Audio and MP3 Operation

Safety Instructions

G WarningThe RSE CD/DVD player is a Class 1 laserproduct. There is a danger of invisible laserradiation when you open or damage the cover.Do not remove the cover. The RSE CD/DVDplayer does not contain any parts which canbe serviced by the user. For safety reasons,have any necessary service work performedby qualified personnel.

Notes on CDs/DVDsPlease refer to the chapter ”Audio” forgeneral information about CD/DVD disks andon the MP3 format (Y page 132) and(Y page 130).

Inserting a Disk i The CD/DVD drive is located in central

position behind the front seats.

1 CD/DVD slot2 Eject buttonThe drive takes one medium at a time. If thereis already a medium loaded, you must firsteject it.X Insert a disk into the slot with the printed

side upwards.If the medium has no printed side, the sideyou want to play has to face downwards.The drive pulls the disk in.

The CD/DVD drive plays the diskRif it has been inserted properly andRafter you have switched to disk operation

(Y page 172).The data of a MP3 disk must be first loadedfrom the drive. This takes some timedepending on the number of folders and files.

CD/DVD Audio and MP3 Operation 171

Rear

Sea

t Ent

erta

inm

ent

Z

Ejecting a Disk X Press Eject button 8.

The drive ejects the disk.X Take the disk out of the slot.

If you do not take the disk out of the slot,the drive will pull it in again automaticallyafter a short while.

Switching to CD Audio DVD Audio orMP3 Operation X Insert a disk (Y page 171).X Select Disc with the h button on the

remote control.The corresponding mode is activated. Therear-seat entertainment system plays thedisk.

Example Display of CD Audio Operation

1 Disc type _2 Track number3 Track name (only if stored on the disk as

CD text)4 Elapsed track time5 Visual time and track display6 Current playback settings (no icon for

"Normal track sequence")7 Bass setting8 Treble setting9 Disk name (only if stored on the disk as

CD text)

a Track listb Playback options

Example Display of DVD AudioOperation

1 Disc type ü2 Track number3 Elapsed track time4 Visual time and track display5 Current playback option (no icon for

"Normal track sequence")6 Bass setting7 Treble setting8 Track list9 Stop functiona Pause functionb Playback options

Example Display of MP3 Operation

1 Disc type þ2 Track number3 Track name

172 CD/DVD Audio and MP3 OperationRe

ar S

eat E

nter

tain

men

t

4 Elapsed track time5 Visual time and track display6 Current playback option (no icon for

"Normal track sequence")7 Bass setting8 Treble setting9 Current folder or medium namea Folder listb Playback options

i For MP3 titles with variable bitrate thedisplay of the elapsed track time may notbe correct.

Selecting a Track

Selecting by Skipping to a TrackX To skip forwards or back to a track:

Press \ or Y on the remote control.orX Press E or F button on the remote

control.‘Forward track skip’ skips to the next track.‘Backward track skip’ skips to thebeginning of the current track, if the trackhas been playing for more than 8 seconds.If the track has been playing for less than8 seconds, it will skip to the beginning ofthe previous track.

Selecting via Track ListX In CD audio/DVD audio mode: SelectTrack list.

orX In MP3 mode: Press the 9 button when

the main area is highlighted.The track list appears. The R dot indicatesthe current track.

X To select a track: Press ∆ or ∇ on theremote control.

X Press 9 on the remote control.

Selecting a Track by Directly Enteringits NumberX Press button h.

The track entry display appears.Example: track 2X Press the number button 2.Example: track 12X Press the corresponding number keys in

rapid succession.

i It is not possible to enter numbers thatexceed the number of tracks on the CD orin the currently active folder.

X Wait for approximately 3 seconds aftermaking an entry.You will hear the entered track. Thecorresponding basic menu then reappears.

Fast Forward/Rewind X Main area is active: Press and hold the\ or Y button on the remote control untilyou have reached the desired position.

orX Press and hold the E or F on the

remote control until you have reached thedesired position.

Selecting a Folder i This function is only available in MP3

mode.

X Select Folder in MP3 mode.orX Press the 9 button when when the main

area is highlighted.The content of the folder is displayed.

CD/DVD Audio and MP3 Operation 173

Rear

Sea

t Ent

erta

inm

ent

Z

1 Back folder symbol2 Current folder name3 Track icon

X To switch to the next folder up: Selecticon U.The display shows the next folder up.

1 Back folder symbol2 Folder symbol

X To select a folder: Select the desiredfolder.You will see the tracks in the folder.

X To select a track: Press ∆ or ∇ on theremote control.

X Press 9 on the remote control..The track is played and the correspondingfolder is now the active folder.

Pause function i This function is only available in audio

DVD mode.

X To pause playback: Select «.The display « changes to X.

X To resume playback: Select X.The display X changes to «.

Stop function i This function is only available in audio

DVD mode.

X To interrupt playback: Select ±.The playback stops and jumps to thebeginning of the DVD.

X To resume playback: Select X.The playback continues from the positionwhere it was stopped.

Setting the Audio Format It is only possible to set the audio format inDVD audio mode. The number of availableaudio formats is dependent on the DVD. Thecontent of an audio DVD is called the ‘album’,which can be divided into a maximum of ninegroups. A group may contain, for example,music of different sound qualities (stereo andmulti-channel formats) or bonus tracks. Eachgroup can include up to 99 tracks. If a DVDaudio only comprises one audio format, the“Group” menu item(s) cannot be selected.X Select DVD-A £Group.

The list of available audio formats appears.The R dot indicates the format currentlyselected.

X To change a setting: Press ∆ or ∇ on theremote control.

174 CD/DVD Audio and MP3 OperationRe

ar S

eat E

nter

tain

men

t

X Press 9 on the remote control.X To exit the menu: Press \ or Y on the

remote control.

Playback options The following options are available:RNormal Track Sequence

You will hear the tracks in the normalsequence (e.g. track 1, 2, 3 etc.).RRandom Tracks:

You will hear the tracks in random order(e.g. track 3, 8, 5 etc.).RRandom Folder (MP3 mode only)

The tracks in the currently active folder andany subfolders are heard in random order.

X To select an option: Switch to CD or DVD-A or MP3 mode (Y page 172).

X Select CD or DVD-A or MP3.The option list appears. A R dot indicatesthe option currently selected.

X Select an option.The option is switched on. All optionsexcept Normal Track Sequence will beindicated in the main area.

i If you change the disk, the Normal TrackSequence option is activatedautomatically. If an option is selected, itremains selected after the rear-seatentertainment system is switched on or off.

Switching Track Information On/Off(MP3 Mode Only)

If this function is switched on, folder and tracknames are displayed.If this function is switched off, disk and filename are displayed.X Select Display Track Information.

The function is switched on Ç or offc depending on the previous status.

DVD Video Operation

Please refer to the chapter ”Audio” forgeneral information about CD/DVD disks(Y page 132)and on the MP3 format(Y page 130).For Safety Instructions refer to section “CD/DVD Audio and MP3 Operation” .For special notes on DVDs and DVD playbackconditions refer to chapter “Video”(Y page 156).

Functional RestrictionsDepending on the DVD, it is possible thatcertain functions or actions described in thissection will be temporarily blocked or may notfunction at all. As soon as you try to activatethese functions or actions, you will see icon7 in the display.

Loading and Ejecting DVDsX Proceed as described in the "Audio CD/

DVD and MP3 mode" section .

Switching to DVD modeX Load a DVD Video disk.

The rear-seat entertainment system loadsthe inserted disk.The DVD is played according to theplayback options:Either the film is started automatically orthe DVD menu appears that is stored on thedisk. In the latter case you must start thefilm manually.

X Select Disc using the remote control.DVD mode is activated.The video DVD meets the playbackcriteria: Either the film is startedautomatically or the DVD menu appears

DVD Video Operation 175

Rear

Sea

t Ent

erta

inm

ent

Z

that is stored on the disk. In the latter caseyou must start the film manually.

X To do so, select the corresponding menuitem in the DVD menu (Y page 178).

i If Disc operation was selected last, thedisk is played automatically after loading.

Hiding or Showing the Control Menu X To display: Press ∆ or ∇ on the remote

control.X To hide: Press ∆ or ∇ on the remote

control.orX Wait for approximately 8 seconds.

