MediaStar Pro

MediaStar Pro

MediaStar Pro – TV over Cat-5/UTP

StarMediaPro

CabletimeCabletimeCabletime Limited, 64 Greenham Road, Newbury, Berkshire, RG14 7HX, UK www.cabletime.com n email: [email protected] n +44 (0)1635 35111Cabletime USA 973 288 8010 n email: [email protected] Cabletime Asia +852 3101 2650 n email: [email protected]

Pro Overview

Pro Application Story – Betfair

Pro Application Story – Open University

Pro Application Story – Emirates Stadium

461 Pro Administration Software Suite

463 Pro SIPI Option with Controller Module & PC Channel Change Application

500 Pro Video Hub

507 Pro Micro Settop TV over Cat-5/UTP

508 Pro Micro Desktop PC Receiver Unit

512 Pro Micro Access Touch Panel Receiver

560 Pro Quad Cards for 90/180 Channel TV/AV Service

560 Pro Quad Cards for 100/200 Channel TV/AV Service

700 Pro Rack Mount Controller

911-4141 Pro IR Sensor Module

790/1Y Pro IR Remote Control Unit

Pro Price List

MediaStar Pro The MediaStar Pro system is capable of delivering up to 180 PAL and 200 NTSC channels of TV and AV sources through the CAT-5/UTP structured cabling infrastructure. The heart of the system is the MediaStar Adminstration software, a comprehensive management program which allows System Managers complete control of the MediaStar Pro system and the ability to determine the privileges and access rights accorded to individual users and groups. The MediaStar Administration software monitors and addresses the MediaStar Video Hub Chassis, the hardware switches which route the video and audio content to the appropriate end points on the system, in addition to managing the MediaStar Evolution IPTV elements of the solution as well. The MediaStar Administration software is the gatekeeper that ensures that only the appropriate content is delivered to specific authorised end users.

StarMediaPro

MediaStar Pro


TV over Cat-5/UTP

Cat-5

500SNTL Pro Hubs inc 560SPTL Quad Distribution Cards

440-7005 ProAmplifiers

Headend and Sources

RF feeds from the Headend to each Pro Hub

507 Pro Micro-Settop Unit

508 ProDesktop Unit

Typical Desktop Position

Pro RCU

Floor Parts

MediaCabling Infrastructure

700/C Mediastar System ControllerNote. RS485 or IP Link between System Controller and Hubs not shown

Satellite Dish

Typical Display/TV position

MediaStar Pro

MediaStar keeps Betfair up to date

Cabletime’s MediaStar Pro and Compact video distribution solutions are delivering a huge number of realtime TV channels at Betfair, the world’s leading online betting exchange, using the Cat-5e/6 cabling infrastructure at the company’s two UK offices.

The installation at Betfair’s Stevenage office, follows on from two successful installations at the company’s London and Tasmanian offices, and was managed by systems integrator Decibel Managed Systems on behalf of Audio Visual Machines Ltd., (AVM Ltd). The original specification was dual MediaStar Compact solutions, which were able to deliver 32 channels made up of 16 channels on one and 16 on the other. This has been expanded using MediaStar Pro, which can provide up to 180 channels of live TV across the Cat-5e/6 cabling. Decibel has re-installed the Compact systems into the racks, so that Betfair can remotely control the satellite receivers, without the need to leave their desks and lose market management time.

Betfair is a registered bookmaker in the UK and operates a betting exchange. Through cutting-edge technology, the company matches bets between punters at prices punters set themselves. Betfair takes a small commission on net winnings. The company processes more than 300 bets per second during peak hours.

Cabletime’s solutions were originally installed at Betfair’s headquarters in Hammersmith, and it was the success of this installation that prompted IS Manager Tony Rigby to specify MediaStar for the Stevenage office. The installation was managed by Carole-Ann Naylor, Betfair AV/TV Project Engineer, who heads up all TV/AV and VC for Betfair UK, She said: “We have been impressed by MediaStar since it was installed. Its ease of use and reliability are vital to us and we were keen to stick with the same system in our new office.”

Graeme Mayhew at Decibel Managed Systems, said: “MediaStar provides a rock solid, stable solution for Betfair. It does exactly what it promises to do, and is straightforward to operate as well as being totally reliable. Because Betfair builds its service around providing up to the minute sporting results, it needs a solution that it can totally depend on. MediaStar Pro also offers additional management software, so it gives Betfair a great deal of flexibility in using the system.”

