measuring toolsUNIVERSAL BEVEL PROTRACTOR with magnifier • stainless steel, chrome finished • reading 0.05 mm • 1/20 mm + 1/28“ 0 5 • made of alloyed steel • tolerance

• madeofalloyedsteel• groundandhardenedinpairs• tolerance±0.01mm• markedlaserdimensionsmm• onwoodstandsorwoodencase

PARALLEL STEEL SET

measuring toolsmeasuring toolsPRECISE CALCULATED 2020 catalogue No. 23

valid until 31.12.2020

hardened, HRC 60 ±2, “TOP“, parallelism + 0.010 mm

toleranceheight±0.01mmtolerancewidth±0.01mmtolerancelength±0.5mmtoleranceinpairs±0.01mm

Range Thickness mm Size mm Weight

100 mm 2, 3, 4, 5, 62 x 5 | 2 x 10 | 2 x 15 | 2 x 20 | 3 x 6 | 3 x 11 | 3 x 16 | 3 x 21 | 4 x 7 | 4 x 12 | 4 x 17 | 4 x 22 | 5 x 8 | 5 x 13| 5 x 18 | 5 x 23 | 6 x 9 | 6 x 14 | 6 x 19 | 6 x 24

2.8 kg

• steeltaper,brushedchromium-plated• handleanodisedaluminium• reading0.1mm• taper1:10

BORE GAUGE, CONICALfor measuring of conical bores

Order.-No. Dimensions Taper-length Length Euro/Pc.88082040 1- 6.5 mm 65 mm 122 mm 42,-88082041 3 - 15 mm 135 mm 190 mm 49,-88082042 15 - 30 mm 165 mm 250 mm 64,-

newnew

• forgapdimensions• reading0.1mm• steel,hardenedandgroundonallsides,chromium-plated,laserscale• handleknurled,scaleCNC-divided• handlelength27mm

TAPER SLOT GAUGEsteel brushed chromium-plated or ABS-plastic, reading 0.1 mm

Order.-No. Dimensions Material Range Weight Euro/Pc.

88082025 125 x 8 x 8 mm steel 0.5 - 7.0 mm 39 g 37,-

88082026 109 x 8 x 8 mm steel 2.0 - 7.0 mm 38 g 37,-

88082027 165 x 12 x 8 mm steel 0.5 - 11.0 mm 62 g 43,-

88082028 165 x 12 x 8 mm plastic 0.5 - 11.0 mm 17 g 43,-

LIMIT PLUG GAUGE SET, 17 PARTSDIN 7150-2/7164, sizes DIN 2245

• madeofhardenedsteel• toleranceH7,GO-andNOGO• size:3,4,5,6,8,10,12,14,16,

18,20,22,24,25,28,30,32

Order-No.: 88086106Order-No.: 88086106

295,-295,- Euro

Range Thickness mm Height mm Weight

150 mm 1014 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 35 40 | 45 | 50

10.4 kg

14 pairs

20 pairs

Order-No.: 86062096Order-No.: 86062096

470,-470,- Euro

Order-No.: 86062090Order-No.: 86062090

390,-390,- Euro

toleranceheight±0,01mmtolerancewidth±0,02mmtolerancelength±0,5mmtoleranceinpairs±0,01mm

usablewithorwithoutroll(fittingincluded)

certificationtoVDI/VDE/DGQ2618:Order-No.80000100,Euro10,-

page 2 All prices plus statutory VAT. No liability for misprints! While stocks last! Technical and optical changes reserved! All prices plus statutory VAT. No liability for misprints! While stocks last! Technical and optical changes reserved! page 3

Order-No. Range Locking Jaw length Euro/Pc.81002007 150 mm screw 40 mm 12,-81002006 150 mm auto lock 40 mm 12,-

• range150mm• scaleandnoniusbrushedchromium-plated• 4-waymeasurements• jawlength40mm• backsidewithscrewtable• nonius1/20+1/128”• incase