Control menu1 Disc type2 Current track3 Current scene4 Elapsed track time5 Displays menu system

Displaying/Hiding Menu SystemX To display: Press the 9 button.orX When the control menu is shown, selectMenu.

Menu system1 DVD-Video menu2 Pause function3 Stop function4 Treble setting5 Bass setting

X To hide: Press ∆ on the remote control andselect Full Screen.

Fast Forward/Rewind X Press and hold the E or F button

until the desired position has beenreached.You see the control menu.

Stop Function X Display the menu system if necessary

(Y page 176).X To interrupt playback: Select ±.

The playback stops.X To resume playback: Select X.

Pause Function X Display the menu system if necessary

(Y page 176).X To pause playback: Select «.

The display « changes to X.

176 DVD Video OperationRe

ar S

eat E

nter

tain

men

t

X To resume playback: Select X.The menu system is hidden.

Selecting a Scene/Chapter If the film is subdivided into scenes orchapters, you can select the scenes orchapters step by step while the film isrunning. Some DVDs do not allow this incertain sections (e.g. in the introduction).X To skip forwards or back: Press \ or Y

on the remote control.orX Press the E or F button.

The control menu (Y page 176) appears forapproximately 8 seconds.

Selecting a Scene/Chapter DirectlyExample: scene/chapter 5X Press the h button while the movie is

running.X Press the corresponding number key, such

as 5.orX Display the menu system if necessary

(Y page 176).X Select DVD-V £ DVD Functions.X Select Scene selection in the menu.X Use the \ or Y button to select number5.In both cases playback will begin after ashort while with scene/chapter 5.

i Scene/chapter selection may also bepossible from the DVD menu stored on theDVD itself.

Selecting a Film/Track If the DVD contains several films, these canbe selected directly. Film selection is possibleboth while the DVD is stopped and while it isplaying.X Display the menu system if necessary

(Y page 176).X Select DVD-V £ DVD Functions.

X Select Title Selection in the menu.X To call up the selection list: Press the9 button.

X Select a film/track.

Selecting a Film/Track DirectlyExample: selecting film 2X Press number button 2.

After a short while, film 2 begins.

i Film selection may also be possible fromthe DVD menu on the DVD itself.

Picture Settings

Adjusting the Brightness, Contrast orColorX Display the menu system if necessary

(Y page 176).X Select DVD-V £ Brightness orContrast or Colour.

DVD Video Operation 177

Rear

Sea

t Ent

erta

inm

ent

Z

X To change setting: Press ∆ or ∇ until thedesired setting has been attained.

X To store a setting: Press the 9 button.

Switching Picture FormatX Display the menu system if necessary

(Y page 176).X Select DVD-V.

The DVD-V menu appears. The ä icon infront of one of these menu items: 16:9optimized, 4:3 or Wide Screen indicatesthe currently selected format.

X To switch formats: Press ∆ or ∇ until thedesired format is selected.

X To save setting: Press 9.

DVD Menu The DVD menu is the menu stored on the DVDitself. It is structured in various waysaccording to the individual DVD and permitscertain actions and settings.

i For multilingual DVDs, you can switchbetween languages in the DVD menu, forexample.

Opening the DVD MenuX Display the menu system if necessary

(Y page 176).X Select DVD-V £ DVD Functions £Menu.The DVD menu appears.

Selecting Menu Items from the DVDMenuX Press ∆, ∇, \ or Y on the remote control.X To confirm your selection: Press 9.

The selection menu appears.

i Menu items which cannot be selected aregrayed out.

DVD menu

X Confirm Select.COMAND will perform the action ordisplays a submenu represented by themenu item selected in the DVD menu. Ifnecessary select from further options in thesame way.

X Make a selection from the further options,if necessary.The rear-seat entertainment system thenswitches back to the DVD menu.

i Depending on the DVD, the Play menuitem may not function at all or may notfunction at certain points in the DVD menu.You will see the 7 icon in the display asan indicator.

Stopping Film or Skipping to theBeginning/End of a SceneX Select any menu item from the DVD menu.

The selection menu appears.X To stop a film: Select Stop from the menu.X To skip to the end of a scene: SelectÔ from the menu.

X To skip to the beginning of a scene:Select Ó from the menu.

i Depending on the DVD, the Ó andÔ menu items may not function at all ormay not function at certain points in theDVD menu. You will see the 7 icon in thedisplay as an indicator.

178 DVD Video OperationRe

ar S

eat E

nter

tain

men

t

Switching to the Next DVD Menu upX Press % on the remote control.orX Select the corresponding menu item in the

DVD menu.orX Select any menu item from the DVD menu.X Select Go up from the menu.

i Depending on the DVD, the Play menuitem may not function at all or may notfunction at certain points in the DVD menu.You will see the 7 icon in the display asan indicator.

Back to MovieX Press % on the remote control

repeatedly until you see the film.orX Select the corresponding menu item in the

DVD menu.orX Select any menu item from the DVD menu.X Select the Back (To the Movie) menu

item from the selection menu.

i Depending on the DVD, the Back (Tothe Movie) menu item may not functionin general or may not function at certainpoints in the DVD menu. You will see the7 icon in the display as an indicator.

Setting Language i This function is not available on all DVDs.

If it is available, you can set the audiolanguage or the audio format. The numberof settings is determined by the DVDcontent. It is possible that the settings mayalso be accessed in the DVD menu(Y page 178).

X Display the menu system if necessary(Y page 176).

X Select DVD-V £ DVD Functions.X Select Audio Language.

A selection menu appears after a shortwhile. The R dot in front of an entryindicates the currently selected language.

X To change a setting: Press ∆ or ∇ until thedesired setting has been reached.

X To save setting: Press the 9.X To exit the menu without changes: Press\ or Y.

Subtitles and Camera Angle i These functions are not available on all

DVDs. The number of subtitle languagesand camera angles available depends onthe content of the DVD. It is possible thatthe settings may also be accessed in theDVD menu.

X Display the menu system if necessary(Y page 176).

X Select DVD-V £ DVD functions.X Select Subtitles or Camera angle.

Both of these will call up a selection menuafter a few seconds. The R dot in front ofan entry indicates the current setting.

X To change a setting: Press ∆ or ∇ until thedesired setting has been attained.

X To save setting: Press 9.X To exit the menu without changes: Press\ or Y.

Interactive Content DVDs can also contain interactive content(e.g. a video game). In a video game, you maybe able to influence events by selecting andtriggering actions. The type and number ofactions depend on the DVD.

DVD Video Operation 179

Rear

Sea

t Ent

erta

inm

ent

Z

X To select an action: Press ∆, ∇, \ or Yon the remote control.

X To trigger an action: Press 9 on theremote control.A menu appears and the first entry,Select, is highlighted.

X Press 9 on the remote control.

Aux Operation

i You can connect two external videosources to the display screens (DisplayAux) and additionally one video source tothe DVD drive (Drive Aux).For further information on external videosources please refer to the operating guideof the device.

Connecting an Aux Source

Drive AuxThe Aux connectors of the drive are besidethe Eject button on the front panel of the DVDdrive .

Display AuxThe display Aux jacks are located on the sideof the screen .

Connecting an Audio or Video SourceX Insert the audio jacks for the left and the

right signal into the respective connectorslabeled L and R.

X Insert the video jack (yellow) into theconnector with the V label.

Switching to Aux Mode

Disk Drive AuxX Select Aux.

The Aux menu appears.

Aux menu

X Select Source £ Drive Aux.The video source is played if it is connectedto the drive and in playback mode. If thereis no video picture available, an Audio menuappears.

i For operating the external video sourceplease refer to the operator’s guide of thedevice.

Display AuxX Select the display screen to which the

external source is connected.X Select Aux.X Select Source £ Display Aux.

The video source is played if it is connectedto the screen and in playback mode. If thereis no video picture available, an Audio menuappears.

Selecting an Active COMAND SourceX Select Aux.X Select Source £ COMANDAudio orCOMANDVideo.COMAND Audio: The Audio mode to whichCOMAND is set is also played by the RSEsystem.

180 Aux OperationRe

ar S

eat E

nter

tain

men

t

COMAND Video: COMAND sends thevideo picture to the RSE system.

Operation with Active Source fromCOMAND

Audio or Video that is active in COMAND canalso be played back via the RSE system.X Switch to the desired Audio mode or

display the menu system in Video mode onCOMAND.

X Select the menu item on the left below, e.g.CD if COMAND is in CD mode.

