MDOT Design-Build Project Book 3 – Grosse Ile Bridge

MDOT Design-Build Project Book 3 – Grosse Ile Bridge FoundationsJN: 203623

RFP iBook 3

APPLICABLE STANDARDSBOOK 3

MICHIGAN DEPARTMENT OF TRANSPORTATIONDesign-Build Project

GROSSE ILE BRIDGEPHASE I PROJECT

Job Number: 203623Federal Project Number: 1801105

Request For Proposal May 10, 2019Original Issue


RFP iiBook 3

TABLE OF CONTENTS1 INTRODUCTION ............................................................................................................................................. 1

1.1 MDOT AND OTHER REFERENCES ............................................................................................................. 11.2 MDOT WEB SITE ..................................................................................................................................... 11.3 MDOT MANUALS .................................................................................................................................... 11.4 ROAD DESIGN MANUAL ........................................................................................................................... 11.5 OTHER DESIGN CRITERIA ......................................................................................................................... 11.6 WEB SITES ............................................................................................................................................... 11.7 GENERAL MODIFICATIONS........................................................................................................................ 11.7.1 General ................................................................................................................................................... 21.7.2 Quantities and Payment ........................................................................................................................... 21.7.3 Roles and Responsibilities........................................................................................................................ 2

2 LIST OF STANDARDS..................................................................................................................................... 4


RFP 1Book 3

1 INTRODUCTIONThis is a listing of standards that the Design-Builder shall utilize in performing the final design andconstruction of the Project described in the RFP. It shall be the Design-Builder’s responsibility to ensure thatthe most current version as of RFP release date is used for each of the references listed. See each section forspecific requirements from the references, as well as the hierarchy of the references for that section.

1.1 MDOT and Other ReferencesAll Project design and construction shall be performed in accordance with the requirements of this RFP andthe Michigan Department of Transportation (MDOT) Standard Specifications for Construction, (StandardSpecifications), as well as the other special provisions, manuals, technical memoranda, standards, andguidelines listed in the Contract Documents. The criteria listed within the Standard Specifications and theMDOT engineering manuals and other references are considered minimums in terms of the required qualityof Project workmanship and design. Where MDOT has not included a special provision applicable to theDesign-Builder’s Work, or where the Design-Builder proposes additional or different special provisions,these special provisions shall be subject to the Approval of MDOT. If it is not clear to the Design-Builderhow the special provisions, manuals, technical memoranda, standards, or guidelines should be interpreted,the Design-Builder shall have the obligation to raise the issue with MDOT. Regardless of whether theDesign-Builder raises the issue, MDOT shall always have the right to notify the Design-Builder if theDesign-Builder is interpreting the modification incorrectly.

1.2 MDOT Web SiteOrdering information for most MDOT references, including specifications, plans, and details, is on MDOT’sWeb site: http://www.michigan.gov/mdot/

1.3 MDOT ManualsWhen an RFP document or manual refers to other MDOT manuals, the applicable MDOT version in effect atthe time of the RFP Release Date shall be used.

1.4 Road Design ManualSpecifically, the roadway geometric design shall be in accordance with the MDOT Road Design Manual

(English), which specifies MDOT’s new Construction/Reconstruction Standards. These standards shall beused for each of the design elements described in this RFP, unless otherwise noted.

1.5 Other Design CriteriaUnless otherwise specified in this RFP, the Project design shall be governed by MDOT policies,specifications, standards, manuals, guidelines, and technical memoranda, including all addenda, supplements,and revisions thereto. Generally, the design shall comply with the criteria established by MDOT andAASHTO. The latest version (current version as of the RFP Release Date) of these references shall be usedunless otherwise specified.

1.6 Web SitesWeb sites have been supplied to the Design-Builder for some of the standards listed below for convenienceonly in an effort to help the Design-Builder locate the required standard. The Web sites are not guaranteed tobe correct. It is ultimately the Design-Builder’s responsibility to locate the required standard and todetermine if the standard has been modified pursuant to this RFP.