VERNIER CALIPER DIN 862with locking screw

Order-No.: 81001002Order-No.: 81001002

18,-18,- Euro

• brushedchromium-plated,hardened• 4-waymeasurements• backsidewiththreadscrewtable• incase

VERNIER CALIPERrange 150 mm


• range150mm• scaleandnoniusbrushedchromium-plated• 4-waymeasurements• jawlength40mm• backsidewithscrewtable• nonius1/20+1/128”• incase

VERNIER CALIPER DIN 862with auto lock

Order-No.: 81001001Order-No.: 81001001

18,-18,- Euro

• stainlesssteel,hardened• 4-waymeasurements• jawlength40mm• reading0.01mm/0.0005“• dataoutputRB2• incase

DIGITAL VERNIER CALIPER DIN 862range 150 mm

Order-No.: 82026100Order-No.: 82026100

24,-24,- Euro


certificationtoVDI/VDE/DGQ2618:Order-No.80000100,Euro10,--

• range150mm• stainlesssteel,hardened• jawlength40mm• 4-waymeasurements• accuracy0.03mm• reading0.01mm/0.0005“• dataoutputRB5• incase

DIGITAL VERNIER CALIPER DIN 862with carbide measuring surface, HOLD

Order-No.: 82026033Order-No.: 82026033

52,-52,- Euro • stainlesssteel,hardened

• jawlength40mm• 4-waymeasurements• displayheight17mm• accuracy0,03mm• reading0.01mm/0.0005“• zeroing-andon/off-button,mm/inch• incase

DIGITAL VERNIER CALIPER DIN 862with big display, range 150 mm

Order-No.: 82026036Order-No.: 82026036

34,-34,- Euro


• stainlesssteel,hardened• 4-waymeasurements• accuracy0.03mm• reading0.01mm/0.0005“• dataoutputRB5• incase

DIGITAL VERNIER CALIPER DIN 862with glass rail and metal casing

• stainlesssteel,hardened• 4-waymeasurements• withglassrail• dataoutputRB6• incase

DIGITAL VERNIER CALIPER DIN 862with glass rail, absolut-system, ABS, HOLD

Order.-No. Range Jaw length Euro/Pc.82026240 150 mm 40 mm 33,-82026241 200 mm 50 mm 60,-82026242 300 mm 60 mm 90,-



Order.-No. Range Jaw length Euro/Pc.82026210 150 mm 40 mm 60,-82026211 200 mm 50 mm 78,-82026212 300 mm 60 mm 98,-



Order-No. Range Base Euro/St.81015041 150 mm 100 mm 17,-81015043 200 mm 100 mm 20,-81015048 300 mm 100 mm 30,-


DIGITAL VERNIER CALIPER DIN 862

DIGITAL VERNIER CALIPER DIN 862


• range100mm• stainlesssteel,hardened• monoblock• nonius1/20-39• incase

SMALL-VERNIER CALIPERwith narrow jaw und narrow cross points

Order-No.: 81004037Order-No.: 81004037

38,-38,- Euro

• stainlesssteel,hardened• metalcasing• reading0.01mm/0.0005“• incase

DIGITAL VERNIER CALIPER, RANGE 70 MMwith narrow jaw and cross points

Order-No.: 82026179Order-No.: 82026179

50,-50,- Euro


newnew

DIAL CALIPER DIN 862reading 0.01 or 0.02 mm

• stainlesssteel• scaleandnoniusbrushedchromium-plated• boxfortransport

CONTROL CALIPER, LIGHTWEIGHT VERSIONwith or without points, DIN 862

Order-No. Range Reading Jaw length Euro/Pc.81004020 150 mm 0,02 mm 40 mm 35,-81004021 150 mm 0,01 mm 40 mm 37,-81004022 200 mm 0,02 mm 50 mm 43,-81004023 200 mm 0,01 mm 50 mm 52,-

• stainlesssteel,hardened• 4-waymeasurements• backsidewiththreadscrewtable• dialØ38mm• incase

withoutpoints

withpoints

• stainlesssteel• reading0.01mm/0.0005“• worksstandard• boxfortransport

DIGITAL CONTROL CALIPERwith fine adjustment, with or without points, HOLD

withoutpoints

withpoints

• stainlesssteel,hardened• nonius1/20=0.05mm• scaleandnoniusbrushedchromium-plated• incase