MediaStar Pro is a complete solution for professionally managed multi-channel video and audio delivery. Without impacting on the LAN, it offers 100/200 TV channel capacity, unlimited users, use of an existing Cat 5e/6/7/ infrastructure and total control of users viewing rights. MediaStar Compact is very flexible and easy to use, like its sister product, it also has zero impact on the LAN and offers 16 channel capacity, with up to 24 outlets per hub.

MediaStar Pro Application Story

StarMediaPro


MediaStar Pro

Open University looks to the future with MediaStar

The new Library at The Open University’s main campus headquarters in Milton Keynes had an eye on the demands of future technology when it recently deployed a MediaStar TV distribution and video conferencing system from Cabletime.

With CAT 6e cabling already installed in the Walton Hall HQ, The Open University was looking for a solution that could deliver TV, video, presentations, video conferencing and radio across its network, and which could also offer the OU some degree of future-proofing as its requirements changed.

The Open University specified the MediaStar Pro from Cabletime, which is designed to work on Cat5/6 structured cabling with the facility to run video, audio and IR codes on a single cable. The system was installed by CTL AV.

The Open University Library has meeting and presentation rooms as well as public areas and a cafeteria. The system needed to be flexible so that, for example, a group of students could be accessing one of the huge archive of OU programmes on DVD or video in a meeting room, whilst the reception area was displaying BBC News 24. In order to provide this flexibility, CTL installed two MediaStar hubs with 40 input sources, from which the OU can select channels including all the terrestrial stations, Sky and other digital and satellite channels. The signals are digital and satellite channels. The signals are being displayed on a range of output devices including projectors, LCD screens and plasma displays.

Mary Hunt, Project Manager at the OU Library said: “Initially we used the system to display presentations, stream video or deliver news and we are now starting to use videoconferencing. We plan to use video over IP in the near future.”

As well as the TV distribution facility, the OU can also use MediaStar’s multipoint video conferencing facility which enables up to six people to meet at any one time, and allows students and lecturers to make face to face contact with other Open University sites.

Mike Bell at CTL AV, said: “The MediaStar system that was installed at The Open University Library is flexible enough to provide a range of functions, depending on the individual user. We were happy to use MediaStar because it is proven technology that works on structured cabling.

The next stage for The Open University will be to add MediaStar Evolution, Cabletime’s latest addition to the MediaStar family. Evolution has been designed to take advantage of the developments in technology that allow efficient digital video delivery over IP based networks, and will broaden further the range of channels that the OU will be able to access.

With installations throughout the world in banks and financial institutions, sports stadia and shopping malls, as well as other educational institutions the MediaStar pedigree has been long established.

The only complete solution for professionally managed multi-channel video and audio delivery, MediaStar Pro offers zero LAN impact, 100/200 TV channel capacity, unlimited users, use of existing Cat5/6/7 infrastructure, total control of all users viewing rights, IP/RS232/RS485 control and SNMP monitoring and IR remote control.


StarMediaPro


MediaStar Pro


StarMediaPro


MediaStar delivers real-time football action at Emirates Stadium

Emirates Stadium is one of the most technologically-advanced sports venues in the world. The Press area of the stadium is equipped with 120 seats staged in pairs with a shared tabletop. On each table sits a single LCD display in a stainless steel casing. Live broadcast of the action on the pitch from an outside broadcaster such as Sky Sports was needed on the monitors to ensure that the Press attendees were receiving the live play as it happened, and were able to view the instant replays.

However, despite the sophistication of the new TV infrastructure, there existed a delay in the sports action on the monitors so that when a goal was scored on the pitch, it would appear a few seconds later on screen via the distribution system. This was clearly an issue in areas where both the monitors and the action on the pitch could be seen at the same time.

Systems integration specialist, Feltech and Cabletime, which has been behind live video distribution in a number of the UK’s leading sports stadiums, came to the rescue just weeks before the Emirates Stadium was due to open its doors to anxiously anticipating fans. Feltech supplied the 60 widescreen LCD monitors used on the Press Area tabletops, one Cabletime MediaStar Pro Hub and 60 MediaStar Pro Settop Receiver Units which ensure that live footage relayed by the outside broadcaster can be delivered in real time to the screens in the Press area without a single second of play being missed.