1.7 General ModificationsThe following modifications shall apply to applicable standards listed in Book 3.


RFP 2Book 3

1.7.1 General1. All references to standards, codes, or criteria, or to the latest version of other standards, codes, or criteria

in Book 2 of the Contract Documents shall mean the latest version as of RFP release date.

2. Certain MDOT standards have been written as guidance documents and not as mandatory requirements.For purposes of this Project, the Design-Builder shall assume that all provisions of MDOT standards,including figures and tables, are mandatory, and guidelines shall be assumed to be requirements. Allwords such as “should,” “may,” “could,” and “can” shall mean “shall” unless the context requiresotherwise, as determined in the sole discretion of MDOT. The Design-Builder shall disregard qualifyingwords such as “usually,” “normally,” and “generally.” In addition, references to MDOT’s preferredpractices and policies, including those using phrases such as “should be considered”, shall be construedto be mandatory requirements unless the context requires otherwise, as determined in the sole discretionof MDOT. It shall be in MDOT’s sole discretion to determine when the context does not require aprovision to be mandatory.

3. When a standard refers to an action being necessary, needed, or recommended, the Design-Builder shallconstrue the action as required unless the context requires otherwise, as determined in the sole discretionof MDOT.

4. Some standards may provide general information (e.g., descriptions of MDOT divisions and their duties,descriptions of legal authority, or descriptions of internal MDOT procedures) that does not apply todesign-build contracts; however, in some cases it may not be clear whether rights or responsibilities areapplicable to the Design-Builder. If it is unclear whether specific provisions in the standard areapplicable to the Design-Builder, the Design-Builder shall raise the issue with MDOT and MDOT shallmake that determination in its sole discretion.

5. If the Design-Builder believes that an item in the standards is unclear, the Design-Builder shall have theobligation to raise the issue with MDOT. Regardless of whether the Design-Builder raises the issue,MDOT shall always have the right to notify the Design-Builder if the Design-Builder is interpreting themodification incorrectly.

1.7.2 Quantities and Payment1. All references related to pay items or quantities, measurement for payment, method of measurement,

basis of payment, extra work, adjustment of unit prices, or similar phrases shall be disregarded by theDesign-Builder, except guidance or information on disincentives for Nonconforming Work shall beeither the specific dollar amount or percent set forth in the Standards or a unit price proposed by theDesign-Builder and Approved by MDOT.

2. When a standard refers to “extra work,” “compensation for,” “at the Department’s expense,” “quantityadjustments,” “equivalent quantities,” or similar phrases, such references shall be disregarded. It is theintent that the payment of the Contract Price will be full compensation for all Work performed pursuantto the Design-Build Contract unless specific provisions for additional payments are contained in Book 1or Book 2 of the Contract Documents.

1.7.3 Roles and Responsibilities1. When a standard refers to “Engineer” relating to design responsibilities, such references shall mean the

Design-Builder’s Engineer, unless otherwise specified. It shall be in MDOT’s sole discretion todetermine when the context refers to design responsibilities.

2. When a standard uses the term “Engineer” relating to construction inspection, materials testing, disposal,restoration, extension of time, testing frequency, testing results and suitable method, such term shallmean MDOT. It shall be in MDOT’s sole discretion to determine when the context refers to theseapplications.


RFP 3Book 3

3. When a standard uses the term “Engineer” relating to activation or de-activation of railroad or highwaysignals, approval of any activities involving the use of explosives, such term shall mean MDOT.

4. When an approval or authorization of the Engineer or MDOT is required in a standard for the use ofalternative or substituted processes or components, the Engineer shall mean MDOT.

5. When a standard requires actions, dimensions, spacing, design information, materials as designed,means, or methods that are “either as indicated in the Plans or as designated by the Engineer,” theDesign-Builder shall disregard the phrase “or as designated by the Engineer.”