DEPTH VERNIER CALIPER DIN 862base 100 mm

• rodmadeofaluminium,canbecutoff• displaymm/inch/bruch• reading0.01mm/0.0005“• connectioncableca.2m• backsideswithmagnet

DIGITAL BUILT-IN CALIPERwith ABS-system and external display, absolut-system

Order-No. Range Euro/Pc.82026350 200 mm 145,-82026351 300 mm 170,-82026352 600 mm 240,-

Order-No. Range Jaw length Euro/Pc.81009005 200 mm 60 mm 55,-81009006 250 mm 80 mm 68,-81009007 300 mm 100 mm 88,-

Order-No. Range Jaw length Euro/Pc.81009014 200 mm 60 mm 50,-81009015 250 mm 80 mm 60,-81009016 300 mm 100 mm 75,-

Order-No. Range Jaw length Euro/Pc.82027005 300 mm 60 mm 98,-82027011 300 mm 90 mm 115,-

Order-No. Range Jaw length Euro/Pc.82026055 200 mm 75 mm 85,-82026056 300 mm 90 mm 100,-

0.02mm

0.01mm

certificationtoVDI/VDE/DGQ2618until300mm:Order-No.80000100,Euro10,-

certificationtoVDI/VDE/DGQ2618until300mm:Order-No.80000100,Euro10,-


• DIN2270,shockproof• feelerlegth14.5mm• measuringinsertØ2mmcarbideball• automaticreversalofmeasurementdirection• withdovetailguide• incl.clampingshaftØ6mmandØ8mm• reading0.01mm,measuringspan0.8mm• incase

DIAL TEST INDICATORhorizontal type

Order-No.: 81025050Order-No.: 81025050

28,-28,- Euro

DIAL TEST INDICATORvertical type

• metalcase• clampingshaft8h6• reading0.01mm• 1rotation1mm• withtolerancepointers• dialfacecanberotatedbyouterring• incase

DIAL INDICATOR WITH TOLERANCE POINTERSworks standard

DIAL INDICATOR WITH REVERSED SCALErange 10 mm, reading 0.01 mm

Order-No.: 81023009Order-No.: 81023009

28,-28,- Euro

Setrange0-100mm

Order-No.: 81025055Order-No.: 81025055

36,-36,- Euro

• worksstandard• metalcase• clampingshaft8h6• reading0.01mm• withtolerancepointers• dialfaceØ56mmcanberotatedbyouterring• incase

• inductivesystemwithhighrepeataccuracy• withLCDdisplay• clampingshaft8h6• reading0.001mm/0.0005”

DIGITAL DIAL INDICATORwith inductive system, RB7

• scalechromefinished• stainlesssteel• spindleØ6.5mm,threadpitch0.5mm• reading0.01mm• withratchet• fromrange25-50mmwithsettinggauges• inwoodencase

OUTSIDE MICROMETER DIN 863with carbide measuring faces, single or 4 parts

• withliftmechanism• withdigitaldialindicator• range0-10mm• throatdepth30mm,discø10• accuracy0.04mm• rodanddiscstainlesssteel• framecastiron• incase

DIGITAL THICKNESS GAUGEreading 0.01 mm or 0.0005“

Order-No.: 82027071Order-No.: 82027071

95,-95,- Euro

Order-No. Range Euro/Pc.81017050 0 - 25 mm 24,-81017051 25 - 50 mm 26,-81017052 50 - 75 mm 28,-81017053 75 - 100 mm 30,-81017054 100 - 125 mm 35,-81017055 125 - 150 mm 42,-

Order-No.: 81017065Order-No.: 81017065

105,-105,- Euro

• DIN2270,shockproof• feelerlegth14.5mm• scale0-40-0• measuringinsertØ2mmcarbideball• automaticreversalofmeasurementdirection• withdovetailguide• incl.clampingshaftØ6mmandØ8mm• reading0.01mm,measuringspan0.8mm• incase

