Home
Documents
MEMS FOR AUTOMOTIVE SAFETY APPLICATIONS...−DSI3/PSI5 V2.1/SPI/I2C compatible. −Versatility of...
1 36
100%
Actual Size
Fit Width
Fit Height
Fit Page
Automatic
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2017 NXP B.V. PUBLIC SYSTEMS ENGINEER KISHORE PENMETSA MEMS FOR AUTOMOTIVE SAFETY APPLICATIONS AMF-AUT-T2762 | AUGUST 2017
MEMS FOR AUTOMOTIVE SAFETY APPLICATIONS...−DSI3/PSI5 V2.1/SPI/I2C compatible. −Versatility of Data Output: Raw/Low Pass Filtered/High Pass Filtered data, temperature Data. −10
Upload
others
View
17
Download
0
Embed Size (px)
344 x 292
429 x 357
514 x 422
599 x 487
Citation preview
NXP Powerpoint template confidential 16:9 WidescreenNXP and the NXP
logo are trademarks of NXP B.V. All other product or service names
are the property
of their respective owners. © 2017 NXP B.V.
PUBLIC
• Functional safety considerations
• Applications Use case
• Evaluation Tool Demonstration
PUBLIC 4
• 15 UMEMS Designs
− Three g-ranges (low,med,high)
• 2 ASIC Designs (LL18UHV)
Differentiating Points
Configurable Sensor Range.
Extended Functional Safety Mechanism.
Product Features − Independent X-Axis, Y-Axis or Z-Axis Ranges for
each Channel
− Up to a 4th order Low Pass Filter with Rolloff Frequency Options
from 12.5Hz to 1500Hz.
− DSI3/PSI5 V2.1/SPI/I2C compatible.
− Versatility of Data Output: Raw/Low Pass Filtered/High Pass
Filtered data, temperature Data.
− Data Size range from 10bits to 16bits.
− Extended Functionnal Safety capability.
− Acceleration range: 1.5 – 480 g
− 3.3V to 20V supply voltage
− Output sampling rate depending of used communication protocol up
to 4.38kHz (PSI5).
Typical Applications − Safety
Electronic Stability Control Sensor
Availability
The purpose of the Gen 6 product portfolio is to:
• replace the existing Gen 4 portfolio of devices with feature
enhanced and cost
reduced devices
Gen 4
devices Function
Gen 4
g-range
Mesquite
Sycamore Dual Channel XY SPI Main ECU crash sensor 20 to 125g
Thornapple 15g to 150g
Oroya Single Channel X or Z PSI5 Satellite Crash Sensor 60 to 480g
Laurel 50g to 480g
Cardon
Agave3
Single Channel X or Z DSI2/3 Satellite Crash
Sensor 25 to 375g Laurel 15g to 480g
Opuntia Dual Channel XY SPI Low g Main ECU ESC Sensor 3.5 to 5g Low
g Dual 1.5g to 20g
Colossus
Titan
Crash Sensor 1.5g to 8g
Med / Low g
• PSAT – Pressure Sensor Satellite
− Engine Management BAP application
− Engine Management MAP application
− Engine Management Turbo application
− Engine Management LPG applications
• Film assisted molding technology
Sample now for PSAT
PUBLIC 8
Product Features
− 40 kPa – 140 kPa Absolute Pressure Range
− Selectable 370Hz, 2-Pole or 400Hz, 3-Pole Low Pass Filter for
Absolute Pressure
− DSI3/PSI5 V2.1/SPI/I2C compatible.
− Versatility of Data Output: Raw/Low Pass Filtered/High Pass
Filtered data, temperature Data.
− 10 bit data length for relative pressure
− Extended Functional Safety capability.
− 3.3V to 20V supply voltage
Typical Applications
Availability : Sampling now !
02.
• Temperature Range: -40 C to 125 C
• Internal Oscillator with Verification via External COUNT Register
Access
• Digital Signal Processing
− C2V, Sigma Delta Modulator and Sinc Filter
− Low Pass Filter options from 25 Hz to 1500 Hz, up to 4-pole
− Optional 0.04Hz Offset Cancellation High Pass Filter with
selectable output rate limiting
• DSI3 Compatible
− Command Response Mode (CRM) for device configuration
− Periodic Data Collection Mode (PDCM) for normal acceleration data
transfers.
− Optional Background Diagnostic Mode during PDCM
• AKLV27 Compatible, PSI5 V2.1 Compatible, Airbag Substandard
− PSI5-P10P-500/3L and PSI5-P10P-500/4H data transmission
− High Speed customer programmability through PSI5 interface
− Daisy chain support with external switch
• 32-bit SPI
− Error Detection via CRC Status and Source Identification
• Independent Arming Functions for each channel
− Up to a 16 sample Moving Average calculated on offset cancelled
data
− 2 Independent Programmable Thresholds per channel up to ±25% of
full scale
Transducer
• X-Axis and Z-Axis UMEMS (Unique Range for each Channel)
• Bidirectional Self Test, Independently Controlled for each
Channel
Package
• 16 pin QFN 4 mm x 4 mm x 1.45 mm
• Inspectable Solder Joints
− 40kPa – 140kPa Absolute Pressure Range
− -40C – 125C Operating Temperature Range
• ASIC
− Temperature range: -40°C – 125°C
− DSP Chain
370 Hz, 2-Pole LPF for absolute pressure
0.16Hz, 1-Pole LPF for P0 value
10-Bit P/P0 output
− Sensitivity error: +/- 7%
− DSI3, PSI5-v2.1 compatible
− AKLV29 v1.3 compatible
− Pressure Range : 40kPa – 140kPa
• PACKAGE
− Pb free 4mm X 4mm X 1.98mm Cavity QFN (FAM)
PUBLIC 12
− Crash detection
− Electronic Stability Control
− Electric Parking Brake control
− > Crash detection
PUBLIC 15
Arming Function
Used as a safety mechanism to verify decisions made by other
devices in the system using the sensor data.
