Upload
others
View
10
Download
1
Embed Size (px)
Citation preview
TM
Since 2004
MECHANICAL ENGINEERING(One Year Program)
ONLINE TEST SERIESGATE 2021
Compete with the best...
www.onlinetestseries.gateacademy.co.inStep to success... GATE ACADEMY
Our procient faculties have done extensive research to prepare and shape these test series.
An opportunity for students to come across their strengths and weaknesses and work on them properly to turn the things around.
Care has been taken to ensure that the quality of questions has the same level of difculty as is there in the GATE.
Highlights (One Year Program) :
GATE 2021 ONLINE TEST SERIESCompete with the best...
• There are 25 topic wise tests, 22 subject wise tests, 10 combined
subjects tests & 10 full length mock tests.
• Exam software will let you feel environment same as GATE.
• Best question bank containing all difculty levels from entire syllabus
for complete preparation.
• This test series gives the exibility to students to appear in the tests
any time & from anywhere based on their convenience and check
their level of preparation.
• The individual results will be available immediately after the test.
• Students can check their relative performance based on different
parameters, such as question wise i.e. for a particular question how
many students were able to correctly solve that question and how
much time they have taken.
• All India Rank and comparison with All India GATE 2021 aspirant
will be available in most comprehensive manner.
• Electronic Gadgets such as virtual keyboard and virtual calculator
available.
GATE ACADEMY GATE ACADEMY GATE ACADEMY TEST SERIES STRUCTURE (ME)TEST SERIES STRUCTURE (ME)TEST SERIES STRUCTURE (ME)
Stage - IIICombined Subject
Tests (10)
Final StageFull Length Mock
Tests (10)
Mock - 5
Mock - 6
Mock - 3
Mock - 4
Mock - 9
Mock - 10
Mock - 7
Mock - 8
Mock - 1
Mock - 2
Core Subjects
Thermodynamics+
HMT
Production+
Industrial
Theory of Machines+
Applied Thermo
Stage - ITopic Wise Tests (25)
Stage - IISubject Wise Tests (22)
Moderate
Advance
Both tests individuallycover entire syllabus ofthe subject but differ in
difculty level.
Test - 2Test - 1
The complete GATE syllabus of each subject is divided in two parts to form Test - 1 and Test - 2, containing easyto moderate level questions covering all important formulae and concepts
Common Subjects
SOM + FM Maths + Aptitude
Difculty level of test 2 will be higher
Intermediate Level Test
Advance Level Test
Get Registered
Advance Level Test
Intermediate Level Test
Advance Level Test
Intermediate Level Test
Advance Level Test
Intermediate Level Test
Advance Level Test
Intermediate Level Test
GATE 2021ONLINE TEST SERIES
Compete with the best...
For Special Discount
ONLY TOPIC WISE TESTOther than Gate Academy Students
ONLY SUBJECT WISE TEST (Full Syllabus)Other than Gate Academy Students
ONLY FULL LENGTH MOCK TESTOther than Gate Academy Students
SUBJECT WISE + TOPIC WISE TESTOther than Gate Academy Students
SUBJECT WISE + FULL LENGTH MOCK TESTOther than Gate Academy Students
400 Rs + GST)
400 Rs + GST
500 Rs + GST
600 Rs + GST
600 Rs + GST
SPECIAL DISCOUNT FOR GATE RANK HOLDERS
GATE AIR upto 1000
GATE AIR 1000 to 2000
GATE AIR 2000 to 3000
GATE AIR 3000 to 4000
GATE AIR 4000 to 5000
300 Rs + GST
400 Rs + GST
500 Rs + GST
600 Rs + GST
100 Rs + GST
COMPLETE TEST PACKAGE
ALL TEST PACKAGE DETAILS (One Year Program)
Gate Academy Students
Other than Gate Academy Students
Ex. Gate Academy Students
400 Rs + GST
900 Rs + GST �ll 30 June1000 Rs + GST a�er 30 June
600 Rs + GST
COMPLETE TEST PACKAGE
Send your GATE Score Card (2020) on [email protected] shall get coupon code regarding same within 24 Hrs.
Test Name Description
Topic Wise Tests Total 20 tests
Subject Wise Tests (Basic Level) Total 10 tests
Multiple Subjects Tests Total 10 tests
Full Length Mock GATE Total 10 tests
Subject Wise Test (Advance Level) Total 10 tests
Star�ng from 15 April 2020
Star�ng from 1 May 2020
Star�ng from 15 June 2020
Star�ng from 30May 2020
Star�ng from 15 May 2020
BRANCH : MECHANICAL ENGINEERING (One Year Program)
Online Test Series Schedule for GATE 2021
Online Test Series Schedule for GATE 2021BRANCH : MECHANICAL ENGINEERING
Topic-wise Tests (One Year Program)(Each test carries 25 marks and 45 minutes duration.
