Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Megashor Ultra heavy-duty shoring
Megashor
Heavy duty modular propping system designed
for axial loads of up to 750kN.
Megashor: Features and Benefits
• High Load: Up to 750kN per leg and 3,000kN per tower.
• Unlimited Options: Can be assembled into props, towers, trusses and
various other shapes.
• Flexibility: Superslim Soldiers provide restraint to Megashor and they can be
used at various lengths and angles.
• Accessories: Megashors full range of accessories makes it highly versatile.
• Limiting Disruption: Megashor is approved for support of bridges that are
open to live traffic.
• Quality: Quality assured manufacturing process results in consistent
assembly alignment onsite, saving on modifications and labour cost.
Megashor: Where is it used?
• Heavy Duty Shoring
• New Bridge Construction
• Bridge Launching
• Bearing Replacement
• Façade Retention
• Propping
• Megatruss
• Travelling Slab and
Tunnel Formwork
Megashor: Used on Stadiums
Rectangular Stadium, Melbourne
Stadium Australia, Sydney
Megashor is frequently used in the
construction of stadiums throughout the
world, it is often used to support the
roof or trusses.
Stadium Construction
Suwon
Stadium,
Korea
Megashor: Some of its components
Megashor Legs Having nine leg sizes, ranging from 15 to
5,400mm means that Megashor can be
assembled into props, towers and trusses
of almost any length.
Four Leg
Support Tower Twin Leg Trestle Single Prop
Megashor can be used in single or multiple leg
support applications, both vertically or
horizontally. It can also be configured into
support trusses with varying depths and spans.
Megashor: Other Components
The Megashor Rocking Head is
used to connect components at
an angle.
Rocking Head
RMD Supper Slim Soldiers provide restraint for
Megashor. They are available in ten sizes, from 90 to
3,600mm, which provides the ultimate in flexibility
when planning the sizes of towers and centres of
props.
Super Slim Soldiers
WWL: 550 - 1000kN in
compression depending
upon height.
Range: 410-620mm max.
Screw Jack
Bracing Plate For spreading loads
and connecting
braces.
Header Beam Two sizes of 3,800
and 5,000mm.
Two sizes: long
1520 – 1835mm,
short 915 – 235mm.
Turnbuckles
Megashor: Key Components
• Jack:
420-610mm adjustment.
Carries full 1,000kN load.
• Rocking Head:
Up to 45 degree slope.
• Megatruss Node:
Easy assembly to truss.
• Superslim Soldiers:
Compatibility allows range extension.
The End