Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
MEDICAL gAS WALL OUTLETQUICK CONNECT
CHEMETRON® COMPATIBLE
l Accepts only Chemetron gas specific adaptersl Indexed to prevent interchangeability of gas servicesl Universal rough-in accepts quick connection (Chemetron®, Ohmeda®, Puritan-Bennett®) or DISS latch valve assembliesl Modular design capability l 100% hydrostatically tested l Complies with NFPA 99 and CGA G-4.1 standardsl UL Listed
FEATURES
SPECIFICATIONSl Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC®). Wall outlet shall be designed for concealed piping installation and available for services indicated.l The latch valve assembly shall be Chemetron quick connect compatible and accept only gas specific Chemetron type quick connect adapters. Each latch valve assembly shall be color-coded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1” for variations in wall thickness.l Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type "K" copper, 1/2” (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360º for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5” centerline spacing. A dust plug and cover shall be provided to protect rough-in assembly from contamination during handling and installation at the job site.l Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas system.l All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet.l Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed.
DIMENSIONS
Represented by:
Copyright © 2010, Genstar Technologies Co., Inc. Form No. 9-MS-CWO (Oct. 2010)
Genstar Technologies Company, Inc.4525 Edison AvenueChino, CA 91710, USATel: 909-606-2726 Fax: 909-606-6485 www.gentechealthcare.com
Technology for a Better Future
Dimensional Data Notes:A. Additional support needed if ganging more than 3 outletsB. Wall thickness may vary from 1/2” to 1” (12.7mm to 25.4mm).C. 1/2” O.D. (3/8” Nominal) type K copper inlet tube allows 360° swivel on outlet body for entry from any angle.D. Inch (mm)
ORDERINg INFORMATION
Ordering Information for Complete Wall Outlets (Includes Latch Valve Assembly, Trim Plate and Rough-in Assembly)Note: US colors listed. For ISO 32 colors replace “U” with “E” in the above catalog numbers.
3823U-O
3823U-V
3823U-A
3823E-2
3823U-W
3820-SLD
Oxygen
Vacuum
Medical Air
Nitrous Oxide
WAGD
Slide
MATERIAL
Cast Aluminum
Powder Coating
Latch Valve Rough-in Trim Plate
Stainless Steel
ABS Plastic
Neoprene
Steel+Plating
Copper
Aluminum
ABS Plastic
Steel/Brass+Plating
Stainless Steel
Brass
Neoprene
Rubber
Chemetron Compatible
gas Service Cat No. Qty
CHEMETRON Type
www.pahsco.com.tw
Medical Gas Outlets
PAHSCO® CHEMETRON Type medical gas outlets are integral to
medical gas supply system. PAHSCO® CHEMETRON Type Gas
Outlets comply with NFPA99 and CGA regulations and pass the
leak tests and connector stability checks. A package of medical gas
outlet includes finishing and rough-in assembly. In addition,
PAHSCO® CHEMETRON Type Gas Outlets are color-coded with
labels and marked with gas name according to NFPA 99 or ISO
7396. They can only connect to corresponding CHEMETRON Type
Quick Adapter. This is to prevent interchangeability of gas services,
hence ensures safety in medical supply. CHEMETRON Type Gas
Outlets are available in Wall and Console Types.
CHEMETRON TypeMedical Gas Outlets
Features and Benefits
Comply with NFPA 99 & CGA
Color coded according to USA standard
360˚ swivel inlet copper pipe for easy installation.
100% pressure and leak tested
Full range of mounting options
Available in Wall and Console Types
Connect to gas specific CHEMETRON Type Quick Adapters
152.
20m
m
126.90mm
12.70mm
63.95mm
165m
m
35.3
5mm
Wall TypeWall Type Gas Outlet includes finishing and rough-in assembly. The
finishing assembly has gas specific index corresponding to the gas
service on the rough-in assembly to prevent interchanging of gas
service. Each finishing assembly shall be color coded for its specified
gas service and processed by sandblasting treatment and painting.