Test consists of 5 one mark questions and 10 two marks questions)
Test 1
Test 2
Topic
Strength of
Materials
Stress And Strain, Stress-stress Rela�onship And Elas�c Constants,
Shear Force And Bending Moment Diagrams, Thermal Stresses,
Mohr's Circle For Plane Stress And Plane Strain, Thin Cylinders
Subject Date (Available From)
15 April 2020
Total
67 Tests
Deflec�on of beams; torsion of circular sha�s; Euler's theory of
columns; strain energy methods; strain gauges and rose�es;
tes�ng of materials with universal tes�ng machine; tes�ng of
hardness and impact strength.
Topic
FluidMechanics
Fluid properties; fluid statics, manometry, buoyancy; forces on submerged bodies; stability of floating bodies; fluid acceleration; differential equations of continuity; Control-volume analysis of mass, momentum and energy,
Subject Date (Available from)
Fluid Dynamics , Laminar Flow & Turbulent Flow , Flow through pipes , Boundary layer, Dimensional Analysis
Test 1
Test 2
15 April 2020
Topic
IndustrialEngineering
Production Planning and Control: Break- even analysis, Forecasting models, Scheduling / Sequencing, Material Requirement Planning (MRP), Line balancing.Inventory control : Deterministic and Probabilistic models, Safety stock inventory control systems.
Subject Date (Available from)
Test 1
Test 2
15 April 2020Operation Research: Linear programming problem (Graphical and Simplex method), Transportation problem, Assignment problem,Queuing theory.CPM : Project network, Project completion time, Types of float, Crashing.PERT : Mean project completion time, Standard deviation and Variance
Topic
EngineeringMechanics
Free-body diagrams and equilibrium; trusses and frames; virtual work; friction, Moment of inertia
Subject Date (Available from)
Test 1
Test 2
15 April 2020kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.
Topic
Theory ofMachine
Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; gears trains; flywheels and governors.
Subject Date (Available from)
Test 1
Test 2
15 April 2020Cams; Free and forced vibration of single degree of freedom systems; effect of damping, vibration isolation; resonance; critical speeds of shafts. balancing of reciprocating and rotating masses; gyroscope.
Topic
EngineeringMathematics
Linear Algebra, Differen�al Equa�on, Limits and Series expansion, Probability, Numerical methods, Vector Calculus
Subject Date (Available from)
Test 1
Test 215 April 2020Differen�al Calculus, Integral Calculus, Mean Value
Theorem, Complex Variable, Maxima and Minima
Topic
ManufacturingEngineering
Material science: Structure of material ( SCC, BCC, FCC, HCP), Unit cell parameter (APF, Coordination number, Number of atoms per unit cell), Imperfection or Defects (Point, line, surface), Iron-carbon equilibrium diagram, TTT diagram, Heat treatment processes (Hardening, Annealing, Normalizing, Tempering).Casting: Pattern size, Allowances (Shrinkage, Machining, Draft, Shake/ Rapping, Distortion/ Bending allownces ), Permeability number, Core making, Gating ratio, Pouring or Filling time, Aspiration effect, Solidification time, Riser design (Freezing ratio, Shape factor), Miscellaneous casting processes (Slush casting, Investment casting, Centrifugal casting etc), Casting defects.Welding: Gas welding, Arc welding (TIG, MIG, SAW, Arc - Voltage characteristic and Linear- Power source characteristic), Friction welding, Thermit welding, Resistance welding,Soldering,Brazing and Braze welding, Welding defects.
Subject Date (Available from)
Test 1
Test 2
15 April 2020Metal forming processes: Rolling ,Drawing, Extrusion, Forging.Sheet metal operation: Punching, Blanking, Deep drawing, Bending.Metal cutting and machining: Tool geometry and Tool designation, Merchant circle diagram, Taylor's tool life equation, Economics of machining, Shaping, Planning, Turning, Boring, Drilling, Milling, Grinding.Non-conventional machining: AJM, USM, ECM, EDM, EBM, LBM.Principle of Powder metallurgy: Sintering, Infiltration, Impregnation.
Metrology and inspection: Linear and Angular measurements, Limits, Fits and Tolerances, Hole base and Shaft base system, Fundamental deviation, Standard tolerance unit, Limit gauge (Plug and Ring gauge, GO size and NO-GO size).Advance machining method: Basic concepts of NC and CNC , Basic length unit (BLU) , Part programming of CNC (G-code and M-code).Gear manufacturing processes: Gear forming, Gear generation (Gear shapping, Gear hobbing )
Test 3
Topic
GeneralAptitude
Quantitative Aptitude
Subject Date (Available from)
Test 1
Test 215 April 2020
Verbal Aptitude
Subjects Date (Available from)
Topic-wise Tests (One Year Program)(Each test carries 30 marks and 60 minutes dura�on.
Test consists of 10 one mark ques�ons and 10 two marks ques�ons)
No. of Tests
02
02
02
02
02
02
02
03
02
02
02
02
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 15 April 2020
Star�ng from 18 April 2020
Star�ng from 18 April 2020
Star�ng from 18 April 2020
Star�ng from 18 April 2020
Test 1
Test 2
Topic
Heat
Transfer
Modes Of Heat Transfer; One Dimensional Heat Conduc�on,
Resistance Concept, Electrical Analogy, Unsteady Heat Conduc�on,
Lumped Parameter System, Heisler's Charts, Heat Transfer Through
Extended Surfaces.
