Embed Size (px)
Citation preview
How to Use Your Surface Go
©2020 Scottsdale Unified School District 1
Meet your Surface Go
1. Volume
2. Power button
3. Windows Hello camera
4. Studio Mics
5. Headphone Jack
6. USB-C port
7. Kickstand
8. Surface Connect port
9. microSDTM card reader
Charge your Surface Go Power cords, like any other metal wire or cable, can be weakened or damaged if repeatedly twisted or bent in the same spot. Here are a few things you can do to keep your power cord from being damaged: Avoid twisting or pinching your power cord Don't wrap your power cord too tightly, especially around the power brick. Instead, wrap it using loose coils rather than tight angles.
Correct: Cables loosely wrapped Incorrect: Cables tightly wrapped
How to Use Your Surface Go
©2020 Scottsdale Unified School District 2
Inspect your power cord regularly, especially where it joins the power brick Avoid pulling on the power cord when unplugging your Surface. Gently removing the connector from the charging port can help prevent damage to your power cord. Correct: Unplugging gently Incorrect: Tugging on cord to unplug
All rechargeable batteries wear out eventually. Here is how to get the longest life from your battery: • Several times a week, let your battery drain below 50% before charging it. • Avoid having your Surface plugged in 24/7. • Store your Surface in a cool, dry room when you are not using it.
Take care of your touch screen
Scratches, finger grease, dust, chemicals, and sunlight can affect your touchscreen. Here are some tips
to protect it:
• Clean frequently. The Surface touchscreen is coated to make it easier to clean. You don't need to rub hard to remove fingerprints or oily spots. Use a soft, line-free cloth (either dry or dampened with water or eyeglass cleaner—never glass or other chemical cleaners) or a screen cleaning wipe to gently wipe the screen. Do not use disinfectant wipes on any Surface touchscreen. Never use disinfectant wipes, glass cleaner, or other chemical cleaners to clean the touchscreen of your Surface device.
• Keep it out of the sun. Do not leave your Surface in direct sunlight for a long time. Ultraviolet light and excessive heat can damage the display.
• Keep it covered. Close the cover when you are taking your Surface with you or when you're not using it.
How to Use Your Surface Go
©2020 Scottsdale Unified School District 3
Using Your Surface Go Power on your device by pushing the power button.
The Surface Go will take you through the initial setup.
1. Select Language: English
Select Region: United States
Select Keyboard: US
How to Use Your Surface Go
©2020 Scottsdale Unified School District 4
Second Keyboard: Skip
Let’s Connect you to a network: Choose a Wi-Fi network or hotspot
Welcome to Scottsdale Unified School District: Enter your [email protected]. Student ID is a 6-digit number. Ex: [email protected] (Note: this is not a valid email address, this is only for the Surface Go login.)
How to Use Your Surface Go
©2020 Scottsdale Unified School District 5
Sign in to Office 365/Teams Enter your [email protected]. Student ID is a 6-digit number. Ex: [email protected] (Note: this is not a valid email address, this is only for the Surface Go login.)
Go to Edge or Chrome browser
Single Sign On (signon.susd.org) It is highly suggested that all students change their password immediately. Click on “Password Reset”. Note: You can get to the password reset tool anytime by going to password.susd.org.
Steps to change your password:
1. Go to password.susd.org OR go to signon.susd.org and click on “Password Reset” under Additional Links
2. Click on Enroll (this is a one-time step that helps in future password reset) a. Enter student ID number and password b. Answer a few questions c. Click OK to close
3. Click on Change Password a. Enter student ID number and password b. Enter and confirm new password c. Click OK to close
How to Use Your Surface Go
©2020 Scottsdale Unified School District 6
Login to Single Sign On using Student ID and password.
Getting to Buzz From the SSO page, click on either EDL or Genius ICON.
This will take you to Genius.
Click on any course in the section titled Academic Snapshot
How to Use Your Surface Go
©2020 Scottsdale Unified School District 7
You are then directed to your Buzz splash page and will see all your courses.