The finishing assembly is intended for the level connection of the
medical gas wall outlets and filling up neighbor space. The rough-in
assembly is available in 1/2” K type copper pipe, which swivels 360˚
for easy installation.
Gases and Services
Oxygen
Air
Vacuum
Nitrous Oxide
Carbon Dioxide
WAGD
Dimensions
Console Type Gas Outlet includes finishing and rough-in assembly.
The finishing assembly has gas specific index corresponding to the
gas service on the rough-in assembly to prevent interchanging of
gas service. Each finishing assembly shall be color coded for its
specified gas service and be mounted for bedhead gas trunking
system. The rough-in assembly is available in 1/2” K type copper
pipe, which swivels 360˚ for easy installation.
Dimensions
Oxygen
Air
Vacuum
Nitrous Oxide
Carbon Dioxide
WAGD
Gases and Services
70.15mm
114.
50m
m
159m
m
58.70mm
12.70mm
22.30mm48.93mm
Console Type
mm
Exploded Diagram
Console Type
Wall Type
Wall Type
PAHSCO No. Description Specification
10322051 O2 1/2" COPPER TUBE10322052 VAC 1/2" COPPER TUBE10322053 AIR 1/2" COPPER TUBE10322054 CO2 1/2" COPPER TUBE10322055 N2O 1/2" COPPER TUBE10322056 WAGD 1/2" COPPER TUBE10322007 SLIDE 1/2" COPPER TUBE
Console Type
PAHSCO No. Description Specification
10434051 O2 1/2" COPPER TUBE10434052 VAC 1/2" COPPER TUBE10434053 AIR 1/2" COPPER TUBE10434054 CO2 1/2" COPPER TUBE10434055 N2O 1/2" COPPER TUBE10434056 WAGD 1/2" COPPER TUBE
Ordering Information
Distributor
4F, No.160, Daye Road, Beitou District, Taipei 11268, Taiwan
Tel: +886-2-2895-5050 Fax: +886-2-2897-8282
E-mail: [email protected]
www.pahsco.com.tw
www.pahsco.com.tw
Medical Gas OutletsCHEMETRON DISS
PAHSCO® CHEMETRON DISS Medical Gas Outlets are designed
with CGA’s concept of Diameter Index Safety System, and is
meant for medical gases at 200 psig or less. Gas outlets are
integral to medical gas supply system. PASHCO® CHEMETRON
DISS Gas Outlets comply with NFPA99 and CGA regulations. At
the same time, they pass various leak tests and connector stability
checks. A complete medical gas outlet includes finishing and
rough-in assembly. Moreover, PAHSCO® CHEMETRON DISS Gas
Outlets are color-coded with labels and marked with gas name
according to NFPA 99 or ISO 7396. They only accept
corresponding DISS Quick Adapter. This is to effectively eliminate
interchangeability of gas services, hence ensures safety in medical
supply. PASHCO® CHEMETRON DISS Gas Outlets are available
in Wall and Console Types.
CHEMETRON DISS Medical Gas Outlets
Features and BenefitsCE certified and UL listed
Comply with NFPA 99 & CGA
Color coded according to USA standard
360° swivel inlet copper pipe for installation from any angle
100% pressure and leak tested
Full range of mounting options
Available in Wall Type and Console Type
Connect to gas specific DISS Quick Adapter
Wall Type
CHEMETRON DISS Wall Outlet includes finishing and rough-in
assembly. The finishing assembly has gas specific index corresponding
to the gas service on the rough-in assembly to prevent interchanging of
gas service. Each finishing assembly shall be color coded for its
specified gas service and processed by sandblasting treatment and
painting. The finishing assembly is intended for the level connection of
the medical gas wall-outlets and filling up neighbor space. The rough-in
assembly is available in 1/2”, K type copper pipe, which swivels 360° for
installation from any angle.
Gases and Services
Dimensions
153
mm
127mm
12.70
165
mm
63.48mm
35.