The system uses a single channel RF headend installed by Feltech, and the MediaStar Pro Hub by Cabletime receives the modulated feed from the outside broadcaster plug-in point. This is sent to the RF input of the Pro Hub which provides live service to the 120 press participants. MediaStar Pro Micro TV Settop Receiver Units connect directly to the display source, in this case the tabletop LCDs. The MediaStar Pro Micro TV Settop Receiver Unit connects to the front panel RJ45 sockets on the MediaStar Pro Hub via the stadium’s data cabling and allows interconnection at distances of up to 800 meters (2,600 ft) over CAT5/5e/6.

The solution provided by Feltech and Cabletime’s MediaStar Pro allowed Emirates Stadium to provide its press attendees with the real-time football action necessary with minimal impact to the network and in a ‘plug and play’ manner that is robust and scalable.

MediaStar Pro

TV over Cat-5/UTP

StarMediaPro


461 Pro Administration Software Suite Where the customer wishes to provide their own dedicated server, the MediaStar Administration Software Suite, consisting of the Controller and Administrator applications, is provided without a host server. It includes configuration tools to manage MediaStar Hubs in multiple locations, define user groups, viewing rights, scheduled forced channel events and SNMP Monitoring Application. Runs on dedicated, customer provided server.

461/UG - For existing MediaStar Pro sites the MediaStar Controller and Adminstration Software can be upgraded to latest release, software only.

465/UG - MediaStar Pro 500 series ROMs (2 parts) software to upgrade to latest release.

Companion Models & Accessories500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software463 SIPI Option

MediaStar Pro

463 SIPI Option with Controller Module and PC Channel Change ApplicationSIPI is an ‘open’ standard interface that allows third party applications to control various functions of the MediaStar Pro and Evolution systems. The SIPI server is a software process that runs on the MediaStar System Controller. It is available only when the system has the appropriate license dongle entitlements. Control messages are sent from a third party control device(the client) to the SIPI server. The SIPI server receives and checks the messages and then issues appropriate internal instructions to the MediaStar Pro or Evolution systems. Once a command has been processed it returns appropriate messages to the client. The client is typically a software application running on a PC or a Crestron or similar control system. All control messages and responses are transmitted using a LAN based IPTCP communications link.

TV over Cat-5/UTP

StarMediaPro


Companion Models & Accessories:463/5 - 5 User License463/10 - 10 User License463/20 - 20 User License463/50 - 50 User License463/100 - 100 User License464 - MediaStar Pro SNMP system monitoring application466/UG - MediaStar Pro Controller upgrade/replacement Security Dongle

MediaStar Pro

500 Pro Video Hub for 90/180 (PAL) 100/200 (NTSC) Channel TV/AV ServiceThe MediaStar Pro Hub is a 7U rack mountable video hub with a 90/180 (PAL) 100/200 (NTSC) channel TV/AV service to a total of 64 individual receiver units. The Hub is line powered to support MediaStar Pro Micro TV Settop Receiver Units (Part 507), Micro PC Desktop Receiver Units (Part 508), and Micro Access Receiver Units (Part 512) to enable versatile and scalable TV/AV delivery over a Cat-5/UTP cabling infrastructure. Each Hub can house up to 16 ‘hot swappable’ Quad Outlet Blades (Part 560), each supporting four independent receiver units, serving touch screen panels, PC, or Plasma/LCD display. Front panel RJ45 sockets allow interconnection with the Receiver Units at distances of up to 800 meters (2,600 ft).

An RF Headend (Part KUF series) combines incoming satellite signals and MATV/CATV feeds, with local content from decoder units, (such as the MediaStar Evolution 760 or 760/xM), cameras, DVDs and VCRs to form a RF backbone for distribution to the MediaStar Pro Hub. Configuration, control and monitoring of the MediaStar Pro Hub can be easily accomplished using an IP or RS232/RS485 connection from the video hub to a MediaStar Pro Hub Controller and MediaStar Pro Administration software (Part 700).