6. When a standard refers to the “Engineer” ordering work beyond the scope of work in the Contract,“Engineer” shall mean MDOT. Whenever the Engineer may order work that results in additional costs toMDOT, the “Engineer” shall mean MDOT.

7. Wherever references to “Engineer” result in testing or acceptance procedures being assigned to theEngineer, acceptance will be on behalf of MDOT. MDOT reserves the right to perform additional testsand inspections as necessary to confirm that the work is in conformance with Contract requirements andwill be the only party authorized to Accept or Approve the Work on behalf of the State.

8. When a standard refers to unauthorized work or to acceptance of non-conforming work by the“Engineer,” the Engineer shall mean MDOT.

9. When a standard refers to “Department,” “MDOT,” or specific job titles within MDOT, such referenceshall mean MDOT.

10. Any acceptances on behalf of MDOT, Department or the State shall be performed by MDOT.

11. Any references in a standard to the Engineer that refer to the time period after Final Acceptance shallmean MDOT.

12. When a standard requires notifications to the Engineer, the Engineer shall mean MDOT.

13. When a standard refers to an approval of any correction or repair that deviates from the Contractrequirements, the approval must be by MDOT.

14. When a standard refers to items that will be performed or provided by MDOT or by a division oremployee of MDOT, the Design-Builder shall construe the requirements as applying to the Design-Builder unless otherwise specified in the Contract Documents, or unless the context requires otherwise. Itshall be in MDOT’s sole discretion to determine when the context requires otherwise.

15. When a standard refers the Project Manager as it relates to plan processes, sending information orrequesting information from internal MDOT entities, the term “Project Manager” does not mean theDesign-Builder. The Design-Builder shall submit all requests directly to the MDOT Project Manager ortheir designee on the Project.

16. When a standard refers to contractor, such reference shall mean Design-Builder.


RFP 4Book 3

2 LIST OF STANDARDSMDOT Special Provisions cited in the Contract Documents are included in Exhibit 3-1-A.

Specific References Cited for the RFP:

Availability Legend:

IS = Industry standard, Design-Builder’s responsibility to acquire.

W = Standard is available as a download on the organization’s Web site, Design-Builder’s responsibility toacquire.

E = Document to be given to Design-Builder in electronic format.

Organization Standard Availability

AASHTO Accommodation of Utilities Within Freeway Right-of Way IS

AASHTO A Guide for Accommodating Utilities Within Highway Right-ofWay, 4th Edition IS

AASHTO A Guide for Transportation Landscape and Environmental Design,2nd Edition, 1991 IS

AASHTO A Guide for Achieving Flexibility in Highway Design, 1st Edition IS

AASHTO A Policy on Geometric Design of Highways and Streets, 6th Edition,2011 IS

AASHTO A Policy on Design Standards - Interstate System, 2016 IS

AASHTO Roadway Lighting Design Guide, 2005 IS

AASHTO Construction Handbook for Bridge Temporary Works, 1st Edition,1995 with (2008) Current Interims IS

AASHTO Guide Design Specifications for Bridge Temporary Works, 1stEdition, 1995 with (2008) Current Interims IS

AASHTO Guide for Design of Pavement Structures, 1993 IS

AASHTO Guide for Park-and-Ride Facilities, 2nd Edition IS

AASHTO Guide for the Development of Bicycle Facilities, 4th Edition, 2012 IS

AASHTO Guide for the Planning, Design, and Operation of PedestrianFacilities July 2004 or newer IS

AASHTOLRFD Movable Highway Bridge Design Specifications, 2nd Edition,2007, including 2008, 2010, 2011, 2012, 2014, and 2015 InterimRevisions

IS

AASHTO Guide Specifications for Horizontally Curved Steel Girder HighwayBridges, 2003 and Errata IS

AASHTO LRFD Bridge Construction Specifications, 4th Edition, 2017 IS


RFP 5Book 3


AASHTO LRFD Bridge Design Specifications, 8th Edition, 2017 IS

AASHTO LRFD Guide Specifications for the Design of Pedestrian Bridges,2nd Edition, 2009 with 2015 Interim Revisions IS