35m
m
Oxygen
Medical Air
Vacuum
Carbon Dioxide
Nitrous Oxide
Nitrogen
WAGD
IAIR
CHEMETRON DISS Console Outlet includes finishing and rough-in
assembly. The finishing assembly has gas specific index
corresponding to the gas service on the rough-in assembly to
prevent interchanging of gas service. Each finishing assembly shall
be color coded for its specified gas service and be mounted for bed
head gas trunking system. The rough-in assembly is available in
1/2”, K type copper pipe, which swivels 360° for effortless
installation.
Console Type
Oxygen
Medical Air
Vacuum
Carbon Dioxide
Nitrous Oxide
Nitrogen
WAGD
IAIR
Gases and Services
70.30mm
114
.50m
m
12.70mm
159
mm
56.20mm 80mm
48.93 22.30
Dimensions
Exploded Diagram
Console Type
Wall Type
Ordering Information
Wall Type Rough-In Assembly
PAHSCO No. Description Specification
10322141 O2 1/2” COPPER TUBE10322143 AIR 1/2" COPPER TUBE10322146 VAC 1/2" COPPER TUBE10322144 CO2 1/2" COPPER TUBE10322142 N2O 1/2" COPPER TUBE10322145 N2 1/2" COPPER TUBE10322147 WAGD 1/2" COPPER TUBE10322148 IAIR 1/2" COPPER TUBE
Console Type Rough-In Assembly
PAHSCO No. Description Specification
10428251 O2 1/2" COPPER TUBE10428253 AIR 1/2" COPPER TUBE10428252 VAC 1/2" COPPER TUBE10428254 CO2 1/2" COPPER TUBE10428256 N2O 1/2" COPPER TUBE10428255 N2 1/2" COPPER TUBE10428257 WAGD 1/2" COPPER TUBE
10428258 IAIR 1/2” COPPER TUBE
Wall Type Service Kit
Console Type Service Kit
8040000031 O-ring Kit AIR, N2O, CO2, IAIR,N2
8040000032
8040000034
O-ring Kit O2
O-ring & Spring Kit VAC, WAGD
PAHSCO No. Description Specification
8040000031 O-ring Kit AIR, N2O, CO2
8040000032
8040000034
O-ring Kit O2, IAIR
8040000033 O-ring & Spring Kit N2O-ring & Spring Kit VAC, WAGD
PAHSCO No. Description Specification
Distributor
4F, No.160, Daye Road, Beitou Dist., Taipei 11268, TaiwanTel: +886-2-2895-5050 Fax: +886-2-2897-8282E-mail: [email protected]
www.pahsco.com.tw
Medical Gas OutletsCHEMETRON DISS
l Color-coded for easy gas service identification l Modular structure, convenient maintenancel German (DIN) Gas Outlet is CE listed and compliant with EN ISO 9170-1 and DIN 13620-2l British (BS) Gas Outlet is CE listed and compliant with HTM 02-01, ISO 9170-1 and BS 5682l Japanese (JIS) Gas Outlet is compliant with EN ISO 9170-1 and JIS T 7101
Solutions for Life
German / British / Japanese Medical Gas Outlets38X6 / 38X7 / 38X8
GENTEC® gas outlets are designed for delivery of medical gas from a central pipeline system. These outlets are 100% individually tested for leaks to ensure safety. The outlets are designed with safety in mind and comply fully with ISO 9170-1. Outlets are manufactured in an ISO 9001: 2008 and ISO 13485 registered facility.
