Storage capacity : 12,000 measurement pointsWith or without 1-line display

Class 100temperature and humidity dataloggers

Class 200temperature and humidity dataloggers

Temperature - KT 100 1 internal sensor - with or without input for external probeExternal probes temperature, current, voltageMeasuring ranges -40°C to +70°C and -40°C to +120°C (external)Resolution 0.1°CIP 40 or IP 67 housing protection

1 internal sensor - 4 inputs for external probesExternal probes temperature, current, voltageMeasuring ranges from -40°C to +70°C and from -40°C to +120°C (external)Resolution 0.1°CIP 40 or IP 67 housing protection

3 internal sensors - 2 inputs for external probesExternal probes temperature, current, voltage

Measuring ranges from 5 to 95%RH, -20°C to +70°C or -20°C to +80°C,-40°C to 120°C (external) and 0 to 10000 lux

Resolution 0.1%RH, 0.1°C and 1 luxIP 40 or IP 67 housing protection

Temperature / Humidity / Light - KH 200

Temperature - KT 200

Storage capacity : 16,000 measurement pointsWith or without 2-line display

3 internal sensorsParameters humidity, temperature and light

Measuring ranges from 5 to 95%RH, from -20°C to +70°C, from 0 to 10000 luxResolution 0.1%RH, 0.1°C and 1 lux

IP 40 housing protection

Temperature / Humidity / Light - KH 100

Data collector(storage capacity of500,000 values).

Portable printer fordata collector

PT100 andthermocoupletemperatureprobes

Ammeterclamps from

0-20 A to 0-600 A

Temperature •Humidity •

Light •Voltage •

Current •

Temperature •Humidity •

Light •Voltage •

Current •

KILOG CFRsoftware in accordancewith 21 CFR part 11standards

2

3

PT100 remote probe2 inputs for external probesExternal probes temperature, current, voltageMeasuring range from -100 to +400°CResolution 0.1°CIP 67 housing protectionSuitable for prevention of Legionella risks in water systems

PT100 Temperature - KTR 300

Thermocoupletemperature - KTT 300

Thermocouple K, J, or T remote probe2 inputs for external probes

Measuring rangesfrom -200°C to +400°C T

-100°C to +750°C J-200°C to +1000°C K

Resolution 0.1°CIP 43 housing protection

Ambient and remote probe PT100 and capacitiveWith 2 or without internal sensors

1 or 2 inputs for external probesDew point temperature

External probes temperature, current, voltageMeasuring ranges 0 to 100%RH, -20°C to +70°C or

-20°C to +120°C or -40°C to +180°C,and -100 to +400°C (external)

Resolution 0.1%RH, 0.1°CIP 54/ IP 67 housing protection

PT100 Temperature /Humidity - KTH 300

Probesand accessories

KISTOCKdata processingsoftware

Ideal for food produce, archive material or any goodssensitive to environmental conditions...4 specific ranges

to meet all your applications.

Hygrometryprobes -40 to

+180°C

Class 300temperature and humidity

dataloggersStorage capacity : 100,000 measurement points

With 2-line display

0-10 V voltage and 0/4-20 mAcurrent input cables

Wall-mountingbracket with anti-theft system andmagnetic fixing

1- Easy configuration.

2- Fast data download : 1,000values/second via USB 2.0 cable.

3- Data processing or data acquisition in real time.

5

From 0 to 100%RH and from -40 to +180°C.Polycarbonate or stainless steel probe, standard or

remote (lengths available 100 mm, 150 mm or 300 mm)with 2m cable.

PTFE or stainless steel sintered tip, protective plastichead, stainless steel perforated head.Functions : relative and absolute humidity, wet and dry

temperature, dew point, enthalpy.

Temperature / Humidity - TH 200

Class 200for HVAC and process

Remote probe

Common features Configuration via keypad, remote control and software

Advanced calculation functions Simultaneous display of 2 parameters 2 Configurable relays with visual alarm 18-30 Vdc or 24 Vac/Vdc power supply 2 4-20 mA or 0-10 V analogue outputs 1 RS 232 output With or without display ABS housing

Connected to DEBIMO measuring blades, and with SQR 2function, CP200 can control air velocity and airflow in a duct,

from the differential pressure.