AASHTO Manual on Subsurface Investigation, 1st Edition, 1988 IS

AASHTO Manual for Bridge Evaluation, 2nd Edition, 2011 with 2011, 2013,2014, and 2015 Interim Revisions IS

AASHTO Provisional Standards, 2014 Edition IS

AASHTO Roadside Design Guide, 3rd Edition, with 2006 Chapter 6 Update IS

AASHTOStandard Specifications for Transportation Materials and Methodsof Sampling and Testing, and AASHTO Provisional Standards,2017

IS

AASHTO Standard Specifications for Highway Bridges, 17th Edition withCurrent Interims IS

AASHTOStandard Specifications for Structural Supports for Highway Signs,Luminaires and Traffic Signals, 6th Edition, 2013, including 2015Interim Revisions

IS

AASHTOLRFD Specifications for Structural Supports for Highway Signs,Luminaires, and Traffic Signals, 1st Edition, 2015, with 2017 and2018 Interim Revisions

IS

AASHTO Steel Bridge Erection Guide Specification IS

AASHTO AASHTO/AWS D1.5M/D1.5:2015 Bridge Welding Code, 7th

Edition, 2016, including 2018 Interim Revisions IS

AASHTO/NSBASteel BridgeCollaboration

Guide Specification for Application of Coating Systems with Zinc-Rich Primers to Steel Bridges, S 8.1-2006

http://www.aisc.org/WorkArea/showcontent.aspx?id=20128W


Shop Detail Drawing Review/Approval Guidelines, G 1.1-2000



Shop Detail Drawing Presentation Guidelines G 1.3-2002



Steel Bridge Bearing Design and Detailing Guidelines, G 9.1-2004

www.aisc.org/WorkArea/linkit.aspx?LinkIdentifier=id&ItemID=20118

W


RFP 6Book 3



S2.1 Steel Bridge Fabrication Guide Specifications, 2nd Edition

www.aisc.org/assets/0/1209478/1209480/dd9428d4-8755-4454-a377-7b3c17cff2dc.pdf

W


Steel Bridge Fabrication QC/QA Guide Specification, S 4.1-2002


ACI 318-08: Building Code Requirements for Structural Concrete andCommentary IS

ADA

Americans with Disabilities Act Accessibility Guidelines for Streetsand Sidewalks

https://www.access-board.gov/guidelines-and-standards/streets-sidewalks

W

AluminumAssociation forAlloy

Number 319.0 IS

American Congresson Surveying andMapping and theAmerican Society ofCivil Engineers

Definitions of Surveying and Associated Terms IS

ANSI B2.1 IS

ANSI American Standard for Nursery Stock, ANSI Z60.1-2014 IS

AREMA Manual for Railway Engineering, Current Year IS

ASCE Practical Highway Esthetics IS

ASTM Standards IS

ATSSA Quality Guidelines for Temporary Traffic Control Devices andFeatures IS

AWWA Standards IS

Telcordia Document No. GR-326, Issue 4, Generic Requirements for Single-Mode Optical Fiber Connectors and Jumper Assemblies IS

Code of FederalRegulations

Title 23 (Highways), Chapter 1, Subchapter H, Part 752 Landscapeand Roadside Development

http://www.ecfr.gov/cgi-bin/retrieveECFR?gp=&SID=ff29552a627c875842d38eeefbf2b2a6&r=PART&n=23y1.0.1.8.42

W


RFP 7Book 3


CTS

Context Sensitive Design, THE ROAD BEST TRAVELLED,Executive Summary

http://www.contextsensitive.umn.edu/workshops/pilot/documents/CSDsummary.pdf

W

EIA/TIACollaboration TIA/EIA-455-171-A-2001 FOTP-171 IS

EIA/TIACollaboration TIA/EIA – 455-203 Fiber Optic Test Procedure (FOTP) Standards IS

ElectronicsIndustries Alliance(EIA)

