MECHANICS OF COMPOSITE MATERIALS · Finite-Layer Method: Bending and Twisting of Laminated Plates with ... Strength of the Joint of an Anisotropic Composite and a Cylindrical Element

MECHANICS OF COMPOSITE MATERIALS

A translation of Mekhanika Kompozitnykh Materialov

Volume 52, Number 1 March, 2016

CONTENTSEngl./Russ.

Equal-Stressed Reinforcement of Metal-Composite Plates in Transverse Bending at Steady-State Creep with Account of Weakened Resistance to In-Plane Shears - A. P. Yankovskii . . . . . . . . . . . . . . . . . . . . . . . 1 3

Calculation of the Macroscopic Elastic Moduli of Carcass Composites with Interpenetrating Components by Using the Method of Effective Volumes of Averaging - A. F. Fedotov . . . . . . . . . . . . . . . . . . . . . . . . .1727. 2727.

Creep Effects in Pultruded FRP Beams - G. Boscato, C. Casalegno, and S. Russo . . . . . . . . . . . . . . . . . . . . . . . . . 2727. 41

Behavior of Concrete Beams with Peel-Plied Aramid-Fiber-Reinforced Polymer Plates - Sungnam Hong and Sun-Kyu Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 61

Finite-Layer Method: Bending and Twisting of Laminated Plates with Delaminations - A. M. Timonin . . . . . . . . . 55 727.727.

Variational Method of the Theory of Plasticity for Inhomogeneous and Composite Bodies at Irradiation - R. Yu. Amenzadeh and Yu. M. Sevdimaliyev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .727.3 105

Viscoelastic Characteristics of Highly Filled Polymer Composites under Two-Frequency Actions - A. S. Yankin, R. V. Bul’bovich, S. V. Slovikov, V. E. Vil’deman, and V. V. Pavlogradskii . . . . . . . . . . . . . . . . . . . . .81 115

Strength of the Joint of an Anisotropic Composite and a Cylindrical Element of the Exhaust System of Road Vehicles - A. Yu. Sergeev, R. A. Turusov, and N. I. Baurova . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89129. 129129.

Magnetooperated Polydisperse Granulated Magnetized Structures - A. A. Pan’kov . . . . . . . . . . . . . . . . . . . . . . . . . .9129.9129. 143

Plasma-Sprayed Nanostructured Composite Coatings Based on Cu-Containing Hydroxyapatite - A. V. Lyasnikova, O. A. Markelova, V. N. Lyasnikov, O. A. Dudareva, and I. P. Grishina . . . . . . . . . . . . . . . . . . . . . . . 109129. 15727.

Analysis of High-Performance PTSA-Doped Polyaniline-SPEEK Nanocomposites - R. K. Misra, K. Sandeep, and V. Nigam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 163

Notes for contributors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12727. 181

ERRATUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Mechanics of Composite Materials is abstracted or indexed in Science Citation Index Expanded (SciSearch), Journal Citation Reports/Science Edition, SCOPUS, INSPEC, Chemical Abstracts Service (CAS), Google Scholar, EBSCO, CSA, Academic OneFile, Academic Search, ChemWeb, CSA Environmental Sciences, Current Contents/Engineering, Computing and Technology, Earthquake Engineering Abstracts, EI-Compendex, Gale, INIS Atomindex, OCLC, Polymer Library, Reaction Citation Index, Referativnyi Zhurnal (VINITI), SCImago, Summon by ProQuest.



Volume 52, Number 2 May, 2016

CONTENTSEngl./Russ.

Development of an Improved Technique for Identification of the Damping Properties of Orthogonally Reinforced Composites in Shear - V. N. Paimushin, V. A. Firsov, I. Gyunal, and V. M. Shishkin . . . . . . . . . . . . 133 193

Evaluation of the Linear Thermal Expansion Coefficient of a Composite with Disperse Anisotropic Inclusions by the Self-Consistency Method - V. S. Zarubin, G. N. Kuvyrkin, and I. Yu. Savel’eva . . . . . . . . . .143 209

A Glass-Fiber-Reinforced Composite with a Damage Indication Function - O. Bulderberga, A. Aniskevich, and S. Vidinejevs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 225

Identification of a Segment of the Yield Surface of a Two-Layer Pa38/M2R Composite - R. R. Uscinowicz . . . . . 163 237Across-the-Thickness Gradient of the Interlaminar Shear Strength of a CFRP after its Long-Term Exposure

to a Marine Climate - V. O. Startsev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 249Model of the Stress State of a Unidirectional Composite with Cylindrical Fibers Forming a Tetragonal