X Select Active Source for the Rear.

In the status line you will see the headsetsymbol and the symbol _ indicating theactive mode.If you change the mode in COMAND, the newmode is also played back via the RSE system.The display changes accordingly.X To switch off the function in COMAND:

Switch to the desired audio mode inCOMAND or call up the menu system whenin video mode.

X Select the menu item on the left below, e.g.CD if CD mode is selected.

X Select Rear Audio Off.

Setting the Brightness/Contrast/Color X In the AUX menu, select Display Aux orDrive Aux.

X Select Brightness, Contrast or Color.A setting scale appears.

X To adjust setting: Press ∆ or ∇.X To confirm setting: Press 9.

Changing the Picture Format X In the AUX menu, select Display Aux orDrive Aux.The ä icon in front of one of these menuitems: 16:9 optimized, 4:3 or WideScreen indicates the currently selectedformat.

X To switch formats: Press ∆ or ∇ until thedesired format is selected.

X To save setting: Press 9.

Aux Operation 181

Rear

Sea

t Ent

erta

inm

ent

Z

182

Overview ............................................ 184Phone ................................................. 187Navigation ......................................... 189Address Book .................................... 195Radio and Satellite Radio ................. 199DVD Changer ..................................... 202External Equipment (Aux) ................ 203Command List ................................... 203Troubleshooting ................................ 210

183

Voic

e Co

ntro

l

Overview

Operating Safety

G Warning!Please devote your attention first andforemost to the traffic situation you are in.While the system permits hands-free phoneoperation, attention to traffic may be divertednot only by physical operation of a phone, butalso by the distraction of a phoneconversation while driving. As such, for safetyreasons, we encourage the driver to stop thevehicle in a safe place before answering orplacing a phone call.For safety reasons, you should only select adestination when the vehicle is stationary.While the navigation system providesdirectional assistance, the driver must remainfocused on safe driving behavior, especiallyattention to traffic and street signs, andshould utilize the system’s audio cues whiledriving.The navigation system does not supply anyinformation on stop signs, yield signs, trafficregulations or traffic safety rules. Theirobservance always remains in the driver’spersonal responsibility. DVD maps do notcover all areas nor all routes within an area.Traffic regulations always have priority overany route recommendations given.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.

G WarningNavigation announcements are intended todirect you while driving without diverting yourattention from the road and driving.Please always use this feature instead ofconsulting the map display for directions.Consulting the symbols or map display fordirections may cause you to divert yourattention from driving and increase your riskof an accident.

G Warning!Please do not use the Voice Control Systemin an emergency, as the tone of your voicemay change in a stressful situation. This couldcause a delay in completing your phone callin a timely manner. This could distract you inan emergency situation and cause you to beinvolved in an accident.

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

Symbols Only Used in this ChapterThe following symbols indicate:s that you have to say somethingt that there is a voice output from the

voice controlu that the system shows information on

the display.

Usage You can use the voice control system tooperate the following systems depending onthe equipment in your vehicle:RPhoneRNavigationRAddress bookRAudio (radio, satellite radio, DVD changer,

memory card, music register)Say the commands without pausing betweenindividual words. If you enter a command thatdoes not exist or is incorrect, the voicecontrol system asks you for a new commandwith “Please repeat” or “Please repeat your

184 OverviewVo

ice

Cont

rol

entry!”. The voice control confirms importantcommands to you and gives you instructionsin the event of incorrect entries.

Command TypesVoice control distinguishes between thefollowing types of command:RGlobal commands:

These are commands which can be calledup at any time (e.g. help or phonecommands).RLocal commands:

These are commands which are onlyavailable for the active application (e.g.“Enter destination” during navigation).

Active ApplicationThe local commands refer to the applicationcurrently shown on the display and to theaudio source you are currently listening to.For example, if you are listening to the radiowhile the navigation application is active onthe display, you can operate bothapplications using voice control.To operate a different function using voicecontrol, you must first switch to thatapplication using the correspondingcommand.

Operating Voice Control

Vehicles with Voice Control Buttons onthe Multi-Function Steering Wheel

Example display: M-Class1? Activates voice control2% Cancels voice control3 X Decreases the volume

W Increases the volumex Mute

i You can cancel the dialog with voicecontrol at any time.

Voice control is operational around half aminute after COMAND is switched on.

Vehicles with Lever for Voice Control

Example display: SL-Class1 Cancels voice control2 Activates voice control3 X Decreases the volume

W Increases the volume

Overview 185

Voic

e Co

ntro

l

Z

Starting the DialogX Switch on the ignition (see the vehicle

Owner's Manual).X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the lever toward youAn acoustic signal confirms that the dialoghas been started.

X Give a command.

Interrupting the DialogIf a list appears on the display, you can usethe “Pause” command to interrupt the dialog.You can then select an entry using theCOMAND control panel.To resume the dialog with voice control, pressthe ? button on the multifunction steeringwheel.

Canceling the DialogX Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe % button.

orX Vehicles with Lever for Voice Control:

Push the lever away from you.An acoustic signal confirms that the dialoghas been started.

orX Say the command “Cancel” (except when

creating and storing voice tags, navigationentries or during individualization).

orX Press any button on COMAND.

Adjusting the VolumeX Start the dialog.X Give a command, e.g. “Help”.

X Press the W or X button.The volume increases or decreases duringvoice output.

orX Set the volume for the voice output on the

volume control for COMAND.

Display MessagesThe audible help function can besupplemented by visual help on the display(Y page 41). If the help function is switchedon, the most important commands that arecurrently possible appear in the display whenyou start the dialog.In the address book and navigation system, aselection list is shown in the display if voicecontrol requires additional information fromyou.

1 Display

Entering NumbersRDigits from “zero” to “nine” are permitted.RSay the phone number in groups of three

to five digits.

SpellRThe letters of the alphabet and the numbers

0 to 9 are permitted.RSay the letters in groups of five to seven

letters.RSay each individual letter clearly.

186 OverviewVo

ice

Cont

rol

i Using individualization, you can fine-tunevoice control to your own voice and thusimprove voice recognition. The process ofindividualization is described in chapter“System Settings” (Y page 41).

i If you use individualization, it may impairrecognition of other users. Switch offindividualization if it makes recognition ofother users worse.

Phone

G WarningSome jurisdictions prohibit the driver fromusing a cellular telephone while driving.Whether or not prohibited by law, for safetyreasons, the driver should not use the cellulartelephone while the vehicle is in motion. Stopthe vehicle in a safe location before placing oranswering a call.If you nonetheless choose to use the mobilephone while driving, please use the handsfreefeature and be sure to pay attention to thetraffic situation at all times. Use the mobilephone only when road, weather and trafficconditions permit. Otherwise, you may not beable to observe traffic conditions and couldendanger yourself and others.Bear in mind that at a speed of just 30 mph(approximately 50 km/h), your vehicle iscovering a distance of 44 feet (approximately14 m) every second.

OperationYou can use voice control to:Rplace a call by using your voice to input a

phone numberRstore names and numbers in the address

bookRdial a number from the address bookRlisten to the phone book

Rretrieve and manage your voice mail andrecorded announcement servicesRredialVoice control recognizes whether:Ryour phone is switched onRyour phone is connected via Bluetooth®

Rthe car phone is registered with therelevant mobile phone networkRit is possible to dialIf it is not possible to dial, voice control issuesa message to this effect.

i You can still operate your phone using thekeypad.

Commands

“Phone”Use the “Phone” command to select thephone application. Use this command if youwish the digits entered to be shown on thedisplay.

“Help Phone”Voice control has an extensive help function.Using the “Help Phone” command, you canhave all the essential commands for thephone read out (Y page 204).

“Dial number”You can use the “Dial number” command todial a phone number.The digits 0 to 9 and the word “Plus” arepermitted.“Plus” replaces the international dialing code,e.g. “00”.Say the phone number in the form of acontinuous string of digits or as blocks ofdigits, e.g. three to five digits.Voice control repeats the digits it recognizesafter each block of digits (with a pause ofabout half a second between each block ofdigits) and waits for you to continue speaking.

Phone 187

Voic

e Co

ntro

l

Z

Example of dialog:s Dial numbert Please say the numbers Zero one three zerot Zero one three threes Five zero zero fivet Five zero zero fives Okayt Dialing number.

i You can also dial the specified number ifyou press the 6 button on the multi-function steering wheel instead of theconcluding command “Okay”.