Base Blockl High quality forged brass
38XX Series Medical Gas Outlets
Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Specifications
German Standard
British Standard
Japanese Standard
Console Installation Bracket Flush Mount Surface Mount
The Inlet Pipe l Base block allows for the inlet pipe to be in- stalled in 6 different directions for ease of installationl Multiple connections available: 90o copper tubing, 180o copper tubing, 90o hose connection, 180o hose connection, 90o VCR connection, 180o VCR connection
Gas Specific Indexingl Prevents interchanging of gas service
Pressure Lidl Manufactured from high quality plastic l Uses color code for differentiating gas service
Bodyl Durable high quality forged brass bodyl The sealing ring can be replaced without interrupting gas service to other outletsl Body is compatible with previous model pressure lid
38XX Series Medical Gas Outlets
Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Dimensions units in millimeter(s)
M14X1.5
64
52
56
56
15
9074
46
24
6-M4
8
26548
63
64
3~5
M14X1.5
64
63
5
47
24
6-M4
63
5
47
2-M
4
62
MAX 82
45o45o
45o
45o
64
64
64
3~5
3~5 3~5
3~53~5
47.5
(DIN
)50
.5(B
S,J
IS)
47.5
(DIN
)50
.5(B
S,J
IS)
47.5
(DIN
)50
.5(B
S,J
IS)
47.5
(DIN
)50
.5(B
S,J
IS)
47.5
(DIN
)50
.5(B
S,J
IS)
47.5
(DIN
)50
.5(B
S,J
IS)
66 /
70
Hol
e si
ze
47.5
(DIN
)50
.5(B
S,J
IS)
55(D
IN)~
65(B
S)
66 /
70
Hol
e si
ze
47.5
(DIN
)50
.5(B
S,J
IS)
55(D
IN)~
65(B
S)
1. Pull the pressure lid off
2. Loosen the two retaining bolts 2-3 mm Pull out the body at an angle
3. Replace the sealing ring without disassembling the panel mount
1A. Pull the pressure lid and the decor off
Surface Mount
Flush Mount
Install hole
38XX Series Medical Gas Outlets
Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Dimensions units in millimeter(s)
Repair Schematics
Type of Mounting Configuration Type of Mounting Configuration
P / C
Flat-faced pressure lid, console type with console plate
P / B
Flat--faced pressure lid, console type with installation bracket
P2 / C
Flat--faced pressure lid with round decor,console type with console plate
P2 / B
Flat--faced pressure lid with round decor,console type with installation bracket
38XX Series Medical Gas Outlets
Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
*: Please ask GENTEC or your local distributor for availability.
Ordering Information ( Console Type )
381 6 - V - S P08 - P / C
Series Type Gas Service
Inlet Direction
Inlet Connection
Lid Type
Type of Mounting
6: GSO (DIN)
7: BSO (BS)
8: JSO (JIS)
O: Oxygen
V: Vacuum
A: Air (400 kPa)
2: N2O
C: CO2*
N: N2-800*
A8: Air-800*
S: 90o
R: 180o
P08: Straight, O.D. of 8mm
P10: Straight, O.D. of 10mm
HB4: Flexible hose: 1/4"
HB5: Flexible hose: 5/16"
M14: Threading M14 X 1. 5VCR
P: Flat-faced pressure lid
P2: Flat-faced pressure lid
with round decor
C: With console plate
B: With installation bracket
Type of Mounting Configuration Type of Mounting Configuration
P / F
Flat-faced pressure lid, wall type,flush mount with protective cover
P / W
Flat--faced pressure lid, wall type,surface mount with protective cover
P1 / F
Flat-faced pressure lid with square decor, wall type, flush mount
P1 / W
Flat-faced pressure lid with square decor, wall type, surface mount
38XX Series Medical Gas Outlets
Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Ordering Information ( Wall Type )
*: Please ask GENTEC or your local distributor for availability.
382 6 - V - S P08 - P / F
Series Type Gas Service
Inlet Direction
Inlet Connection
Lid Type
Type of Mounting
6: GSO (DIN)
7: BSO (BS)
8: JSO (JIS)
O: Oxygen
V: Vacuum
A: Air (400 kPa)
2: N2O
C: CO2*
N: N2-800*
A8: Air-800*
S: 90o
R: 180o
P08: Straight, O.D. of 8mm
P10: Straight, O.D. of 10mm
HB4: Flexible hose: 1/4"
HB5: Flexible hose: 5/16"
M14: Threading M14 X 1. 5VCR
P: Flat-faced pressure lid
P1: Flat-faced pressure lid
with square decor
F: Flush Mount
W: Surface Mount