KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

MAZAK HYPER QUADREX 200 MSY

CNC turning milling center

Manufacturer MAZAK Model HYPER QUADREX 200 MSY Year of manufacture 2012 Control MAZATROL MATRIX 2 Machine number 234244

with counter spindle, 2 turrets, Y axis and bar loader

2 - MAZAK HYPER QUADREX 200 MSY

TECHNICAL DATA

Capacity

Chuck size 8.0 ‘‘

Maximum swing (upper turret) 370 mm

Maximum swing (lower turret) 320 mm

Maximum machining diameter (upper turret) 344 mm

Spindle

Rotating speed, max. 5.000 rpm

Rotating speed, max. (2nd spindle) 5.000 rpm

Rotating speed, min. 35 rpm

Rotating speed, min. (2nd spindle) 35 rpm

Motor output (30 minutes rating) 22.0 kW

Upper turret

Number of tools 12

Tool size (OD turning) 25 mm

Lower turret

Number of tools 12

Tool size (OD turning) 25 mm

EQUIPMENT

C axis counter spindle with coolant

Air blowing device for workpiece transfer (air is blown between the chucks during workpiece transfer)

Additional coolant nozzles on main spindle and counter spindle

2x HAINBUCH KOMBI AXFIX size: 65 – settled – KK6 Spanntop nova standard chuck

Y axis

2 turrets each with 12 tool places

Universal bar loader ILS-MUK-7016 for fast loading with controlled drive, two-stage feed system, motorized adjustment of material guidance, material separation and centering device, incl. rod d=12mm, SPS control, integrated terminal with touch screen, loading surface 500/630 mm x 1650 mm max. loading 450 kg, max. each bar 50 kg.

Workpiece unloading device with conveyor belt

Chip conveyor system Series III with 2 x high pressure coolant 70 bar consisting of:

- Chip conveyor system Series III (Dual type) - Filter system - Coolant unit - 2x high pressure coolant 70 bar - several pressure stages (controlled via M functions of the machine) - Extension of the coolant collecting container (required when spindle insert tubes protrude from the hollow cylinder of the lathe)

Overload monitoring system

Tool measuring station for each turret

Cylinder + Polar interpolation (Cylinder interpolation: With this function, the unwound cylinder surface can be used during programming. Polar interpolation: is used, for example, for machining a spiral groove on the end face)

Rotary hydraulic hollow clamping cylinders VNK-T2 160-67

Extended spindle liner tubes for LW 11 – 44 mm dynamically heaved

Extended spindle liner tubes for LW 45 – 74 mm dynamically heaved

Approx. 30 tool holders

User guide / Documentation / Machine parameters on CD

3 - MAZAK HYPER QUADREX 200 MSY

MACHINE PICTURES

4 - MAZAK HYPER QUADREX 200 MSY

5 - MAZAK HYPER QUADREX 200 MSY

6 - MAZAK HYPER QUADREX 200 MSY

TRANSPORT

7 - MAZAK HYPER QUADREX 200 MSY

Weight

Machine 12.400 kg

Coolant tank (without coolant liquid) 240 kg

Chip conveyor for side extraction 355 kg

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de