Subject Date (Available From)
18 April 2020Thermal Boundary Layer, Dimensionless Parameters In Free And
Forced Convec�ve Heat Transfer, Heat Transfer Correla�ons For
Flow Over Flat Plates And Through Pipes, Effect Of Turbulence,
Heat Exchanger Performance, LMTD And NTU Methods, Radia�ve
Heat Transfer, Stefan-boltzmann Law Wien's Displacement Law,
Black And Grey Surfaces, View Factors, Radia�on Network
Analysis.
Design for static and dynamic loading; failure theories; fatigue
strength and the S-N diagram; principles of the design of machine
elements such as bolted, riveted and welded joints
Spur gears, rolling and sliding contact bearings, brakes, clutches and springs.
Test 1
Test 2
Topic
Machine
Design
Subject Date (Available From)
18 April 2020
Topic
BasicThermo-dynamics
Thermodynamic systems and processes; Zeroth and first law of thermodynamics, calculation of work and heat in various processes.
Subject Date (Available from)
Second law of thermodynamics, Entropy, Thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations, Properties of Pure Substances, Behavior of Ideal and Real Gases.
Test 1
Test 218 April 2020
Topic
AppliedThermo-dynamics
Power Engineering: Air and gas compressors, vapour and gas power cycles, concepts of regeneration and reheat, I.C. Engines; Air-standard Otto, Diesel and dual cycles, Fuel and Combustion.
Subject Date (Available from)
Refrigeration and air conditioning : Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes.
Test 1
Test 2
18 April 2020
Strength of Materials
Fluid Mechanics & Hydraulic machines
Industrial Engineering
Engineering Mechanics
Theory of Machine
Engineering Mathematics
General Aptitude
Manufacturing Engineering
Heat-Transfer
Machine Design
Basic Thermodynamics
Applied Thermodynamics
Subjects Date (Available from)
Basic Subject-wise Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.
Test consists of 10 one mark ques�ons and 20 two marks ques�ons)
No. of Tests
01
01
01
01
01
01
01
01
01
01
01
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Star�ng from 1 May 2020
Advance Subject-wise Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.
Test consists of 10 one mark ques�ons and 20 two marks ques�ons)
Subjects Date (Available from)No. of Tests
01
01
01
01
01
01
01
01
01
01
01
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Star�ng from 15 May 2020
Moderate Level 1Advance Level 1
Moderate Level 1Advance Level 1
Moderate Level 1Advance Level 1
Moderate Level 1Advance Level 1
Moderate Level 1Advance Level 1
Combined Subject Tests (One Year Program)(Each test carries 50 marks and 90 minutes dura�on.
Test consists of 10 one mark ques�ons and 20 two marks ques�ons)
Subjects Date (Available from)
SOM + FM
MAThs + Ap�tude
Thermodynamics + HMT
Produc�on + Industrial
Theory of Machines + Applied Thermo
No. of Tests
Star�ng from 30 May 2020
Star�ng from 30 May 2020
Star�ng from 30 May 2020
Star�ng from 30 May 2020
Star�ng from 30 May 2020
General Aptitude + General English
Engineering Mathematics
Strength of Materials
Engineering Mechanics
Machine Design
Fluid Mechanics & Hydraulic machines
Heat-Transfer
Thermodynamics & Its Application
Production Engineering
Industrial Engineering
Theory of Machine
General Aptitude + General English
Engineering Mathematics
Strength of Materials
Engineering Mechanics
Machine Design
Fluid Mechanics & Hydraulic machines
Heat-Transfer
Thermodynamics & Its Application
Production Engineering
Industrial Engineering
Theory of Machine
HEAD OFFICE : A / 114-115, SMRITI NAGAR, BHILAI - 490 020 (C.G.)Contact : 97131-13156, 62662-02387, 0788-4034176
E-mail : [email protected]
SINCE 2004
GATE ACADEMYGATE ACADEMY
Step - I Step - II
Visit
h�p://onlinetestseries.gateacademy.co.in
Click on New Registra�on
Fill the Form, You will be Redirected to the Test Portal
Click on buy Package Make Payment using Coupon code
(For gate academy student) or by online payment.
Send completely filled
registra�on form to our office
(for gate academy student)
Finally... How to get registered for Test Series ?
Note : Students have to Upload their GATE Admit Card for Accessing Full Mock Test.Tests will be accessible �ll one week a�er GATE 2021 Examina�on
Subjects Date (Available from)
Full Length Mock GATE (Tenta�ve Schedule for One Year Program)(Each test carries 100 marks and 3 hours dura�on as per GATE Pa�ern)
Full Length Mock - 1
Full Length Mock - 2
Full Length Mock - 3
Full Length Mock - 4
Full Length Mock - 5
Full Length Mock - 6
Full Length Mock - 7
Full Length Mock - 8
Full Length Mock - 9
Full Length Mock - 10
Star�ng from 15 June 2020
Star�ng from 15 June 2020
Star�ng from 15 June 2020
Star�ng from 15 June 2020
Star�ng from 15 June 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
*Information about launching of 2 Years Test Series Program will be available soon