Order-No. Range Accuracy Bezel Euro/Pc.81023005 10 mm 17 µm 56 mm 18,-81024005 30 mm 34 µm 58 mm 40,-

Order-No. Range Accuracy Repeat accuracy Ø Euro/Pc.82031030 12.7 mm 10 µm 4 µm 56 80,-82031031 25.0 mm 15 µm 5 µm 56 100,-82031032 50.0 mm 25 µm 8 µm 84 140,-

4 parts


• framecoated• thimblechromefinished• measuringfaceslappedasfineø6.5mm• from25mmwithsettinggauges• reading0.001mm/0.00005“• withratchet• accuracyDIN863• incase

DIGITAL OUTSIDE MICROMETERwith carbide measuring faces, HOLD, ABS

• carbidemeasuringfaceslappedasfine• reading0.001mm/0.00005”• from25mmwithsettinggauges• spindleø6.5mm• withfrictionratchet• accuracyDIN863• incase

DIGITAL OUTSIDE MICROMETERwith carbide measuring faces, ABS

MICROMETER STANDfor micrometer until 200 mm, 1.5 kg

MICROMETER STANDfor micrometer until 300 mm, 2 kg

• withfineadjustment• readingchromefinished• parallaxfreereading• scale,4x90°,reading1/12°=5“• withadditionalangle• incase

UNIVERSAL BEVEL PROTRACTORwith magnifier

• stainlesssteel,chromefinished• reading0.05mm• 1/20mm+1/28“• carbidepoint,exchangeable

MARKING VERNIER CALIPERwith roll

• 0-300mm• metalcase• stainlesssteel• reading0.01mm/0.0005”• PRESET-function• withcarbidepoint• withfineadjustment

HEIGHT AND MARKING GAUGEwith driving wheel

drivingwheel

Order-No.: 81018040Order-No.: 81018040

32,-32,- Euro

Order-No.: 81018035Order-No.: 81018035

18,-18,- Euro

Order-No.: 82027105Order-No.: 82027105

225,-225,- Euro

• 0-300mm• withfineadjustmentandmagnifier• nonius1/20mm• madeoftoolsteel• support8.3x11mm• scalesettingchromefinished• reading0.05mm• accuracyDIN862

with magnifier

Order-No.: 86067015Order-No.: 86067015

98,-98,- Euro

HEIGHT AND MARKING GAUGE

• accuracy0.01mm• max.rotation600r.p.m.• support10ø

rotating spindleEDGE FINDER

Order-No. Length ø Euro/Pc.81027096 84 mm 10 mm 6,-81027097 94 mm 10 + 4 mm 7,-

ø10+4mm

Order-No. Range Euro/Pc.82029105 0 - 25 mm 85,-82029106 25 - 50 mm 97,-82029107 50 - 75 mm 110,-82029108 75 - 100 mm 125,-

Order-No. Range Euro/Pc.82029090 0 - 25 mm 68,-82029091 25 - 50 mm 80,-82029092 50 - 75 mm 90,-82029093 75 - 100 mm 100,-

Order-No. Range Euro/Pc.85057015 200 mm 22,-85057016 400 mm 35,-


ø10

magnifier4 parts

• withfineadjustment• base62x50x55mm,M8• fordialIndicatorwith8mmshank• withdovetailguide• magneticforce80kg• withon/offswitchandprismaticbase• inbox

MAGNETIC DIAL SUPPORTwith central clamping

• totalheight430mm• withfineadjustment• base62x50x55mm,M8• fordialIndicatorwith8mmshank• withdovetailguide• magneticforce80kg• withon/offswitchandprismaticbase

MAGNETIC DIAL SUPPORTwith central clamping

• inbox

DIAL INDICATOR AND SUPPORT SET2 parts in box with central clamping

Order-No.: 81005028Order-No.: 81005028

165,-165,- Euro

• reading0.05°• accuracy0.5°• displayallwaysatcorrectdirection

DIGITAL LEVEL WITH MAGNETIC BASErange 4 x 90°

Order-No.: 86071994Order-No.: 86071994

28,-28,- Euro

• blackaluminium(HR63)• flatpattern• mm-graduationwith0.05mmreading

MARKING GAUGEmade of aluminium

• totallength120mm• lens21Ømm• 40diopter• 3xAAAbatteryrequired(notincluded)

