Embed Size (px)
Citation preview
MAY 2019
LATEST NEWSEmail: [email protected] No: +44(0)1909 504709
Mobile: 07974396271http://www.nfpc.co.uk
New Courses available-
NFPC launches NEW 4 Day Hydraulics Training Course for the OFFSHORE SECTORsee attached brochure for full details
Institution of Agricultural Engineers IAgrE. approve NFPC Training Courses and held their AGM and Awards Ceremony at the NFPC on the 2nd May- Over 60 members attended on the day and all where overwhelmed with the NFPC, its practical facilities and the services that it can offer the Agricultural Sector especially at a time when the Agricultural machines and systems are using advanced technology
PRACTICAL INTRODUCTION TO HYDRAULIC SIMULATION ANALYSIS delivered by Siemens and NFPCsee attached brochure for full details
PUWER Assessment of Machinery OR CE Marking of Machinerysee attached brochure for full details
Apprentice & Undergraduate Summer School July 2019see attached brochure for full details
New CETOP Level 2 Competence Based Qualifications- MOBILE or INDUSTRIALsee attached brochure for full details
IMPORTANT Message from the Director NEW TRAINING ENGINEERS REQUIREDDue to the increased demand for our specialist training courses involving Integrated Systems associated with Hydraulics, Pneumatics and Applied Electronics, we are looking to employ TWO more Training Engineers. SEE THE ATTACHED INFORMATION
Mathematics Applied to Hydraulic Systemssee attached brochure for full details
The NFPC is the only Approved Centre in the UK offering CETOP COMPETENCE BASED QUALIFICATIONS at Levels 1,2 and 3. We are seeing a greater demand by Employers for Employees attending courses at the NFPC to be formally assessed. With possible the best practical facilities in Europe and 10 of the UKs leading Training Engineers, our commitment to improve the overall performance of the UKs workforce across our 27 sectors of business remains our PRIORITY.
Construction Equipment Association (CEA) forms Professional Partnership with the NFPC, and plans to offer a range of NFPC specialist courses and Qualification to the Sector.
The NFPC with its vast experience looks forward to developing a close working relationship with the CEA and to play a part in their education and training strategy.
Courtesy of the CEA, the NFPC will be exhibiting at PLANT WORX at Peterborough in June
News
Page 2
News
Page 3
Page 4
Pages 5 & 6
Page 7
Pages 8 & 9
Page 10
ONE DAY TECHNICAL SEMINAR 30 May 2019 at the UK’s National Fluid Power Centre
FREE TO ATTEND- Register ASAP
“Fluid Power Safety in Modern Machinery”. Page 11
Scroll down
Vacancy for: Training Engineer, Integrated Systems-Hydraulics, Pneumatics, Applied Electronics
Salary circa £35,022 With potential progression to Systems Training Engineer based on annual Performance Review process
If you have a knowledge involving HYDRAULICS, PNEUMATICS and APPLIED ELECTRONICS and at least 3 years industry based experience involving the application of these technologies, you may well be ideal for this post. If you are a confident communicator and have experience involving: planning, installation, commissioning and fault diagnosis, then joining the team at the NFPC may well be the start of your new career.
The National Fluid Power Centre is a world leader in the provisionof short specialist training courses relating to hydraulics, pneumatics, electronics and control involving both mobile and industrial applications, with Electronics and Control seen as a growth area.
As a CETOP Certified Education Centre, the NFPC offers a range of competence based qualifications and you would be involved in both course delivery and assessments.
The centre works in some 27 different sectors and is the preferred training provider for many National and International companies. Our practical facilities are specifically designed to support the learning process for those involved in the maintenance and management of Integrated Systems and Control. Your role will involve the further developments of the practical facilities. You will also, with time have the opportunity to become a designated Course Manager/Lead Tutor (CM/LT)
Your appointment will significantly strengthen our existing technical teamas we embrace advances in control and automation at a systems level involving mobile and industrial hydraulic systems involving the very important interface of modern electronics. The NFPC is ISO 9001-2015 approved and a responsive centre meeting the needs of its customers on a global basis.