• Mode:
For more information about DSI3 protocol :
http://www.dsiconsortium.org/securepage.php
• GEN6 products are compatible with the new DSI3 industry standard,
revision 1.00.
• Address Assignment
− Discovery mode
• Command and Response Mode (CRM)
− Complete self test.
− Configure the device
− Locked configuration to prevent any change
− Continuous Data transmission.
For more information about PSI5 protocol :
http://psi5.org/specification/
• GEN6 products are compatible with the AKVL29 V2.1 industry
standard which requires PSI5 V1.3 compatibility
• Initialization
− Initialization phase 2 data is transmitted as specified in AKLV29
V1.3. All 32 data fields are transmitted 4 times.
− Initialization data includes:
The protocol revision
The sensor manufacturer
The sensor type
A production date code
A serial number
• The initialization data is determined by the satellite module
supplier and thus user programmable in NVM.
• Continuous Data Transmission
Synchronous/Asynchronous Parallel Mode
10-16 Bit Data.
Parity/CRC Error Detection
500ms repetition rate
125/189kBaud bit rate
−Device Initialization
Multiples data sources
Sensor data request
• Safety Mechanism:
− Activity or technical solution to detect / avoid / control
failures or mitigate their harmful effects.
− The safety mechanism is either able to switch to or maintain the
item in a safe state or able to alert the driver such that the
driver is expected to control the effect of the failure.
• Safety Goals
− Determined for each hazardous event
− ASIL determined for the hazardous event is to be assigned to the
corresponding safety goal.
PUBLIC 21
• Hazard analysis
• Determine ASIL
• Functional safety concept :redundancy concept comprising a
control channel and an independent monitoring channel.
PUBLIC 23
− Over/Undervoltage monitoring
− Self-Test verification
− Temperature monitoring
− 2 bits status field with each SPI command
− Register read verification
• DSI3 Safety Mechanism
− 4 bits status field with each DSI3 command
− Register read verification
• PSI5 Safety Mechanism
− Automatic Self-test
− 1 Parity bit / 3 bits CRC with each sensor data
transmission
PUBLIC 24
Excerpt from Safety Manual – DSI3 Safety Mechanisms
PUBLIC 25
Low-g
Z
Low-g
Z
• Overview
− For the automotive side airbag system, the Thornapple device is
typically mounted inside the vehicle front/back bumpers.
− Sensor Data is transmitted from the device to a main controller
for data processing via a 2- wire communications interface that
also supplies power.
• Sensor Data
− The main sensor data transmission necessary for the automotive
side airbag system is 1 axis acceleration, transmitted as offset
cancelled acceleration in g.
− The acceleration is provided by either DSI3, PSI5 with
10-bit,12-bit or 16-bits precision.
− The required acceleration range from 50g to 500g depending of the
sensor’s location.
• Vehicle locations
PUBLIC 28
• Overview
− The device is typically located in the passenger compartment to
sense the vehicle tilt,
− Sensor and main controller are located on the same module.
• Sensor Data
− The main sensor data transmission necessary for the automotive
side airbag system is 2 axis acceleration, transmitted as
acceleration in g.
− The acceleration is provided by either SPI or I2C with 12-bit or
16-bits precision.
− The required acceleration range for rollover application can vary
from 1.5g to 20g.
• Vehicle locations
PUBLIC 29
• Overview
− PSAT_DBAP1 can be used as a remote relative pressure sensor in an
automotive airbag system. The device is typically located in the
vehicle door to sense the rapid pressure changes due to a vehicle
door intrusion for the purposes of side airbag deployment. Sensor
Data is transmitted from the device to a main controller for data
processing via a 2- wire communications interface that also
supplies power.
• Sensor Data
− Relative pressure, transmitted as DP/P0 is required for crash
detection.
− P0 is an average value of the absolute pressure using a low pass
filter that limits the P0 change to ~0.4kPa/s. DP is calculated by
subtracting the P0 from the absolute pressure value.
− On Startup it is necessary to transmit the average absolute
pressure. Some DSI3 systems may also require a method to
continuously transmit both absolute pressure and relative pressure.
Some DSI3 systems may require a method to transmit the device
temperature either on startup, continuously, or both.
• Vehicle locations
− For the automotive side airbag system, the PSAT_DBAP1 device is
typically mounted inside the vehicle door cavity with the pressure
port facing outward.
− In this location, the operating temperature requirement is -40°C
to +105°C.
• Advantages over Accelerometer
− Fast firing decision
• Pressure satellites are used in the front bumper
for pedestrian protection
• Idea is to detect a change in pressure due to a
collision with a human, then raise the bonnet or
add an airbag for soft landing to protect the
body.
NXP Automotive Sensor Evaluation Freedom Evaluation Platform for
NXP Automotive Sensor
X-FRDM-QFN4SKT-A X-FSLGEN6SKTIACC FSLGEN6SKTPRES
− PSI5 V2.1.
NXP Automotive Sensor Evaluation
I2C0
I2C1
Sensor
Interface
Range
LPF
Tool & Hardware available upon request
LOAD MORE