MAGNIFIERwith two LED-lights

55 x 56 x 19 mm

Magnetic Dial Supports

Height Base (LxBxH) mm Magnetic force

383 mm 62 x 50 x 55, M8 80 kg

Dial Indicator

Range Reading Accuracy Bezel

10 mm 0.01 mm 17 µm 56 mm

nonius 1/20 mm

Best-Nr. Total height Euro/Pc.86071040 333 mm 125,-86071044 423 mm 165,- Order-No.: 86071013Order-No.: 86071013

75,-75,- Euro


Order-No.: 81005084Order-No.: 81005084

12,-12,- Euro

• blade200x27x1.2mm• handle30x11.5mm

DIGITAL JOINERS ADJUSTABLEwith scale 180°, HOLD

Order-No.: 83017005Order-No.: 83017005

39,-39,- Euro

• 6-pcs.setsettingringØ5mm/Ø25mm• brushedchromium-plated• threadpitch0.5mm• reading0.01mm• inbox

INSIDE MICROMETER SETwith round carbide measuring faces

Order-No. Range Euro/Pc.81021098 5 - 100 mm 290,-

newnew


• madeofalloyedsteel• groundandhardenedinpairs• parallelism±0,010mm• tolerance±0.01mm• markedlaserdimensionsmm• hardenedHRC60±2• onwoodstands

PARALLEL STEEL SET, HARDENED, HRC 60 ±224 pair, thickness 8,10,12,14 mm, “TOP“

GAUGE BLOCK SETwith holder

• switchedmagnetforce• 100kgnominalforce• two90°grooves• 90°ontheside• accuracy0.01mm,DIN876/1• pairspairwisegrinded

MAGNETIC V-BLOCKaccuracy 0.01 mm, hardened

Order-No. Plane face Block gauges Euro/Pc.

86061055 30 mm1.4 | 2.5 | 5.1 | 7.7 | 10,. | 12.9 | 15.0 | 17.6 | 20.2 | 22.8 | 25.0 mm

270,-

• holdermadeofaluminium• blockgaugesspecialsteel,

hardened• accuracyDIN3650/1• opticalflat30mm,degree1• inbox

• formeasuringofcylindricalbores• stainlesssteel• graduationmmandinch• thickness1.2mm

BORE GAUGErange 0.1 - 15 mm (1/.005 - 5/8 inch)

DIGITAL JOINERS ADJUSTABLE

toleranceheight±0,01mmtolerancewidth±0,01mmtolerancelength±0,5mmtoleranceinpairs±0,01mm

Order-No. Length Size mm Weight Euro/Pc.

86062092 125 mm 8 x 11 | 8 x 16 | 8 x 21 | 8 x 26 | 8 x 31 | 8 x 36 | 10 x 13 | 10 x 18 | 10 x 23 | 10 x 28 | 10 x 33 | 10 x 38 | 12 x 15 | 12 x 20 | 12 x 25 | 12 x 30 | 12 x 35 | 12 x 40 | 14 x 17 | 14 x 22 | 14 x 27 | 14 x 32 | 14 x 37 | 14 x 42