Have you got what it takes? Theoretical and practical expertise.Familiar with industry supply chains.Skilled in all aspects of technology functions, operations and applications.Have a technically based degree or HND/HNC.Additional CETOP Level 3 qualification would be advantageous.Good communication skills and the desire to transfer your vital knowledge and experience to improve the performance, role competency and employability of others. Some travelling globally to customer sites may be required
Enquiries please contact: Claire Humphries, [email protected] or 01709 722750To apply: www.rnngroup.co.uk/careers/vacanciesClosing date: 12/5/19
Page 2
Sta
ge 2
OF
FS
HO
RE
HY
DR
AU
LIC
S C
ou
rse
£1195.00 /pp +VAT
Candidates will receive a comprehensive set of; course notes,lunch, refreshments and a certificate of attendance
The COURSE HAS A VERY HIGH PRACTICAL CONTENT
Stage 2 Hydraulics- Supporting the
OFFSHORE SECTOR4 Days, 1pm Monday-12pm Friday
Designed for those involved in the maintenance and management of OFFSHORE Systems using Hydraulics and
Associated Controls.This course will focus on planning, installation, commissioning,
testing, fault prevention and fault diagnosis.
Winch Systems
Multi-Function
Valves
SpecialistPumps &Controls
DevelopedApril 19
Cranes Pipe Laying
Drilling & Production LARS
Accumulators
Stage 2 Hydraulics
Offshore4 Day Course
1.15 pm (Mon)-12.30pm (Fri)£1195.00 perperson +VAT
Planned Dates05-09 Aug
23-27 Sept30 Sep-04 Oct28 Oct-01 Nov
18-22 Nov
Page 3
Sta
ge 2
OF
FS
HO
RE
H
YD
RA
UL
ICS
C
ou
rse
£1195.00 /pp +VAT
Stage 2 Hydraulics(OFFSHORE)
(4 days)
Stage 1 Electrical/Electronics applied to Industrial Systems
(3 days)
Contact us for further information or to book your placeBookings & Customer Liaison ( Anne Clarke)
Tel: + 44 (0) 1909 504539 email: [email protected]
Visit our website www.nfpc.co.uk
ENTRY REQUIREMENTS
COURSE AIMS
COURSE OBJECTIVES – (KNOWLEDGE BASED)
COURSE OBJECTIVES – (SKILLS BASED)
Recommended Progression Route
Stage 1 Hydraulics or equivalent. If you feel that your experience takes you beyond Stage 1 Hydraulics, you could consider completing our self assessment questionnaire on line at www.nfpc.co.uk
1) To take your overall knowledge and skills to the next level to enable you to better manage and maintain complex hydraulic systems and controls associated with Offshore applications.
2) Ensure that you know the causes of failure in hydraulic systems and apply the necessary preventative measures and know the procedures to follow to carryout effective fault diagnosis.
CETOP LEVEL 2Competence
Based Qualification
(IH2) (5 day course)
On completion of this course candidates will know:
1) How important it is to be able to read and interpret machine and system circuit diagrams and match this to a working system.
2) The function, operation, control and setting up procedures of a range of components used in conjunction with Offshore Applications
3) The operation and performance of a range of hydraulic pumps, associated controls and setting up procedures.
4) The causes of failure in a hydraulic system and the symptoms to observe and the actions to be taken.
5) Risks associated with working on or close to hydraulic systems and the importance of following safe working practices at all times
CANDIDATES ARE ENCOURAGED TO BRING ALONG THEIR OWN CIRCUIT DIAGRAMS TO SUPPORT GROUP DISCUSSIONS
during the practical sessions of this course candidates will engage and apply the following skills:
1) Building a range hydraulic circuits by interpreting hydraulic circuit drawings and selecting appropriate components.
2) Setting up procedures covering a range of pressure, flow and load holding valves including screw in cartridge valves.