Airflow - Air Velocity - SQR 2 option

Pressure - CP 200From 0/+100 Pa to -2000/+2000 mbar.

Manual auto-zero.Barbed or compression fittings.

Functions : pressure, air velocity, airflow,integration of pressure measurement,

measurement correction factor,temperature compensation.

Air Velocity - CTV 200

From 0-1 m/s to 0-20 m/s and from 0 to +50°C.Stainless steel remote probe (150 or 300 mm long.)Functions : air velocity, airflow, measurement

correction factor.

Pressure •Temperature •

Humidity •Velocity •

Airflow •

Pressure •Temperature •

Humidity •Velocity •

Airflow •

PressureFrom 0/+1000 Pa to

-5000/+10 000 Paand -1000/+2000 mbar.

TemperatureFrom 0 to +50°C (ambient)From -20 to +80°C (duct

mount or airtight probe)Depends on Pt100 probe

(on terminal block)

Air VelocityFrom 0 to 30 m/sFrom 0 to +50°C

Duct mount orremote probe

(150 or 300 mm long.)

Temperature / HumidityFrom 0 to 100%RHFrom -20 to +80°C

Probe type : standard, remote, duct mount or ambient

Humidity

From 0 to 100%RH

Class 50 and Class 100for HVACCommon features

Air tight model Terminal block model

Ambient model model Duct mount model

Duct mount model

Monostatsfor HVAC

From 0 to +50°C (ambient)From -20 to +80°C (airtight)

Depends on Pt100 probe (on terminal block)

From 0 to100%RH, from 0 to+50°C (ambient) orfrom -20 to +80°C(duct mount orremote probe).

From -500/+1000 Pa to-1000/+2000 mbar.

Manostats - PST

Hygrostats - HSTThermostats - TST

Remote probe model

Duct mount model

Airtight model Ambient model

Common featuresConfiguration via DIP switch and software

18-30 Vdc or 24 Vac/Vdc power supplySPDT relay (Single Pole Double Throw)

With displayABS housing

Configuration via DIP switch and software18-30 Vdc or 24 Vac/Vdc power supply

4-20 mA or 0-10 V analogue outputsWith or without displayABS housing

4

6

Temperature / HumidityTH 300

PressureCPA 300

From 0/+10 Pa to -10 000/+10 000 PaSelf-calibration liBarbed connectionsFunctions : pressure, air velocity, airflow, integration of pressure measurement, measurement correction factor, automatic or manual temperature compensation (thermocouple K input).

From 0-100%RH and -40 to +180°CFunctions : relative and absolute humidity, wet and dry temperature, dew point, enthalpy.Polycarbonate or stainlees steel probe, standard or remote probe(lengths available 100 mm, 150 mm or 300 mm) with 2m cable.

Stainless steel or PTFE sintered tip, protectiveplastic head, stainless steel perforated head.

Class 300for HVAC and process

ABS model

Temperature / HumidityTHA 300

Common features

Standard probe model

Configuration via keypad, remote control and softwareInterchangeable probesAdvanced calculation functions

Display of 4 parameters simultaneously2 or 4 configurable relays with visual alarm

24 Vac/Vdc or 230/115 Vac power supply2 4-20 mA or 0-10 V analogue outputs

1 RS 232 outputRS 232 connection and RS 485 Modbus network

With or without digital displayStainless steel or ABS housing

Connected to DEBIMO measuring blades, and with SQR 2function, CP200 can control air velocity and airflow in a

duct, from the differential pressure.

Airflow - Air Velocity - SQR 2 option

PressureCP 300

Pressure •Temperature •

Humidity •Velocity •

Airflow •

Pressure •Temperature •

Humidity •Velocity •

Airflow •

7

Class 300flush-mount

Designed to measure and monitor cleanrooms,this model is perfect for flush-mounting in a

wall or a panel.

From -100/+100 Pa, -500/+500 Pa, -1000/+1000 Pa Front made of brushed stainless steel or white lacquered

Outputs : 4-20 mA or 0-10V and RS 232 Configuration via software or infrared remote control

Power supply : 24 Vac/Vdc

Flush-mount pressure sensor - CPE 300

Face calibration : innovative system whichallows you to connect your transmitter (wheninstalled) to a dynamic pressure calibration

bench.