“Confirm”While you are entering a number, you can usethe “Confirm” command to have all thespoken digits repeated by voice control.Voice control will then prompt you tocontinue with the entry.Example of dialog:s Dial numbert Please say the numbers Zero one three zerot Zero one three zeros Confirmt Zero one three zero. Please continues Five zero zero fivet Five zero zero fives Okayt Dialing number.

i You can also dial the specified number ifyou press the 6 button on the multi-function steering wheel instead of theconcluding command “Okay”.

“Correction”While you are entering a number, you can usethe “Correction” command to correct theblock of digits last spoken. When you inputthis command, voice control deletes the lastblock of digits and repeats the digits input up

to this point. Voice control will then promptyou to continue with the entry.Example of dialog:s Dial numbert Please say the numbers Zero one three zerot Zero one three zeros Five zero zero fivet Five zero zero fives Correctiont Zero one three zero. Please continues Five zero zero fivet Five zero zero fives Okayt Dialing number.

“Delete”While you are entering a number, you can usethe “Delete” command to delete all the digitswhich have been entered. After you haveinput this command, voice control promptsyou to enter additional digits or commands.Example of dialog:s Dial numbert Please say the numbers Zero one three zerot Zero one three zeros Five zero zero fivet Five zero zero fives Deletet Number deleted, please say the

number again:s Zero three seven threet Zero three seven threes Three nine onet Three nine ones Okayt Dialing number.

188 PhoneVo

ice

Cont

rol

“Save Name” (Address Book)(Y page 196)

“Dial Name” (Address Book)(Y page 197)

“Delete Name” (Address Book)(Y page 197)

“Find Name” (Address Book)(Y page 197)

“List Phone Book” and Dialing a PhoneNumberYou can use the “List phone book” commandto listen to all entries in the phone book inwhich a phone number is also stored and, ifrequired, select an entry.Example of dialog:s List phone book

The system reads out all the addressbook entries with phone numbers. Ifthere is more than one phone numberfor an entry, voice control queries this.

t Do you want to make a work call or ahome call?

s Home call

To cancel the dialog:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe % button.

X Vehicles with Lever for Voice Control:Push the Voice Control lever away fromyou.You have canceled the dialog. The systemconfirms by responding “Cancel”.

“Redial”You can use the “Redial” command to redialthe number most recently called.

Managing Announcement Services orVoice MailYou can also use voice control to manageyour voice mail or recorded announcementservices.While a phone call is in progress:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button while a phone call is inprogress.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.An acoustic signal confirms that the systemis activated.

X Say the required digits (“zero” to “nine”).orX Say the required words “Star” or “Hash”.X Say the concluding command “Okay”.

The system dials the number entered.

Navigation

G Warning!For safety reasons, you should only select adestination when the vehicle is stationary.While the navigation system providesdirectional assistance, the driver must remainfocused on safe driving behavior, especiallyattention to traffic and street signs, andshould utilize the system’s audio cues whiledriving.The navigation system does not supply anyinformation on stop signs, yield signs, trafficregulations or traffic safety rules. Theirobservance always remains in the driver’personal responsibility. DVD maps do notcover all areas nor all routes within an area.Traffic regulations always have priority overany route recommendations given. Bear inmind that at a speed of just 30 mph(approximately 50 km/h), your vehicle is

Navigation 189

Voic

e Co

ntro

l

Z

covering a distance of 44 feet (approximately14 m) every second.During route guidance, you will not receiveinformation on:Rtraffic lightsRstop and yield signsRparking or stopping zonesRone-way streetsRnarrow bridges, orRother traffic regulation data.

You should therefore always strictly observetraffic regulations while driving. Drivecarefully and always obey traffic laws androad signs, even if they contradict navigationsystem instructions.

G WarningNavigation announcements are intended todirect you while driving without diverting yourattention from the road and driving.Please always use this feature instead ofconsulting the map display for directions.Consulting the symbols or map display fordirections may cause you to divert yourattention from driving and increase your riskof an accident.

G Warning!Please do not use the Voice Control Systemin an emergency, as the tone of your voicemay change in a stressful situation. This couldcause a delay in completing your phone callin a timely manner. This could distract you inan emergency situation and cause you to beinvolved in an accident.

OperationYou can use voice control to:Renter a stateRenter a provinceRenter a cityRenter a district (center)

Renter a streetRenter a house numberRenter an entire addressRenter a zip codeRfind addressRenter a point of interestRselect one of your previous destinationsRcall up route informationRstore a destinationRdisplay the mapRenlarge/reduce the size of the mapRlisten to the destination memoryRstart and stop route guidanceRswitch the guidance instructions on and off

To select the navigation application:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Give the “Navigation” command.X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Give one of the navigation commands

explained below.

Commands You cannot start the route guidance until allthe necessary address data has beenentered.

190 NavigationVo

ice

Cont

rol

“Help Navigation”/“Help”Using the “Help navigation” command, youcan have all the essential commands for thenavigation system read out.

Entering an Address i If voice control fails to recognize your

entry, it is advisable to spell the name ofthe town and street. Spell names of townsand streets when abroad.

The system guides you completely throughthe dialog to route guidance. As soon as avalid address is entered (at least the town),you can use the “Start route guidance”command to start the route guidance.

“Enter state”/“Enter province”You can use the “Enter state”/“Enterprovince” command to change the state orprovince setting of the navigation system.Example of dialog:s Enter statet Please enter the name of the state.u The system shows a numbered list of

possible state names on the display. Ifthere is only one entry on the list, voicecontrol asks if it is correct.

t Please select a line number.s Line number 1 ...t Line number 1 accepted.

“Enter Destination”You can use the “Enter destination”command to enter a complete address.The system guides you through the wholedialog. As soon as a valid address is entered(at least the town), you can use the “Startroute guidance” command to start the routeguidance.Example of dialog:

s Enter destinationt Do you want to enter street first or

town first?s Townt Please say the name of the towns Albanyt Loading list of townsu The system shows a numbered list of

possible city names on the display. Ifthere is only one entry on the list, voicecontrol asks if it is correct.

t Please select a line number.s Line number 1 ...t Line number 1 accepted.t Would you like to enter a street?s Yest Please say the name of the streets Park Avenuet Loading list of streetsu The system shows a numbered list of

possible street names on the display.If there is only one entry on the list,voice control asks if it is correct.

t Please select a line number.s Line number 1 ...t Line number 1 accepted.t Would you like to enter a house

number?s Not Would you like to start route guidance?s Yest Starting route guidanceThe system stores the selected destinationand starts route guidance.If you give one of the following commands,the system guides you through the dialog toroute guidance.

“Enter Town”You can use the “Enter town” command toenter any town in the state or province that iscurrently selected.

Navigation 191

Voic

e Co

ntro

l

Z

i If the city you require does not appear inthe list or the system fails to recognize thename of the town, it can be entered byusing the “Spell town” command.

i You can use the “Next page” or “Previouspage” commands to scroll through the list.You can use the “Correction” command toenter the name of the town again.

Example of dialog:s Enter townt Please say the name of the towns Albanyt Loading list of townsu The system shows a numbered list of

possible town names on the display. Ifthere is only one entry on the list, voicecontrol asks if it is correct.

t Please select a line number.s Line number 1 ...t Line number 1 accepted.The town is stored for route guidance.

“Spell town”Using the “Spell town” command, you canspell any town. This may be necessary ifcertain town or street names are notrecognized.Say the letters in the form of a continuousstring of letters. In the case of long names, itis not always necessary to spell the wholename. Usually only the first five to sevenletters are required.A list of city names will appear in the displayand you can choose the one you require.Say each individual letter clearly.It is not easy to avoid confusion ofsimilarsounding letters (e.g. D and E).Example of dialog:s Spell townt Please spell the towns F-R-E-N-St Loading list of towns

u The system shows a numbered list ofcity names on the display.

t Please select a line number.s Number threet Number three accepted.The town is stored for route guidance.

i You can use the “Next page” or “Previouspage” commands to scroll through the list.You can use the “Correction” command tospell the town again from the beginning.

i Note that the list in the display is sortedaccording to the probability of voicerecognition.

