Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com
Key
25mm & 32mm (1’’ & 1 ¼”)20mm (¾”)15mm (½’’)
Description
Maintaining water levels in:• Animal drinking troughs• Water storage tanks
Flow Graph
• High flow• Compact robust construction• 20-60mm (¾” - 2½”) water level differential (increases as water pressure increases)• Positive on/off operation• Lock off with cord lock• 0.3 - 10 bar (5 - 150 P.S.I.) pressure rating• Inlet filter• Constructed from corrosion resistant materials• Under water installation helps avoid freezing• Valve is less prone to stock damage
Features
Applications
MEGAFLOW TROUGH VALVE SPECIFICATIONCODE
(e.g) A Megaflow Trough Valve with: ¾” bsp inlet thread, detach base, long tail thread has the following spec number: MFV 20 D LT NOTE: If no options are specified the standard ones will be supplied
Note: Before using check that under water mounting is allowed by local regulations.
Note: Product may differ slightly from these specs due to ongoing product development.
PRODUCT CODEINLET SIZE OPTIONS CODE
MFV ½’’ bsp/npt ¾” bsp/npt 1” bsp1” npt1 ¼” bsp1 ¼” npt
152025132114
Detach Base Long Tail Thread
DLT
MegaflowTrough Valve
Megaflow trough valves are float operated valves for use in automatic filling of water troughs. The valve isconfigured for underwater mounting only. The float is connected to the valve with a nylon cord, this operates a pilot valve, when the water level drops, the pilot valve is opened and the main diaphragm valve is activated. Megaflow is a good choice where its high flow, compact, robust, non corrosive construction is beneficial.
Long Tail: Supplied with backnut and seal washer½’’ Long Tail: 100mm long¾” Long Tail: 38mm long
Options
Inlet Size
Short Tail
Long Tail
Specifies this Thread size
Detach
BSP NPT
½’’ 1 ¼” ¾” 1’’ ¾” ½’’ 1’’ 1 ¼”
Mounting Positions
2.1
20
0 L
/ M
IN
MEGAFLOW TROUGH VALVEPRODUCT INFO
Megaflow Dimensions
20mm (3/4”) Short Tail25mm (1” ) bsp/npt short tail32mm (1 1/4”) bsp/npt short tail
15mm (1/2”) Long Tail20mm (3/4”) long tail25mm (1” )bsp⁄npt long tail32mm (1 1/4”) bsp⁄npt long tail
222225
100385460
mmDimension A inches
Tail Dimensions
7/87/81
41 1/22 1/82 3/8
Float Dimensions4 ⅝”
118mm
6 ⅝
” 16
8mm
45°
A 4 ½” 115mm
2”
51m
m
3 7/16” 88mm
1 13/16” 46mm
60ºC, 140ºFMaximum Operating Temperature
See “Tail Dimensions”
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com2.2
20
0 L
/ M
IN
Body
White Internal Parts
Filter
Diaphragm
Seal
Springs, Bolts, Nuts, Pin, Screws
Glass Filled Nylon
Acetal
PP/Nylon
EPDM
TPU
304 Stainless Steel
Actuator Cap
Detach Locking Ring
O’Rings
Float
Seal Washer
Float Cord
ABS
Acetal
Nitrile
HDPE
LDPE
Polyester
MaterialPart MaterialPart
MEGAFLOW TROUGH VALVEDIMENSIONS & MATERIALS
3
4
5
7
8
1
DESCRIPTION CODE 26g x 25 S/S Screw
Two Part Acuator Top
6g x 10 S/S Screw
Actuator Cap
Actuator Spring
Two Part Actuator Stem
6g x 25 S/S Screw
Valve Cap Assembly
MFP2050
MFP2041
MFP2010
MFP2020
MFP2030
MFP2042
MFP2050
MFP2060
1
2
3
4
5
6
7
8
2
6
1
DESCRIPTION CODE
1
2
1
2
MFP1010
MFP1020
Float
Float Cord
CODE: MFV
4
1
32
1
2
3
4
MFP1
MFP2
MFP3
Float Assembly
Cap & Actuator Assembly
Diaphragm Assembly
Detach Base Assembly
DESCRIPTION CODE
3
DESCRIPTION CODE
1
2
MFP3
TPP3010
TPP3011
Diaphragm Assembly
Pilot Flow Filter (Fine)
Pilot Flow Filter (Coarse)
1
2
NB: All Long Tail Assemblies are supplied with a Seal Washer and Backnut included
1
2
DESCRIPTION CODE 4Detach Base
BSP TailsShort Tail Assembly (BSP)
Detach Tail 20mm(3/4”) Short
Detach Tail 25mm(1”) Short
Detach Tail 32mm(1 1/4”) Short
Long Tail Assembly (BSP)
Detach Tail 15mm (1/2”) Long
Detach Tail 20mm (3/4”) Long
Detach Tail 25mm (1” bsp) Long
Detach Tail 32mm (1 1/4” bsp) Long
NPT Tails Short Tail Assembly (NPT)
Detach Tail 3/4” npt
Detach Tail 1” npt
Detach Tail 1 1/4” npt
Long Tail Assembly (NPT)
Detach Tail 1/2” npt Long
Detach Tail 3/4” npt Long
Detach Tail 1” npt Long
Detach Tail 1 1/4” npt Long
1
2
DTP1
DTP020
DTP025
DTP032
DTP015L
DTP020L
DTP025L
DTP032L
DTP0075
DTP0100
DTP0125
DTP0050L
DTP0075L
DTP0100L
DTP0125L
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com 2.3
20
0 L
/ M
IN
MEGAFLOW TROUGH VALVEPARTS IDENTIFICATION SHEET