Standards IS

FHWA

Corrosion /Degradation of Soil Reinforcements for MechanicallyStabilized Earth Walls and Reinforced Soil Slopes, (FHWA-NHI-09-087), November 2009

http://www.fhwa.dot.gov/engineering/geotech/pubs/nhi09087/nhi09087.pdf

W

FHWA

Design and Construction of Driven Pile Foundations, Volumes 1and 2, (FHWA-HI-97-013 and FHWA-HI-97-014)

http://www.fhwa.dot.gov/engineering/geotech/library_arc.cfm?pub_number=42

W

FHWA

Drilled Shafts: Construction Procedures and LRFD DesignMethods, (FHWA-NHI-10-016), May 2010 and Errata

http://www.fhwa.dot.gov/engineering/geotech/foundations/nhi10016/nhi10016.pdf

W

FHWAFlexibility in Highway Design, (FHWA-PD-97-062)

http://www.fhwa.dot.gov/environment/flex/W

FHWAGeotechnical Engineering Circular Number 4, Ground Anchors andAnchored Systems, (FHWA-IF-99-015), June 1999

http://www.fhwa.dot.gov/engineering/geotech/pubs/if99015.pdfW

FHWA Handbook on Design and Construction of Drilled Shafts underLateral Load, (FHWA-IP-84-11) IS

FHWA

Highway Traffic Noise Analysis and Abatement, Policy andGuidance, December 2011

https://www.fhwa.dot.gov/environMent/noise/regulations_and_guidance/analysis_and_abatement_guidance/

W


RFP 8Book 3


FHWAHydraulic Design Series Number 7, Hydraulic Design of SafeBridges, (FHWA-HIF-12-018), April 2012

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/hif12018.pdfW

FHWAHydraulic Design Series Number 3, Design Charts for Open-Channel Flow, (FHWA-EPD-86-102), August 1961

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/hds3.pdfW

FHWA

Hydraulic Design Series Number 5, Hydraulic Design of HighwayCulverts, Third Edition (FHWA-HIF-12-026), April 2012

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/12026/hif12026.pdf

W

FHWA

Hydraulic Engineering Circular Number 14 (HEC-14), HydraulicDesign of Energy Dissipators for Culverts and Channels, (FHWA-NHI-06-086), July 2006

https://www.fhwa.dot.gov/engineering/hydraulics/pubs/06086/hec14.pdf

W

FHWAHydraulic Engineering Circular Number 18 (HEC-18), EvaluatingScour at Bridges, (FHWA-HIF-12-003), April 2012

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/hif12003.pdfW

FHWA

Hydraulic Engineering Circular Number 21 (HEC-21), Design ofBridge Deck Drainage, (FHWA-SA-92-010), May 1993

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/hec/hec21.pdf

W

FHWA

Hydraulic Engineering Circular Number 22 (HEC-22), UrbanDrainage Design Manual, Third Edition (FHWA-NHI-10-009),September 2009 (Revised August 2013)

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/10009/10009.pdf

W

FHWA

Hydraulic Engineering Circular Number 23 (HEC-23), BridgeScour and Stream Instability Countermeasures - Experience,Selection and Design Guidance, Third Edition, Volumes 1 and 2(FHWA-NHI-009-111/112), September 2009

http://www.fhwa.dot.gov/engineering/hydraulics/pubs/09111/09111.pdf

W

FHWAManual for Design & Construction Monitoring of Soil Nail Walls,(FHWA-SA-96-069R), October 1998

http://isddc.dot.gov/OLPFiles/FHWA/010571.pdfW


RFP 9Book 3


FHWA

Mechanically Stabilized Earth Walls and Reinforced Soil SlopesDesign & Construction Guidelines, (FHWA-NHI-00-043), March2001

http://isddc.dot.gov/OLPFiles/FHWA/010567.pdf

W

FHWA Micropile Design and Construction Reference Manual IS

FHWAProgram Guide: Utility Relocation and Accommodation on Federal-Aid Highway Projects, 6th Edition, January 2003

http://www.fhwa.dot.gov/reports/utilguid/if03014.pdfW

FHWA

Public Involvement Techniques for Transportation Decision-Making

http://www.fhwa.dot.gov/planning/public_involvement/publications/techniques/fhwapd96031.pdf