Via RS232 connection, CPE300 can displayalternatively (in addition to the pressure) other

parameters such as temperature and humidity froma TH200 transmitter for example.

Modbus network (RS 485system)

Pt 100, Pt 1000 Thermocouple K, J, T

Head type : threaded, with metallic protection, DIN B, plastic, standards...

Type of probe : contact, food, soft (to be glued), penetration, insulated sheath...

Cables : PVC, Teflon, sheathed, glass silk...

Head holder andoutput on cable

Temperatureprobes

Via current or voltage input cable,ATT300 display can be connectedto any type of transmitter :

pressure, humidity, temperature,airflow, air velocity...

Large display - ATT 300

Common featuresRS 232 communication and RS 485

Modbus network24 Vac/Vdc power supply

Pre-programmed measurement units

Can display up to 3 parameters(example : humidity, temperatureand pressure). Can be installedflush-mounted or wall-mounted.

Multi-channelflush-mount display - ATE 300

DisplaysRegulators

Mounting accessories :clamps, sliding

connections, spikes...

8

5 measuring ranges available between 0 ±1000 Pa and 2 barManual zero and autozero, or self-calibrationAir velocity and airflow with Pitot tube or Debimo blades2 thermocouple K channels from -200 to +1300°CUp to 8,000 measurement points, output for printerand PC connection

Vane anemometer from 0.20 to 35 m/s, -20 to +80°CHotwire anemometer from 0.00 to 30 m/s, -20 to +80°CAirflow function (in duct or with cones)2 Pt100 channels from -100 to +400 °CUp to 8,000 measurement points, output for printerand PC connection

MicromanometersClass 100/200 MP

AnemometersClass 100/200 LV and VT

Range from 60 to 50,000 RPM and 4 to 2500 m/minOptical or contact probe

Relative humidity from 5 to 95%RH and from 3 to 98%RHAmbient, wet and dry temperature from -20 to +80°CAbsolute humidity, dew point, surface and ambient2 Pt100 channels from -100 to +400°CUp to 8,000 measurement points, output for printerand PC connection

TachometerClass 100 CT

HygrometersClass 100/200 HD

Pressure •Temperature •

Humidity •Velocity •

Airflow •Tachometer •

Pressure •Temperature •

Humidity •Velocity •

Airflow •Tachometry •

MultifunctionsClass 300 AMI and VT

Common featuresEvolutionary, these instruments can measure several parameters

simultaneously. Their SMART PRO probes are automaticallyidentified by the instrument and are interchangeable.

Accessoriesfor portable instruments

SMART PRO PROBESDedicaced to Class 200/300 portable instruments, these

probes are interchangeable and are automatically reco-gnized by the instruments. These probes come withadjustment certificate.

Class 300 AMIMicromanometer from 0 to ±1000 Pa or from 0 to ±1000 mmH2O

Vane anemometer from 0.20 to 35 m/s, -20 to +80°CHotwire anemometer 0.00 to 30 m/s, -20 to +80°C

Hygrometer from 3 to 98%RH, -20 to +80°C2-channel Pt100 thermometer from -100 to +400°C

2-channel thermocouple K from -200 to +1300°CTachometer from 60 to 50,000 RPM and from 4 to 2500 m/minAir velocity and airflow with Pitot tube and with Debimo blades

from 2 to 40 m/s or 4 to 100 m/sUp to 8,000 measurement points, output for printer

and PC connection

Class 300 VTVane anemometer from 0.20 to 35 m/s, -20 to +80°CHotwire anemometer from 0.00 to 30 m/s, -20 to +80°CHygrometer from 3 to 98%RH, -20 to +80°C

2-channel Pt100 thermometer from -100 to +400°C2-channel thermocouple K from -200 to +1300°CTachometer from 60 to 50,000 RPM and from 4 to 2500 m/minUp to 8,000 measurement points, output for printerand PC connection

Thermocouple K temperature probesPitot tubes with or without temperature compensationPrinterData processing softwareProtective cover and protection hands-free holderAirflow conesDebimo blades...