Structure - A. G. Nikolaev and E. A. Tanchik . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 257Deformation of Homogeneous and Multilayered Coverings with Longitudinal Defects on a Rigid Foundation -

O. G. Gurtovyi, S. O. Tynchuk, and D. V. Zhuk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189275. 275Investigation of Riveted Joints of Fiberglass Composite Materials - R. Bielawski, M. Kowalik, K. Suprynowicz,

W. Rządkowski, and P. Pyrzanowski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 291Choice of Design Variables in the Stacking Sequence Optimization for Laminated Structures - A. Muc . . . . . . . . .211 305Optimizing the Composition of Elastomer Composites for the Fracture Energy - E. M. Nurullaev and

A. S. Ermilov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 325Energy Dissipation Capacity of Reinforced Concrete Beams Strengthened with CFRP Strips - Sungnam Hong

and Sun-Kyu Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231 335Influence of the Interaction Between Fibers Periodically Located in a Composite Material on the Distribution

of Stresses in it - S. D. Akbarov, R. Kosker, and Y. Ucan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 349A Simple Finite Element with Five Degrees of Freedom Based on Reddy’s Third-Order Shear Deformation

Theory - K. Belkaid, A. Tati, and R. Boumaraf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257 367Load-Carrying Capacity of a Fiber-Reinforced Annular Tree-Layer Composite Plate Clamped on its External

and Internal Contours - A. A. Jahangirov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271 385

Ralejs Tepfers (19275.33-2015) - Editorial Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 39275.9275.




Volume 52, Number 3 July, 2016

CONTENTSEngl./Russ.

Asymptotic Solutions of Boundary Value Problems of Electroelasticity for Transversely Isotropic Toroidal Shells Made of Piezoceramic Materials - L. A. Aghalovyan and R. S. Gevorkyan . . . . . . . . . . . . . . . . . . . .283407. 407

Optimization of a Hybrid-Fiber-Reinforced High-Strength Concrete - L. E. T. Ferreira, J. B. de Hanai, and V. J. Ferrari . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295423. 423407.

Prestressing Effects on the Performance of Concrete Beams with Near-Surface-Mounted Carbon-Fiber-Reinforced Polymer Bars - Sungnam Hong and Sun-Kyu Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3407.05423. 43407.7

Variant of the Continuum Model of Effective Elastic Moduli of Transversely Isotropic Porous Materials - A. F. Fedotov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3407.17 45423.1

Fixed Points of Vitrification Equations - S. A. Filko, D. A. Tursynbayeva, and I. N. Filko . . . . . . . . . . . . . . . . . . . 3407.25423. 463407.Optimization of the Structure of a Ceramic-Aluminum Alloy Composite Subjected to the Impact of Hard Steel

Projectiles - A. Morka, P. Kędzierski, and P. Muzolf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3407.3407.3407. 473407.Determination of the Mode I Interlaminar Fracture Toughness by Using a Nonlinear Double-Cantilever

Beam Specimen - V. Pavelko, K. Lapsa, and P. Pavlovskis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3407.47 491An Approximate Solution to the Plastic Response of Clamped Sandwich Beams under Concentrated Loading -

Z. Y. Xie, Zhibin Li, and J. L. Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3407.5423.9 5423.07Fatigue Failure Criterion of Laminated Composites under a Complex Stress-Strain State - V. Strizhius . . . . . . . . 3407.69 5423.21Simulation of Experimental Parameters of RC Beams by Employing the Polynomial Regression Method -

B. Sayin, S. Sevgen, and R. Samli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3407.79 5423.3407.5423.Numerical Simulation of the Nonlinear Deformation and Progressive Destruction of Composite Cylindrical

Shells at Nonaxisymmetric Explosive Actions - N. A. Abrosimov and A. V. Elesin . . . . . . . . . . . . .3407.89 5423.47Experimental Investigation of the Capacity of Steel Fibers to Ensure the Structural Integrity of Reinforced

Concrete Specimens Coated with CFRP Sheets - V. Gribniak, A. K. Arnautov, A. Norkus, V. Tamulenas, E. Gudonis, and A. Sokolov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .401 5423.63407.