3) Connect the electrical interface to the hydraulic controls using manual switches and pressure switches.
4) Using a multi-meter to check the signal continuity of a solenoid operated valve when identified as a possible fault.
5) Setting up systems employing proportional control valves (pre-compensated) and load sensing axial piston pumps.
6) Follow correct procedures when carrying out fault diagnosis
Stage 1 Hydraulics
(3 days)
Use our on-line FOC
Self-Assessment
to check your starting
level
CETOP LEVEL 1Competence Based
Qualification (2 day course)
Optional Routes
Page 3
Course presented by Emmanuel Domingues,Senior System Simulation Engineer at SiemensIndustry Software Simulation and Test Ltd.Emmanuel, has 18 years of experience involved inSystem Simulation and Performance ImprovementsInvolving Hydraulics and Integrated Systems.
PRACTICAL INTRODUCTION TO HYDRAULIC SIMULATION ANALYSIS“Down-to-Earth” Approach including Practical Hydraulics
ONE DAY COURSE- 9am-4pm
Planned Course Dates for 2019 : 16 May, 12 SeptIntroductory Cost per person ExcVAT = £285.00
PRE-REQUISITEThis course can be a follow-on from the existing NFPC Principles of HydraulicSystem Design course or stand-alone. We recommend a pre-requisite level ofStage 2 Hydraulics. USE THE ONLINE SELF-ASSESSMENT www.nfpc.co.ukand check your current knowledge levels
Bookings & Customer Liaison ( Anne Clarke)Tel: + 44 (0) 1909 504539
email: [email protected]
Visit our website www.nfpc.co.uk
Course Aims: • KNOW THE BENEFITS OF HYDRAULIC SIMULATION FOR SYSTEM ANALYSIS• DIGITAL TWIN ANALYSIS OF A WORKING HYDRAULIC SYSTEM
Course Objectives:- on completion of this course you will:• Understand the application of software simulation of hydraulic systems• Know how to utilise component data sheets to parameterise models• Know the effects of Environment Conditions on simulation models• Identify the steps required to aid the validation process• Be able to create a VIRTUAL MODIFICATION process
Target Audience: Those involved in Hydraulic System Design, SystemModifications and Maintenance, and Managementof Integrated Systems involving Hydraulics
Page 4
AMC Machinery Safety & Compliance Training for 2019
(9am-4pm)
LocationNFPC LtdCarlton RoadWorksop, NottsS81 7HP
Presented by Les Young - MD and Principal Consultant at AMC. Les has over 14 years of experience relating to machine safety. He is a TUV Rhineland Certified Functional Safety Engineer, a Specialist Member of the International Institute for Safety and Risk Management and a Technical Member of IOSH and the IET. Each module will provide a “REAL WORLD” approach to clients needs and also the opportunity to seek advice relating to your specific applications.
Who is these modules aimed at? Anyone responsible for the Safety of Machinery on a site -Including: Site Engineers, Maintenance Managers / Engineers, Electricians, Health and Safety Managers and anyone involved in ensuring the safety of a Machinery.
PUWER Assessment of Machinery
Cost per person £325.00 Exc VatTo Reserve your place/s - Contact:
Bookings & Customer Liaison (Anne Clarke)Tel: + 44 (0) 1909 504539 email: [email protected]
The NFPC offers an extensive range of courses involving Hydraulics Pneumatics, Applied Electronics and Control, plus a range of CETOP Competence Based Qualifications. We also offer “On-Line” Self Assessments to assist you in selecting themost cost effective course progression route.