“Enter District” (Center)You can use the “Enter district” command toenter an area in a city which you haveselected previously.Example of dialog:s Enter districtt Please say the name of the district.s Manhattanu The system shows a numbered list of

districts in the display if the selectedcity has more than one district.

t Please select a line number.s Line number 1 ...t Line number 1 accepted.The district is stored for route guidance.

“Enter Street”You can use the “Enter Street” command toenter the name of any street in the selectedcity.

i If only a few streets are stored for aselected town, they will be displayed forselection immediately after you give the“Enter Street” command.

Example of dialog:s Enter Streett Please say the name of the street

192 NavigationVo

ice

Cont

rol

s Mabel’s Streetu The system shows a numbered list of

street names on the displayt Please select a line number.s Number threet Number three acceptedThe street name is stored for route guidance.

“Correction”If you have entered or spelled a city or street,you can use the “Correction” command toenter the city or street again or spell it fromthe beginning.

“House Number”You can use the “House number” commandto specify the house number for the selectedstreet in individual digits.Example of dialog:s House numbert Please say the house number in single

digitss Three fourt Three fours OkayThe house number is stored for routeguidance.

“Point of interest” (POI)You can use the “Point of interest” commandto select specific destinations (filling stations,airports, stations, etc.).Example of dialog:s Point of interestu The system shows the following list in

the display:1. Current position2. Other town

t Please select a line number.s Line number 1 ...t Line number 1 accepted.

u The system shows a numbered list ofPOI categories

t Please select a line number or say thecategory name

s Line number 5 ...u The system shows a numbered list

with destinations from the selectedcategory

t Please select a line number.s Line number 1 ...t Line number 1 accepted.The specific destination which has thenumber one is stored for route guidance.

i Depending on the selected area, otherlists may be shown.

You can only select points of interest in thestate or province the navigation system is setfor.

Selecting next point of interestYou can use the following commands toselect nearby points of interest.R“Next gas station”R“Next car park”R“Next Mercedes-Benz Service”R“Next restaurant”R“Next hospital”Example of dialog:s Next gas stationu The system shows a numbered list of

gas stations on the displayt Please select a line number.s Line number 1 ...u Line number one accepted. Would you

like to start route guidance?s YesThe route guidance for this point of interestis started.or

Navigation 193

Voic

e Co

ntro

l

Z

s Not Do you want to save the destination?s YesThe dialog continues as shown in the section“Save destination”.

“Last Destinations”You can use the “Last destinations”command to reselect a destination from a listof the previously selected destinations.Example of dialog:s Last destinationsu The system shows a numbered list of

the previously selected destinationst Please select a line number.s Line number 1 ...u Line number one accepted. Would you

like to start route guidance?s YesThe route guidance for this destination isstarted.

“Save Destination”You can use the “Save destination” commandto save the current destination in the addressbook by means of a voice tag.

i If the desired voice tag already exists inthe address book, the system asks if youwant to add the address.

Example of dialog:s Save destinationt Please say the name.s Smitht Please repeat the name.s Smitht Where would you like to save: home or

work?s Workt The destination has been saved.The route guidance for this destination isstarted.

“Find Address”You can use the “Find address” command toselect a previously saved address and startroute guidance.Example of dialog:s Find addresst Please say the name.s Smithu The system shows a numbered list of

saved addresses in the displayt Please select a line number.s Line number 1 ...t Line number 1 accepted.t Starting route guidance

“Start Route Guidance”When Route Guidance is inactive, you can usethe “Start route guidance” command to startroute guidance once a valid destination hasbeen entered.s Start route guidancet Starting route guidance

“Route Information”You can use the “Route information”command to have the following informationon your currently planned route read out:RDistance to destinationRRemaining driving timeRExpected arrival time

“Guidance Instructions On”When you use the “Guidance instructions on”command, voice control repeats the lastdriving tip. If the driving tip output has beenswitched off up to this point, it is nowswitched on again.

“Guidance Instructions Off”You can use this command to switch off theroute guidance voice output.

194 NavigationVo

ice

Cont

rol

“Cancel Route Guidance”You can use this command to stop routeguidance.Example of dialog:s Cancel route guidancet Are you sure you want to cancel route

guidance?s Yest Cancelling route guidanceVoice control cancels route guidance.ors Not Continuing route guidance.The dialog with voice control is terminated.Route guidance remains activated.

“Zoom In”/“Zoom Out”You can use these commands to zoom themap display one step in or out.

“Zoom In Completely”/“Zoom OutCompletely”You can use these commands to set the mapdisplay directly to the smallest or largestscale.

“List Destination Memory”You can use the “List destination memory”command to listen to the entries from theaddress book’s destination memory and, ifrequired, navigate to one of them.Example of dialog:s List destination memory

The system reads out all entries, fromthe address book destination memory.

To select an entry and set an address:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel:

Press the ? button at the selectedentry.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you atthe selected entry.t If there is more than one address, the

system asks “Navigate to: home orwork?”

s HomeThe system starts route guidance.To cancel the dialog:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel:Press the % button.

orX Vehicles with Lever for Voice Control:

Push the Voice Control lever away fromyou.You have canceled the dialog. The systemconfirms by responding “Cancel”.

Address Book

G Warning!Please devote your attention first andforemost to the traffic situation you are in.Before your journey, please familiarizeyourself with the address book functions.Only use the Voice Control System when roadand traffic conditions permit you to do so.Otherwise you could be involved in anaccident in which you or others could beinjured.

OverviewThe address book gives you the option ofstoring information about people in the formof entries.Using voice control, you can dial a phonenumber stored in the address book or startroute guidance for a stored address.

Address Book 195

Voic

e Co

ntro

l

Z

Apart from the speaker-dependent voice tagsstored in the address book, voice control canrecognize all the entries in the name fields ofthe address book. Recognition of the entriesin the address book depends on the text thatwas entered. To make a call you must say thetext of the entry.Check the address book entries for thefollowing:RThe name entries, e.g. last name and first

name, are in the right fields.RDo not use abbreviations or acronyms.RAvoid unnecessary spaces in names.RDo not use special characters.You can improve voice recognition by savinga speaker-dependent voice tag for addressbook entries.Use a speaker-dependent voice tag:Rfor names which are difficult to pronounceRto distinguish names which sound similarRfor names which are not pronounced as

they are writtenVoice control can store up to 50 of theseaddress book entries by means of a speaker-dependent voice tag.

OperationYou can use voice control at any time to:Rsave a nameRselect a nameRdelete a nameRlist the address bookRdelete the address bookRopen the address bookRopen an entry from the address bookRlist the phone bookRlist the destination memory

To open the address book:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Give the “Address book” command.X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Give one of the address book commands

explained below.

Commands

“Address Book”X To open the address book: Say the

command “Address book”.

“Help Address Book”X Using the “Help address book” command,

you can have all the essential commandsfor the address book read out.

“Save Name”Use the “Save name” command to save aphone number with a voice tag for a specificspeaker. Use this command for a name whichis complicated or which is pronounceddifferently as it is spelled, for example,because it is a foreign name. When you havegiven the command “Save Name”, voicecontrol prompts you to enter a phonenumber.The digits 0 to 9 and the word “Plus” arepermitted.“Plus” replaces the international dialing code,e.g. “00”.

196 Address BookVo

ice

Cont

rol

Say the phone number in the form of acontinuous string of digits or as blocks ofdigits, e.g. three to five digits.Voice control repeats the digits it recognizesafter each block of digits (with a pause ofabout half a second between each block ofdigits) and waits for you to continue speaking.When you have given the command “Okay”,voice control prompts you two or three timesto say the name. When repeating the name,make sure that you pronounce it in exactlythe same way as you did the first time.Otherwise, the name cannot be saved andvoice control aborts the saving procedure.Example of dialog:s Save namet Please say the numbers Zero one three zerot Zero one three zeros Five zero zero fivet Five zero zero fives Okayt Please say the name.s Smitht Please repeat the name.s Smitht Would you like to save the number in

a category?s Not Name and number saved

“Dial Name”You can use the “Dial name” command toplace a call by selecting a name from youraddress book. You can choose either a voicetag or say a name entry.Only say the surname if only the surname isentered in the address book.Say the surname first and then the first nameif both are entered in the address book.Example of dialog:s Dial namet Please say the name

s SmithIf there is more than one phonenumber for an entry, voice controlqueries this.

t Do you want to make a work call or ahome call?orPlease select a line number

s Workt Smith work. Dialing number.