Stress–Strain State of Thick-Walled Filament-Wound Cylinders at the Macro-, Meso-, and Microscales During Cooling - R. A. Turusov and H. Memarianfard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .411 5423.77

Rheological and Mechanical Properties of Silica-Based Bagasse-Fiber-Ash-Reinforced Recycled HDPE Com-posites - W. Sitticharoen, A. Chainawakul, T. Sangkas, and Y. Kuntham . . . . . . . . . . . . . . . . . . . . . 421 5423.91

Boris Efimovich Pobedrya (193407.7-2016) - Editorial Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43407.3407. 607




Volume 52, Number 4 September, 2016

CONTENTSEngl./Russ.

Identification of the Elastic and Damping Characteristics of Soft Materials Based on the Analysis of Damped Flexural Vibrations of Test Specimens - V. N. Paimushin, V. A. Firsov, I. Gyunal, and V. M. Shishkin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .435615. 615615.

Fatigue Damage Accumulation Under Quasi-Random Loading of Composite Airframe Elements - V. Strizhius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45615.5615. 645615.

Finite-Layer Method: Exact Numerical and Analytical Calculations of the Energy Release Rate for Uni-directional Composite Specimens in Double-Cantilever Beam and End-Notched Flexure Tests - A. M. Timonin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .469665. 665615.

Influence of Stacking Sequence and Notch Angle on the Charpy Impact Behavior of Hybrid Composites - S. Behnia, V. Daghigh, K. Nikbin, A. Fereidoon, and J. Ghorbani . . . . . . . . . . . . . . . . . . . . . . . . . . .489665. 69665.1

Modeling the Residual Strength of a Fibrous Composite Using the Residual Daniels Function - Yu. Paramonov, V. Cimanis, S. Varickis, and M. Kleinhofs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49665.7703. 7703.03

Hydrothermoelastic Stability of Functionally Graded Circular Cylindrical Shells Containing a Fluid - S. A. Bоchkarev, S. V. Lekomtsev, and V. P. Matveenko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5615.07703. 7703.17703.

A Multiscale Analysis of the Residual Stresses Occurring During Cooling Process of Thick-Walled Unidirec-tionally Filament-Wound Cylinders - H. Memarianfard and R. A Turusov . . . . . . . . . . . . . . . . . . . . 5615.21 7703.37703.

Structure and Properties of Modified Plasma-Sprayed Composite Coatings on a Titanium Base - S. V. Mal’tseva, I. P. Mel’nikova, A. V. Lyasnikova, and A. M. Zaharevich . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5615.31 7703.5615.1

Pyroelectromagnetic Effects of a Piezocomposite in the Binary Refinement of the Method of Quasi-Periodic Polydisperse Correlation Components - A. A. Pan’kov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5615.35615. 7703.5615.7703.

Analysis of the Mechanical Properties of Mortar Reinforced with Long Unidirectional Alfa Fibers in Different Curing Condition - I. Miraoui, S. Jaballi, and H. Hassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5615.45615. 7703.7703.3

Investigation of Thermal and Chirality Effects on Vibration of Single-Walled Carbon Nanotubes Embedded in a Polymeric Matrix Using Nonlocal Elasticity Theories - T. Bensattalah, T. H. Daouadji, M. Zidour, A. Tounsi, and E. A. Adda Bedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5615.5615.5615. 7703.85615.

Brief Communication - Increasing the Transverse Stiffness of a Soft Armor Package Based on Twaron Fabric by using Electromagnetic Treatment - S. M. Shebanov, I. K. Novikov, O. B. Ananyin, A. V. Pavlikov, and I. A. Gerasimov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5615.69665. 803




Volume 52, Number 5 November, 2016

CONTENTSEngl./Russ.

Theoretical-Experimental Method for Evaluating the Elastic and Damping Characteristics of Soft Materials Based on Studying the Resonance Flexural Vibrations of Test Specimens - V. N. Paimushin, V. A. Firsov, I. Gyunal, and V. M. Shishkin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .571813. 81813.3

Finite-Layer Method: Evaluation of Stresses and the Modal Components of Energy Release Rate on the Midplane of Edge-Cracked Composite Specimens - A. M. Timonin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583 831813.

Stress Fields at the Tip of a Sharp Inclusion on the Interface of a Bimaterial - G. Mieczkowski . . . . . . . . . . . . . . .601813. 857

Estimation of the Residual Fatigue Life of Laminated Composites under a Multistage Cyclic Loading - V. Strizhius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61813.1813. 871813.