W

FHWASoils and Foundations Reference Manual – Volumes I and II

https://www.nhi.fhwa.dot.gov/training/nhistoresearchresults.aspx?topicnum=132

W

FHWA The Cone Penetration Test IS

FHWA The Pressuremeter Test for Highway Applications IS

FHWASubsurface Investigations – Geotechnical Site Characterization,(FHWA-NHI-01-031), May 2002

http://isddc.dot.gov/OLPFiles/FHWA/012546.pdfW

Great Lakes –UpperMississippi RiverBoard (GLUMRB)

Ten States Standards for Water Works

http://10statesstandards.com/W

Great Lakes –UpperMississippi RiverBoard (GLUMRB)

Ten States Standards for Wastewater Facilities

http://10statesstandards.com/W

Institute ofElectrical andElectronicEngineers (IEEE)

National Electrical Safety Code IS

IlluminatingEngineering Societyof North America

Roadway Lighting ANSI Approved IS

Institute ofTransportationEngineers (ITE)

Standards IS


RFP 10Book 3


International CodeCouncil (ICC) International Building Code IS

InternationalMunicipal SignalAssociation

Specification No. 50-2 IS

InternationalSociety ofArboriculture (ISA)

Guide for Plant Appraisal, 9th Edition IS

ISO ISO 9001, 1994 Revision IS

MDEQA Guide to the Control and Management of Invasive Phragmites

http://www.michigan.gov/documents/deq/deq-ogl-ais-guide-PhragBook-Email_212418_7.pdf

W

MDEQComputing Flood Discharges for Small Ungaged Watersheds

http://www.michigan.gov/documents/deq/lwm-scs_198408_7.pdfW

MDEQ

Geological Survey Division Stratigraphic Lexicon for Michigan2001

http://www.michigan.gov/documents/deq/GIMDL-BU08_216121_7.pdf

W

MDOTAdministrative Rules regulating Driveways, Banners and Parades

http://www.michigan.gov/documents/mdot/Admin_Rules_booklet_186108_7.pdf

W

MDOTBridge Analysis Guide

http://www.michigan.gov/mdot/0,4616,7-151-9625_70811_70813-132786--,00.html

W

MDOTBridge Design Guides

http://mdotcf.state.mi.us/public/design/englishbridgeguides/W

MDOTBridge Design Manual

http://mdotcf.state.mi.us/public/design/englishbridgemanual/W

MDOTBureau of Highways Instructional Memos

http://www.michigan.gov/mdot/0,1607,7-151-9622_11044_20469---,00.html

W

MDOTCAD Standards

http://www.michigan.gov/mdot/0,1607,7-151-9625_21540_36037_54428---,00.html

W


RFP 11Book 3


MDOTCertified Payrolls Status Record

http://www.michigan.gov/documents/mdot/MDOT_Certified_Payrolls_300657_7.pdf

W

MDOTConstruction Advisories


W

MDOTConstruction Site Soil Erosion & Pollution Prevention Pocket Guide

http://www.michigan.gov/documents/stormwatermgt/2007_SESC_Pocket_Flip_Guide_192393_7.pdf

W

MDOTConstruction & Technology Research Reports


W

MDOTContext Sensitive Solutions Information

http://www.michigan.gov/mdot/0,1607,7-151-9621_41446-143910--,00.html

W

MDOTC&T Research Records and MATES


W

MDOTDensity Testing and Inspection Manual

http://www.michigan.gov/documents/mdot/MDOT_DensityTestingAndInspectionManual_322964_7.pdf

