Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
5/13
Measure Depth: See the chart on next page to determine if window casing has enough depth for an inside-mount window treatment.
Measure Width: Measure the inside width of window casing from one inside edge to the other at the top. Record measurement.
Measure Height: Measure the inside height from the top of window casing to top of sill (or to the floor for patio doors) in three places. Record shortest measurement.
Note: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.
Measure Width: Measure width to be covered. We recommend 3" overlap on each side (6" total) for optimum light control and privacy. Record measurement. If you want the entire window uncovered when the shade is fully open, see information on bottom of page 2.
Measure Height: Measure height to be covered from top of molding to bottom or top of sill if there is one. Record measurement. Allow 3" for adequate mounting area above the window. If shade extends to the floor (i.e. to cover a patio door), measure height in three places. Take smallest measurement and deduct ½" for clearance in order for the fabric to clear the floor.
Note: The manufacturer makes NO deductions on outside-mount installation.
Inside Mount Blind
Outside Mount Blind
3"
1
2
1
3
2
Choose a Mount Type: Inside Mount or Outside Mount(See next page if you need help deciding which mount is best for your windows.)
HeightWidth
Width Height
Depth
Inside Mount Window treatments are installed inside the window casing.
Outside Mount Window treatments are installed outside the window casing. Mount directly to wall or molding.
Headrail
Casing
Molding
Headrail
Casing
Molding
Tools and Tips• Steel tape measure — do not use cloth measuring tape
• Pencil
• Measurement Worksheet – see page 3
• Measure each window and identify window locations – size variances are common
• Round measurements to the nearest 1⁄8"
• Clearly record measurements – width vs. height
1/8"1/4"3/8"1/2"5/8"3/4"7/8"
Measuring Guide for Vertical Cellular Shades
5/13
Reason for Choosing Inside Mount
Clean Look•Inside-mount treatments are installed completely inside the window
casing, showcasing attractive window molding.
•Thewindowopeningframesthetreatmentforafinished,cleanappearance.
Allows Sill Space on Deep Windows•Insomedeep-setwindows,thewindowtreatmentcanbeinstalled
to allow plants or other items to be placed in front of the window treatment on the sill.
Limitations of Inside Mount
Light Gaps•Asmalldeductioninthewidthand/orlengthistakenatthe
manufacturer to allow for proper operating clearance. This may cause a small gap on each side of the treatment, affecting the treatment’s ability to darken a room.
Obstructed View•Thestack(compressedportionofthewindowtreatmentwhenfully
opened) will obstruct part of the view from the window. The amount of stack varies by shade size and fabric.
Architectural Obstacles •Obstaclessuchashandlesandcrankscaninterferewiththe
operation of inside-mount treatments.
Reason for Choosing Outside Mount
Improve Privacy and Light Control•Lightgapsonthesideofthewindowtreatmentcanbesubstantially
diminished or eliminated.
Fewer Installation Limitations•Outside-mountwindowtreatmentsareidealforcovering
non-square windows.
•Outside-mountwindowtreatmentscanbeconfiguredsothefabricstack is to the side of the window opening for an unobstructed view when fully opened.
Architectural Obstacles •Outside-mountwindowtreatmentscanclearobstacleslikehandles
and cranks.
Hide Window Trim•Outside-mounttreatmentscaneasilyhideunattractivewindowtrim.
Limitations of Outside Mount
Required Surface Above Window Frame•Outside-mountbracketsrequireatleast2"offlatsurfaceabove
window or on window frame for mounting brackets; Projection brackets can be ordered if needed to clear frame or molding.
Mounting Considerations
Depth Requirements for Inside Mount
Cell SizeHeadrail
Dimensions Minimum Depth Mount Flush with CasingVertical Cellular
Shades 3⁄8" Double Cell 23⁄16" x 21⁄2" 13⁄4" 27⁄8"
Partially recessed headrail in window casing/molding.
Fully recessed headrail in window casing/molding.
* For all inside mount applications —1⁄4" deduction is taken by manufacturer on overall width and 3⁄8" deduction on height.
Stack Width Chart — Vertical Cellular
Shade Stack Width Includes Side Rails
Alabaster*, Camel*, Carbon*, Coconut Shell*, Denim Blue*,
Forget-Me-Not*, French Roast*,Heather*, Iron Gray*, Kraft, Linen*,
Milk Glass*, Pale Lavender*, Putty , Seagrass*, Wolf Gray*
Carbon-Blackout, Clam Shell-Blackout, Cookie-Blackout,Denim Blue-Blackout,
French Roast-Blackout, Ice White-Blackout, Iron Gray-Blackout,
Kraft-Blackout, Seagrass-Blackout, White Birch-Blackout
Adobe, Biscuit, Buttermilk, Cinnamon, Graphite,
Herb Green, Ivory, Light Latte, Oatmeal, Pigeon, Sand White,
Snail, Sunrise, White Swan
Height of Shade 12-7115⁄16" 72-120" 12-7115⁄16" 72-88" 12-7115⁄16" 72-120"
Wid
th o
f S
had
e
12 - 72" 95⁄8" 133⁄8" 95⁄8" 133⁄8" 95⁄8" 133⁄8" 73 - 84" 95⁄8" 133⁄8" 101⁄2" 133⁄8" 95⁄8" 133⁄8" 85 - 96" 95⁄8" 133⁄8" 111⁄2" 133⁄8" 95⁄8" 133⁄8"
97 - 108" 95⁄8" 133⁄8" 121⁄2" 133⁄8" 97⁄8" 133⁄8" 109 - 120" 95⁄8" 133⁄8" 135⁄8" 137⁄8" 105⁄8" 133⁄8" 121 - 132" 103⁄8" 133⁄8" 145⁄8" 147⁄8" 111⁄2" 133⁄8" 133 - 144" 111/4" 133⁄8" 155⁄8" 157⁄8" 121⁄4" 141⁄8"145 - 156" 115⁄8" 141⁄8" 165⁄8" 17" 13" 153⁄8"157 - 168" 121⁄2" 153⁄8" 137⁄8" 161⁄4"169 - 180" 131⁄4" 161⁄4" 145⁄8" 171⁄8"181 - 192" 133⁄4" 171⁄8" 151⁄2" 183⁄8"
* Maximum shade height 92" NOTE: For a clear opening, stack width must be doubled.
Height of shade is indicated across the top and width of shade is indicated on the left side of chart.
5/13
Measuring Worksheet
Window #1
____________________________ (location)
MeasuringFor Inside MountDepth of window casing:____________
Width:_______________________________
Measure height of window in 3 places and circle the shortest height below:
Height #1:_________________________
Height #2:_________________________
Height #3:_________________________
For Outside Mount
Width: ___________________________
Height:___________________________
Window #2
____________________________ (location)
MeasuringFor Inside MountDepth of window casing:____________
Width:_______________________________
Measure height of window in 3 places and circle the shortest height below:
Height #1:_________________________
Height #2:_________________________
Height #3:_________________________
For Outside Mount
Width: ___________________________
Height:___________________________
Window #3
____________________________ (location)
MeasuringFor Inside MountDepth of window casing:____________
Width:_______________________________
Measure height of window in 3 places and circle the shortest height below:
Height #1:_________________________
Height #2:_________________________
Height #3:_________________________
For Outside Mount
Width: ___________________________
Height:___________________________