Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 1 of 2
DJMIT Academic Year: 2015-16
Name of Teacher : MR.SANJAY PANCHAL/MR.RAJESH PANCHAL
Subject Name (Code) : WORKSHOP PRACTICE (2110012)
Semester/Division (Dept) : 2ND
(CIVIL)
Subject Shared with : MR.RAJESH
PANCHAL
Theory/ Tutorial/ Practical: Practical Days:
THURSDAY,SATURDAY
Hrs./Week:04
LESSON PLANNING
Sr. Name of Topic Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code
Remarks
1 Introduction to various shops / sections and workshop layouts
4 28/1/2016 5
2 Safety norms to be followed in a workshop should be conveyed to
students
4 11/2/2016 5
3 Demonstration of hand tools 4 25/2/2016 5
4 power tools, machine tools 4 10/3/2016 5
5 basic measuring instruments 4 26/3/2016 5
6 materials 4 31/3/2016 5
7 Marking and measurement in Carpentry
4 7/4/2016 5
8 Fitting, Smithy 4 16/4/2016 5
9 Welding 4 28/4/2016 5
10 Tin smithy 4 30/4/2016 5
11 Plumbing and Machine shop.
4 5/5/2016 5
12 full sectional view 4 12/5/2016 5
REFERENCES:
Sr. Name of Book Author/s Publication Details
1 Mechanical Workshop Practice K C John PHI Learning
2 Workshop Technology Vol. 1 and
2
Raghuvanshi B.S. Dhanpat Rai & Sons
3 Workshop Technology Chapman W.A. J and
Arnold
E. Viva low priced student
edition
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 2 of 2
TEACHING AID CODE
1. O.H.P. 2. L.C.D. Projector 3. Model
4. Chart 5. Other
Note: Remark column is useful to write for covering of slippage or for remedial plan.
Sign. of Subject Teacher Sign. of HOD
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 1 of 2
DJMIT Academic Year: 2015-16
Name of Teacher : MR.SANJAY PANCHAL/MR.RAJESH PANCHAL
Subject Name (Code) : WORKSHOP PRACTICE (2110012)
Semester/Division (Dept) : 2ND
(MECHANICAL)
Subject Shared with : MR.RAJESH PANCHAL
Theory/ Tutorial/ Practical:
Practical
Days:
MONDAY,TUESDAY,WEDNESDAY,FRIDAY
Hrs./Week:04
LESSON PLANNING
Sr. Name of Topic Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code
Remarks
1 Introduction to various shops / sections and workshop layouts
4 28/1/2016 5
2 Safety norms to be followed in a workshop should be conveyed to
students
4 8/2/2016 5
3 Demonstration of hand tools 4 15/2/2016 5
4 power tools, machine tools 4 22/2/2016 5
5 basic measuring instruments 4 29/2/2016 5
6 materials 4 8/3/2016 5
7 Marking and measurement in Carpentry
4 15/3/2016 5
8 Fitting, Smithy 4 22/3/2016 5
9 Welding 4 30/3/2016 5
10 Tin smithy 4 5/4/2016 5
11 Plumbing and Machine shop.
4 12/4/2016 5
12 full sectional view 4 18/4/2016 5
REFERENCES:
Sr. Name of Book Author/s Publication Details
1 Mechanical Workshop Practice K C John PHI Learning
2 Workshop Technology Vol. 1 and
2
Raghuvanshi B.S. Dhanpat Rai & Sons
3 Workshop Technology Chapman W.A. J and
Arnold
E. Viva low priced student
edition
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 2 of 2
TEACHING AID CODE
1. O.H.P. 2. L.C.D. Projector 3. Model
4. Chart 5. Other
Note: Remark column is useful to write for covering of slippage or for remedial plan.