Visit our website- www.nfpc.co.uk
ASTUTE MACHINERY CONSULTANTS. For more informationVisit their website- www.astutemc.co.uk
Planned Dates:• 12 June • 30 August
This one day course will introduce candidates to the requirements of why (it is a legal requirement), who should do the assessment (a competent person), and the basics of how to PUWER assess a machine. The course content covers all aspects of PUWER assessment for static machinery, and on completion of this course, you will have a thorough understanding of the needs and requirements to enable appropriate PUWER assessments to be carried out on machinery
Page 5
AMC Machinery Safety & Compliance Training for 2019
(9am-4pm)
LocationNFPC LtdCarlton RoadWorksop, NottsS81 7HP
Presented by Les Young - MD and Principal Consultant at AMC. Les has over 14 years of experience relating to machine safety. He is a TUV Rhineland Certified Functional Safety Engineer, a Specialist Member of the International Institute for Safety and Risk Management and a Technical Member of IOSH and the IET. Each module will provide a “REAL WORLD” approach to clients needs and also the opportunity to seek advice relating to your specific applications.
Who is these modules aimed at? Anyone responsible for the Safety of Machinery -Including: Site Engineers, Maintenance Managers / Engineers and Electricians and anyone involved in Machinery Safety and Design.
This one day course will ensure that you know how to comply with the
Essential Health and Safety Requirements of the Machinery Directive, an
introduction to the risk assessment of machinery, creation of the technical
file and the Declaration of Conformity or Incorporation.
On completion of this course, you will have a thorough understanding of
the needs and requirements to CE mark machinery.
CE Marking of Machinery
Cost per person £325.00 Exc VatTo Reserve your place/s - Contact:
Bookings & Customer Liaison (Anne Clarke)Tel: + 44 (0) 1909 504539 email: [email protected]
The NFPC offers an extensive range of courses involving Hydraulics Pneumatics, Applied Electronics and Control, plus a range of CETOP Competence Based Qualifications. We also offer “On-Line” Self Assessments to assist you in selecting themost cost effective course progression route.
Visit our website- www.nfpc.co.uk
ASTUTE MACHINERY CONSULTANTS. For more information
Visit their website- www.astutemc.co.uk
Planned Date:• 5 July
Page 6
Ap
pre
nti
ce &
Un
de
rg
rauate
Su
mm
er
Sch
oo
l
£1350.00 /pp +VAT
Candidates will receive a comprehensive set of, course notes,lunch, refreshments and a certificate of attendance plus 18 hours of CPD
and a CETOP Level 1 Competence Based Qualification
The COURSES HAS A VERY HIGH PRACTICAL CONTENT
Apprentice & Undergraduate
Summer School July 2019
The National Fluid Power Centre has some of the BEST practical training facilities in Europe and
highly experienced Systems Training Engineers able to provide outstanding tuition and training to
YOUR Apprentices and Undergraduates. These are their FIRST STEPS TO INTEGRATED
SYSTEMS ENGINEERING adding vital knowledge and skills, enabling Employers to quickly
integrate new staff into existing maintenance teams
YOU WILL COMPLETE
Introduction to HydraulicsBasic Awareness Level
Stage 1Hydraulics
CETOP H1Hydraulics
This course covers 8 days of tuition, knowledge and skills developmentplus a written examination and ‘one-to-one’ practical assessment
JULY COURSE Planned Dates for Summer 2019Week 1. 15-19 JulyWeek 2. 22- 26 July
8 day course, starting 1pm Monday – 12-30 Fridayeach week
Preparing YOU for the world of work and improving your capability, employability and safe working practices
Page 7
Ap
pre
nti
ce &
Un
de
rg
radu
ate
Sum
mer
Sch
oo
l
£1350.00 /pp +VAT
None
1) To ensure candidates have a better overall knowledge and understanding of hydraulic system components, their function, operation and how they form a working circuit.
2) Improve communication levels as terminology is better understood, together with key aspects of health and safety, resulting in improved levels of safe working practices when working with and around hydraulic systems
Contact us for further information or to book your placeBookings & Customer Liaison ( Anne Clarke)
Tel: + 44 (0) 1909 504539 email: [email protected]
Visit our website www.nfpc.co.uk
ENTRY REQUIREMENTS
COURSE AIMS
Recommended Progression Route
We combine 3 established courses leading to a CETOP Recognised Qualification
This combination meets and exceeds the BFPA Minimum Education Recommendations for
Hydraulics at this level and supports the BFPA TRAINING PASSPORT.