500/SL Pro Hub: 90 Channel service (PAL) to 64 users500/DL Pro Hub: 180 Channel service (PAL) to 64 users

Included within the scope of delivery: 500 SL or DL Pro Hub, Rack Mounting kit, 2 x UK power leads, 2 x US power leads, 2M RS232 Cable, RJ45 terminator, 2M Cat-5 patch cable, 1M coax cable

SpecificationsVideo Standards

n Supported PAL /NTSC

Rear Panel Video Inputs

n Composite 1V pk-pk (75Ω)

Composite Video SNR (weighted)

n >71dB

Rear Panel Audio Inputs

n Stereo 2.2V pk-pk (10KΩ) PAL and NTSC

RF Input

n 48-862 MHz Type F (75Ω)n Antenna Mode: Input Level 0 to +17dBmV- Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV.- 8 RF TV Carriers: Max Input 24dBmVn CATV Mode: Input level 25 dBmV - 40dBmV- Adjacent Carrier Levels: Max 2dB Between Adjacent

Carriers- Video SNR (weighted): 52dB @25dBmV. 56dB @40dBmV.

IR remote control

n 38kHz Modulated

Hub Communications

n Proprietary Protocol

Local Control

n RS232/RS485, 9 pin D type Male

IP Browser Control

n 10 Base-T, RJ45

TV over Cat-5/UTP

Power: 3 pin IEC Male 100-264V AC, 1.5APower Dissipation: 80W maxWeight: 5Kg/11lbDimensions: 45x437x350 mmEnvironmental: 0 - 40°CApprovals: CE, UL, FCC part 15 class AChassis: 1U 19” rack

Companion Models & Accessories:560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

StarMediaPro


507 Pro Micro Settop TV over Cat-5/UTP The Micro Settop TV Receiver allows TV viewing at a Plasma/LCD/TV. The 507/P unit outputs baseband video and audio to a suitable display device. Local channel and volume selection is made using the accompanying IR Sensor, (Part 911-4141), and Remote Control Unit, (Part 590/1Y). The 507/P connects via the Cat-5/UTP cabling infrastructure, at distances of up to 800 meters, (2,600 ft), to a front panel RJ45 socket on a Quad Outlet Blade, (Part 560/SPTL), this is housed inside the MediaStar Pro Hub, (Part 500/SL).

Included within the scope of delivery: 507 Pro Micro Settop Unit, Quick Reference Guide, IR Remote Control, (Part 590/1Y), IR Sensor module, (Part No. 911-4141), SCART to 2 x phono lead, Velcro Mounting Kit.

n 507/UK - The MediaStar Pro End Point PSU is used to provide local power to either a 507, 508 or 512 endpoint receivers. It is needed only where non line powered MediaStar Pro systems are in place. UK plug top PSU - 220V/12V DC.


n Supported PAL/NTSC




n >71dB



RF Input

n 48-862 MHz Type F (75Q)Antenna Mode: Input Level 0 to +17dBmV- Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV.- 8 RF TV Carriers: Max Input 24dBmVn CATV Mode: Input level 25 dBmV - 40dBmV- Adjacent Carrier Levels: Max 2dB Between Adjacent

Carriers- Video SNR (weighted): 52dB @25dBmV. 56dB @40dBmV

IR remote control

n 38kHz Modulated

Hub Communications


Local Control


IP Browser Control

n 10 Base-T, RJ45

MediaStar Pro

TV over Cat-5/UTP

StarMediaPro


Power: 3 pin IEC Male 100-264V AC, 1.5APower Dissipation: 80W maxWeight: 5Kg/11lbDimensions: 45 x 437 x 350mmEnvironmental: 0 - 40°CApprovals: CE, UL, FCC part 15 class AChassis: 1U 19” rack

Companion Models & Accessories:500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507/UK Pro End Point PSU508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

MediaStar Pro

508 Pro Micro Desktop PC Receiver Unit The Micro PC Desktop Receiver allows TV viewing at a PC. The 508/P unit outputs baseband video and audio to a suitable video inlay card housed inside the PC. Local channel and volume selection is made through the MediaStar Desktop Software GUI, the PC then communicates this instruction through a RS232 connection to the Desktop Receiver. The 508/P connects via the Cat-5/UTP cabling infrastructure, at distances of up to 800 meters, (2,600 ft), to a front panel RJ45 socket on a Quad Outlet Blade, (Part 560/SPTL), this is housed inside the MediaStar Pro Hub, (Part 500/SL).

Included within the scope of delivery: 508 Pro Micro Desktop PC Receiver unit, Quick Reference Guide, 2.5mm Jack Plug to 9-way “D” type RS232 cable, phono to phono cable, phono to 3.5mm Jack cable, 3.5mm female to female jack socket adapter, Velcro mounting kit.