Vane probes ø 100, 70 and 16 mmHotwire probesTelescopic hotwire probesHygrometry probesOptical and contact tachometry probesAirflow conesPt100 temperature probes

9

10

From 85 to 4000 m3/h6 sizes of hoods

Supply and exhaust

FlowmeterDBM 700

From 10 to 1200 m3/h4 sizes available :

200 x 200 mm, 300 x 300 mm, 450 x 450 mm, 550 x 100 mm

Installed on hotwire and vane anemometers, theymeasure airflow directly on vent grilles.

Airflow conesfor portable anemometers

20 sizes from 100 to 3000 mmNPL type, as per AFNOR standard

316 L stainless steel

Pitot tubes

Pitot tubesand DEBIMO measuring blades

Temperature •Velocity •

Airflow •

Temperature •Velocity •

Airflow •

From -200 to +1300°C2 thermocouple K and 2 Pt100 channels

Storage of values, interface for printer and PC connection

Class 200Thermometers

ThermometersPortables

Airflow cone for vaneprobe diam. 100 mm

anemometer.

With or without temperaturecompensation

Lengths available from 100to 3000 mmFrom 3 to 100 m/s

Debimo blades

Thermocouple K (from -200 to +1300°C) orPT100 (from -100 to +400°C)1 and 2 channelsSupplied with or without probe

Class 100Thermometers

DBM 700 is the key tool for balancing : itallows you to check airflow on any type of

grilles and onlarge air diffusers.

From the dynamic pressure measured in a duct,Pitot tubes and DEBIMO allow you to calculateair velocity and airflow.

A wide range of accessories is available to fit any installation withproper connections.

Liquid for manometersTube, junctions

Pressure connections, wall-crossing connection

Manometersliquid column

Accessoriesfor manometers

Pressure •Velocity •

Airflow •

Pressure •Velocity •

Airflow •

Allow you to read apressure measurement

and to activate a relay whensetpoint is passed.

From -500 to +500 Paand from -1000 to +1000 mbar.IP 65 protection

ECM - Mano-Pressostats

These models allow you to read a pres-sure measurement and to activate 1 or 2electrical relays, with a great accuracy andrepeatibility.

From 0-10 to 300 mmH2O230 Vac, 115 Vac and 24 Vac/Vdc power supply

Manual configuration of setpoint

Manostats

ManoPressostats

11

For very low differential pressure

Inclined manometers

From 0-5 to 0-100 mmH2OCentre 0 scale

Scale available in mmH2O, Pa, DaPa...

From 0-100 mmH2O to 0-2,6 barDirect reading or reading byaddition of columnsScale available in mmH2O, DaPa, mbar...

Vertical manometersFor high differential pressure with com-pact sizes.

Distributed by : IHSA - Ingenierííííííia en Higiene Seguridad y Ambiente 5411 49319133 IHSA@sion.com

Calibrations are carried outas per ISO 9001 standard pro-

cedures, and certificates areissued accordingly (as per

AFNOR standard).

Pressure

Temperature

Airflow

Tachometry

Air velocity

Humidity

KIMO designs, manufactures and sells instruments for measuring and monitoring airparameters in HVAC and industry. With 27-year experience, KIMO offers a large range of

products for your air / heating / refrigeration systems.

Non

-con

trac

tual

doc

umen

t -

We

rese

rve

the

right

to

mod

ify t

he c

hara

cter

istic

s of

our

pro

duct

s w

ithou

t pr

ior

notic

e.

C

ATA

LOG

UE

GE

NE

RA

LE

XP

OR

T-

V1

- A

ngla

is -

04/

06

Boulevard de Beaubourg BP 48EMERAINVILLE - F-77312 MARNE LA VALLEE

Tel + 33 (0)1 60 06 69 25Fax + 33 (0)1 60 06 69 29

With a new factory of 4,000 m2 and high-tech produc-tion units, our team of 140 people has one goal :

satisfy your needs.

Our new laboratories of 600 m2 are dedicated to cali-bration, adjusting and controls of our instruments;

they are equipped with modern calibration benchesregularly checked.