Sign. of Subject Teacher Sign. of HOD
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 1 of 3
DJMIT Academic Year: 2015-16
Name of Teacher : PROF.YAGNESH SHRIMALI/ PROF.AMIT PATEL
Subject Name (Code) : ENGINEEERING GRAPHICS (2110013)
Semester/Division (Dept) : 2ND
(CIVIL)
Subject Shared with : PROF.AMIT PATEL
Theory/ Tutorial/ Practical: Theory Days:
MONDAY,TUESDAY,THURSDAY
Hrs./Week:03
LESSON PLANNING
Sr. Name of Topic Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code
Remarks
1. Introduction to Engineering Graphics: :
i. Drawing
instruments and accessories, BIS – SP 46
1 28/1/2016 5
ii. Use of plane scales, Diagonal Scales
and Representative Fraction
1 1/2/2016 5
2. Projections of Planes:
i. Projections of planes (polygons,
circle and ellipse)
2 2/2/2016 5
ii. its inclination to one reference plane and with two reference planes
1 4/2/2016 5
iii. Concept of auxiliary plane 1 8/2/2016 5
iv. method for projections of the plane 2 9/2/2016 5
3.Projections of Solids and Section of Solids:
i. Classification of solids
1 11/2/2016 5
ii. Projections of solids (Cylinder, Cone, Pyramid and Prism)
1 15/2/2016 5
iii. Projections of solids along with frustum with its inclination to one
reference plane
2 16/2/2016 5
iv. Projections of solids two reference
planes
1 18/2/2016 5
v. true shape of the section 1 22/2/2016 5
4. Engineering Curves:
i. Classification and application of Engineering Curves
1 23/2/2016 5
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 2 of 3
ii. Construction of Conics 1 25/2/2016 5
iii. Cycloid Curves 1 29/2/2016 5
iv. Involutes 1 1/3/2016 5
v. Spirals along with normal and
tangent to each curve
2 3/3/2016 5
5. Projections of Points and Lines
i. Introduction to principal
planes of projections
1 8/3/2016 5
ii. Projections of the points located in
same quadrant and different quadrants
1 10/3/2016 5
iii. Projections of line with its inclination
to one reference plane
1 14/3/2016 5
iv. , Projections of line with with two
reference planes
1 15/3/2016 5
v. True length and inclination with the
reference planes
2 17/3/2016 5
6.Orthographic Projections:
i. Fundamental of projection along with classification
2 21/3/2016 5
ii. Projections from the pictorial view of the object on the principal planes for view from
front
2 22/3/2016 5
iii. top and sides using first angle
projection method and third angle projection method
2 28/3/2016 5
iv. full sectional view 1 29/3/2016 5
7.Isometric Projections and Isometric View or Drawing:
i. Isometric Scale 1 31/3/2016 5
ii. Conversion of orthographic views
into isometric projection
2 4/4/2016 5
iii. Conversion of orthographic views into isometric projection
3 5/4/2016 5
REFERENCES:
Sr. Name of Book Author/s Publication Details
1 Elementary Engineering Drawing N.D.Bhatt Charotar Publishing House,
Anand
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 3 of 3
2 A text book of Engineering
Drawing
R.K.Dhawan S.Chand & Company Ltd.,
NewDelhi
3 A text book of Engineering
Drawing
P.S.Gill S.K.Kataria & sons
4 Engineering Drawing Agrawal and C M
Agrawal Tata McGraw Hill, New
Delhi
TEACHING AID CODE
1. O.H.P. 2. L.C.D. Projector 3. Model
4. Chart 5. Other
Note: Remark column is useful to write for covering of slippage or for remedial plan.
Sign. of Subject Teacher Sign. of HOD
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 1 of 2
DJMIT Academic Year: 2015-16
Name of Teacher : PROF. MAHESH CHAVDA
Subject Name (Code) : ENGINEERING GRAPHICS(2110013)
Semester/Division (Dept): 1ST ( MECHANICAL ) Subject Shared with : PROF.DARSHAN
GAJDHAR
Theory/ Tutorial/ Practical: Theory Days: 2 Hrs./Week: 2
LESSON PLANNING
Sr. Name of Topic Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code
Remarks
1. Introduction :
1 INTRODUCTION TO ENGINEERING
GRAPHICS:
1 Other
2 Drawing instruments and accessories 1 Other
3 BIS – SP 46 1 Other
4 Use of plane scales and diagonal scales
1 Other
5 Representative Fraction 2 Other
2 ORTHOGRAPHIC PROJECTIONS: Other
6
Principle of projection, Principal planes of
projection
2 Other
7
Projections from the pictorial view of the
object on the principal planes for View
from Front
1 Other
8
View from Top and View from Side using
first angle projection method and third
angle projection method
1 Other
9 Full Sectional View 1 Other
3 ISOMETRIC PROJECTIONS AND
ISOMETRIC VIEW OR DRAWING:
1 Other
10 Isometric Scale,
11 Conversion of orthographic views into
Mechanical Engineering Department
Dr. Jivraj Mehta Institute of Technology, Mogar,
Anand
Page 2 of 2
isometric projection
12 Isometric view or drawing.
REFERENCES:
Sr. Name of Book Author/s Publication Details
1 Modern Refrigeration and Air-
conditioning Desai P.S Khanna Publishers
2 Refrigeration and Air Conditioning Manohar Prasad Prentice Hall of India PVT Ltd
3 Refrigeration and Air Conditioning Jordon and Prister Tata Mc Graw Hill
4 ‘Refrigeration and Air-
Conditioning
S C Arora & S Domkundwar
Dhanpat Rai
Sons
TEACHING AID CODE
1. O.H.P. 2. L.C.D. Projector 3. Model
4. Chart 5. Other
Note: Remark column is useful to write for covering of slippage or for remedial plan.