YOU WILL COVER: fundamental hydraulic principles, symbols and circuitry, component function
and operation, hydraulic fluids and contamination control, hoses and couplings, maintenance
procedures and safe working practices.
This course has a HIGH Practical Content
YOU WILL build working circuits, go through setting up procedures and safe working practices,
investigate performance and record results. You will gain knowledge and skills to improve your
work based performance
FINALLY YOU WILL be further educated and trained to take the CETOP Level 1(H1)
Competence Based Qualification
This will involve a written and practical assessment to gain this CETOP recognised qualification
awarded in the UK by the BFPA.
Apprentice and Undergraduate Summer
School(8 days)
Stage 2 Hydraulics(Mobile, Industrial,
Offshore)(4 days)
Stage 1 Electrical/ElectronicsRelating to (Mobile
or Industrial Systems)(3 days)
Page 7
CE
TO
PIH
2 H
yd
rauli
cs Q
uali
fic
ati
on
£1470.00 /pp +VAT
Candidates will receive a comprehensive set of, course notes,lunch, refreshments
CETOP LEVEL 2 Competence Based Qualification(Industrial Hydraulics)
The NFPC is the UK’s LEAD Certified CETOP Education CentreThis qualification is designed for Craftsmen, Technicians and Advanced
Apprentices already involved with Hydraulic Systems across a range of applications and their role involves the need to have a higher level of knowledge and
Competence based skills
A NEW COMPETENCE BASED QUALIFICATION
FOLLOW ON FROM YOUR NFPC STAGE 2 INDUSTRIAL HYDRAULICS COURSE WITH THE NEW IH2 QUALIFICATION.
ALL COMPLETED IN ONE WEEK- Consisting of:• A ONE DAY ‘BRIDGING COURSE’ TO COMPLETE THE
KNOWLEDGE BASED PART OF THE IH2 SYLLABUS.• FOUR PRACTICAL TASKS TO ASSESS YOUR HYDRAULIC SKILLS• A TWO HOUR EXAM TO ASSESS YOUR HYDRAULIC KNOWLEDGE
(5 Day Course Monday – Friday 9am -5pm)Maximum 4 Candidates per course
One –To- One Practical Task Assessment
Important message- If it is over 12 months since you completed the Stage 2 Industrial Hydraulics Course here at the NFPC, we recommend that you return to REFRESH your knowledge by attending a scheduled Stage 2 Industrial Course. (Monday 1pm-Wednesday 12:30pm) Refresher Cost =£485.00 Exc VAT
Page 8
CE
TO
PIH
2 H
yd
rauli
cs Q
uali
fic
ati
on
£1470.00 /pp +VAT
Stage 1 Hydraulics
(3 days)
CETOP H1Competence Based
Qualification (2 days)Optional
Stage 2 HydraulicsIndustrial/Offshore)
(4 days)
CETOP IH2 Competence
Based Qualification
(5 days)
Contact us for further information or to book your placeBookings & Customer Liaison ( Anne Clarke)
Tel: + 44 (0) 1909 504539 email: [email protected]
Visit our website www.nfpc.co.uk
ENTRY REQUIREMENTS
Recommended Progression Route
CETOP IH2 LEVEL 2 Competence Based Qualification
MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY AM
Introduction,
followed by:
Practical Task
Preparation in
Technical Centre 2
Full Day
Practical Task
Assessments.
AM: Practical Task
Assessments
PM: Hydraulic Theory
Bridging Course from
NFPC Stage 2 to CETOP
IH2
AM: Hydraulic
Theory
Bridging Course
from NFPC Stage 2
to CETOP IH2
PM: Classroom
theory exercises
Revision and
exam techniques,
followed by IH2
Examination (two
hours)
Planned Schedule:
Knowledge based unit:
Hydraulic theory to cover
additional IH2 syllabus
subjects.
