Embed Size (px)
Citation preview
300-22-347-001-EH-0216.pdf
Meets Your Testing Needs.
Ultra-compact cell measurement module
The MCM-IntelliProbe-U10 allows a precise cell voltage monitoring of batte-ries, fuel cells and electrolyzers. It is as well suitable as a reference measuring device for battery management systems. The ultra-compact design, density and temperature resistance allows the application within test benches as well as the operation under harsh environmental conditions in mobile applications e.g. in the automotive or navy field. A separately sold automotive-qualified power sup-ply module allows the operation within 12 V and 24 V vehicle power systems.The wide range of applications allows the use in research and development as well as in series testing with continuous measurement technology.Process modules for measurement signal processing and combination with other modules of the MCM product family are available to enable a PC-inde-pendent operation and a free programmability via scripting engines.
(*) in combination with MCM-MainControl V2
MCM-IntelliProbe-U10
CORE FEATURES
► 10 serial concatenated measurement chan-
nels
► Switchable DC voltage range -1 … +5 V /
-3 … +3 V
► 16 bit resolution
► 1 sp … 1000 sp / sec
► Permanent galvanic isolation 1.400 VDC
► Ultra-compact: 20 measurement channels
smaller than 4” smartphone
► 1 out of 10 measuring channels optionally
as AC measurement, measuring range
± 50 mV, 10 ksp
► Configurable channel suppression
► Integrated wire break detection
► Extended temperature range for test bench
and automotive applications
► Communication via CAN and Ethernet (*)
300-22-347-001-EH-0216
300-22-347-001-EH-0216.pdf
Stan
d: O
kt. 2
015
Predestinated for the monitoring of
battery and fuel cell stacks
The intelligent stacking principle and the compact design have to be distinguished beside the excellent electrical and me-chanical properties such as accuracy and temperature range: SMART TESTSOLU-TIONS brings the Lego® principle within the multi-channel measuring technology.
The IntelliProbe modules as „smart sen-sors“ can be stacked similar to Lego® bricks. First module is always an MCM-IntelliProbe-Link for connection of power supply and communication, the last mo-dule is always a MCM-IntelliProbe-U10T for terminating the communication bus-ses.
The signal and power lines are thus di-rectly connected to each other internally without any additional wiring.
The modular IntelliProbe system allows configurations between 1 and 40 mea-surement modules (10 to 400 measuring channels). A further extension up to 44 is possible. For low-channel or low-speed applications the IntelliProbes can send the measurement data directly via CAN-bus. The use of a master module is not man-datory, allowing cost-effective solutions. The modules register hands-off via auto-configuration and start data acquisition independently. The measurement data of all modules are hereby recorded fully synchronized. For high-speed applica-tions, the IntelliProbe stack is connected to the process module (MasterModule). The data transfer will automatically switch to a high-speed LVDS-bus with optimized protocol.
ORDERING DETAILS
► SMART cell voltage monitoring system
► Scope of delivery: MCM-IntelliProbe-U10
(see basic configuration)
► Order number: 986-010295
BASIC CONFIGURATION ► MCM-IntelliProbe-LINK
(communication module) Order number: 986-010294
► MCM-IntelliProbe-U10T (termination measurement module) Order number: 986-010296
ADDITIONAL COMPONENTS ► MCM-IntelliProbe-INTERLINK
(stacking module) Order number: 986-010298
► MCM-IntelliProbe-MASTER (process module) Order number: 986-010278
► MCM-IntelliProbe-BREAKOUT (simulation and analysis module) Order number: 986-010269
For further information, see SMART MCM-IntelliProbe system overwiew.
TECHNICAL DATA MCM-IntelliProbe-U10
Measurement channels 10
Measurement range-1 V bis +5 V oder -3 V bis +3 V (switchable)
1 channel AC-measuring, ±50 mVAC
Sampling rates per channel DC 0/1/2/5/10/20/50/100/200/500/1.000 AC 2.000/5.000/10.000
Resolution 16 Bit
DC accuracy ±0,1 %
Galvanic isolation 60 sec min. 1.900 VACrms
Permanent galvanic isolation min. 1.400 VDC
Common-mode rejection 89 dB up to 1 kHz
Power supply 5 V / 160 mA
Power consumption 0,8 W typical
Data transfer CAN / LVDS
I/O-signals Clock I/O, Trigger IN, Trigger OUT 1+2, Error OUT
CAN-bus ISO11898, CAN 2.0B, 1 Mbit/s transfer rate
LVDS-bus 2 Kanäle, 10 Mbit/s transfer rate
Integrated temperature sensor ±2 °C (available in diagnosis mode)
Dimensions (LxWxH) 100 x 10,5 x 30 mm
Operating temperature range -25 °C bis +85 °C
IP protection class 20 % bis 60 %
Schutzart IP65 (EN60529)
MCM-IntelliProbe-U10
SMART TESTSOLUTIONS GmbH
300-22-347-001-EH-0216
Competitive sensor & power supply solutions worldwide
Headquarter Switzerland:Pewatron AG Thurgauerstrasse 66CH-8050 Zurich Phone +41 44 877 35 [email protected]
Offi ce Germany:Pewatron Deutschland GmbH Edisonstraße 16D-85716 UnterschleißheimPhone +49 89 374 288 [email protected]
Flow / Level / Medical products
Dr. Adriano PittarelliPhone +49 8245 774 95 [email protected]
Linear position sensorsAngle sensors
Eric LetschPhone + 41 44 877 35 14 [email protected]
Current sensorsPower solutions
Osman CobanPhone +49 71 635 363 [email protected]
Gas sensors / Gas sensor modulesLoad cells
Dr. Thomas ClausenPhone + 41 44 877 35 [email protected]
Power supplies
Sebastiano LeggioPhone + 41 44 877 35 [email protected]
Drive technologyCH Postcode 1000 – 4999 / AT / IT / FR
Christian MohrenstecherMobile +41 76 444 57 [email protected]
Pressure Sensors
Philipp KistlerPhone + 41 44 877 35 [email protected]
Accelerometers / LevelFlow sensor elements
Thorsten RavagniPhone +49 60 479 53 627 [email protected]
Drive technologyCH Postcode 5000 – 9999 / DE
Roman HomaMobile + 41 76 444 00 [email protected]
Sales Other Countries / Product Management
Sales International Key Accounts
Peter Felder
Phone + 41 44 877 35 05Mobile + 41 79 406 49 83
Postcode 1000 – 2999
Christian Mohrenstecher
Mobile +41 76 444 57 93
Sales Switzerland & Liechtenstein
Postcode 3000 – 9999
Basil Frei
Phone + 41 44 877 35 18Mobile + 41 76 279 37 26
Geometrical sensorsSensor elements
Thorsten Ravagni
Phone +49 60 479 53 627
Postcode 32000 – 37999Postcode 40000 – 79999
Gerhard Vetter
Phone + 49 674 394 75 75Mobile + 49 163 762 74 30
Sales Germany & Austria
Postcode 00000 – 31999 Postcode 38000 – 39999Postcode 80000 – 99999Austria
Kurt Stritzelberger
Phone + 49 89 260 52 80Mobile + 49 171 803 41 35
We are here for you. Addresses and Contacts.