14.8 kg 550,-

86062094 200 mm 24.0 kg 750,-

• numbersetched• stainlesssteel• 1-13mm,pitch0.5mm

WIRE AND TWIST-DRILL GAUGErange 1 - 13 mm

Order-No.: 88084013Order-No.: 88084013

1,501,50 Euro

Order-No.: 88082009Order-No.: 88082009

2,002,00 Euro

• forblindhole• withcarbidemeasuringfaces• accuracyDIN863

DIGITAL THREE POINT MICROMETERwith carbide measuring faces, HOLD, RB6

Order-No. Range Accuracy Euro/Pc.82030150 6 - 8 mm 0,004 mm 320,-82030151 8 - 10 mm 0,004 mm 320,-82030152 10 - 12 mm 0,004 mm 320,-82030153 12 - 16 mm 0,005 mm 260,-82030154 16 - 20 mm 0,005 mm 260,-82030155 20 - 25 mm 0,005 mm 320,-82030156 25 - 30 mm 0,005 mm 330,-82030157 30 - 40 mm 0,005 mm 350,-82030158 40 - 50 mm 0,005 mm 360,-82030159 50 - 63 mm 0,005 mm 380,-82030160 62 - 75 mm 0,005 mm 395,-82030161 75 - 88 mm 0,005 mm 415,-82030162 87 - 100 mm 0,005 mm 430,-


single pairSize (L x B x H) Order-No. Euro/Pc. Order-No. Euro/pair

70 x 54 x 73 mm 86065076 45,- 86065075 85,- 100 x 70 x 95 mm 86065078 55,- 86065077 105,-

24 pairs

• yellowlaqueredtapesteel• graduationonupperandloweredge• cm-figuresinblack,decimeterfiguresinredcolour• withstop,beltandloopclip

POCKET ROLLER MEASURING TAPES, EC IIin shock proof ABS case

• 13mmwidth• yellowlacqueredtapesteel• mm-graduationthroughoutonupperandloweredge• PVCcoatedsteelcase

STEEL MEASURING TAPES, EC IIwith mm-duplex

Order-No. Length Euro/Pc.89099030 10 m 18,-89099031 20 m 27,-89099032 30 m 40,-

• withspring• graduationmmbothsideonupperandloweredge• joints16x3mm

WOOD FOLDING RULEEG-class III

Order-No. Length Joints Euro/Pc.89089014 2 m 10 2,-89089019 3 m 15 7,-

• readingfromlefttoright• profile13x0.5mm• bothsidegraduation,mm+1/2mm• stainlesssteel,chromefinished• workstandard

STAINLESS STEEL RULESreading on both sides mm + 1/2 mm

• framemadeofaluminium• withtwospiritlevel• range±90°/99mm/m• displaywithbacklight• reading0.1°/1mm/m• displayallwaysatcorrectdirection• 2xAAAbattery

DIGITAL LIGHT-METAL SPIRIT LEVELSwith magnetic, ABS, HOLD

• directionadjustable• withpermamentmagneticbase15kg• baseø50x10mm,M4• height250mm• 3xAAAbatteryrequired(notincluded)

LED-LAMPwith magnetic base and adjustable focal lenght


Order-No. Length Width x Thickness Euro/Pc.89094015 3 m 15 x 0.15 1,7089094016 5 m 19 x 0.15 3,0089094017 8 m 25 x 0.15 4,5089094018 10 m 25 x 0.15 5,50

Typ B = 1/2 mm/mm: upper edge 1/2 mm , lower edge 1/1 mm graduation

Order-No. Range Euro/Pc.87074080 150 mm 0,8087074081 200 mm 1,0087074082 300 mm 1,3087074085 500 mm 1,80

Order-No.: 86070022Order-No.: 86070022

30,-30,- Euro

TPTTEEHHNNAA PPLLUUSS

dd..oo..oo..trgovsko in proizvodno podjetjePPTT

EE--mmaaiill:: iinnffoo@@tteehhnnaapplluuss..ccoomm,, SSpplleettnnaa ssttrraann:: wwwwww..tteehhnnaapplluuss..ccoomm

TTeell..:: ++338866 ((00))22//778800 6677 0011,, TTeell..:: ((00))22//778800 6677 0066,, FFaaxx..:: ((00))22//778800 6677 0055

PPEE -- RRooggoozznniišškkaa 1144,, 22225500 PPttuujj ,, SSLLOOVVEENNIIJJAA

Documents

measuring toolsUNIVERSAL BEVEL PROTRACTOR with magnifier • stainless steel, chrome finished • reading 0.05 mm • 1/20 mm + 1/28“ 0 5 • made of alloyed steel • tolerance