Half day classroom exercises
on typical content of IH2
exam.
Two hour examination with
60% pass mark.
Practical task assessments: ( one-to-one basis)
• Task 1: Carry out a routine maintenance inspection on a
hydraulic system using a prepared checklist, including
topping-up hydraulic oil.
Task 2: Carry out a pump commissioning exercise,
including writing a procedure.
Task 3: Replace a 4/3 way solenoid operated DCV on a
live system, including safe isolation and re-
commissioning.
Task 4: Build a hydraulic circuit for hydraulic sequencing
and set the pressure controls. Carry out a fault finding
exercise on the completed circuit.
NOTE: In the UK, the BFPA is the Awarding Body. Successful Candidates will have to register on-line at www.bfpa.co.uk to receive their certificate- Cost £50.00 Exc Vat
Pre-requisite courses we STRONGLY RECOMMEND:NFPC Stage 1 HydraulicsCETOP H1 Competence Based Qualification (Optional)NFPC Stage 1 Electrical/ Electronics (Industrial)NFPC Stage 2 Industrial Hydraulics and Refresher if over 12 Months has elapsed.
Page 8
CE
TO
P M
H2
Hyd
rauli
cs Q
ua
lifi
cati
on
£1470.00 /pp +VAT
Candidates will receive a comprehensive set of, course notes,lunch, refreshments
CETOP LEVEL 2 Competence Based Qualification(MH2- Mobile Hydraulics)
The NFPC is the UK’s LEADING Certified CETOP Education CentreThis qualification is designed for Craftsmen, Technicians and Advanced Apprentices currently involved with Hydraulic Systems. Covering a range of applications and roles, this qualification fulfils the need to establish a higher level of Knowledge and Competence Based Skills
A NEW COMPETENCE BASED QUALIFICATION
FOLLOW ON FROM YOUR NFPC STAGE 2 MOBILE HYDRAULICS COURSE WITH THE NEW MH2 QUALIFICATION?
Consisting of:• A ONE day ‘BRIDGING COURSE’ ensuring students have a complete
knowledge base for the MH2 QUALIFICATION.• FOUR Practical Tasks with Skill / Competence Assessment. • A TWO HOUR EXAM, to validate your HYDRAULIC SYSTEM KNOWLEDGE.
(5 Day Course – Monday to Friday 9am -5pm)Maximum 4 Candidates per course
One – To – One Practical Task Assessment
Important message- If it is over 12 months since you completed the Stage 2 Mobile Hydraulics Course here at the NFPC, we recommend that you return to REFRESH your knowledge by attending a scheduled Stage 2 Mobile Course. (Monday 1pm-Wednesday 12:30pm) Refresher Cost =£485.00 Exc VAT
Page 9
CE
TO
PM
H2
Hyd
rauli
cs Q
ua
lifi
cati
on
£1470.00 /pp +VAT
Pre-requisite courses we STRONGLY RECOMMEND:NFPC Stage 1 HydraulicsCETOP H1 Competence Based Qualification (Optional)NFPC Stage 1 Electrical/ Electronics (Mobile)NFPC Stage 2 Mobile Hydraulics and Refresher if over 12 Months has elapsed.
Stage 1 Hydraulics
(3 days)
CETOP H1Competence Based
Qualification (2 days)Optional
Stage 2 Mobile Hydraulics
(4 days)
CETOP MH2 Competence
Based Qualification
(5 days)
Contact us for further information or to book your placeBookings & Customer Liaison ( Anne Clarke)
Tel: + 44 (0) 1909 504539 email: [email protected]
Visit our website www.nfpc.co.uk
ENTRY REQUIREMENTS
Recommended Progression Route
CETOP MH2 LEVEL 2 Competence Based Qualification
Planned Schedule:
Knowledge based unit :
Hydraulic theory to cover
additional MH2 syllabus
subjects.
Half day classroom exercises
on typical content of MH2
exam.
Two hour examination with
60% pass mark.