“Find Name”Use the “Find name” command to search fora name in the address book. Voice controlthen asks what action you want it to perform:for example call the selected number, startroute guidance to the saved address or openthe entry.

“Find Address”(Y page 194)

“Delete Name”Use the “Delete name” command to delete avoice tag from your address book.Example of dialog:s Delete namet Please say the names Smitht Do you want to delete Smith?s Yest The voice tag has been deleted

“List Address Book”You can use the “List address book”command to listen to all names and voice tagsin the address book. You can select an entryduring this.If no name is entered in the name field of theaddress book, the phone number or theaddress is read out. A name can be enteredlater in the name field.Example of dialog:

Address Book 197

Voic

e Co

ntro

l

Z

s List address bookThe system reads out all address bookentries. If there is a large number of entries,the system asks from which entry it shouldstart the reading.

i If you do not say a name, voice controlreads out all address book entries.

To select an address book entry:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel:Press the ? button at the selectedentry.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.The entry is selected and shown on thedisplay. Voice control asks whether theselected entry should be called, navigatedto or opened.

X To select an address book entry:Press the ! button at the selectedentry.The entry is selected and shown on thedisplay. Voice control asks whether theselected entry should be called, navigatedto or opened.

To cancel the dialog:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel:Press the % button.

orX Vehicles with Lever for Voice Control:

Push the Voice Control lever away from youYou have cancelled the dialog. The systemconfirms by responding “Cancel”.

“List Phone Book” and Dialing a PhoneNumber(Y page 189)

“Delete Address Book”You can use the “Delete address book”command to delete individual voice tags or allthe voice tags in the address book. Theaddress data is not deleted.

“Find Entry”You can use the “Find entry” command toopen any address book entry.Example of dialog:s Find entryt Please say the names Smithu The system shows a numbered list in

the display.t Please select a line number.s Line number 1 ...t Line number 1 accepted.

The system opens the first entry on thelist.If the selected entry contains at leastone phone number or an address,voice control asks whether you wantto dial the number or navigate to thestored address.

“Spell Entry”You can use the “Spell entry“ command toopen any address book entry by spelling thename.Say the letters in the form of a continuousstring of letters (five to seven letters).A list of possible entries will appear in thedisplay and you can choose the one yourequire.Example of dialog:s Spell entryt Please spell the name.s S-M-I-T-Hu The system shows a numbered list in

the display.t Please select a line number.

198 Address BookVo

ice

Cont

rol

s Number fourt Number four accepted

The system opens the fourth entry onthe list.If the selected entry contains at leastone phone number or an address,voice control asks whether you wantto dial the number or navigate to thestored address.

i You can use the “Next page” or “Previouspage” commands to scroll through the list.You can use the “Correction” command tospell the name again.

Radio and Satellite Radio

G Warning!Please devote your attention first andforemost to the traffic situation you are in.Before your journey, please familiarizeyourself with the radio functions.Only use the Voice Control System when roadand traffic conditions permit you to do so.Otherwise you could be involved in anaccident in which you or others could beinjured.

OperationYou can use voice control to:Rselect the wavebandRfind a stationRselect a frequency (FM, AM)Rselect a category (Satellite radio)Rlisten to the station listRsave a voice tag for a stationRdelete a station list (voice tags only)Rdelete a station (voice tag only)Rselect a channel number (Satellite radio)The names of all received and stored stationsare available for voice recognition. To

improve voice recognition, you can store avoice tag for a specific speaker.To select the radio or satellite radioapplication:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button on the multifunctionsteering wheel.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward youX Say the command Radio or SatelliteRadio.

X Vehicles with Voice Control buttons onthe Multi-function Steering Wheel: Pressthe ? button on the multifunctionsteering wheel.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward youX Say one of the radio or satellite radio

commands explained below.

CommandsYou can always give the commands for theradio when you are listening to the radio, evenif a different application is shown on thedisplay.

“Help Radio”Using the “Help Radio” command, you canhave all the commands for the radio read out.

“Help Satellite Radio”Using the “Help Satellite Radio” command,you can have all the commands for thesatellite radio read out.

Selecting a WavebandYou can set the waveband with the followingcommands:

Radio and Satellite Radio 199

Voic

e Co

ntro

l

Z

R“FM”R“AM”

“Next Station”/“Previous Station”You can start manual tuning and set the nextstation using the following commands:R“Next station”R“Previous station”

“Next Category”/“Previous Category”You can use the following commands tochange the category on satellite radio:R“Next category”R“Previous category”

Selecting the Frequency (FM Range)You can select frequencies within the FMrange (87.9 to 107.9 MHz) directly. Voicecontrol also recognizes the words“frequency”, “point” and “megahertz”.Example of dialog:s Eighty seven point five megahertzu Voice control sets the frequency.

Selecting the Frequency (AM Range)You can select frequencies within the AMrange (530 to 1710 kHz) directly. Voicecontrol also recognizes the words“frequency” and “kilohertz”.Example of dialog:s Five hundred and thirty kilohertzu Voice control sets the frequency.

“Save Station”Using the “Save station” command you cangive a voice tag to the station currentlyselected. You can also use this command toimprove voice recognition for difficult namesor if you want to use a name of your own. Youcould, for example, save a station with thename “Favorite station”.

When you have given the command, voicecontrol prompts up to three times to say thestation name. When repeating the stationname, make sure that you pronounce it inexactly the same way as you did the first time.Otherwise, the name cannot be saved andvoice control aborts the saving procedure.Example of dialog:s Save stationt Please say the station names Favorite stationt Please repeat the station name.s Favorite stationt The station has been saved.

“Select Station”Using the “Select station” command, you canselect a saved station..Example of dialog:s Select stationt Please say the station names Favorite stationu Voice control sets the station

“Favorite Station”Using this command, you can select a savedstation.Example of dialog:s Favorite stationu Voice control sets the station

“Select Category” (Satellite radio)Using the “Select category” command, youcan select an available category.Example of dialog:s Select categoryt Please say the category names Newsu Voice control sets the category

200 Radio and Satellite RadioVo

ice

Cont

rol

“Category News” (Satellite Radio)Use this command to select a satellite radiocategory.Example of dialog:s Category newsu Voice control sets the category

“Enter Channel Number” (SatelliteRadio)Use the command “Enter channel number” toselect a satellite radio category.

“List Station List” and “Selecting aStation”Using the “List station list” command, youcan hear a list of all receivable stations andchoose one from your station list.

i If voice control does not recognize thestation name, have it read out the list ofstations. This allows you to check whetheryou have saved the station you require inthe station list.

Example of dialog:s List station listThe system reads out the station list.If the station you require is read out:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.The system sets the correspondingfrequency.

To cancel the dialog:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe % button.

orX Vehicles with Lever for Voice Control:

Push the Voice Control lever away fromyou.You have canceled the dialog. The systemconfirms by responding “Cancel”.

“Delete Station”You can use the “Delete station” command todelete a voice tag for a station from yourstation list.Example of dialog:s Delete stationt Which station would you like to delete?s Favorite stationt Do you want to delete “Favorite

station”?s Yest Station deleted.

“Delete Station List”You can use the “Delete station list”command to delete all voice tags or individualones from your station list.Example of dialog:s Delete station listt Would you like to delete all voice tags

from the station list?s Yest Are you sure?s Yest All voice tags have been deleted from

the station listu The system permanently deletes all

voice tags in the station list.ors NoThe system reads out the list of stations.

Radio and Satellite Radio 201

Voic

e Co

ntro

l

Z

When the system reads out the stations to bedeleted:X Press the ? button.

The station to be deleted is selected. Thesystem reads out the selected stationagain.t Do you want to delete “Favorite

station”?s Yest Station deletedu The system deletes the station and

reads out the remaining entries in thestation list.or

s NoThe system continues to read out the list ofstations.

DVD Changer

G WarningPlease devote your attention first andforemost to the traffic situation you are in.Before your journey, please familiarizeyourself with the radio and disc functions.Only use the Voice Control System when roadand traffic conditions permit you to do so.Otherwise you could be involved in anaccident in which you or others could beinjured.

OperationYou can use voice control to:Rselect a CD/DVDRselect a trackRselect a directory in MP3 operationRselect a group in Audio DVD operation

i On the command “Next/previous CD/DVD”, the DVD changer changes from oneCD/ DVD to the next, skipping any emptycompartments. If you select an empty

compartment with the “CD/DVD 1 to CD/DVD 6” command, the currentcompartment remains selected.