Experimental Study on the Mechanical, Creep, and Viscoelastic Behavior of TiO2/Glass/Epoxy Hybrid Nano-composites - H. R. Salehi and M. Salehi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .623 887

Еmployment of the Rheological Characteristics of Polymer Solutions in Modeling Film Production - H. N. A . Al Joda, G. V. Pyshnograi, A. B. Shipovskaya, Yu. B. Tregubova, and S. A. Zinovich . . . .637 905

Revisiting the Numerical Convergence of Cohesive-Zone Models in Simulating the Delamination of Composite Adhesive Joints by Using the Finite-Element Analysis - P. F. Liu, Z. P. Gu, and Z. H. Hu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .651813. 923

Vibrations of Circular Composite Plates on an Elastic Foundation under the Action of Local Loads - E. I. Starovoitov, and D. V. Leonenko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665 943

Effect of Surface and Interface Energies on the Nonlinear Bending Behaviour of Nanoscale Laminated Thin Plates - M. Xu, B. L. Wang, and A. Yu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 673 955

Hybrid Laminates for Application in North Conditions - V. V. Antipov, E. I. Oreshko, V. S. Erasov, and N. Yu. Serebrennikova . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .687 973

Incremental Carcass Theory of Polycrystalline Media at Large Elastic and Plastic Deformations - V. M. Akhundov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .699 991813.

Juris Jansons (1813.939-201813.6) - Editorial Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71813.1813. 1813.009

ERRATUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71813.3

ERRATUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71813.4




Volume 52, Number 6 January, 2017

CONTENTSEngl./Russ.

Refined Deformation Model for Metal-Composite Plates of Regular Layered Structure in Bending under Condi-tions of Steady-State Creep - A. P. Yankovskii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7151017. 1017

Simulation of a Novel Joining Process for Fiber-Reinforced Thermoplastic Composites and Metallic Compo-nents - M. Gude, A. Freund, C. Vogel, and R. Kupfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 733 1043

Steady-State Creep of a Composite Rod in Tension in the Presence of an Aggressive Environment - L. Fomin . . . . . .741 1051017.51017.

Comparison of Fracture Characteristics of Open-Hole-Notch Carbon-Fiber-Reinforced Composites Subjected to Tensile and Compressive Loadings - M.-U. Saeed, Z. F. Chen, Z. H. Chen, and B. B. Li . . . . . . .751017.1 1069

Influence of Stacking Sequence on the Impact and Postimpact Bending Behavior of Hybrid Sandwich Compos-ites - M. Özen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751017.9 1081

Mechanical Properties of a Unidirectional Basalt-Fiber-Reinforced Plastic under a Loading Simulating Opera-tion Conditions - D. S. Lobanov and S. V. Slovikov . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .767 1091

Theoretical Analysis of Thermal Shock Resistance of Ceramic Foam Coatings - Y. X. Zhang and B. L. Wang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .773 1099

Safety Factor of Anisotropic Bars in the Space of Generalized Forces - K. E. Sibgatullin and E. S. Sibgatullin . . . .781 1109

Free and Forced Vibration of Beams Strengthened by Composite Coats Subjected to Moving Loads - S. Tekili, Y. Khadri, B. Merzoug, E. M. Daya, and A. Daouadji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 789 1119

Changes in the Thermal and Dimensional Stability of the Structure of a Polymer Composite after Carboniza-tion - V. E. Gaidachuk, A. V. Kondratiev, and A. V. Chesnokov . . . . . . . . . . . . . . . . . . . . . . . . . . . . .799 1131

Effect of Thermal Cycling on the Tensile Behavior of Polymer Composites Reinforced by Basalt and Carbon Fibers - S. Mohammad Reza Khalili, Moslem Najafi, and Reza Eslami-Farsani . . . . . . . . . . . . . . . .807 1141

Effects of Particle Size and Particle Loading on the Tensile Properties of Iron-Ore-Tailing-Filled Epoxy and Poly-propylene Composites - M. A. Onitiri and E. T. Akinlabi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .817 1151017.51017.

Effect of Matrix Multicracking on the Hysteresis Loops of Carbon-Fiber-Reinforced Cross-Ply Ceramic-Matrix Composites - L. B. Li . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829 1169

An Analysis of Form Changes of a Toroidal Body with a Meridional Arrangement of Fibers on the Basis of the Two-Level Carcass Theory and of a Homogeneous Body Congruent to It - V. M. Akhundov . . . . . . .843 1189


Documents

MECHANICS OF COMPOSITE MATERIALS · Finite-Layer Method: Bending and Twisting of Laminated Plates with ... Strength of the Joint of an Anisotropic Composite and a Cylindrical Element