NOTE: In the UK, the BFPA is the Awarding Body. Successful Candidates will have to register on-line at www.bfpa.co.uk to receive their certificate- Cost £50.00 Exc Vat
Practical based unit (One to One Assessment) :
• Task 1: Carry out a routine maintenance inspection on JCB 8015 using a prepared checklist.
• Task 2: Build and Test Mobile Steering and Axle system, including writing a procedure.
• Task 3: Carry out contamination assessment on a Mobile Machine JCB 8015.
• Task 4: Identify and Interpret a mobile machine circuit diagram CAT 906 Frame.
Page 9
Math
em
ati
cs A
ppli
ed t
o H
yd
rauli
c S
yste
ms
£300 /pp +VAT
Candidates will receive a comprehensive set of; course notes,lunch, refreshments and a certificate of attendance
Mathematics Applied to Hydraulic Systems
1 Day course- 9am-4pm Designed for staff at all levels involved with Hydraulic Systems and where
the use of mathematics and formulae are used to establish component sizes, performance and efficiency.
To many, this course will be an excellent REFRESHER and is definitely a recommendation to those planning to acquire a CETOP Level 2 or 3
Qualification.
DevelopedMay 19
This down-to-earth course will refer throughout to Hydraulic System Components and NFPCSystems Training Engineers will ensure that everything presented to you during this course willbe “useful” and help to improve your overall performance when Applied Mathematics are to be used. The Course will cover:
Basic formulae and units including transposition and BODMAS
Short form/fast track formulae and their application
Flow rates in pipes, hoses, fittings and valves- associated pressure drops
Cylinders- relationship between, pressure, area and force
Cylinders- relationship between dimensions, flow rates and speeds
Pumps – Input powers, size, flow rates and efficiencies including gear box torque efficiencies.
Laminar and Turbulent Flow, Reynolds Nos/Flushing
Hydraulic Motor Performance – pressure/torque relationship, speeds, flow rates and efficiencies
Moving Loads- Associated forces, load induced pressures and outside effects including intensification
Bookings & Customer Liaison ( Anne Clarke)Tel: + 44 (0) 1909 504539 email: [email protected]
Visit our website www.nfpc.co.uk
Planned Dates in 2019• 28 June• 26 July• 13 Sept• 25 Oct• 22 Nov
Page 10
The Global Leader in Pneumatic/Hydraulic Safety Solutionswww.rosscontrols.com
ONE DAY TECHNICAL SEMINAR 30 May 2019 at the UK’s National Fluid Power Centre
FREE TO ATTEND- Register ASAP
“Fluid Power Safety in Modern Machinery”.Key Speaker- Christopher D Brogli –Vice President for ROSS Controls and is a TUV Rheinland Functional Safety Expert.With over 31 years of active experience involving Global and National Standards for Machine and Process Safety, he has also held a number of leadership positions in global companies such as Rockwell Automation.This will be a unique opportunity for you to learn from his extensive knowledge and experience.
EVENT PLAN
• Arrive at NFPC-9:30 am- Registration & Refreshments• 10am-11:30am- Welcome Introduction, Technical Presentations• 11:30- 12:00- Product Exhibition & Networking• 12:00- 13:00- Group Buffet Lunch and visit around the NFPC• 13:00- 14:30 –Technical Presentations• 14:30- 14:45 – Refreshment Break• 14:45- 15:15 – Open Forum and Close
To Reserve your place-Contact Anne Clarke- Bookings and Customer Liaison at the [email protected] Tel No 01909 504539Venue Address- Carlton Rd, Worksop, Nottinghamshire, S81 7HPwww.nfpc.co.uk
Synopsis- These lectures will describe how Fluid Power is being used in modern machine applications with emphasis placed on: Dual pressure control for
safe welding systems Safe cylinder control
functions (Safe direction and safe stopping)
Task based isolation for all modes of operation
Remote Lock-out & tag-out systems for Fluid Power Safety
Page 11