507/UK - The MediaStar Pro End Point PSU is used to provide local power to either a 507, 508 or 512 endpoint receivers. It is needed only where non line powered MediaStar Pro systems are in place. UK plug top PSU - 220V/12V DC.






n >71dB



RF Input

n 48-862 MHz Type F (75Ω)n Antenna Mode: Input Level 0 to +17dBmV- Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV- 8 RF TV Carriers: Max Input 24dBmV

n CATV Mode: Input level 25 dBmV - 40dBmV- Adjacent Carrier Levels: Max 2dB Between Adjacent


IR remote control

n 38kHz Modulated

Hub Communications


Local Control


IP Browser Control

n 10 Base-T, RJ45

TV over Cat-5/UTP

StarMediaPro


Power: 3 pin IEC Male 100-264V AC, 1.5APower Dissipation: 80W maxWeight: 5Kg/11lbDimensions: 45 x 437 x 350mmEnvironmental: 0 - 40°CApprovals: CE, UL, FCC part 15 class AChassis: 1U 19” rack

Companion Models & Accessories:500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit507/UK Pro End Point PSU512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

512 Pro Micro Access Touch Panel Receiver The Micro Access Touch Panel Receiver allows TV viewing at a Plasma/LCD/TV. Designed for use with touch screen control panels such as Crestron, the 512/P unit outputs composite video and audio to a suitable display device. Local channel and volume selection is made through a touch panel interface which then communicates this instruction through a RS232 connection to the Micro Access Touch Panel Receiver. The 512/P connects via the Cat-5/UTP cabling infrastructure, at distances of up to 800 meters, (2,600 ft), to a front panel RJ45 socket on a Quad Outlet Blade (Part 560/SPTL) housed inside the MediaStar Pro Hub (Part 500/SL).

Included within the scope of delivery: 512 Pro Micro Access Receiver Unit, Quick Start Guide, 2.5mm Jack Plug to 9-way “D” type RS232 cable, phono to phono cable, phono to 3.5mm Jack cable, 3.5mm female to female jack socket adapter, Velcro mounting kit.

507/UK - The MediaStar Pro End Point PSU is used to provide local power to either a 507, 508 or 512 endpoint receivers. It is needed only where non line powered MediaStar Pro systems are in place. UK plug top PSU - 220V/12V DC.


n Supported PAL/NTSC




n >71dB



RF Input

n 48-862 MHz Type F (75Ω)n Antenna Mode: Input Level 0 to +17dBmV- Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV- 8 RF TV Carriers: Max Input 24dBmV

n CATV Mode: Input level 25 dBmV - 40dBmV- Adjacent Carrier Levels: Max 2dB Between Adjacent

Carriers- Video SNR (weighted): 52dB @25dBmV. 56dB @40dBmV.

IR remote control

n 38kHz Modulated

Hub Communications


Local Control


IP Browser Control

n 10 Base-T, RJ45

MediaStar Pro

TV over Cat-5/UTP

StarMediaPro


Power: 3 pin IEC Male 100-264V AC, 1.5APower Dissipation: 80W maxWeight: 5Kg/11lbDimensions: 45 x 437 x 350 mmEnvironmental: 0 - 40°CApprovals: CE, UL, FCC part 15 class AChassis: 1U 19” rack

Companion Models & Accessories:500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit507/ UK Pro End Point PSU508 Micro Desktop PC Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

MediaStar Pro

560 Pro Quad Cards for (PAL) 90/180 Channel TV/AV Service The Quad Outlet Blade is placed into a spare slot inside a MediaStar Pro Hub, (Part 500SL). Front Panel RJ45 sockets allow interconnection with MediaStar Pro Receiver Units, (Settop, 507P; Desktop, 508P; Micro Access Touch Panel, 512P), at a distance of up to 800 metres via the installed Cat-5/UTP cabling infrastructure. The Quad Outlet Blade supports up to 90 or 180 channels of PAL TV and provides line power through the Cat-5/UTP cabling to the MediaStar Pro Receiver Units.

n 560/SPTL - Pro Hub Quad Outlet Blade (PAL) 90 channels

n 560/DPTL - Pro Hub Quad Outlet Blade (PAL) 180 channels

n The Quad Outlet Blade also supports an additional audio channel to replicate the audio selected at the MediaStar Pro Receiver.