Sign. of Subject Teacher Sign. of HOD
Sr. No.Proposed
Date
Lecture
Hours
Total Hours
RequiredRemarks
System of Linear Equations & Matrices
1 Introduction of the subject defination of matrics 02-01-16 1
2 Introduction of linear equation augmented matrix with example 02-03-16 1
3 Elementry row echelon form 4/2/2016 & 8/2/2016 2
4 Reduced row echelon form 10/2/2016 & 11/2/2016 2
5 Gauss elimination method and condition of consistant and inconsistance
system
15/2/2016 & 17/2/2016 2
6 Gauss Jordan method 18/2/2016 1
7 Inverse of a matrix by row operation 22/2/2016 1
8 solution of system using inverse 24/2/2016 & 25/2/2016 2
9 Rank by determinant and raw operation 29/2/2016 1
10 Inverse by determinant 2/3/2016 & 3/3/2016 2
11 Row space,column space and null space 03-07-16 1
12 Linear Transformation & Eigen Value & Eigen Vector
13 Introductin of eigen value and eigen vector 9/3/2016 & 10/3/2016 2
14 Properties of eigen value and eigen vector 14/3/2016 1
15 Cayley Hemiltonian theorm 16/3/2016 & 17/3/2016 2
16 Diagonalization of matrix,Algebric multiplicity if a eigen value 21/3/2016 1
17 linear transformation from Rn to Rm 23/3/2016 & 28/3/2016 2
18 Linear opration properties of L.T 31/3/2016 1
19 Matrix represtation of L.T,similar matrix 4/4/2016 & 6/4/2016 2
20 Linear Combination & Linear Independence
21 Introduction of vector and vector space and its properties 04-07-16 1
22 Sub space and its properties 11/4/2016 & 13/4/2016 2
23 Linearly dependence and independence 14/4/2016 & 18/4/2016 2
24 Expansion of Basis 20/4/2016 1
25 Linealy span of a matrix 21/4/2016 & 25/4/2016 2
26 Vector Function
27 Vector function and differntiation 02-03-16 1
28 Arc length,curvature 02-04-16 1
29 Gradient of a scalar function 02-10-16 1
30 Directional Derivative of a scalar function 11/2/2016 & 17/2/2016 2
31 Divergence and curls of a scalar function 18/2/2016 1
32 Innear Product Space
34 Orthogonal set,normalization 24/2/2016 & 25/2/2016 2
35 Gram schmidth orthogonalization 2/3/2016 & 3/3/2016 2
36 Orthogonality of inner space 9/3/2016 to 16/3/2016 3
37 least square approximation 17/3/2016 1
UNIT-2 8
UNIT-5 6
UNIT-4 11
DEPARTMENT : ME
Topic Name
UNIT-1 16
UNIT-3 11
DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGYMATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT
LESSON PLANNING
FACULTY: PROF. RIDDHI PATEL SEMESTER: 2
SUBJECT: VECTOR CALCULUS AND LINEAR ALGEBRA (2110015) ACADEMIC YEAR: 2015-2016
39 Diagonalization of symetric metrix 23/3/2016 & 30/3/2016 2
40 Application of canonical form and quadretic form 31/3/2016 1
41 Vector Calculus
42 line intigral and linear intigral path 04-06-16 1
43 Green's theorm,surface and volume integral 7/4/2016 & 13/4/2016 2
44 stock's theorm,Divergence theorm of raws divergence 20/4/2016 & 27/4/2016 4
59
UNIT-6 7
Subject Coordinator : Prof. Riddhi Patel HOD Maths,Applied Sci. & Humanities Principal
UNIT-4 11
Sr. No.Proposed
Date
Lecture
Hours
Total Hours
RequiredRemarks
1 Who is a Contributor
2 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 2.2.16 1
3 (Vol I) 2.2.16 1
4 1 hour Presentations and Projects 4.2.16 1
5 The Contributor’s identity
6 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 9.2.16 1
7 (Vol I) 9.2.16 1
8 1 hour Presentations and Projects 11.2.16 1
9 Embarking on the journey to contributorship
10 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 16.2.16 1
11 (Vol I) 16.2.16 1
12 1 hour Presentations and Projects 18.2.16 1
13 Design Solutions
14 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 23.2.16 1
15 (Vol I) 23.2.16 1
16 1 hour Presentations and Projects 25.2.16 1
17 Design Solutions
18 2 hours Theory and practice exercises based on Contributor Personality Program Workbook 23.2.16 1
19 (Vol I) 23.2.16 1
20 1 hour Presentations and Projects 25.2.16 1
21 Resume Building
22 2 hours for Concepts, Tools, and Techniques 1.3.16 2
23 4.3.16 1
24 2 hours for Projects 8.3.16 1
25 Group Discussions (GDs)
26 2 hours for Concepts, Tools, and Techniques 8.3.16 1
27 11.3.16 1
28 2 hours for Projects and Practice 15.3.16 2
29 Interview Skills
30 2 hours for Concepts, Tools, and Techniques 18.3.16 1
31 22.3.16 2
32 2 hours for Projects and Practice 29.3.16 1
27TOTAL
Subject Coordinator: Prof. Mihir Trivedi HOD Maths,Applied Sci. & Humanities Principal
UNIT-13 4
UNIT-14 4
UNIT-6 3
UNIT-7 3
UNIT-15 4
UNIT-8 3
DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGYMATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT
LESSON PLANNING
FACULTY: PROF. MIHIR TRIVEDI SEMESTER: II
SUBJECT: CPD (2990001) ACADEMIC YEAR: 2015-2016
DEPARTMENT : MECHANICAL
Topic Name
UNIT-1 3
UNIT-2 3