To select the CD application:X Vehicles with Voice Control buttons on

the Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Say one of the following commands:R“CD player/CD changer”R“DVD audio”R“DVD video”R“MP3”

X Vehicles with Voice Control buttons onthe Multi-function Steering Wheel: Pressthe ? button.

orX Vehicles with Lever for Voice Control:

Pull the Voice Control lever toward you.X Give one of the CD or DVD commands

explained below.

Commands

“Help CD”/“Help DVD”/“Help MP3”With the commands:R“Help CD”R“Help DVD audio”R“Help DVD video”R“Help MP3”you can have all the commands for the CD,DVD or MP3 read out.

“Next CD/DVD”With the “Next CD”/“Next DVD” commands,you can select the next audio CD/ DVD fromyour DVD changer.

202 DVD ChangerVo

ice

Cont

rol

“Track 1” to “Track 99”With the “Track 1” to “Track 99” commands,you can select a track number from theinserted CD/DVD.

“Next Track”You can use the “Next track” command toselect the next track.

“Previous Track”With the “Previous track” or “Repeat track”commands, you can have the track justplayed repeated. If the command is spokenas the first few seconds of the track areplayed, the previous track is selected.

“Group 1” to “Group 9”With the “Group 1” to “Group 9” commands,you can select a group on an inserted audioDVD.

“Next Group”/“Previous Group”With the “Next group”/“Previous group”commands, you can select the next orprevious group on the inserted audio DVD.

“Next Folder”/“Previous Folder”With the “Next folder”/“Previous folder”commands, you can select a folder on theinserted CD/DVD in MP3 mode.

“Memory Card”With the “Memory card” command, you canswitch to the SD card on the COMANDsystem.

“DVD Video”With the “DVD video” command, you can starta video DVD on the COMAND system.

“Hard Disk”With the “Hard disk” command, you canchange to the internal hard disk (MusicRegister) of COMAND.

External Equipment (Aux)

“Audio Aux”You can use the “Audio Aux” command toactivate the aux input.

Command List

In the Command list section, you will find allthe main commands for operating voicecontrol. The commands available to youdepend on the vehicle’s equipment.

i Some functions have several voicecommands to facilitate operation. Theseare grouped together between theseparator lines in the list and can be usedinterchangeably.

General Commands

RYesRCorrectROkay

RCancel

RNo

RPause

RAddress book

RMP3

RCD changer

RCD

Command List 203

Voic

e Co

ntro

l

Z

RNavigationRRoute guidanceRNav

RDVD video

RDVD audio

RRadio

RSatellite radio / Sirius

RPhone

RMessages

RVideo

RCorrectionRWrongRIncorrect

RHelp

RHelp functionsRHelp devices

RHelp voice control [system]RHelp voice control/voice control helpRGeneral help

R0 – 9

RLetters of the alphabet

RContinueRGo forwardRNext page

RPrevious pageRGo backRBack

RHelp radio

RHelp phone/help telephone

RHelp address book

RHelp CD changer

RHelp DVDRHelp DVD changer

RHelp DVD audioRHelp DVD audio changer

RHelp MP3RHelp MP3 changer

RHelp navigationRHelp route guidanceRHelp nav

Phone Commands

RPhoneRTelephone on/phone on

RSaveRSave nameRSave numberRSave phone number

RDial numberRDial phone number

RConfirmRConfirm numberRConfirm phone number

RList phone bookRRead out phone book

RRedialRRedial last numberRRedial last phone number

204 Command ListVo

ice

Cont

rol

RCorrectionRIncorrectRWrong numberRWrong phone number

RDeleteRDelete nameRDelete phone number

Navigation Commands

RNavigationRRoute guidanceRNav

RGuidance instructions onRSwitch guidance instruction/

instructions on Switch route guidanceinstruction/ instructions onRListen to guidance instruction/

instructions

RGuidance/route guidance instructionsoffRSwitch off guidance/route guidance

instructionsRMute guidance/route guidance

instructions

RHouse numberREnter house number

RMapRShow mapRMap on/switch on map

RZoom inRZoom in on map

RZoom outRZoom out of map

RZoom out completely

RZoom in completely

REnter stateRChange stateREnter provinceRChange provinceREnter destination areaRAnother state

RLast destinations

REnter townREnter name of town

RSpell townRSpell name of town

RDistrictREnter districtRCenterREnter center

RSpell districtRSpell center

RPoint(s) of interest/POI(s)REnter point(s) of interest/POI(s)

RStreetREnter streetRName of streetREnter name of street

RSpell streetRSpell name of street

REnter destination

RSave destinationRSave address

Command List 205

Voic

e Co

ntro

l

Z

RStart route guidance/routing/destination guidanceRBegin route guidanceRBegin destination guidanceRContinue route guidance/destination

guidance

RCancel route guidance/navigation/nav/destination guidanceRExit route guidance/navigation/nav/

destination guidanceRStop route guidance/navigation/ nav/

destination guidanceRTerminate route guidance/navigation/

nav/destination guidance

RNext gas station

RNext Mercedes-Benz ServiceRNext workshopRNext MB service

RNext hospital

RNext car park

RNext restaurant

Address Book Commands

RAddress book

RList address bookRRead out/play address book

RDelete address book

RSpell entryRSpell name

RFind entry

RDelete name

RList destination memoryRRead out/play destination memory

R<voice_name_tu>

R<voice_name_ad> carR<voice_name_ad> car phone

R<voice_name_ad> landlineR<voice_name_ad> landline phone

R<voice_name_ad> mobileR<voice_name_ad> mobile phoneR<voice_name_ad> phone

R<voice_name_ad> workR<voice_name_ad> home

RWorkROfficeRCompany/business

RCarRCar phone

RLandlineRLandline phone

RMobileRMobile phone

RWork carRWork car phoneRCar phone work/office/business/

company

RWork/office/business/company/landlineRWork/office/business/company/

landline telephone/phoneRLandline telephone/phone work/office/

business/company

206 Command ListVo

ice

Cont

rol

RWork/office/business/company/mobileRWork/office/business/company/

phoneRMobile phone work/office/business/

company

RHome

RHome carRHome car phoneRCar phone home

RHome landlineRHome landline telephone/phoneRLandline telephone/phone home

RHome mobileRHome mobile phoneRMobile phone home

RDial name

RSave nameRSave numberRSave telephone/phone number

RAcceptRAccept nameRAccept phone numberROkayRFinished

R<1> – <6>RSelect 1 – select 6RNumber 1 – number 6

Audio and Video Commands

RAudio

Radio

RRadio on

R87 9 megahertz - 107 9 megahertzR87 point 9 to 107 point 9R87 point 9 megahertz to 107 point 9

megahertzRFrequency 87 9 to frequency 107 9RFrequency 87 point 9 to frequency 107

point 9RFrequency 87 point 9 megahertz to

frequency 107 point 9 megahertz

RFM

RAM

RWeatherband

RNext stationROther stationRStation search

RStation <voice_tag>

RDelete station

RSave station

RSelect station

RList station listRRead out station list

RDelete station list

RPrevious stationRLast station

Command List 207

Voic

e Co

ntro

l

Z

Satellite Radio (SIRIUS XM)

RSatellite Radio on/SIRIUS on

RNext stationROther channel

RChannel <voice_tag>

RDelete channel

RSave channel

RSelect channel

RList channel listRRead out channel list

RDelete channel list

RLast channelRPrevious station

RNext categoryRPrevious category

RCategory <category name>

RSelect category

RList category listRRead out category list

RPrevious categoryRLast category

CD Changer

RCD changer

RNext CDROther CD

RPrevious CDRLast CD

RNext trackROther track

RPrevious trackRLast trackRRepeat/replay track

RCD 1 to CD 6RCD number 1 to CD number 6

RTrack 1 to Track 99RTrack number 1 to Track number 99

MP3

RMP3RMP3 changer (on)

RNext MP3ROther MP3

RPrevious MP3RLast MP3RRepeat/replay MP3

RNext directoryROther directory

RPrevious directoryRLast directory

RNext trackROther track

RPrevious trackRLast trackRRepeat/replay track

208 Command ListVo

ice

Cont

rol

RTrack 1 to Track 99RTrack number 1 to Track number 99

RMP3 1 to MP3 6RMP3 number 1 to MP3 number 99

Hard Disk

RHard diskRMusic register

Memory Card

RMemory card

DVD Audio

RDVD audioRDVD audio changer on

RNext DVD audioROther DVD audio

RPrevious DVD audioRLast DVD audio

RNext directoryROther directory

RPrevious directoryRLast directory

RNext groupROther group

RPrevious groupRLast group

RGroup 1 to 9RGroup number 1 to 9

RNext trackROther track

RPrevious trackRLast trackRRepeat/replay track

RTrack 1 to Track 99RTrack number 1 to Track number 99

RDVD audio 1 to DVD audio 6RDVD audio number 1 to DVD audio

number 6

Aux

Audio aux

Video

RVideoRDVD video

Command List 209

Voic

e Co

ntro

l

Z

Troubleshooting

Problem Possible Cause/Consequence

Suggested Solutions

Voice control doesnot understandyou.