W

MDOTDesign Survey Manual

http://mdotcf.state.mi.us/public/design/surveymanual/W

MDOTDevelopment Guide Wiki

http://mdotwiki.state.mi.us/design/index.php/Main_PageW

MDOTDrainage Manual

http://www.michigan.gov/stormwatermgt/0,1607,7-205--93193--,00.html

W

MDOT

Frequently Used Special Provisions

http://mdotcf.state.mi.us/public/dessssp/spss/gotoview.cfm?ds=27The following Frequently Used Special Provisions shall be excludedfrom the project 12SP-501D, 12SP-501U, 12SP-501W, and 12SP-501Y

W


RFP 12Book 3


MDOTGeometric Design Guides

http://mdotcf.state.mi.us/public/tands/plans.cfmW

MDOTGeotechnical Manual, December 2018

https://www.michigan.gov/documents/mdot/MDOT_Geotechnical_Manual_642589_7.pdf

W

MDOTGuidelines for Plan Preparation, Road Sample Plans

http://mdotwiki.state.mi.us/design/index.php/Chapter_7_-_Plan_and_Proposal_Preparation#7.3_Sample_Plans

W

MDOTGuidelines for Plan Preparation, Bridge Sample Plans

http://mdotwiki.state.mi.us/design/index.php/Chapter_7_-_Plan_and_Proposal_Preparation#7.3_Sample_Plans

W

MDOTGuidelines for Stakeholder Engagement

http://www.michigan.gov/documents/mdot/MDOT_Guidelines_For_Stakeholder_Engagement_264850_7.pdf

W

MDOTHMA Production Manual

http://www.michigan.gov/documents/mdot_HMA_ProductionManual_79005_7.pdf

W

MDOTITS Standard Details


W

MDOTMaintaining Traffic Typicals


MDOTMaintenance Work Zone Traffic Control Guidelines

http://www.michigan.gov/documents/zonecontrol_112912_7.pdfW

MDOTManual for the Michigan Test Methods (MTM'S)

http://www.michigan.gov/documents/mdot_MTM_CombinedManual_83501_7.pdf

W

MDOTMaterials Quality Assurance Procedures Manual


W

MDOTMaterials Source Guide

http://www.michigan.gov/documents/mdot/MDOT-MaterialSourceGuideComplete_Linked_181739_7.pdf

W


RFP 13Book 3


MDOT

MDOT

Uniform Field Soil Classification System (Modified UnifiedDescription)

http://www.michigan.gov/documents/mdot/MDOT_SoilClassification_189904_7.pdf

W

MDOTMichigan Manual of Uniform Traffic Control Devices (MMUTCD)


MDOTPavement Design and Selection Manual

http://www.michigan.gov/documents/mdot/MDOT_Pavement_Design_and_Selection_Manual_257723_7.pdf

W

MDOTPavement Marking Standards and Special Details


MDOTPercent Within Limits (PWL) Spreadsheet


W

MDOTPhase II Stormwater Management Plan

http://www.michigan.gov/mdot/0,1607,7-151--114322--,00.htmlW

MDOTProgram/Project Management System Task Manuals


W

MDOTRoad Design Manual

http://mdotcf.state.mi.us/public/design/englishroadmanual/W

MDOTSoil Erosion And Sedimentation Control Manual

http://www.michigan.gov/documents/2006_SESC_Manual_165226_7.pdf

W

MDOTSpecial Details

http://mdotcf.state.mi.us/public/design/englishstandardplans/spdetails/

W

MDOTStandard Highway Signs



RFP 14Book 3


MDOTStandard Plans

http://mdotcf.state.mi.us/public/design/englishstandardplans/index.htm

W

MDOTStandards of Practice for Design Surveys

http://mdotwiki.state.mi.us/design/index.php/Chapter_1_-_Survey_Standards_Introduction