n 560/SPTR - Pro Hub Quad Outlet Blade (PAL) 90 channels + Local Audio

n 560/DPTR - Pro Hub Quad Outlet Blade (PAL) 180 channels + Local Audio






n >71dB



RF Input

n 48-862 MHz Type F (75Ω)n Antenna Mode: Input Level 0 to +17dBmV - Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV - 8 RF TV Carriers: Max Input 24dBmVn CATV Mode: Input level 25 dBmV - 40dBmV - Adjacent Carrier Levels: Max 2dB Between Adjacent


IR remote control

n 38kHz Modulated

Hub Communications


Local Control


IP Browser Control

n 10 Base-T, RJ45

TV over Cat-5/UTP

StarMediaPro



Companion Models & Accessories:500 SL/DL Pro Video Hub507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

MediaStar Pro

560 Pro Quad Cards for (NTSC)100/200 Channel TV/AV Service The Quad Outlet Blade is placed into a spare slot insidea MediaStar Pro Hub, (Part 500SL). Front Panel RJ45sockets allow interconnection with MediaStar ProReceiver Units, (Settop, 507P; Desktop, 508P; MicroAccess Touch Panel, 512P), at a distance of up to 800metres via the installed Cat-5/UTP cabling infrastructure.The Quad Outlet Blade supports up to 100 or 200channels of NTSC TV and provides line power through the Cat-5/UTP cabling to the MediaStar Pro Receiver Units.

n 560/SNTL - Pro Hub Quad Outlet Blade (NTSC) 100 channelsn 560/DNTL - Pro Hub Quad Outlet Blade (NTSC) 200 channelsn The Quad Outlet Blade also supports an additional audio channel to replicate the audio selected at the MediaStar Pro Receiver.n 560/SNTR - Pro Hub Quad Outlet Blade (NTSC) 100 channels + Local Audion 560/DNTR - Pro Hub Quad Outlet Blade (NTSC) 200 channels + Local Audio






n >71dB



RF Input

n 48-862 MHz Type F (75Ω)n Antenna Mode: Input Level 0 to +17dBmV - Video SNR (weighted): 50dB @0 dBmV. 54dB @17 dBmV - 8 RF TV Carriers: Max Input 24dBmVn CATV Mode: Input level 25 dBmV - 40dBmV - Adjacent Carrier Levels: Max 2dB Between Adjacent


IR remote control

n 38kHz Modulated

Hub Communications


Local Control


IP Browser Control

n 10 Base-T, RJ45

TV over Cat-5/UTP

StarMediaPro



Companion Models & Accessories:500 SL/DL Pro Video Hub507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier700 Pro Controller and Administration Software461 Administration Software Suite

MediaStar Pro

700 Pro Rack Mount Controller The MediaStar Rack Mount Controller is a 1U rack mountable chassis server running the MediaStar Controller and Administrator Software, providing management and control of the MediaStar Pro system. It includes configuration tools to manage MediaStar Hubs in multiple locations, define user groups, viewing rights, scheduled forced channel events and SNMP Monitoring Application.

TV over Cat-5/UTP

Dimensions: Height 1.68”/4.2cm, Width 16.7”/42.42cm, Depth 24”/61.0cm

Companion Models & Accessories:500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier461 Administration Software Suite

StarMediaPro


MediaStar Pro

911-4141 Pro IR Sensor ModuleIR Sensor Module fitted with 3.5mm Jack for connection to MediaStar Pro Micro Settop Unit (Part 507) to allow the small IR sensor to be located in a convenient location and the larger receiver unit housed discreetly behind a screen.

790/1Y Pro IR Remote Control UnitViewer control of the MediaStar Pro is with IR Remote Control Unit. Viewers can select channels and adjust volume, assisted by an On Screen Display capability showing channel name and volume status.

n 400/5000 - RS 232 to RS 485 converter and line driver for multi hub systemsn 468 - RS 232/485 to IP converter to enable IP network control of MediaStar Pro 500 series hubsn 510 - MediaStar wired keypad remote control for use with MediaStar Pro Micro TV Settop Receiver, (Part 507), (150mm x 80mm x 30mm / 6” x 3 1/4 x 1 1/4)

TV over Cat-5/UTP

StarMediaPro


Companion Models & Accessories:500 SL/DL Pro Video Hub560 Pro Quad Outlet Blade507 Micro Settop TV Receiver Unit508 Micro Desktop PC Receiver Unit512 Micro Access Touch Panel Receiver Unit440-7005 Pro Hub Amplifier

Documents

MediaStar Pro