You have notoperated thesystem from thedriver’s seat.

X Only operate the system from the driver’sseat.

You have spokentoo exaggeratedly,too loudly or tooquietly.

X State the commands coherently and clearlywithout exaggerating.

A blower is set toits highest settingor there is windnoise through anopen window.

X Prevent loud noises from interfering.

An address bookentry without aspeaker-dependent voicetag is notrecognized.

The fields in theaddress book entryfor the last nameand first name areboth filled in, butyou only said thefirst name or thelast name.

X Say the last name and then the first name ofthe address book entry in full.

The names enteredin the addressbook do not soundsufficientlydifferent, or are notpronounced asthey are written.

X Make sure the address book entries areplausible.

Check the address book entries for thefollowing:RThe name entries, e.g. last name and first

name, are in the right fields.RDo not use abbreviations or acronyms.RAvoid unnecessary spaces in names.RDo not use special characters.

210 TroubleshootingVo

ice

Cont

rol

Problem Possible Cause/Consequence

Suggested Solutions

An address bookentry without aspeaker-dependent voicetag is notrecognized.

The names enteredin the addressbook do not soundsufficientlydifferent, or are notpronounced asthey are written.

X Create a speaker-dependent voice tag.orX Give the “List address book” command.

The system reads out the address book.X Vehicles with Voice Control buttons on the

Multi-function Steering Wheel: Pressthe ? button when the name you want isread out.

orX Vehicles with Lever for Voice Control: Pull

the Voice Control lever toward you

The sound of thevoice tags in theaddress book is notsufficientlydifferent.

X The voice tags entered in the address bookmust sound as different as possible, e.g. storethe names White and Wright as “Mr Whiteoffice” and “Mr Wright John”.

orX Give the “List address book” command.

The system reads out the address book.X Vehicles with Voice Control buttons on the

Multi-function Steering Wheel: Pressthe ? button when the name you want isread out.

orX Vehicles with Lever for Voice Control: Pull

the Voice Control lever toward you

Troubleshooting 211

Voic

e Co

ntro

l

Z

Problem Possible Cause/Consequence

Suggested Solutions

A station list entryis not recognized.

The voice tags forthe stations in theaddress book donot soundsufficientlydifferent.

X Save a speaker-dependent voice tag for thestation (page 196).

orX Give the “List station list” command.

The system reads out the station list.X Vehicles with Voice Control buttons on the

Multi-function Steering Wheel: Pressthe ? button when the station you want isread out.

orX Vehicles with Lever for Voice Control: Pull

the Voice Control lever toward youThe station is selected (Y page 200).

If you are makingspeaker-dependent voicetags, the systemprompts you toenter them severaltimes.

The two voice tagsdiffer from eachother.

X Say the voice tag with the same intonationboth times.

Help Function Voice control has a comprehensive helpfunction to assist the user.The voice control help function provides:Rgeneral information about how best to

operate voice controlRa list of the possible commands

“Help Voice Control”You can use the “Help Voice Control”command to obtain information about howbest to operate voice control.

“Help”If you press the ? button and say thecommand “Help”, you will receive help for theapplication currently selected.

If you select the “Help” command during avoice dialog, for example after the “Dialnumber” command, you will receive helpexplaining how the dialog continues.You can also request the help function for aspecific system, for example with the “Helpphone” command.If you have activated the help window, you willsee a selection of the possible commands onthe display (Y page 41).

212 TroubleshootingVo

ice

Cont

rol

Overview ............................................ 214Emergency Calls ............................... 214Roadside Assistance ........................ 214Information Calls .............................. 215Search & Send ................................... 215

213

Tele

Aid

Overview

Vehicle Equipmenti This Operator’s manual describes all

features, standard or optional, potentiallyavailable for your vehicle at the time ofpurchase. Please be aware that yourvehicle might not be equipped with allfeatures described in this manual.

The Tele Aid System

(Tele Aid – Telematic Alarm Identification onDemand)The Tele Aid system consists of three typesof response:Rautomatic and manual emergencyRRoadside AssistanceRInformationRSearch & Send

i Tele Aid is only available in the US.

Emergency Calls

AutomaticallyAn emergency call is initiated automaticallyfollowing an accident in which the emergencytensioning devices (ETDs) or air bags deploy.

Initiating an Emergency Call ManuallyX Briefly press SOS button cover to open.X Press SOS button (for longer than 2

seconds).The indicator lamp in the SOS button willflash until the emergency call is concluded.

X Wait for a voice connection to theResponse Center.

X Close cover after the emergency call isconcluded.

i During the emergency call messageEmergency Call Activated is displayed,operation from COMAND is not possible.

For a complete description and additionalinformation on Emergency calls please referto the vehicle Operator's Manual.

Roadside Assistance

The Roadside Assistance button º islocated in the overhead control panel.

X Press and hold Roadside Assistance Buttonº (for longer than 2 seconds).A call to a Mercedes-Benz RoadsideAssistance dispatcher will be initiated. Thebutton will flash while the call is in progress.

X Describe the nature of the need forassistance.

For a complete description and additionalinformation on Roadside Assistance callsplease refer to the vehicle Operator's Manual.

214 Roadside AssistanceTe

le A

id

Information Calls

The Information button E is located in theoverhead control panel.

X Press and hold Information button E(for longer than 2 seconds).A call to the Customer Assistance Centerwill be initiated. The button will flash whilethe call is in progress.

For a complete description and additionalinformation on Information calls please referto the vehicle Operator's Manual.

Search & Send

i In order to utilize Search & Send yourvehicle must be equipped with Tele Aid,Navigation, and an active Tele Aidsubscription.

“Search & Send” is a navigation destinationaddress entry service. A destination addresslocated using Google Maps® or Yahoo LocalMaps® websites can be delivered via Tele Aiddirectly to the Navigation system in yourvehicle.

Specify and Send a DestinationAddress

i Please refer to any specific instructionsprovided by either website regardingentering or sending an address. Each

website functions differently and is subjectto change.

X Go to maps.google.com ormaps.yahoo.com and enter a destinationaddress in the address entry field.

X Depending on which website you are using,click on the appropriate button to send thedestination address to your Tele Aidaccount email address.

X Enter the email address you specified whenyou activated your Tele Aid account in theappropriate field when the “Send” dialogbox appears.

X Click “Send”.

Retrieve Destination AddressX Press the Tele Aid Information button to

begin the download of the destinationaddress to your vehicle's navigationsystem.

i If you have sent more than onedestination address to your vehicle youmust make one Information call for eachdestination address download.

X Select Yes when the message appearsasking if you would like to start navigation.This will open the start navigation screen(Y page 68).

Search & Send 215

Tele

Aid

Z

X Select Start.orX Select No if you wish to save the

downloaded destination address in theFrom Memory destination list for futureuse.

i Destination addresses will download inthe same order they were sent. If you havemultiple Mercedes-Benz vehicles equippedwith Tele Aid and active accounts, eachdestination address sent will be retrievableby all vehicles associated with the e-mailaddress you specified for your Tele Aidaccount.

216 Search & SendTe

le A

id

We reserve the right to modify the technicaldetails of the COMAND system as given in thedata and illustrations of this Operator’sManual.Press time: 09/26/2008Reprinting, translation and copying, even ofexcerpts, is not permitted without priorauthorization in writing.Title illustration no. P00.01-3654-00 orX03. 971.303

Order no. 6515 6838 13 Part no. 251 584 38 82 Edition C 2009