W

MDOT2012 Standard Specifications for Construction

http://mdotcf.state.mi.us/public/specbook/2012/W

MDOT

State Transportation Commission Policy on Context SensitiveSolutions, May 2005

http://www.michigan.gov/documents/MDOT_CSS_Policy_159545_7.pdf

W

MDOTSupplemental Specifications, 2012

http://mdotcf.state.mi.us/public/dessssp/spss/gotoview.cfm?ds=28W

MDOTSystem Operations Advisories


W

MDOTTraffic & Safety Advisories


W

MDOTTraffic and Safety Notes


MDOTTraffic Signal Details


MDOTTraffic Signing Standards and Special Details


MDOTTraffic Standards and Special Details


MDOTTraffic Standards, Typicals, Guides and Guidelines


MDOTState Transportation Commission Policy on Utility Accommodation

http://www.michigan.gov/documents/mdot/mdot_utility_accommodation_policy_355826_7.pdf

W


RFP 15Book 3


MDOTWork Zone Devices


MDOTWork Zone Safety and Mobility Manual

http://www.michigan.gov/documents/mdot/MDOT_WorkZoneSafetyAndMobilityManual_233891_7.pdf

W

MDOT

Work Zone Safety and Mobility Policy for Construction and UtilityPermits


W

MIOSHAMIOSHA Website

http://michigan.gov/lara/0,4601,7-154-11407---,00.htmlW

MilitarySpecifications MIL-A-8625 IS

National ElectricalManufacturersAssociation(NEMA)

Standards IS

National FireProtection Agency(NFPA)

National Electric Code, Current Year IS

National FireProtection Agency(NFPA)

NFPA 502: Standard for Road Tunnels, Bridged, and Other LimitedAccess Highways, 2014 Edition IS

National SpatialData Infrastructure(NSDI)

Geospatial Positioning Accuracy Standards, Part 3: NationalStandard for Spatial Data Accuracy, FGDC-STD-007.3-1998

http://www.fgdc.gov/standards/projects/FGDC-standards-projects/accuracy/part3

W

NationalTransportationCommunications forITS ProtocolStandards (NTCIP)

Standards IS

NCHRPReport 350, Recommended Procedures for the Safety PerformanceEvaluation of Highway Features

http://www.trb.org/main/blurbs/163269.aspxW


RFP 16Book 3


NEMA JointPublication/Insulated CableEngineersAssociation (ICEA)

NEMA WC70-2009 IS


NEMA WC71-1999 IS


NEMA WC74-2012 IS

NEMA JointPublication /Insulated CableEngineersAssociation (ICEA)

NEMA WC57-2004 IS

Telecommunications IndustriesAssociation (TIA)

Standards IS

The Society forProtective Coatings

SSPC-QP2, Qualification of Contractors for Hazardous PaintRemoval

http://www.sspc.org/sspc-qp-2-standard-for-evaluating-painting-contractors-hazardous-coating-removal.html

W

TIA 455-59-FOTP-59 IS

TIA 492AAAA IS

TIA 526-14-A-OFSTP-14 IS

TRB Highway Capacity Manual IS

US NationalArchives andRecordsAdministration

Code of Federal Regulations

http://www.gpo.gov/fdsys/browse/collectionCfr.action?collectionCode=CFR

W

US Army Corps ofEngineers (COE)

Wetlands Delineation Manual, January 1987

http://el.erdc.usace.army.mil/elpubs/pdf/wlman87.pdfW


RFP 17Book 3


US Department ofTransportation

National ITS Architecture

http://www.iteris.com/itsarch/W

USDA Rural Utilities Service (RUS) Specifications IS

USDARUS 7 CFR 1755.900

http://www.gpo.gov/fdsys/pkg/CFR-2003-title7-vol11/pdf/CFR-2003-title7-vol11-sec1755-900.pdf

W

US Access Board

Special Report” Accessible Public Rights-of-Way Planning andDesign for Alterations

https://www.access-board.gov/guidelines-and-standards/streets-sidewalks/public-rights-of-way/guidance-and-research/accessible-public-rights-of-way-planning-and-design-for-alterations

W

US Access Board Public Rights of Way Access Guidelines (PROWAG) IS

US General ServicesAdministration Federal Color Standard, 595, Rev B IS